T15 - removed chain 1 due to asic num error

已回答

2021年02月01日 23:45

Hash board is not finding asic chips. error

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 197340K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32036K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 18996K (cc873000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 13/5, WL threshold: 4096, image sequence number: 2123913862
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID AC20C61D-0126-44F7-9CC0-A0CA8298D60D, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 792/417, WL threshold: 4096, image sequence number: 1543216332
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 6BC672D6-C941-491B-B0FB-1BD29238D398, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab01b
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
[2021-02-01 23:27:53.481] start listen on 6060 ...
[2021-02-01 23:36:11.665] set_start_time_point total_tv_start_sys=2968 total_tv_end_sys=2969

2021-02-01 23:27:23 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2021-02-01 23:27:23 driver-btm-soc.c:8125:bitmain_soc_init: T15
2021-02-01 23:27:23 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2021-02-01 23:27:23 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2021-02-01 23:27:23 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2021-02-01 23:27:23 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2021-02-01 23:27:23 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2021-02-01 23:27:23 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2021-02-01 23:27:23 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:46:16 CST 2019 type: Antminer T15
2021-02-01 23:27:23 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:53:57
2021-02-01 23:27:23 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2021-02-01 23:27:25 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 814c1d0a5c20881c
2021-02-01 23:27:25 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B
2021-02-01 23:27:25 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0x7
2021-02-01 23:27:25 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2021-02-01 23:27:25 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist
2021-02-01 23:27:25 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist
2021-02-01 23:27:33 eeprom.c:1418:eeprom_load: done
2021-02-01 23:27:33 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0101
2021-02-01 23:27:33 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0100
2021-02-01 23:27:33 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0101
2021-02-01 23:27:33 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0100
2021-02-01 23:27:33 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0101
2021-02-01 23:27:33 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0100
2021-02-01 23:27:33 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2021-02-01 23:27:38 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2021-02-01 23:27:38 dspic33ep16gs202.c:538:reset_pic: chain[1] ok
2021-02-01 23:27:43 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok
2021-02-01 23:27:44 dspic33ep16gs202.c:538:reset_pic: chain[2] ok
2021-02-01 23:27:48 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[2] ok
2021-02-01 23:27:48 power.c:137:power_init: power init ...
2021-02-01 23:27:48 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 2
2021-02-01 23:27:48 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 1
2021-02-01 23:27:48 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 0
2021-02-01 23:27:50 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-02-01 23:27:51 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2021-02-01 23:27:51 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!
2021-02-01 23:27:54 driver-btm-soc.c:8241:bitmain_soc_init: Enter 30s sleep to make sure power release finish.
2021-02-01 23:28:24 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[0] = 19.300000
2021-02-01 23:28:24 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[1] = 19.300000
2021-02-01 23:28:24 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[2] = 19.300000
2021-02-01 23:28:24 driver-btm-soc.c:7630:set_working_voltage_by_eeprom: max = 19.30, min = 19.30
2021-02-01 23:28:24 power.c:149:set_working_voltage: working_voltage = 19.300000
2021-02-01 23:28:24 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-02-01 23:28:25 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2021-02-01 23:28:25 eeprom.c:840:travel_eeprom_store: chain[0] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:440 IC[001]:440 IC[002]:425 IC[003]:425 IC[004]:440
IC[005]:440 IC[006]:425 IC[007]:425 IC[008]:440 IC[009]:440
IC[010]:440 IC[011]:440 IC[012]:425 IC[013]:440 IC[014]:425
IC[015]:425 IC[016]:425 IC[017]:440 IC[018]:440 IC[019]:440
IC[020]:425 IC[021]:425 IC[022]:440 IC[023]:440 IC[024]:440
IC[025]:425 IC[026]:440 IC[027]:440 IC[028]:425 IC[029]:440
IC[030]:440 IC[031]:440 IC[032]:425 IC[033]:440 IC[034]:425
IC[035]:440 IC[036]:440 IC[037]:425 IC[038]:440 IC[039]:425
IC[040]:440 IC[041]:440 IC[042]:440 IC[043]:425 IC[044]:425
IC[045]:425 IC[046]:440 IC[047]:425 IC[048]:440 IC[049]:440
IC[050]:440 IC[051]:440 IC[052]:440 IC[053]:425 IC[054]:425
IC[055]:425 IC[056]:425 IC[057]:440 IC[058]:440 IC[059]:440
voltage: 18.60 V
hash rate: 06623 GH/s

freq data per ASIC in mode2:
IC[000]:500 IC[001]:500 IC[002]:500 IC[003]:470 IC[004]:500
IC[005]:500 IC[006]:470 IC[007]:500 IC[008]:500 IC[009]:500
IC[010]:500 IC[011]:500 IC[012]:500 IC[013]:500 IC[014]:470
IC[015]:470 IC[016]:500 IC[017]:500 IC[018]:500 IC[019]:500
IC[020]:500 IC[021]:470 IC[022]:500 IC[023]:500 IC[024]:500
IC[025]:500 IC[026]:500 IC[027]:500 IC[028]:470 IC[029]:500
IC[030]:500 IC[031]:500 IC[032]:500 IC[033]:500 IC[034]:470
IC[035]:500 IC[036]:500 IC[037]:470 IC[038]:500 IC[039]:500
IC[040]:500 IC[041]:500 IC[042]:500 IC[043]:500 IC[044]:470
IC[045]:470 IC[046]:500 IC[047]:500 IC[048]:500 IC[049]:500
IC[050]:500 IC[051]:500 IC[052]:500 IC[053]:500 IC[054]:470
IC[055]:500 IC[056]:470 IC[057]:500 IC[058]:500 IC[059]:500
voltage in mode2: 19.30 V
hash rate in mode2: 07578 GH/s

2021-02-01 23:28:25 eeprom.c:840:travel_eeprom_store: chain[1] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:440 IC[001]:440 IC[002]:425 IC[003]:440 IC[004]:440
IC[005]:425 IC[006]:440 IC[007]:440 IC[008]:440 IC[009]:440
IC[010]:440 IC[011]:425 IC[012]:440 IC[013]:440 IC[014]:440
IC[015]:440 IC[016]:425 IC[017]:440 IC[018]:440 IC[019]:440
IC[020]:440 IC[021]:440 IC[022]:440 IC[023]:440 IC[024]:425
IC[025]:440 IC[026]:440 IC[027]:425 IC[028]:440 IC[029]:440
IC[030]:440 IC[031]:425 IC[032]:440 IC[033]:440 IC[034]:440
IC[035]:425 IC[036]:440 IC[037]:440 IC[038]:440 IC[039]:440
IC[040]:440 IC[041]:440 IC[042]:425 IC[043]:440 IC[044]:440
IC[045]:425 IC[046]:440 IC[047]:440 IC[048]:440 IC[049]:440
IC[050]:440 IC[051]:440 IC[052]:440 IC[053]:440 IC[054]:425
IC[055]:440 IC[056]:425 IC[057]:440 IC[058]:440 IC[059]:440
voltage: 18.60 V
hash rate: 06672 GH/s

freq data per ASIC in mode2:
IC[000]:515 IC[001]:515 IC[002]:485 IC[003]:515 IC[004]:500
IC[005]:485 IC[006]:500 IC[007]:515 IC[008]:515 IC[009]:515
IC[010]:515 IC[011]:485 IC[012]:515 IC[013]:500 IC[014]:515
IC[015]:485 IC[016]:500 IC[017]:515 IC[018]:515 IC[019]:515
IC[020]:500 IC[021]:515 IC[022]:515 IC[023]:515 IC[024]:485
IC[025]:485 IC[026]:515 IC[027]:500 IC[028]:515 IC[029]:515
IC[030]:515 IC[031]:485 IC[032]:515 IC[033]:515 IC[034]:500
IC[035]:485 IC[036]:500 IC[037]:515 IC[038]:515 IC[039]:515
IC[040]:515 IC[041]:500 IC[042]:485 IC[043]:515 IC[044]:515
IC[045]:485 IC[046]:500 IC[047]:515 IC[048]:515 IC[049]:515
IC[050]:515 IC[051]:515 IC[052]:500 IC[053]:515 IC[054]:485
IC[055]:485 IC[056]:500 IC[057]:515 IC[058]:515 IC[059]:515
voltage in mode2: 19.30 V
hash rate in mode2: 07735 GH/s

2021-02-01 23:28:25 eeprom.c:840:travel_eeprom_store: chain[2] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:440 IC[001]:455 IC[002]:455 IC[003]:455 IC[004]:440
IC[005]:440 IC[006]:440 IC[007]:455 IC[008]:455 IC[009]:455
IC[010]:455 IC[011]:455 IC[012]:455 IC[013]:440 IC[014]:440
IC[015]:440 IC[016]:440 IC[017]:455 IC[018]:455 IC[019]:455
IC[020]:440 IC[021]:455 IC[022]:455 IC[023]:440 IC[024]:455
IC[025]:440 IC[026]:440 IC[027]:455 IC[028]:455 IC[029]:455
IC[030]:455 IC[031]:455 IC[032]:455 IC[033]:440 IC[034]:440
IC[035]:440 IC[036]:440 IC[037]:455 IC[038]:455 IC[039]:455
IC[040]:455 IC[041]:440 IC[042]:455 IC[043]:455 IC[044]:440
IC[045]:440 IC[046]:440 IC[047]:455 IC[048]:455 IC[049]:455
IC[050]:455 IC[051]:455 IC[052]:440 IC[053]:455 IC[054]:440
IC[055]:455 IC[056]:440 IC[057]:440 IC[058]:455 IC[059]:455
voltage: 18.60 V
hash rate: 06864 GH/s

freq data per ASIC in mode2:
IC[000]:515 IC[001]:515 IC[002]:515 IC[003]:515 IC[004]:500
IC[005]:515 IC[006]:500 IC[007]:515 IC[008]:515 IC[009]:515
IC[010]:515 IC[011]:515 IC[012]:515 IC[013]:500 IC[014]:515
IC[015]:500 IC[016]:515 IC[017]:515 IC[018]:515 IC[019]:515
IC[020]:500 IC[021]:515 IC[022]:515 IC[023]:515 IC[024]:515
IC[025]:515 IC[026]:500 IC[027]:515 IC[028]:515 IC[029]:515
IC[030]:515 IC[031]:515 IC[032]:515 IC[033]:515 IC[034]:500
IC[035]:500 IC[036]:515 IC[037]:515 IC[038]:515 IC[039]:515
IC[040]:515 IC[041]:515 IC[042]:515 IC[043]:515 IC[044]:500
IC[045]:500 IC[046]:515 IC[047]:515 IC[048]:515 IC[049]:515
IC[050]:515 IC[051]:515 IC[052]:500 IC[053]:515 IC[054]:515
IC[055]:515 IC[056]:500 IC[057]:515 IC[058]:515 IC[059]:515
voltage in mode2: 19.30 V
hash rate in mode2: 07820 GH/s

2021-02-01 23:28:26 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2021-02-01 23:28:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
2021-02-01 23:28:29 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:28:32 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-02-01 23:28:32 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2021-02-01 23:28:32 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:28:33 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-02-01 23:28:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:28:34 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-02-01 23:28:34 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:28:34 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-02-01 23:28:34 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:28:35 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-02-01 23:28:35 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
2021-02-01 23:28:38 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:28:42 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 60
2021-02-01 23:28:43 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1!
2021-02-01 23:28:43 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-02-01 23:28:46 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:28:49 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-02-01 23:28:49 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 1
2021-02-01 23:28:49 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:28:49 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:28:49 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:28:50 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:28:50 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:28:51 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:28:51 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:28:52 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:28:52 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-02-01 23:28:55 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:28:59 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2021-02-01 23:28:59 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 1
2021-02-01 23:28:59 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:29:00 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:29:00 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:29:02 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:29:02 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:29:03 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:29:03 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:29:05 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:29:05 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-02-01 23:29:08 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:29:12 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2021-02-01 23:29:12 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 1
2021-02-01 23:29:12 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:29:15 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:29:15 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:29:18 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:29:18 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:29:21 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:29:21 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:29:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:29:23 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-02-01 23:29:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:29:31 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2021-02-01 23:29:31 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [0] times, power off hash board and wait [30] sec
2021-02-01 23:29:31 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2021-02-01 23:30:01 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-02-01 23:30:01 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2021-02-01 23:30:02 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1!
2021-02-01 23:30:04 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2021-02-01 23:30:04 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 1
2021-02-01 23:30:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:30:05 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:30:05 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:30:06 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:30:06 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:30:06 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:30:06 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:30:07 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:30:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-02-01 23:30:10 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:30:14 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2021-02-01 23:30:14 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 1
2021-02-01 23:30:14 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:30:16 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:30:16 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:30:17 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:30:17 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:30:19 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:30:19 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:30:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:30:20 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-02-01 23:30:23 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:30:27 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2021-02-01 23:30:27 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 1
2021-02-01 23:30:27 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:30:30 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:30:30 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:30:33 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:30:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:30:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:30:36 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:30:39 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:30:39 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-02-01 23:30:42 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:30:46 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2021-02-01 23:30:46 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [1] times, power off hash board and wait [30] sec
2021-02-01 23:30:47 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2021-02-01 23:31:17 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-02-01 23:31:17 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2021-02-01 23:31:18 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1!
2021-02-01 23:31:20 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 2
2021-02-01 23:31:20 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 1
2021-02-01 23:31:20 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:31:21 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:31:21 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:31:21 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:31:21 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:31:22 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:31:22 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:31:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:31:23 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-02-01 23:31:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:31:30 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2021-02-01 23:31:30 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 1
2021-02-01 23:31:30 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:31:31 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:31:31 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:31:33 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:31:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:31:34 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:31:34 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:31:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:31:36 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-02-01 23:31:39 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:31:43 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2021-02-01 23:31:43 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 1
2021-02-01 23:31:43 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:31:46 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:31:46 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:31:49 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:31:49 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:31:52 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:31:52 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:31:55 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:31:55 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-02-01 23:31:58 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:32:02 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2021-02-01 23:32:02 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [2] times, power off hash board and wait [30] sec
2021-02-01 23:32:03 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2021-02-01 23:32:33 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-02-01 23:32:33 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2021-02-01 23:32:34 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1!
2021-02-01 23:32:36 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 3
2021-02-01 23:32:36 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 1
2021-02-01 23:32:36 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:32:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:32:36 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:32:37 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:32:37 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:32:38 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:32:38 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:32:39 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:32:39 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-02-01 23:32:42 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:32:46 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2021-02-01 23:32:46 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 1
2021-02-01 23:32:46 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:32:47 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:32:47 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:32:49 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:32:49 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:32:50 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:32:50 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:32:52 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:32:52 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-02-01 23:32:55 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:32:59 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2021-02-01 23:32:59 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 1
2021-02-01 23:32:59 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:33:02 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:33:02 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:33:05 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:33:05 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:33:08 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:33:08 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:33:11 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-02-01 23:33:11 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-02-01 23:33:14 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:33:18 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2021-02-01 23:33:18 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [3] times, power off hash board and wait [30] sec
2021-02-01 23:33:18 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2021-02-01 23:33:48 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-02-01 23:33:49 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2021-02-01 23:33:50 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1!
2021-02-01 23:33:53 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2021-02-01 23:33:53 driver-btm-soc.c:7220:check_asic_num_by_force_open_core: removed chain 1 due to asic num error
2021-02-01 23:33:53 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2!
2021-02-01 23:33:53 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-02-01 23:33:56 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:33:59 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-02-01 23:33:59 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 2
2021-02-01 23:33:59 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:34:00 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-02-01 23:34:00 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:34:01 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-02-01 23:34:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:34:01 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-02-01 23:34:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:34:02 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-02-01 23:34:02 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-02-01 23:34:05 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:34:08 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 60
2021-02-01 23:34:08 driver-btm-soc.c:7238:balance_domain_voltage: To balance voltage domain, open all core and reset hash board after find asic num.
2021-02-01 23:34:08 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 0
2021-02-01 23:34:08 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:34:09 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-02-01 23:34:09 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
2021-02-01 23:34:12 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:34:15 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 2
2021-02-01 23:34:15 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:34:16 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-02-01 23:34:16 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-02-01 23:34:19 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:34:22 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 0
2021-02-01 23:34:22 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:34:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-02-01 23:34:23 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
2021-02-01 23:34:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:34:29 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 2
2021-02-01 23:34:29 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-02-01 23:34:31 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-02-01 23:34:31 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-02-01 23:34:34 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:34:37 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 0
2021-02-01 23:34:37 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:34:40 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-02-01 23:34:40 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
2021-02-01 23:34:43 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:34:46 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 2
2021-02-01 23:34:46 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-02-01 23:34:49 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-02-01 23:34:49 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-02-01 23:34:52 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-02-01 23:35:02 driver-btm-soc.c:7475:calculate_timeout: dev->timeout = 857
2021-02-01 23:35:02 driver-btm-soc.c:3012:set_baud: set baud=1
2021-02-01 23:35:02 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-02-01 23:35:02 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-02-01 23:35:02 driver-btm-soc.c:3023:set_baud: read bc write is 0x82001a
2021-02-01 23:35:02 driver-btm-soc.c:4076:set_clock_delay_control: core_data = 0x04
2021-02-01 23:35:02 driver-btm-soc.c:8293:bitmain_soc_init: Open 1/4 core for reading temperature.
2021-02-01 23:35:02 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-02-01 23:35:03 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-02-01 23:35:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-02-01 23:35:04 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-02-01 23:35:04 temperature.c:422:calibration_sensor_offset: chain[0] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 15 11 45 41 0 0 0 0
sensor offset: 0 0 0 0 0 0 0 0
2021-02-01 23:35:04 temperature.c:448:calibration_sensor_offset: chain[0] temp chip I2C addr=0x98
2021-02-01 23:35:04 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-02-01 23:35:04 temperature.c:531:calibration_sensor_offset: Warning: Chain[0] has no temp info ! we will fix it
2021-02-01 23:35:04 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093818, cmd_buf[1]=0x6131, cmd_buf[2]=0x2000000, misc=0x6131
2021-02-01 23:35:04 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[14]
2021-02-01 23:35:05 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[14] get middle temp offset=-5 typeID=55
2021-02-01 23:35:05 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092818, cmd_buf[1]=0x6131, cmd_buf[2]=0x1000000, misc=0x6131
2021-02-01 23:35:05 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[10]
2021-02-01 23:35:06 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[10] get middle temp offset=-5 typeID=55
2021-02-01 23:35:06 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109b018, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-02-01 23:35:06 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[44]
2021-02-01 23:35:07 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[44] get middle temp offset=-5 typeID=55
2021-02-01 23:35:07 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109a018, cmd_buf[1]=0x6131, cmd_buf[2]=0xa000000, misc=0x6131
2021-02-01 23:35:07 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[40]
2021-02-01 23:35:07 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[40] get middle temp offset=-5 typeID=55
2021-02-01 23:35:08 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-02-01 23:35:08 temperature.c:422:calibration_sensor_offset: chain[2] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 15 11 45 41 0 0 0 0
sensor offset: 0 0 0 0 0 0 0 0
2021-02-01 23:35:08 temperature.c:448:calibration_sensor_offset: chain[2] temp chip I2C addr=0x98
2021-02-01 23:35:08 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-02-01 23:35:08 temperature.c:531:calibration_sensor_offset: Warning: Chain[2] has no temp info ! we will fix it
2021-02-01 23:35:08 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093818, cmd_buf[1]=0x6131, cmd_buf[2]=0x2000000, misc=0x6131
2021-02-01 23:35:08 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[14]
2021-02-01 23:35:09 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[14] get middle temp offset=-5 typeID=55
2021-02-01 23:35:09 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092818, cmd_buf[1]=0x6131, cmd_buf[2]=0x1000000, misc=0x6131
2021-02-01 23:35:09 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[10]
2021-02-01 23:35:10 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[10] get middle temp offset=-5 typeID=55
2021-02-01 23:35:10 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109b018, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-02-01 23:35:10 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[44]
2021-02-01 23:35:11 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[44] get middle temp offset=-5 typeID=55
2021-02-01 23:35:11 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109a018, cmd_buf[1]=0x6131, cmd_buf[2]=0xa000000, misc=0x6131
2021-02-01 23:35:11 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[40]
2021-02-01 23:35:11 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[40] get middle temp offset=-5 typeID=55
2021-02-01 23:35:13 temperature.c:589:do_calibration_temperature_sensor: bring up lowest temperature is 32
ENV 32 FAN 4860
2021-02-01 23:35:18 driver-btm-soc.c:8298:bitmain_soc_init: Boot environment temperature is 32
2021-02-01 23:35:18 driver-btm-soc.c:8308:bitmain_soc_init: set TICKET_MASK
2021-02-01 23:35:18 driver-btm-soc.c:4130:open_core_bm1391: Start Open Core!!
2021-02-01 23:35:24 driver-btm-soc.c:4202:open_core_bm1391: End Open Core!!
2021-02-01 23:35:24 freq_tuning.c:312:freq_tuning_get_max_freq: Max freq of tuning is 550
ENV 32 FAN 4860
2021-02-01 23:35:24 power.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 19.30 ...
2021-02-01 23:35:24 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[24] = 19.887610
2021-02-01 23:35:24 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.000000
2021-02-01 23:35:25 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[31] = 19.770810
2021-02-01 23:35:25 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.887610
2021-02-01 23:35:26 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[38] = 19.654010
2021-02-01 23:35:26 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.770810
2021-02-01 23:35:27 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[45] = 19.537210
2021-02-01 23:35:27 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.654010
2021-02-01 23:35:28 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[52] = 19.420410
2021-02-01 23:35:28 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.537210
2021-02-01 23:35:29 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[54] = 19.387039
2021-02-01 23:35:29 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.420410
2021-02-01 23:35:30 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[56] = 19.353667
2021-02-01 23:35:30 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.387039
2021-02-01 23:35:31 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[58] = 19.320296
2021-02-01 23:35:31 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.353667
2021-02-01 23:35:32 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[59] = 19.303610
2021-02-01 23:35:32 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.320296
2021-02-01 23:35:33 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 0. to 470
2021-02-01 23:35:33 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 125.00M
2021-02-01 23:35:34 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 150.00M
2021-02-01 23:35:35 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 175.00M
2021-02-01 23:35:36 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 200.00M
2021-02-01 23:35:37 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 225.00M
2021-02-01 23:35:38 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 250.00M
2021-02-01 23:35:39 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 275.00M
2021-02-01 23:35:40 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 300.00M
2021-02-01 23:35:41 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 325.00M
2021-02-01 23:35:42 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 350.00M
2021-02-01 23:35:43 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 375.00M
2021-02-01 23:35:44 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 400.00M
2021-02-01 23:35:45 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 425.00M
2021-02-01 23:35:46 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 450.00M
2021-02-01 23:35:47 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 470.00M
2021-02-01 23:35:52 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 2. to 500
2021-02-01 23:35:52 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 125.00M
2021-02-01 23:35:53 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 150.00M
2021-02-01 23:35:54 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 175.00M
2021-02-01 23:35:55 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 200.00M
2021-02-01 23:35:56 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 225.00M
2021-02-01 23:35:57 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 250.00M
2021-02-01 23:35:58 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 275.00M
2021-02-01 23:35:59 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 300.00M
2021-02-01 23:36:00 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 325.00M
2021-02-01 23:36:02 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 350.00M
2021-02-01 23:36:03 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 375.00M
2021-02-01 23:36:04 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 400.00M
2021-02-01 23:36:05 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 425.00M
2021-02-01 23:36:06 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 450.00M
2021-02-01 23:36:07 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 475.00M
2021-02-01 23:36:08 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 500.00M
2021-02-01 23:36:11 driver-btm-soc.c:6051:set_timeout: freq 515 final timeout=458
ENV 32 FAN 4860
2021-02-01 23:36:11 freq_tuning.c:621:freq_tuning_prepare_works: Fail to open test pattern file /dev/91602_pattern_60.txt.
2021-02-01 23:36:11 freq_tuning.c:3090:do_pre_test_for_user_mode: Pre-test cost 0s.
2021-02-01 23:36:12 power.c:458:get_chain_voltage: chain[0], voltage is: 18.56
2021-02-01 23:36:12 power.c:458:get_chain_voltage: chain[2], voltage is: 18.58
2021-02-01 23:36:12 power.c:482:get_average_voltage: average voltage is: 18.57
2021-02-01 23:36:12 driver-btm-soc.c:8387:bitmain_soc_init: Init done!
2021-02-01 23:36:12 driver-btm-soc.c:8389:bitmain_soc_init: ideal_hash_rate_fixed 15000
2021-02-01 23:36:13 temperature.c:1087:read_temp_func: bring_up_pcb_temp = 35
2021-02-01 23:36:13 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-02-01 23:36:13 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2021-02-01 23:36:13 driver-btm-soc.c:8823:send_job: Version num 2
2021-02-01 23:36:41 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-02-01 23:36:42 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-02-01 23:36:44 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2021-02-01 23:36:46 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-02-01 23:36:47 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-02-01 23:36:49 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!

8 条评论

正式评论
Nick

2021年08月19日 09:09
Dear

1 Please change a good PSU to test it

2 Please flash the SD card program to recover the control board
Please download the SD card file in the below link

https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image
评论操作固定链接
Nathaniel

2021年02月02日 02:42
Dear Mai,

Thanks for your consultation!

Missing hashboard issue may be caused by various reasons such as accumulated dust, loose heatsinks, bad signal cables, broken sockets, or unworking connectors.

Try the methods below to troubleshoot the problem, if not working, you need to send it back for repair.
1. Clean the hashboards and find whether there are any heatsinks loosen.
2. Check the signal cables and PSU connectors by shifting them to good ones.
0

评论操作固定链接
Jack Jewison

2021年02月25日 21:03
Hello,

I recently purchased a T15 and have the same issue but on board 3. I was not able to find any loose connections and cleaning did not fix the issue.

Is there any options to send in the faulty hash board or are replacement parts available?

Thanks,

Jack.

Booting Linux on physical CPU 0x0

Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018

CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine model: Xilinx Zynq

cma: Reserved 16 MiB at 0x0e000000

Memory policy: Data cache writealloc

On node 0 totalpages: 61440

free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000

Normal zone: 480 pages used for memmap

Normal zone: 0 pages reserved

Normal zone: 61440 pages, LIFO batch:15

percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152

pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096

pcpu-alloc: [0] 0 [0] 1

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960

Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk

PID hash table entries: 1024 (order: 0, 4096 bytes)

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Memory: 197340K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32036K reserved, 16384K cma-reserved, 0K highmem)

Virtual kernel memory layout:

vector : 0xffff0000 - 0xffff1000 ( 4 kB)

fixmap : 0xffc00000 - 0xfff00000 (3072 kB)

vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)

lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)

pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

.text : 0xc0008000 - 0xc090c424 (9234 kB)

.init : 0xc0a00000 - 0xc0b00000 (1024 kB)

.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)

.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)

Preemptible hierarchical RCU implementation.

Build-time adjustment of leaf fanout to 32.

RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.

RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2

NR_IRQS:16 nr_irqs:16 16

efuse mapped to cf800000

ps7-slcr mapped to cf802000

L2C: platform modifies aux control register: 0x72360000 -> 0x72760000

L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000

L2C-310 erratum 769419 enabled

L2C-310 enabling early BRESP for Cortex-A9

L2C-310 full line of zeros enabled for Cortex-A9

L2C-310 ID prefetch enabled, offset 1 lines

L2C-310 dynamic clock gating enabled, standby mode enabled

L2C-310 cache controller enabled, 8 ways, 512 kB

L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001

zynq_clock_init: clkc starts at cf802100

Zynq clock init

sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns

clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns

Switching to timer-based delay loop, resolution 3ns

clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns

ps7-ttc #0 at cf80a000, irq=18

Console: colour dummy device 80x30

Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

CPU: Testing write buffer coherency: ok

CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

Setting up static identity map for 0x100000 - 0x100058

CPU1: failed to boot: -1

Brought up 1 CPUs

SMP: Total of 1 processors activated (666.66 BogoMIPS).

CPU: All CPU(s) started in SVC mode.

devtmpfs: initialized

VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

pinctrl core: initialized pinctrl subsystem

NET: Registered protocol family 16

DMA: preallocated 256 KiB pool for atomic coherent allocations

cpuidle: using governor menu

hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.

hw-breakpoint: maximum watchpoint size is 4 bytes.

zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000

vgaarb: loaded

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

media: Linux media interface: v0.10

Linux video capture interface: v2.00

pps_core: LinuxPPS API ver. 1 registered

pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

PTP clock support registered

EDAC MC: Ver: 3.0.0

Advanced Linux Sound Architecture Driver Initialized.

clocksource: Switched to clocksource arm_global_timer

NET: Registered protocol family 2

TCP established hash table entries: 2048 (order: 1, 8192 bytes)

TCP bind hash table entries: 2048 (order: 2, 16384 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

UDP hash table entries: 256 (order: 1, 8192 bytes)

UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

NET: Registered protocol family 1

RPC: Registered named UNIX socket transport module.

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

PCI: CLS 0 bytes, default 64

Trying to unpack rootfs image as initramfs...

rootfs image is not initramfs (no cpio magic); looks like an initrd

Freeing initrd memory: 18996K (cc873000 - cdb00000)

hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available

futex hash table entries: 512 (order: 3, 32768 bytes)

workingset: timestamp_bits=28 max_order=16 bucket_order=0

jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.

io scheduler noop registered

io scheduler deadline registered

io scheduler cfq registered (default)

dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330

dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16

e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps

console [ttyPS0] enabled

xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000

[drm] Initialized drm 1.1.0 20060810

brd: module loaded

loop: module loaded

CAN device driver interface

gpiod_set_value: invalid GPIO

libphy: MACB_mii_bus: probed

macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)

Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)

e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k

e1000e: Copyright(c) 1999 - 2015 Intel Corporation.

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

ehci-pci: EHCI PCI platform driver

usbcore: registered new interface driver usb-storage

mousedev: PS/2 mouse device common for all mice

i2c /dev entries driver

Xilinx Zynq CpuIdle Driver started

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright(c) Pierre Ossman

sdhci-pltfm: SDHCI platform and OF driver helper

mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA

ledtrig-cpu: registered to indicate activity on CPUs

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda

nand: Micron MT29F2G08ABAEAWP

nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64

nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip

Bad block table found at page 131008, version 0x01

Bad block table found at page 130944, version 0x01

6 ofpart partitions found on MTD device pl35x-nand

Creating 6 MTD partitions on "pl35x-nand":

0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"

0x000002800000-0x000004800000 : "ramfs"

0x000004800000-0x000005000000 : "configs"

0x000005000000-0x000006000000 : "reserve"

0x000006000000-0x000008000000 : "ramfs-bak"

0x000008000000-0x000010000000 : "reserve1"

NET: Registered protocol family 10

sit: IPv6 over IPv4 tunneling driver

NET: Registered protocol family 17

can: controller area network core (rev 20120528 abi 9)

NET: Registered protocol family 29

can: raw protocol (rev 20120528)

can: broadcast manager protocol (rev 20120528 t)

can: netlink gateway (rev 20130117) max_hops=1

zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'

zynq_pm_late_init: Unable to map DDRC IO memory.

Registering SWP/SWPB emulation handler

hctosys: unable to open rtc device (rtc0)

ALSA device list:

No soundcards found.

RAMDISK: gzip image found at block 0

EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities

EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)

VFS: Mounted root (ext4 filesystem) on device 1:0.

devtmpfs: mounted

Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)

EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr

random: dd urandom read with 0 bits of entropy available

ubi0: attaching mtd2

ubi0: scanning is finished

ubi0: attached mtd2 (name "configs", size 8 MiB)

ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096

ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0

ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128

ubi0: max/mean erase counter: 9/4, WL threshold: 4096, image sequence number: 603866866

ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40

ubi0: background thread "ubi_bgt0d" started, PID 708

UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711

UBIFS (ubi0:0): recovery needed

UBIFS (ubi0:0): recovery completed

UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"

UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)

UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)

UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 5F5DA65B-C6F7-4F7F-B67A-F414FD562357, small LPT model

ubi1: attaching mtd5

ubi1: scanning is finished

ubi1: attached mtd5 (name "reserve1", size 128 MiB)

ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096

ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0

ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128

ubi1: max/mean erase counter: 1781/689, WL threshold: 4096, image sequence number: 2026370313

ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36

ubi1: background thread "ubi_bgt1d" started, PID 720

UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723

UBIFS (ubi1:0): recovery needed

UBIFS (ubi1:0): recovery completed

UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"

UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)

UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)

UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 53A20D16-D922-48E9-90B3-925DDFE981F5, small LPT model

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz

macb e000b000.ethernet eth0: link up (100/Full)

IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

In axi fpga driver!

request_mem_region OK!

AXI fpga dev virtual address is 0xcfb38000

*base_vir_addr = 0xab01b

In fpga mem driver!

request_mem_region OK!

fpga mem virtual address is 0xd2000000

random: nonblocking pool is initialized

[2021-02-24 23:04:08.966] start listen on 6060 ...

[2021-02-24 23:12:27.906] set_start_time_point total_tv_start_sys=899 total_tv_end_sys=900

2021-02-24 23:03:38 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version

2021-02-24 23:03:38 driver-btm-soc.c:8125:bitmain_soc_init: T15

2021-02-24 23:03:38 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1

2021-02-24 23:03:38 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1

2021-02-24 23:03:38 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false

2021-02-24 23:03:38 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0

2021-02-24 23:03:38 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn

2021-02-24 23:03:38 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX

2021-02-24 23:03:38 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:46:16 CST 2019 type: Antminer T15

2021-02-24 23:03:38 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:53:57

2021-02-24 23:03:38 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...

2021-02-24 23:03:40 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 816065c25c20881c

2021-02-24 23:03:40 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B

2021-02-24 23:03:40 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0x7

2021-02-24 23:03:40 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist

2021-02-24 23:03:40 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist

2021-02-24 23:03:40 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist

2021-02-24 23:03:48 eeprom.c:1418:eeprom_load: done

2021-02-24 23:03:48 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0101

2021-02-24 23:03:48 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0100

2021-02-24 23:03:48 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0101

2021-02-24 23:03:48 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0100

2021-02-24 23:03:48 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0101

2021-02-24 23:03:48 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0100

2021-02-24 23:03:49 dspic33ep16gs202.c:538:reset_pic: chain[0] ok

2021-02-24 23:03:53 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok

2021-02-24 23:03:54 dspic33ep16gs202.c:538:reset_pic: chain[1] ok

2021-02-24 23:03:59 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok

2021-02-24 23:03:59 dspic33ep16gs202.c:538:reset_pic: chain[2] ok

2021-02-24 23:04:04 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[2] ok

2021-02-24 23:04:04 power.c:137:power_init: power init ...

2021-02-24 23:04:04 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 2

2021-02-24 23:04:04 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 1

2021-02-24 23:04:04 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 0

2021-02-24 23:04:04 power.c:114:power_on: init gpio907

2021-02-24 23:04:06 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!

2021-02-24 23:04:06 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!

2021-02-24 23:04:07 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!

2021-02-24 23:04:10 driver-btm-soc.c:8241:bitmain_soc_init: Enter 30s sleep to make sure power release finish.

2021-02-24 23:04:40 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[0] = 19.500000

2021-02-24 23:04:40 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[1] = 19.500000

2021-02-24 23:04:40 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[2] = 19.500000

2021-02-24 23:04:40 driver-btm-soc.c:7630:set_working_voltage_by_eeprom: max = 19.50, min = 19.50

2021-02-24 23:04:40 power.c:149:set_working_voltage: working_voltage = 19.500000

2021-02-24 23:04:40 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...

2021-02-24 23:04:40 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000

2021-02-24 23:04:40 eeprom.c:840:travel_eeprom_store: chain[0] data in eeprom is:

magic number: 0x7f

freq data per ASIC:

IC[000]:420 IC[001]:435 IC[002]:450 IC[003]:450 IC[004]:450

IC[005]:435 IC[006]:420 IC[007]:450 IC[008]:450 IC[009]:450

IC[010]:435 IC[011]:450 IC[012]:420 IC[013]:450 IC[014]:450

IC[015]:435 IC[016]:420 IC[017]:450 IC[018]:450 IC[019]:450

IC[020]:450 IC[021]:450 IC[022]:450 IC[023]:435 IC[024]:420

IC[025]:420 IC[026]:450 IC[027]:450 IC[028]:450 IC[029]:435

IC[030]:435 IC[031]:450 IC[032]:450 IC[033]:450 IC[034]:420

IC[035]:450 IC[036]:450 IC[037]:435 IC[038]:450 IC[039]:420

IC[040]:450 IC[041]:450 IC[042]:435 IC[043]:450 IC[044]:420

IC[045]:450 IC[046]:420 IC[047]:435 IC[048]:450 IC[049]:450

IC[050]:450 IC[051]:450 IC[052]:450 IC[053]:420 IC[054]:435

IC[055]:435 IC[056]:450 IC[057]:450 IC[058]:420 IC[059]:450

voltage: 18.80 V

hash rate: 06731 GH/s

freq data per ASIC in mode2:

IC[000]:485 IC[001]:500 IC[002]:515 IC[003]:515 IC[004]:515

IC[005]:515 IC[006]:500 IC[007]:485 IC[008]:515 IC[009]:515

IC[010]:515 IC[011]:515 IC[012]:485 IC[013]:515 IC[014]:500

IC[015]:500 IC[016]:515 IC[017]:515 IC[018]:485 IC[019]:515

IC[020]:515 IC[021]:515 IC[022]:515 IC[023]:500 IC[024]:485

IC[025]:485 IC[026]:515 IC[027]:515 IC[028]:515 IC[029]:500

IC[030]:515 IC[031]:515 IC[032]:500 IC[033]:515 IC[034]:485

IC[035]:515 IC[036]:515 IC[037]:500 IC[038]:515 IC[039]:485

IC[040]:515 IC[041]:515 IC[042]:500 IC[043]:515 IC[044]:485

IC[045]:515 IC[046]:485 IC[047]:500 IC[048]:515 IC[049]:515

IC[050]:515 IC[051]:515 IC[052]:500 IC[053]:485 IC[054]:515

IC[055]:515 IC[056]:515 IC[057]:500 IC[058]:485 IC[059]:515

voltage in mode2: 19.50 V

hash rate in mode2: 07731 GH/s

2021-02-24 23:04:41 eeprom.c:840:travel_eeprom_store: chain[1] data in eeprom is:

magic number: 0x7f

freq data per ASIC:

IC[000]:420 IC[001]:420 IC[002]:420 IC[003]:420 IC[004]:405

IC[005]:405 IC[006]:420 IC[007]:420 IC[008]:420 IC[009]:420

IC[010]:420 IC[011]:420 IC[012]:420 IC[013]:420 IC[014]:405

IC[015]:420 IC[016]:405 IC[017]:420 IC[018]:420 IC[019]:420

IC[020]:420 IC[021]:405 IC[022]:420 IC[023]:420 IC[024]:420

IC[025]:420 IC[026]:420 IC[027]:420 IC[028]:405 IC[029]:420

IC[030]:420 IC[031]:420 IC[032]:405 IC[033]:420 IC[034]:420

IC[035]:420 IC[036]:420 IC[037]:405 IC[038]:420 IC[039]:420

IC[040]:420 IC[041]:420 IC[042]:405 IC[043]:420 IC[044]:420

IC[045]:405 IC[046]:420 IC[047]:420 IC[048]:420 IC[049]:420

IC[050]:405 IC[051]:420 IC[052]:420 IC[053]:420 IC[054]:420

IC[055]:405 IC[056]:420 IC[057]:420 IC[058]:420 IC[059]:420

voltage: 18.80 V

hash rate: 06372 GH/s

freq data per ASIC in mode2:

IC[000]:505 IC[001]:505 IC[002]:505 IC[003]:505 IC[004]:475

IC[005]:475 IC[006]:505 IC[007]:505 IC[008]:505 IC[009]:505

IC[010]:505 IC[011]:505 IC[012]:505 IC[013]:505 IC[014]:475

IC[015]:505 IC[016]:475 IC[017]:505 IC[018]:505 IC[019]:505

IC[020]:505 IC[021]:475 IC[022]:505 IC[023]:505 IC[024]:505

IC[025]:505 IC[026]:505 IC[027]:505 IC[028]:475 IC[029]:505

IC[030]:505 IC[031]:505 IC[032]:475 IC[033]:505 IC[034]:505

IC[035]:505 IC[036]:505 IC[037]:475 IC[038]:505 IC[039]:505

IC[040]:505 IC[041]:505 IC[042]:505 IC[043]:505 IC[044]:475

IC[045]:475 IC[046]:505 IC[047]:505 IC[048]:505 IC[049]:505

IC[050]:475 IC[051]:505 IC[052]:505 IC[053]:505 IC[054]:505

IC[055]:475 IC[056]:505 IC[057]:505 IC[058]:505 IC[059]:505

voltage in mode2: 19.50 V

hash rate in mode2: 07643 GH/s

2021-02-24 23:04:41 eeprom.c:840:travel_eeprom_store: chain[2] data in eeprom is:

magic number: 0x7f

freq data per ASIC:

IC[000]:450 IC[001]:450 IC[002]:435 IC[003]:450 IC[004]:450

IC[005]:435 IC[006]:450 IC[007]:450 IC[008]:450 IC[009]:450

IC[010]:450 IC[011]:450 IC[012]:450 IC[013]:435 IC[014]:450

IC[015]:435 IC[016]:450 IC[017]:450 IC[018]:450 IC[019]:450

IC[020]:450 IC[021]:450 IC[022]:450 IC[023]:435 IC[024]:450

IC[025]:435 IC[026]:450 IC[027]:450 IC[028]:450 IC[029]:450

IC[030]:450 IC[031]:450 IC[032]:435 IC[033]:450 IC[034]:450

IC[035]:435 IC[036]:450 IC[037]:450 IC[038]:450 IC[039]:450

IC[040]:450 IC[041]:450 IC[042]:450 IC[043]:450 IC[044]:435

IC[045]:435 IC[046]:450 IC[047]:450 IC[048]:450 IC[049]:450

IC[050]:450 IC[051]:450 IC[052]:450 IC[053]:450 IC[054]:435

IC[055]:450 IC[056]:450 IC[057]:435 IC[058]:450 IC[059]:450

voltage: 18.80 V

hash rate: 06848 GH/s

freq data per ASIC in mode2:

IC[000]:520 IC[001]:520 IC[002]:505 IC[003]:520 IC[004]:520

IC[005]:520 IC[006]:520 IC[007]:520 IC[008]:520 IC[009]:505

IC[010]:520 IC[011]:520 IC[012]:520 IC[013]:505 IC[014]:520

IC[015]:505 IC[016]:520 IC[017]:520 IC[018]:520 IC[019]:520

IC[020]:520 IC[021]:505 IC[022]:520 IC[023]:520 IC[024]:520

IC[025]:505 IC[026]:520 IC[027]:520 IC[028]:520 IC[029]:520

IC[030]:520 IC[031]:520 IC[032]:505 IC[033]:520 IC[034]:520

IC[035]:505 IC[036]:520 IC[037]:520 IC[038]:520 IC[039]:520

IC[040]:520 IC[041]:520 IC[042]:520 IC[043]:520 IC[044]:505

IC[045]:505 IC[046]:520 IC[047]:520 IC[048]:520 IC[049]:520

IC[050]:520 IC[051]:520 IC[052]:520 IC[053]:520 IC[054]:505

IC[055]:520 IC[056]:520 IC[057]:505 IC[058]:520 IC[059]:520

voltage in mode2: 19.50 V

hash rate in mode2: 07927 GH/s

2021-02-24 23:04:41 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!

2021-02-24 23:04:41 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff

2021-02-24 23:04:44 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe

2021-02-24 23:04:47 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0

2021-02-24 23:04:47 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0

2021-02-24 23:04:47 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:04:48 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0

2021-02-24 23:04:48 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:04:49 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0

2021-02-24 23:04:49 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:04:50 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0

2021-02-24 23:04:50 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:04:50 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0

2021-02-24 23:04:50 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff

2021-02-24 23:04:53 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe

2021-02-24 23:04:57 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 60

2021-02-24 23:04:58 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1!

2021-02-24 23:04:58 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe

2021-02-24 23:05:01 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:05:04 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0

2021-02-24 23:05:04 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 1

2021-02-24 23:05:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:05:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1

2021-02-24 23:05:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:05:05 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1

2021-02-24 23:05:05 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:05:06 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1

2021-02-24 23:05:06 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:05:06 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1

2021-02-24 23:05:06 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe

2021-02-24 23:05:09 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:05:13 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 60

2021-02-24 23:05:13 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2!

2021-02-24 23:05:13 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:05:16 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:05:19 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0

2021-02-24 23:05:19 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 2

2021-02-24 23:05:19 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:05:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:05:20 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:05:21 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:05:21 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:05:22 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:05:22 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:05:22 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:05:22 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:05:25 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:05:29 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0

2021-02-24 23:05:29 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 2

2021-02-24 23:05:29 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:05:31 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:05:31 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:05:32 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:05:32 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:05:34 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:05:34 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:05:35 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:05:35 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:05:38 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:05:42 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0

2021-02-24 23:05:42 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 2

2021-02-24 23:05:42 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:05:45 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:05:45 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:05:48 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:05:48 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:05:51 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:05:51 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:05:54 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:05:54 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:05:57 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:06:01 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0

2021-02-24 23:06:01 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [0] times, power off hash board and wait [30] sec

2021-02-24 23:06:02 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!

2021-02-24 23:06:32 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...

2021-02-24 23:06:32 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000

2021-02-24 23:06:33 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2!

2021-02-24 23:06:35 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1

2021-02-24 23:06:35 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 2

2021-02-24 23:06:35 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:06:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:06:36 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:06:37 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:06:37 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:06:37 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:06:37 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:06:38 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:06:38 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:06:41 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:06:45 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0

2021-02-24 23:06:45 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 2

2021-02-24 23:06:45 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:06:47 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:06:47 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:06:48 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:06:48 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:06:50 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:06:50 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:06:51 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:06:51 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:06:54 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:06:58 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0

2021-02-24 23:06:58 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 2

2021-02-24 23:06:58 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:07:01 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:07:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:07:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:07:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:07:07 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:07:07 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:07:10 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:07:10 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:07:13 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:07:17 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0

2021-02-24 23:07:17 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [1] times, power off hash board and wait [30] sec

2021-02-24 23:07:18 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!

2021-02-24 23:07:48 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...

2021-02-24 23:07:48 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000

2021-02-24 23:07:49 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2!

2021-02-24 23:07:51 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 2

2021-02-24 23:07:51 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 2

2021-02-24 23:07:51 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:07:52 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:07:52 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:07:53 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:07:53 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:07:53 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:07:53 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:07:54 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:07:54 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:07:57 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:08:01 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0

2021-02-24 23:08:01 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 2

2021-02-24 23:08:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:08:03 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:08:03 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:08:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:08:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:08:06 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:08:06 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:08:07 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:08:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:08:10 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:08:14 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0

2021-02-24 23:08:14 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 2

2021-02-24 23:08:14 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:08:17 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:08:17 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:08:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:08:20 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:08:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:08:23 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:08:26 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:08:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:08:29 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:08:33 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0

2021-02-24 23:08:33 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [2] times, power off hash board and wait [30] sec

2021-02-24 23:08:34 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!

2021-02-24 23:09:04 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...

2021-02-24 23:09:04 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000

2021-02-24 23:09:05 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2!

2021-02-24 23:09:07 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 3

2021-02-24 23:09:07 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 2

2021-02-24 23:09:07 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:09:08 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:09:08 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:09:08 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:09:08 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:09:09 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:09:09 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:09:10 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:09:10 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:09:13 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:09:17 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0

2021-02-24 23:09:17 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 2

2021-02-24 23:09:17 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:09:18 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:09:18 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:09:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:09:20 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:09:21 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:09:21 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:09:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:09:23 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:09:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:09:30 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0

2021-02-24 23:09:30 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 2

2021-02-24 23:09:30 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:09:33 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:09:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:09:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:09:36 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:09:39 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:09:39 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:09:42 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2

2021-02-24 23:09:42 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc

2021-02-24 23:09:45 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:09:49 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0

2021-02-24 23:09:49 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [3] times, power off hash board and wait [30] sec

2021-02-24 23:09:49 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!

2021-02-24 23:10:19 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...

2021-02-24 23:10:20 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000

2021-02-24 23:10:21 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2!

2021-02-24 23:10:23 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!

2021-02-24 23:10:23 driver-btm-soc.c:7220:check_asic_num_by_force_open_core: removed chain 2 due to asic num error

2021-02-24 23:10:23 driver-btm-soc.c:7238:balance_domain_voltage: To balance voltage domain, open all core and reset hash board after find asic num.

2021-02-24 23:10:23 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 0

2021-02-24 23:10:23 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:10:24 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0

2021-02-24 23:10:24 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9

2021-02-24 23:10:27 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:10:30 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 1

2021-02-24 23:10:30 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:10:31 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1

2021-02-24 23:10:31 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa

2021-02-24 23:10:34 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:10:37 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 0

2021-02-24 23:10:37 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:10:38 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0

2021-02-24 23:10:38 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9

2021-02-24 23:10:41 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:10:44 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 1

2021-02-24 23:10:44 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32

2021-02-24 23:10:45 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1

2021-02-24 23:10:45 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa

2021-02-24 23:10:48 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:10:51 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 0

2021-02-24 23:10:51 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:10:54 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0

2021-02-24 23:10:54 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9

2021-02-24 23:10:57 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:11:00 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 1

2021-02-24 23:11:00 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

2021-02-24 23:11:03 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1

2021-02-24 23:11:03 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa

2021-02-24 23:11:06 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8

2021-02-24 23:11:17 driver-btm-soc.c:7475:calculate_timeout: dev->timeout = 857

2021-02-24 23:11:17 driver-btm-soc.c:3012:set_baud: set baud=1

2021-02-24 23:11:17 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101

2021-02-24 23:11:17 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101

2021-02-24 23:11:17 driver-btm-soc.c:3023:set_baud: read bc write is 0x81001a

2021-02-24 23:11:17 driver-btm-soc.c:4076:set_clock_delay_control: core_data = 0x04

2021-02-24 23:11:17 driver-btm-soc.c:8293:bitmain_soc_init: Open 1/4 core for reading temperature.

2021-02-24 23:11:17 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16

2021-02-24 23:11:17 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0

2021-02-24 23:11:18 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1

2021-02-24 23:11:18 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0

2021-02-24 23:11:18 temperature.c:422:calibration_sensor_offset: chain[0] temp info,Bad. Reload from eeprom..

sensor type = 0,sensor num = 4

sensor pos: 15 11 45 41 0 0 0 0

sensor offset: 0 0 0 0 0 0 0 0

2021-02-24 23:11:18 temperature.c:448:calibration_sensor_offset: chain[0] temp chip I2C addr=0x98

2021-02-24 23:11:18 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0

2021-02-24 23:11:18 temperature.c:531:calibration_sensor_offset: Warning: Chain[0] has no temp info ! we will fix it

2021-02-24 23:11:18 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093818, cmd_buf[1]=0x6131, cmd_buf[2]=0x2000000, misc=0x6131

2021-02-24 23:11:19 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[14]

2021-02-24 23:11:19 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[14] get middle temp offset=-5 typeID=55

2021-02-24 23:11:19 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092818, cmd_buf[1]=0x6131, cmd_buf[2]=0x1000000, misc=0x6131

2021-02-24 23:11:20 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[10]

2021-02-24 23:11:20 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[10] get middle temp offset=-5 typeID=55

2021-02-24 23:11:20 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109b018, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131

2021-02-24 23:11:21 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[44]

2021-02-24 23:11:21 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[44] get middle temp offset=-5 typeID=55

2021-02-24 23:11:21 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109a018, cmd_buf[1]=0x6131, cmd_buf[2]=0xa000000, misc=0x6131

2021-02-24 23:11:22 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[40]

2021-02-24 23:11:22 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[40] get middle temp offset=-5 typeID=55

2021-02-24 23:11:22 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0

2021-02-24 23:11:22 temperature.c:422:calibration_sensor_offset: chain[1] temp info,Bad. Reload from eeprom..

sensor type = 0,sensor num = 4

sensor pos: 15 11 45 41 0 0 0 0

sensor offset: 0 0 0 0 0 0 0 0

2021-02-24 23:11:22 temperature.c:448:calibration_sensor_offset: chain[1] temp chip I2C addr=0x98

2021-02-24 23:11:22 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0

2021-02-24 23:11:22 temperature.c:531:calibration_sensor_offset: Warning: Chain[1] has no temp info ! we will fix it

2021-02-24 23:11:22 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093818, cmd_buf[1]=0x6131, cmd_buf[2]=0x2000000, misc=0x6131

2021-02-24 23:11:23 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[14]

2021-02-24 23:11:23 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[14] get middle temp offset=-5 typeID=55

2021-02-24 23:11:23 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092818, cmd_buf[1]=0x6131, cmd_buf[2]=0x1000000, misc=0x6131

2021-02-24 23:11:24 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[10]

2021-02-24 23:11:24 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[10] get middle temp offset=-5 typeID=55

2021-02-24 23:11:24 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109b018, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131

2021-02-24 23:11:25 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[44]

2021-02-24 23:11:25 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[44] get middle temp offset=-5 typeID=55

2021-02-24 23:11:25 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109a018, cmd_buf[1]=0x6131, cmd_buf[2]=0xa000000, misc=0x6131

2021-02-24 23:11:26 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[40]

2021-02-24 23:11:26 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-5 typeID=55

2021-02-24 23:11:28 temperature.c:589:do_calibration_temperature_sensor: bring up lowest temperature is 12

ENV 11 FAN 5880

2021-02-24 23:11:33 driver-btm-soc.c:8298:bitmain_soc_init: Boot environment temperature is 11

2021-02-24 23:11:33 driver-btm-soc.c:8308:bitmain_soc_init: set TICKET_MASK

2021-02-24 23:11:33 driver-btm-soc.c:4130:open_core_bm1391: Start Open Core!!

2021-02-24 23:11:38 driver-btm-soc.c:4202:open_core_bm1391: End Open Core!!

2021-02-24 23:11:38 freq_tuning.c:312:freq_tuning_get_max_freq: Max freq of tuning is 550

ENV 11 FAN 5940

2021-02-24 23:11:38 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[0] = 20.288067

2021-02-24 23:11:38 power.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 20.29 ...

2021-02-24 23:11:38 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[15] = 20.037782

2021-02-24 23:11:38 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.000000

2021-02-24 23:11:39 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[13] = 20.071153

2021-02-24 23:11:39 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.037782

2021-02-24 23:11:40 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[11] = 20.104524

2021-02-24 23:11:41 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.071153

2021-02-24 23:11:42 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[9] = 20.137896

2021-02-24 23:11:42 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.104524

2021-02-24 23:11:43 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[7] = 20.171267

2021-02-24 23:11:43 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.137896

2021-02-24 23:11:44 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[5] = 20.204639

2021-02-24 23:11:44 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.171267

2021-02-24 23:11:45 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[3] = 20.238010

2021-02-24 23:11:45 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.204639

2021-02-24 23:11:46 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[1] = 20.271382

2021-02-24 23:11:46 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.238010

2021-02-24 23:11:47 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[0] = 20.288067

2021-02-24 23:11:47 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.271382

2021-02-24 23:11:48 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 0. to 485

2021-02-24 23:11:48 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 125.00M

2021-02-24 23:11:49 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 150.00M

2021-02-24 23:11:50 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 175.00M

2021-02-24 23:11:51 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 200.00M

2021-02-24 23:11:52 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 225.00M

2021-02-24 23:11:53 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 250.00M

2021-02-24 23:11:54 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 275.00M

2021-02-24 23:11:55 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 300.00M

2021-02-24 23:11:56 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 325.00M

2021-02-24 23:11:57 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 350.00M

2021-02-24 23:11:58 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 375.00M

2021-02-24 23:11:59 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 400.00M

2021-02-24 23:12:00 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 425.00M

2021-02-24 23:12:01 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 450.00M

2021-02-24 23:12:02 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 475.00M

2021-02-24 23:12:03 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 485.00M

2021-02-24 23:12:08 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 1. to 475

2021-02-24 23:12:08 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 125.00M

2021-02-24 23:12:09 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 150.00M

2021-02-24 23:12:10 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 175.00M

2021-02-24 23:12:11 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 200.00M

2021-02-24 23:12:12 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 225.00M

2021-02-24 23:12:13 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 250.00M

2021-02-24 23:12:14 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 275.00M

2021-02-24 23:12:15 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 300.00M

2021-02-24 23:12:16 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 325.00M

2021-02-24 23:12:17 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 350.00M

2021-02-24 23:12:18 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 375.00M

2021-02-24 23:12:19 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 400.00M

2021-02-24 23:12:20 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 425.00M

2021-02-24 23:12:21 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 450.00M

2021-02-24 23:12:22 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 475.00M

2021-02-24 23:12:27 driver-btm-soc.c:6051:set_timeout: freq 505 final timeout=467

ENV 11 FAN 5940

2021-02-24 23:12:28 power.c:458:get_chain_voltage: chain[0], voltage is: 20.33

2021-02-24 23:12:29 power.c:458:get_chain_voltage: chain[1], voltage is: 20.36

2021-02-24 23:12:29 power.c:482:get_average_voltage: average voltage is: 20.35

2021-02-24 23:12:29 driver-btm-soc.c:8387:bitmain_soc_init: Init done!

2021-02-24 23:12:29 driver-btm-soc.c:8389:bitmain_soc_init: ideal_hash_rate_fixed 15000

2021-02-24 23:12:29 temperature.c:1087:read_temp_func: bring_up_pcb_temp = 16

2021-02-24 23:12:30 driver-btm-soc.c:8823:send_job: Version num 1

2021-02-24 23:12:57 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-24 23:12:59 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-24 23:13:00 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-24 23:13:02 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-24 23:13:04 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-24 23:13:06 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3000

ENV 19 FAN 3000

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-24 23:43:15 driver-btm-soc.c:3731:check_system_work: The avg rate is 15343 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 00:13:53 driver-btm-soc.c:3731:check_system_work: The avg rate is 15421 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3120

ENV 19 FAN 3000

ENV 20 FAN 3120

ENV 20 FAN 3240

ENV 20 FAN 3240

ENV 20 FAN 3240

2021-02-25 00:44:31 driver-btm-soc.c:3731:check_system_work: The avg rate is 15175 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3120

2021-02-25 00:45:41 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 00:45:41 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 00:45:53 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 00:45:53 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 00:46:05 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 00:46:05 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 00:46:48 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 00:46:49 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 00:46:51 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 00:46:53 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 00:46:54 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 00:46:56 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3060

2021-02-25 01:17:04 driver-btm-soc.c:3731:check_system_work: The avg rate is 15366 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3120

ENV 20 FAN 3120

ENV 20 FAN 3120

ENV 20 FAN 3240

ENV 19 FAN 3240

2021-02-25 01:40:18 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 01:40:18 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 01:40:30 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 01:40:30 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 01:40:42 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 01:40:42 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 01:40:54 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 01:40:54 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 4, error status: 2

2021-02-25 01:41:37 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 01:41:38 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 01:41:40 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 01:41:42 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 01:41:43 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 01:41:45 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3120

ENV 19 FAN 3060

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 02:11:53 driver-btm-soc.c:3731:check_system_work: The avg rate is 15352 in 30 mins, PCB temperature between 26 ~ 53 ideal_hash_rate_fixed 15000

ENV 20 FAN 3120

ENV 20 FAN 3240

ENV 20 FAN 3240

ENV 20 FAN 3180

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 02:42:33 driver-btm-soc.c:3731:check_system_work: The avg rate is 15226 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 20 FAN 3120

ENV 20 FAN 3120

ENV 20 FAN 3120

2021-02-25 03:13:11 driver-btm-soc.c:3731:check_system_work: The avg rate is 15477 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3240

ENV 20 FAN 3120

2021-02-25 03:19:54 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 03:19:54 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 03:20:06 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 03:20:06 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 03:20:18 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 03:20:18 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 03:21:01 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 03:21:02 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 03:21:04 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 03:21:06 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 03:21:07 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 03:21:09 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 20 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 03:40:54 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 03:40:54 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 03:41:06 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 03:41:06 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 03:41:18 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 03:41:18 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 03:41:30 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 03:41:30 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 4, error status: 2

2021-02-25 03:42:13 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 03:42:14 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 03:42:16 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 03:42:18 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 03:42:19 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 03:42:21 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 04:12:30 driver-btm-soc.c:3731:check_system_work: The avg rate is 15427 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3120

ENV 19 FAN 3000

ENV 19 FAN 3060

ENV 19 FAN 3060

ENV 19 FAN 3000

ENV 19 FAN 3060

2021-02-25 04:43:10 driver-btm-soc.c:3731:check_system_work: The avg rate is 15265 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3060

ENV 19 FAN 3120

ENV 19 FAN 3000

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 05:04:31 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 05:04:31 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 05:04:43 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 05:04:43 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 05:04:55 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 05:04:55 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 05:05:07 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 05:05:07 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 4, error status: 2

2021-02-25 05:05:19 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 05:05:19 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 5, error status: 2

2021-02-25 05:05:31 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 05:05:31 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 6, error status: 2

2021-02-25 05:06:13 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 05:06:15 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 05:06:17 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 05:06:18 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 05:06:20 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 05:06:22 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3000

ENV 19 FAN 3000

ENV 19 FAN 3000

2021-02-25 05:36:06 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 05:36:06 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 05:36:49 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 05:36:51 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 05:36:53 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 05:36:54 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 05:36:56 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 05:36:57 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3000

ENV 19 FAN 3000

ENV 19 FAN 3000

ENV 19 FAN 3000

ENV 19 FAN 3000

2021-02-25 06:07:08 driver-btm-soc.c:3731:check_system_work: The avg rate is 15410 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3000

ENV 19 FAN 3000

ENV 19 FAN 3000

ENV 19 FAN 3000

ENV 19 FAN 3000

ENV 19 FAN 3000

2021-02-25 06:37:48 driver-btm-soc.c:3731:check_system_work: The avg rate is 15525 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3000

ENV 19 FAN 3000

ENV 19 FAN 3000

ENV 19 FAN 3000

ENV 19 FAN 3000

ENV 19 FAN 3000

2021-02-25 07:04:19 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 07:04:19 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 07:04:31 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 07:04:31 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 07:04:43 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 07:04:43 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 07:05:25 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 07:05:27 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 07:05:29 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 07:05:30 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 07:05:32 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 07:05:34 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3000

ENV 19 FAN 3000

ENV 18 FAN 3000

ENV 19 FAN 3000

ENV 19 FAN 3120

2021-02-25 07:35:44 driver-btm-soc.c:3731:check_system_work: The avg rate is 15420 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3120

ENV 20 FAN 3120

2021-02-25 07:44:55 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 07:44:55 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 07:45:38 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 07:45:39 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 07:45:41 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 07:45:43 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 07:45:44 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 07:45:46 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 07:55:55 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 07:55:55 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 07:56:07 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 07:56:07 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 07:56:50 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 07:56:51 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 07:56:53 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 07:56:55 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 07:56:57 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 07:56:59 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3120

ENV 19 FAN 3000

2021-02-25 08:06:43 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 08:06:43 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 08:07:25 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 08:07:27 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 08:07:29 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 08:07:31 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 08:07:32 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 08:07:34 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 20 FAN 3060

2021-02-25 08:12:43 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 08:12:43 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 08:13:26 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 08:13:27 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 08:13:29 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 08:13:31 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 08:13:33 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 08:13:34 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 20 FAN 3120

ENV 20 FAN 3120

ENV 20 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 08:43:45 driver-btm-soc.c:3731:check_system_work: The avg rate is 15327 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3000

ENV 19 FAN 3120

2021-02-25 08:53:55 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 08:53:55 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 08:54:38 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 08:54:40 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 08:54:42 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 08:54:43 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 08:54:45 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 08:54:47 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 20 FAN 3060

ENV 20 FAN 3120

ENV 20 FAN 3120

ENV 19 FAN 3120

2021-02-25 09:14:55 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 09:14:55 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 09:15:38 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 09:15:40 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 09:15:41 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 09:15:43 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 09:15:45 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 09:15:46 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 20 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 09:45:59 driver-btm-soc.c:3731:check_system_work: The avg rate is 15401 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 20 FAN 3120

ENV 20 FAN 3120

2021-02-25 10:05:56 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 10:05:56 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 10:06:39 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 10:06:40 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 10:06:42 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 10:06:44 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 10:06:46 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 10:06:47 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 10:37:00 driver-btm-soc.c:3731:check_system_work: The avg rate is 15419 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 20 FAN 3120

ENV 20 FAN 3120

2021-02-25 10:52:44 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 10:52:44 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 10:52:56 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 10:52:56 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 10:53:39 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 10:53:41 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 10:53:42 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 10:53:44 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 10:53:46 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 10:53:47 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 20 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 11:23:58 driver-btm-soc.c:3731:check_system_work: The avg rate is 15476 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 20 FAN 3060

ENV 20 FAN 3120

ENV 20 FAN 3120

2021-02-25 11:54:40 driver-btm-soc.c:3731:check_system_work: The avg rate is 15341 in 30 mins, PCB temperature between 26 ~ 53 ideal_hash_rate_fixed 15000

ENV 20 FAN 3120

ENV 20 FAN 3120

ENV 20 FAN 3120

ENV 20 FAN 3120

ENV 19 FAN 3120

ENV 20 FAN 3120

2021-02-25 12:25:22 driver-btm-soc.c:3731:check_system_work: The avg rate is 15390 in 30 mins, PCB temperature between 26 ~ 53 ideal_hash_rate_fixed 15000

ENV 20 FAN 3120

ENV 20 FAN 3120

2021-02-25 12:31:09 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 12:31:09 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 12:31:52 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 12:31:54 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 12:31:56 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 12:31:57 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 12:31:59 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 12:32:01 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 20 FAN 3120

ENV 19 FAN 3180

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 13:02:12 driver-btm-soc.c:3731:check_system_work: The avg rate is 15482 in 30 mins, PCB temperature between 26 ~ 53 ideal_hash_rate_fixed 15000

ENV 20 FAN 3120

ENV 20 FAN 3120

ENV 20 FAN 3180

ENV 20 FAN 3240

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 13:32:54 driver-btm-soc.c:3731:check_system_work: The avg rate is 15499 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 20 FAN 3120

ENV 20 FAN 3180

2021-02-25 13:57:34 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 13:57:34 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 13:57:46 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 13:57:46 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 13:58:29 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 13:58:31 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 13:58:32 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 13:58:34 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 13:58:36 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 13:58:37 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 20 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 14:20:58 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:20:58 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 14:21:10 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:21:10 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 14:21:22 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:21:22 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 14:22:05 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 14:22:07 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 14:22:09 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 14:22:11 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 14:22:12 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 14:22:14 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 14:23:34 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:23:34 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 14:23:46 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:23:46 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 14:23:58 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:23:58 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 14:24:41 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 14:24:42 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 14:24:44 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 14:24:46 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 14:24:48 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 14:24:49 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 14:28:34 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:28:34 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 14:28:46 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:28:46 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 14:28:58 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:28:58 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 14:29:10 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:29:10 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 4, error status: 2

2021-02-25 14:29:22 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:29:22 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 5, error status: 2

2021-02-25 14:29:34 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:29:34 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 6, error status: 2

2021-02-25 14:29:46 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:29:46 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 7, error status: 2

2021-02-25 14:29:58 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:29:58 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 8, error status: 2

2021-02-25 14:30:41 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 14:30:43 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 14:30:44 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 14:30:46 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 14:30:48 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 14:30:49 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 14:46:10 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:46:10 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 14:46:22 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:46:22 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 14:46:34 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:46:34 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 14:46:46 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:46:46 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 4, error status: 2

2021-02-25 14:46:58 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:46:58 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 5, error status: 2

2021-02-25 14:47:10 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 14:47:10 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 6, error status: 2

2021-02-25 14:47:53 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 14:47:55 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 14:47:56 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 14:47:58 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 14:48:00 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 14:48:01 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 20 FAN 3120

ENV 20 FAN 3180

ENV 20 FAN 3240

ENV 20 FAN 3180

ENV 20 FAN 3180

2021-02-25 15:18:15 driver-btm-soc.c:3731:check_system_work: The avg rate is 15422 in 30 mins, PCB temperature between 26 ~ 53 ideal_hash_rate_fixed 15000

ENV 20 FAN 3120

ENV 19 FAN 3180

ENV 20 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 15:47:34 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 15:47:34 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 15:47:46 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 15:47:46 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 15:47:58 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 15:47:58 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 15:48:10 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 15:48:10 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 4, error status: 2

2021-02-25 15:48:22 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 15:48:22 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 5, error status: 2

2021-02-25 15:48:34 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 15:48:34 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 6, error status: 2

2021-02-25 15:48:46 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 15:48:46 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 7, error status: 2

2021-02-25 15:49:29 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 15:49:31 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 15:49:33 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 15:49:34 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 15:49:36 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 15:49:38 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 20 FAN 3120

ENV 20 FAN 3120

ENV 20 FAN 3120

2021-02-25 16:08:46 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 16:08:46 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 16:08:58 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 16:08:58 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 16:09:10 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 16:09:10 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 16:09:22 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 16:09:22 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 4, error status: 2

2021-02-25 16:09:34 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 16:09:34 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 5, error status: 2

2021-02-25 16:09:46 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 16:09:46 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 6, error status: 2

2021-02-25 16:09:58 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 16:09:58 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 7, error status: 2

2021-02-25 16:10:10 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 16:10:10 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 8, error status: 2

2021-02-25 16:10:22 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 16:10:22 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 9, error status: 2

2021-02-25 16:11:05 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 16:11:06 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 16:11:08 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 16:11:10 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 16:11:11 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 16:11:13 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 20 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 16:38:34 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 16:38:34 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 16:38:46 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 16:38:46 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 16:38:58 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 16:38:58 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 16:39:10 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 16:39:10 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 4, error status: 2

2021-02-25 16:39:53 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 16:39:55 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 16:39:56 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 16:39:58 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 16:40:00 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 16:40:01 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 16:43:10 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 16:43:10 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 16:43:53 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 16:43:55 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 16:43:57 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 16:43:58 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 16:44:00 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 16:44:02 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 17:14:15 driver-btm-soc.c:3731:check_system_work: The avg rate is 15400 in 30 mins, PCB temperature between 26 ~ 53 ideal_hash_rate_fixed 15000

ENV 20 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3120

2021-02-25 17:44:57 driver-btm-soc.c:3731:check_system_work: The avg rate is 15344 in 30 mins, PCB temperature between 25 ~ 53 ideal_hash_rate_fixed 15000

ENV 19 FAN 3180

ENV 20 FAN 3120

ENV 19 FAN 3120

ENV 19 FAN 3180

2021-02-25 18:01:36 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 18:01:36 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 18:02:19 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 18:02:21 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 18:02:23 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 18:02:24 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 18:02:26 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 18:02:27 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3480

2021-02-25 18:09:36 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 18:09:36 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 18:09:48 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 18:09:48 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 18:10:00 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 18:10:00 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 18:10:42 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 18:10:44 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 18:10:46 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 18:10:47 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 18:10:49 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 18:10:50 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 19 FAN 3840

ENV 19 FAN 3780

ENV 19 FAN 3480

ENV 19 FAN 3360

ENV 23 FAN 3720

2021-02-25 18:35:59 driver-btm-soc.c:3834:check_system_work: input temperature is not stable 1.0.

2021-02-25 18:41:07 driver-btm-soc.c:3731:check_system_work: The avg rate is 15386 in 30 mins, PCB temperature between 28 ~ 53 ideal_hash_rate_fixed 15000

ENV 22 FAN 4140

ENV 22 FAN 4140

ENV 22 FAN 4080

ENV 22 FAN 4140

ENV 21 FAN 4200

ENV 21 FAN 4200

2021-02-25 19:11:50 driver-btm-soc.c:3731:check_system_work: The avg rate is 15478 in 30 mins, PCB temperature between 27 ~ 53 ideal_hash_rate_fixed 15000

ENV 21 FAN 4260

ENV 21 FAN 4260

ENV 22 FAN 4200

2021-02-25 19:23:26 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 19:23:26 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2

2021-02-25 19:23:38 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 19:23:38 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2

2021-02-25 19:23:50 temperature.c:1126:update_error_status: Fatal Error: network connection lost!

2021-02-25 19:23:50 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 3, error status: 2

2021-02-25 19:24:33 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 19:24:34 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 19:24:36 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!

2021-02-25 19:24:38 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 19:24:39 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

2021-02-25 19:24:41 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!

ENV 21 FAN 4200

ENV 21 FAN 4200

ENV 21 FAN 4200

ENV 21 FAN 4200

ENV 21 FAN 4200

2021-02-25 19:54:55 driver-btm-soc.c:3731:check_system_work: The avg rate is 15448 in 30 mins, PCB temperature between 28 ~ 53 ideal_hash_rate_fixed 15000

ENV 22 FAN 4200

ENV 21 FAN 4260

ENV 22 FAN 4260

ENV 20 FAN 4200

ENV 21 FAN 4200

ENV 22 FAN 4200

2021-02-25 20:25:39 driver-btm-soc.c:3731:check_system_work: The avg rate is 15400 in 30 mins, PCB temperature between 27 ~ 53 ideal_hash_rate_fixed 15000

ENV 21 FAN 4380

ENV 23 FAN 4200

ENV 22 FAN 4200

ENV 22 FAN 4140

ENV 22 FAN 4080

ENV 21 FAN 4260

2021-02-25 20:56:22 driver-btm-soc.c:3731:check_system_work: The avg rate is 15297 in 30 mins, PCB temperature between 28 ~ 53 ideal_hash_rate_fixed 15000

ENV 22 FAN 4200

ENV 22 FAN 4260
0

评论操作固定链接
windhe123456

2021年03月15日 12:46
Hello!
You can try to use SD card to restore the factory, if there is still a problem, you can provide your mailbox, I will send you antivirus software to try.
0

评论操作固定链接
Uriy

2021年08月18日 14:41
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 197340K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32036K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 18996K (cc873000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 237/115, WL threshold: 4096, image sequence number: 1596842440
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 87F8A12C-2DDA-4FE9-8E2A-47A1DEEADE97, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 10726/8652, WL threshold: 4096, image sequence number: 2070294037
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID BC37FF72-0B60-4E7C-B4B9-87BE5B344DB8, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab01b
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
[2021-08-18 14:18:12.237] start listen on 6060 ...
[2021-08-18 14:26:29.491] set_start_time_point total_tv_start_sys=567 total_tv_end_sys=568

2021-08-18 14:17:42 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2021-08-18 14:17:42 driver-btm-soc.c:8125:bitmain_soc_init: T15
2021-08-18 14:17:42 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2021-08-18 14:17:42 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2021-08-18 14:17:42 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=true
2021-08-18 14:17:42 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2021-08-18 14:17:42 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2021-08-18 14:17:42 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2021-08-18 14:17:42 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:46:16 CST 2019 type: Antminer T15
2021-08-18 14:17:42 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:53:57
2021-08-18 14:17:42 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2021-08-18 14:17:44 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 81100d4a5c20881c
2021-08-18 14:17:44 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B
2021-08-18 14:17:44 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0x7
2021-08-18 14:17:44 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2021-08-18 14:17:44 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist
2021-08-18 14:17:44 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist
2021-08-18 14:17:52 eeprom.c:1418:eeprom_load: done
2021-08-18 14:17:52 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0101
2021-08-18 14:17:52 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0100
2021-08-18 14:17:52 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0101
2021-08-18 14:17:52 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0100
2021-08-18 14:17:52 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0101
2021-08-18 14:17:52 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0100
2021-08-18 14:17:52 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2021-08-18 14:17:57 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2021-08-18 14:17:57 dspic33ep16gs202.c:538:reset_pic: chain[1] ok
2021-08-18 14:18:02 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok
2021-08-18 14:18:02 dspic33ep16gs202.c:538:reset_pic: chain[2] ok
2021-08-18 14:18:07 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[2] ok
2021-08-18 14:18:07 power.c:137:power_init: power init ...
2021-08-18 14:18:07 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 2
2021-08-18 14:18:07 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 1
2021-08-18 14:18:07 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 0
2021-08-18 14:18:07 power.c:114:power_on: init gpio907
2021-08-18 14:18:09 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-08-18 14:18:10 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2021-08-18 14:18:10 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!
2021-08-18 14:18:13 driver-btm-soc.c:8241:bitmain_soc_init: Enter 30s sleep to make sure power release finish.
2021-08-18 14:18:43 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[0] = 18.800000
2021-08-18 14:18:43 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[1] = 18.800000
2021-08-18 14:18:43 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[2] = 18.800000
2021-08-18 14:18:43 driver-btm-soc.c:7630:set_working_voltage_by_eeprom: max = 18.80, min = 18.80
2021-08-18 14:18:43 power.c:149:set_working_voltage: working_voltage = 18.800000
2021-08-18 14:18:43 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-08-18 14:18:43 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2021-08-18 14:18:44 eeprom.c:840:travel_eeprom_store: chain[0] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:425 IC[001]:425 IC[002]:410 IC[003]:395 IC[004]:425
IC[005]:425 IC[006]:395 IC[007]:425 IC[008]:410 IC[009]:425
IC[010]:425 IC[011]:410 IC[012]:425 IC[013]:395 IC[014]:425
IC[015]:395 IC[016]:410 IC[017]:425 IC[018]:425 IC[019]:425
IC[020]:425 IC[021]:395 IC[022]:425 IC[023]:425 IC[024]:410
IC[025]:410 IC[026]:425 IC[027]:395 IC[028]:425 IC[029]:425
IC[030]:425 IC[031]:425 IC[032]:425 IC[033]:410 IC[034]:395
IC[035]:395 IC[036]:410 IC[037]:425 IC[038]:425 IC[039]:425
IC[040]:425 IC[041]:410 IC[042]:425 IC[043]:425 IC[044]:395
IC[045]:425 IC[046]:410 IC[047]:395 IC[048]:425 IC[049]:425
IC[050]:425 IC[051]:425 IC[052]:425 IC[053]:410 IC[054]:395
IC[055]:410 IC[056]:425 IC[057]:395 IC[058]:425 IC[059]:425
voltage: 18.80 V
hash rate: 06348 GH/s

freq data per ASIC in mode2:
IC[000]:500 IC[001]:500 IC[002]:500 IC[003]:470 IC[004]:485
IC[005]:500 IC[006]:470 IC[007]:500 IC[008]:500 IC[009]:485
IC[010]:500 IC[011]:485 IC[012]:500 IC[013]:470 IC[014]:500
IC[015]:470 IC[016]:485 IC[017]:500 IC[018]:500 IC[019]:500
IC[020]:500 IC[021]:485 IC[022]:500 IC[023]:500 IC[024]:470
IC[025]:485 IC[026]:500 IC[027]:470 IC[028]:500 IC[029]:500
IC[030]:500 IC[031]:485 IC[032]:500 IC[033]:500 IC[034]:470
IC[035]:470 IC[036]:485 IC[037]:500 IC[038]:500 IC[039]:500
IC[040]:500 IC[041]:500 IC[042]:485 IC[043]:500 IC[044]:470
IC[045]:500 IC[046]:470 IC[047]:485 IC[048]:500 IC[049]:500
IC[050]:485 IC[051]:500 IC[052]:500 IC[053]:500 IC[054]:470
IC[055]:470 IC[056]:500 IC[057]:500 IC[058]:485 IC[059]:500
voltage in mode2: 19.50 V
hash rate in mode2: 07527 GH/s

2021-08-18 14:18:44 eeprom.c:840:travel_eeprom_store: chain[1] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:425 IC[001]:425 IC[002]:425 IC[003]:425 IC[004]:410
IC[005]:425 IC[006]:425 IC[007]:410 IC[008]:425 IC[009]:425
IC[010]:425 IC[011]:425 IC[012]:410 IC[013]:425 IC[014]:425
IC[015]:425 IC[016]:410 IC[017]:425 IC[018]:425 IC[019]:425
IC[020]:425 IC[021]:425 IC[022]:425 IC[023]:425 IC[024]:410
IC[025]:425 IC[026]:410 IC[027]:425 IC[028]:425 IC[029]:425
IC[030]:425 IC[031]:425 IC[032]:425 IC[033]:410 IC[034]:425
IC[035]:425 IC[036]:410 IC[037]:425 IC[038]:425 IC[039]:425
IC[040]:425 IC[041]:425 IC[042]:425 IC[043]:425 IC[044]:410
IC[045]:410 IC[046]:425 IC[047]:425 IC[048]:425 IC[049]:425
IC[050]:425 IC[051]:425 IC[052]:410 IC[053]:425 IC[054]:425
IC[055]:425 IC[056]:425 IC[057]:410 IC[058]:425 IC[059]:425
voltage: 18.80 V
hash rate: 06432 GH/s

freq data per ASIC in mode2:
IC[000]:510 IC[001]:510 IC[002]:510 IC[003]:480 IC[004]:495
IC[005]:510 IC[006]:495 IC[007]:480 IC[008]:510 IC[009]:510
IC[010]:510 IC[011]:495 IC[012]:480 IC[013]:510 IC[014]:510
IC[015]:495 IC[016]:480 IC[017]:510 IC[018]:510 IC[019]:510
IC[020]:510 IC[021]:510 IC[022]:510 IC[023]:495 IC[024]:480
IC[025]:510 IC[026]:480 IC[027]:510 IC[028]:510 IC[029]:495
IC[030]:510 IC[031]:510 IC[032]:480 IC[033]:495 IC[034]:510
IC[035]:510 IC[036]:480 IC[037]:495 IC[038]:510 IC[039]:510
IC[040]:510 IC[041]:510 IC[042]:510 IC[043]:495 IC[044]:480
IC[045]:480 IC[046]:495 IC[047]:510 IC[048]:510 IC[049]:510
IC[050]:510 IC[051]:510 IC[052]:495 IC[053]:510 IC[054]:480
IC[055]:480 IC[056]:510 IC[057]:495 IC[058]:510 IC[059]:510
voltage in mode2: 19.50 V
hash rate in mode2: 07656 GH/s

2021-08-18 14:18:44 eeprom.c:840:travel_eeprom_store: chain[2] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:410 IC[001]:395 IC[002]:410 IC[003]:410 IC[004]:380
IC[005]:410 IC[006]:410 IC[007]:410 IC[008]:395 IC[009]:380
IC[010]:410 IC[011]:410 IC[012]:410 IC[013]:395 IC[014]:380
IC[015]:410 IC[016]:410 IC[017]:410 IC[018]:395 IC[019]:380
IC[020]:410 IC[021]:410 IC[022]:395 IC[023]:410 IC[024]:380
IC[025]:410 IC[026]:410 IC[027]:410 IC[028]:395 IC[029]:380
IC[030]:410 IC[031]:410 IC[032]:410 IC[033]:395 IC[034]:380
IC[035]:380 IC[036]:410 IC[037]:410 IC[038]:410 IC[039]:395
IC[040]:395 IC[041]:410 IC[042]:410 IC[043]:410 IC[044]:380
IC[045]:410 IC[046]:410 IC[047]:410 IC[048]:395 IC[049]:380
IC[050]:410 IC[051]:395 IC[052]:410 IC[053]:380 IC[054]:410
IC[055]:410 IC[056]:410 IC[057]:410 IC[058]:395 IC[059]:380
voltage: 18.80 V
hash rate: 06107 GH/s

freq data per ASIC in mode2:
IC[000]:480 IC[001]:465 IC[002]:480 IC[003]:465 IC[004]:450
IC[005]:480 IC[006]:480 IC[007]:465 IC[008]:450 IC[009]:465
IC[010]:480 IC[011]:480 IC[012]:465 IC[013]:465 IC[014]:450
IC[015]:480 IC[016]:450 IC[017]:480 IC[018]:465 IC[019]:465
IC[020]:480 IC[021]:480 IC[022]:465 IC[023]:465 IC[024]:450
IC[025]:480 IC[026]:480 IC[027]:465 IC[028]:465 IC[029]:450
IC[030]:480 IC[031]:465 IC[032]:480 IC[033]:465 IC[034]:450
IC[035]:450 IC[036]:480 IC[037]:480 IC[038]:465 IC[039]:465
IC[040]:465 IC[041]:480 IC[042]:480 IC[043]:465 IC[044]:450
IC[045]:480 IC[046]:480 IC[047]:465 IC[048]:465 IC[049]:450
IC[050]:480 IC[051]:465 IC[052]:480 IC[053]:450 IC[054]:465
IC[055]:480 IC[056]:480 IC[057]:450 IC[058]:465 IC[059]:465
voltage in mode2: 19.50 V
hash rate in mode2: 07152 GH/s

2021-08-18 14:18:45 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2021-08-18 14:18:45 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-08-18 14:18:48 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:18:51 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-08-18 14:18:51 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2021-08-18 14:18:51 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:18:51 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:18:51 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:18:52 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:18:52 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:18:53 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:18:53 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:18:54 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:18:54 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-08-18 14:18:57 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:19:01 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 50
2021-08-18 14:19:01 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2021-08-18 14:19:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:19:03 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:19:03 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:19:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:19:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:19:06 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:19:06 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:19:07 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:19:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-08-18 14:19:10 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:19:15 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 50
2021-08-18 14:19:15 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2021-08-18 14:19:15 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:19:17 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:19:17 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:19:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:19:20 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:19:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:19:23 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:19:26 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:19:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-08-18 14:19:29 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:19:34 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 50
2021-08-18 14:19:34 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [0] times, power off hash board and wait [30] sec
2021-08-18 14:19:34 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-08-18 14:20:04 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-08-18 14:20:05 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2021-08-18 14:20:06 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2021-08-18 14:20:08 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2021-08-18 14:20:08 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2021-08-18 14:20:08 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:20:09 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:20:09 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:20:09 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:20:09 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:20:10 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:20:10 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:20:11 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:20:11 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-08-18 14:20:14 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:20:18 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 50
2021-08-18 14:20:18 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2021-08-18 14:20:18 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:20:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:20:20 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:20:21 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:20:21 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:20:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:20:23 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:20:24 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:20:24 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-08-18 14:20:27 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:20:32 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 50
2021-08-18 14:20:32 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2021-08-18 14:20:32 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:20:35 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:20:35 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:20:37 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:20:37 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:20:40 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:20:40 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:20:43 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:20:43 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-08-18 14:20:46 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:20:51 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 50
2021-08-18 14:20:51 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [1] times, power off hash board and wait [30] sec
2021-08-18 14:20:51 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-08-18 14:21:21 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-08-18 14:21:22 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2021-08-18 14:21:22 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2021-08-18 14:21:24 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 2
2021-08-18 14:21:24 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2021-08-18 14:21:24 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:21:25 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:21:25 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:21:26 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:21:26 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:21:27 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:21:27 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:21:27 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:21:27 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-08-18 14:21:30 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:21:35 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 50
2021-08-18 14:21:35 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2021-08-18 14:21:35 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:21:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:21:36 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:21:38 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:21:38 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:21:39 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:21:39 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:21:41 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:21:41 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-08-18 14:21:44 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:21:48 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 50
2021-08-18 14:21:48 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2021-08-18 14:21:48 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:21:51 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:21:51 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:21:54 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:21:54 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:21:57 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:21:57 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:22:00 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:22:00 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-08-18 14:22:03 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:22:07 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 50
2021-08-18 14:22:07 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [2] times, power off hash board and wait [30] sec
2021-08-18 14:22:08 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-08-18 14:22:38 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-08-18 14:22:38 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2021-08-18 14:22:39 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2021-08-18 14:22:41 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 3
2021-08-18 14:22:41 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2021-08-18 14:22:41 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:22:42 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:22:42 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:22:42 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:22:42 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:22:43 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:22:43 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:22:44 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:22:44 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-08-18 14:22:47 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:22:51 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 50
2021-08-18 14:22:51 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2021-08-18 14:22:51 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:22:53 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:22:53 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:22:54 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:22:54 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:22:56 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:22:56 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:22:57 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:22:57 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-08-18 14:23:00 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:23:05 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 50
2021-08-18 14:23:05 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2021-08-18 14:23:05 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:23:08 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:23:08 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:23:11 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:23:11 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:23:13 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:23:13 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:23:16 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-08-18 14:23:16 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-08-18 14:23:19 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:23:24 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 50
2021-08-18 14:23:24 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [3] times, power off hash board and wait [30] sec
2021-08-18 14:23:25 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-08-18 14:23:55 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-08-18 14:23:55 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2021-08-18 14:23:56 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2021-08-18 14:23:58 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-08-18 14:23:58 driver-btm-soc.c:7220:check_asic_num_by_force_open_core: removed chain 0 due to asic num error
2021-08-18 14:23:59 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1!
2021-08-18 14:23:59 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:24:02 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-08-18 14:24:05 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-08-18 14:24:05 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 1
2021-08-18 14:24:05 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:24:06 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-08-18 14:24:06 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:24:06 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-08-18 14:24:06 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:24:07 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-08-18 14:24:07 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:24:08 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-08-18 14:24:08 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-08-18 14:24:11 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-08-18 14:24:14 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 60
2021-08-18 14:24:15 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2!
2021-08-18 14:24:15 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-08-18 14:24:18 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-08-18 14:24:21 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-08-18 14:24:21 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 2
2021-08-18 14:24:21 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:24:21 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-08-18 14:24:21 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:24:22 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-08-18 14:24:22 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:24:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-08-18 14:24:23 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:24:24 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-08-18 14:24:24 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-08-18 14:24:27 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-08-18 14:24:30 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 60
2021-08-18 14:24:30 driver-btm-soc.c:7238:balance_domain_voltage: To balance voltage domain, open all core and reset hash board after find asic num.
2021-08-18 14:24:30 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 1
2021-08-18 14:24:30 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:24:31 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-08-18 14:24:31 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-08-18 14:24:34 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-08-18 14:24:37 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 2
2021-08-18 14:24:37 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:24:37 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-08-18 14:24:37 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-08-18 14:24:40 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-08-18 14:24:43 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 1
2021-08-18 14:24:43 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:24:45 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-08-18 14:24:45 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-08-18 14:24:48 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-08-18 14:24:51 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 2
2021-08-18 14:24:51 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-08-18 14:24:52 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-08-18 14:24:52 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-08-18 14:24:55 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-08-18 14:24:58 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 1
2021-08-18 14:24:58 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:25:01 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-08-18 14:25:01 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2021-08-18 14:25:04 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-08-18 14:25:07 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 2
2021-08-18 14:25:07 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-08-18 14:25:10 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-08-18 14:25:10 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2021-08-18 14:25:13 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2021-08-18 14:25:23 driver-btm-soc.c:7475:calculate_timeout: dev->timeout = 857
2021-08-18 14:25:23 driver-btm-soc.c:3012:set_baud: set baud=1
2021-08-18 14:25:23 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-08-18 14:25:24 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2021-08-18 14:25:24 driver-btm-soc.c:3023:set_baud: read bc write is 0x82001a
2021-08-18 14:25:24 driver-btm-soc.c:4076:set_clock_delay_control: core_data = 0x04
2021-08-18 14:25:24 driver-btm-soc.c:8293:bitmain_soc_init: Open 1/4 core for reading temperature.
2021-08-18 14:25:24 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-08-18 14:25:24 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2021-08-18 14:25:25 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2021-08-18 14:25:25 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-08-18 14:25:25 temperature.c:422:calibration_sensor_offset: chain[1] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 15 11 45 41 0 0 0 0
sensor offset: 0 0 0 0 0 0 0 0
2021-08-18 14:25:25 temperature.c:448:calibration_sensor_offset: chain[1] temp chip I2C addr=0x98
2021-08-18 14:25:25 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-08-18 14:25:25 temperature.c:531:calibration_sensor_offset: Warning: Chain[1] has no temp info ! we will fix it
2021-08-18 14:25:25 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093818, cmd_buf[1]=0x6131, cmd_buf[2]=0x2000000, misc=0x6131
2021-08-18 14:25:26 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[14]
2021-08-18 14:25:26 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[14] get middle temp offset=-5 typeID=55
2021-08-18 14:25:26 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092818, cmd_buf[1]=0x6131, cmd_buf[2]=0x1000000, misc=0x6131
2021-08-18 14:25:27 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[10]
2021-08-18 14:25:27 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[10] get middle temp offset=-5 typeID=55
2021-08-18 14:25:27 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109b018, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-08-18 14:25:27 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[44]
2021-08-18 14:25:28 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[44] get middle temp offset=-5 typeID=55
2021-08-18 14:25:28 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109a018, cmd_buf[1]=0x6131, cmd_buf[2]=0xa000000, misc=0x6131
2021-08-18 14:25:28 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[40]
2021-08-18 14:25:29 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-5 typeID=55
2021-08-18 14:25:29 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-08-18 14:25:29 temperature.c:422:calibration_sensor_offset: chain[2] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 15 11 45 41 0 0 0 0
sensor offset: 0 0 0 0 0 0 0 0
2021-08-18 14:25:29 temperature.c:448:calibration_sensor_offset: chain[2] temp chip I2C addr=0x98
2021-08-18 14:25:29 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0
2021-08-18 14:25:29 temperature.c:531:calibration_sensor_offset: Warning: Chain[2] has no temp info ! we will fix it
2021-08-18 14:25:29 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093818, cmd_buf[1]=0x6131, cmd_buf[2]=0x2000000, misc=0x6131
2021-08-18 14:25:29 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[14]
2021-08-18 14:25:30 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[14] get middle temp offset=-5 typeID=55
2021-08-18 14:25:30 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092818, cmd_buf[1]=0x6131, cmd_buf[2]=0x1000000, misc=0x6131
2021-08-18 14:25:30 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[10]
2021-08-18 14:25:31 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[10] get middle temp offset=-5 typeID=55
2021-08-18 14:25:31 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109b018, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2021-08-18 14:25:31 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[44]
2021-08-18 14:25:32 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[44] get middle temp offset=-5 typeID=55
2021-08-18 14:25:32 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109a018, cmd_buf[1]=0x6131, cmd_buf[2]=0xa000000, misc=0x6131
2021-08-18 14:25:32 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[40]
2021-08-18 14:25:33 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[40] get middle temp offset=-5 typeID=55
2021-08-18 14:25:35 temperature.c:589:do_calibration_temperature_sensor: bring up lowest temperature is 40
ENV 40 FAN 5940
2021-08-18 14:25:40 driver-btm-soc.c:8298:bitmain_soc_init: Boot environment temperature is 40
2021-08-18 14:25:40 driver-btm-soc.c:8308:bitmain_soc_init: set TICKET_MASK
2021-08-18 14:25:40 driver-btm-soc.c:4130:open_core_bm1391: Start Open Core!!
2021-08-18 14:25:45 driver-btm-soc.c:4202:open_core_bm1391: End Open Core!!
2021-08-18 14:25:45 freq_tuning.c:312:freq_tuning_get_max_freq: Max freq of tuning is 505
ENV 40 FAN 5940
2021-08-18 14:25:45 power.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 18.80 ...
2021-08-18 14:25:45 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[29] = 19.804182
2021-08-18 14:25:45 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.000000
2021-08-18 14:25:46 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[41] = 19.603953
2021-08-18 14:25:46 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.804182
2021-08-18 14:25:47 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[53] = 19.403724
2021-08-18 14:25:47 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.603953
2021-08-18 14:25:48 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[65] = 19.203496
2021-08-18 14:25:48 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.403724
2021-08-18 14:25:49 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[77] = 19.003267
2021-08-18 14:25:49 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.203496
2021-08-18 14:25:50 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[79] = 18.969896
2021-08-18 14:25:50 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.003267
2021-08-18 14:25:51 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[81] = 18.936524
2021-08-18 14:25:51 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.969896
2021-08-18 14:25:52 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[83] = 18.903153
2021-08-18 14:25:52 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.936524
2021-08-18 14:25:53 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[85] = 18.869782
2021-08-18 14:25:53 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.903153
2021-08-18 14:25:54 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[87] = 18.836410
2021-08-18 14:25:54 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.869782
2021-08-18 14:25:55 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[88] = 18.819724
2021-08-18 14:25:55 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.836410
2021-08-18 14:25:56 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[89] = 18.803039
2021-08-18 14:25:56 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 18.819724
2021-08-18 14:25:57 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 1. to 410
2021-08-18 14:25:57 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 125.00M
2021-08-18 14:25:58 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 150.00M
2021-08-18 14:25:59 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 175.00M
2021-08-18 14:26:00 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 200.00M
2021-08-18 14:26:01 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 225.00M
2021-08-18 14:26:02 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 250.00M
2021-08-18 14:26:03 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 275.00M
2021-08-18 14:26:04 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 300.00M
2021-08-18 14:26:05 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 325.00M
2021-08-18 14:26:07 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 350.00M
2021-08-18 14:26:08 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 375.00M
2021-08-18 14:26:09 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 400.00M
2021-08-18 14:26:10 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 410.00M
2021-08-18 14:26:13 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 2. to 380
2021-08-18 14:26:13 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 125.00M
2021-08-18 14:26:14 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 150.00M
2021-08-18 14:26:15 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 175.00M
2021-08-18 14:26:16 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 200.00M
2021-08-18 14:26:17 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 225.00M
2021-08-18 14:26:18 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 250.00M
2021-08-18 14:26:19 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 275.00M
2021-08-18 14:26:20 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 300.00M
2021-08-18 14:26:21 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 325.00M
2021-08-18 14:26:22 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 350.00M
2021-08-18 14:26:23 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 375.00M
2021-08-18 14:26:24 driver-btm-soc.c:4963:increase_freq_slowly:

Increase frequency to 380.00M
2021-08-18 14:26:28 driver-btm-soc.c:6051:set_timeout: freq 410 final timeout=575
ENV 40 FAN 5940
2021-08-18 14:26:28 freq_tuning.c:621:freq_tuning_prepare_works: Fail to open test pattern file /dev/91602_pattern_60.txt.
2021-08-18 14:26:28 freq_tuning.c:3090:do_pre_test_for_user_mode: Pre-test cost 0s.
2021-08-18 14:26:30 power.c:458:get_chain_voltage: chain[1], voltage is: 18.85
2021-08-18 14:26:30 power.c:458:get_chain_voltage: chain[2], voltage is: 18.93
2021-08-18 14:26:30 power.c:482:get_average_voltage: average voltage is: 18.89
2021-08-18 14:26:30 driver-btm-soc.c:8387:bitmain_soc_init: Init done!
2021-08-18 14:26:30 driver-btm-soc.c:8389:bitmain_soc_init: ideal_hash_rate_fixed 12500
2021-08-18 14:26:30 temperature.c:1087:read_temp_func: bring_up_pcb_temp = 42
2021-08-18 14:26:31 driver-btm-soc.c:8823:send_job: Version num 1
2021-08-18 14:26:59 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-08-18 14:27:00 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-08-18 14:27:02 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2021-08-18 14:27:03 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-08-18 14:27:05 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2021-08-18 14:27:07 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
ENV 38 FAN 5940
0

评论操作固定链接
Uriy

2021年08月18日 14:42
What's the problem?
0

评论操作固定链接
Uriy

2021年08月18日 14:55
Менял местами кабеля и Hash-board не работает только та ,которая подключена первой
0

评论操作固定链接
antoine

2022年10月27日 15:35
hello
I have a T15
if I plug in one hasboard whatever the slot the asic works
if I connect two hasboard whatever the configuration it also works

on the other hand, when I connect the three hasboard the asic is in error.
I updated every time and can't seem to find the solution.
Can you help me ?

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 197340K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32036K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 18996K (cc873000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 21/11, WL threshold: 4096, image sequence number: 719460826
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 140EDF56-7A7A-4D3C-8F81-7B09823F77FE, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 4346/1821, WL threshold: 4096, image sequence number: 2131762174
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 4DFC1EAD-B563-4011-9C80-029C87E3B151, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab01b
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
[2022-10-27 15:33:57.889] start listen on 6060 ...
[2022-10-27 15:34:29.384] Probing for an alive pool
[2022-10-27 15:34:29.385] initiate_stratum
[2022-10-27 15:34:29.386] initiate_stratum
[2022-10-27 15:34:29.388] initiate_stratum
[2022-10-27 15:34:29.486] LOW POWER MODE!
[2022-10-27 15:34:29.487] Pool 0 difficulty changed to 65536
[2022-10-27 15:34:29.487] LOW POWER MODE!
[2022-10-27 15:34:29.488] in stratum_sthread
[2022-10-27 15:34:29.489] Pool 2 difficulty changed to 65536
[2022-10-27 15:34:29.490] Network diff set to 36.8T
[2022-10-27 15:34:29.490] in stratum_sthread
[2022-10-27 15:34:29.494] LOW POWER MODE!
[2022-10-27 15:34:29.495] in stratum_sthread
[2022-10-27 15:34:29.495] Pool 1 difficulty changed to 65536
[2022-10-27 15:34:29.510] POOL 0 support ab mode!
[2022-10-27 15:34:30.386] signal_work_update set work_update true
[2022-10-27 15:34:30.388] API: ignored invalid IPv4 address 'W:*' (as ::ffff:*.0.0.0)
[2022-10-27 15:34:35.389] API running in IP access mode on port 4028 (10)
2022-10-27 15:33:27 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2022-10-27 15:33:27 driver-btm-soc.c:8125:bitmain_soc_init: T15
2022-10-27 15:33:27 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2022-10-27 15:33:27 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2022-10-27 15:33:27 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2022-10-27 15:33:27 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2022-10-27 15:33:27 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2022-10-27 15:33:27 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2022-10-27 15:33:27 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:46:16 CST 2019 type: Antminer T15
2022-10-27 15:33:27 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:53:57
2022-10-27 15:33:27 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2022-10-27 15:33:29 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 807494025c20885c
2022-10-27 15:33:29 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B
2022-10-27 15:33:29 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0x7
2022-10-27 15:33:29 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2022-10-27 15:33:29 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist
2022-10-27 15:33:29 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist
2022-10-27 15:33:37 eeprom.c:1418:eeprom_load: done
2022-10-27 15:33:37 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0101
2022-10-27 15:33:37 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0100
2022-10-27 15:33:37 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0101
2022-10-27 15:33:37 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0100
2022-10-27 15:33:37 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0101
2022-10-27 15:33:37 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0100
2022-10-27 15:33:38 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2022-10-27 15:33:42 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2022-10-27 15:33:43 dspic33ep16gs202.c:538:reset_pic: chain[1] ok
2022-10-27 15:33:47 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok
2022-10-27 15:33:48 dspic33ep16gs202.c:538:reset_pic: chain[2] ok
2022-10-27 15:33:53 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[2] ok
2022-10-27 15:33:53 power.c:137:power_init: power init ...
2022-10-27 15:33:53 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 2
2022-10-27 15:33:53 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 0
2022-10-27 15:33:53 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 1
2022-10-27 15:33:53 power.c:114:power_on: init gpio907
2022-10-27 15:33:55 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-10-27 15:33:55 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2022-10-27 15:33:56 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!
2022-10-27 15:33:59 driver-btm-soc.c:8241:bitmain_soc_init: Enter 30s sleep to make sure power release finish.
2022-10-27 15:34:29 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[0] = 19.300000
2022-10-27 15:34:29 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[1] = 19.300000
2022-10-27 15:34:29 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[2] = 20.000000
2022-10-27 15:34:29 driver-btm-soc.c:7630:set_working_voltage_by_eeprom: max = 20.00, min = 19.30
2022-10-27 15:34:29 driver-btm-soc.c:7648:set_working_voltage_by_eeprom: Voltages are too different in the eeprom. Will exit.
2022-10-27 15:34:29 util.c:2200:process_version_mask: Pool 0 Verion num is 2
2022-10-27 15:34:30 driver-btm-soc.c:8823:send_job: Version num 2
0

评论操作固定链接

请先登录再写评论。

评论

没有找到您要找的？