Replace Hashboard T17e
已回答
I have antminer T17e with 1 hashboard off. I have plan to replace the off hashboard with another one. I have already plug to the connector cable. After I turn on the machine, the machine cannot start, because some error voltage.
Any idea how to fixed it ?
This is the error :
2021-05-10 03:44:34:driver-btm-api.c:2172:get_calibration_voltage: calibration voltage is error data.
2021-05-10 03:44:34 voltage[1] = 1860
2021-05-10 03:44:34 voltage[2] = 1800
2021-05-10 03:44:34 voltage[3] = 1840
2021-05-10 03:44:34:driver-btm-api.c:486:check_chain_conf_same: Config are different, min = 1800, max = 1860, diff is too large.
2021-05-10 03:44:34:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed
2021-05-10 03:44:34:driver-btm-api.c:247:set_miner_status: ERROR_SOC_INIT
2021-05-10 03:44:34:driver-btm-api.c:176:stop_mining: stop mining: soc init failed!
2021-05-10 03:44:34:driver-btm-api.c:147:killall_hashboard: ****power off hashboard****
-
正式评论
Dear
For the SOC issue ,please kindly try to exclude the troubleshooting by the below instructions firstly
1 Check the power line,plug it and unplug it to test
2 restore to the factory settings,
3 manually configure the miner configuration
4 flash the sd card file to recover to the control board评论操作 -
Hi Jessica
Thanks for your responseI have try no 1-3, but not success
I try to relocate the cable also not success
For the sd card flash, is it the latest SD Firmware for T17e (2020-09-27) ?I can't find specific instruction to flash sd card firmware
Is this instruction applicable ?Many Thanks
-
Dear
1 you can upgrade the latest firmware as below
https://service.bitmain.com/support/download?product=Antminer%20T17e
2 if you want to flash the sd card file to recover to the control board
Please download the SD card file in the below link
https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image
instructions:
1 unzip the file we send to you
2 After decompressing the card file, put all the below files into the card,
3 insert it into the card slot of the control board,
4 and power on the control board
5 after the red and green lights blinks 3 or more times you can remove the SD card , it is ok
-
Hi Jessica
Thanks for your guide
I have try to flash the sd card, it has already blink 3 times
But, when I reboot again, I get some error. I put the kernel log on below.After that, I upgrade to the latest firmware.
The machine able to run 2 hashboard only.
Is it related with the problem after flash the sd card ?
RegardsHere is the error after flash the sd card:
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203648K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25728K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12688K (cce9c000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 13/5, WL threshold: 4096, image sequence number: 262741923
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 709
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 712
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 10383/8423, WL threshold: 4096, image sequence number: 3563076859
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 721
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 724
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
2021-05-14 04:39:44:driver-btm-api.c:542:init_freq_mode: This is fix-freq version
2021-05-14 04:39:44:driver-btm-api.c:1850:bitmain_soc_init: Miner compile time: Thu Nov 21 14:00:27 CST 2019 type: Antminer T17e
2021-05-14 04:39:44:driver-btm-api.c:1851:bitmain_soc_init: commit version: fe37dcc 2019-11-20 19:23:24, build by: parallels 2019-11-21 14:00:18
2021-05-14 04:39:44:driver-btm-api.c:1852:bitmain_soc_init: opt_multi_version = 1
2021-05-14 04:39:44:driver-btm-api.c:1853:bitmain_soc_init: opt_bitmain_ab = 1
2021-05-14 04:39:44:driver-btm-api.c:1854:bitmain_soc_init: mid_auto_gen = 0
2021-05-14 04:39:44:driver-btm-api.c:1855:bitmain_soc_init: opt_bitmain_work_mode = 2
2021-05-14 04:39:44:driver-btm-api.c:1669:show_sn: no SN got, please write SN to /nvdata/sn
2021-05-14 04:39:44:fan.c:248:front_fan_power_on: Note: front fan is power on!
2021-05-14 04:39:44:fan.c:260:rear_fan_power_on: Note: rear fan is power on!
2021-05-14 04:39:44:driver-btm-api.c:1006:miner_device_init: Detect 256MB control board of XILINX
2021-05-14 04:39:44:driver-btm-api.c:947:init_fan_parameter: fan_eft : 1 fan_pwm : 100
2021-05-14 04:39:50:driver-btm-api.c:931:init_miner_version: miner ID : 8114350618c08854
2021-05-14 04:39:50:driver-btm-api.c:937:init_miner_version: FPGA Version = 0xB023
2021-05-14 04:39:52 [chain 0]
0x0000 96 13 01 00 59 44 46 54 59 48 39 41 49 41 42 42
0x0010 44 30 4B 39 39 00 00 00 0A 01 00 01 01 01 01 04
0x0020 29 41 42 5A 5A 5A 5A DB 96 13 71 65 71 65 71 71
0x0030 71 71 71 71 65 65 71 71 71 71 65 65 65 71 71 71
0x0040 65 71 65 71 71 71 65 71 65 71 71 65 71 71 71 65
0x0050 71 65 71 71 65 71 71 71 71 65 65 65 71 71 71 71
0x0060 71 71 71 71 65 65 65 65 71 71 71 71 71 65 71 71
0x0070 65 71 71 71 71 65 65 71 44 07 F6 3E 00 00 00 00
0x0080 01 00 AE 44 07 FF FF FF FF FF FF FF FF FF FF FF
0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF F5 8E2021-05-14 04:39:52 fixture_header : 0x1396
2021-05-14 04:39:52 fixture_version : 0x0001
2021-05-14 04:39:52 hash_board_sn : YDFTYH9AIABBD0K99
2021-05-14 04:39:52 pcb_version : 0x010a
2021-05-14 04:39:52 bom_version : 0x0100
2021-05-14 04:39:52 product_id : 0x01
2021-05-14 04:39:52 board_bin : 0x01
2021-05-14 04:39:52 chip_ft : A4V41
2021-05-14 04:39:52 chip_bin : BIN1
2021-05-14 04:39:52 chip_version : AB
2021-05-14 04:39:52
2021-05-14 04:39:52 miner_header : 0x1396
2021-05-14 04:39:52 work_mode_count : 0x01
2021-05-14 04:39:52 miner_bin : 0x00
2021-05-14 04:39:52 [mode 0]
2021-05-14 04:39:52 voltage : 1860
2021-05-14 04:39:52 ideal_hash_rate : 16118
IC[000]:565 IC[001]:505 IC[002]:565 IC[003]:505 IC[004]:565 IC[005]:565
IC[006]:565 IC[007]:565 IC[008]:565 IC[009]:565 IC[010]:505 IC[011]:505
IC[012]:565 IC[013]:565 IC[014]:565 IC[015]:565 IC[016]:505 IC[017]:505
IC[018]:505 IC[019]:565 IC[020]:565 IC[021]:565 IC[022]:505 IC[023]:565
IC[024]:505 IC[025]:565 IC[026]:565 IC[027]:565 IC[028]:505 IC[029]:565
IC[030]:505 IC[031]:565 IC[032]:565 IC[033]:505 IC[034]:565 IC[035]:565
IC[036]:565 IC[037]:505 IC[038]:565 IC[039]:505 IC[040]:565 IC[041]:565
IC[042]:505 IC[043]:565 IC[044]:565 IC[045]:565 IC[046]:565 IC[047]:505
IC[048]:505 IC[049]:505 IC[050]:565 IC[051]:565 IC[052]:565 IC[053]:565
IC[054]:565 IC[055]:565 IC[056]:565 IC[057]:565 IC[058]:505 IC[059]:505
IC[060]:505 IC[061]:505 IC[062]:565 IC[063]:565 IC[064]:565 IC[065]:565
IC[066]:565 IC[067]:505 IC[068]:565 IC[069]:565 IC[070]:505 IC[071]:565
IC[072]:565 IC[073]:565 IC[074]:565 IC[075]:505 IC[076]:505 IC[077]:565
2021-05-14 04:39:54 [chain 1]
0x0000 96 13 01 00 48 51 44 5A 59 48 39 41 49 41 42 4A
0x0010 46 30 44 32 37 00 00 00 0A 01 00 01 01 01 03 04
0x0020 04 41 42 5A 5A 5A 72 55 96 13 7C 78 7C 7C 78 7C
0x0030 7C 78 7C 7C 7C 78 78 78 7C 7C 7C 7C 7C 7C 7C 78
0x0040 7C 78 7C 78 7C 7C 7C 78 78 7C 7C 7C 7C 78 7C 7C
0x0050 78 7C 78 7C 7C 78 7C 7C 7C 78 78 7C 7C 7C 78 7C
0x0060 7C 78 7C 7C 7C 78 78 7C 7C 7C 78 7C 7C 7C 78 7C
0x0070 78 7C 78 7C 7C 78 7C 7C 30 07 60 47 00 00 00 00
0x0080 01 00 00 00 00 FF FF FF FF FF FF FF FF FF FF FF
0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 8A EB2021-05-14 04:39:54 fixture_header : 0x1396
2021-05-14 04:39:54 fixture_version : 0x0001
2021-05-14 04:39:54 hash_board_sn : HQDZYH9AIABJF0D27
2021-05-14 04:39:54 pcb_version : 0x010a
2021-05-14 04:39:54 bom_version : 0x0100
2021-05-14 04:39:54 product_id : 0x01
2021-05-14 04:39:54 board_bin : 0x01
2021-05-14 04:39:54 chip_ft : A4V4
2021-05-14 04:39:54 chip_bin : BIN3
2021-05-14 04:39:54 chip_version : AB
2021-05-14 04:39:54
2021-05-14 04:39:54 miner_header : 0x1396
2021-05-14 04:39:54 work_mode_count : 0x01
2021-05-14 04:39:54 miner_bin : 0x00
2021-05-14 04:39:54 [mode 0]
2021-05-14 04:39:54 voltage : 1840
2021-05-14 04:39:54 ideal_hash_rate : 18272
IC[000]:620 IC[001]:600 IC[002]:620 IC[003]:620 IC[004]:600 IC[005]:620
IC[006]:620 IC[007]:600 IC[008]:620 IC[009]:620 IC[010]:620 IC[011]:600
IC[012]:600 IC[013]:600 IC[014]:620 IC[015]:620 IC[016]:620 IC[017]:620
IC[018]:620 IC[019]:620 IC[020]:620 IC[021]:600 IC[022]:620 IC[023]:600
IC[024]:620 IC[025]:600 IC[026]:620 IC[027]:620 IC[028]:620 IC[029]:600
IC[030]:600 IC[031]:620 IC[032]:620 IC[033]:620 IC[034]:620 IC[035]:600
IC[036]:620 IC[037]:620 IC[038]:600 IC[039]:620 IC[040]:600 IC[041]:620
IC[042]:620 IC[043]:600 IC[044]:620 IC[045]:620 IC[046]:620 IC[047]:600
IC[048]:600 IC[049]:620 IC[050]:620 IC[051]:620 IC[052]:600 IC[053]:620
IC[054]:620 IC[055]:600 IC[056]:620 IC[057]:620 IC[058]:620 IC[059]:600
IC[060]:600 IC[061]:620 IC[062]:620 IC[063]:620 IC[064]:600 IC[065]:620
IC[066]:620 IC[067]:620 IC[068]:600 IC[069]:620 IC[070]:600 IC[071]:620
IC[072]:600 IC[073]:620 IC[074]:620 IC[075]:600 IC[076]:620 IC[077]:620
2021-05-14 04:39:56 [chain 2]
0x0000 96 13 01 00 48 51 44 5A 59 48 39 41 49 41 42 4A
0x0010 46 30 44 4A 4C 00 00 00 0A 01 00 01 01 01 03 04
0x0020 04 41 42 5A 5A 5A A2 02 96 13 6E 72 72 70 6E 70
0x0030 6E 70 72 6E 70 72 70 72 6E 70 72 6E 6E 6E 70 72
0x0040 72 70 70 6E 72 70 72 6E 6E 70 6E 72 72 70 6E 72
0x0050 70 6E 72 70 72 70 70 72 6E 6E 70 72 70 6E 72 6E
0x0060 6E 72 70 6E 72 70 72 70 72 6E 70 6E 6E 72 6E 70
0x0070 70 72 70 72 6E 70 6E 72 30 07 32 41 00 00 00 00
0x0080 01 00 00 00 00 FF FF FF FF FF FF FF FF FF FF FF
0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF A5 302021-05-14 04:39:57 fixture_header : 0x1396
2021-05-14 04:39:57 fixture_version : 0x0001
2021-05-14 04:39:57 hash_board_sn : HQDZYH9AIABJF0DJL
2021-05-14 04:39:57 pcb_version : 0x010a
2021-05-14 04:39:57 bom_version : 0x0100
2021-05-14 04:39:57 product_id : 0x01
2021-05-14 04:39:57 board_bin : 0x01
2021-05-14 04:39:57 chip_ft : A4V4
2021-05-14 04:39:57 chip_bin : BIN3
2021-05-14 04:39:57 chip_version : AB
2021-05-14 04:39:57
2021-05-14 04:39:57 miner_header : 0x1396
2021-05-14 04:39:57 work_mode_count : 0x01
2021-05-14 04:39:57 miner_bin : 0x00
2021-05-14 04:39:57 [mode 0]
2021-05-14 04:39:57 voltage : 1840
2021-05-14 04:39:57 ideal_hash_rate : 16690
IC[000]:550 IC[001]:570 IC[002]:570 IC[003]:560 IC[004]:550 IC[005]:560
IC[006]:550 IC[007]:560 IC[008]:570 IC[009]:550 IC[010]:560 IC[011]:570
IC[012]:560 IC[013]:570 IC[014]:550 IC[015]:560 IC[016]:570 IC[017]:550
IC[018]:550 IC[019]:550 IC[020]:560 IC[021]:570 IC[022]:570 IC[023]:560
IC[024]:560 IC[025]:550 IC[026]:570 IC[027]:560 IC[028]:570 IC[029]:550
IC[030]:550 IC[031]:560 IC[032]:550 IC[033]:570 IC[034]:570 IC[035]:560
IC[036]:550 IC[037]:570 IC[038]:560 IC[039]:550 IC[040]:570 IC[041]:560
IC[042]:570 IC[043]:560 IC[044]:560 IC[045]:570 IC[046]:550 IC[047]:550
IC[048]:560 IC[049]:570 IC[050]:560 IC[051]:550 IC[052]:570 IC[053]:550
IC[054]:550 IC[055]:570 IC[056]:560 IC[057]:550 IC[058]:570 IC[059]:560
IC[060]:570 IC[061]:560 IC[062]:570 IC[063]:550 IC[064]:560 IC[065]:550
IC[066]:550 IC[067]:570 IC[068]:550 IC[069]:560 IC[070]:560 IC[071]:570
IC[072]:560 IC[073]:570 IC[074]:550 IC[075]:560 IC[076]:550 IC[077]:570
2021-05-14 04:39:57:thread.c:719:create_read_nonce_reg_thread: create thread
2021-05-14 04:39:57:eeprom.c:867:display_board_info: chain[0] board bin: 1, chip bin: 1, chip ft: A4V41, chip version: AB
2021-05-14 04:39:57:eeprom.c:867:display_board_info: chain[1] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
2021-05-14 04:39:57:eeprom.c:867:display_board_info: chain[2] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
2021-05-14 04:39:57:driver-btm-api.c:1772:bitmain_board_init: board adapt failed, exit
2021-05-14 04:39:57:driver-btm-api.c:191:set_miner_status: ERROR_SOC_INIT
2021-05-14 04:39:57:driver-btm-api.c:132:stop_mining: stop mining: soc init failed!
2021-05-14 04:39:57:thread.c:764:cancel_read_nonce_reg_thread: cancel thread
2021-05-14 04:39:57:driver-btm-api.c:117:killall_hashboard: ****power off hashboard**** -
Dear
If all the instructions are not available please ship it back to our repair site to double check
please ship to the HK repair site or the USA -NH repair site to double check
We are sorry that your miner is defective , please unplug then reboot it again , if still can not work please refer to this link to prepare to ship the miner or part to us :https://service.bitmain.com/support/guide
Please check this link to create a repair ticket, Please always click " apply for repair "How to create/revise a repair ticket
to send the defective unit/part to us to have a repair.
Best regards
请先登录再写评论。
评论
5 条评论