T19 temperature cant get stabilized

已回答

关注

Anatolii

• 2021年06月19日 16:59

When temperature goals 84-85C fans working on a speed over 6000

then temperature gets 71-72C fans working on a speed 3000, so temperature moves to 84-85C

and it goes on a circle.

usually temperature was 74-75 and fun speed 4800 +/-

I restarted asic a few times, restored factory settings, clean from dust, but it does not help.

0

• 正式评论

  

  Nick

  • 2021年06月21日 05:04

  Dear Anatolii

  Could you send us full kernel log after the miner running 15mins then we will double check the reason and solutions for you 

   

  评论操作 固定链接
• 

  Anatolii

  • 2021年06月21日 08:12

  Dear Jessica, i hope that i copied right info.

  ASIC worked by a wrong way 19 and 20 june. 

  But today 21 june it working good. 

  0

  评论操作 固定链接
• 

  Nick

  • 2021年06月21日 08:32

  Dear

  Don't worry that the temperature and fan speed provided by your problem below are within the normal range, and the fan speed  and temp will be adjusted automatically according to the situation，It's normal as long as it's within the normal range

  （

  When temperature goals 84-85C fans working on a speed over 6000

  then temperature gets 71-72C fans working on a speed 3000, so temperature moves to 84-85C

  and it goes on a circle.

  usually temperature was 74-75 and fun speed 4800 +/-

  I restarted asic a few times, restored factory settings, clean from dust, but it does not help.

  ）

  0

  评论操作 固定链接

请先登录再写评论。