8 条评论

  • 正式评论

    Hello, if you've tried all solutions but the problem still exists, we can only suggest to send it back to repair site for further check and maintenance.

    评论操作 固定链接

    Check if the fan cable is normal

    评论操作 固定链接

    i have the same problem, how can i fix it ?HELP


    评论操作 固定链接

    hi bro.. were you able to solve your problem? if yes.. then how?

    i am also getting "addrInterval or corenum is not initialized."

    评论操作 固定链接

    Dear friends

    I have same problem. My S19pro work just a minute then will power of
    I reset several times
    Reset factory several times
    Recover control board several times
    Changed control board
    Change power

    Anybody can help?

    2021-09-28 13:49:27 STATUS_OKAY
    2021-09-28 13:49:27 start the cached job
    2021-09-28 13:49:27 Version num 8
    2021-09-28 13:49:27 Mask num 0xe000
    2021-09-28 13:49:27 freq = 525, percent = 90, hcn = 12480, timeout = 449
    2021-09-28 13:49:27 set_start_time_point total_tv_start_sys=111 total_tv_end_sys=112
    2021-09-28 13:49:27 set_voltage_by_steps to 1335.
    2021-09-28 13:49:43 over max temp, pcb temp 0 (max 80), chip temp 15(max 95) pcb temp rise 0 chip temp rise 0, total_exit_failure 0
    2021-09-28 13:49:43 ERROR_TEMP_TOO_HIGH: over max temp
    2021-09-28 13:49:43 stop_mining: over max temp
    2021-09-28 13:49:43 uninit_temp_info
    2021-09-28 13:49:43 do not read temp anymore...
    2021-09-28 13:49:43 cancel thread
    2021-09-28 13:49:43 cancel thread
    2021-09-28 13:49:43 cancel thread
    2021-09-28 13:49:43 ****power off hashboard****
    2021-09-28 13:49:45 temp monitor thread exit

    评论操作 固定链接

    these seems to be a common problem that i am having as well.  Let me know if you find a solution!  

    评论操作 固定链接

    Is this a problem specific to the s19 units?  need to know if i should order a different model going forward. 

    评论操作 固定链接

    I had the same problem with my new S19J Pro.
    The Problem has been since the beginning.
    restart, SD flash, upgrade, PIC chip new program, nothing helped.
    I found the problem myself after 3 weeks.
    If you need help with this problem, you can write to me

    评论操作 固定链接