Getting a power cord for your PSU
Power cord is not included in the package, get one that adheres to your local standards. Our APW series uses the C13 cord (normal desktop power cord).
Get a power cord that is at least 10 A. The length should be 1.5 m or less.
Use multiple or different PSUs on a miner
Use one PSU for one miner. The miner can receive power from different PSUs, but each hash board can only receive from just one PSU.
IMPORTANT: Do not use multiple PSUs to power one hash board.
The 6-pin power connectors are interchangeable so the sequence doesn’t matter when connecting the connectors to the miner.
Starting voltage and rated power
Starting voltage is the required voltage of wall outlet to get your PSU working and deliver power to the miner. The starting voltage of this PSU must be at least 205 V.
This PSU cannot be used in countries with main power voltage lower than 205 V.
The rated power of APW3+ is 1600 W at 220 V, which means one APW3+ has 10 PCIE connectors that could power one S9/T9/L3+.
Download the user guide for more information. The specifications can be found in the user guide.
Troubleshooting, warranty & repair
A 365-day warranty is provided commencing from the item's dispatch date.