The instruction contains the following points:
Ⅰ. Z15 Server Check before Use
Ⅱ. Basic Descriptions of Z15 Server
Ⅲ. Use and Setup of Z15 Server
Ⅰ. Z15 Server Check Before Use
1.The Inspection of New Machine Signing
a、When signing for the new machine, please check whether the appearance of the package is damaged. If there it is damaged, please take the photo and contact customer service for processing immediately;
b、After unpacking, please check whether the server case is deformed, and whether the fan and connecting line are damaged. If there is any damage, please take the photo and contact customer service for processing immediately;
c、Check whether there is any abnormal sound of the server, if there is any abnormal sound, please contact customer service immediately;
2.Cautions
a、The server should be connected to a router or switch without POE function;
b、The server can only be connected to the router or switch by wire;
c、The recommended ambient temperature is 25~30℃;
d、The recommended ambient humidity is lower than 65%RH;
e、Pay attention to dust and foreign objects, so as not to corrode the computing board or affect the heat dissipation of the server;
f、It is recommended to use Google kernel browser or Firefox browser to browse the server background;
*Note: It is strictly forbidden to plug and unplug the power cord and signal line. The AC side of the server power supply must be reliably grounded.
Ⅱ. Basic Descriptions of Z15 Server
1.Server Appearance
*Note:
1、In the process of running the server, please place it as shown in the above picture, keep it flat to avoid any damage to the server.
2、The appliance coupler of this product needs to be grounded. The socket outlet should be installed near the product and should be easily accessible.
3、For your safety, it is forbidden to disassemble any screws and fixing straps of the product.
4、It is forbidden to press the metal button on the casing.
2.Main Components of Z15 Server
3.Z15 Server Specifications
Product Glance |
Value |
Version |
Z15 |
Model |
240Z |
Crypto Algorithm |
EquiHash |
Hash Rate(KSol/s) |
420 |
Input Voltage(DC) |
12V |
On-wall power consumption@25℃, Watt |
1510 |
Energy efficiency ratio @25°C, J/TH |
3.60 |
Hardware Configuration |
|
Network connection mode |
RJ45 Ethernet 10/100M |
Miner Size (Length*Width*Height, w/o package), mm(2-1) |
245*132.5*290 |
Net weight(kg) |
5.9 |
Environmental Requirements |
|
Operating temperature, °C |
0~40 |
Storage temperature, °C |
-20~70 |
Operating humidity (non-condensing), RH |
10~90% |
Operation altitude, m(3-1) |
≤2000 |
*Notes:
1、 If the chassis is deformed or the heat sink falls off, please do not turn on the power and contact the after-sales service.
2、It is recommended to use AntPool (www.antpool.com).
3、Interface description of the location of the air inlet of the server:
SD card SD card slot
IP Report Use IP Report software to feed back the IP of this server to the computer
ETH Cable interface
Reset Server factory reset button
Fault The flashing light indicates that the machine is malfunctioning in most cases
Normal The flashing light indicates that the machine is working properly in most cases
Ⅲ. The Usage and Setup of Z15 Server
1.The Wiring and Inspection of Z15 Server
a、Network cable connection: The ETH marked on the server interface panel is the network cable interface. Pay attention to the direction when inserting the cable. Please insert the crystal head in place. After inserting it in place, you will usually hear a soft sound of "click";
b、Power cable connection: Use 6 Pin interface to supply power to the server, a total of 10 connectors are required.
2.Enter the server
A、Find the server IP: After the power is supplied, the server starts to start, and after the green light of the server starts to flash, you can find the IP of the server. You can use the IP Report software to find the server IP as follows:
a、Download the software: https://service.bitmain.com.cn/support/download?product=IP-reporter;
b、Open the software and click "Start";
c、Press the IP button on the server;
d、Feedback server IP on the computer.
*Note: The server and the computer must be in the same network, otherwise the server feedback signal cannot be received.
B、Enter the server background
a、After finding the IP of the server, enter the obtained IP address in the webpage, and press Enter to enter;
b、In the pop-up dialog box, enter the user name and password (the user name and password are both root by default), and press Enter Enter;
3.Change server password
It is recommended to change the login password of the server web page after logging in to the server. The operation method is as follows:
a、Log in to the background of the server web page and click Administration;
b、Enter the current password for Current Password;
c、Enter the new password for New Password;
d、Enter the new password again for Confirmation, and then click to save;
4.Modify server IP
a、Click "Network" to enter the server IP configuration page, select "Static" in the protocol column (optional);
b、Enter the IP address, subnet mask, gateway, and DNS server in turn in the four boxes below;
c、Then click "Save". After the page buffering is completed, proceed to the next step;
d、If you don't know what the DNS server and gateway are, please check:https://support.bitmain.com/hc/zh-cn/articles/ 360018950053;
5.Configure mining pool miners (take ant mining pool as an example)
a、Click "Miner General Configuration" to enter the mining pool configuration page;
b、The address of the mining pool is filled in the URL;
c、Worker corresponds to the sub-account in the mining pool, and the number is the number that distinguishes the server; the payment address can be accessed through the Antpool backend Settings---Edit in configuration, please click the link to view. https://v3.antpool.com/setting;
d、The password does not need to be changed (the default is OK);
e、The percentage of fan speed can be adjusted, it is recommended to maintain the default setting. When the user does not check the fan speed percentage, the server will automatically adjust the fan speed;
f、After setting, click “Save” to save
6.Screenshot of the running status of the webpage in the background
7.Information of mining pool computing power
After the server is running, you can see the computing power information in the corresponding mining pool in about 30 minutes.
8.The configuration is complete here, congratulations on becoming a miner.
*Note: All of the above use AntPool by default. If you use other mining pools, please modify it to the address of the mining pool you want to use, and refer to the corresponding mining pool tutorial.
Should you have any inquiries, feel free to contact us for assistance.
Contact us > |
Comments
0 comments
Please sign in to leave a comment.