1. Visit our website to download the B3 firmware.
You will see that there are two firmware:
The first one, ANTMINER-B3-201805232020-750M.tar.gz, is to fix the fan speed display problem. The second one, update_1000.tar.gz, is to improve the hash rate of B3.
2. Upgrade the first one ANTMINER-B3-201805232020-750M.tar.gz
Do not power off or do anything to the miner during the firmware reloading or upgrading process. The whole process takes about 5 minutes. If it exceeds 10 minutes, abort and update again.
3. Set up your miner as per normal, acquire the IP and log in to the user interface of the miner.
4. Upgrade the second firmware update_1000.tar.gz
It will show “System Upgrade Success” if the upgrade is successful.
Again, do not power off or do anything to the miner during the firmware reloading or upgrading process. The whole process takes about 5 minutes. If it exceeds 10 minutes, abort and update again.
Otherwise the upgrade will fail and miner will be damaged.
If it fails all the time, or the ASIC status starts to show “??”, it means the miner is not working. Troubleshoot and create a repair ticket and return the hash board to us for repair.
Should you have any inquiries, feel free to contact us for assistance.
Contact us > |
Comments
0 comments
Article is closed for comments.