First, know the ANTMINER’s power consumption and load of the wires you are using.
Most ANTMINERs’ power consumption is above 1000 W. Let’s assume it’s 1600 W.
- For a 4 mm2 copper wire, the safe load is 35 A (8000 W)
- For a 6 mm2 copper wire the safe load is 48 A (10500 W)
- For a 10 mm2 copper wire, the safe load is 65 A (14300 W)
Second, know your household appliances’ power consumption.
Below are some examples:
|
Air conditioning 1.5 HP |
3000 W |
|
Electrical water heater |
3000 W |
|
Microwave |
1000 W |
|
Rice cooker |
800 W |
|
Heater |
2500 W |
|
Drinking fountain |
1200 W |
|
Electrical kettle |
1500 W |
Third, calculate the power consumption.
Add up all the household appliances power consumption together with the ANTMINERs’ in your home. If the power consumption is higher than the safe load, you can’t use the ANTMINERs at home.
*NOTE: The sound can get very loud when the miner is running and you are not advised to stay in the same room where the miner is running. Run your miner in a place where the noise is not a cause for concern.
Should you have any inquiries, feel free to contact us for assistance.
 |
Contact us > |
Comments
0 comments
Article is closed for comments.