评论

6 条评论

  • 正式评论

    Dear

    we checked it showed ERROR_TEMP_TOO_HIGH in the kernel log , please try the below instructions

    1 Please check and adjust the ambient temperature of the machine

    2 please check and adjust the antminer's ventilation

    3 please low down the abbient temp based on the below

    High temperature alert and protection

    https://support.bitmain.com/hc/en-us/articles/360008523893-High-temperature-alert-and-protection

     

    评论操作 固定链接

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 195704K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 33672K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 20632K (cc6db000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 33/12, WL threshold: 4096, image sequence number: 262741923
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): recovery needed
    UBIFS (ubi0:0): recovery completed
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 9916/7944, WL threshold: 4096, image sequence number: 3563076859
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): recovery needed
    UBIFS (ubi1:0): recovery completed
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb54000
    *base_vir_addr = 0xb023
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    2021-05-25 14:07:00:thread.c:1555:create_bitmain_soc_init_thread: create thread
    2021-05-25 14:07:00:driver-btm-api.c:682:init_freq_mode: This is scan-user version
    2021-05-25 14:07:00:driver-btm-api.c:2518:bitmain_soc_init: Miner compile time: Fri Jan 8 22:35:06 CST 2021 type: Antminer T17e
    2021-05-25 14:07:00:driver-btm-api.c:2519:bitmain_soc_init: commit version: 37668c9 2021-01-08 18:20:11, build by: jenkins 2021-01-08 22:39:58
    2021-05-25 14:07:00:driver-btm-api.c:2520:bitmain_soc_init: opt_multi_version = 1
    2021-05-25 14:07:00:driver-btm-api.c:2521:bitmain_soc_init: opt_bitmain_ab = 1
    2021-05-25 14:07:00:driver-btm-api.c:2522:bitmain_soc_init: mid_auto_gen = 0
    2021-05-25 14:07:00:driver-btm-api.c:2523:bitmain_soc_init: work_mode = 0
    2021-05-25 14:07:00:driver-btm-api.c:2524:bitmain_soc_init: power_feedback_en = true
    2021-05-25 14:07:00:driver-btm-api.c:2067:show_sn: no SN got, please write SN to /config/sn
    2021-05-25 14:07:00:driver-btm-api.c:1384:miner_device_init: Detect 256MB control board of XILINX
    2021-05-25 14:07:00:driver-btm-api.c:1325:init_fan_parameter: fan_eft : 0 fan_pwm : 0
    2021-05-25 14:07:06:driver-btm-api.c:1309:init_miner_version: miner ID : 8102a50c2b10481c
    2021-05-25 14:07:06:driver-btm-api.c:1315:init_miner_version: FPGA Version = 0xB023
    2021-05-25 14:07:11:auto_adapt.c:100:_get_board_info: chain[0] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
    2021-05-25 14:07:11:auto_adapt.c:100:_get_board_info: chain[1] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
    2021-05-25 14:07:11:auto_adapt.c:100:_get_board_info: chain[2] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
    2021-05-25 14:07:11:driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
    2021-05-25 14:07:11 voltage[0] = 1840
    2021-05-25 14:07:11 voltage[1] = 1840
    2021-05-25 14:07:11 voltage[2] = 1840
    2021-05-25 14:07:11:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed
    voltage_ref = 1840
    2100 2100 2100 2100 2100 2100
    2100 2100 2100 2100 2100 2100
    2100 2100 2100 2100 2100 2100
    2100 2100 2100 2100 2100 2060
    2100 2100 2100 2100 2070 2020
    2070 2060 2060 2050 2020 1970
    2020 2010 2010 2000 1980 1920
    1980 1970 1960 1950 1910 1860
    1980 1970 1960 1950 1910 1860

    2021-05-25 14:07:11:thread.c:1523:create_read_nonce_reg_thread: create thread
    2021-05-25 14:07:11:driver-btm-api.c:698:dump_pcb_bom_version: Chain [0] PCB Version: 0x010a
    2021-05-25 14:07:11:driver-btm-api.c:699:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
    2021-05-25 14:07:11:driver-btm-api.c:698:dump_pcb_bom_version: Chain [1] PCB Version: 0x010a
    2021-05-25 14:07:11:driver-btm-api.c:699:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
    2021-05-25 14:07:11:driver-btm-api.c:698:dump_pcb_bom_version: Chain [2] PCB Version: 0x010a
    2021-05-25 14:07:11:driver-btm-api.c:699:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
    2021-05-25 14:07:18:driver-btm-api.c:2344:bitmain_board_init: Fan check passed.
    2021-05-25 14:07:19:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app
    2021-05-25 14:07:21:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
    2021-05-25 14:07:22:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2021-05-25 14:07:24:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
    2021-05-25 14:07:25:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2021-05-25 14:07:27:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
    2021-05-25 14:07:27:thread.c:1518:create_pic_heart_beat_thread: create thread
    2021-05-25 14:07:29:power_api.c:241:power_init: power type version: 0x0042
    2021-05-25 14:07:30:power_api.c:259:power_init: Power init:
    2021-05-25 14:07:30:power_api.c:260:power_init: current_voltage_raw = 2136
    2021-05-25 14:07:30:power_api.c:261:power_init: highest_voltage_raw = 2000
    2021-05-25 14:07:30:power_api.c:262:power_init: working_voltage_raw = 1800
    2021-05-25 14:07:30:power_api.c:263:power_init: higher_voltage_raw = 1850
    2021-05-25 14:07:30:power_api.c:264:power_init: check_asic_voltage_raw = 1800
    2021-05-25 14:07:30:driver-btm-api.c:2354:bitmain_board_init: Enter 60s sleep to make sure power release finish.
    2021-05-25 14:08:32:driver-btm-api.c:1123:check_asic_number_until_volt_balance: THIS is No.1 time boost asic:
    2021-05-25 14:08:32:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800
    2021-05-25 14:08:35:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
    2021-05-25 14:08:56:uart.c:69:set_baud: set UART baud to 115200
    chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
    2021-05-25 14:09:02:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[0]: find 78 asic, times 0
    chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
    2021-05-25 14:09:06:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 78 asic, times 0
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
    2021-05-25 14:09:10:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 78 asic, times 0
    2021-05-25 14:09:10:driver-btm-api.c:1163:check_asic_number_until_volt_balance: PASS: volt balance at No.1 time boost asic.
    2021-05-25 14:09:10:power_api.c:364:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step.
    2021-05-25 14:09:35:driver-hash-chip.c:876:set_uart_relay: set uart relay to 0x330003
    2021-05-25 14:09:35:driver-hash-chip.c:1264:set_ldo_ctrl: Set LDO to 0x2000203
    2021-05-25 14:09:35:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
    chain 0 domain 0: d0 0.382, d1 0.382, d2 0.393, d3 0.341, sum = 1.497070
    chain 0 domain 1: d0 0.382, d1 0.389, d2 0.404, d3 0.392, sum = 1.566711
    chain 0 domain 2: d0 0.374, d1 0.375, d2 0.397, d3 0.374, sum = 1.519226
    chain 0 domain 3: d0 0.398, d1 0.388, d2 0.410, d3 0.399, sum = 1.595459
    chain 0 domain 4: d0 0.373, d1 0.381, d2 0.379, d3 0.364, sum = 1.497009
    chain 0 domain 5: d0 0.380, d1 0.372, d2 0.387, d3 0.369, sum = 1.508545
    chain 0 domain 6: d0 0.368, d1 0.372, d2 0.371, d3 0.369, sum = 1.479736
    chain 0 domain 7: d0 0.377, d1 0.380, d2 0.385, d3 0.358, sum = 1.499817
    chain 0 domain 8: d0 0.382, d1 0.387, d2 0.380, d3 0.363, sum = 1.510925
    chain 0 domain 9: d0 0.389, d1 0.391, d2 0.386, d3 0.388, sum = 1.554199
    chain 0 domain 10: d0 0.384, d1 0.380, d2 0.402, d3 0.389, sum = 1.555298
    chain 0 domain 11: d0 0.392, d1 0.387, d2 0.395, d3 0.391, sum = 1.565369
    chain 0 domain 12: d0 0.360, d1 0.358, d2 0.358, d3 0.358, sum = 1.433838
    2021-05-25 14:09:36:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout.
    chain 1 domain 0: d0 0.374, d1 0.370, d2 0.386, d3 0.362, sum = 1.491943
    chain 1 domain 1: d0 0.383, d1 0.383, d2 0.388, d3 0.385, sum = 1.538391
    chain 1 domain 2: d0 0.386, d1 0.385, d2 0.391, d3 0.387, sum = 1.548645
    chain 1 domain 3: d0 0.374, d1 0.371, d2 0.372, d3 0.376, sum = 1.493103
    chain 1 domain 4: d0 0.396, d1 0.397, d2 0.399, d3 0.397, sum = 1.589478
    chain 1 domain 5: d0 0.383, d1 0.381, d2 0.390, d3 0.344, sum = 1.498413
    chain 1 domain 6: d0 0.393, d1 0.385, d2 0.382, d3 0.387, sum = 1.546753
    chain 1 domain 7: d0 0.374, d1 0.378, d2 0.380, d3 0.363, sum = 1.495361
    chain 1 domain 8: d0 0.368, d1 0.372, d2 0.389, d3 0.357, sum = 1.486084
    chain 1 domain 9: d0 0.376, d1 0.381, d2 0.370, d3 0.368, sum = 1.496155
    chain 1 domain 10: d0 0.375, d1 0.383, d2 0.369, d3 0.370, sum = 1.497620
    chain 1 domain 11: d0 0.361, d1 0.369, d2 0.360, d3 0.357, sum = 1.446899
    chain 1 domain 12: d0 0.368, d1 0.374, d2 0.376, d3 0.370, sum = 1.489075
    2021-05-25 14:09:37:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
    chain 2 domain 0: d0 0.405, d1 0.390, d2 0.391, d3 0.395, sum = 1.580261
    chain 2 domain 1: d0 0.394, d1 0.393, d2 0.386, d3 0.390, sum = 1.562439
    chain 2 domain 2: d0 0.393, d1 0.387, d2 0.401, d3 0.394, sum = 1.574829
    chain 2 domain 3: d0 0.398, d1 0.391, d2 0.393, d3 0.394, sum = 1.575745
    chain 2 domain 4: d0 0.395, d1 0.388, d2 0.376, d3 0.386, sum = 1.545837
    chain 2 domain 5: d0 0.380, d1 0.376, d2 0.382, d3 0.357, sum = 1.493958
    chain 2 domain 6: d0 0.390, d1 0.393, d2 0.374, d3 0.385, sum = 1.541382
    chain 2 domain 7: d0 0.368, d1 0.370, d2 0.362, d3 0.378, sum = 1.477112
    chain 2 domain 8: d0 0.364, d1 0.369, d2 0.367, d3 0.364, sum = 1.463867
    chain 2 domain 9: d0 0.382, d1 0.382, d2 0.368, d3 0.370, sum = 1.502136
    chain 2 domain 10: d0 0.377, d1 0.377, d2 0.362, d3 0.372, sum = 1.488586
    chain 2 domain 11: d0 0.380, d1 0.380, d2 0.362, d3 0.370, sum = 1.492188
    chain 2 domain 12: d0 0.355, d1 0.347, d2 0.341, d3 0.343, sum = 1.386047
    2021-05-25 14:09:37:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
    2021-05-25 14:09:38:temperature.c:272:calibrate_temp_sensor_one_chain: chain 0 temp sensor TMP451
    2021-05-25 14:09:40:temperature.c:272:calibrate_temp_sensor_one_chain: chain 1 temp sensor TMP451
    2021-05-25 14:09:41:temperature.c:272:calibrate_temp_sensor_one_chain: chain 2 temp sensor TMP451
    2021-05-25 14:09:47:driver-btm-api.c:311:check_bringup_temp: Bring up temperature is 28
    2021-05-25 14:09:47:uart.c:69:set_baud: set UART baud to 3000000
    2021-05-25 14:09:47 voltage[0] = 1840
    2021-05-25 14:09:47 voltage[1] = 1840
    2021-05-25 14:09:47 voltage[2] = 1840
    2021-05-25 14:09:47:power_api.c:272:set_working_voltage_raw: working_voltage_raw = 1840
    2021-05-25 14:09:47:thread.c:1538:create_check_miner_status_thread: create thread
    2021-05-25 14:09:47:thread.c:1528:create_show_miner_status_thread: create thread
    2021-05-25 14:09:47:thread.c:1503:create_temperature_monitor_thread: create thread
    2021-05-25 14:09:47:thread.c:1580:create_fan_monitor_thread: create thread
    2021-05-25 14:09:47:frequency.c:578:inc_freq_with_fixed_vco: chain = 255, freq = 565, is_higher_voltage = true
    2021-05-25 14:09:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 34, chip_temp 31 ~ 42, now 6.0s, target 42.0
    2021-05-25 14:09:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 34, chip_temp 32 ~ 42, now 7.0s, target 42.2
    2021-05-25 14:09:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 34, chip_temp 31 ~ 42, now 8.0s, target 42.3
    2021-05-25 14:09:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 34, chip_temp 32 ~ 42, now 9.0s, target 42.5
    2021-05-25 14:09:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 34, chip_temp 32 ~ 42, now 10.0s, target 42.7
    2021-05-25 14:09:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 34, chip_temp 32 ~ 42, now 11.0s, target 42.8
    2021-05-25 14:09:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 35, chip_temp 32 ~ 42, now 12.0s, target 43.0
    2021-05-25 14:10:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 35, chip_temp 31 ~ 43, now 13.0s, target 43.2
    2021-05-25 14:10:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 35, chip_temp 31 ~ 43, now 14.0s, target 43.3
    2021-05-25 14:10:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 35, chip_temp 31 ~ 43, now 15.0s, target 43.5
    2021-05-25 14:10:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 35, chip_temp 31 ~ 43, now 16.0s, target 43.7
    2021-05-25 14:10:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 35, chip_temp 31 ~ 44, now 17.0s, target 43.8
    2021-05-25 14:10:04:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 44 > 43.8 target_temp.
    2021-05-25 14:10:10:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 36, chip_temp 32 ~ 44, now 23.0s, target 44.8
    2021-05-25 14:10:11:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 36, chip_temp 31 ~ 44, now 24.0s, target 45.0
    2021-05-25 14:10:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 36, chip_temp 32 ~ 44, now 25.0s, target 45.2
    2021-05-25 14:10:13:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 36, chip_temp 32 ~ 44, now 26.0s, target 45.3
    2021-05-25 14:10:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 37, chip_temp 32 ~ 45, now 27.0s, target 45.5
    2021-05-25 14:10:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 37, chip_temp 32 ~ 45, now 28.0s, target 45.7
    2021-05-25 14:10:16:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 37, chip_temp 32 ~ 45, now 29.0s, target 45.8
    2021-05-25 14:10:17:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 37, chip_temp 32 ~ 45, now 30.0s, target 46.0
    2021-05-25 14:10:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 37, chip_temp 32 ~ 45, now 31.0s, target 46.2
    2021-05-25 14:10:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 37, chip_temp 32 ~ 45, now 32.0s, target 46.3
    2021-05-25 14:10:20:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 37, chip_temp 32 ~ 45, now 33.0s, target 46.5
    2021-05-25 14:10:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 37, chip_temp 32 ~ 45, now 34.0s, target 46.7
    2021-05-25 14:10:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 38, chip_temp 32 ~ 45, now 35.0s, target 46.8
    2021-05-25 14:10:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 38, chip_temp 32 ~ 46, now 36.0s, target 47.0
    2021-05-25 14:10:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 38, chip_temp 32 ~ 46, now 37.0s, target 47.2
    2021-05-25 14:10:25:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 38, chip_temp 32 ~ 46, now 38.0s, target 47.3
    2021-05-25 14:10:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 38, chip_temp 32 ~ 46, now 39.0s, target 47.5
    2021-05-25 14:10:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 38, chip_temp 32 ~ 46, now 40.1s, target 47.7
    2021-05-25 14:10:28:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 38, chip_temp 32 ~ 46, now 41.1s, target 47.8
    2021-05-25 14:10:29:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 38, chip_temp 32 ~ 46, now 42.1s, target 48.0
    2021-05-25 14:10:29:frequency.c:657:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 57
    2021-05-25 14:10:29:frequency.c:665:inc_freq_with_fixed_vco: set to 57M, get pcb 29 ~ 38, chip_temp 32 ~ 46
    2021-05-25 14:10:29:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2100, step by step.
    2021-05-25 14:10:42:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:10:42:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 57 clock_counter_limit 6, no check, skip.
    2021-05-25 14:10:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 40, chip_temp 32 ~ 49, now 62.8s, target 51.5
    2021-05-25 14:10:50:frequency.c:657:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 67
    2021-05-25 14:10:50:frequency.c:665:inc_freq_with_fixed_vco: set to 67M, get pcb 29 ~ 40, chip_temp 32 ~ 49
    2021-05-25 14:10:50:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:10:50:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 67 clock_counter_limit 7, no check, skip.
    2021-05-25 14:10:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 41, chip_temp 32 ~ 50, now 70.8s, target 52.8
    2021-05-25 14:10:58:frequency.c:657:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 78
    2021-05-25 14:10:58:frequency.c:665:inc_freq_with_fixed_vco: set to 78M, get pcb 29 ~ 41, chip_temp 32 ~ 50
    2021-05-25 14:10:58:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:10:58:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 78 clock_counter_limit 9, no check, skip.
    2021-05-25 14:11:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 42, chip_temp 33 ~ 51, now 78.8s, target 54.1
    2021-05-25 14:11:06:frequency.c:657:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 80
    2021-05-25 14:11:06:frequency.c:665:inc_freq_with_fixed_vco: set to 80M, get pcb 29 ~ 42, chip_temp 33 ~ 51
    2021-05-25 14:11:06:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:11:06:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 80 clock_counter_limit 9, no check, skip.
    2021-05-25 14:11:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 43, chip_temp 33 ~ 53, now 86.8s, target 55.5
    2021-05-25 14:11:14:frequency.c:657:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 94
    2021-05-25 14:11:14:frequency.c:665:inc_freq_with_fixed_vco: set to 94M, get pcb 29 ~ 43, chip_temp 33 ~ 53
    2021-05-25 14:11:14:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:11:14:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 94 clock_counter_limit 12, no check, skip.
    2021-05-25 14:11:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 44, chip_temp 33 ~ 54, now 94.8s, target 56.8
    2021-05-25 14:11:22:frequency.c:657:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 100
    2021-05-25 14:11:22:frequency.c:665:inc_freq_with_fixed_vco: set to 100M, get pcb 29 ~ 44, chip_temp 33 ~ 54
    2021-05-25 14:11:22:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:11:22:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 100 clock_counter_limit 13, no check, skip.
    2021-05-25 14:11:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 45, chip_temp 34 ~ 56, now 102.8s, target 58.1
    2021-05-25 14:11:30:frequency.c:657:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 113
    2021-05-25 14:11:30:frequency.c:665:inc_freq_with_fixed_vco: set to 113M, get pcb 29 ~ 45, chip_temp 34 ~ 56
    2021-05-25 14:11:30:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:11:30:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 113 clock_counter_limit 15, no check, skip.
    2021-05-25 14:11:38:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 46, chip_temp 34 ~ 58, now 110.8s, target 59.5
    2021-05-25 14:11:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 46, chip_temp 34 ~ 58, now 111.8s, target 59.6
    2021-05-25 14:11:40:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 46, chip_temp 34 ~ 58, now 112.9s, target 59.8
    2021-05-25 14:11:41:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 46, chip_temp 34 ~ 58, now 113.9s, target 60.0
    2021-05-25 14:11:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 46, chip_temp 34 ~ 59, now 114.9s, target 60.1
    2021-05-25 14:11:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 47, chip_temp 34 ~ 59, now 115.9s, target 60.3
    2021-05-25 14:11:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 47, chip_temp 34 ~ 59, now 116.9s, target 60.5
    2021-05-25 14:11:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 47, chip_temp 34 ~ 59, now 117.9s, target 60.6
    2021-05-25 14:11:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 47, chip_temp 34 ~ 59, now 118.9s, target 60.8
    2021-05-25 14:11:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 47, chip_temp 34 ~ 59, now 119.9s, target 61.0
    2021-05-25 14:11:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 47, chip_temp 34 ~ 60, now 120.9s, target 61.1
    2021-05-25 14:11:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 47, chip_temp 34 ~ 60, now 121.9s, target 61.3
    2021-05-25 14:11:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 48, chip_temp 34 ~ 60, now 122.9s, target 61.5
    2021-05-25 14:11:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 48, chip_temp 34 ~ 60, now 123.9s, target 61.6
    2021-05-25 14:11:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 48, chip_temp 34 ~ 60, now 124.9s, target 61.8
    2021-05-25 14:11:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 48, chip_temp 34 ~ 60, now 125.9s, target 62.0
    2021-05-25 14:11:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 48, chip_temp 34 ~ 61, now 126.9s, target 62.1
    2021-05-25 14:11:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 48, chip_temp 34 ~ 61, now 127.9s, target 62.3
    2021-05-25 14:11:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 48, chip_temp 34 ~ 61, now 128.9s, target 62.5
    2021-05-25 14:11:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 49, chip_temp 34 ~ 61, now 129.9s, target 62.6
    2021-05-25 14:11:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 49, chip_temp 34 ~ 61, now 130.9s, target 62.8
    2021-05-25 14:11:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 49, chip_temp 34 ~ 61, now 131.9s, target 63.0
    2021-05-25 14:12:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 49, chip_temp 34 ~ 61, now 132.9s, target 63.1
    2021-05-25 14:12:00:frequency.c:657:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 117
    2021-05-25 14:12:00:frequency.c:665:inc_freq_with_fixed_vco: set to 117M, get pcb 30 ~ 49, chip_temp 34 ~ 61
    2021-05-25 14:12:00:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:12:00:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 117 clock_counter_limit 15, no check, skip.
    2021-05-25 14:12:08:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 50, chip_temp 35 ~ 63, now 140.9s, target 64.5
    2021-05-25 14:12:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 50, chip_temp 35 ~ 63, now 141.9s, target 64.6
    2021-05-25 14:12:10:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 50, chip_temp 35 ~ 63, now 142.9s, target 64.8
    2021-05-25 14:12:11:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 50, chip_temp 35 ~ 63, now 143.9s, target 65.0
    2021-05-25 14:12:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 50, chip_temp 35 ~ 63, now 144.9s, target 65.1
    2021-05-25 14:12:12:frequency.c:657:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 134
    2021-05-25 14:12:12:frequency.c:665:inc_freq_with_fixed_vco: set to 134M, get pcb 30 ~ 50, chip_temp 35 ~ 63
    2021-05-25 14:12:12:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:12:12:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 134 clock_counter_limit 18, no check, skip.
    2021-05-25 14:12:20:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 51, chip_temp 35 ~ 65, now 152.9s, target 66.5
    2021-05-25 14:12:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 51, chip_temp 35 ~ 65, now 153.9s, target 66.6
    2021-05-25 14:12:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 52, chip_temp 35 ~ 65, now 154.9s, target 66.8
    2021-05-25 14:12:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 52, chip_temp 35 ~ 65, now 155.9s, target 67.0
    2021-05-25 14:12:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 52, chip_temp 35 ~ 65, now 156.9s, target 67.2
    2021-05-25 14:12:24:frequency.c:657:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 141
    2021-05-25 14:12:24:frequency.c:665:inc_freq_with_fixed_vco: set to 141M, get pcb 30 ~ 52, chip_temp 35 ~ 65
    2021-05-25 14:12:24:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:12:24:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 141 clock_counter_limit 19, no check, skip.
    2021-05-25 14:12:32:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 53, chip_temp 35 ~ 67, now 164.9s, target 68.5
    2021-05-25 14:12:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 53, chip_temp 35 ~ 67, now 165.9s, target 68.7
    2021-05-25 14:12:34:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 53, chip_temp 35 ~ 67, now 166.9s, target 68.8
    2021-05-25 14:12:35:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 53, chip_temp 35 ~ 67, now 167.9s, target 69.0
    2021-05-25 14:12:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 53, chip_temp 35 ~ 67, now 168.9s, target 69.2
    2021-05-25 14:12:36:frequency.c:657:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 156
    2021-05-25 14:12:36:frequency.c:665:inc_freq_with_fixed_vco: set to 156M, get pcb 30 ~ 53, chip_temp 35 ~ 67
    2021-05-25 14:12:36:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:12:36:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 156 clock_counter_limit 21, no check, skip.
    2021-05-25 14:12:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 54, chip_temp 36 ~ 69, now 177.0s, target 70.5
    2021-05-25 14:12:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 55, chip_temp 36 ~ 70, now 178.0s, target 70.7
    2021-05-25 14:12:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 55, chip_temp 36 ~ 70, now 179.0s, target 70.8
    2021-05-25 14:12:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 55, chip_temp 36 ~ 70, now 180.0s, target 71.0
    2021-05-25 14:12:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 55, chip_temp 36 ~ 70, now 181.0s, target 71.2
    2021-05-25 14:12:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 55, chip_temp 36 ~ 70, now 182.0s, target 71.3
    2021-05-25 14:12:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 55, chip_temp 36 ~ 70, now 183.0s, target 71.5
    2021-05-25 14:12:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 55, chip_temp 36 ~ 71, now 184.0s, target 71.7
    2021-05-25 14:12:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 56, chip_temp 36 ~ 71, now 185.0s, target 71.8
    2021-05-25 14:12:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 56, chip_temp 36 ~ 71, now 186.0s, target 72.0
    2021-05-25 14:12:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 56, chip_temp 36 ~ 71, now 187.0s, target 72.2
    2021-05-25 14:12:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 56, chip_temp 36 ~ 71, now 188.0s, target 72.3
    2021-05-25 14:12:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 56, chip_temp 36 ~ 71, now 189.0s, target 72.5
    2021-05-25 14:12:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 56, chip_temp 36 ~ 72, now 190.0s, target 72.7
    2021-05-25 14:12:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 56, chip_temp 36 ~ 72, now 191.0s, target 72.8
    2021-05-25 14:12:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 57, chip_temp 36 ~ 72, now 192.0s, target 73.0
    2021-05-25 14:13:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 57, chip_temp 36 ~ 72, now 193.0s, target 73.2
    2021-05-25 14:13:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 57, chip_temp 36 ~ 72, now 194.0s, target 73.3
    2021-05-25 14:13:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 57, chip_temp 36 ~ 72, now 195.0s, target 73.5
    2021-05-25 14:13:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 57, chip_temp 36 ~ 73, now 196.0s, target 73.7
    2021-05-25 14:13:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 57, chip_temp 36 ~ 73, now 197.0s, target 73.8
    2021-05-25 14:13:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 57, chip_temp 36 ~ 73, now 198.0s, target 74.0
    2021-05-25 14:13:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 58, chip_temp 36 ~ 73, now 199.0s, target 74.2
    2021-05-25 14:13:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 58, chip_temp 36 ~ 73, now 200.0s, target 74.3
    2021-05-25 14:13:08:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 58, chip_temp 36 ~ 73, now 201.0s, target 74.5
    2021-05-25 14:13:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 58, chip_temp 36 ~ 73, now 202.0s, target 74.7
    2021-05-25 14:13:10:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 58, chip_temp 36 ~ 73, now 203.0s, target 74.8
    2021-05-25 14:13:11:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 58, chip_temp 36 ~ 74, now 204.0s, target 75.0
    2021-05-25 14:13:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 58, chip_temp 36 ~ 74, now 205.0s, target 75.2
    2021-05-25 14:13:13:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 58, chip_temp 36 ~ 74, now 206.0s, target 75.3
    2021-05-25 14:13:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 59, chip_temp 36 ~ 74, now 207.0s, target 75.5
    2021-05-25 14:13:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 59, chip_temp 36 ~ 74, now 208.0s, target 75.7
    2021-05-25 14:13:16:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 59, chip_temp 36 ~ 74, now 209.0s, target 75.8
    2021-05-25 14:13:17:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 59, chip_temp 36 ~ 74, now 210.0s, target 76.0
    2021-05-25 14:13:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 59, chip_temp 36 ~ 74, now 211.0s, target 76.2
    2021-05-25 14:13:18:frequency.c:657:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 188
    2021-05-25 14:13:18:frequency.c:665:inc_freq_with_fixed_vco: set to 188M, get pcb 31 ~ 59, chip_temp 36 ~ 74
    2021-05-25 14:13:18:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:13:18:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 188 clock_counter_limit 27, no check, skip.
    2021-05-25 14:13:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 60, chip_temp 37 ~ 77, now 219.0s, target 77.5
    2021-05-25 14:13:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 60, chip_temp 37 ~ 77, now 220.0s, target 77.7
    2021-05-25 14:13:28:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 60, chip_temp 37 ~ 77, now 221.0s, target 77.8
    2021-05-25 14:13:29:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 60, chip_temp 37 ~ 78, now 222.0s, target 78.0
    2021-05-25 14:13:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 61, chip_temp 37 ~ 78, now 223.0s, target 78.2
    2021-05-25 14:13:31:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 61, chip_temp 37 ~ 78, now 224.0s, target 78.3
    2021-05-25 14:13:32:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 61, chip_temp 37 ~ 78, now 225.0s, target 78.5
    2021-05-25 14:13:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 61, chip_temp 37 ~ 78, now 226.0s, target 78.7
    2021-05-25 14:13:34:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 61, chip_temp 37 ~ 79, now 227.0s, target 78.8
    2021-05-25 14:13:34:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 79 > 78.8 target_temp.
    2021-05-25 14:13:40:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 62, chip_temp 37 ~ 80, now 233.0s, target 79.8
    2021-05-25 14:13:40:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 80 > 79.8 target_temp.
    2021-05-25 14:13:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 63, chip_temp 37 ~ 81, now 239.0s, target 80.8
    2021-05-25 14:13:46:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 81 > 80.8 target_temp.
    2021-05-25 14:13:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 64, chip_temp 37 ~ 82, now 245.0s, target 81.8
    2021-05-25 14:13:52:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 82 > 81.8 target_temp.
    2021-05-25 14:13:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 64, chip_temp 37 ~ 82, now 251.0s, target 82.8
    2021-05-25 14:13:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 65, chip_temp 37 ~ 82, now 252.0s, target 83.0
    2021-05-25 14:14:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 65, chip_temp 37 ~ 83, now 253.0s, target 83.2
    2021-05-25 14:14:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 65, chip_temp 37 ~ 83, now 254.0s, target 83.3
    2021-05-25 14:14:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 65, chip_temp 37 ~ 83, now 255.0s, target 83.5
    2021-05-25 14:14:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 65, chip_temp 37 ~ 83, now 256.0s, target 83.7
    2021-05-25 14:14:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 65, chip_temp 37 ~ 83, now 257.0s, target 83.8
    2021-05-25 14:14:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 65, chip_temp 37 ~ 83, now 258.0s, target 84.0
    2021-05-25 14:14:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 65, chip_temp 37 ~ 83, now 259.0s, target 84.2
    2021-05-25 14:14:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 66, chip_temp 37 ~ 64, now 260.0s, target 84.3
    2021-05-25 14:14:07:frequency.c:657:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 201
    2021-05-25 14:14:07:frequency.c:665:inc_freq_with_fixed_vco: set to 201M, get pcb 31 ~ 66, chip_temp 37 ~ 64
    2021-05-25 14:14:07:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:14:07:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 201 clock_counter_limit 29, no check, skip.
    2021-05-25 14:14:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 66, chip_temp 38 ~ 65, now 268.0s, target 67.7
    2021-05-25 14:14:15:frequency.c:657:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 235
    2021-05-25 14:14:15:frequency.c:665:inc_freq_with_fixed_vco: set to 235M, get pcb 31 ~ 66, chip_temp 38 ~ 65
    2021-05-25 14:14:15:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:14:15:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 235 clock_counter_limit 34, no check, skip.
    2021-05-25 14:14:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 68, chip_temp 39 ~ 67, now 276.1s, target 69.0
    2021-05-25 14:14:23:frequency.c:657:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 282
    2021-05-25 14:14:23:frequency.c:665:inc_freq_with_fixed_vco: set to 282M, get pcb 31 ~ 68, chip_temp 39 ~ 67
    2021-05-25 14:14:23:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:14:23:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 282 clock_counter_limit 42, no check, skip.
    2021-05-25 14:14:31:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 69, chip_temp 40 ~ 72, now 284.1s, target 70.3
    2021-05-25 14:14:31:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 72 > 70.3 target_temp.
    2021-05-25 14:14:37:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 70, chip_temp 40 ~ 73, now 290.1s, target 71.3
    2021-05-25 14:14:37:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 73 > 71.3 target_temp.
    2021-05-25 14:14:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 72, chip_temp 40 ~ 75, now 296.1s, target 72.3
    2021-05-25 14:14:43:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 75 > 72.3 target_temp.
    2021-05-25 14:14:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 74, chip_temp 40 ~ 77, now 302.1s, target 73.3
    2021-05-25 14:14:49:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 77 > 73.3 target_temp.
    2021-05-25 14:14:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 55, chip_temp 41 ~ 78, now 308.1s, target 74.3
    2021-05-25 14:14:55:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 78 > 74.3 target_temp.
    2021-05-25 14:15:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 56, chip_temp 41 ~ 79, now 314.1s, target 75.3
    2021-05-25 14:15:01:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 79 > 75.3 target_temp.
    2021-05-25 14:15:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 57, chip_temp 41 ~ 80, now 320.1s, target 76.3
    2021-05-25 14:15:07:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 80 > 76.3 target_temp.
    2021-05-25 14:15:13:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 58, chip_temp 41 ~ 81, now 326.1s, target 77.3
    2021-05-25 14:15:13:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 81 > 77.3 target_temp.
    2021-05-25 14:15:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 58, chip_temp 41 ~ 82, now 332.1s, target 78.3
    2021-05-25 14:15:19:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 82 > 78.3 target_temp.
    2021-05-25 14:15:25:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 59, chip_temp 41 ~ 83, now 338.1s, target 79.3
    2021-05-25 14:15:25:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 83 > 79.3 target_temp.
    2021-05-25 14:15:31:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 60, chip_temp 41 ~ 83, now 344.1s, target 80.3
    2021-05-25 14:15:31:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 83 > 80.3 target_temp.
    2021-05-25 14:15:37:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 60, chip_temp 41 ~ 84, now 350.1s, target 81.3
    2021-05-25 14:15:37:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 84 > 81.3 target_temp.
    2021-05-25 14:15:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 61, chip_temp 42 ~ 85, now 356.1s, target 82.3
    2021-05-25 14:15:43:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 85 > 82.3 target_temp.
    2021-05-25 14:15:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 61, chip_temp 42 ~ 85, now 362.1s, target 83.3
    2021-05-25 14:15:49:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 85 > 83.3 target_temp.
    2021-05-25 14:15:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 62, chip_temp 41 ~ 86, now 368.1s, target 84.3
    2021-05-25 14:15:55:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 86 > 84.3 target_temp.
    2021-05-25 14:16:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 62, chip_temp 41 ~ 86, now 374.1s, target 85.3
    2021-05-25 14:16:01:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 86 > 85.3 target_temp.
    2021-05-25 14:16:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 62, chip_temp 41 ~ 87, now 380.1s, target 86.4
    2021-05-25 14:16:07:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 87 > 86.4 target_temp.
    2021-05-25 14:16:13:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 63, chip_temp 42 ~ 87, now 386.1s, target 87.4
    2021-05-25 14:16:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 63, chip_temp 41 ~ 87, now 387.1s, target 87.5
    2021-05-25 14:16:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 63, chip_temp 42 ~ 87, now 388.1s, target 87.7
    2021-05-25 14:16:16:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 63, chip_temp 42 ~ 87, now 389.1s, target 87.9
    2021-05-25 14:16:17:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 63, chip_temp 41 ~ 87, now 390.1s, target 88.0
    2021-05-25 14:16:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 63, chip_temp 42 ~ 87, now 391.1s, target 88.2
    2021-05-25 14:16:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 63, chip_temp 42 ~ 87, now 392.1s, target 88.4
    2021-05-25 14:16:20:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 63, chip_temp 42 ~ 87, now 393.1s, target 88.5
    2021-05-25 14:16:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 63, chip_temp 42 ~ 88, now 394.1s, target 88.7
    2021-05-25 14:16:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 63, chip_temp 42 ~ 87, now 395.1s, target 88.9
    2021-05-25 14:16:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 63, chip_temp 41 ~ 87, now 396.1s, target 89.0
    2021-05-25 14:16:23:frequency.c:657:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 403
    2021-05-25 14:16:23:frequency.c:665:inc_freq_with_fixed_vco: set to 403M, get pcb 33 ~ 63, chip_temp 41 ~ 87
    2021-05-25 14:16:23:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2020, step by step.
    2021-05-25 14:16:35:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
    chain 0 domain 0: d0 0.394, d1 0.387, d2 0.391, d3 0.390, sum = 1.562012
    chain 0 domain 1: d0 0.403, d1 0.392, d2 0.393, d3 0.396, sum = 1.583923
    chain 0 domain 2: d0 0.385, d1 0.380, d2 0.381, d3 0.382, sum = 1.527344
    chain 0 domain 3: d0 0.397, d1 0.403, d2 0.392, d3 0.397, sum = 1.588257
    chain 0 domain 4: d0 0.383, d1 0.378, d2 0.400, d3 0.336, sum = 1.497253
    chain 0 domain 5: d0 0.392, d1 0.374, d2 0.372, d3 0.379, sum = 1.517456
    chain 0 domain 6: d0 0.378, d1 0.377, d2 0.378, d3 0.371, sum = 1.502930
    chain 0 domain 7: d0 0.382, d1 0.374, d2 0.385, d3 0.380, sum = 1.521667
    chain 0 domain 8: d0 0.377, d1 0.375, d2 0.382, d3 0.355, sum = 1.488647
    chain 0 domain 9: d0 0.384, d1 0.387, d2 0.368, d3 0.366, sum = 1.505005
    chain 0 domain 10: d0 0.386, d1 0.388, d2 0.359, d3 0.378, sum = 1.511230
    chain 0 domain 11: d0 0.392, d1 0.380, d2 0.387, d3 0.364, sum = 1.522583
    chain 0 domain 12: d0 0.375, d1 0.371, d2 0.371, d3 0.371, sum = 1.487732
    2021-05-25 14:16:36:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout.
    chain 1 domain 0: d0 0.403, d1 0.397, d2 0.400, d3 0.400, sum = 1.598389
    chain 1 domain 1: d0 0.413, d1 0.405, d2 0.407, d3 0.408, sum = 1.632812
    chain 1 domain 2: d0 0.424, d1 0.416, d2 0.438, d3 0.426, sum = 1.703857
    chain 1 domain 3: d0 0.430, d1 0.415, d2 0.403, d3 0.416, sum = 1.664307
    chain 1 domain 4: d0 0.429, d1 0.428, d2 0.426, d3 0.427, sum = 1.709412
    chain 1 domain 5: d0 0.422, d1 0.408, d2 0.408, d3 0.412, sum = 1.650330
    chain 1 domain 6: d0 0.395, d1 0.388, d2 0.385, d3 0.389, sum = 1.556030
    chain 1 domain 7: d0 0.347, d1 0.337, d2 0.337, d3 0.343, sum = 1.363525
    chain 1 domain 8: d0 0.307, d1 0.299, d2 0.300, d3 0.303, sum = 1.208740
    chain 1 domain 9: d0 0.338, d1 0.326, d2 0.328, d3 0.332, sum = 1.323608
    chain 1 domain 10: d0 0.360, d1 0.354, d2 0.354, d3 0.356, sum = 1.423828
    chain 1 domain 11: d0 0.385, d1 0.378, d2 0.379, d3 0.353, sum = 1.495728
    chain 1 domain 12: d0 0.404, d1 0.401, d2 0.401, d3 0.402, sum = 1.607971
    2021-05-25 14:16:37:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
    chain 2 domain 0: d0 0.398, d1 0.404, d2 0.405, d3 0.402, sum = 1.609314
    chain 2 domain 1: d0 0.398, d1 0.402, d2 0.382, d3 0.394, sum = 1.574463
    chain 2 domain 2: d0 0.396, d1 0.389, d2 0.390, d3 0.392, sum = 1.566650
    chain 2 domain 3: d0 0.400, d1 0.392, d2 0.393, d3 0.395, sum = 1.578918
    chain 2 domain 4: d0 0.388, d1 0.392, d2 0.384, d3 0.388, sum = 1.552246
    chain 2 domain 5: d0 0.396, d1 0.386, d2 0.371, d3 0.372, sum = 1.524902
    chain 2 domain 6: d0 0.387, d1 0.384, d2 0.385, d3 0.385, sum = 1.540833
    chain 2 domain 7: d0 0.377, d1 0.367, d2 0.371, d3 0.375, sum = 1.491760
    chain 2 domain 8: d0 0.363, d1 0.358, d2 0.355, d3 0.359, sum = 1.434875
    chain 2 domain 9: d0 0.380, d1 0.361, d2 0.389, d3 0.359, sum = 1.488953
    chain 2 domain 10: d0 0.383, d1 0.387, d2 0.362, d3 0.362, sum = 1.494080
    chain 2 domain 11: d0 0.384, d1 0.386, d2 0.373, d3 0.377, sum = 1.520386
    chain 2 domain 12: d0 0.377, d1 0.372, d2 0.369, d3 0.369, sum = 1.486633
    2021-05-25 14:16:37:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
    2021-05-25 14:16:37:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-05-25 14:16:37:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 403 clock_counter_limit 61, no check, skip.
    2021-05-25 14:16:39:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
    chain 0 domain 0: d0 0.397, d1 0.388, d2 0.395, d3 0.393, sum = 1.572327
    chain 0 domain 1: d0 0.405, d1 0.389, d2 0.388, d3 0.394, sum = 1.576721
    chain 0 domain 2: d0 0.391, d1 0.385, d2 0.394, d3 0.381, sum = 1.550903
    chain 0 domain 3: d0 0.394, d1 0.399, d2 0.379, d3 0.391, sum = 1.562805
    chain 0 domain 4: d0 0.382, d1 0.389, d2 0.380, d3 0.346, sum = 1.496765
    chain 0 domain 5: d0 0.387, d1 0.375, d2 0.404, d3 0.389, sum = 1.555115
    chain 0 domain 6: d0 0.384, d1 0.373, d2 0.381, d3 0.355, sum = 1.493958
    chain 0 domain 7: d0 0.388, d1 0.389, d2 0.365, d3 0.370, sum = 1.511719
    chain 0 domain 8: d0 0.386, d1 0.373, d2 0.366, d3 0.368, sum = 1.493652
    chain 0 domain 9: d0 0.386, d1 0.386, d2 0.364, d3 0.358, sum = 1.494385
    chain 0 domain 10: d0 0.382, d1 0.376, d2 0.390, d3 0.348, sum = 1.495667
    chain 0 domain 11: d0 0.391, d1 0.380, d2 0.384, d3 0.378, sum = 1.533325
    chain 0 domain 12: d0 0.375, d1 0.371, d2 0.372, d3 0.370, sum = 1.487854
    2021-05-25 14:16:40:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout.
    chain 1 domain 0: d0 0.399, d1 0.393, d2 0.396, d3 0.396, sum = 1.583313
    chain 1 domain 1: d0 0.407, d1 0.399, d2 0.401, d3 0.402, sum = 1.608459
    chain 1 domain 2: d0 0.416, d1 0.412, d2 0.414, d3 0.414, sum = 1.655212
    chain 1 domain 3: d0 0.415, d1 0.405, d2 0.411, d3 0.410, sum = 1.641052
    chain 1 domain 4: d0 0.419, d1 0.418, d2 0.418, d3 0.418, sum = 1.673279
    chain 1 domain 5: d0 0.413, d1 0.403, d2 0.405, d3 0.407, sum = 1.627869
    chain 1 domain 6: d0 0.392, d1 0.384, d2 0.384, d3 0.387, sum = 1.546875
    chain 1 domain 7: d0 0.356, d1 0.345, d2 0.348, d3 0.348, sum = 1.397705
    chain 1 domain 8: d0 0.325, d1 0.317, d2 0.319, d3 0.319, sum = 1.279968
    chain 1 domain 9: d0 0.350, d1 0.340, d2 0.340, d3 0.342, sum = 1.372070
    chain 1 domain 10: d0 0.368, d1 0.361, d2 0.361, d3 0.365, sum = 1.455383
    chain 1 domain 11: d0 0.386, d1 0.378, d2 0.381, d3 0.352, sum = 1.496460
    chain 1 domain 12: d0 0.397, d1 0.393, d2 0.394, d3 0.395, sum = 1.578918
    2021-05-25 14:16:40:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
    chain 2 domain 0: d0 0.393, d1 0.396, d2 0.410, d3 0.399, sum = 1.597778
    chain 2 domain 1: d0 0.394, d1 0.389, d2 0.387, d3 0.390, sum = 1.560059
    chain 2 domain 2: d0 0.391, d1 0.395, d2 0.390, d3 0.392, sum = 1.567444
    chain 2 domain 3: d0 0.402, d1 0.386, d2 0.407, d3 0.398, sum = 1.594055
    chain 2 domain 4: d0 0.386, d1 0.389, d2 0.385, d3 0.387, sum = 1.547241
    chain 2 domain 5: d0 0.387, d1 0.378, d2 0.382, d3 0.382, sum = 1.529175
    chain 2 domain 6: d0 0.387, d1 0.383, d2 0.380, d3 0.362, sum = 1.512085
    chain 2 domain 7: d0 0.385, d1 0.368, d2 0.385, d3 0.346, sum = 1.483887
    chain 2 domain 8: d0 0.367, d1 0.373, d2 0.354, d3 0.365, sum = 1.459351
    chain 2 domain 9: d0 0.381, d1 0.364, d2 0.366, d3 0.381, sum = 1.491333
    chain 2 domain 10: d0 0.381, d1 0.375, d2 0.401, d3 0.338, sum = 1.494629
    chain 2 domain 11: d0 0.388, d1 0.388, d2 0.380, d3 0.340, sum = 1.495422
    chain 2 domain 12: d0 0.376, d1 0.372, d2 0.369, d3 0.369, sum = 1.485840
    2021-05-25 14:16:40:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
    2021-05-25 14:16:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 63, chip_temp 44 ~ 92, now 419.5s, target 92.9
    2021-05-25 14:16:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 64, chip_temp 44 ~ 92, now 420.5s, target 93.1
    2021-05-25 14:16:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 64, chip_temp 44 ~ 93, now 421.5s, target 93.2
    2021-05-25 14:16:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 64, chip_temp 44 ~ 93, now 422.5s, target 93.4
    2021-05-25 14:16:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 64, chip_temp 44 ~ 93, now 423.5s, target 93.6
    2021-05-25 14:16:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 64, chip_temp 44 ~ 94, now 424.5s, target 93.7
    2021-05-25 14:16:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 94 > 93.7 target_temp.
    2021-05-25 14:16:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 65, chip_temp 44 ~ 96, now 430.5s, target 94.7
    2021-05-25 14:16:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 96 > 94.7 target_temp.
    2021-05-25 14:17:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 66, chip_temp 44 ~ 98, now 436.5s, target 95.7
    2021-05-25 14:17:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 98 > 95.7 target_temp.
    2021-05-25 14:17:04:thread.c:849:check_temperature: over max temp, pcb temp 67 (max 80), chip temp 99(max 98)
    2021-05-25 14:17:04:driver-btm-api.c:247:set_miner_status: ERROR_TEMP_TOO_HIGH
    2021-05-25 14:17:04:driver-btm-api.c:176:stop_mining: stop mining: over max temp
    2021-05-25 14:17:04:thread.c:1575:cancel_temperature_monitor_thread: cancel thread
    2021-05-25 14:17:04:thread.c:1595:cancel_read_nonce_reg_thread: cancel thread
    2021-05-25 14:17:04:thread.c:1631:cancel_bitmain_soc_init_thread: cancel thread
    2021-05-25 14:17:04:driver-btm-api.c:147:killall_hashboard: ****power off hashboard****

    0
    评论操作 固定链接

    I upgraded last farimware
    Room temp is 20~ 30

    0
    评论操作 固定链接

    Dear

    Could you also try to clean the dudt for the antminer firstly ?

    0
    评论操作 固定链接

    Dear

    Could you also try to clean the dust for the antminer firstly ?

    How To Clean and Dust The Antminers https://support.bitmain.com/hc/en-us/articles/115004520173-How-To-Clean-and-Dust-The-Antminers

    0
    评论操作 固定链接

    This can be a temperature sensor problem, if you have the knowledge you can try to replace it. I had this issue with another model and fixed after replacing the t541 temperature sensor chip

    0
    评论操作 固定链接

请先登录再写评论。