To be specific, the temperature of the miner's intake air should fall within this range.
Even if the room temperature is cool, the intake air temperature might still be too high because of the dust accumulation or other reasons. Please clean the miner if needed.
Different models display the miner's temperature differently. Notably, most of our miners have a protection program that puts the miners to shut down at temperature too high.
Below shows the normal temperature of the miners:
ANTMINER |
Temperature in degree Celsius |
E9 |
PCB max. 80 |
L7 |
PCB max. 80 |
S19XP |
PCB max. 75 |
S19a Pro |
PCB max. 80 |
S19a |
PCB max. 80 |
S19j |
PCB max. 85 |
S19j Pro |
PCB max. 85 |
S19 Pro |
PCB max. 80 |
S19 |
PCB max. 80 |
T19 |
PCB max. 80 |
Z15/Z15j/Z15e |
PCB max. 80 |
S17e/T17e/S17+ |
PCB max. 80 |
T17+ |
PCB max. 75 |
S17/S17 Pro/T17 |
PCB max. 75 |
S15 |
PCB max. 80 |
T15 |
PCB max. 80 |
S11 |
PCB max. 95 |
Z9MINI |
Chip max. 125 |
PCB max. 80 |
|
Z9 |
PCB max. 80 |
V9 |
PCB max. 80 |
S9 |
Chip max. 135 |
PCB max. 90 |
|
S9I |
PCB max. 85 |
S9j和S9-Hydro |
PCB max. 95 |
T9 |
Chip max. 135 |
PCB max. 90 |
|
T9+ |
Chip max. 125 |
PCB max. 95 |
|
S9 SE/S9k |
PCB max. 85 |
B7 |
PCB max. 75 |
K5 |
PCB max. 80 |
D5 |
PCB max. 85 |
DR3和DR5 |
PCB max. 85 |
E3 |
PCB max. 65 |
L3+和L3++ |
PCB max. 90 |
D3 |
PCB max. 85 |
A3 |
Chip max. 115 |
PCB max. 85 |
|
X3 |
Chip max. 127 |
PCB max. 80 |
|
B3 |
Chip max. 127 |
PCB max. 80 |
If you notice that the temperatures are climbing and nearing the temperature limit, contact us for assistance and technical advice.
If you have any questions, please feel free to contact BITMAIN Customer Support.
![]() |
< Contact us > |
Comments
0 comments
Article is closed for comments.