S9K after SD card flashed, doesn't have have hashrate

已回答

评论

3 条评论

  • 正式评论

    Dear

    Could you advise us which S9K version you used? could you send us the screenshot firstly ?

    and please also send us full kernel log after the miner running 15mins to double check 

     

    评论操作 固定链接

    Good day 

    Sorry for the late reply, S9k was solved by change another name of pool worker, but for s9i still have the same problem. I have upgraded the last version of firmware, and the sd card flashed by using S9T+. And on the log it basis of no error on it

    Thanks a lot

    [ 0.000000] Booting Linux on physical CPU 0x0
    [ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
    [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    [ 0.000000] Machine model: Xilinx Zynq
    [ 0.000000] cma: CMA: reserved 128 MiB at 16800000
    [ 0.000000] Memory policy: Data cache writealloc
    [ 0.000000] On node 0 totalpages: 126976
    [ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
    [ 0.000000] Normal zone: 992 pages used for memmap
    [ 0.000000] Normal zone: 0 pages reserved
    [ 0.000000] Normal zone: 126976 pages, LIFO batch:31
    [ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
    [ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
    [ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
    [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
    [ 0.000000] Virtual kernel memory layout:
    [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
    [ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
    [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    [ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
    [ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
    [ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
    [ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [ 0.000000] NR_IRQS:16 nr_irqs:16 16
    [ 0.000000] ps7-slcr mapped to df802000
    [ 0.000000] zynq_clock_init: clkc starts at df802100
    [ 0.000000] Zynq clock init
    [ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
    [ 0.000296] ps7-ttc #0 at df804000, irq=43
    [ 0.000603] Console: colour dummy device 80x30
    [ 0.000632] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
    [ 0.040200] pid_max: default: 32768 minimum: 301
    [ 0.040412] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [ 0.040431] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [ 0.042604] CPU: Testing write buffer coherency: ok
    [ 0.042924] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [ 0.042981] Setting up static identity map for 0x4cb118 - 0x4cb170
    [ 0.043202] L310 cache controller enabled
    [ 0.043222] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
    [ 0.120988] CPU1: Booted secondary processor
    [ 0.210223] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [ 0.210353] Brought up 2 CPUs
    [ 0.210372] SMP: Total of 2 processors activated.
    [ 0.210380] CPU: All CPU(s) started in SVC mode.
    [ 0.211054] devtmpfs: initialized
    [ 0.213494] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    [ 0.214701] regulator-dummy: no parameters
    [ 0.221713] NET: Registered protocol family 16
    [ 0.223935] DMA: preallocated 256 KiB pool for atomic coherent allocations
    [ 0.226202] cpuidle: using governor ladder
    [ 0.226216] cpuidle: using governor menu
    [ 0.233592] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
    [ 0.235109] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    [ 0.235123] hw-breakpoint: maximum watchpoint size is 4 bytes.
    [ 0.235235] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
    [ 0.256821] bio: create slab <bio-0> at 0
    [ 0.258217] vgaarb: loaded
    [ 0.258913] SCSI subsystem initialized
    [ 0.259802] usbcore: registered new interface driver usbfs
    [ 0.259973] usbcore: registered new interface driver hub
    [ 0.260922] usbcore: registered new device driver usb
    [ 0.261701] media: Linux media interface: v0.10
    [ 0.261858] Linux video capture interface: v2.00
    [ 0.262094] pps_core: LinuxPPS API ver. 1 registered
    [ 0.262105] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [ 0.262234] PTP clock support registered
    [ 0.262590] EDAC MC: Ver: 3.0.0
    [ 0.263766] Advanced Linux Sound Architecture Driver Initialized.
    [ 0.266514] DMA-API: preallocated 4096 debug entries
    [ 0.266529] DMA-API: debugging enabled by kernel config
    [ 0.266601] Switched to clocksource arm_global_timer
    [ 0.287070] NET: Registered protocol family 2
    [ 0.287710] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.287766] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.287851] TCP: Hash tables configured (established 4096 bind 4096)
    [ 0.287893] TCP: reno registered
    [ 0.287911] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [ 0.287939] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [ 0.288183] NET: Registered protocol family 1
    [ 0.288484] RPC: Registered named UNIX socket transport module.
    [ 0.288497] RPC: Registered udp transport module.
    [ 0.288505] RPC: Registered tcp transport module.
    [ 0.288514] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 0.288526] PCI: CLS 0 bytes, default 64
    [ 0.288954] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
    [ 0.290943] futex hash table entries: 512 (order: 3, 32768 bytes)
    [ 0.293050] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
    [ 0.293238] msgmni has been set to 967
    [ 0.294002] io scheduler noop registered
    [ 0.294015] io scheduler deadline registered
    [ 0.294053] io scheduler cfq registered (default)
    [ 0.306984] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
    [ 0.307005] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    [ 0.432191] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
    [ 0.999594] console [ttyPS0] enabled
    [ 1.003852] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
    [ 1.011469] [drm] Initialized drm 1.1.0 20060810
    [ 1.028530] brd: module loaded
    [ 1.037941] loop: module loaded
    [ 1.047648] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 1.053393] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 1.061346] libphy: XEMACPS mii bus: probed
    [ 1.065711] ------------- phy_id = 0x3625e62
    [ 1.070481] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
    [ 1.079094] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.085709] ehci-pci: EHCI PCI platform driver
    [ 1.092941] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
    [ 1.099790] usbcore: registered new interface driver usb-storage
    [ 1.106650] mousedev: PS/2 mouse device common for all mice
    [ 1.112731] i2c /dev entries driver
    [ 1.119689] zynq-edac f8006000.ps7-ddrc: ecc not enabled
    [ 1.125178] cpufreq_cpu0: failed to get cpu0 regulator: -19
    [ 1.131079] Xilinx Zynq CpuIdle Driver started
    [ 1.135926] sdhci: Secure Digital Host Controller Interface driver
    [ 1.142072] sdhci: Copyright(c) Pierre Ossman
    [ 1.146365] sdhci-pltfm: SDHCI platform and OF driver helper
    [ 1.153241] mmc0: no vqmmc regulator found
    [ 1.157278] mmc0: no vmmc regulator found
    [ 1.196619] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    [ 1.205300] usbcore: registered new interface driver usbhid
    [ 1.210811] usbhid: USB HID core driver
    [ 1.215509] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    [ 1.221799] nand: Micron MT29F2G08ABAEAWP
    [ 1.225772] nand: 256MiB, SLC, page size: 2048, OOB size: 64
    [ 1.231711] Bad block table found at page 131008, version 0x01
    [ 1.237923] Bad block table found at page 130944, version 0x01
    [ 1.243972] 3 ofpart partitions found on MTD device pl353-nand
    [ 1.249746] Creating 3 MTD partitions on "pl353-nand":
    [ 1.254845] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
    [ 1.262936] 0x000002000000-0x00000b000000 : "angstram-rootfs"
    [ 1.270237] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
    [ 1.280977] TCP: cubic registered
    [ 1.284216] NET: Registered protocol family 17
    [ 1.288910] Registering SWP/SWPB emulation handler
    [ 1.294787] regulator-dummy: disabling
    [ 1.299120] UBI: attaching mtd1 to ubi0
    [ 1.688951] UBI: scanning is finished
    [ 1.700746] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
    [ 1.707825] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    [ 1.714568] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    [ 1.721270] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    [ 1.728129] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
    [ 1.734098] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    [ 1.741229] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1495195
    [ 1.749998] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
    [ 1.759216] UBI: background thread "ubi_bgt0d" started, PID 1084
    [ 1.759222] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
    [ 1.763179] ALSA device list:
    [ 1.763182] No soundcards found.
    [ 1.780002] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
    [ 1.887458] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    [ 1.893382] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    [ 1.902515] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    [ 1.912398] UBIFS: reserved for root: 0 bytes (0 KiB)
    [ 1.917438] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 5738C7A7-BFF6-4ED2-9D03-AA7C4A93929C, small LPT model
    [ 1.957597] VFS: Mounted root (ubifs filesystem) on device 0:11.
    [ 1.988389] devtmpfs: mounted
    [ 1.991495] Freeing unused kernel memory: 204K (c06db000 - c070e000)
    [ 3.137634] random: dd urandom read with 1 bits of entropy available
    [ 3.716613]
    [ 3.716613] bcm54xx_config_init
    [ 4.786644]
    [ 4.786644] bcm54xx_config_init
    [ 8.787465] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
    [ 8.793566] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
    [ 38.666846] In axi fpga driver!
    [ 38.669919] request_mem_region OK!
    [ 38.673309] AXI fpga dev virtual address is 0xdf9fe000
    [ 38.678443] *base_vir_addr = 0xc51e
    [ 38.694062] In fpga mem driver!
    [ 38.697192] request_mem_region OK!
    [ 38.700692] fpga mem virtual address is 0xe2000000
    [ 39.486649]
    [ 39.486649] bcm54xx_config_init
    [ 40.586654]
    [ 40.586654] bcm54xx_config_init
    [ 44.587459] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
    [ 44.593562] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
    [ 480.905799] random: nonblocking pool is initialized
    main.c:13992: log_level = 4
    main.c:14019: This is XILINX board. Totalram: 507486208
    main.c:14031: Detect 512MB control board of XILINX
    driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fbd000
    driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
    driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5db6000
    driver-bitmain.c:994: forceFreq=-1 forceFlag=0
    driver-bitmain.c:1696: min work minertest[0]:912


    main.c:8570: DETECT HW version=0000c51e
    main.c:14064: miner ID : 813885ca4e10481c
    main.c:14089: Miner Type = S9
    main.c:14101: AsicType = 1387
    main.c:14104: real AsicNum = 63
    main.c:14197: use critical mode to search freq...
    driver-bitmain.c:1876: get PLUG ON=0x000000e0
    driver-bitmain.c:1946: Find hashboard on Chain[5]
    driver-bitmain.c:1946: Find hashboard on Chain[6]
    driver-bitmain.c:1946: Find hashboard on Chain[7]
    main.c:2282: Check chain[5] PIC fw version=0x03
    main.c:2282: Check chain[6] PIC fw version=0x03
    main.c:2282: Check chain[7] PIC fw version=0x03
    main.c:8940: read pic freq and badcore num...
    main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    main.c:9003: has freq in PIC, will disable freq setting.
    main.c:9099: chain[5] has freq in PIC and will jump over...
    main.c:9103: Chain[5] has core num in PIC
    main.c:2282: Check chain[5] PIC fw version=0x03
    main.c:8940: read pic freq and badcore num...
    main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    main.c:9003: has freq in PIC, will disable freq setting.
    main.c:9099: chain[6] has freq in PIC and will jump over...
    main.c:9103: Chain[6] has core num in PIC
    main.c:9113: Chain[6] ASIC[44] has core num=1
    main.c:9113: Chain[6] ASIC[58] has core num=1
    main.c:2282: Check chain[6] PIC fw version=0x03
    main.c:8940: read pic freq and badcore num...
    main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    main.c:9003: has freq in PIC, will disable freq setting.
    main.c:9099: chain[7] has freq in PIC and will jump over...
    main.c:9103: Chain[7] has core num in PIC
    main.c:9113: Chain[7] ASIC[50] has core num=4
    main.c:2282: Check chain[7] PIC fw version=0x03
    main.c:9183: get PIC voltage=6 on chain[5], value=940
    main.c:9183: get PIC voltage=6 on chain[6], value=940
    main.c:9183: get PIC voltage=6 on chain[7], value=940
    main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,36,28
    main.c:9366: chain[5] temp chip I2C addr=0x98
    main.c:9372: chain[5] has no middle temp, use special fix mode.
    main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,35,28
    main.c:9366: chain[6] temp chip I2C addr=0x98
    main.c:9372: chain[6] has no middle temp, use special fix mode.
    main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,35,28
    main.c:9366: chain[7] temp chip I2C addr=0x98
    main.c:9372: chain[7] has no middle temp, use special fix mode.
    main.c:13956: total_exist_chain_num = 3
    board_frq_tuning.c:628: single_board_frq_tuning enter
    board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
    board_frq_tuning.c:254: force_freq not set, don't need tuning
    main.c:14645: restart Miner chance num=2
    main.c:14685: waiting for receive_func to exit!
    main.c:14699: waiting for pic heart to exit!
    main.c:13927: bmminer not found= 2002 root 0:00 grep bmminer

    main.c:14758: bmminer not found, restart bmminer ...
    main.c:13927: bmminer not found=10688 root 0:00 grep bmminer

    main.c:14758: bmminer not found, restart bmminer ...
    driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
    driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
    driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
    driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:26 CST 2019 type: Antminer S9i
    driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 813885ca4e10481c
    driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4440
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4440
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=4800
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4440
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=4800
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4440
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=4800
    driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
    driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
    driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
    driver-btm-c5.c:13171:bitmain_c5_init: Chain[J6] has backup chain_voltage=890
    driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
    driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
    driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
    driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
    driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
    driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=890
    driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
    driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
    driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4b 0x00 0x4b 0x04 0x4b 0x0b 0x4b 0x00 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x01 0x4b 0x01 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x05 0x4b 0x07 0x4b 0x23 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b
    driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
    driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
    driver-btm-c5.c:13171:bitmain_c5_init: Chain[J8] has backup chain_voltage=870
    driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
    driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
    driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
    driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=6 value=940
    driver-btm-c5.c:13320:bitmain_c5_init: Chain[J6] will use backup chain_voltage_pic=890 [91]
    driver-btm-c5.c:13330:bitmain_c5_init: Chain[J6] get working chain_voltage_pic=91
    driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=6 value=940
    driver-btm-c5.c:13320:bitmain_c5_init: Chain[J7] will use backup chain_voltage_pic=890 [91]
    driver-btm-c5.c:13330:bitmain_c5_init: Chain[J7] get working chain_voltage_pic=91
    driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=6 value=940
    driver-btm-c5.c:13320:bitmain_c5_init: Chain[J8] will use backup chain_voltage_pic=870 [125]
    driver-btm-c5.c:13330:bitmain_c5_init: Chain[J8] get working chain_voltage_pic=125
    driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
    driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
    driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
    driver-btm-c5.c:4571:set_frequency: miner total rate=0GH/s ideal_total_hash_rate = 0GH/s

    driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
    driver-btm-c5.c:5119:set_frequency: max freq = 100
    driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 0, fixed_totalRate = 0
    driver-btm-c5.c:9604:init_uart_baud: set baud=1
    driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
    driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
    setStartTimePoint total_tv_start_sys=909 total_tv_end_sys=910
    driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = -100
    driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
    do read_temp_func once...
    Done check_asic_reg
    Max pcb temp : -100
    set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=0 fix_fan_steps=0
    FAN PWM: 0
    read_temp_func Done!
    CRC error counter=47

    0
    评论操作 固定链接

    Dear

    We checked 3 hashboard can not be detected .could you send us your email address we will send you S9K SD card file 

    For the hashboard which can not be detected ,please try to exclude the issues by the below instructions

    1.check the wires for the hashboard--pull them and re-plug them again, and also you can try to change the new wires
    2.upgrade to the latest firmware 
    3. change the PSU to try it and reset the miner to the factory settings
    4.flash the SD card program to recover the control board
    instructions:
    https://support.bitmain.com/hc/en-us/articles/360033757513-S17-S17Pro-S9-SE-S9k-Z11-control-board-program-recovery-SD-card-flashing-with-customized-PW-

    0
    评论操作 固定链接

请先登录再写评论。