Received repaired hashboards and control board today, but it does not work. what did you do? where is my money for repair fee, shipping cost, and non mining the time?
已回答
I really disappointed with your service to repair, it is even second time for me from S19 PSU. actually same and more. ;(
1. control board
- Not flashed right version of the image, I tried to update by SD, flicking is over 1hour. could not be updated.
2. Hashboard, checked by other S17e's control board.
- not fixed the original problem, 0 asic found.
- Mixed hashboard, I sent two defected hashboards to repair, the version is v1.3, but I checked what I received from bitmain repair center, its version is v1.4. so surely not match the ID between three hashboard, stopped working. at least you should make a same ID on the board.
Thanks for your very kindly service, BITMAIN. you don't want to ask any request after sales.
-
正式评论
Dear
We checked the hashboard can not be detected
For the hashboard which can not be detected ,please try to exclude the issues by the below instructions
1.check the wires for the hashboard--pull them and re-plug them again, and also you can try to change the new wires
2.upgrade to the latest firmware
3. change the PSU to try it and reset the miner to the factory settings
4.flash the SD card program to recover the control board
Please download the SD card file in the below linkhttps://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image
评论操作 -
this is fucking mixed hashboard kernel log
--------------------------------------------------------------------------------------
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203428K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25948K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12908K (cce65000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
nand: Macronix MX30LF2GE8AB
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x00000ff60000
nand_read_bbt: bad block at 0x00000ff80000
nand_read_bbt: bad block at 0x00000ffa0000
nand_read_bbt: bad block at 0x00000ffc0000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 512 (aligned 512), data offset: 2048
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 8/3, WL threshold: 4096, image sequence number: 1567270514
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 47B540C7-9D9A-47A8-BA37-D4081EFEDE2D, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi1: VID header offset: 512 (aligned 512), data offset: 2048
ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 1022/172, WL threshold: 4096, image sequence number: 1198263195
ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8D25A753-B1E6-461F-BA97-EE4B6F2054F5, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb40000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
2021-05-18 11:59:14 driver-btm-api.c:486:init_freq_mode: This is scan-user version
2021-05-18 11:59:14 driver-btm-api.c:1784:bitmain_soc_init: Miner compile time: Sat Nov 2 00:57:07 CST 2019 type: Antminer S17e
2021-05-18 11:59:14 driver-btm-api.c:1785:bitmain_soc_init: commit version: 3658412 2019-11-01 22:33:08, build by: lol 2019-11-02 01:07:07
2021-05-18 11:59:14 driver-btm-api.c:1786:bitmain_soc_init: opt_multi_version = 1
2021-05-18 11:59:14 driver-btm-api.c:1787:bitmain_soc_init: opt_bitmain_ab = 1
2021-05-18 11:59:14 driver-btm-api.c:1788:bitmain_soc_init: mid_auto_gen = 0
2021-05-18 11:59:14 driver-btm-api.c:1789:bitmain_soc_init: opt_bitmain_work_mode = 0
2021-05-18 11:59:14 driver-btm-api.c:1628:show_sn: 8024744679104814Ğ%
2021-05-18 11:59:14 fan.c:248:front_fan_power_on: Note: front fan is power on!
2021-05-18 11:59:14 fan.c:260:rear_fan_power_on: Note: rear fan is power on!
2021-05-18 11:59:14 driver-btm-api.c:949:miner_device_init: Detect 256MB control board of XILINX
2021-05-18 11:59:14 driver-btm-api.c:897:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2021-05-18 11:59:14 thread.c:705:create_read_nonce_reg_thread: create thread
2021-05-18 11:59:20 driver-btm-api.c:881:init_miner_version: miner ID : 8024744679104814
2021-05-18 11:59:20 driver-btm-api.c:887:init_miner_version: FPGA Version = 0xB023
2021-05-18 11:59:21 [chain 0]
0x0000 96 13 01 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0010 00 00 00 00 00 00 00 00 03 01 00 01 00 FF 5A 5A
0x0020 5A 5A 5A 5A 5A 5A 87 AF 96 13 58 50 52 58 58 52
0x0030 50 58 56 58 58 50 56 52 58 52 58 50 56 52 50 50
0x0040 58 52 58 58 58 58 58 58 50 58 56 50 52 52 58 50
0x0050 52 58 52 56 58 50 58 58 58 50 56 52 58 50 52 58
0x0060 58 50 56 58 52 52 50 58 58 52 58 56 50 50 58 52
0x0070 58 58 58 56 58 58 52 50 52 50 58 58 52 58 52 56
0x0080 58 58 50 50 58 58 58 58 50 50 52 56 52 58 50 50
0x0090 58 58 52 52 58 56 50 52 58 58 58 50 56 52 58 56
0x00A0 58 50 58 58 52 50 58 52 50 58 50 58 58 52 52 56
0x00B0 58 3A 07 48 55 00 00 00 00 01 00 FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 4D BC
2021-05-18 11:59:22 fixture_header : 0x1396
2021-05-18 11:59:22 fixture_version : 0x0001
2021-05-18 11:59:22 hash_board_sn :
2021-05-18 11:59:22 pcb_version : 0x0103
2021-05-18 11:59:22 bom_version : 0x0100
2021-05-18 11:59:22 product_id : 0x00
2021-05-18 11:59:22 board_bin : 0xff
2021-05-18 11:59:22
2021-05-18 11:59:22 miner_header : 0x1396
2021-05-18 11:59:22 work_mode_count : 0x01
2021-05-18 11:59:22 miner_bin : 0x00
2021-05-18 11:59:22 [mode 0]
2021-05-18 11:59:22 voltage : 1850
2021-05-18 11:59:22 ideal_hash_rate : 21832
IC[000]:440 IC[001]:400 IC[002]:410 IC[003]:440 IC[004]:440 IC[005]:410 IC[006]:400 IC[007]:440 IC[008]:430
IC[009]:440 IC[010]:440 IC[011]:400 IC[012]:430 IC[013]:410 IC[014]:440 IC[015]:410 IC[016]:440 IC[017]:400
IC[018]:430 IC[019]:410 IC[020]:400 IC[021]:400 IC[022]:440 IC[023]:410 IC[024]:440 IC[025]:440 IC[026]:440
IC[027]:440 IC[028]:440 IC[029]:440 IC[030]:400 IC[031]:440 IC[032]:430 IC[033]:400 IC[034]:410 IC[035]:410
IC[036]:440 IC[037]:400 IC[038]:410 IC[039]:440 IC[040]:410 IC[041]:430 IC[042]:440 IC[043]:400 IC[044]:440
IC[045]:440 IC[046]:440 IC[047]:400 IC[048]:430 IC[049]:410 IC[050]:440 IC[051]:400 IC[052]:410 IC[053]:440
IC[054]:440 IC[055]:400 IC[056]:430 IC[057]:440 IC[058]:410 IC[059]:410 IC[060]:400 IC[061]:440 IC[062]:440
IC[063]:410 IC[064]:440 IC[065]:430 IC[066]:400 IC[067]:400 IC[068]:440 IC[069]:410 IC[070]:440 IC[071]:440
IC[072]:440 IC[073]:430 IC[074]:440 IC[075]:440 IC[076]:410 IC[077]:400 IC[078]:410 IC[079]:400 IC[080]:440
IC[081]:440 IC[082]:410 IC[083]:440 IC[084]:410 IC[085]:430 IC[086]:440 IC[087]:440 IC[088]:400 IC[089]:400
IC[090]:440 IC[091]:440 IC[092]:440 IC[093]:440 IC[094]:400 IC[095]:400 IC[096]:410 IC[097]:430 IC[098]:410
IC[099]:440 IC[100]:400 IC[101]:400 IC[102]:440 IC[103]:440 IC[104]:410 IC[105]:410 IC[106]:440 IC[107]:430
IC[108]:400 IC[109]:410 IC[110]:440 IC[111]:440 IC[112]:440 IC[113]:400 IC[114]:430 IC[115]:410 IC[116]:440
IC[117]:430 IC[118]:440 IC[119]:400 IC[120]:440 IC[121]:440 IC[122]:410 IC[123]:400 IC[124]:440 IC[125]:410
IC[126]:400 IC[127]:440 IC[128]:400 IC[129]:440 IC[130]:440 IC[131]:410 IC[132]:410 IC[133]:430 IC[134]:440
2021-05-18 11:59:23 [chain 1]
0x0000 96 13 01 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0010 00 00 00 00 00 00 00 00 03 01 00 01 00 FF 5A 5A
0x0020 5A 5A 5A 5A 5A 5A 87 AF 96 13 4C 4C 4C 4C 4C 4C
0x0030 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x0040 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x0050 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x0060 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x0070 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x0080 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x0090 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x00A0 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x00B0 4C 6C 07 75 4C 00 00 00 00 01 00 FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 45 04
2021-05-18 11:59:23 fixture_header : 0x1396
2021-05-18 11:59:23 fixture_version : 0x0001
2021-05-18 11:59:23 hash_board_sn :
2021-05-18 11:59:23 pcb_version : 0x0103
2021-05-18 11:59:23 bom_version : 0x0100
2021-05-18 11:59:23 product_id : 0x00
2021-05-18 11:59:23 board_bin : 0xff
2021-05-18 11:59:23
2021-05-18 11:59:23 miner_header : 0x1396
2021-05-18 11:59:23 work_mode_count : 0x01
2021-05-18 11:59:23 miner_bin : 0x00
2021-05-18 11:59:23 [mode 0]
2021-05-18 11:59:23 voltage : 1900
2021-05-18 11:59:23 ideal_hash_rate : 19573
IC[000]:380 IC[001]:380 IC[002]:380 IC[003]:380 IC[004]:380 IC[005]:380 IC[006]:380 IC[007]:380 IC[008]:380
IC[009]:380 IC[010]:380 IC[011]:380 IC[012]:380 IC[013]:380 IC[014]:380 IC[015]:380 IC[016]:380 IC[017]:380
IC[018]:380 IC[019]:380 IC[020]:380 IC[021]:380 IC[022]:380 IC[023]:380 IC[024]:380 IC[025]:380 IC[026]:380
IC[027]:380 IC[028]:380 IC[029]:380 IC[030]:380 IC[031]:380 IC[032]:380 IC[033]:380 IC[034]:380 IC[035]:380
IC[036]:380 IC[037]:380 IC[038]:380 IC[039]:380 IC[040]:380 IC[041]:380 IC[042]:380 IC[043]:380 IC[044]:380
IC[045]:380 IC[046]:380 IC[047]:380 IC[048]:380 IC[049]:380 IC[050]:380 IC[051]:380 IC[052]:380 IC[053]:380
IC[054]:380 IC[055]:380 IC[056]:380 IC[057]:380 IC[058]:380 IC[059]:380 IC[060]:380 IC[061]:380 IC[062]:380
IC[063]:380 IC[064]:380 IC[065]:380 IC[066]:380 IC[067]:380 IC[068]:380 IC[069]:380 IC[070]:380 IC[071]:380
IC[072]:380 IC[073]:380 IC[074]:380 IC[075]:380 IC[076]:380 IC[077]:380 IC[078]:380 IC[079]:380 IC[080]:380
IC[081]:380 IC[082]:380 IC[083]:380 IC[084]:380 IC[085]:380 IC[086]:380 IC[087]:380 IC[088]:380 IC[089]:380
IC[090]:380 IC[091]:380 IC[092]:380 IC[093]:380 IC[094]:380 IC[095]:380 IC[096]:380 IC[097]:380 IC[098]:380
IC[099]:380 IC[100]:380 IC[101]:380 IC[102]:380 IC[103]:380 IC[104]:380 IC[105]:380 IC[106]:380 IC[107]:380
IC[108]:380 IC[109]:380 IC[110]:380 IC[111]:380 IC[112]:380 IC[113]:380 IC[114]:380 IC[115]:380 IC[116]:380
IC[117]:380 IC[118]:380 IC[119]:380 IC[120]:380 IC[121]:380 IC[122]:380 IC[123]:380 IC[124]:380 IC[125]:380
IC[126]:380 IC[127]:380 IC[128]:380 IC[129]:380 IC[130]:380 IC[131]:380 IC[132]:380 IC[133]:380 IC[134]:380
2021-05-18 11:59:25 [chain 2]
0x0000 96 13 01 00 59 44 46 54 59 48 36 41 49 41 41 4A
0x0010 42 30 4B 31 59 00 00 00 28 01 00 01 01 01 01 04
0x0020 04 41 42 5A 5A 5A FC 88 96 13 53 53 57 57 51 53
0x0030 57 51 51 51 53 57 57 51 53 53 57 51 53 51 53 57
0x0040 53 57 51 57 51 51 51 53 51 57 53 57 53 57 57 57
0x0050 51 53 57 51 51 53 53 51 53 51 57 57 53 51 53 57
0x0060 51 53 53 51 51 53 57 57 57 57 51 53 53 51 57 57
0x0070 53 51 53 57 57 51 53 51 53 51 57 57 53 51 53 51
0x0080 53 57 51 57 53 53 57 51 51 51 57 53 57 53 57 51
0x0090 51 53 51 53 57 57 57 53 51 53 51 57 53 57 51 57
0x00A0 53 51 53 57 51 57 53 51 51 57 51 53 51 57 53 53
0x00B0 57 3A 07 20 54 00 00 00 00 01 00 FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 56 83
2021-05-18 11:59:25 fixture_header : 0x1396
2021-05-18 11:59:25 fixture_version : 0x0001
2021-05-18 11:59:25 hash_board_sn : YDFTYH6AIAAJB0K1Y
2021-05-18 11:59:25 pcb_version : 0x0128
2021-05-18 11:59:25 bom_version : 0x0100
2021-05-18 11:59:25 product_id : 0x01
2021-05-18 11:59:25 board_bin : 0x01
2021-05-18 11:59:25
2021-05-18 11:59:25 miner_header : 0x1396
2021-05-18 11:59:25 work_mode_count : 0x01
2021-05-18 11:59:25 miner_bin : 0x00
2021-05-18 11:59:25 [mode 0]
2021-05-18 11:59:25 voltage : 1850
2021-05-18 11:59:25 ideal_hash_rate : 21536
IC[000]:415 IC[001]:415 IC[002]:435 IC[003]:435 IC[004]:405 IC[005]:415 IC[006]:435 IC[007]:405 IC[008]:405
IC[009]:405 IC[010]:415 IC[011]:435 IC[012]:435 IC[013]:405 IC[014]:415 IC[015]:415 IC[016]:435 IC[017]:405
IC[018]:415 IC[019]:405 IC[020]:415 IC[021]:435 IC[022]:415 IC[023]:435 IC[024]:405 IC[025]:435 IC[026]:405
IC[027]:405 IC[028]:405 IC[029]:415 IC[030]:405 IC[031]:435 IC[032]:415 IC[033]:435 IC[034]:415 IC[035]:435
IC[036]:435 IC[037]:435 IC[038]:405 IC[039]:415 IC[040]:435 IC[041]:405 IC[042]:405 IC[043]:415 IC[044]:415
IC[045]:405 IC[046]:415 IC[047]:405 IC[048]:435 IC[049]:435 IC[050]:415 IC[051]:405 IC[052]:415 IC[053]:435
IC[054]:405 IC[055]:415 IC[056]:415 IC[057]:405 IC[058]:405 IC[059]:415 IC[060]:435 IC[061]:435 IC[062]:435
IC[063]:435 IC[064]:405 IC[065]:415 IC[066]:415 IC[067]:405 IC[068]:435 IC[069]:435 IC[070]:415 IC[071]:405
IC[072]:415 IC[073]:435 IC[074]:435 IC[075]:405 IC[076]:415 IC[077]:405 IC[078]:415 IC[079]:405 IC[080]:435
IC[081]:435 IC[082]:415 IC[083]:405 IC[084]:415 IC[085]:405 IC[086]:415 IC[087]:435 IC[088]:405 IC[089]:435
IC[090]:415 IC[091]:415 IC[092]:435 IC[093]:405 IC[094]:405 IC[095]:405 IC[096]:435 IC[097]:415 IC[098]:435
IC[099]:415 IC[100]:435 IC[101]:405 IC[102]:405 IC[103]:415 IC[104]:405 IC[105]:415 IC[106]:435 IC[107]:435
IC[108]:435 IC[109]:415 IC[110]:405 IC[111]:415 IC[112]:405 IC[113]:435 IC[114]:415 IC[115]:435 IC[116]:405
IC[117]:435 IC[118]:415 IC[119]:405 IC[120]:415 IC[121]:435 IC[122]:405 IC[123]:435 IC[124]:415 IC[125]:405
IC[126]:405 IC[127]:435 IC[128]:405 IC[129]:415 IC[130]:405 IC[131]:435 IC[132]:415 IC[133]:415 IC[134]:435
2021-05-18 11:59:25 driver-btm-api.c:522:get_product_id: product_id[0] = 0
2021-05-18 11:59:25 driver-btm-api.c:522:get_product_id: product_id[1] = 0
2021-05-18 11:59:25 driver-btm-api.c:522:get_product_id: product_id[2] = 1
2021-05-18 11:59:25 driver-btm-api.c:534:get_product_id: Product id are different.
2021-05-18 11:59:25 sweep_err.c:84:sweep_set_error_code: Sweep error string = P:4.
2021-05-18 11:59:25 driver-btm-api.c:1721:bitmain_board_init: product id is invalid
2021-05-18 11:59:25 driver-btm-api.c:186:set_miner_status: ERROR_SOC_INIT
2021-05-18 11:59:25 driver-btm-api.c:127:stop_mining: stop mining: soc init failed!
2021-05-18 11:59:25 thread.c:750:cancel_read_nonce_reg_thread: cancel thread
2021-05-18 11:59:25 driver-btm-api.c:112:killall_hashboard: ****power off hashboard****
2021-05-18 11:59:50 power_api.c:231:power_off: init gpio907
-
This is also fucking not solved 0 asic problem
-------------------------------------------------------------------------------------
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203428K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25948K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12908K (cce65000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
nand: Macronix MX30LF2GE8AB
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x00000ff60000
nand_read_bbt: bad block at 0x00000ff80000
nand_read_bbt: bad block at 0x00000ffa0000
nand_read_bbt: bad block at 0x00000ffc0000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 512 (aligned 512), data offset: 2048
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 1567270514
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 47B540C7-9D9A-47A8-BA37-D4081EFEDE2D, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi1: VID header offset: 512 (aligned 512), data offset: 2048
ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 1022/172, WL threshold: 4096, image sequence number: 1198263195
ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8D25A753-B1E6-461F-BA97-EE4B6F2054F5, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb40000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
2021-05-18 11:54:55 driver-btm-api.c:486:init_freq_mode: This is scan-user version
2021-05-18 11:54:55 driver-btm-api.c:1784:bitmain_soc_init: Miner compile time: Sat Nov 2 00:57:07 CST 2019 type: Antminer S17e
2021-05-18 11:54:55 driver-btm-api.c:1785:bitmain_soc_init: commit version: 3658412 2019-11-01 22:33:08, build by: lol 2019-11-02 01:07:07
2021-05-18 11:54:55 driver-btm-api.c:1786:bitmain_soc_init: opt_multi_version = 1
2021-05-18 11:54:55 driver-btm-api.c:1787:bitmain_soc_init: opt_bitmain_ab = 1
2021-05-18 11:54:55 driver-btm-api.c:1788:bitmain_soc_init: mid_auto_gen = 0
2021-05-18 11:54:55 driver-btm-api.c:1789:bitmain_soc_init: opt_bitmain_work_mode = 0
2021-05-18 11:54:55 driver-btm-api.c:1628:show_sn: 8024744679104814Ğ%
2021-05-18 11:54:55 fan.c:248:front_fan_power_on: Note: front fan is power on!
2021-05-18 11:54:55 fan.c:260:rear_fan_power_on: Note: rear fan is power on!
2021-05-18 11:54:55 driver-btm-api.c:949:miner_device_init: Detect 256MB control board of XILINX
2021-05-18 11:54:55 driver-btm-api.c:897:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2021-05-18 11:54:55 thread.c:705:create_read_nonce_reg_thread: create thread
2021-05-18 11:55:01 driver-btm-api.c:881:init_miner_version: miner ID : 8024744679104814
2021-05-18 11:55:01 driver-btm-api.c:887:init_miner_version: FPGA Version = 0xB023
2021-05-18 11:55:03 [chain 0]
0x0000 96 13 01 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0010 00 00 00 00 00 00 00 00 03 01 00 01 00 FF 5A 5A
0x0020 5A 5A 5A 5A 5A 5A 87 AF 96 13 58 50 52 58 58 52
0x0030 50 58 56 58 58 50 56 52 58 52 58 50 56 52 50 50
0x0040 58 52 58 58 58 58 58 58 50 58 56 50 52 52 58 50
0x0050 52 58 52 56 58 50 58 58 58 50 56 52 58 50 52 58
0x0060 58 50 56 58 52 52 50 58 58 52 58 56 50 50 58 52
0x0070 58 58 58 56 58 58 52 50 52 50 58 58 52 58 52 56
0x0080 58 58 50 50 58 58 58 58 50 50 52 56 52 58 50 50
0x0090 58 58 52 52 58 56 50 52 58 58 58 50 56 52 58 56
0x00A0 58 50 58 58 52 50 58 52 50 58 50 58 58 52 52 56
0x00B0 58 3A 07 48 55 00 00 00 00 01 00 FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 4D BC
2021-05-18 11:55:03 fixture_header : 0x1396
2021-05-18 11:55:03 fixture_version : 0x0001
2021-05-18 11:55:03 hash_board_sn :
2021-05-18 11:55:03 pcb_version : 0x0103
2021-05-18 11:55:03 bom_version : 0x0100
2021-05-18 11:55:03 product_id : 0x00
2021-05-18 11:55:03 board_bin : 0xff
2021-05-18 11:55:03
2021-05-18 11:55:03 miner_header : 0x1396
2021-05-18 11:55:03 work_mode_count : 0x01
2021-05-18 11:55:03 miner_bin : 0x00
2021-05-18 11:55:03 [mode 0]
2021-05-18 11:55:03 voltage : 1850
2021-05-18 11:55:03 ideal_hash_rate : 21832
IC[000]:440 IC[001]:400 IC[002]:410 IC[003]:440 IC[004]:440 IC[005]:410 IC[006]:400 IC[007]:440 IC[008]:430
IC[009]:440 IC[010]:440 IC[011]:400 IC[012]:430 IC[013]:410 IC[014]:440 IC[015]:410 IC[016]:440 IC[017]:400
IC[018]:430 IC[019]:410 IC[020]:400 IC[021]:400 IC[022]:440 IC[023]:410 IC[024]:440 IC[025]:440 IC[026]:440
IC[027]:440 IC[028]:440 IC[029]:440 IC[030]:400 IC[031]:440 IC[032]:430 IC[033]:400 IC[034]:410 IC[035]:410
IC[036]:440 IC[037]:400 IC[038]:410 IC[039]:440 IC[040]:410 IC[041]:430 IC[042]:440 IC[043]:400 IC[044]:440
IC[045]:440 IC[046]:440 IC[047]:400 IC[048]:430 IC[049]:410 IC[050]:440 IC[051]:400 IC[052]:410 IC[053]:440
IC[054]:440 IC[055]:400 IC[056]:430 IC[057]:440 IC[058]:410 IC[059]:410 IC[060]:400 IC[061]:440 IC[062]:440
IC[063]:410 IC[064]:440 IC[065]:430 IC[066]:400 IC[067]:400 IC[068]:440 IC[069]:410 IC[070]:440 IC[071]:440
IC[072]:440 IC[073]:430 IC[074]:440 IC[075]:440 IC[076]:410 IC[077]:400 IC[078]:410 IC[079]:400 IC[080]:440
IC[081]:440 IC[082]:410 IC[083]:440 IC[084]:410 IC[085]:430 IC[086]:440 IC[087]:440 IC[088]:400 IC[089]:400
IC[090]:440 IC[091]:440 IC[092]:440 IC[093]:440 IC[094]:400 IC[095]:400 IC[096]:410 IC[097]:430 IC[098]:410
IC[099]:440 IC[100]:400 IC[101]:400 IC[102]:440 IC[103]:440 IC[104]:410 IC[105]:410 IC[106]:440 IC[107]:430
IC[108]:400 IC[109]:410 IC[110]:440 IC[111]:440 IC[112]:440 IC[113]:400 IC[114]:430 IC[115]:410 IC[116]:440
IC[117]:430 IC[118]:440 IC[119]:400 IC[120]:440 IC[121]:440 IC[122]:410 IC[123]:400 IC[124]:440 IC[125]:410
IC[126]:400 IC[127]:440 IC[128]:400 IC[129]:440 IC[130]:440 IC[131]:410 IC[132]:410 IC[133]:430 IC[134]:440
2021-05-18 11:55:05 [chain 1]
0x0000 96 13 01 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0010 00 00 00 00 00 00 00 00 03 01 00 01 00 FF 5A 5A
0x0020 5A 5A 5A 5A 5A 5A 87 AF 96 13 4C 4C 4C 4C 4C 4C
0x0030 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x0040 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x0050 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x0060 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x0070 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x0080 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x0090 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x00A0 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C 4C
0x00B0 4C 6C 07 75 4C 00 00 00 00 01 00 FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 45 04
2021-05-18 11:55:05 fixture_header : 0x1396
2021-05-18 11:55:05 fixture_version : 0x0001
2021-05-18 11:55:05 hash_board_sn :
2021-05-18 11:55:05 pcb_version : 0x0103
2021-05-18 11:55:05 bom_version : 0x0100
2021-05-18 11:55:05 product_id : 0x00
2021-05-18 11:55:05 board_bin : 0xff
2021-05-18 11:55:05
2021-05-18 11:55:05 miner_header : 0x1396
2021-05-18 11:55:05 work_mode_count : 0x01
2021-05-18 11:55:05 miner_bin : 0x00
2021-05-18 11:55:05 [mode 0]
2021-05-18 11:55:05 voltage : 1900
2021-05-18 11:55:05 ideal_hash_rate : 19573
IC[000]:380 IC[001]:380 IC[002]:380 IC[003]:380 IC[004]:380 IC[005]:380 IC[006]:380 IC[007]:380 IC[008]:380
IC[009]:380 IC[010]:380 IC[011]:380 IC[012]:380 IC[013]:380 IC[014]:380 IC[015]:380 IC[016]:380 IC[017]:380
IC[018]:380 IC[019]:380 IC[020]:380 IC[021]:380 IC[022]:380 IC[023]:380 IC[024]:380 IC[025]:380 IC[026]:380
IC[027]:380 IC[028]:380 IC[029]:380 IC[030]:380 IC[031]:380 IC[032]:380 IC[033]:380 IC[034]:380 IC[035]:380
IC[036]:380 IC[037]:380 IC[038]:380 IC[039]:380 IC[040]:380 IC[041]:380 IC[042]:380 IC[043]:380 IC[044]:380
IC[045]:380 IC[046]:380 IC[047]:380 IC[048]:380 IC[049]:380 IC[050]:380 IC[051]:380 IC[052]:380 IC[053]:380
IC[054]:380 IC[055]:380 IC[056]:380 IC[057]:380 IC[058]:380 IC[059]:380 IC[060]:380 IC[061]:380 IC[062]:380
IC[063]:380 IC[064]:380 IC[065]:380 IC[066]:380 IC[067]:380 IC[068]:380 IC[069]:380 IC[070]:380 IC[071]:380
IC[072]:380 IC[073]:380 IC[074]:380 IC[075]:380 IC[076]:380 IC[077]:380 IC[078]:380 IC[079]:380 IC[080]:380
IC[081]:380 IC[082]:380 IC[083]:380 IC[084]:380 IC[085]:380 IC[086]:380 IC[087]:380 IC[088]:380 IC[089]:380
IC[090]:380 IC[091]:380 IC[092]:380 IC[093]:380 IC[094]:380 IC[095]:380 IC[096]:380 IC[097]:380 IC[098]:380
IC[099]:380 IC[100]:380 IC[101]:380 IC[102]:380 IC[103]:380 IC[104]:380 IC[105]:380 IC[106]:380 IC[107]:380
IC[108]:380 IC[109]:380 IC[110]:380 IC[111]:380 IC[112]:380 IC[113]:380 IC[114]:380 IC[115]:380 IC[116]:380
IC[117]:380 IC[118]:380 IC[119]:380 IC[120]:380 IC[121]:380 IC[122]:380 IC[123]:380 IC[124]:380 IC[125]:380
IC[126]:380 IC[127]:380 IC[128]:380 IC[129]:380 IC[130]:380 IC[131]:380 IC[132]:380 IC[133]:380 IC[134]:380
2021-05-18 11:55:05 driver-btm-api.c:522:get_product_id: product_id[0] = 0
2021-05-18 11:55:05 driver-btm-api.c:522:get_product_id: product_id[1] = 0
2021-05-18 11:55:05 driver-btm-api.c:502:dump_pcb_bom_version: Chain [0] PCB Version: 0x0103
2021-05-18 11:55:05 driver-btm-api.c:503:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2021-05-18 11:55:05 driver-btm-api.c:502:dump_pcb_bom_version: Chain [1] PCB Version: 0x0103
2021-05-18 11:55:05 driver-btm-api.c:503:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2021-05-18 11:55:11 driver-btm-api.c:1735:bitmain_board_init: Fan check passed.
2021-05-18 11:55:12 board.c:48:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-05-18 11:55:14 board.c:60:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-05-18 11:55:15 board.c:48:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-05-18 11:55:17 board.c:60:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-05-18 11:55:17 thread.c:700:create_pic_heart_beat_thread: create thread
2021-05-18 11:55:19 power_api.c:243:power_init: power type version: 0x0042
2021-05-18 11:55:19 power_api.c:261:power_init: Power init:
2021-05-18 11:55:19 power_api.c:262:power_init: current_voltage_raw = 0
2021-05-18 11:55:19 power_api.c:263:power_init: highest_voltage_raw = 2000
2021-05-18 11:55:19 power_api.c:264:power_init: working_voltage_raw = 2000
2021-05-18 11:55:19 power_api.c:265:power_init: higher_voltage_raw = 1850
2021-05-18 11:55:19 power_api.c:266:power_init: check_asic_voltage_raw = 1800
2021-05-18 11:55:19 driver-btm-api.c:1745:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-05-18 11:55:19 power_api.c:231:power_off: init gpio907
2021-05-18 11:55:51 power_api.c:318:set_to_check_asic_voltage: Set to voltage raw 1800, one step.
2021-05-18 11:55:57 power_api.c:96:check_voltage: target_vol = 18.00, actural_vol = 19.79, more than 0.5v diff.
2021-05-18 11:56:03 power_api.c:96:check_voltage: target_vol = 18.00, actural_vol = 17.20, more than 0.5v diff.
2021-05-18 11:56:13 uart.c:69:set_baud: set UART baud to 115200
2021-05-18 11:56:20 driver-btm-api.c:794:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
2021-05-18 11:56:21 board.c:48:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-05-18 11:56:23 board.c:60:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-05-18 11:56:31 driver-btm-api.c:794:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
2021-05-18 11:56:32 board.c:48:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-05-18 11:56:34 board.c:60:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-05-18 11:56:41 driver-btm-api.c:794:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
2021-05-18 11:56:42 board.c:48:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-05-18 11:56:44 board.c:60:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-05-18 11:56:44 driver-btm-api.c:851:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
2021-05-18 11:56:52 driver-btm-api.c:794:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2021-05-18 11:56:53 board.c:48:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-05-18 11:56:55 board.c:60:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-05-18 11:57:02 driver-btm-api.c:794:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2021-05-18 11:57:03 board.c:48:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-05-18 11:57:05 board.c:60:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-05-18 11:57:12 driver-btm-api.c:794:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2021-05-18 11:57:13 board.c:48:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-05-18 11:57:15 board.c:60:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-05-18 11:57:15 driver-btm-api.c:851:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
-
This is ticket ID
Ticket ID: 03320210410224834181UQ6CtW720644
CompletedTime: 2021-04-10 22:48:34
Type: Repair Ticket
Item Information
PartsControl board S17e,T17e,S17+,T17+YDFTC52AIABBA001H -> issue is the boot is not completedx 1PartsHashboard S17eYDFTYH6AIAJCJ01WD / YDFTYH6AIAJCJ01WA / Issue is "find 0 asic"x 2 -
What the hell for review the kernel log?
Where is not connected the hash board from kernel log? did you find that exactly?
---------------------------------------------------------------------------------------------------------
2021-05-18 11:59:25 driver-btm-api.c:522:get_product_id: product_id[0] = 0
2021-05-18 11:59:25 driver-btm-api.c:522:get_product_id: product_id[1] = 0
2021-05-18 11:59:25 driver-btm-api.c:522:get_product_id: product_id[2] = 1
---------------------------------------------------------------------------------------------------------
2021-05-18 11:59:22 pcb_version : 0x0103
2021-05-18 11:59:22 bom_version : 0x0100
2021-05-18 11:59:23 pcb_version : 0x0103
2021-05-18 11:59:23 bom_version : 0x0100
2021-05-18 11:59:25 pcb_version : 0x0128
2021-05-18 11:59:25 bom_version : 0x0100
---------------------------------------------------------------------------
-
Dear
Our technical engineer checked there is hashboard can not be detected
For the hashboard which can not be detected ,please try to exclude the issues by the below instructions
1.check the wires for the hashboard--pull them and re-plug them again, and also you can try to change the new wires
2.upgrade to the latest firmware
3. change the PSU to try it and reset the miner to the factory settings
4.flash the SD card program to recover the control board
Please download the SD card file in the below linkhttps://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image
-
Hi
if can not be detected, how did I see the kernel log for three hashboard versions?
look at this! do not tell as a parrot.
---------------------------------------------------------------------------------------------------------
2021-05-18 11:59:25 driver-btm-api.c:522:get_product_id: product_id[0] = 0
2021-05-18 11:59:25 driver-btm-api.c:522:get_product_id: product_id[1] = 0
2021-05-18 11:59:25 driver-btm-api.c:522:get_product_id: product_id[2] = 1
---------------------------------------------------------------------------------------------------------
2021-05-18 11:59:22 pcb_version : 0x0103
2021-05-18 11:59:22 bom_version : 0x0100
2021-05-18 11:59:23 pcb_version : 0x0103
2021-05-18 11:59:23 bom_version : 0x0100
2021-05-18 11:59:25 pcb_version : 0x0128
2021-05-18 11:59:25 bom_version : 0x0100
---------------------------------------------------------------------------
-
Dear Ilsung Jung
for the repair shipment
In order to avoid the further loss in mining due to the long repair period, we may return to the customer a previously repaired replacement of the same type in exchange for the returned products..
It is possible that you will receive a repaired product that is not original but works well.
For the repaired product, we provide a 30-day warranty starting from the first shipping date. If the product is defective within 30 days, please send it back and we will compensate you the return shipping fee with a coupon that can use to buy products on our website. We will send another replacement to you.
Thank you for your understanding.
请先登录再写评论。
评论
10 条评论