Newest ANTMINER Power Cord & PDU Adaptation Instructions

As the hashrate of ANTMINER continues to increase and its power of ANTMINER also increasing,  Particularly for S21 Serie miners , the ordinary PDUs and power cord can no longer carry the power. Therefore, we customize a dedicated plug/socket and special PDU to meet the the high-power needs of ANTMINER.

Important Notice:
For your safety, please use electronic device safely. Do not plug or remove the PSU cord when it is powered on! Please turn off PDU device first before plugging or removing the PSU cord if you need to take the miner off the shelf.

▷ANTMINER Dedicated Interface & ANTPDU Introduction

1. ANTMINER Dedicated Interface

1). Dedicated interface for Antminer P14 (as shown in P1), adapted to Antminer P13 plug, which used on S21, S19J XP;

2). ANTMINER P34 dedicated interface  （as shown in P2 ), adapted to to ANTMINER P33 plug,  which used on T21 ;

2. BITMAIN Dedicated ANTPDU PW12V1 PDU 

ANTPDU PW12V1 PDU  is compatible with single-phase/three-phase power,  also supporting old models (* requires dedicated power cord support) 。The details are shown in the pictures  below；

Click to purchase 

▷Which model has new interfaces, and how to choose and match the power cord?

1、T21 miner uses the newly developed P34 dedicated interface (as shown P1), which corresponds to the P33 plug (as shown in P2);

   T21 miner will be shipped with a P33-P33 special power cord(as shown in P3) with a length of 1.2m. Adapted to dedicated ANTPDU PW12V1 PDU (as shown  in P4).

                                           P1                                                                                 P2 

                                          P3                                                                                 P4

2、ANTMINER S21 and S19j XP use a P14 dedicated socket  (as shown in P1) and adapt to the P13 plug (as shown in P2).;

  ANTMINER  S21 and S19j XP are equippd with a dedicated C20-P13 power cable (as shown in P3) with a length of 1.2m ,which adapts to the current mainstream C19 interface PDU (as shown  in P4), it can be used directly without modification in most old mining farms.

                                        P1                                                                                       P2 

                                        P3                                                                                      P4

3、The P33-P13 power cord (as shown in P2) is only for S19j XP and S21, and needs to be used with ANTPDU PW12V1 PDU (as shown in P1).

Note:  The miner will be equipped with C20-P13 power cable by default,  if your order has not been shipped yet, you can contact your sales for exchange or purchase the P33-P13 dediacted power cable separately.

                                      P1                                                                                    P2

4、ANTMINER S19 series old models use the C14 interface  (as shown in P1) which adapts to the C13 plug.  Please note the miner is not equipped with a power cord, please purchase on your own. Click to view the Purchase standard reference

The interface is a standard interface which is generally equipped with the national standard PDU in China   (as shown in P2); Power cords are generally purchased with a product suffix (C13) (as shown in P3)

Note: The miner has two interfaces, each miner requires 2 power cables.

                             P1                                                 P2                                                    P3

5、If your miner uses ANTPDU PW12V1PDU  (as shown in P1), then you need to use dedicated P33-C13x2 power cord to adapt  it(as shown in P2);

Note: This line is devided into 2  lines, with a total length of 1.2m which needs to be purchased separately.

                                  P1                                                                                      P2

If you have any questions, please feel free to contact BITMAIN Customer Support.

< Contact us >