T17e reboots every 5 mimutes socket connection refused
已回答
-
正式评论
Dear
Could you send us full kernel log to double check after the miner running 15 mins ?
评论操作 -
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 195704K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 33672K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 20632K (cc6db000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x00000cb00000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 785845037
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 1078138B-C0FB-4EDF-ABEB-8DB46F88B6CA, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 3/2, WL threshold: 4096, image sequence number: 3405847874
ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 0A192F25-F7E3-4FE5-9FA8-B42ABA862D22, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb54000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2021-05-05 14:41:09:thread.c:1555:create_bitmain_soc_init_thread: create thread
2021-05-05 14:41:09:driver-btm-api.c:682:init_freq_mode: This is scan-user version
2021-05-05 14:41:09:driver-btm-api.c:2518:bitmain_soc_init: Miner compile time: Fri Jan 8 22:35:06 CST 2021 type: Antminer T17e
2021-05-05 14:41:09:driver-btm-api.c:2519:bitmain_soc_init: commit version: 37668c9 2021-01-08 18:20:11, build by: jenkins 2021-01-08 22:39:58
2021-05-05 14:41:09:driver-btm-api.c:2520:bitmain_soc_init: opt_multi_version = 1
2021-05-05 14:41:09:driver-btm-api.c:2521:bitmain_soc_init: opt_bitmain_ab = 1
2021-05-05 14:41:09:driver-btm-api.c:2522:bitmain_soc_init: mid_auto_gen = 0
2021-05-05 14:41:09:driver-btm-api.c:2523:bitmain_soc_init: work_mode = 0
2021-05-05 14:41:09:driver-btm-api.c:2524:bitmain_soc_init: power_feedback_en = true
2021-05-05 14:41:09:driver-btm-api.c:2067:show_sn: no SN got, please write SN to /config/sn
2021-05-05 14:41:09:driver-btm-api.c:1384:miner_device_init: Detect 256MB control board of XILINX
2021-05-05 14:41:09:driver-btm-api.c:1325:init_fan_parameter: fan_eft : 1 fan_pwm : 100
2021-05-05 14:41:15:driver-btm-api.c:1309:init_miner_version: miner ID : 810cb50a5c20881c
2021-05-05 14:41:15:driver-btm-api.c:1315:init_miner_version: FPGA Version = 0xB023
2021-05-05 14:41:19:auto_adapt.c:100:_get_board_info: chain[2] board bin: 1, chip bin: 2, chip ft: A4V2, chip version: AB
2021-05-05 14:41:19:auto_adapt.c:100:_get_board_info: chain[3] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
2021-05-05 14:41:19:driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
2021-05-05 14:41:19 voltage[2] = 1840
2021-05-05 14:41:19 voltage[3] = 1840
2021-05-05 14:41:19:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed
voltage_ref = 1840
2100 2100 2100 2100 2100 2100
2100 2100 2100 2100 2100 2100
2100 2100 2100 2100 2100 2100
2100 2100 2100 2100 2100 2060
2100 2100 2100 2100 2070 2020
2070 2060 2060 2050 2020 1970
2020 2010 2010 2000 1980 1920
1980 1970 1960 1950 1910 1860
1980 1970 1960 1950 1910 18602021-05-05 14:41:19:thread.c:1523:create_read_nonce_reg_thread: create thread
2021-05-05 14:41:19:driver-btm-api.c:698:dump_pcb_bom_version: Chain [2] PCB Version: 0x010a
2021-05-05 14:41:19:driver-btm-api.c:699:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2021-05-05 14:41:19:driver-btm-api.c:698:dump_pcb_bom_version: Chain [3] PCB Version: 0x010a
2021-05-05 14:41:19:driver-btm-api.c:699:dump_pcb_bom_version: Chain [3] BOM Version: 0x0100
2021-05-05 14:41:26:driver-btm-api.c:2344:bitmain_board_init: Fan check passed.
2021-05-05 14:41:27:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-05-05 14:41:29:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2021-05-05 14:41:30:board.c:81:jump_and_app_check_restore_pic: chain[3] PIC jump to app
2021-05-05 14:41:32:board.c:94:jump_and_app_check_restore_pic: Check chain[3] PIC fw version=0x88
2021-05-05 14:41:32:thread.c:1518:create_pic_heart_beat_thread: create thread
2021-05-05 14:41:33:power_api.c:241:power_init: power type version: 0x0042
2021-05-05 14:41:35:power_api.c:259:power_init: Power init:
2021-05-05 14:41:35:power_api.c:260:power_init: current_voltage_raw = 2002
2021-05-05 14:41:35:power_api.c:261:power_init: highest_voltage_raw = 2000
2021-05-05 14:41:35:power_api.c:262:power_init: working_voltage_raw = 1800
2021-05-05 14:41:35:power_api.c:263:power_init: higher_voltage_raw = 1850
2021-05-05 14:41:35:power_api.c:264:power_init: check_asic_voltage_raw = 1800
2021-05-05 14:41:35:driver-btm-api.c:2354:bitmain_board_init: Enter 60s sleep to make sure power release finish.
2021-05-05 14:42:37:driver-btm-api.c:1123:check_asic_number_until_volt_balance: THIS is No.1 time boost asic:
2021-05-05 14:42:37:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800
2021-05-05 14:42:40:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
2021-05-05 14:42:55:uart.c:69:set_baud: set UART baud to 115200
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-05-05 14:42:59:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 78 asic, times 0
chain 3, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-05-05 14:43:03:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[3]: find 78 asic, times 0
2021-05-05 14:43:03:driver-btm-api.c:1163:check_asic_number_until_volt_balance: PASS: volt balance at No.1 time boost asic.
2021-05-05 14:43:03:power_api.c:364:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step.
2021-05-05 14:43:22:driver-hash-chip.c:876:set_uart_relay: set uart relay to 0x330003
2021-05-05 14:43:22:driver-hash-chip.c:1264:set_ldo_ctrl: Set LDO to 0x2000203
2021-05-05 14:43:23:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
chain 2 domain 0: d0 0.389, d1 0.378, d2 0.389, d3 0.385, sum = 1.540527
chain 2 domain 1: d0 0.368, d1 0.363, d2 0.365, d3 0.349, sum = 1.445374
chain 2 domain 2: d0 0.409, d1 0.408, d2 0.410, d3 0.409, sum = 1.636658
chain 2 domain 3: d0 0.390, d1 0.386, d2 0.407, d3 0.394, sum = 1.576599
chain 2 domain 4: d0 0.406, d1 0.406, d2 0.381, d3 0.398, sum = 1.590454
chain 2 domain 5: d0 0.385, d1 0.379, d2 0.378, d3 0.356, sum = 1.498230
chain 2 domain 6: d0 0.369, d1 0.368, d2 0.369, d3 0.361, sum = 1.466980
chain 2 domain 7: d0 0.420, d1 0.413, d2 0.429, d3 0.420, sum = 1.681885
chain 2 domain 8: d0 0.371, d1 0.366, d2 0.370, d3 0.371, sum = 1.478333
chain 2 domain 9: d0 0.400, d1 0.376, d2 0.365, d3 0.362, sum = 1.503540
chain 2 domain 10: d0 0.382, d1 0.371, d2 0.375, d3 0.365, sum = 1.492371
chain 2 domain 11: d0 0.354, d1 0.347, d2 0.360, d3 0.348, sum = 1.408447
chain 2 domain 12: d0 0.368, d1 0.361, d2 0.356, d3 0.363, sum = 1.448425
2021-05-05 14:43:23:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 3 with 0 regs timeout.
chain 3 domain 0: d0 0.394, d1 0.391, d2 0.366, d3 0.383, sum = 1.533630
chain 3 domain 1: d0 0.379, d1 0.368, d2 0.366, d3 0.378, sum = 1.491821
chain 3 domain 2: d0 0.375, d1 0.380, d2 0.379, d3 0.365, sum = 1.498108
chain 3 domain 3: d0 0.396, d1 0.386, d2 0.396, d3 0.392, sum = 1.569275
chain 3 domain 4: d0 0.380, d1 0.380, d2 0.363, d3 0.373, sum = 1.496033
chain 3 domain 5: d0 0.371, d1 0.370, d2 0.385, d3 0.359, sum = 1.485168
chain 3 domain 6: d0 0.367, d1 0.363, d2 0.349, d3 0.359, sum = 1.437805
chain 3 domain 7: d0 0.372, d1 0.361, d2 0.381, d3 0.344, sum = 1.458923
chain 3 domain 8: d0 0.407, d1 0.413, d2 0.395, d3 0.405, sum = 1.619690
chain 3 domain 9: d0 0.377, d1 0.380, d2 0.359, d3 0.372, sum = 1.487976
chain 3 domain 10: d0 0.383, d1 0.382, d2 0.392, d3 0.355, sum = 1.511963
chain 3 domain 11: d0 0.389, d1 0.392, d2 0.380, d3 0.387, sum = 1.547852
chain 3 domain 12: d0 0.380, d1 0.380, d2 0.379, d3 0.358, sum = 1.496338
2021-05-05 14:43:24:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-05-05 14:43:25:temperature.c:272:calibrate_temp_sensor_one_chain: chain 2 temp sensor TMP451
2021-05-05 14:43:26:temperature.c:272:calibrate_temp_sensor_one_chain: chain 3 temp sensor TMP451
2021-05-05 14:43:32:driver-btm-api.c:311:check_bringup_temp: Bring up temperature is 35
2021-05-05 14:43:32:uart.c:69:set_baud: set UART baud to 3000000
2021-05-05 14:43:32 voltage[2] = 1840
2021-05-05 14:43:32 voltage[3] = 1840
2021-05-05 14:43:32:power_api.c:272:set_working_voltage_raw: working_voltage_raw = 1840
2021-05-05 14:43:32:thread.c:1538:create_check_miner_status_thread: create thread
2021-05-05 14:43:32:thread.c:1528:create_show_miner_status_thread: create thread
2021-05-05 14:43:32:thread.c:1503:create_temperature_monitor_thread: create thread
2021-05-05 14:43:32:thread.c:1580:create_fan_monitor_thread: create thread
2021-05-05 14:43:32:frequency.c:578:inc_freq_with_fixed_vco: chain = 255, freq = 610, is_higher_voltage = true
2021-05-05 14:43:38:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 37, chip_temp 41 ~ 45, now 6.0s, target 46.0
2021-05-05 14:43:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 37, chip_temp 42 ~ 45, now 7.0s, target 46.2
2021-05-05 14:43:40:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 37, chip_temp 42 ~ 45, now 8.0s, target 46.3
2021-05-05 14:43:41:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 37, chip_temp 42 ~ 45, now 9.0s, target 46.5
2021-05-05 14:43:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 37, chip_temp 42 ~ 45, now 10.0s, target 46.7
2021-05-05 14:43:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 37, chip_temp 42 ~ 45, now 11.0s, target 46.8
2021-05-05 14:43:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 37, chip_temp 42 ~ 45, now 12.0s, target 47.0
2021-05-05 14:43:44:frequency.c:657:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 62
2021-05-05 14:43:44:frequency.c:665:inc_freq_with_fixed_vco: set to 62M, get pcb 36 ~ 37, chip_temp 42 ~ 45
2021-05-05 14:43:44:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2100, step by step.
2021-05-05 14:43:54:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:43:54:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 62 clock_counter_limit 6, no check, skip.
2021-05-05 14:44:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 38, chip_temp 44 ~ 47, now 30.5s, target 50.1
2021-05-05 14:44:02:frequency.c:657:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 72
2021-05-05 14:44:02:frequency.c:665:inc_freq_with_fixed_vco: set to 72M, get pcb 36 ~ 38, chip_temp 44 ~ 47
2021-05-05 14:44:02:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:44:02:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 72 clock_counter_limit 8, no check, skip.
2021-05-05 14:44:10:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 39, chip_temp 44 ~ 48, now 38.5s, target 51.4
2021-05-05 14:44:10:frequency.c:657:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 84
2021-05-05 14:44:10:frequency.c:665:inc_freq_with_fixed_vco: set to 84M, get pcb 36 ~ 39, chip_temp 44 ~ 48
2021-05-05 14:44:10:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:44:10:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 84 clock_counter_limit 10, no check, skip.
2021-05-05 14:44:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 39, chip_temp 45 ~ 49, now 46.5s, target 52.8
2021-05-05 14:44:18:frequency.c:657:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 87
2021-05-05 14:44:18:frequency.c:665:inc_freq_with_fixed_vco: set to 87M, get pcb 36 ~ 39, chip_temp 45 ~ 49
2021-05-05 14:44:18:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:44:18:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 87 clock_counter_limit 10, no check, skip.
2021-05-05 14:44:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 40, chip_temp 45 ~ 49, now 54.5s, target 54.1
2021-05-05 14:44:26:frequency.c:657:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 101
2021-05-05 14:44:26:frequency.c:665:inc_freq_with_fixed_vco: set to 101M, get pcb 37 ~ 40, chip_temp 45 ~ 49
2021-05-05 14:44:26:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:44:26:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 101 clock_counter_limit 13, no check, skip.
2021-05-05 14:44:34:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 40, chip_temp 46 ~ 50, now 62.5s, target 52.4
2021-05-05 14:44:34:frequency.c:657:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 108
2021-05-05 14:44:34:frequency.c:665:inc_freq_with_fixed_vco: set to 108M, get pcb 37 ~ 40, chip_temp 46 ~ 50
2021-05-05 14:44:34:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:44:34:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 108 clock_counter_limit 14, no check, skip.
2021-05-05 14:44:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 41, chip_temp 47 ~ 51, now 70.5s, target 53.8
2021-05-05 14:44:42:frequency.c:657:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 122
2021-05-05 14:44:42:frequency.c:665:inc_freq_with_fixed_vco: set to 122M, get pcb 37 ~ 41, chip_temp 47 ~ 51
2021-05-05 14:44:42:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:44:42:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 122 clock_counter_limit 16, no check, skip.
2021-05-05 14:44:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 42, chip_temp 48 ~ 52, now 78.5s, target 55.1
2021-05-05 14:44:50:frequency.c:657:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 127
2021-05-05 14:44:51:frequency.c:665:inc_freq_with_fixed_vco: set to 127M, get pcb 37 ~ 42, chip_temp 48 ~ 52
2021-05-05 14:44:51:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:44:51:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 127 clock_counter_limit 17, no check, skip.
2021-05-05 14:44:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 42, chip_temp 48 ~ 53, now 86.6s, target 56.4
2021-05-05 14:44:59:frequency.c:657:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 145
2021-05-05 14:44:59:frequency.c:665:inc_freq_with_fixed_vco: set to 145M, get pcb 37 ~ 42, chip_temp 48 ~ 53
2021-05-05 14:44:59:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:44:59:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 145 clock_counter_limit 20, no check, skip.
2021-05-05 14:45:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 43, chip_temp 50 ~ 54, now 94.6s, target 57.8
2021-05-05 14:45:07:frequency.c:657:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 152
2021-05-05 14:45:07:frequency.c:665:inc_freq_with_fixed_vco: set to 152M, get pcb 38 ~ 43, chip_temp 50 ~ 54
2021-05-05 14:45:07:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:45:07:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 152 clock_counter_limit 21, no check, skip.
2021-05-05 14:45:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 43, chip_temp 50 ~ 55, now 102.6s, target 59.1
2021-05-05 14:45:15:frequency.c:657:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 169
2021-05-05 14:45:15:frequency.c:665:inc_freq_with_fixed_vco: set to 169M, get pcb 38 ~ 43, chip_temp 50 ~ 55
2021-05-05 14:45:15:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:45:15:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 169 clock_counter_limit 24, no check, skip.
2021-05-05 14:45:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 44, chip_temp 51 ~ 56, now 110.6s, target 60.4
2021-05-05 14:45:23:frequency.c:657:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 203
2021-05-05 14:45:23:frequency.c:665:inc_freq_with_fixed_vco: set to 203M, get pcb 38 ~ 44, chip_temp 51 ~ 56
2021-05-05 14:45:23:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:45:23:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 203 clock_counter_limit 29, no check, skip.
2021-05-05 14:45:31:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 45, chip_temp 53 ~ 58, now 118.6s, target 61.8
2021-05-05 14:45:31:frequency.c:657:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 217
2021-05-05 14:45:31:frequency.c:665:inc_freq_with_fixed_vco: set to 217M, get pcb 39 ~ 45, chip_temp 53 ~ 58
2021-05-05 14:45:31:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:45:31:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 217 clock_counter_limit 31, no check, skip.
2021-05-05 14:45:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 46, chip_temp 55 ~ 59, now 126.6s, target 63.1
2021-05-05 14:45:39:frequency.c:657:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 254
2021-05-05 14:45:39:frequency.c:665:inc_freq_with_fixed_vco: set to 254M, get pcb 39 ~ 46, chip_temp 55 ~ 59
2021-05-05 14:45:39:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:45:39:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 254 clock_counter_limit 37, no check, skip.
2021-05-05 14:45:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 47, chip_temp 57 ~ 62, now 134.6s, target 64.4
2021-05-05 14:45:47:frequency.c:657:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 305
2021-05-05 14:45:47:frequency.c:665:inc_freq_with_fixed_vco: set to 305M, get pcb 40 ~ 47, chip_temp 57 ~ 62
2021-05-05 14:45:47:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:45:47:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 305 clock_counter_limit 45, no check, skip.
2021-05-05 14:45:49:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
chain 2 domain 0: d0 0.399, d1 0.393, d2 0.387, d3 0.393, sum = 1.573303
chain 2 domain 1: d0 0.398, d1 0.384, d2 0.388, d3 0.390, sum = 1.560181
chain 2 domain 2: d0 0.413, d1 0.409, d2 0.409, d3 0.410, sum = 1.640564
chain 2 domain 3: d0 0.407, d1 0.411, d2 0.390, d3 0.402, sum = 1.609802
chain 2 domain 4: d0 0.413, d1 0.413, d2 0.401, d3 0.409, sum = 1.635864
chain 2 domain 5: d0 0.408, d1 0.407, d2 0.389, d3 0.401, sum = 1.604248
chain 2 domain 6: d0 0.399, d1 0.391, d2 0.392, d3 0.394, sum = 1.576660
chain 2 domain 7: d0 0.422, d1 0.413, d2 0.419, d3 0.418, sum = 1.671692
chain 2 domain 8: d0 0.400, d1 0.399, d2 0.391, d3 0.397, sum = 1.587097
chain 2 domain 9: d0 0.405, d1 0.391, d2 0.393, d3 0.396, sum = 1.584778
chain 2 domain 10: d0 0.399, d1 0.392, d2 0.389, d3 0.393, sum = 1.573303
chain 2 domain 11: d0 0.396, d1 0.387, d2 0.385, d3 0.389, sum = 1.556519
chain 2 domain 12: d0 0.393, d1 0.386, d2 0.385, d3 0.388, sum = 1.550720
2021-05-05 14:45:50:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 3 with 0 regs timeout.
chain 3 domain 0: d0 0.412, d1 0.397, d2 0.416, d3 0.408, sum = 1.632935
chain 3 domain 1: d0 0.404, d1 0.387, d2 0.388, d3 0.393, sum = 1.571777
chain 3 domain 2: d0 0.407, d1 0.398, d2 0.401, d3 0.402, sum = 1.607483
chain 3 domain 3: d0 0.410, d1 0.406, d2 0.408, d3 0.408, sum = 1.631714
chain 3 domain 4: d0 0.400, d1 0.405, d2 0.397, d3 0.401, sum = 1.603088
chain 3 domain 5: d0 0.401, d1 0.392, d2 0.399, d3 0.397, sum = 1.588745
chain 3 domain 6: d0 0.395, d1 0.387, d2 0.388, d3 0.390, sum = 1.559875
chain 3 domain 7: d0 0.401, d1 0.386, d2 0.401, d3 0.396, sum = 1.584106
chain 3 domain 8: d0 0.410, d1 0.415, d2 0.410, d3 0.412, sum = 1.646545
chain 3 domain 9: d0 0.409, d1 0.393, d2 0.387, d3 0.396, sum = 1.585388
chain 3 domain 10: d0 0.400, d1 0.397, d2 0.397, d3 0.398, sum = 1.592224
chain 3 domain 11: d0 0.404, d1 0.399, d2 0.398, d3 0.400, sum = 1.601257
chain 3 domain 12: d0 0.388, d1 0.384, d2 0.382, d3 0.379, sum = 1.531799
2021-05-05 14:45:50:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-05-05 14:45:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 48, chip_temp 60 ~ 66, now 143.7s, target 66.0
2021-05-05 14:45:56:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 66.0 target_temp.
2021-05-05 14:46:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 49, chip_temp 61 ~ 67, now 149.7s, target 67.0
2021-05-05 14:46:02:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 67 > 67.0 target_temp.
2021-05-05 14:46:08:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 50, chip_temp 61 ~ 68, now 155.7s, target 68.0
2021-05-05 14:46:08:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 68 > 68.0 target_temp.
2021-05-05 14:46:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 51, chip_temp 62 ~ 68, now 161.7s, target 69.0
2021-05-05 14:46:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 51, chip_temp 62 ~ 69, now 162.7s, target 69.1
2021-05-05 14:46:16:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 51, chip_temp 62 ~ 69, now 163.7s, target 69.3
2021-05-05 14:46:17:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 51, chip_temp 62 ~ 69, now 164.7s, target 69.5
2021-05-05 14:46:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 52, chip_temp 62 ~ 69, now 165.7s, target 69.6
2021-05-05 14:46:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 52, chip_temp 62 ~ 69, now 166.7s, target 69.8
2021-05-05 14:46:20:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 52, chip_temp 62 ~ 70, now 167.7s, target 70.0
2021-05-05 14:46:20:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 70 > 70.0 target_temp.
2021-05-05 14:46:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 53, chip_temp 62 ~ 70, now 173.7s, target 71.0
2021-05-05 14:46:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 53, chip_temp 62 ~ 70, now 174.8s, target 71.1
2021-05-05 14:46:28:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 53, chip_temp 62 ~ 71, now 175.8s, target 71.3
2021-05-05 14:46:29:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 53, chip_temp 62 ~ 71, now 176.8s, target 71.5
2021-05-05 14:46:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 53, chip_temp 62 ~ 71, now 177.8s, target 71.6
2021-05-05 14:46:31:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 53, chip_temp 62 ~ 71, now 178.8s, target 71.8
2021-05-05 14:46:32:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 53, chip_temp 62 ~ 71, now 179.8s, target 72.0
2021-05-05 14:46:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 53, chip_temp 62 ~ 71, now 180.8s, target 72.1
2021-05-05 14:46:34:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 54, chip_temp 62 ~ 71, now 181.8s, target 72.3
2021-05-05 14:46:35:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 54, chip_temp 62 ~ 71, now 182.8s, target 72.5
2021-05-05 14:46:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 54, chip_temp 62 ~ 72, now 183.8s, target 72.6
2021-05-05 14:46:37:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 54, chip_temp 62 ~ 72, now 184.8s, target 72.8
2021-05-05 14:46:38:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 54, chip_temp 62 ~ 72, now 185.8s, target 73.0
2021-05-05 14:46:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 54, chip_temp 62 ~ 72, now 186.8s, target 73.1
2021-05-05 14:46:40:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 54, chip_temp 62 ~ 72, now 187.8s, target 73.3
2021-05-05 14:46:41:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 54, chip_temp 62 ~ 72, now 188.8s, target 73.5
2021-05-05 14:46:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 54, chip_temp 62 ~ 72, now 189.8s, target 73.6
2021-05-05 14:46:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 54, chip_temp 62 ~ 72, now 190.8s, target 73.8
2021-05-05 14:46:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 54, chip_temp 62 ~ 72, now 191.8s, target 74.0
2021-05-05 14:46:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 54, chip_temp 62 ~ 73, now 192.8s, target 74.1
2021-05-05 14:46:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 54, chip_temp 62 ~ 73, now 193.8s, target 74.3
2021-05-05 14:46:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 55, chip_temp 62 ~ 73, now 194.8s, target 74.5
2021-05-05 14:46:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 55, chip_temp 62 ~ 73, now 195.8s, target 74.6
2021-05-05 14:46:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 55, chip_temp 62 ~ 73, now 196.8s, target 74.8
2021-05-05 14:46:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 55, chip_temp 62 ~ 73, now 197.8s, target 75.0
2021-05-05 14:46:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 55, chip_temp 62 ~ 73, now 198.8s, target 75.1
2021-05-05 14:46:51:frequency.c:657:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 435
2021-05-05 14:46:51:frequency.c:665:inc_freq_with_fixed_vco: set to 435M, get pcb 42 ~ 55, chip_temp 62 ~ 73
2021-05-05 14:46:51:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2020, step by step.
2021-05-05 14:47:00:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
chain 2 domain 0: d0 0.381, d1 0.373, d2 0.371, d3 0.365, sum = 1.489441
chain 2 domain 1: d0 0.378, d1 0.370, d2 0.370, d3 0.371, sum = 1.489319
chain 2 domain 2: d0 0.401, d1 0.398, d2 0.397, d3 0.398, sum = 1.593689
chain 2 domain 3: d0 0.400, d1 0.397, d2 0.375, d3 0.390, sum = 1.561768
chain 2 domain 4: d0 0.406, d1 0.396, d2 0.395, d3 0.399, sum = 1.596130
chain 2 domain 5: d0 0.393, d1 0.381, d2 0.383, d3 0.386, sum = 1.542908
chain 2 domain 6: d0 0.385, d1 0.377, d2 0.378, d3 0.357, sum = 1.496155
chain 2 domain 7: d0 0.411, d1 0.406, d2 0.396, d3 0.404, sum = 1.616333
chain 2 domain 8: d0 0.386, d1 0.380, d2 0.380, d3 0.358, sum = 1.503662
chain 2 domain 9: d0 0.394, d1 0.382, d2 0.379, d3 0.379, sum = 1.534241
chain 2 domain 10: d0 0.382, d1 0.374, d2 0.374, d3 0.361, sum = 1.492371
chain 2 domain 11: d0 0.380, d1 0.370, d2 0.368, d3 0.371, sum = 1.488281
chain 2 domain 12: d0 0.378, d1 0.371, d2 0.369, d3 0.371, sum = 1.489014
2021-05-05 14:47:01:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 3 with 0 regs timeout.
chain 3 domain 0: d0 0.392, d1 0.386, d2 0.388, d3 0.389, sum = 1.555054
chain 3 domain 1: d0 0.386, d1 0.374, d2 0.372, d3 0.363, sum = 1.495728
chain 3 domain 2: d0 0.393, d1 0.383, d2 0.383, d3 0.386, sum = 1.544189
chain 3 domain 3: d0 0.397, d1 0.381, d2 0.383, d3 0.380, sum = 1.540710
chain 3 domain 4: d0 0.382, d1 0.383, d2 0.385, d3 0.383, sum = 1.533081
chain 3 domain 5: d0 0.385, d1 0.378, d2 0.378, d3 0.355, sum = 1.496521
chain 3 domain 6: d0 0.381, d1 0.373, d2 0.374, d3 0.364, sum = 1.491150
chain 3 domain 7: d0 0.381, d1 0.376, d2 0.389, d3 0.382, sum = 1.528625
chain 3 domain 8: d0 0.398, d1 0.394, d2 0.398, d3 0.396, sum = 1.586243
chain 3 domain 9: d0 0.391, d1 0.388, d2 0.387, d3 0.389, sum = 1.554626
chain 3 domain 10: d0 0.385, d1 0.383, d2 0.381, d3 0.362, sum = 1.510254
chain 3 domain 11: d0 0.388, d1 0.382, d2 0.383, d3 0.353, sum = 1.505188
chain 3 domain 12: d0 0.373, d1 0.368, d2 0.367, d3 0.369, sum = 1.476562
2021-05-05 14:47:01:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-05-05 14:47:01:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:47:01:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 435 clock_counter_limit 66, no check, skip.
2021-05-05 14:47:03:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
chain 2 domain 0: d0 0.382, d1 0.374, d2 0.372, d3 0.364, sum = 1.491577
chain 2 domain 1: d0 0.380, d1 0.373, d2 0.372, d3 0.365, sum = 1.490601
chain 2 domain 2: d0 0.397, d1 0.393, d2 0.391, d3 0.393, sum = 1.574219
chain 2 domain 3: d0 0.393, d1 0.387, d2 0.389, d3 0.390, sum = 1.559082
chain 2 domain 4: d0 0.401, d1 0.394, d2 0.394, d3 0.396, sum = 1.584900
chain 2 domain 5: d0 0.391, d1 0.382, d2 0.382, d3 0.379, sum = 1.534119
chain 2 domain 6: d0 0.384, d1 0.378, d2 0.377, d3 0.358, sum = 1.496582
chain 2 domain 7: d0 0.406, d1 0.397, d2 0.397, d3 0.400, sum = 1.600342
chain 2 domain 8: d0 0.386, d1 0.380, d2 0.380, d3 0.368, sum = 1.514221
chain 2 domain 9: d0 0.388, d1 0.376, d2 0.377, d3 0.369, sum = 1.510620
chain 2 domain 10: d0 0.383, d1 0.375, d2 0.375, d3 0.362, sum = 1.493652
chain 2 domain 11: d0 0.382, d1 0.372, d2 0.372, d3 0.366, sum = 1.491455
chain 2 domain 12: d0 0.377, d1 0.370, d2 0.369, d3 0.371, sum = 1.488220
2021-05-05 14:47:04:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 3 with 0 regs timeout.
chain 3 domain 0: d0 0.391, d1 0.384, d2 0.384, d3 0.386, sum = 1.544739
chain 3 domain 1: d0 0.383, d1 0.377, d2 0.386, d3 0.382, sum = 1.526978
chain 3 domain 2: d0 0.386, d1 0.379, d2 0.382, d3 0.351, sum = 1.497253
chain 3 domain 3: d0 0.391, d1 0.395, d2 0.366, d3 0.346, sum = 1.497864
chain 3 domain 4: d0 0.384, d1 0.377, d2 0.407, d3 0.389, sum = 1.556885
chain 3 domain 5: d0 0.385, d1 0.380, d2 0.380, d3 0.353, sum = 1.497498
chain 3 domain 6: d0 0.381, d1 0.376, d2 0.375, d3 0.360, sum = 1.492737
chain 3 domain 7: d0 0.382, d1 0.377, d2 0.374, d3 0.361, sum = 1.492920
chain 3 domain 8: d0 0.397, d1 0.392, d2 0.392, d3 0.393, sum = 1.573914
chain 3 domain 9: d0 0.392, d1 0.379, d2 0.393, d3 0.353, sum = 1.517578
chain 3 domain 10: d0 0.384, d1 0.380, d2 0.381, d3 0.351, sum = 1.497131
chain 3 domain 11: d0 0.387, d1 0.381, d2 0.384, d3 0.360, sum = 1.511353
chain 3 domain 12: d0 0.370, d1 0.365, d2 0.363, d3 0.366, sum = 1.463196
2021-05-05 14:47:04:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-05-05 14:47:10:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 56, chip_temp 67 ~ 76, now 218.4s, target 78.4
2021-05-05 14:47:10:frequency.c:657:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 6, _POSTDIV2 = 1, USER_DIV = 1, freq = 508
2021-05-05 14:47:10:frequency.c:665:inc_freq_with_fixed_vco: set to 508M, get pcb 42 ~ 56, chip_temp 67 ~ 76
2021-05-05 14:47:10:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1920, step by step.
2021-05-05 14:47:22:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
chain 2 domain 0: d0 0.362, d1 0.355, d2 0.353, d3 0.353, sum = 1.422974
chain 2 domain 1: d0 0.361, d1 0.353, d2 0.355, d3 0.354, sum = 1.422241
chain 2 domain 2: d0 0.379, d1 0.376, d2 0.375, d3 0.363, sum = 1.492188
chain 2 domain 3: d0 0.375, d1 0.370, d2 0.371, d3 0.372, sum = 1.488281
chain 2 domain 4: d0 0.382, d1 0.375, d2 0.376, d3 0.359, sum = 1.492920
chain 2 domain 5: d0 0.373, d1 0.363, d2 0.364, d3 0.367, sum = 1.467529
chain 2 domain 6: d0 0.365, d1 0.359, d2 0.360, d3 0.362, sum = 1.446045
chain 2 domain 7: d0 0.388, d1 0.379, d2 0.379, d3 0.351, sum = 1.497131
chain 2 domain 8: d0 0.367, d1 0.362, d2 0.362, d3 0.365, sum = 1.454834
chain 2 domain 9: d0 0.371, d1 0.356, d2 0.355, d3 0.362, sum = 1.442627
chain 2 domain 10: d0 0.363, d1 0.356, d2 0.355, d3 0.355, sum = 1.429443
chain 2 domain 11: d0 0.363, d1 0.352, d2 0.353, d3 0.354, sum = 1.422668
chain 2 domain 12: d0 0.359, d1 0.352, d2 0.351, d3 0.355, sum = 1.417297
2021-05-05 14:47:22:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 3 with 0 regs timeout.
chain 3 domain 0: d0 0.374, d1 0.367, d2 0.371, d3 0.366, sum = 1.477478
chain 3 domain 1: d0 0.364, d1 0.359, d2 0.357, d3 0.360, sum = 1.439941
chain 3 domain 2: d0 0.367, d1 0.375, d2 0.362, d3 0.382, sum = 1.485718
chain 3 domain 3: d0 0.370, d1 0.363, d2 0.366, d3 0.358, sum = 1.456665
chain 3 domain 4: d0 0.370, d1 0.357, d2 0.361, d3 0.361, sum = 1.449280
chain 3 domain 5: d0 0.366, d1 0.360, d2 0.361, d3 0.360, sum = 1.447266
chain 3 domain 6: d0 0.362, d1 0.357, d2 0.357, d3 0.356, sum = 1.431885
chain 3 domain 7: d0 0.369, d1 0.358, d2 0.354, d3 0.354, sum = 1.434998
chain 3 domain 8: d0 0.378, d1 0.374, d2 0.373, d3 0.365, sum = 1.490479
chain 3 domain 9: d0 0.369, d1 0.374, d2 0.346, d3 0.361, sum = 1.450928
chain 3 domain 10: d0 0.365, d1 0.362, d2 0.362, d3 0.363, sum = 1.452881
chain 3 domain 11: d0 0.367, d1 0.363, d2 0.365, d3 0.363, sum = 1.458191
chain 3 domain 12: d0 0.352, d1 0.348, d2 0.346, d3 0.348, sum = 1.394470
2021-05-05 14:47:22:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-05-05 14:47:22:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:47:22:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 508 clock_counter_limit 78, no check, skip.
2021-05-05 14:47:25:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
chain 2 domain 0: d0 0.362, d1 0.355, d2 0.354, d3 0.353, sum = 1.423645
chain 2 domain 1: d0 0.361, d1 0.353, d2 0.353, d3 0.356, sum = 1.423584
chain 2 domain 2: d0 0.377, d1 0.374, d2 0.372, d3 0.368, sum = 1.491028
chain 2 domain 3: d0 0.375, d1 0.368, d2 0.370, d3 0.375, sum = 1.486755
chain 2 domain 4: d0 0.381, d1 0.375, d2 0.374, d3 0.362, sum = 1.491455
chain 2 domain 5: d0 0.372, d1 0.363, d2 0.363, d3 0.366, sum = 1.464294
chain 2 domain 6: d0 0.366, d1 0.359, d2 0.359, d3 0.363, sum = 1.446594
chain 2 domain 7: d0 0.386, d1 0.378, d2 0.376, d3 0.356, sum = 1.496216
chain 2 domain 8: d0 0.367, d1 0.362, d2 0.362, d3 0.365, sum = 1.455811
chain 2 domain 9: d0 0.370, d1 0.357, d2 0.352, d3 0.371, sum = 1.450562
chain 2 domain 10: d0 0.364, d1 0.357, d2 0.355, d3 0.356, sum = 1.431458
chain 2 domain 11: d0 0.363, d1 0.354, d2 0.354, d3 0.355, sum = 1.425293
chain 2 domain 12: d0 0.358, d1 0.352, d2 0.351, d3 0.355, sum = 1.416016
2021-05-05 14:47:25:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 3 with 0 regs timeout.
chain 3 domain 0: d0 0.373, d1 0.368, d2 0.368, d3 0.370, sum = 1.478516
chain 3 domain 1: d0 0.365, d1 0.358, d2 0.370, d3 0.371, sum = 1.464050
chain 3 domain 2: d0 0.373, d1 0.363, d2 0.354, d3 0.363, sum = 1.452332
chain 3 domain 3: d0 0.370, d1 0.375, d2 0.374, d3 0.350, sum = 1.468994
chain 3 domain 4: d0 0.365, d1 0.365, d2 0.358, d3 0.368, sum = 1.454834
chain 3 domain 5: d0 0.366, d1 0.360, d2 0.362, d3 0.360, sum = 1.447571
chain 3 domain 6: d0 0.363, d1 0.357, d2 0.356, d3 0.359, sum = 1.435181
chain 3 domain 7: d0 0.364, d1 0.358, d2 0.361, d3 0.357, sum = 1.439392
chain 3 domain 8: d0 0.377, d1 0.373, d2 0.375, d3 0.365, sum = 1.489319
chain 3 domain 9: d0 0.368, d1 0.361, d2 0.363, d3 0.358, sum = 1.449097
chain 3 domain 10: d0 0.365, d1 0.362, d2 0.362, d3 0.362, sum = 1.450012
chain 3 domain 11: d0 0.368, d1 0.364, d2 0.362, d3 0.366, sum = 1.459534
chain 3 domain 12: d0 0.351, d1 0.346, d2 0.345, d3 0.346, sum = 1.387817
2021-05-05 14:47:25:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-05-05 14:47:31:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 58, chip_temp 69 ~ 80, now 239.5s, target 81.9
2021-05-05 14:47:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 58, chip_temp 69 ~ 80, now 240.5s, target 82.1
2021-05-05 14:47:33:frequency.c:657:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 5, _POSTDIV2 = 1, USER_DIV = 1, freq = 610
2021-05-05 14:47:33:frequency.c:665:inc_freq_with_fixed_vco: set to 610M, get pcb 43 ~ 58, chip_temp 69 ~ 80
2021-05-05 14:47:33:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1860, step by step.
2021-05-05 14:47:42:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
chain 2 domain 0: d0 0.351, d1 0.344, d2 0.340, d3 0.342, sum = 1.376465
chain 2 domain 1: d0 0.350, d1 0.342, d2 0.342, d3 0.343, sum = 1.377075
chain 2 domain 2: d0 0.367, d1 0.364, d2 0.362, d3 0.363, sum = 1.455566
chain 2 domain 3: d0 0.364, d1 0.358, d2 0.358, d3 0.365, sum = 1.444641
chain 2 domain 4: d0 0.370, d1 0.364, d2 0.364, d3 0.364, sum = 1.462036
chain 2 domain 5: d0 0.361, d1 0.351, d2 0.352, d3 0.356, sum = 1.420654
chain 2 domain 6: d0 0.354, d1 0.349, d2 0.348, d3 0.351, sum = 1.402527
chain 2 domain 7: d0 0.375, d1 0.367, d2 0.366, d3 0.367, sum = 1.475403
chain 2 domain 8: d0 0.356, d1 0.351, d2 0.351, d3 0.352, sum = 1.409485
chain 2 domain 9: d0 0.361, d1 0.345, d2 0.343, d3 0.345, sum = 1.394836
chain 2 domain 10: d0 0.352, d1 0.346, d2 0.344, d3 0.344, sum = 1.385254
chain 2 domain 11: d0 0.352, d1 0.342, d2 0.341, d3 0.345, sum = 1.379150
chain 2 domain 12: d0 0.348, d1 0.342, d2 0.339, d3 0.344, sum = 1.373047
2021-05-05 14:47:42:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 3 with 0 regs timeout.
chain 3 domain 0: d0 0.362, d1 0.357, d2 0.357, d3 0.359, sum = 1.434387
chain 3 domain 1: d0 0.358, d1 0.346, d2 0.362, d3 0.337, sum = 1.402527
chain 3 domain 2: d0 0.354, d1 0.350, d2 0.353, d3 0.371, sum = 1.427856
chain 3 domain 3: d0 0.362, d1 0.351, d2 0.355, d3 0.349, sum = 1.416504
chain 3 domain 4: d0 0.355, d1 0.351, d2 0.348, d3 0.355, sum = 1.409363
chain 3 domain 5: d0 0.354, d1 0.349, d2 0.348, d3 0.351, sum = 1.402832
chain 3 domain 6: d0 0.351, d1 0.346, d2 0.345, d3 0.345, sum = 1.387756
chain 3 domain 7: d0 0.353, d1 0.351, d2 0.347, d3 0.349, sum = 1.399719
chain 3 domain 8: d0 0.365, d1 0.363, d2 0.361, d3 0.361, sum = 1.450623
chain 3 domain 9: d0 0.359, d1 0.349, d2 0.352, d3 0.347, sum = 1.406311
chain 3 domain 10: d0 0.354, d1 0.351, d2 0.349, d3 0.353, sum = 1.407654
chain 3 domain 11: d0 0.357, d1 0.351, d2 0.353, d3 0.353, sum = 1.413635
chain 3 domain 12: d0 0.340, d1 0.336, d2 0.333, d3 0.336, sum = 1.346069
2021-05-05 14:47:42:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-05-05 14:47:42:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-05-05 14:47:42:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 610 clock_counter_limit 94, no check, skip.
2021-05-05 14:47:45:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
chain 2 domain 0: d0 0.350, d1 0.344, d2 0.341, d3 0.343, sum = 1.377930
chain 2 domain 1: d0 0.350, d1 0.342, d2 0.343, d3 0.344, sum = 1.379333
chain 2 domain 2: d0 0.365, d1 0.361, d2 0.360, d3 0.363, sum = 1.448975
chain 2 domain 3: d0 0.363, d1 0.356, d2 0.358, d3 0.362, sum = 1.439453
chain 2 domain 4: d0 0.368, d1 0.362, d2 0.361, d3 0.364, sum = 1.455811
chain 2 domain 5: d0 0.360, d1 0.352, d2 0.352, d3 0.354, sum = 1.418640
chain 2 domain 6: d0 0.354, d1 0.348, d2 0.348, d3 0.351, sum = 1.401917
chain 2 domain 7: d0 0.374, d1 0.365, d2 0.365, d3 0.364, sum = 1.467773
chain 2 domain 8: d0 0.356, d1 0.351, d2 0.350, d3 0.352, sum = 1.409668
chain 2 domain 9: d0 0.358, d1 0.347, d2 0.349, d3 0.347, sum = 1.401123
chain 2 domain 10: d0 0.352, d1 0.346, d2 0.344, d3 0.344, sum = 1.386475
chain 2 domain 11: d0 0.352, d1 0.344, d2 0.342, d3 0.345, sum = 1.383362
chain 2 domain 12: d0 0.347, d1 0.341, d2 0.340, d3 0.344, sum = 1.371582
2021-05-05 14:47:45:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 3 with 0 regs timeout.
chain 3 domain 0: d0 0.361, d1 0.357, d2 0.357, d3 0.355, sum = 1.430420
chain 3 domain 1: d0 0.354, d1 0.349, d2 0.349, d3 0.348, sum = 1.401123
chain 3 domain 2: d0 0.358, d1 0.353, d2 0.370, d3 0.343, sum = 1.423523
chain 3 domain 3: d0 0.358, d1 0.356, d2 0.351, d3 0.355, sum = 1.419434
chain 3 domain 4: d0 0.355, d1 0.350, d2 0.351, d3 0.352, sum = 1.408447
chain 3 domain 5: d0 0.355, d1 0.350, d2 0.349, d3 0.351, sum = 1.404236
chain 3 domain 6: d0 0.352, d1 0.346, d2 0.347, d3 0.346, sum = 1.390442
chain 3 domain 7: d0 0.354, d1 0.349, d2 0.348, d3 0.346, sum = 1.397522
chain 3 domain 8: d0 0.365, d1 0.361, d2 0.362, d3 0.361, sum = 1.448547
chain 3 domain 9: d0 0.357, d1 0.353, d2 0.353, d3 0.346, sum = 1.409485
chain 3 domain 10: d0 0.353, d1 0.351, d2 0.350, d3 0.352, sum = 1.405884
chain 3 domain 11: d0 0.357, d1 0.352, d2 0.352, d3 0.351, sum = 1.412231
chain 3 domain 12: d0 0.339, d1 0.334, d2 0.332, d3 0.335, sum = 1.339050
2021-05-05 14:47:46:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-05-05 14:47:46:frequency.c:717:inc_freq_with_fixed_step: chain = 2, freq_start = 610, freq_end = 620, freq_step = 5, is_higher_voltage = true
2021-05-05 14:47:46:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 615 clock_counter_limit 95, no check, skip.
2021-05-05 14:47:48:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 620 clock_counter_limit 96, no check, skip.
2021-05-05 14:47:50:driver-btm-api.c:666:set_timeout: freq = 620, percent = 90, hcn = 707788, timeout = 1140
2021-05-05 14:47:50:power_api.c:353:set_to_working_voltage_by_steps: Set to voltage raw 1840, step by step.
2021-05-05 14:47:57:thread.c:1533:create_check_system_status_thread: create thread
2021-05-05 14:47:57:thread.c:1508:create_asic_status_monitor_thread: create thread
2021-05-05 14:47:57:driver-btm-api.c:2599:bitmain_soc_init: Init done!
2021-05-05 14:48:02:driver-btm-api.c:247:set_miner_status: STATUS_OKAY
2021-05-05 14:48:03:frequency.c:107:get_ideal_hash_rate_GH: ideal_hash_rate = 36656
2021-05-05 14:48:03:frequency.c:128:get_sale_hash_rate_GH: sale_hash_rate = 36000
2021-05-05 14:48:07:driver-btm-api.c:1634:dhash_chip_send_job: Version num 8
2021-05-05 14:48:07:driver-btm-api.c:1778:dhash_chip_send_job: stime.tv_sec 1620226087, block_ntime 1620226054 -
I had a very hard time finding it too. Yes I can email to you later on. Ill be home about 5pm eastern. Ill reply to you when I have a chance. I away going crazy trying to figure out what was going on with my miner. It was like chasing a ghost in the damn thing. This was the issue the whole time. I tried new PSU, changing cables, swapping hash boards and cpu. Please let me know if you end up finding it.
-
Me too my friend , i went the psu in technician it was ok , i bought new control board, swap hashboards. I did not change wires. I found a firmware from 2019 for t17 not t17e. I think is not the same. My email is mitsosvre7@gmail.com . In how many hours will you send me? I dont know your location ? Thanks again.
-
Finally i get the t17e 2019 firmware but things are not better. Kernel log does not show the check at all. Procedure is not starting.
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203648K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25728K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12688K (cce9c000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 262/183, WL threshold: 4096, image sequence number: 262741923
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 709
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 712
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 5017/3340, WL threshold: 4096, image sequence number: 3563076859
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 721
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 724
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2021-05-07 18:12:39:driver-btm-api.c:542:init_freq_mode: This is fix-freq version
2021-05-07 18:12:39:driver-btm-api.c:1850:bitmain_soc_init: Miner compile time: Thu Nov 21 14:00:27 CST 2019 type: Antminer T17e
2021-05-07 18:12:39:driver-btm-api.c:1851:bitmain_soc_init: commit version: fe37dcc 2019-11-20 19:23:24, build by: parallels 2019-11-21 14:00:18
2021-05-07 18:12:39:driver-btm-api.c:1852:bitmain_soc_init: opt_multi_version = 1
2021-05-07 18:12:39:driver-btm-api.c:1853:bitmain_soc_init: opt_bitmain_ab = 1
2021-05-07 18:12:39:driver-btm-api.c:1854:bitmain_soc_init: mid_auto_gen = 0
2021-05-07 18:12:39:driver-btm-api.c:1855:bitmain_soc_init: opt_bitmain_work_mode = 2
2021-05-07 18:12:39:driver-btm-api.c:1669:show_sn: no SN got, please write SN to /nvdata/sn
2021-05-07 18:12:39:fan.c:248:front_fan_power_on: Note: front fan is power on!
2021-05-07 18:12:39:fan.c:260:rear_fan_power_on: Note: rear fan is power on!
2021-05-07 18:12:39:driver-btm-api.c:1006:miner_device_init: Detect 256MB control board of XILINX
2021-05-07 18:12:39:driver-btm-api.c:947:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2021-05-07 18:12:45:driver-btm-api.c:931:init_miner_version: miner ID : 800c9d0c2b104814
2021-05-07 18:12:45:driver-btm-api.c:937:init_miner_version: FPGA Version = 0xB023
2021-05-07 18:12:46 [chain 1]
0x0000 96 13 01 00 59 44 46 54 59 48 39 41 49 41 41 42
0x0010 42 31 44 39 43 00 00 00 0A 01 00 01 01 01 02 04
0x0020 02 41 42 5A 5A 5A 63 2E 96 13 7C 7C 7C 7C 7C 7C
0x0030 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C
0x0040 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C
0x0050 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C
0x0060 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C
0x0070 7C 7C 7C 7C 7C 7C 7C 7C 30 07 34 48 00 00 00 00
0x0080 01 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 77 C02021-05-07 18:12:47 fixture_header : 0x1396
2021-05-07 18:12:47 fixture_version : 0x0001
2021-05-07 18:12:47 hash_board_sn : YDFTYH9AIAABB1D9C
2021-05-07 18:12:47 pcb_version : 0x010a
2021-05-07 18:12:47 bom_version : 0x0100
2021-05-07 18:12:47 product_id : 0x01
2021-05-07 18:12:47 board_bin : 0x01
2021-05-07 18:12:47 chip_ft : A4V2
2021-05-07 18:12:47 chip_bin : BIN2
2021-05-07 18:12:47 chip_version : AB
2021-05-07 18:12:47
2021-05-07 18:12:47 miner_header : 0x1396
2021-05-07 18:12:47 work_mode_count : 0x01
2021-05-07 18:12:47 miner_bin : 0x00
2021-05-07 18:12:47 [mode 0]
2021-05-07 18:12:47 voltage : 1840
2021-05-07 18:12:47 ideal_hash_rate : 18484
IC[000]:620 IC[001]:620 IC[002]:620 IC[003]:620 IC[004]:620 IC[005]:620
IC[006]:620 IC[007]:620 IC[008]:620 IC[009]:620 IC[010]:620 IC[011]:620
IC[012]:620 IC[013]:620 IC[014]:620 IC[015]:620 IC[016]:620 IC[017]:620
IC[018]:620 IC[019]:620 IC[020]:620 IC[021]:620 IC[022]:620 IC[023]:620
IC[024]:620 IC[025]:620 IC[026]:620 IC[027]:620 IC[028]:620 IC[029]:620
IC[030]:620 IC[031]:620 IC[032]:620 IC[033]:620 IC[034]:620 IC[035]:620
IC[036]:620 IC[037]:620 IC[038]:620 IC[039]:620 IC[040]:620 IC[041]:620
IC[042]:620 IC[043]:620 IC[044]:620 IC[045]:620 IC[046]:620 IC[047]:620
IC[048]:620 IC[049]:620 IC[050]:620 IC[051]:620 IC[052]:620 IC[053]:620
IC[054]:620 IC[055]:620 IC[056]:620 IC[057]:620 IC[058]:620 IC[059]:620
IC[060]:620 IC[061]:620 IC[062]:620 IC[063]:620 IC[064]:620 IC[065]:620
IC[066]:620 IC[067]:620 IC[068]:620 IC[069]:620 IC[070]:620 IC[071]:620
IC[072]:620 IC[073]:620 IC[074]:620 IC[075]:620 IC[076]:620 IC[077]:620
2021-05-07 18:12:49 [chain 2]
0x0000 96 13 01 00 48 51 44 5A 59 48 39 41 49 41 42 4A
0x0010 46 30 50 48 4B 00 00 00 0A 01 00 01 01 01 03 04
0x0020 04 41 42 5A 5A 5A 59 D8 96 13 7A 7A 7A 7A 7A 7A
0x0030 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A
0x0040 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A
0x0050 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A
0x0060 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A 7A
0x0070 7A 7A 7A 7A 7A 7A 7A 7A 30 07 FC 46 00 00 00 00
0x0080 01 00 00 00 00 FF FF FF FF FF FF FF FF FF FF FF
0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF B8 8B2021-05-07 18:12:49 fixture_header : 0x1396
2021-05-07 18:12:49 fixture_version : 0x0001
2021-05-07 18:12:49 hash_board_sn : HQDZYH9AIABJF0PHK
2021-05-07 18:12:49 pcb_version : 0x010a
2021-05-07 18:12:49 bom_version : 0x0100
2021-05-07 18:12:49 product_id : 0x01
2021-05-07 18:12:49 board_bin : 0x01
2021-05-07 18:12:49 chip_ft : A4V4
2021-05-07 18:12:49 chip_bin : BIN3
2021-05-07 18:12:49 chip_version : AB
2021-05-07 18:12:49
2021-05-07 18:12:49 miner_header : 0x1396
2021-05-07 18:12:49 work_mode_count : 0x01
2021-05-07 18:12:49 miner_bin : 0x00
2021-05-07 18:12:49 [mode 0]
2021-05-07 18:12:49 voltage : 1840
2021-05-07 18:12:49 ideal_hash_rate : 18172
IC[000]:610 IC[001]:610 IC[002]:610 IC[003]:610 IC[004]:610 IC[005]:610
IC[006]:610 IC[007]:610 IC[008]:610 IC[009]:610 IC[010]:610 IC[011]:610
IC[012]:610 IC[013]:610 IC[014]:610 IC[015]:610 IC[016]:610 IC[017]:610
IC[018]:610 IC[019]:610 IC[020]:610 IC[021]:610 IC[022]:610 IC[023]:610
IC[024]:610 IC[025]:610 IC[026]:610 IC[027]:610 IC[028]:610 IC[029]:610
IC[030]:610 IC[031]:610 IC[032]:610 IC[033]:610 IC[034]:610 IC[035]:610
IC[036]:610 IC[037]:610 IC[038]:610 IC[039]:610 IC[040]:610 IC[041]:610
IC[042]:610 IC[043]:610 IC[044]:610 IC[045]:610 IC[046]:610 IC[047]:610
IC[048]:610 IC[049]:610 IC[050]:610 IC[051]:610 IC[052]:610 IC[053]:610
IC[054]:610 IC[055]:610 IC[056]:610 IC[057]:610 IC[058]:610 IC[059]:610
IC[060]:610 IC[061]:610 IC[062]:610 IC[063]:610 IC[064]:610 IC[065]:610
IC[066]:610 IC[067]:610 IC[068]:610 IC[069]:610 IC[070]:610 IC[071]:610
IC[072]:610 IC[073]:610 IC[074]:610 IC[075]:610 IC[076]:610 IC[077]:610
2021-05-07 18:12:49:thread.c:719:create_read_nonce_reg_thread: create thread
2021-05-07 18:12:49:eeprom.c:867:display_board_info: chain[1] board bin: 1, chip bin: 2, chip ft: A4V2, chip version: AB
2021-05-07 18:12:49:eeprom.c:867:display_board_info: chain[2] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
2021-05-07 18:12:49:driver-btm-api.c:1772:bitmain_board_init: board adapt failed, exit
2021-05-07 18:12:49:driver-btm-api.c:191:set_miner_status: ERROR_SOC_INIT
2021-05-07 18:12:49:driver-btm-api.c:132:stop_mining: stop mining: soc init failed!
2021-05-07 18:12:49:thread.c:764:cancel_read_nonce_reg_thread: cancel thread
2021-05-07 18:12:49:driver-btm-api.c:117:killall_hashboard: ****power off hashboard**** -
Eric , hello again. Please upload your firmware in my email mitsosvre7@gmail.com to be sure that i have the correct. I saw somewhere that there are 2 firmwares of 2019. Thank you!
-
Dear
For the SOC issue ,please kindly try to exclude the troubleshooting by the below instructions firstly
1 Check the power line,plug it and unplug it to test
2 restore to the factory settings,
3 manually configure the miner configuration
4 flash the sd card file to recover to the control board
请先登录再写评论。
评论
19 条评论