S19Pro Power conection on 2 Phase of 230V

已回答
关注
Peter

Hi.

I want to inquire about powering my new S19Pro miner.

This Miner has two power inputs.The total consumption is about 3600W, so the load on one phase is then 15 Amps. I would like the load to be divided into two phases, so that I do not load only one phase. The load would then be divided into 7 Amps  + 7 Amps.

The question is: Is it possible to connect the S19Pro to two different phases ???

Connect First input to L1 - 230V & Second input to L2 - 230V ??

Thanks for answer :-)

 

 

1

评论

12 条评论

日期 投票数
  • 正式评论
    Nick

    Dear Peter

    Power consumption refer to the power consumption of two power lines at the same time, not one after the other

    评论操作 固定链接
  • Peter
    • 已编辑于

    Hi Jessica, thank you for the reply.

    I don't know if we understand each other.

    I am giving an example of a connection from two different phases.

    Is it possible to power it this way?

    It's about reducing the load of one phase from 15A to 7.5A.

     

    0
    评论操作 固定链接
  • Peter

    Now I have it wired to one phase but this is taking on one phase of 15 A.

    0
    评论操作 固定链接
  • Nick

    Dear

    If it meet  the requirements of 200-240v  which will be okay

    0
    评论操作 固定链接
  • Peter

    Hi Jessica

    The 230V condition will be met.
    But I don't know if the input ports in the Power suppli are connected together, the power supply and the whole device can be damaged !!
    Therefore, it is important for me to express a technically capable person from the Manufacturer.

    Is it possible to verify it directly in production?

    Thanks

    0
    评论操作 固定链接
  • Nick

    Dear

    If the input voltage is  220 V you meet, which will be okay  or else not meet it which will not be okay

    0
    评论操作 固定链接
  • Khalid

    Dear Peter, was it ok to run it on 2 separate phases? thanks

    0
    评论操作 固定链接
  • Peter

    Dear Khalid,

    Unfortunately, I did not get a clear answer from support that it will be OK :-(.

    I don't want to risk destroying the machine for 12000 Euros.

    So my answer is that I didn't try. If you try, please let me know.

    My goal was to reduce the load to one phase.

    0
    评论操作 固定链接
  • Khalid

    That's fine thanks though, actually I also asked my dealer in China and he asked the manufacturer and he replied back that it is fine, I did not try as I still don't need to but I would most likely be ok with trying it once required.

     

    good luck my friend

    0
    评论操作 固定链接
  • Enrique

    Tested working on a 3x25A connection with an S19J Pro 92T:

    First C13 cable to APW12 PSU connected to L1: 1354W, 234V, 5.89A

    Second C13 cable to APW12 PSU connected to L2: 1404W, 234V, 6.09A

    The two inputs are on a 2 pole 10A fuse.

    1
    评论操作 固定链接
  • Jayson Jones

    Makes sense to keep one machine on one phase in case one phase goes down

    0
    评论操作 固定链接
  • Nick

    Dear Customer,

    If you have any questions please feel free to contact us.

    Please send email to customersupport@bitmain.com

    We will reply to your question as soon as possible.

    0
    评论操作 固定链接

请先登录再写评论。

没有找到您要找的？

新建帖子