Specifications and other information of ANTMINER S21XP Hyd in the tables below:
Product Glance | Value |
Model | S21 XP Hyd |
Sub | 473T |
Version | 10 |
Crypto algorithm/coins | SHA256|BTC/BCH/BSV |
Typical hashrate, TH/s(1-1) | 473 |
Power on wall @35℃(1-1), Watt(1-1) | 5676 |
Power efficiency on wall@35℃(1-1), J/T(1-1) | 12.0 |
Detailed Characteristics | Value |
Power supply | |
Power supply AC input voltage, Volt(2-1) | 380~415V AC |
Power supply AC input frequency range, Hz | 50~60 |
Power supply AC input current, Amp(2-2) | 12 |
Hardware configuration | |
Networking connection mode | RJ45 Ethernet 10/100M |
Server size (length*width*height, w/o package), mm | 339*173*207 |
Server size (length*width*height, with package), mm | 570*316*430 |
Net weight, kg | 13.8 |
Gross weight, kg | 15.7 |
Environment requirements | |
Inlet water temperature, °C(2-3) | 20~50 |
Water flow, L/min | 8.0~10.0 |
Water pressure, bar | ≤3.5 |
Working fluid(2-4) | Antifreeze/ Deionized water/ Pure water |
Liquid PH | 8.5~9.5 |
Diameter of water pipe connector, mm | DN10 |
Storage temperature, °C | -20~70 |
Operation humidity(non-condensing), RH | 10~90% |
NOTE:
(1-1) The hashrate value, power on wall, and power efficiency on wall are all typical values. The actual hashrate value fluctuates by ±3%, and the actual Power on wall and Power efficiency on wall fluctuate by ±5%.
(1-2) Inlet water temperature.
(2-1) Caution: Wrong input voltage may cause server damaged.
(2-2) Three-phase AC input, 12A max.
(2-3) If the inlet water temperature is lower than 20 °C, the miner cannot be started. For the external dry cooler (EC2-DT),
if the outlet water temperature is 35°C, the maximum ambient temperature is 30°C;
if the outlet water temperature is 45°C, the maximum ambient temperature is 40°C;
if the outlet water temperature is 50°C, the maximum ambient temperature is 45°C.
(2-4) If the water conductivity is ≥100 μs/cm, the fluid must be replaced. The water conductivity is less than 20 μs/cm when the system is running at the first time.
If you have any questions, please feel free to contact BITMAIN Customer Support.
< Contact us > |
Comments
0 comments
Please sign in to leave a comment.