S9k don't work

关注
Eleazar Villanueva
Every time the miner restarts it detects a different number of chips in the hashboards, sometimes it marks 60 h it works, sometimes it marks 50 and it does not work, sometimes it marks 0 or 1 and it does not work. And every time it restarts it is the same case! The 3 hashboards never detect the total of their chips, sometimes two detect 60 but one detects 1 or 0 or simply 1 detects 60 and the other two nothing
0

评论

12 条评论

日期 投票数
  • Luke HAO-Technical Specialist

    Hello，Eleazar

    The failure information is missing chips，by your description，then it needs to be repaired.

    0
    评论操作 固定链接
  • Eleazar Villanueva

    how do i know what to repair? where can i send it? I live in Mexico, do you have a manual? how can I attach photos for a more ideal orientation?

    0
    评论操作 固定链接
  • Luke HAO-Technical Specialist

    Hi Eleazar

    You can participate in the online maintenance training of Ant Training Academy to learn how to repair the miners.

    0
    评论操作 固定链接
  • Eleazar Villanueva

    Can you please give me the link?

    0
    评论操作 固定链接
  • Luke HAO-Technical Specialist

    Hi Eleazar

    Register an account on our website, log in, the article in the link I sent has a registration link and operation steps for online maintenance training.

    0
    评论操作 固定链接
  • Eleazar Villanueva

    Ok perfect, I have another situation, I have several miners that turn on fine but minutes later the hashrate drops to 0

    0
    评论操作 固定链接
  • Luke HAO-Technical Specialist

    Hey Eleazar

    Please post the kernel logs of these miners here for us to do troubleshooting，thank you very much！

    0
    评论操作 固定链接
  • Eleazar Villanueva

    This is one, works good a few hours but after four five hours starts the problems

     

     

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203784K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25592K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12552K (ccebe000 - cdb00000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAGAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1487966482
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID AAA482AE-BCD8-4301-B8C6-B2AC4F218515, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 456/124, WL threshold: 4096, image sequence number: 914180297
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID BCBDE5E0-4C0B-4978-9734-FC58D9F68227, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xab00d
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    [2020-12-17 20:19:52.013] httpListenThread start ret=0
    [2020-12-17 20:20:22.013] start listen on 6060 ...
    [2020-12-17 20:24:50.527] setStartTimePoint total_tv_start_sys=338 total_tv_end_sys=339

    2020-12-17 20:19:51 cgminer.c:11470:cnt_of_proc: pidof cgminer command result is:1198

    2020-12-17 20:19:51 cgminer.c:11471:cnt_of_proc: strlen is: 5
    2020-12-17 20:19:51 cgminer.c:11492:cnt_of_proc: Parsed proc id is: 1198
    2020-12-17 20:19:51 cgminer.c:11504:cnt_of_proc: 1 instance of cgminer is already Running on this machine
    2020-12-17 20:19:51 driver-btm-soc.c:6311:bitmain_soc_init: This is Antminer S9k scan user version
    2020-12-17 20:19:52 driver-btm-soc.c:6317:bitmain_soc_init: special mode: disabled
    2020-12-17 20:19:52 driver-btm-soc.c:6324:bitmain_soc_init: This is high performance mode
    2020-12-17 20:19:52 driver-btm-soc.c:6329:bitmain_soc_init: last commit version: 94e8f08 commit time: 2019-10-31 10:33:22 build: 2019-12-13 10:14:11
    2020-12-17 20:19:52 driver-btm-soc.c:6350:bitmain_soc_init: Detect 256MB control board of XILINX
    2020-12-17 20:19:52 driver-btm-soc.c:6353:bitmain_soc_init: Miner compile time: Fri Dec 13 10:01:09 CST 2019 type: Antminer S9k
    2020-12-17 20:19:52 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7
    2020-12-17 20:19:52 driver-btm-soc.c:861:check_chain: !! chain[0]is exist
    2020-12-17 20:19:52 driver-btm-soc.c:861:check_chain: !! chain[1]is exist
    2020-12-17 20:19:52 driver-btm-soc.c:861:check_chain: !! chain[2]is exist
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fb 28 fc ff
    00000080 ff ff ff ff ff ff ff c8 4b 4b 4b 4b 4b 4b 4b 4b
    00000090 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000a0 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000b0 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000c0 4b 4b 4b 4b 00 ff ff ff ff ff ff ff ff ff ff ff
    000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000f0 ff ff ff ff 5b 11 00 00 80 ff ff ff 39 10 f1 a4
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fb 28 fc ff
    00000080 ff ff ff ff ff ff ff c8 4b 4b 4b 4b 4b 4b 4b 4b
    00000090 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000a0 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000b0 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000c0 4b 4b 4b 4b 00 ff ff ff ff ff ff ff ff ff ff ff
    000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000f0 ff ff ff ff ee 11 00 00 80 ff ff ff 39 10 e6 a3
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fb 28 fc ff
    00000080 ff ff ff ff ff ff ff c8 4d 4d 4d 4d 4d 4d 4d 4d
    00000090 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d
    000000a0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d
    000000b0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d
    000000c0 4d 4d 4d 4d 00 ff ff ff ff ff ff ff ff ff ff ff
    000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000f0 ff ff ff ff df 11 00 00 80 ff ff ff 39 10 df 76

    read chain[0] hardware info:
    major type: 0
    minor type: 0
    chip level: 2
    bom version: 0x10
    pcb version: 0x39
    fixture 8pattern result: L0

    read chain[1] hardware info:
    major type: 0
    minor type: 0
    chip level: 2
    bom version: 0x10
    pcb version: 0x39
    fixture 8pattern result: L0

    read chain[2] hardware info:
    major type: 0
    minor type: 0
    chip level: 2
    bom version: 0x10
    pcb version: 0x39
    fixture 8pattern result: L0

    sweep config for eco mode:
    sweep_start_voltage: 9.44
    max_aging_voltage: 9.84
    sweep_min_freq: 270M
    sweep_max_freq: 310M

    sweep config for hpf mode:
    sweep_start_voltage: 9.90
    max_aging_voltage: 10.30
    sweep_min_freq: 355M
    sweep_max_freq: 385M
    2020-12-17 20:20:04 driver-btm-soc.c:5770:get_freq_result_from_eeprom: orginal chip freq:
    chain 0 freq:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375

    chain 1 freq:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375

    chain 2 freq:
    385 385 385 385 385 385 385 385 385 385
    385 385 385 385 385 385 385 385 385 385
    385 385 385 385 385 385 385 385 385 385
    385 385 385 385 385 385 385 385 385 385
    385 385 385 385 385 385 385 385 385 385
    385 385 385 385 385 385 385 385 385 385

    2020-12-17 20:20:05 driver-btm-soc.c:6443:bitmain_soc_init: reset all...
    2020-12-17 20:20:07 driver-btm-soc.c:6451:bitmain_soc_init: miner ID : 815854442b10481c
    2020-12-17 20:20:07 driver-btm-soc.c:6112:init_miner_version: FPGA Version = 0xB00D
    2020-12-17 20:20:26 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[0] PIC software version: 177
    2020-12-17 20:20:27 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[1] PIC software version: 177
    2020-12-17 20:20:27 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177
    2020-12-17 20:20:27 power.c:185:power_init: power init ...
    2020-12-17 20:20:27 driver-btm-soc.c:4877:get_working_voltage_from_eeprom: get working vol [10.00] from chain[0] eeprom
    2020-12-17 20:20:27 power.c:232:set_working_voltage_by_chain: chain[0] working_voltage = 10.00
    2020-12-17 20:20:27 driver-btm-soc.c:4877:get_working_voltage_from_eeprom: get working vol [10.00] from chain[1] eeprom
    2020-12-17 20:20:27 power.c:232:set_working_voltage_by_chain: chain[1] working_voltage = 10.00
    2020-12-17 20:20:27 driver-btm-soc.c:4877:get_working_voltage_from_eeprom: get working vol [10.00] from chain[2] eeprom
    2020-12-17 20:20:27 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 10.00
    2020-12-17 20:20:27 driver-btm-soc.c:5560:update_highest_voltage: chain 0 hpf working voltage 10.00
    2020-12-17 20:20:27 driver-btm-soc.c:5560:update_highest_voltage: chain 1 hpf working voltage 10.00
    2020-12-17 20:20:27 driver-btm-soc.c:5560:update_highest_voltage: chain 2 hpf working voltage 10.00
    2020-12-17 20:20:27 driver-btm-soc.c:5569:update_highest_voltage: open core at max voltage 10.20
    2020-12-17 20:20:27 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 10.20 ...
    2020-12-17 20:20:30 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 20:20:30 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 10.20 ...
    2020-12-17 20:20:31 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 20:20:31 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.20 ...
    2020-12-17 20:20:32 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 20:20:32 driver-btm-soc.c:1259:get_ideal_hash_rate: get ideal hash rate 13500
    2020-12-17 20:20:32 eeprom.c:675:travel_eeprom_store: chain[0] data in eeprom is:
    magic number: 0x7e
    freq data per ASIC:
    IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275
    IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275
    IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275
    IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275
    IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275
    IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275
    voltage: 11.10 V
    hash rate: -0001 GH/s

    freq data per ASIC in mode2:
    IC[000]:375 IC[001]:375 IC[002]:375 IC[003]:375 IC[004]:375 IC[005]:375 IC[006]:375 IC[007]:375 IC[008]:375 IC[009]:375
    IC[010]:375 IC[011]:375 IC[012]:375 IC[013]:375 IC[014]:375 IC[015]:375 IC[016]:375 IC[017]:375 IC[018]:375 IC[019]:375
    IC[020]:375 IC[021]:375 IC[022]:375 IC[023]:375 IC[024]:375 IC[025]:375 IC[026]:375 IC[027]:375 IC[028]:375 IC[029]:375
    IC[030]:375 IC[031]:375 IC[032]:375 IC[033]:375 IC[034]:375 IC[035]:375 IC[036]:375 IC[037]:375 IC[038]:375 IC[039]:375
    IC[040]:375 IC[041]:375 IC[042]:375 IC[043]:375 IC[044]:375 IC[045]:375 IC[046]:375 IC[047]:375 IC[048]:375 IC[049]:375
    IC[050]:375 IC[051]:375 IC[052]:375 IC[053]:375 IC[054]:375 IC[055]:375 IC[056]:375 IC[057]:375 IC[058]:375 IC[059]:375
    voltage in mode2: 10.00 V
    hash rate in mode2: 04443 GH/s

    2020-12-17 20:20:32 eeprom.c:675:travel_eeprom_store: chain[1] data in eeprom is:
    magic number: 0x7e
    freq data per ASIC:
    IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275
    IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275
    IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275
    IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275
    IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275
    IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275
    voltage: 11.10 V
    hash rate: -0001 GH/s

    freq data per ASIC in mode2:
    IC[000]:375 IC[001]:375 IC[002]:375 IC[003]:375 IC[004]:375 IC[005]:375 IC[006]:375 IC[007]:375 IC[008]:375 IC[009]:375
    IC[010]:375 IC[011]:375 IC[012]:375 IC[013]:375 IC[014]:375 IC[015]:375 IC[016]:375 IC[017]:375 IC[018]:375 IC[019]:375
    IC[020]:375 IC[021]:375 IC[022]:375 IC[023]:375 IC[024]:375 IC[025]:375 IC[026]:375 IC[027]:375 IC[028]:375 IC[029]:375
    IC[030]:375 IC[031]:375 IC[032]:375 IC[033]:375 IC[034]:375 IC[035]:375 IC[036]:375 IC[037]:375 IC[038]:375 IC[039]:375
    IC[040]:375 IC[041]:375 IC[042]:375 IC[043]:375 IC[044]:375 IC[045]:375 IC[046]:375 IC[047]:375 IC[048]:375 IC[049]:375
    IC[050]:375 IC[051]:375 IC[052]:375 IC[053]:375 IC[054]:375 IC[055]:375 IC[056]:375 IC[057]:375 IC[058]:375 IC[059]:375
    voltage in mode2: 10.00 V
    hash rate in mode2: 04590 GH/s

    2020-12-17 20:20:33 eeprom.c:675:travel_eeprom_store: chain[2] data in eeprom is:
    magic number: 0x7e
    freq data per ASIC:
    IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275
    IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275
    IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275
    IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275
    IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275
    IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275
    voltage: 11.10 V
    hash rate: -0001 GH/s

    freq data per ASIC in mode2:
    IC[000]:385 IC[001]:385 IC[002]:385 IC[003]:385 IC[004]:385 IC[005]:385 IC[006]:385 IC[007]:385 IC[008]:385 IC[009]:385
    IC[010]:385 IC[011]:385 IC[012]:385 IC[013]:385 IC[014]:385 IC[015]:385 IC[016]:385 IC[017]:385 IC[018]:385 IC[019]:385
    IC[020]:385 IC[021]:385 IC[022]:385 IC[023]:385 IC[024]:385 IC[025]:385 IC[026]:385 IC[027]:385 IC[028]:385 IC[029]:385
    IC[030]:385 IC[031]:385 IC[032]:385 IC[033]:385 IC[034]:385 IC[035]:385 IC[036]:385 IC[037]:385 IC[038]:385 IC[039]:385
    IC[040]:385 IC[041]:385 IC[042]:385 IC[043]:385 IC[044]:385 IC[045]:385 IC[046]:385 IC[047]:385 IC[048]:385 IC[049]:385
    IC[050]:385 IC[051]:385 IC[052]:385 IC[053]:385 IC[054]:385 IC[055]:385 IC[056]:385 IC[057]:385 IC[058]:385 IC[059]:385
    voltage in mode2: 10.00 V
    hash rate in mode2: 04575 GH/s

    2020-12-17 20:20:33 driver-btm-soc.c:6494:bitmain_soc_init: fan_eft : 0 fan_pwm : 0
    2020-12-17 20:20:33 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 0
    2020-12-17 20:20:33 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
    2020-12-17 20:21:06 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
    2020-12-17 20:21:08 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 0, find asic num = 60
    2020-12-17 20:21:11 driver-btm-soc.c:4630:set_freq_by_chain: chain[0] set freq:100.00
    2020-12-17 20:21:11 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 20:21:12 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 0
    2020-12-17 20:21:12 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 20:21:12 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 20:21:12 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 20:21:12 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 20:21:12 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 20:21:12 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[0] temp sensor info, correct!
    2020-12-17 20:21:12 temperature.c:748:check_eeprom_calibration_data: chain[0] no need to calibrate !
    2020-12-17 20:21:12 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0
    2020-12-17 20:21:12 temperature.c:763:calibration_sensor_offset: chain[0] temp info,Bad. Reload from eeprom..
    sensor type = 1,sensor num = 2
    sensor pos: 31 40 0 0 0 0
    sensor offset: -5 -4 0 0 0 0
    2020-12-17 20:21:12 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 20:21:12 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 20:21:12 temperature.c:818:calibration_sensor_offset: Chain[0] chip[31] use PIC middle temp offset=-5, typeID=55
    2020-12-17 20:21:13 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[31] local:0 remote:0 offset:-5
    2020-12-17 20:21:13 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[31] get middle temp offset=-5 typeID=55
    2020-12-17 20:21:13 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 20:21:13 temperature.c:818:calibration_sensor_offset: Chain[0] chip[40] use PIC middle temp offset=-4, typeID=55
    2020-12-17 20:21:13 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[40] local:0 remote:0 offset:-4
    2020-12-17 20:21:13 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[40] get middle temp offset=-4 typeID=55
    2020-12-17 20:21:13 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 1
    2020-12-17 20:21:14 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
    2020-12-17 20:21:45 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 20:21:47 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 1, find asic num = 60
    2020-12-17 20:21:50 driver-btm-soc.c:4630:set_freq_by_chain: chain[1] set freq:100.00
    2020-12-17 20:21:50 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 20:21:51 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 1
    2020-12-17 20:21:51 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 20:21:51 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 20:21:51 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 20:21:51 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 20:21:51 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 20:21:51 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[1] temp sensor info, correct!
    2020-12-17 20:21:51 temperature.c:748:check_eeprom_calibration_data: chain[1] no need to calibrate !
    2020-12-17 20:21:51 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0
    2020-12-17 20:21:51 temperature.c:763:calibration_sensor_offset: chain[1] temp info,Bad. Reload from eeprom..
    sensor type = 1,sensor num = 2
    sensor pos: 31 40 0 0 0 0
    sensor offset: -5 -4 0 0 0 0
    2020-12-17 20:21:51 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 20:21:51 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 20:21:51 temperature.c:818:calibration_sensor_offset: Chain[1] chip[31] use PIC middle temp offset=-5, typeID=55
    2020-12-17 20:21:52 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[31] local:0 remote:0 offset:-5
    2020-12-17 20:21:52 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[31] get middle temp offset=-5 typeID=55
    2020-12-17 20:21:52 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 20:21:52 temperature.c:818:calibration_sensor_offset: Chain[1] chip[40] use PIC middle temp offset=-4, typeID=55
    2020-12-17 20:21:52 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[40] local:0 remote:0 offset:-4
    2020-12-17 20:21:52 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-4 typeID=55
    2020-12-17 20:21:52 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 2
    2020-12-17 20:21:53 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 20:22:24 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 20:22:27 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 10
    2020-12-17 20:22:27 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 20:22:28 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 20:22:30 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 10
    2020-12-17 20:22:30 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 20:22:31 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 20:22:32 driver-btm-soc.c:3815:check_asic_num: check asic num with pre_open_core
    2020-12-17 20:22:32 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
    2020-12-17 20:22:32 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 20:22:33 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 20:22:34 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 20:22:34 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 20:22:35 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 20:22:36 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 10
    2020-12-17 20:22:36 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
    2020-12-17 20:22:36 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 20:22:37 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 20:22:38 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 20:22:38 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 20:22:38 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 20:22:40 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 10
    2020-12-17 20:22:41 driver-btm-soc.c:3837:check_asic_num: chian 2 check asic number failed!
    2020-12-17 20:22:41 asic.c:1153:set_baud: set baud=1
    2020-12-17 20:22:41 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 20:22:41 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 20:22:41 asic.c:1164:set_baud: read bc write is 0x81001a
    2020-12-17 20:22:41 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 20:22:41 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 20:22:41 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 20:22:41 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 20:22:41 driver-btm-soc.c:6509:bitmain_soc_init: set TICKET_MASK
    2020-12-17 20:22:41 temperature.c:2081:detect_startup_environment_temperature: Environment temperature: [29]
    2020-12-17 20:22:41 temperature.c:2098:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 1 times ...
    2020-12-17 20:22:52 temperature.c:2081:detect_startup_environment_temperature: Environment temperature: [30]
    2020-12-17 20:22:52 temperature.c:2098:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 2 times ...
    2020-12-17 20:23:03 temperature.c:2081:detect_startup_environment_temperature: Environment temperature: [29]
    2020-12-17 20:23:03 temperature.c:2098:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 3 times ...
    2020-12-17 20:23:13 driver-btm-soc.c:3884:set_clock_delay_control: set mode 0
    2020-12-17 20:23:13 driver-btm-soc.c:3903:set_clock_delay_control: core_data = 0x04
    2020-12-17 20:23:13 driver-btm-soc.c:3974:open_core_bm1393: Start Open Core!!
    2020-12-17 20:23:17 driver-btm-soc.c:4041:open_core_bm1393: End Open Core!!
    2020-12-17 20:23:18 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 125
    2020-12-17 20:23:19 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 150
    2020-12-17 20:23:21 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 175
    2020-12-17 20:23:23 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 200
    2020-12-17 20:23:25 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 225
    2020-12-17 20:23:27 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 250
    2020-12-17 20:23:28 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 275
    2020-12-17 20:23:30 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 300
    2020-12-17 20:23:32 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 325
    2020-12-17 20:23:34 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 350
    2020-12-17 20:23:35 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 375
    2020-12-17 20:23:37 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 20:23:37 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[0] increaseing the diff freq ...
    2020-12-17 20:23:37 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 0 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 20:23:37 driver-btm-soc.c:5255:increase_freq_by_eeprom_slowly: set chain 0 to working voltage
    2020-12-17 20:23:37 power.c:1309:slowly_set_working_power_t11: set chain 0 to working voltage:
    now setting chain[0]-volt[10.20]-data[026]
    now setting chain[0]-volt[10.17]-data[027]
    now setting chain[0]-volt[10.14]-data[028]
    now setting chain[0]-volt[10.11]-data[029]
    now setting chain[0]-volt[10.08]-data[030]
    now setting chain[0]-volt[10.05]-data[031]
    now setting chain[0]-volt[10.02]-data[032]
    2020-12-17 20:24:03 power.c:1331:slowly_set_working_power_t11: done!
    2020-12-17 20:24:03 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 125
    2020-12-17 20:24:05 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 150
    2020-12-17 20:24:06 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 175
    2020-12-17 20:24:08 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 200
    2020-12-17 20:24:10 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 225
    2020-12-17 20:24:12 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 250
    2020-12-17 20:24:14 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 275
    2020-12-17 20:24:15 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 300
    2020-12-17 20:24:17 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 325
    2020-12-17 20:24:19 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 350
    2020-12-17 20:24:21 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 375
    2020-12-17 20:24:22 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 20:24:22 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[1] increaseing the diff freq ...
    2020-12-17 20:24:22 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 1 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 20:24:22 driver-btm-soc.c:5255:increase_freq_by_eeprom_slowly: set chain 1 to working voltage
    2020-12-17 20:24:22 power.c:1309:slowly_set_working_power_t11: set chain 1 to working voltage:
    now setting chain[1]-volt[10.20]-data[026]
    now setting chain[1]-volt[10.17]-data[027]
    now setting chain[1]-volt[10.14]-data[028]
    now setting 2020-12-17 20:24:35 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[1] after 3 times try!
    chain[1]-volt[10.11]-data[029]
    now setting chain[1]-volt[10.08]-data[030]
    now setting chain[1]-volt[10.05]-data[031]
    now setting 2020-12-17 20:24:47 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[1] after 3 times try!
    chain[1]-volt[10.02]-data[032]
    2020-12-17 20:24:48 power.c:1331:slowly_set_working_power_t11: done!
    2020-12-17 20:24:48 driver-btm-soc.c:6545:bitmain_soc_init: set to working voltage...
    2020-12-17 20:24:48 power.c:1258:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage:
    now setting chain[0]-volt[10.02]-data[032] chain[1]-volt[10.02]-data[032]
    2020-12-17 20:24:50 power.c:1278:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage end!
    now setting chain[0]-volt[10.00]-data[032] chain[1]-volt[10.00]-data[032]
    2020-12-17 20:24:50 driver-btm-soc.c:4929:set_timeout: freq 375 final timeout=349
    2020-12-17 20:24:50 driver-btm-soc.c:2925:low_temp_process_parm_init: chip miner_type = [0]
    2020-12-17 20:24:50 driver-btm-soc.c:2925:low_temp_process_parm_init: chip miner_type = [0]
    2020-12-17 20:24:50 driver-btm-soc.c:3539:check_system_work: check system thread start...
    2020-12-17 20:24:50 driver-btm-soc.c:6614:bitmain_soc_init: Init done!
    2020-12-17 20:24:50 driver-btm-soc.c:7257:bitmain_soc_prepare: bitmain soc init success.
    2020-12-17 20:24:50 temperature.c:1542:read_temp_func: bring_up_pcb_temp = 33
    2020-12-17 20:24:51 driver-btm-soc.c:6932:send_job: Version num 1
    2020-12-17 20:25:05 temperature.c:1887:get_target_chip_temp: if startup in low temp environment: NO
    2020-12-17 20:25:05 temperature.c:1733:_get_target_chip_temp_t11: chip miner_type = [0]
    2020-12-17 20:25:05 temperature.c:1733:_get_target_chip_temp_t11: chip miner_type = [0]
    2020-12-17 20:29:49 driver-btm-soc.c:6282:need_mode2_startup: chain 0 rt_hash_rate 4110.81 ideal_hash_rate 4443
    2020-12-17 20:29:49 driver-btm-soc.c:6282:need_mode2_startup: chain 1 rt_hash_rate 4748.32 ideal_hash_rate 4590
    2020-12-17 20:59:49 driver-btm-soc.c:3679:check_system_work: 30 mins avg rate [09150], PCB temp [33 - 62], CHIP temp [57 - 86]
    2020-12-17 21:29:50 driver-btm-soc.c:3679:check_system_work: 30 mins avg rate [09263], PCB temp [34 - 62], CHIP temp [58 - 86]
    2020-12-17 21:35:17 temperature.c:1260:detect_pcb_chip_over_temp: chain[1] start to check asic nums, due to read temp failed
    2020-12-17 21:35:18 driver-btm-soc.c:1854:check_asic_reg_oneChain: crc is 0x12, but it should be 0x1c
    2020-12-17 21:35:18 driver-btm-soc.c:1854:check_asic_reg_oneChain: crc is 0x4, but it should be 0x5
    2020-12-17 21:35:18 driver-btm-soc.c:1854:check_asic_reg_oneChain: crc is 0x15, but it should be 0x11
    2020-12-17 21:35:18 driver-btm-soc.c:1854:check_asic_reg_oneChain: crc is 0xd, but it should be 0x12
    2020-12-17 21:35:18 driver-btm-soc.c:1854:check_asic_reg_oneChain: crc is 0x1c, but it should be 0x6
    2020-12-17 21:35:18 driver-btm-soc.c:1854:check_asic_reg_oneChain: crc is 0xa, but it should be 0x1f
    2020-12-17 21:35:18 driver-btm-soc.c:1854:check_asic_reg_oneChain: crc is 0x1b, but it should be 0xb
    2020-12-17 21:35:18 driver-btm-soc.c:1854:check_asic_reg_oneChain: crc is 0x1f, but it should be 0x19
    2020-12-17 21:35:18 driver-btm-soc.c:1854:check_asic_reg_oneChain: crc is 0xe, but it should be 0xd
    2020-12-17 21:35:19 temperature.c:1264:detect_pcb_chip_over_temp: chain[1] asic[1], need reopen core
    2020-12-17 21:35:19 driver-btm-soc.c:3559:check_system_work: Error: read temp failed, need reopen core!
    2020-12-17 21:35:19 driver-btm-soc.c:6623:reopen_core_for_temp_senor: reopen start to initialize temp sensors!PWM 50
    2020-12-17 21:35:19 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7
    2020-12-17 21:35:19 driver-btm-soc.c:861:check_chain: !! chain[0]is exist
    2020-12-17 21:35:19 driver-btm-soc.c:861:check_chain: !! chain[1]is exist
    2020-12-17 21:35:19 driver-btm-soc.c:861:check_chain: !! chain[2]is exist
    2020-12-17 21:35:21 driver-btm-soc.c:6112:init_miner_version: FPGA Version = 0xB00D
    2020-12-17 21:35:41 power.c:185:power_init: power init ...
    2020-12-17 21:35:41 driver-btm-soc.c:5560:update_highest_voltage: chain 0 hpf working voltage 10.00
    2020-12-17 21:35:41 driver-btm-soc.c:5560:update_highest_voltage: chain 1 hpf working voltage 10.00
    2020-12-17 21:35:41 driver-btm-soc.c:5560:update_highest_voltage: chain 2 hpf working voltage 10.00
    2020-12-17 21:35:41 driver-btm-soc.c:5569:update_highest_voltage: open core at max voltage 10.20
    2020-12-17 21:35:41 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 10.20 ...
    2020-12-17 21:35:42 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 21:35:42 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 10.20 ...
    2020-12-17 21:35:43 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 21:35:43 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.20 ...
    2020-12-17 21:35:44 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 21:35:44 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 0
    2020-12-17 21:35:44 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
    2020-12-17 21:36:18 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 21:36:19 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 0, find asic num = 60
    2020-12-17 21:36:23 driver-btm-soc.c:4630:set_freq_by_chain: chain[0] set freq:100.00
    2020-12-17 21:36:23 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 21:36:23 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 0
    2020-12-17 21:36:23 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 21:36:23 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 21:36:23 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 21:36:23 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 21:36:23 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 21:36:23 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[0] temp sensor info, correct!
    2020-12-17 21:36:23 temperature.c:748:check_eeprom_calibration_data: chain[0] no need to calibrate !
    2020-12-17 21:36:23 temperature.c:768:calibration_sensor_offset: chain[0] temp info,OK
    2020-12-17 21:36:23 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 21:36:23 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 21:36:24 temperature.c:818:calibration_sensor_offset: Chain[0] chip[31] use PIC middle temp offset=-5, typeID=55
    2020-12-17 21:36:24 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[31] local:0 remote:0 offset:-5
    2020-12-17 21:36:24 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[31] get middle temp offset=-5 typeID=55
    2020-12-17 21:36:24 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 21:36:24 temperature.c:818:calibration_sensor_offset: Chain[0] chip[40] use PIC middle temp offset=-4, typeID=55
    2020-12-17 21:36:25 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[40] local:0 remote:0 offset:-4
    2020-12-17 21:36:25 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[40] get middle temp offset=-4 typeID=55
    2020-12-17 21:36:25 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 1
    2020-12-17 21:36:25 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
    2020-12-17 21:36:57 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 21:36:59 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 1, find asic num = 10
    2020-12-17 21:36:59 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
    2020-12-17 21:37:00 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 21:37:02 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 1, find asic num = 60
    2020-12-17 21:37:05 driver-btm-soc.c:4630:set_freq_by_chain: chain[1] set freq:100.00
    2020-12-17 21:37:05 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 21:37:06 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 1
    2020-12-17 21:37:06 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 21:37:06 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 21:37:06 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 21:37:06 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 21:37:06 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 21:37:06 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[1] temp sensor info, correct!
    2020-12-17 21:37:06 temperature.c:748:check_eeprom_calibration_data: chain[1] no need to calibrate !
    2020-12-17 21:37:06 temperature.c:768:calibration_sensor_offset: chain[1] temp info,OK
    2020-12-17 21:37:06 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 21:37:06 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 21:37:07 temperature.c:818:calibration_sensor_offset: Chain[1] chip[31] use PIC middle temp offset=-5, typeID=00
    2020-12-17 21:37:09 temperature.c:860:calibration_sensor_offset: wrong temp chip type!!!
    2020-12-17 21:37:09 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 2
    2020-12-17 21:37:09 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 21:37:41 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 21:37:43 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 10
    2020-12-17 21:37:43 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 21:37:44 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 21:37:47 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 10
    2020-12-17 21:37:47 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 21:37:48 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 21:37:49 driver-btm-soc.c:3815:check_asic_num: check asic num with pre_open_core
    2020-12-17 21:37:49 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
    2020-12-17 21:37:49 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 21:37:50 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 21:37:51 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 21:37:51 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 21:37:51 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 21:37:53 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 10
    2020-12-17 21:37:53 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
    2020-12-17 21:37:53 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 21:37:54 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 21:37:55 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 21:37:55 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 21:37:55 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 21:37:56 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 10
    2020-12-17 21:37:57 driver-btm-soc.c:3837:check_asic_num: chian 2 check asic number failed!
    2020-12-17 21:37:57 asic.c:1153:set_baud: set baud=1
    2020-12-17 21:37:57 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 21:37:57 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 21:37:57 asic.c:1164:set_baud: read bc write is 0x81001a
    2020-12-17 21:37:57 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 21:37:57 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 21:37:57 driver-btm-soc.c:6659:reopen_core_for_temp_senor: set TICKET_MASK
    2020-12-17 21:37:57 driver-btm-soc.c:3884:set_clock_delay_control: set mode 0
    2020-12-17 21:37:57 driver-btm-soc.c:3903:set_clock_delay_control: core_data = 0x04
    2020-12-17 21:37:57 driver-btm-soc.c:3974:open_core_bm1393: Start Open Core!!
    2020-12-17 21:38:01 driver-btm-soc.c:4041:open_core_bm1393: End Open Core!!
    2020-12-17 21:38:01 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 125
    2020-12-17 21:38:03 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 150
    2020-12-17 21:38:04 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 175
    2020-12-17 21:38:05 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 200
    2020-12-17 21:38:07 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 225
    2020-12-17 21:38:08 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 250
    2020-12-17 21:38:10 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 275
    2020-12-17 21:38:11 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 300
    2020-12-17 21:38:12 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 325
    2020-12-17 21:38:14 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 350
    2020-12-17 21:38:15 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 375
    2020-12-17 21:38:17 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 21:38:17 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[0] increaseing the diff freq ...
    2020-12-17 21:38:17 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 0 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 21:38:17 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 125
    2020-12-17 21:38:18 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 150
    2020-12-17 21:38:19 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 175
    2020-12-17 21:38:21 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 200
    2020-12-17 21:38:22 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 225
    2020-12-17 21:38:24 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 250
    2020-12-17 21:38:25 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 275
    2020-12-17 21:38:26 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 300
    2020-12-17 21:38:28 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 325
    2020-12-17 21:38:29 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 350
    2020-12-17 21:38:31 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 375
    2020-12-17 21:38:32 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 21:38:32 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[1] increaseing the diff freq ...
    2020-12-17 21:38:32 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 1 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 21:38:32 driver-btm-soc.c:4929:set_timeout: freq 375 final timeout=349
    2020-12-17 21:38:32 driver-btm-soc.c:6682:reopen_core_for_temp_senor: while re_open, all chain chip temp 59 - 68
    2020-12-17 21:38:32 driver-btm-soc.c:6686:reopen_core_for_temp_senor: set to working voltage...
    2020-12-17 21:38:32 power.c:1258:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage:
    now setting chain[0]-volt[10.17]-data[027] chain[1]-volt[10.17]-data[027]
    now setting chain[0]-volt[10.11]-data[029] chain[1]-volt[10.11]-data[029]
    now setting chain[0]-volt[10.05]-data[031] chain[1]-volt[10.05]-data[031]
    now setting chain[0]-volt[10.00]-data[033] chain[1]-volt[10.00]-data[033]
    now setting chain[0]-volt[09.95]-data[035] chain[1]-volt[09.95]-data[035]
    now setting chain[0]-volt[09.90]-data[037] chain[1]-volt[09.90]-data[037]
    now setting chain[0]-volt[09.85]-data[039] chain[1]-volt[09.85]-data[039]
    now setting chain[0]-volt[09.83]-data[040] chain[1]-volt[09.83]-data[040]
    now setting chain[0]-volt[09.81]-data[041] chain[1]-volt[09.81]-data[041]
    2020-12-17 21:39:01 power.c:1278:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage end!
    now setting chain[0]-volt[09.80]-data[041] chain[1]-volt[09.80]-data[041]
    2020-12-17 21:39:01 driver-btm-soc.c:6697:reopen_core_for_temp_senor: reopen core done
    2020-12-17 21:39:11 hash_rate.c:58:clear_queue: reset calc...
    2020-12-17 21:59:09 temperature.c:1363:process_status_value: Fatal Error: network connection lost!
    2020-12-17 21:59:12 temperature.c:1363:process_status_value: Fatal Error: network connection lost!
    2020-12-17 21:59:14 temperature.c:1363:process_status_value: Fatal Error: network connection lost!
    2020-12-17 22:04:16 driver-btm-soc.c:6282:need_mode2_startup: chain 0 rt_hash_rate 3826.20 ideal_hash_rate 4443
    2020-12-17 22:04:16 driver-btm-soc.c:6282:need_mode2_startup: chain 1 rt_hash_rate 3804.21 ideal_hash_rate 4590
    2020-12-17 22:11:18 temperature.c:1363:process_status_value: Fatal Error: network connection lost!
    2020-12-17 22:11:21 temperature.c:1363:process_status_value: Fatal Error: network connection lost!
    2020-12-17 22:16:23 driver-btm-soc.c:6282:need_mode2_startup: chain 0 rt_hash_rate 3936.14 ideal_hash_rate 4443
    2020-12-17 22:16:23 driver-btm-soc.c:6282:need_mode2_startup: chain 1 rt_hash_rate 4595.83 ideal_hash_rate 4590
    2020-12-17 22:46:23 driver-btm-soc.c:3679:check_system_work: 30 mins avg rate [08417], PCB temp [34 - 65], CHIP temp [56 - 88]
    2020-12-17 22:46:23 driver-btm-soc.c:3686:check_system_work: HW increased -13684 in last 30 minutes
    2020-12-17 23:16:24 driver-btm-soc.c:3679:check_system_work: 30 mins avg rate [08646], PCB temp [35 - 64], CHIP temp [58 - 86]
    2020-12-17 23:16:24 driver-btm-soc.c:3449:hash_rate_guard: hash rate guard triggered! pcb_lowest_temp: 0.0, avg_rate: 8646.4 < 8852.3 in 30min
    2020-12-17 23:16:24 driver-btm-soc.c:3373:volt_increase_for_mode0: chain[0] start reopen core for low temperature voltage increment
    2020-12-17 23:16:24 driver-btm-soc.c:3381:volt_increase_for_mode0: chain[0] voltage: 9.80, now set to: 9.90
    2020-12-17 23:16:24 power.c:232:set_working_voltage_by_chain: chain[0] working_voltage = 9.90
    2020-12-17 23:16:24 driver-btm-soc.c:6704:re_open_core_by_chain:
    re_open_core start!PWM 41
    2020-12-17 23:16:26 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 10.20 ...
    2020-12-17 23:16:27 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 23:16:27 asic.c:1176:set_baud_by_chain: chain 0 set baud=26
    2020-12-17 23:16:27 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x3a01, cmd_buf[2]=0x18000000, misc=0x3a01
    2020-12-17 23:16:27 asic.c:1184:set_baud_by_chain: read bc write is 0x80001a
    2020-12-17 23:16:27 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 0
    2020-12-17 23:16:27 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
    2020-12-17 23:16:28 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:16:29 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 0, find asic num = 60
    2020-12-17 23:16:33 driver-btm-soc.c:4630:set_freq_by_chain: chain[0] set freq:100.00
    2020-12-17 23:16:33 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 23:16:34 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 0
    2020-12-17 23:16:34 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 23:16:34 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 23:16:34 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 23:16:34 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 23:16:34 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 23:16:34 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[0] temp sensor info, correct!
    2020-12-17 23:16:34 temperature.c:748:check_eeprom_calibration_data: chain[0] no need to calibrate !
    2020-12-17 23:16:34 temperature.c:768:calibration_sensor_offset: chain[0] temp info,OK
    2020-12-17 23:16:34 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 23:16:34 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 23:16:34 temperature.c:818:calibration_sensor_offset: Chain[0] chip[31] use PIC middle temp offset=-5, typeID=55
    2020-12-17 23:16:34 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[31] local:0 remote:0 offset:-5
    2020-12-17 23:16:34 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[31] get middle temp offset=-5 typeID=55
    2020-12-17 23:16:34 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 23:16:35 temperature.c:818:calibration_sensor_offset: Chain[0] chip[40] use PIC middle temp offset=-4, typeID=55
    2020-12-17 23:16:35 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[40] local:0 remote:0 offset:-4
    2020-12-17 23:16:35 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[40] get middle temp offset=-4 typeID=55
    2020-12-17 23:16:35 asic.c:1176:set_baud_by_chain: chain 0 set baud=1
    2020-12-17 23:16:35 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 23:16:35 asic.c:1184:set_baud_by_chain: read bc write is 0x80001a
    2020-12-17 23:16:35 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 23:16:35 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 23:16:35 driver-btm-soc.c:6741:re_open_core_by_chain: set TICKET_MASK
    2020-12-17 23:16:35 driver-btm-soc.c:3884:set_clock_delay_control: set mode 0
    2020-12-17 23:16:35 driver-btm-soc.c:3903:set_clock_delay_control: core_data = 0x04
    2020-12-17 23:16:35 driver-btm-soc.c:3917:set_clock_delay_control: single chain mode
    2020-12-17 23:16:35 driver-btm-soc.c:3974:open_core_bm1393: Start Open Core!!
    2020-12-17 23:16:37 driver-btm-soc.c:4041:open_core_bm1393: End Open Core!!
    2020-12-17 23:16:37 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 125
    2020-12-17 23:16:39 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 150
    2020-12-17 23:16:40 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 175
    2020-12-17 23:16:41 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 200
    2020-12-17 23:16:43 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 225
    2020-12-17 23:16:44 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 250
    2020-12-17 23:16:45 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 275
    2020-12-17 23:16:47 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 300
    2020-12-17 23:16:48 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 325
    2020-12-17 23:16:50 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 350
    2020-12-17 23:16:51 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 375
    2020-12-17 23:16:52 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 23:16:52 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[0] increaseing the diff freq ...
    2020-12-17 23:16:52 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 0 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 23:16:52 driver-btm-soc.c:4929:set_timeout: freq 375 final timeout=349
    2020-12-17 23:16:52 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7
    2020-12-17 23:16:52 driver-btm-soc.c:861:check_chain: !! chain[0]is exist
    2020-12-17 23:16:52 driver-btm-soc.c:861:check_chain: !! chain[1]is exist
    2020-12-17 23:16:52 driver-btm-soc.c:861:check_chain: !! chain[2]is exist
    2020-12-17 23:16:53 driver-btm-soc.c:6774:re_open_core_by_chain: reopen chain 0 finished, chain 0 chip temp 59 - 80
    2020-12-17 23:16:53 driver-btm-soc.c:6776:re_open_core_by_chain: all chain chip temp 59 - 80
    2020-12-17 23:16:53 driver-btm-soc.c:6796:re_open_core_by_chain: re_open_core done!
    2020-12-17 23:17:23 hash_rate.c:58:clear_queue: reset calc...
    2020-12-17 23:17:23 power.c:996:slowly_set_iic_power_to_working_voltage_by_chain: chain[0] slowly setting to voltage: 09.90 ...
    2020-12-17 23:17:24 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.20
    2020-12-17 23:17:27 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.20
    2020-12-17 23:17:32 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.17
    2020-12-17 23:17:32 dspic33ep16gs202.c:213:dsPIC33EP16GS202_pic_heart_beat: ERROR! failed on Chain[0] after 3 times try!
    2020-12-17 23:17:36 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.14
    2020-12-17 23:17:39 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.11
    2020-12-17 23:17:42 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.08
    2020-12-17 23:17:46 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.02
    2020-12-17 23:17:47 dspic33ep16gs202.c:213:dsPIC33EP16GS202_pic_heart_beat: ERROR! failed on Chain[0] after 3 times try!
    2020-12-17 23:17:51 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.97
    2020-12-17 23:17:54 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.95
    2020-12-17 23:17:55 driver-btm-soc.c:3373:volt_increase_for_mode0: chain[1] start reopen core for low temperature voltage increment
    2020-12-17 23:17:55 driver-btm-soc.c:3381:volt_increase_for_mode0: chain[1] voltage: 9.80, now set to: 9.90
    2020-12-17 23:17:55 power.c:232:set_working_voltage_by_chain: chain[1] working_voltage = 9.90
    2020-12-17 23:17:55 driver-btm-soc.c:6704:re_open_core_by_chain:
    re_open_core start!PWM 53
    2020-12-17 23:17:57 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 10.20 ...
    2020-12-17 23:17:58 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 23:17:58 asic.c:1176:set_baud_by_chain: chain 1 set baud=26
    2020-12-17 23:17:58 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x3a01, cmd_buf[2]=0x18000000, misc=0x3a01
    2020-12-17 23:17:58 asic.c:1184:set_baud_by_chain: read bc write is 0x81001a
    2020-12-17 23:17:58 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 1
    2020-12-17 23:17:58 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
    2020-12-17 23:17:59 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:18:00 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 1, find asic num = 60
    2020-12-17 23:18:04 driver-btm-soc.c:4630:set_freq_by_chain: chain[1] set freq:100.00
    2020-12-17 23:18:04 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 23:18:05 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 1
    2020-12-17 23:18:05 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 23:18:05 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 23:18:05 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 23:18:05 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 23:18:05 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 23:18:05 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[1] temp sensor info, correct!
    2020-12-17 23:18:05 temperature.c:748:check_eeprom_calibration_data: chain[1] no need to calibrate !
    2020-12-17 23:18:05 temperature.c:768:calibration_sensor_offset: chain[1] temp info,OK
    2020-12-17 23:18:05 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 23:18:05 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 23:18:05 temperature.c:818:calibration_sensor_offset: Chain[1] chip[31] use PIC middle temp offset=-5, typeID=55
    2020-12-17 23:18:05 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[31] local:0 remote:0 offset:-5
    2020-12-17 23:18:05 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[31] get middle temp offset=-5 typeID=55
    2020-12-17 23:18:05 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 23:18:06 temperature.c:818:calibration_sensor_offset: Chain[1] chip[40] use PIC middle temp offset=-4, typeID=55
    2020-12-17 23:18:06 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[40] local:0 remote:0 offset:-4
    2020-12-17 23:18:06 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-4 typeID=55
    2020-12-17 23:18:06 asic.c:1176:set_baud_by_chain: chain 1 set baud=1
    2020-12-17 23:18:06 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 23:18:06 asic.c:1184:set_baud_by_chain: read bc write is 0x81001a
    2020-12-17 23:18:06 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 23:18:06 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 23:18:06 driver-btm-soc.c:6741:re_open_core_by_chain: set TICKET_MASK
    2020-12-17 23:18:06 driver-btm-soc.c:3884:set_clock_delay_control: set mode 0
    2020-12-17 23:18:06 driver-btm-soc.c:3903:set_clock_delay_control: core_data = 0x04
    2020-12-17 23:18:06 driver-btm-soc.c:3917:set_clock_delay_control: single chain mode
    2020-12-17 23:18:06 driver-btm-soc.c:3974:open_core_bm1393: Start Open Core!!
    2020-12-17 23:18:08 driver-btm-soc.c:4041:open_core_bm1393: End Open Core!!
    2020-12-17 23:18:08 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 125
    2020-12-17 23:18:10 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 150
    2020-12-17 23:18:11 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 175
    2020-12-17 23:18:12 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 200
    2020-12-17 23:18:14 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 225
    2020-12-17 23:18:15 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 250
    2020-12-17 23:18:17 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 275
    2020-12-17 23:18:18 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 300
    2020-12-17 23:18:19 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 325
    2020-12-17 23:18:21 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 350
    2020-12-17 23:18:22 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 375
    2020-12-17 23:18:23 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 23:18:23 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[1] increaseing the diff freq ...
    2020-12-17 23:18:23 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 1 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 23:18:23 driver-btm-soc.c:4929:set_timeout: freq 375 final timeout=349
    2020-12-17 23:18:23 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7
    2020-12-17 23:18:23 driver-btm-soc.c:861:check_chain: !! chain[0]is exist
    2020-12-17 23:18:23 driver-btm-soc.c:861:check_chain: !! chain[1]is exist
    2020-12-17 23:18:23 driver-btm-soc.c:861:check_chain: !! chain[2]is exist
    2020-12-17 23:18:24 driver-btm-soc.c:6774:re_open_core_by_chain: reopen chain 1 finished, chain 1 chip temp 63 - 78
    2020-12-17 23:18:24 driver-btm-soc.c:6776:re_open_core_by_chain: all chain chip temp 59 - 84
    2020-12-17 23:18:25 driver-btm-soc.c:6796:re_open_core_by_chain: re_open_core done!
    2020-12-17 23:18:55 hash_rate.c:58:clear_queue: reset calc...
    2020-12-17 23:18:55 power.c:996:slowly_set_iic_power_to_working_voltage_by_chain: chain[1] slowly setting to voltage: 09.90 ...
    2020-12-17 23:18:55 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.20
    2020-12-17 23:19:01 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.20
    2020-12-17 23:19:04 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.17
    2020-12-17 23:19:07 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.14
    2020-12-17 23:19:13 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.11
    2020-12-17 23:19:16 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.08
    2020-12-17 23:19:19 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.02
    2020-12-17 23:19:25 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.97
    2020-12-17 23:19:28 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.95
    2020-12-17 23:19:29 driver-btm-soc.c:3373:volt_increase_for_mode0: chain[2] start reopen core for low temperature voltage increment
    2020-12-17 23:19:29 driver-btm-soc.c:3376:volt_increase_for_mode0: chain[2] voltage: 10.20, now set to: 10.30
    2020-12-17 23:19:29 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 10.30
    2020-12-17 23:19:29 driver-btm-soc.c:6704:re_open_core_by_chain:
    re_open_core start!PWM 45
    2020-12-17 23:19:32 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.20 ...
    2020-12-17 23:19:32 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 23:19:33 asic.c:1176:set_baud_by_chain: chain 2 set baud=26
    2020-12-17 23:19:33 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x3a01, cmd_buf[2]=0x18000000, misc=0x3a01
    2020-12-17 23:19:33 asic.c:1184:set_baud_by_chain: read bc write is 0x82001a
    2020-12-17 23:19:33 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 2
    2020-12-17 23:19:33 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:19:34 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:19:36 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 0
    2020-12-17 23:19:36 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:19:37 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:19:39 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 0
    2020-12-17 23:19:39 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:19:40 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:19:41 driver-btm-soc.c:3815:check_asic_num: check asic num with pre_open_core
    2020-12-17 23:19:41 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
    2020-12-17 23:19:41 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:19:42 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:19:43 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 23:19:43 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 23:19:43 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 23:19:44 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 0
    2020-12-17 23:19:44 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
    2020-12-17 23:19:44 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:19:45 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:19:46 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 23:19:46 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 23:19:47 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 23:19:48 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 0
    2020-12-17 23:19:48 driver-btm-soc.c:3837:check_asic_num: chian 2 check asic number failed!
    2020-12-17 23:20:18 hash_rate.c:58:clear_queue: reset calc...
    2020-12-17 23:20:18 power.c:988:slowly_set_iic_power_to_working_voltage_by_chain: error! chain[2] does not exist!
    2020-12-17 23:50:18 driver-btm-soc.c:3679:check_system_work: 30 mins avg rate [00000], PCB temp [34 - 64], CHIP temp [59 - 88]
    2020-12-17 23:50:18 driver-btm-soc.c:3449:hash_rate_guard: hash rate guard triggered! pcb_lowest_temp: 0.0, avg_rate: 0.0 < 8852.3 in 30min
    2020-12-17 23:50:18 driver-btm-soc.c:3373:volt_increase_for_mode0: chain[0] start reopen core for low temperature voltage increment
    2020-12-17 23:50:18 driver-btm-soc.c:3381:volt_increase_for_mode0: chain[0] voltage: 9.90, now set to: 10.00
    2020-12-17 23:50:18 power.c:232:set_working_voltage_by_chain: chain[0] working_voltage = 10.00
    2020-12-17 23:50:18 driver-btm-soc.c:6704:re_open_core_by_chain:
    re_open_core start!PWM 45

    0
    评论操作 固定链接
  • Eleazar Villanueva

    this is other 

     

     

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203784K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25592K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12552K (ccebe000 - cdb00000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAGAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2203570081
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID F459BAFD-54C0-4468-8801-F447616A7A1E, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 438/109, WL threshold: 4096, image sequence number: 914180297
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID BCBDE5E0-4C0B-4978-9734-FC58D9F68227, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xab00d
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    [2020-12-17 22:07:21.625] httpListenThread start ret=0
    [2020-12-17 22:07:51.630] start listen on 6060 ...
    [2020-12-17 22:12:34.218] setStartTimePoint total_tv_start_sys=351 total_tv_end_sys=352

    2020-12-17 22:07:21 cgminer.c:11470:cnt_of_proc: pidof cgminer command result is:1206

    2020-12-17 22:07:21 cgminer.c:11471:cnt_of_proc: strlen is: 5
    2020-12-17 22:07:21 cgminer.c:11492:cnt_of_proc: Parsed proc id is: 1206
    2020-12-17 22:07:21 cgminer.c:11504:cnt_of_proc: 1 instance of cgminer is already Running on this machine
    2020-12-17 22:07:21 driver-btm-soc.c:6311:bitmain_soc_init: This is Antminer S9k scan user version
    2020-12-17 22:07:21 driver-btm-soc.c:6317:bitmain_soc_init: special mode: disabled
    2020-12-17 22:07:21 driver-btm-soc.c:6324:bitmain_soc_init: This is high performance mode
    2020-12-17 22:07:21 driver-btm-soc.c:6329:bitmain_soc_init: last commit version: 94e8f08 commit time: 2019-10-31 10:33:22 build: 2019-12-13 10:14:11
    2020-12-17 22:07:21 driver-btm-soc.c:6350:bitmain_soc_init: Detect 256MB control board of XILINX
    2020-12-17 22:07:21 driver-btm-soc.c:6353:bitmain_soc_init: Miner compile time: Fri Dec 13 10:01:09 CST 2019 type: Antminer S9k
    2020-12-17 22:07:21 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7
    2020-12-17 22:07:21 driver-btm-soc.c:861:check_chain: !! chain[0]is exist
    2020-12-17 22:07:21 driver-btm-soc.c:861:check_chain: !! chain[1]is exist
    2020-12-17 22:07:21 driver-btm-soc.c:861:check_chain: !! chain[2]is exist
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fd ff
    00000080 ff ff ff ff ff ff ff c3 4b 4b 4b 4b 4b 4b 4b 4b
    00000090 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000a0 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000b0 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000c0 4b 4b 4b 4b 00 ff ff ff ff ff ff ff ff ff ff ff
    000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000f0 ff ff ff ff 09 12 00 00 80 ff ff ff 39 10 fc 27
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fb 28 fc ff
    00000080 ff ff ff ff ff ff ff c3 4b 4b 4b 4b 4b 4b 4b 4b
    00000090 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000a0 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000b0 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000c0 4b 4b 4b 4b 02 ff ff ff ff ff ff ff ff ff ff ff
    000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000f0 ff ff ff ff 77 11 00 00 80 ff ff ff 39 10 8d da
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fd ff
    00000080 ff ff ff ff ff ff ff c3 4b 4b 4b 4b 4b 4b 4b 4b
    00000090 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000a0 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000b0 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000c0 4b 4b 4b 4b 00 ff ff ff ff ff ff ff ff ff ff ff
    000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000f0 ff ff ff ff a9 11 00 00 80 ff ff ff 39 10 ee 55

    read chain[0] hardware info:
    major type: 0
    minor type: 0
    chip level: 2
    bom version: 0x10
    pcb version: 0x39
    fixture 8pattern result: L0

    read chain[1] hardware info:
    major type: 0
    minor type: 0
    chip level: 2
    bom version: 0x10
    pcb version: 0x39
    fixture 8pattern result: L2

    read chain[2] hardware info:
    major type: 0
    minor type: 0
    chip level: 2
    bom version: 0x10
    pcb version: 0x39
    fixture 8pattern result: L0

    sweep config for eco mode:
    sweep_start_voltage: 9.44
    max_aging_voltage: 9.84
    sweep_min_freq: 270M
    sweep_max_freq: 310M

    sweep config for hpf mode:
    sweep_start_voltage: 9.90
    max_aging_voltage: 10.30
    sweep_min_freq: 355M
    sweep_max_freq: 385M
    2020-12-17 22:07:34 driver-btm-soc.c:5770:get_freq_result_from_eeprom: orginal chip freq:
    chain 0 freq:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375

    chain 1 freq:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375

    chain 2 freq:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375

    2020-12-17 22:07:34 driver-btm-soc.c:6443:bitmain_soc_init: reset all...
    2020-12-17 22:07:36 driver-btm-soc.c:6451:bitmain_soc_init: miner ID : 80626cc42b10481c
    2020-12-17 22:07:36 driver-btm-soc.c:6112:init_miner_version: FPGA Version = 0xB00D
    2020-12-17 22:07:55 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[0] PIC software version: 177
    2020-12-17 22:07:56 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[1] PIC software version: 177
    2020-12-17 22:07:57 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177
    2020-12-17 22:07:57 power.c:185:power_init: power init ...
    2020-12-17 22:07:57 driver-btm-soc.c:4877:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[0] eeprom
    2020-12-17 22:07:57 power.c:232:set_working_voltage_by_chain: chain[0] working_voltage = 9.90
    2020-12-17 22:07:57 driver-btm-soc.c:4877:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[1] eeprom
    2020-12-17 22:07:57 power.c:232:set_working_voltage_by_chain: chain[1] working_voltage = 9.90
    2020-12-17 22:07:57 driver-btm-soc.c:4877:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[2] eeprom
    2020-12-17 22:07:57 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 9.90
    2020-12-17 22:07:57 driver-btm-soc.c:5560:update_highest_voltage: chain 0 hpf working voltage 9.90
    2020-12-17 22:07:57 driver-btm-soc.c:5560:update_highest_voltage: chain 1 hpf working voltage 9.90
    2020-12-17 22:07:57 driver-btm-soc.c:5560:update_highest_voltage: chain 2 hpf working voltage 9.90
    2020-12-17 22:07:57 driver-btm-soc.c:5569:update_highest_voltage: open core at max voltage 10.20
    2020-12-17 22:07:57 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 10.20 ...
    2020-12-17 22:07:59 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 22:07:59 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 10.20 ...
    2020-12-17 22:08:00 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 22:08:00 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.20 ...
    2020-12-17 22:08:01 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 22:08:01 driver-btm-soc.c:1259:get_ideal_hash_rate: get ideal hash rate 13500
    2020-12-17 22:08:01 eeprom.c:675:travel_eeprom_store: chain[0] data in eeprom is:
    magic number: 0x7e
    freq data per ASIC:
    IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275
    IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275
    IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275
    IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275
    IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275
    IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275
    voltage: 11.10 V
    hash rate: -0001 GH/s

    freq data per ASIC in mode2:
    IC[000]:375 IC[001]:375 IC[002]:375 IC[003]:375 IC[004]:375 IC[005]:375 IC[006]:375 IC[007]:375 IC[008]:375 IC[009]:375
    IC[010]:375 IC[011]:375 IC[012]:375 IC[013]:375 IC[014]:375 IC[015]:375 IC[016]:375 IC[017]:375 IC[018]:375 IC[019]:375
    IC[020]:375 IC[021]:375 IC[022]:375 IC[023]:375 IC[024]:375 IC[025]:375 IC[026]:375 IC[027]:375 IC[028]:375 IC[029]:375
    IC[030]:375 IC[031]:375 IC[032]:375 IC[033]:375 IC[034]:375 IC[035]:375 IC[036]:375 IC[037]:375 IC[038]:375 IC[039]:375
    IC[040]:375 IC[041]:375 IC[042]:375 IC[043]:375 IC[044]:375 IC[045]:375 IC[046]:375 IC[047]:375 IC[048]:375 IC[049]:375
    IC[050]:375 IC[051]:375 IC[052]:375 IC[053]:375 IC[054]:375 IC[055]:375 IC[056]:375 IC[057]:375 IC[058]:375 IC[059]:375
    voltage in mode2: 9.90 V
    hash rate in mode2: 04617 GH/s

    2020-12-17 22:08:02 eeprom.c:675:travel_eeprom_store: chain[1] data in eeprom is:
    magic number: 0x7e
    freq data per ASIC:
    IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275
    IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275
    IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275
    IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275
    IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275
    IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275
    voltage: 11.10 V
    hash rate: -0001 GH/s

    freq data per ASIC in mode2:
    IC[000]:375 IC[001]:375 IC[002]:375 IC[003]:375 IC[004]:375 IC[005]:375 IC[006]:375 IC[007]:375 IC[008]:375 IC[009]:375
    IC[010]:375 IC[011]:375 IC[012]:375 IC[013]:375 IC[014]:375 IC[015]:375 IC[016]:375 IC[017]:375 IC[018]:375 IC[019]:375
    IC[020]:375 IC[021]:375 IC[022]:375 IC[023]:375 IC[024]:375 IC[025]:375 IC[026]:375 IC[027]:375 IC[028]:375 IC[029]:375
    IC[030]:375 IC[031]:375 IC[032]:375 IC[033]:375 IC[034]:375 IC[035]:375 IC[036]:375 IC[037]:375 IC[038]:375 IC[039]:375
    IC[040]:375 IC[041]:375 IC[042]:375 IC[043]:375 IC[044]:375 IC[045]:375 IC[046]:375 IC[047]:375 IC[048]:375 IC[049]:375
    IC[050]:375 IC[051]:375 IC[052]:375 IC[053]:375 IC[054]:375 IC[055]:375 IC[056]:375 IC[057]:375 IC[058]:375 IC[059]:375
    voltage in mode2: 9.90 V
    hash rate in mode2: 04471 GH/s

    2020-12-17 22:08:02 eeprom.c:675:travel_eeprom_store: chain[2] data in eeprom is:
    magic number: 0x7e
    freq data per ASIC:
    IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275
    IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275
    IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275
    IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275
    IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275
    IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275
    voltage: 11.10 V
    hash rate: -0001 GH/s

    freq data per ASIC in mode2:
    IC[000]:375 IC[001]:375 IC[002]:375 IC[003]:375 IC[004]:375 IC[005]:375 IC[006]:375 IC[007]:375 IC[008]:375 IC[009]:375
    IC[010]:375 IC[011]:375 IC[012]:375 IC[013]:375 IC[014]:375 IC[015]:375 IC[016]:375 IC[017]:375 IC[018]:375 IC[019]:375
    IC[020]:375 IC[021]:375 IC[022]:375 IC[023]:375 IC[024]:375 IC[025]:375 IC[026]:375 IC[027]:375 IC[028]:375 IC[029]:375
    IC[030]:375 IC[031]:375 IC[032]:375 IC[033]:375 IC[034]:375 IC[035]:375 IC[036]:375 IC[037]:375 IC[038]:375 IC[039]:375
    IC[040]:375 IC[041]:375 IC[042]:375 IC[043]:375 IC[044]:375 IC[045]:375 IC[046]:375 IC[047]:375 IC[048]:375 IC[049]:375
    IC[050]:375 IC[051]:375 IC[052]:375 IC[053]:375 IC[054]:375 IC[055]:375 IC[056]:375 IC[057]:375 IC[058]:375 IC[059]:375
    voltage in mode2: 9.90 V
    hash rate in mode2: 04521 GH/s

    2020-12-17 22:08:02 driver-btm-soc.c:6494:bitmain_soc_init: fan_eft : 0 fan_pwm : 0
    2020-12-17 22:08:02 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 0
    2020-12-17 22:08:02 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
    2020-12-17 22:08:35 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
    2020-12-17 22:08:37 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 0, find asic num = 60
    2020-12-17 22:08:40 driver-btm-soc.c:4630:set_freq_by_chain: chain[0] set freq:100.00
    2020-12-17 22:08:40 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 22:08:41 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 0
    2020-12-17 22:08:41 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 22:08:41 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 22:08:41 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 22:08:41 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 22:08:41 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 22:08:41 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[0] temp sensor info, correct!
    2020-12-17 22:08:41 temperature.c:748:check_eeprom_calibration_data: chain[0] no need to calibrate !
    2020-12-17 22:08:41 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0
    2020-12-17 22:08:41 temperature.c:763:calibration_sensor_offset: chain[0] temp info,Bad. Reload from eeprom..
    sensor type = 1,sensor num = 2
    sensor pos: 31 40 0 0 0 0
    sensor offset: -4 -3 0 0 0 0
    2020-12-17 22:08:41 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 22:08:41 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 22:08:41 temperature.c:818:calibration_sensor_offset: Chain[0] chip[31] use PIC middle temp offset=-4, typeID=55
    2020-12-17 22:08:42 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[31] local:0 remote:0 offset:-4
    2020-12-17 22:08:42 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[31] get middle temp offset=-4 typeID=55
    2020-12-17 22:08:42 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 22:08:42 temperature.c:818:calibration_sensor_offset: Chain[0] chip[40] use PIC middle temp offset=-3, typeID=55
    2020-12-17 22:08:42 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[40] local:0 remote:0 offset:-3
    2020-12-17 22:08:42 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[40] get middle temp offset=-3 typeID=55
    2020-12-17 22:08:42 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 1
    2020-12-17 22:08:43 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
    2020-12-17 22:09:15 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:09:16 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 1, find asic num = 60
    2020-12-17 22:09:19 driver-btm-soc.c:4630:set_freq_by_chain: chain[1] set freq:100.00
    2020-12-17 22:09:20 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 22:09:20 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 1
    2020-12-17 22:09:20 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 22:09:20 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 22:09:20 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 22:09:20 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 22:09:20 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 22:09:20 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[1] temp sensor info, correct!
    2020-12-17 22:09:20 temperature.c:748:check_eeprom_calibration_data: chain[1] no need to calibrate !
    2020-12-17 22:09:20 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0
    2020-12-17 22:09:20 temperature.c:763:calibration_sensor_offset: chain[1] temp info,Bad. Reload from eeprom..
    sensor type = 1,sensor num = 2
    sensor pos: 31 40 0 0 0 0
    sensor offset: -5 -4 0 0 0 0
    2020-12-17 22:09:20 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 22:09:20 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 22:09:21 temperature.c:818:calibration_sensor_offset: Chain[1] chip[31] use PIC middle temp offset=-5, typeID=55
    2020-12-17 22:09:21 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[31] local:0 remote:0 offset:-5
    2020-12-17 22:09:21 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[31] get middle temp offset=-5 typeID=55
    2020-12-17 22:09:21 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 22:09:21 temperature.c:818:calibration_sensor_offset: Chain[1] chip[40] use PIC middle temp offset=-4, typeID=55
    2020-12-17 22:09:21 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[40] local:0 remote:0 offset:-4
    2020-12-17 22:09:21 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-4 typeID=55
    2020-12-17 22:09:21 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 2
    2020-12-17 22:09:22 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:09:54 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:09:56 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 10
    2020-12-17 22:09:56 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:09:57 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:10:00 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 10
    2020-12-17 22:10:00 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:10:01 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:10:02 driver-btm-soc.c:3815:check_asic_num: check asic num with pre_open_core
    2020-12-17 22:10:02 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
    2020-12-17 22:10:02 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:10:03 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:10:04 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 22:10:04 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 22:10:04 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 22:10:05 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 10
    2020-12-17 22:10:05 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
    2020-12-17 22:10:05 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:10:06 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:10:07 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 22:10:07 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 22:10:08 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 22:10:09 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 10
    2020-12-17 22:10:10 driver-btm-soc.c:3837:check_asic_num: chian 2 check asic number failed!
    2020-12-17 22:10:10 asic.c:1153:set_baud: set baud=1
    2020-12-17 22:10:10 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 22:10:10 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 22:10:10 asic.c:1164:set_baud: read bc write is 0x81001a
    2020-12-17 22:10:10 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 22:10:10 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 22:10:10 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 22:10:10 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 22:10:10 driver-btm-soc.c:6509:bitmain_soc_init: set TICKET_MASK
    2020-12-17 22:10:11 temperature.c:2081:detect_startup_environment_temperature: Environment temperature: [29]
    2020-12-17 22:10:11 temperature.c:2098:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 1 times ...
    2020-12-17 22:10:21 temperature.c:2081:detect_startup_environment_temperature: Environment temperature: [30]
    2020-12-17 22:10:21 temperature.c:2098:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 2 times ...
    2020-12-17 22:10:32 temperature.c:2081:detect_startup_environment_temperature: Environment temperature: [29]
    2020-12-17 22:10:32 temperature.c:2098:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 3 times ...
    2020-12-17 22:10:42 driver-btm-soc.c:3884:set_clock_delay_control: set mode 0
    2020-12-17 22:10:42 driver-btm-soc.c:3903:set_clock_delay_control: core_data = 0x04
    2020-12-17 22:10:42 driver-btm-soc.c:3974:open_core_bm1393: Start Open Core!!
    2020-12-17 22:10:46 driver-btm-soc.c:4041:open_core_bm1393: End Open Core!!
    2020-12-17 22:10:47 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 125
    2020-12-17 22:10:49 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 150
    2020-12-17 22:10:50 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 175
    2020-12-17 22:10:52 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 200
    2020-12-17 22:10:54 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 225
    2020-12-17 22:10:56 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 250
    2020-12-17 22:10:58 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 275
    2020-12-17 22:10:59 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 300
    2020-12-17 22:11:01 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 325
    2020-12-17 22:11:03 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 350
    2020-12-17 22:11:05 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 375
    2020-12-17 22:11:06 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 22:11:06 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[0] increaseing the diff freq ...
    2020-12-17 22:11:06 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 0 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 22:11:06 driver-btm-soc.c:5255:increase_freq_by_eeprom_slowly: set chain 0 to working voltage
    2020-12-17 22:11:06 power.c:1309:slowly_set_working_power_t11: set chain 0 to working voltage:
    now setting chain[0]-volt[10.20]-data[026]
    now setting chain[0]-volt[10.17]-data[027]
    now setting chain[0]-volt[10.14]-data[028]
    now setting chain[0]-volt[10.11]-data[029]
    now setting chain[0]-volt[10.08]-data[030]
    now setting chain[0]-volt[10.02]-data[032]
    now setting chain[0]-volt[09.97]-data[034]
    now setting chain[0]-volt[09.95]-data[035]
    now setting chain[0]-volt[09.92]-data[036]
    2020-12-17 22:11:39 power.c:1331:slowly_set_working_power_t11: done!
    2020-12-17 22:11:39 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 125
    2020-12-17 22:11:41 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 150
    2020-12-17 22:11:43 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 175
    2020-12-17 22:11:44 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 200
    2020-12-17 22:11:46 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 225
    2020-12-17 22:11:48 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 250
    2020-12-17 22:11:50 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 275
    2020-12-17 22:11:51 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 300
    2020-12-17 22:11:53 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 325
    2020-12-17 22:11:55 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 350
    2020-12-17 22:11:57 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 375
    2020-12-17 22:11:58 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 22:11:58 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[1] increaseing the diff freq ...
    2020-12-17 22:11:58 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 1 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 22:11:59 driver-btm-soc.c:5255:increase_freq_by_eeprom_slowly: set chain 1 to working voltage
    2020-12-17 22:11:59 power.c:1309:slowly_set_working_power_t11: set chain 1 to working voltage:
    now setting chain[1]-volt[10.20]-data[026]
    now setting chain[1]-volt[10.17]-data[027]
    now setting chain[1]-volt[10.14]-data[028]
    now setting chain[1]-volt[10.11]-data[029]
    now setting chain[1]-volt[10.08]-data[030]
    now setting 2020-12-17 22:12:19 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[1] after 3 times try!
    chain[1]-volt[10.02]-data[032]
    now setting chain[1]-volt[09.97]-data[034]
    now setting chain[1]-volt[09.95]-data[035]
    now setting 2020-12-17 22:12:30 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[1] after 3 times try!
    chain[1]-volt[09.92]-data[036]
    2020-12-17 22:12:31 power.c:1331:slowly_set_working_power_t11: done!
    2020-12-17 22:12:31 driver-btm-soc.c:6545:bitmain_soc_init: set to working voltage...
    2020-12-17 22:12:31 power.c:1258:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage:
    now setting chain[0]-volt[09.92]-data[036] chain[1]-volt[09.92]-data[036]
    2020-12-17 22:12:33 power.c:1278:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage end!
    now setting chain[0]-volt[09.90]-data[036] chain[1]-volt[09.90]-data[036]
    2020-12-17 22:12:33 driver-btm-soc.c:4929:set_timeout: freq 375 final timeout=349
    2020-12-17 22:12:33 driver-btm-soc.c:2925:low_temp_process_parm_init: chip miner_type = [0]
    2020-12-17 22:12:33 driver-btm-soc.c:2925:low_temp_process_parm_init: chip miner_type = [0]
    2020-12-17 22:12:33 driver-btm-soc.c:3539:check_system_work: check system thread start...
    2020-12-17 22:12:34 driver-btm-soc.c:6614:bitmain_soc_init: Init done!
    2020-12-17 22:12:34 driver-btm-soc.c:7257:bitmain_soc_prepare: bitmain soc init success.
    2020-12-17 22:12:34 temperature.c:1542:read_temp_func: bring_up_pcb_temp = 34
    2020-12-17 22:12:35 driver-btm-soc.c:6932:send_job: Version num 1
    2020-12-17 22:12:49 temperature.c:1887:get_target_chip_temp: if startup in low temp environment: NO
    2020-12-17 22:12:49 temperature.c:1733:_get_target_chip_temp_t11: chip miner_type = [0]
    2020-12-17 22:12:49 temperature.c:1733:_get_target_chip_temp_t11: chip miner_type = [0]
    2020-12-17 22:17:32 driver-btm-soc.c:6282:need_mode2_startup: chain 0 rt_hash_rate 4639.80 ideal_hash_rate 4617
    2020-12-17 22:17:32 driver-btm-soc.c:6282:need_mode2_startup: chain 1 rt_hash_rate 4639.80 ideal_hash_rate 4471
    2020-12-17 22:47:33 driver-btm-soc.c:3679:check_system_work: 30 mins avg rate [08979], PCB temp [34 - 62], CHIP temp [59 - 86]
    2020-12-17 23:17:33 driver-btm-soc.c:3679:check_system_work: 30 mins avg rate [08930], PCB temp [35 - 62], CHIP temp [60 - 86]
    2020-12-17 23:22:32 temperature.c:1260:detect_pcb_chip_over_temp: chain[1] start to check asic nums, due to read temp failed
    2020-12-17 23:22:33 temperature.c:1264:detect_pcb_chip_over_temp: chain[1] asic[0], need reopen core
    2020-12-17 23:22:33 driver-btm-soc.c:3559:check_system_work: Error: read temp failed, need reopen core!
    2020-12-17 23:22:33 driver-btm-soc.c:6623:reopen_core_for_temp_senor: reopen start to initialize temp sensors!PWM 64
    2020-12-17 23:22:33 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7
    2020-12-17 23:22:33 driver-btm-soc.c:861:check_chain: !! chain[0]is exist
    2020-12-17 23:22:33 driver-btm-soc.c:861:check_chain: !! chain[1]is exist
    2020-12-17 23:22:33 driver-btm-soc.c:861:check_chain: !! chain[2]is exist
    2020-12-17 23:22:35 driver-btm-soc.c:6112:init_miner_version: FPGA Version = 0xB00D
    2020-12-17 23:22:56 power.c:185:power_init: power init ...
    2020-12-17 23:22:56 driver-btm-soc.c:5560:update_highest_voltage: chain 0 hpf working voltage 9.90
    2020-12-17 23:22:56 driver-btm-soc.c:5560:update_highest_voltage: chain 1 hpf working voltage 9.90
    2020-12-17 23:22:56 driver-btm-soc.c:5560:update_highest_voltage: chain 2 hpf working voltage 9.90
    2020-12-17 23:22:56 driver-btm-soc.c:5569:update_highest_voltage: open core at max voltage 10.20
    2020-12-17 23:22:56 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 10.20 ...
    2020-12-17 23:22:57 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 23:22:57 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 10.20 ...
    2020-12-17 23:22:57 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 23:22:58 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.20 ...
    2020-12-17 23:22:58 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 23:22:59 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 0
    2020-12-17 23:22:59 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
    2020-12-17 23:23:32 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:23:34 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 0, find asic num = 60
    2020-12-17 23:23:37 driver-btm-soc.c:4630:set_freq_by_chain: chain[0] set freq:100.00
    2020-12-17 23:23:37 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 23:23:38 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 0
    2020-12-17 23:23:38 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 23:23:38 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 23:23:38 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 23:23:38 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 23:23:38 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 23:23:38 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[0] temp sensor info, correct!
    2020-12-17 23:23:38 temperature.c:748:check_eeprom_calibration_data: chain[0] no need to calibrate !
    2020-12-17 23:23:38 temperature.c:768:calibration_sensor_offset: chain[0] temp info,OK
    2020-12-17 23:23:38 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 23:23:38 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 23:23:38 temperature.c:818:calibration_sensor_offset: Chain[0] chip[31] use PIC middle temp offset=-4, typeID=55
    2020-12-17 23:23:39 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[31] local:0 remote:0 offset:-4
    2020-12-17 23:23:39 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[31] get middle temp offset=-4 typeID=55
    2020-12-17 23:23:39 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 23:23:39 temperature.c:818:calibration_sensor_offset: Chain[0] chip[40] use PIC middle temp offset=-3, typeID=55
    2020-12-17 23:23:39 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[40] local:0 remote:0 offset:-3
    2020-12-17 23:23:39 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[40] get middle temp offset=-3 typeID=55
    2020-12-17 23:23:39 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 1
    2020-12-17 23:23:40 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
    2020-12-17 23:24:11 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:24:13 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 1, find asic num = 60
    2020-12-17 23:24:16 driver-btm-soc.c:4630:set_freq_by_chain: chain[1] set freq:100.00
    2020-12-17 23:24:16 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 23:24:17 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 1
    2020-12-17 23:24:17 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 23:24:17 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 23:24:17 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 23:24:17 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 23:24:17 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 23:24:17 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[1] temp sensor info, correct!
    2020-12-17 23:24:17 temperature.c:748:check_eeprom_calibration_data: chain[1] no need to calibrate !
    2020-12-17 23:24:17 temperature.c:768:calibration_sensor_offset: chain[1] temp info,OK
    2020-12-17 23:24:17 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 23:24:17 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 23:24:17 temperature.c:818:calibration_sensor_offset: Chain[1] chip[31] use PIC middle temp offset=-5, typeID=55
    2020-12-17 23:24:18 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[31] local:0 remote:0 offset:-5
    2020-12-17 23:24:18 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[31] get middle temp offset=-5 typeID=55
    2020-12-17 23:24:18 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 23:24:18 temperature.c:818:calibration_sensor_offset: Chain[1] chip[40] use PIC middle temp offset=-4, typeID=55
    2020-12-17 23:24:18 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[40] local:0 remote:0 offset:-4
    2020-12-17 23:24:18 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-4 typeID=55
    2020-12-17 23:24:18 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 2
    2020-12-17 23:24:19 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:24:51 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:24:53 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 40
    2020-12-17 23:24:53 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:24:54 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:24:57 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 10
    2020-12-17 23:24:57 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:24:58 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:24:59 driver-btm-soc.c:3815:check_asic_num: check asic num with pre_open_core
    2020-12-17 23:24:59 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
    2020-12-17 23:24:59 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:25:00 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:25:01 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 23:25:01 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 23:25:01 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 23:25:02 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 10
    2020-12-17 23:25:02 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
    2020-12-17 23:25:02 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:25:03 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:25:04 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 23:25:04 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 23:25:05 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 23:25:05 driver-btm-soc.c:1854:check_asic_reg_oneChain: crc is 0x1a, but it should be 0x0
    2020-12-17 23:25:06 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 9
    2020-12-17 23:25:07 driver-btm-soc.c:3837:check_asic_num: chian 2 check asic number failed!
    2020-12-17 23:25:07 asic.c:1153:set_baud: set baud=1
    2020-12-17 23:25:07 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 23:25:07 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 23:25:07 asic.c:1164:set_baud: read bc write is 0x81001a
    2020-12-17 23:25:07 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 23:25:07 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 23:25:07 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 23:25:07 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 23:25:07 driver-btm-soc.c:6659:reopen_core_for_temp_senor: set TICKET_MASK
    2020-12-17 23:25:07 driver-btm-soc.c:3884:set_clock_delay_control: set mode 0
    2020-12-17 23:25:07 driver-btm-soc.c:3903:set_clock_delay_control: core_data = 0x04
    2020-12-17 23:25:07 driver-btm-soc.c:3974:open_core_bm1393: Start Open Core!!
    2020-12-17 23:25:11 driver-btm-soc.c:4041:open_core_bm1393: End Open Core!!
    2020-12-17 23:25:11 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 125
    2020-12-17 23:25:13 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 150
    2020-12-17 23:25:14 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 175
    2020-12-17 23:25:16 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 200
    2020-12-17 23:25:18 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 225
    2020-12-17 23:25:20 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 250
    2020-12-17 23:25:21 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 275
    2020-12-17 23:25:23 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 300
    2020-12-17 23:25:25 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 325
    2020-12-17 23:25:27 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 350
    2020-12-17 23:25:29 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 375
    2020-12-17 23:25:30 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 23:25:30 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[0] increaseing the diff freq ...
    2020-12-17 23:25:30 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 0 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 23:25:30 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 125
    2020-12-17 23:25:32 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 150
    2020-12-17 23:25:34 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 175
    2020-12-17 23:25:36 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 200
    2020-12-17 23:25:37 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 225
    2020-12-17 23:25:39 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 250
    2020-12-17 23:25:41 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 275
    2020-12-17 23:25:43 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 300
    2020-12-17 23:25:45 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 325
    2020-12-17 23:25:46 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 350
    2020-12-17 23:25:48 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 375
    2020-12-17 23:25:50 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 23:25:50 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[1] increaseing the diff freq ...
    2020-12-17 23:25:50 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 1 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 23:25:50 driver-btm-soc.c:4929:set_timeout: freq 375 final timeout=349
    2020-12-17 23:25:51 driver-btm-soc.c:6682:reopen_core_for_temp_senor: while re_open, all chain chip temp 59 - 75
    2020-12-17 23:25:51 driver-btm-soc.c:6686:reopen_core_for_temp_senor: set to working voltage...
    2020-12-17 23:25:51 power.c:1258:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage:
    now setting chain[0]-volt[10.17]-data[027] chain[1]-volt[10.17]-data[027]
    now setting chain[0]-volt[10.11]-data[029] chain[1]-volt[10.11]-data[029]
    now setting chain[0]-volt[10.05]-data[031] chain[1]-volt[10.05]-data[031]
    now setting chain[0]-volt[10.00]-data[033] chain[1]-volt[10.00]-data[033]
    now setting chain[0]-volt[09.95]-data[035] chain[1]-volt[09.95]-data[035]
    now setting chain[0]-volt[09.90]-data[037] chain[1]-volt[09.90]-data[037]
    now setting chain[0]-volt[09.85]-data[039] chain[1]-volt[09.85]-data[039]
    now setting chain[0]-volt[09.83]-data[040] chain[1]-volt[09.83]-data[040]
    now setting chain[0]-volt[09.81]-data[041] chain[1]-volt[09.81]-data[041]
    2020-12-17 23:26:19 power.c:1278:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage end!
    now setting chain[0]-volt[09.80]-data[041] chain[1]-volt[09.80]-data[041]
    2020-12-17 23:26:19 driver-btm-soc.c:6697:reopen_core_for_temp_senor: reopen core done
    2020-12-17 23:26:29 hash_rate.c:58:clear_queue: reset calc...
    2020-12-17 23:51:29 driver-btm-soc.c:3679:check_system_work: 30 mins avg rate [08653], PCB temp [34 - 64], CHIP temp [59 - 88]
    2020-12-17 23:51:29 driver-btm-soc.c:3449:hash_rate_guard: hash rate guard triggered! pcb_lowest_temp: 0.0, avg_rate: 8653.3 < 8906.2 in 30min
    2020-12-17 23:51:29 driver-btm-soc.c:3373:volt_increase_for_mode0: chain[0] start reopen core for low temperature voltage increment
    2020-12-17 23:51:29 driver-btm-soc.c:3381:volt_increase_for_mode0: chain[0] voltage: 9.80, now set to: 9.90
    2020-12-17 23:51:29 power.c:232:set_working_voltage_by_chain: chain[0] working_voltage = 9.90
    2020-12-17 23:51:29 driver-btm-soc.c:6704:re_open_core_by_chain:
    re_open_core start!PWM 56
    2020-12-17 23:51:31 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 10.20 ...
    2020-12-17 23:51:32 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 23:51:32 asic.c:1176:set_baud_by_chain: chain 0 set baud=26
    2020-12-17 23:51:32 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x3a01, cmd_buf[2]=0x18000000, misc=0x3a01
    2020-12-17 23:51:32 asic.c:1184:set_baud_by_chain: read bc write is 0x80001a
    2020-12-17 23:51:32 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 0
    2020-12-17 23:51:32 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
    2020-12-17 23:51:33 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:51:35 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 0, find asic num = 60
    2020-12-17 23:51:38 driver-btm-soc.c:4630:set_freq_by_chain: chain[0] set freq:100.00
    2020-12-17 23:51:38 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 23:51:39 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 0
    2020-12-17 23:51:39 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 23:51:39 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 23:51:39 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 23:51:39 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 23:51:39 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 23:51:39 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[0] temp sensor info, correct!
    2020-12-17 23:51:39 temperature.c:748:check_eeprom_calibration_data: chain[0] no need to calibrate !
    2020-12-17 23:51:39 temperature.c:768:calibration_sensor_offset: chain[0] temp info,OK
    2020-12-17 23:51:39 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 23:51:39 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 23:51:39 temperature.c:818:calibration_sensor_offset: Chain[0] chip[31] use PIC middle temp offset=-4, typeID=55
    2020-12-17 23:51:40 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[31] local:0 remote:0 offset:-4
    2020-12-17 23:51:40 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[31] get middle temp offset=-4 typeID=55
    2020-12-17 23:51:40 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 23:51:40 temperature.c:818:calibration_sensor_offset: Chain[0] chip[40] use PIC middle temp offset=-3, typeID=55
    2020-12-17 23:51:40 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[40] local:0 remote:0 offset:-3
    2020-12-17 23:51:40 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[40] get middle temp offset=-3 typeID=55
    2020-12-17 23:51:40 asic.c:1176:set_baud_by_chain: chain 0 set baud=1
    2020-12-17 23:51:40 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 23:51:40 asic.c:1184:set_baud_by_chain: read bc write is 0x80001a
    2020-12-17 23:51:40 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 23:51:40 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 23:51:40 driver-btm-soc.c:6741:re_open_core_by_chain: set TICKET_MASK
    2020-12-17 23:51:40 driver-btm-soc.c:3884:set_clock_delay_control: set mode 0
    2020-12-17 23:51:40 driver-btm-soc.c:3903:set_clock_delay_control: core_data = 0x04
    2020-12-17 23:51:40 driver-btm-soc.c:3917:set_clock_delay_control: single chain mode
    2020-12-17 23:51:40 driver-btm-soc.c:3974:open_core_bm1393: Start Open Core!!
    2020-12-17 23:51:42 driver-btm-soc.c:4041:open_core_bm1393: End Open Core!!
    2020-12-17 23:51:42 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 125
    2020-12-17 23:51:44 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 150
    2020-12-17 23:51:45 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 175
    2020-12-17 23:51:46 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 200
    2020-12-17 23:51:48 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 225
    2020-12-17 23:51:49 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 250
    2020-12-17 23:51:51 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 275
    2020-12-17 23:51:52 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 300
    2020-12-17 23:51:53 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 325
    2020-12-17 23:51:55 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 350
    2020-12-17 23:51:56 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[0] increase to 375
    2020-12-17 23:51:58 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 23:51:58 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[0] increaseing the diff freq ...
    2020-12-17 23:51:58 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 0 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 23:51:58 driver-btm-soc.c:4929:set_timeout: freq 375 final timeout=349
    2020-12-17 23:51:58 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7
    2020-12-17 23:51:58 driver-btm-soc.c:861:check_chain: !! chain[0]is exist
    2020-12-17 23:51:58 driver-btm-soc.c:861:check_chain: !! chain[1]is exist
    2020-12-17 23:51:58 driver-btm-soc.c:861:check_chain: !! chain[2]is exist
    2020-12-17 23:51:58 driver-btm-soc.c:6774:re_open_core_by_chain: reopen chain 0 finished, chain 0 chip temp 60 - 79
    2020-12-17 23:51:58 driver-btm-soc.c:6776:re_open_core_by_chain: all chain chip temp 60 - 82
    2020-12-17 23:51:59 driver-btm-soc.c:6796:re_open_core_by_chain: re_open_core done!
    2020-12-17 23:52:29 hash_rate.c:58:clear_queue: reset calc...
    2020-12-17 23:52:29 power.c:996:slowly_set_iic_power_to_working_voltage_by_chain: chain[0] slowly setting to voltage: 09.90 ...
    2020-12-17 23:52:29 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.20
    2020-12-17 23:52:32 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.20
    2020-12-17 23:52:37 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.17
    2020-12-17 23:52:40 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.14
    2020-12-17 23:52:43 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.11
    2020-12-17 23:52:46 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.08
    2020-12-17 23:52:50 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.02
    2020-12-17 23:52:53 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.97
    2020-12-17 23:52:56 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.95
    2020-12-17 23:52:57 driver-btm-soc.c:3373:volt_increase_for_mode0: chain[1] start reopen core for low temperature voltage increment
    2020-12-17 23:52:57 driver-btm-soc.c:3381:volt_increase_for_mode0: chain[1] voltage: 9.80, now set to: 9.90
    2020-12-17 23:52:57 power.c:232:set_working_voltage_by_chain: chain[1] working_voltage = 9.90
    2020-12-17 23:52:57 driver-btm-soc.c:6704:re_open_core_by_chain:
    re_open_core start!PWM 62
    2020-12-17 23:52:59 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 10.20 ...
    2020-12-17 23:53:00 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 23:53:00 asic.c:1176:set_baud_by_chain: chain 1 set baud=26
    2020-12-17 23:53:00 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x3a01, cmd_buf[2]=0x18000000, misc=0x3a01
    2020-12-17 23:53:00 asic.c:1184:set_baud_by_chain: read bc write is 0x81001a
    2020-12-17 23:53:00 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 1
    2020-12-17 23:53:00 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
    2020-12-17 23:53:01 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:53:02 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 1, find asic num = 60
    2020-12-17 23:53:06 driver-btm-soc.c:4630:set_freq_by_chain: chain[1] set freq:100.00
    2020-12-17 23:53:06 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 23:53:07 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 1
    2020-12-17 23:53:07 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 23:53:07 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 23:53:07 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 23:53:07 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 23:53:07 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 23:53:07 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[1] temp sensor info, correct!
    2020-12-17 23:53:07 temperature.c:748:check_eeprom_calibration_data: chain[1] no need to calibrate !
    2020-12-17 23:53:07 temperature.c:768:calibration_sensor_offset: chain[1] temp info,OK
    2020-12-17 23:53:07 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 23:53:07 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 23:53:07 temperature.c:818:calibration_sensor_offset: Chain[1] chip[31] use PIC middle temp offset=-5, typeID=55
    2020-12-17 23:53:07 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[31] local:0 remote:0 offset:-5
    2020-12-17 23:53:07 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[31] get middle temp offset=-5 typeID=55
    2020-12-17 23:53:07 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 23:53:08 temperature.c:818:calibration_sensor_offset: Chain[1] chip[40] use PIC middle temp offset=-4, typeID=55
    2020-12-17 23:53:08 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[40] local:0 remote:0 offset:-4
    2020-12-17 23:53:08 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-4 typeID=55
    2020-12-17 23:53:08 asic.c:1176:set_baud_by_chain: chain 1 set baud=1
    2020-12-17 23:53:08 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 23:53:08 asic.c:1184:set_baud_by_chain: read bc write is 0x81001a
    2020-12-17 23:53:08 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 23:53:08 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 23:53:08 driver-btm-soc.c:6741:re_open_core_by_chain: set TICKET_MASK
    2020-12-17 23:53:08 driver-btm-soc.c:3884:set_clock_delay_control: set mode 0
    2020-12-17 23:53:08 driver-btm-soc.c:3903:set_clock_delay_control: core_data = 0x04
    2020-12-17 23:53:08 driver-btm-soc.c:3917:set_clock_delay_control: single chain mode
    2020-12-17 23:53:08 driver-btm-soc.c:3974:open_core_bm1393: Start Open Core!!
    2020-12-17 23:53:10 driver-btm-soc.c:4041:open_core_bm1393: End Open Core!!
    2020-12-17 23:53:10 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 125
    2020-12-17 23:53:11 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 150
    2020-12-17 23:53:13 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 175
    2020-12-17 23:53:14 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 200
    2020-12-17 23:53:16 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 225
    2020-12-17 23:53:17 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 250
    2020-12-17 23:53:18 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 275
    2020-12-17 23:53:20 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 300
    2020-12-17 23:53:21 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 325
    2020-12-17 23:53:23 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 350
    2020-12-17 23:53:24 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 375
    2020-12-17 23:53:25 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 23:53:25 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[1] increaseing the diff freq ...
    2020-12-17 23:53:25 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 1 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 23:53:25 driver-btm-soc.c:4929:set_timeout: freq 375 final timeout=349
    2020-12-17 23:53:25 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7
    2020-12-17 23:53:25 driver-btm-soc.c:861:check_chain: !! chain[0]is exist
    2020-12-17 23:53:25 driver-btm-soc.c:861:check_chain: !! chain[1]is exist
    2020-12-17 23:53:25 driver-btm-soc.c:861:check_chain: !! chain[2]is exist
    2020-12-17 23:53:26 driver-btm-soc.c:6774:re_open_core_by_chain: reopen chain 1 finished, chain 1 chip temp 61 - 77
    2020-12-17 23:53:26 driver-btm-soc.c:6776:re_open_core_by_chain: all chain chip temp 60 - 86
    2020-12-17 23:53:27 driver-btm-soc.c:6796:re_open_core_by_chain: re_open_core done!
    2020-12-17 23:53:57 hash_rate.c:58:clear_queue: reset calc...
    2020-12-17 23:53:57 power.c:996:slowly_set_iic_power_to_working_voltage_by_chain: chain[1] slowly setting to voltage: 09.90 ...
    2020-12-17 23:53:57 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.20
    2020-12-17 23:54:02 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.20
    2020-12-17 23:54:05 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.17
    2020-12-17 23:54:08 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.14
    2020-12-17 23:54:11 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.11
    2020-12-17 23:54:15 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.08
    2020-12-17 23:54:18 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.02
    2020-12-17 23:54:21 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.97
    2020-12-17 23:54:24 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.95
    2020-12-17 23:54:25 driver-btm-soc.c:3373:volt_increase_for_mode0: chain[2] start reopen core for low temperature voltage increment
    2020-12-17 23:54:25 driver-btm-soc.c:3376:volt_increase_for_mode0: chain[2] voltage: 10.20, now set to: 10.30
    2020-12-17 23:54:25 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 10.30
    2020-12-17 23:54:25 driver-btm-soc.c:6704:re_open_core_by_chain:
    re_open_core start!PWM 60
    2020-12-17 23:54:27 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.20 ...
    2020-12-17 23:54:29 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 23:54:29 asic.c:1176:set_baud_by_chain: chain 2 set baud=26
    2020-12-17 23:54:29 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x3a01, cmd_buf[2]=0x18000000, misc=0x3a01
    2020-12-17 23:54:29 asic.c:1184:set_baud_by_chain: read bc write is 0x82001a
    2020-12-17 23:54:29 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 2
    2020-12-17 23:54:29 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:54:30 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:54:32 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 0
    2020-12-17 23:54:32 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:54:33 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:54:36 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 0
    2020-12-17 23:54:36 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:54:37 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:54:38 driver-btm-soc.c:3815:check_asic_num: check asic num with pre_open_core
    2020-12-17 23:54:38 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
    2020-12-17 23:54:38 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:54:39 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:54:40 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 23:54:40 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 23:54:40 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 23:54:41 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 0
    2020-12-17 23:54:41 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
    2020-12-17 23:54:41 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 23:54:42 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 23:54:43 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 23:54:43 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 23:54:43 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 23:54:45 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 0
    2020-12-17 23:54:45 driver-btm-soc.c:3837:check_asic_num: chian 2 check asic number failed!
    2020-12-17 23:55:15 hash_rate.c:58:clear_queue: reset calc...
    2020-12-17 23:55:15 power.c:988:slowly_set_iic_power_to_working_voltage_by_chain: error! chain[2] does not exist!
    2020-12-18 00:25:15 driver-btm-soc.c:3679:check_system_work: 30 mins avg rate [00000], PCB temp [34 - 63], CHIP temp [60 - 88]
    2020-12-18 00:25:15 driver-btm-soc.c:3449:hash_rate_guard: hash rate guard triggered! pcb_lowest_temp: 0.0, avg_rate: 0.0 < 8906.2 in 30min
    2020-12-18 00:25:15 driver-btm-soc.c:3373:volt_increase_for_mode0: chain[0] start reopen core for low temperature voltage increment
    2020-12-18 00:25:15 driver-btm-soc.c:3381:volt_increase_for_mode0: chain[0] voltage: 9.90, now set to: 10.00
    2020-12-18 00:25:15 power.c:232:set_working_voltage_by_chain: chain[0] working_voltage = 10.00
    2020-12-18 00:25:15 driver-btm-soc.c:6704:re_open_core_by_chain:
    re_open_core start!PWM 60

    0
    评论操作 固定链接
  • Eleazar Villanueva

    This is other, work good a few hours but fail after four five hours

     

     

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203784K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25592K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12552K (ccebe000 - cdb00000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAGAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1930547024
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID B26FD440-BB31-41ED-ADD8-3E681464A979, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 551/116, WL threshold: 4096, image sequence number: 914180297
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID BCBDE5E0-4C0B-4978-9734-FC58D9F68227, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xab00d
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    [2020-12-17 20:20:44.517] httpListenThread start ret=0
    [2020-12-17 20:21:14.522] start listen on 6060 ...
    [2020-12-17 20:26:56.879] setStartTimePoint total_tv_start_sys=410 total_tv_end_sys=411

    2020-12-17 20:20:44 cgminer.c:11470:cnt_of_proc: pidof cgminer command result is:1201

    2020-12-17 20:20:44 cgminer.c:11471:cnt_of_proc: strlen is: 5
    2020-12-17 20:20:44 cgminer.c:11492:cnt_of_proc: Parsed proc id is: 1201
    2020-12-17 20:20:44 cgminer.c:11504:cnt_of_proc: 1 instance of cgminer is already Running on this machine
    2020-12-17 20:20:44 driver-btm-soc.c:6311:bitmain_soc_init: This is Antminer S9k scan user version
    2020-12-17 20:20:44 driver-btm-soc.c:6317:bitmain_soc_init: special mode: disabled
    2020-12-17 20:20:44 driver-btm-soc.c:6324:bitmain_soc_init: This is high performance mode
    2020-12-17 20:20:44 driver-btm-soc.c:6329:bitmain_soc_init: last commit version: 94e8f08 commit time: 2019-10-31 10:33:22 build: 2019-12-13 10:14:11
    2020-12-17 20:20:44 driver-btm-soc.c:6350:bitmain_soc_init: Detect 256MB control board of XILINX
    2020-12-17 20:20:44 driver-btm-soc.c:6353:bitmain_soc_init: Miner compile time: Fri Dec 13 10:01:09 CST 2019 type: Antminer S9k
    2020-12-17 20:20:44 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7
    2020-12-17 20:20:44 driver-btm-soc.c:861:check_chain: !! chain[0]is exist
    2020-12-17 20:20:44 driver-btm-soc.c:861:check_chain: !! chain[1]is exist
    2020-12-17 20:20:44 driver-btm-soc.c:861:check_chain: !! chain[2]is exist
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fb 28 fc ff
    00000080 ff ff ff ff ff ff ff c3 49 49 49 49 49 49 49 49
    00000090 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49
    000000a0 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49
    000000b0 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49
    000000c0 49 49 49 49 00 ff ff ff ff ff ff ff ff ff ff ff
    000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000f0 ff ff ff ff 82 11 00 00 40 ff ff ff 39 10 57 73
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fd ff
    00000080 ff ff ff ff ff ff ff c3 4b 4b 4b 4b 4b 4b 4b 4b
    00000090 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000a0 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000b0 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000c0 4b 4b 4b 4b 00 ff ff ff ff ff ff ff ff ff ff ff
    000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000f0 ff ff ff ff 0c 12 00 00 40 ff ff ff 39 10 fd 37
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fd ff
    00000080 ff ff ff ff ff ff ff c3 4b 4b 4b 4b 4b 4b 4b 4b
    00000090 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000a0 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000b0 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b 4b
    000000c0 4b 4b 4b 4b 00 ff ff ff ff ff ff ff ff ff ff ff
    000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    000000f0 ff ff ff ff 9b 11 00 00 40 ff ff ff 39 10 5e 60

    read chain[0] hardware info:
    major type: 0
    minor type: 0
    chip level: 1
    bom version: 0x10
    pcb version: 0x39
    fixture 8pattern result: L0

    read chain[1] hardware info:
    major type: 0
    minor type: 0
    chip level: 1
    bom version: 0x10
    pcb version: 0x39
    fixture 8pattern result: L0

    read chain[2] hardware info:
    major type: 0
    minor type: 0
    chip level: 1
    bom version: 0x10
    pcb version: 0x39
    fixture 8pattern result: L0

    sweep config for eco mode:
    sweep_start_voltage: 9.25
    max_aging_voltage: 9.65
    sweep_min_freq: 300M
    sweep_max_freq: 350M

    sweep config for hpf mode:
    sweep_start_voltage: 9.90
    max_aging_voltage: 10.30
    sweep_min_freq: 355M
    sweep_max_freq: 385M
    2020-12-17 20:20:57 driver-btm-soc.c:5770:get_freq_result_from_eeprom: orginal chip freq:
    chain 0 freq:
    365 365 365 365 365 365 365 365 365 365
    365 365 365 365 365 365 365 365 365 365
    365 365 365 365 365 365 365 365 365 365
    365 365 365 365 365 365 365 365 365 365
    365 365 365 365 365 365 365 365 365 365
    365 365 365 365 365 365 365 365 365 365

    chain 1 freq:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375

    chain 2 freq:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375

    2020-12-17 20:20:57 driver-btm-soc.c:6443:bitmain_soc_init: reset all...
    2020-12-17 20:20:59 driver-btm-soc.c:6451:bitmain_soc_init: miner ID : 8068c5242b104814
    2020-12-17 20:20:59 driver-btm-soc.c:6112:init_miner_version: FPGA Version = 0xB00D
    2020-12-17 20:21:18 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[0] PIC software version: 177
    2020-12-17 20:21:19 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[1] PIC software version: 177
    2020-12-17 20:21:19 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177
    2020-12-17 20:21:19 power.c:185:power_init: power init ...
    2020-12-17 20:21:19 driver-btm-soc.c:4877:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[0] eeprom
    2020-12-17 20:21:19 power.c:232:set_working_voltage_by_chain: chain[0] working_voltage = 9.90
    2020-12-17 20:21:19 driver-btm-soc.c:4877:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[1] eeprom
    2020-12-17 20:21:19 power.c:232:set_working_voltage_by_chain: chain[1] working_voltage = 9.90
    2020-12-17 20:21:19 driver-btm-soc.c:4877:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[2] eeprom
    2020-12-17 20:21:19 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 9.90
    2020-12-17 20:21:19 driver-btm-soc.c:5560:update_highest_voltage: chain 0 hpf working voltage 9.90
    2020-12-17 20:21:19 driver-btm-soc.c:5560:update_highest_voltage: chain 1 hpf working voltage 9.90
    2020-12-17 20:21:19 driver-btm-soc.c:5560:update_highest_voltage: chain 2 hpf working voltage 9.90
    2020-12-17 20:21:19 driver-btm-soc.c:5569:update_highest_voltage: open core at max voltage 10.20
    2020-12-17 20:21:19 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 10.20 ...
    2020-12-17 20:21:22 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 20:21:22 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 10.20 ...
    2020-12-17 20:21:23 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 20:21:23 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.20 ...
    2020-12-17 20:21:24 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 20:21:24 driver-btm-soc.c:1259:get_ideal_hash_rate: get ideal hash rate 13500
    2020-12-17 20:21:24 eeprom.c:675:travel_eeprom_store: chain[0] data in eeprom is:
    magic number: 0x7e
    freq data per ASIC:
    IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275
    IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275
    IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275
    IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275
    IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275
    IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275
    voltage: 11.10 V
    hash rate: -0001 GH/s

    freq data per ASIC in mode2:
    IC[000]:365 IC[001]:365 IC[002]:365 IC[003]:365 IC[004]:365 IC[005]:365 IC[006]:365 IC[007]:365 IC[008]:365 IC[009]:365
    IC[010]:365 IC[011]:365 IC[012]:365 IC[013]:365 IC[014]:365 IC[015]:365 IC[016]:365 IC[017]:365 IC[018]:365 IC[019]:365
    IC[020]:365 IC[021]:365 IC[022]:365 IC[023]:365 IC[024]:365 IC[025]:365 IC[026]:365 IC[027]:365 IC[028]:365 IC[029]:365
    IC[030]:365 IC[031]:365 IC[032]:365 IC[033]:365 IC[034]:365 IC[035]:365 IC[036]:365 IC[037]:365 IC[038]:365 IC[039]:365
    IC[040]:365 IC[041]:365 IC[042]:365 IC[043]:365 IC[044]:365 IC[045]:365 IC[046]:365 IC[047]:365 IC[048]:365 IC[049]:365
    IC[050]:365 IC[051]:365 IC[052]:365 IC[053]:365 IC[054]:365 IC[055]:365 IC[056]:365 IC[057]:365 IC[058]:365 IC[059]:365
    voltage in mode2: 9.90 V
    hash rate in mode2: 04482 GH/s

    2020-12-17 20:21:24 eeprom.c:675:travel_eeprom_store: chain[1] data in eeprom is:
    magic number: 0x7e
    freq data per ASIC:
    IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275
    IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275
    IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275
    IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275
    IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275
    IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275
    voltage: 11.10 V
    hash rate: -0001 GH/s

    freq data per ASIC in mode2:
    IC[000]:375 IC[001]:375 IC[002]:375 IC[003]:375 IC[004]:375 IC[005]:375 IC[006]:375 IC[007]:375 IC[008]:375 IC[009]:375
    IC[010]:375 IC[011]:375 IC[012]:375 IC[013]:375 IC[014]:375 IC[015]:375 IC[016]:375 IC[017]:375 IC[018]:375 IC[019]:375
    IC[020]:375 IC[021]:375 IC[022]:375 IC[023]:375 IC[024]:375 IC[025]:375 IC[026]:375 IC[027]:375 IC[028]:375 IC[029]:375
    IC[030]:375 IC[031]:375 IC[032]:375 IC[033]:375 IC[034]:375 IC[035]:375 IC[036]:375 IC[037]:375 IC[038]:375 IC[039]:375
    IC[040]:375 IC[041]:375 IC[042]:375 IC[043]:375 IC[044]:375 IC[045]:375 IC[046]:375 IC[047]:375 IC[048]:375 IC[049]:375
    IC[050]:375 IC[051]:375 IC[052]:375 IC[053]:375 IC[054]:375 IC[055]:375 IC[056]:375 IC[057]:375 IC[058]:375 IC[059]:375
    voltage in mode2: 9.90 V
    hash rate in mode2: 04620 GH/s

    2020-12-17 20:21:25 eeprom.c:675:travel_eeprom_store: chain[2] data in eeprom is:
    magic number: 0x7e
    freq data per ASIC:
    IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275
    IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275
    IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275
    IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275
    IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275
    IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275
    voltage: 11.10 V
    hash rate: -0001 GH/s

    freq data per ASIC in mode2:
    IC[000]:375 IC[001]:375 IC[002]:375 IC[003]:375 IC[004]:375 IC[005]:375 IC[006]:375 IC[007]:375 IC[008]:375 IC[009]:375
    IC[010]:375 IC[011]:375 IC[012]:375 IC[013]:375 IC[014]:375 IC[015]:375 IC[016]:375 IC[017]:375 IC[018]:375 IC[019]:375
    IC[020]:375 IC[021]:375 IC[022]:375 IC[023]:375 IC[024]:375 IC[025]:375 IC[026]:375 IC[027]:375 IC[028]:375 IC[029]:375
    IC[030]:375 IC[031]:375 IC[032]:375 IC[033]:375 IC[034]:375 IC[035]:375 IC[036]:375 IC[037]:375 IC[038]:375 IC[039]:375
    IC[040]:375 IC[041]:375 IC[042]:375 IC[043]:375 IC[044]:375 IC[045]:375 IC[046]:375 IC[047]:375 IC[048]:375 IC[049]:375
    IC[050]:375 IC[051]:375 IC[052]:375 IC[053]:375 IC[054]:375 IC[055]:375 IC[056]:375 IC[057]:375 IC[058]:375 IC[059]:375
    voltage in mode2: 9.90 V
    hash rate in mode2: 04507 GH/s

    2020-12-17 20:21:25 driver-btm-soc.c:6494:bitmain_soc_init: fan_eft : 0 fan_pwm : 0
    2020-12-17 20:21:25 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 0
    2020-12-17 20:21:25 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
    2020-12-17 20:21:58 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
    2020-12-17 20:22:01 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 0, find asic num = 44
    2020-12-17 20:22:01 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
    2020-12-17 20:22:02 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
    2020-12-17 20:22:04 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 0, find asic num = 44
    2020-12-17 20:22:04 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
    2020-12-17 20:22:05 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
    2020-12-17 20:22:06 driver-btm-soc.c:3815:check_asic_num: check asic num with pre_open_core
    2020-12-17 20:22:06 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
    2020-12-17 20:22:06 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
    2020-12-17 20:22:07 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
    2020-12-17 20:22:08 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 0
    2020-12-17 20:22:08 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 20:22:09 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 0
    2020-12-17 20:22:10 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 0, find asic num = 44
    2020-12-17 20:22:10 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
    2020-12-17 20:22:10 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
    2020-12-17 20:22:11 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
    2020-12-17 20:22:12 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 0
    2020-12-17 20:22:12 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 20:22:12 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 0
    2020-12-17 20:22:14 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 0, find asic num = 44
    2020-12-17 20:22:14 driver-btm-soc.c:3837:check_asic_num: chian 0 check asic number failed!
    2020-12-17 20:22:14 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 1
    2020-12-17 20:22:15 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
    2020-12-17 20:22:47 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 20:22:48 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 1, find asic num = 60
    2020-12-17 20:22:52 driver-btm-soc.c:4630:set_freq_by_chain: chain[1] set freq:100.00
    2020-12-17 20:22:52 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 20:22:52 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 1
    2020-12-17 20:22:52 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 20:22:52 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 20:22:52 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 20:22:52 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 20:22:52 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 20:22:52 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[1] temp sensor info, correct!
    2020-12-17 20:22:52 temperature.c:748:check_eeprom_calibration_data: chain[1] no need to calibrate !
    2020-12-17 20:22:52 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0
    2020-12-17 20:22:52 temperature.c:763:calibration_sensor_offset: chain[1] temp info,Bad. Reload from eeprom..
    sensor type = 1,sensor num = 2
    sensor pos: 31 40 0 0 0 0
    sensor offset: -4 -3 0 0 0 0
    2020-12-17 20:22:52 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 20:22:52 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 20:22:53 temperature.c:818:calibration_sensor_offset: Chain[1] chip[31] use PIC middle temp offset=-4, typeID=55
    2020-12-17 20:22:53 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[31] local:0 remote:0 offset:-4
    2020-12-17 20:22:53 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[31] get middle temp offset=-4 typeID=55
    2020-12-17 20:22:53 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 20:22:53 temperature.c:818:calibration_sensor_offset: Chain[1] chip[40] use PIC middle temp offset=-3, typeID=55
    2020-12-17 20:22:54 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[40] local:0 remote:0 offset:-3
    2020-12-17 20:22:54 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-3 typeID=55
    2020-12-17 20:22:54 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 2
    2020-12-17 20:22:54 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 20:23:26 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 20:23:27 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 60
    2020-12-17 20:23:31 driver-btm-soc.c:4630:set_freq_by_chain: chain[2] set freq:100.00
    2020-12-17 20:23:31 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 20:23:31 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 20:23:31 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 20:23:31 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 20:23:31 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 20:23:31 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 20:23:31 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 20:23:31 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[2] temp sensor info, correct!
    2020-12-17 20:23:31 temperature.c:748:check_eeprom_calibration_data: chain[2] no need to calibrate !
    2020-12-17 20:23:31 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0
    2020-12-17 20:23:31 temperature.c:763:calibration_sensor_offset: chain[2] temp info,Bad. Reload from eeprom..
    sensor type = 1,sensor num = 2
    sensor pos: 31 40 0 0 0 0
    sensor offset: -4 -3 0 0 0 0
    2020-12-17 20:23:32 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 20:23:32 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 20:23:32 temperature.c:818:calibration_sensor_offset: Chain[2] chip[31] use PIC middle temp offset=-4, typeID=55
    2020-12-17 20:23:32 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[2] Chip[31] local:0 remote:0 offset:-4
    2020-12-17 20:23:32 temperature.c:870:calibration_sensor_offset: Chain[2] Chip[31] get middle temp offset=-4 typeID=55
    2020-12-17 20:23:32 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 20:23:32 temperature.c:818:calibration_sensor_offset: Chain[2] chip[40] use PIC middle temp offset=-3, typeID=55
    2020-12-17 20:23:33 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[2] Chip[40] local:0 remote:0 offset:-3
    2020-12-17 20:23:33 temperature.c:870:calibration_sensor_offset: Chain[2] Chip[40] get middle temp offset=-3 typeID=55
    2020-12-17 20:23:33 asic.c:1153:set_baud: set baud=1
    2020-12-17 20:23:33 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 20:23:33 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 20:23:33 asic.c:1164:set_baud: read bc write is 0x82001a
    2020-12-17 20:23:33 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 20:23:33 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 20:23:33 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 20:23:33 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 20:23:33 driver-btm-soc.c:6509:bitmain_soc_init: set TICKET_MASK
    2020-12-17 20:23:34 temperature.c:2081:detect_startup_environment_temperature: Environment temperature: [29]
    2020-12-17 20:23:34 temperature.c:2098:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 1 times ...
    2020-12-17 20:23:45 temperature.c:2081:detect_startup_environment_temperature: Environment temperature: [29]
    2020-12-17 20:23:45 temperature.c:2098:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 2 times ...
    2020-12-17 20:23:58 temperature.c:2081:detect_startup_environment_temperature: Environment temperature: [29]
    2020-12-17 20:23:58 temperature.c:2098:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 3 times ...
    2020-12-17 20:24:08 driver-btm-soc.c:3884:set_clock_delay_control: set mode 0
    2020-12-17 20:24:08 driver-btm-soc.c:3903:set_clock_delay_control: core_data = 0x04
    2020-12-17 20:24:08 driver-btm-soc.c:3974:open_core_bm1393: Start Open Core!!
    2020-12-17 20:24:12 driver-btm-soc.c:4041:open_core_bm1393: End Open Core!!
    2020-12-17 20:24:13 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 125
    2020-12-17 20:24:21 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 150
    2020-12-17 20:24:25 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 175
    2020-12-17 20:24:27 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 200
    2020-12-17 20:24:29 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 225
    2020-12-17 20:24:36 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 250
    2020-12-17 20:24:42 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 275
    2020-12-17 20:24:46 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 300
    2020-12-17 20:24:50 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 325
    2020-12-17 20:24:54 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 350
    2020-12-17 20:24:56 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 375
    2020-12-17 20:25:00 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 20:25:00 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[1] increaseing the diff freq ...
    2020-12-17 20:25:00 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 1 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 20:25:00 driver-btm-soc.c:5255:increase_freq_by_eeprom_slowly: set chain 1 to working voltage
    2020-12-17 20:25:00 power.c:1309:slowly_set_working_power_t11: set chain 1 to working voltage:
    now setting chain[1]-volt[10.20]-data[026]
    now setting chain[1]-volt[10.17]-data[027]
    now setting chain[1]-volt[10.14]-data[028]
    now setting chain[1]-volt[10.11]-data[029]
    now setting chain[1]-volt[10.08]-data[030]
    now setting chain[1]-volt[10.02]-data[032]
    now setting chain[1]-volt[09.97]-data[034]
    now setting chain[1]-volt[09.95]-data[035]
    now setting chain[1]-volt[09.92]-data[036]
    2020-12-17 20:25:35 power.c:1331:slowly_set_working_power_t11: done!
    2020-12-17 20:25:35 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 125
    2020-12-17 20:25:43 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 150
    2020-12-17 20:25:45 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 175
    2020-12-17 20:25:47 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 200
    2020-12-17 20:25:49 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 225
    2020-12-17 20:25:52 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 250
    2020-12-17 20:25:59 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 275
    2020-12-17 20:26:07 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 300
    2020-12-17 20:26:10 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 325
    2020-12-17 20:26:13 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 350
    2020-12-17 20:26:16 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 375
    2020-12-17 20:26:18 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 20:26:18 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[2] increaseing the diff freq ...
    2020-12-17 20:26:18 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 2 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 20:26:18 driver-btm-soc.c:5255:increase_freq_by_eeprom_slowly: set chain 2 to working voltage
    2020-12-17 20:26:18 power.c:1309:slowly_set_working_power_t11: set chain 2 to working voltage:
    now setting chain[2]-volt[10.20]-data[026]
    now setting chain[2]-volt[10.17]-data[027]
    now setting 2020-12-17 20:26:24 dspic33ep16gs202.c:213:dsPIC33EP16GS202_pic_heart_beat: ERROR! failed on Chain[2] after 3 times try!
    chain[2]-volt[10.14]-data[028]
    now setting chain[2]-volt[10.11]-data[029]
    now setting chain[2]-volt[10.08]-data[030]
    now setting chain[2]-volt[10.02]-data[032]
    now setting chain[2]-volt[09.97]-data[034]
    now setting chain[2]-volt[09.95]-data[035]
    now setting chain[2]-volt[09.92]-data[036]
    2020-12-17 20:26:54 power.c:1331:slowly_set_working_power_t11: done!
    2020-12-17 20:26:54 driver-btm-soc.c:6545:bitmain_soc_init: set to working voltage...
    2020-12-17 20:26:54 power.c:1258:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage:
    now setting chain[1]-volt[09.92]-data[036] chain[2]-volt[09.92]-data[036]
    2020-12-17 20:26:56 power.c:1278:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage end!
    now setting chain[1]-volt[09.90]-data[036] chain[2]-volt[09.90]-data[036]
    2020-12-17 20:26:56 driver-btm-soc.c:4929:set_timeout: freq 375 final timeout=349
    2020-12-17 20:26:56 driver-btm-soc.c:2925:low_temp_process_parm_init: chip miner_type = [0]
    2020-12-17 20:26:56 driver-btm-soc.c:2925:low_temp_process_parm_init: chip miner_type = [0]
    2020-12-17 20:26:56 driver-btm-soc.c:3539:check_system_work: check system thread start...
    2020-12-17 20:26:56 driver-btm-soc.c:6614:bitmain_soc_init: Init done!
    2020-12-17 20:26:56 driver-btm-soc.c:7257:bitmain_soc_prepare: bitmain soc init success.
    2020-12-17 20:26:57 temperature.c:1542:read_temp_func: bring_up_pcb_temp = 34
    2020-12-17 20:26:57 driver-btm-soc.c:6932:send_job: Version num 1
    2020-12-17 20:27:06 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 20:27:22 temperature.c:1887:get_target_chip_temp: if startup in low temp environment: NO
    2020-12-17 20:27:22 temperature.c:1733:_get_target_chip_temp_t11: chip miner_type = [0]
    2020-12-17 20:27:22 temperature.c:1733:_get_target_chip_temp_t11: chip miner_type = [0]
    2020-12-17 20:31:55 driver-btm-soc.c:6282:need_mode2_startup: chain 1 rt_hash_rate 4353.94 ideal_hash_rate 4620
    2020-12-17 20:31:55 driver-btm-soc.c:6282:need_mode2_startup: chain 2 rt_hash_rate 3914.15 ideal_hash_rate 4507
    2020-12-17 20:49:21 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 20:50:36 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 20:56:28 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:01:55 driver-btm-soc.c:3679:check_system_work: 30 mins avg rate [09026], PCB temp [34 - 60], CHIP temp [59 - 86]
    2020-12-17 21:05:57 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:10:01 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:10:02 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:10:15 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:10:19 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:16:30 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:23:31 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:23:38 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:23:39 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:23:47 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:23:59 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:25:39 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:27:50 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:31:55 driver-btm-soc.c:3679:check_system_work: 30 mins avg rate [09009], PCB temp [34 - 60], CHIP temp [59 - 85]
    2020-12-17 21:38:09 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:43:14 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:43:23 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:43:27 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:43:27 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:46:02 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:46:05 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:46:11 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:46:14 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:47:46 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:48:40 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:49:15 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:50:49 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:50:57 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:51:22 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:51:22 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:51:33 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:51:58 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:52:39 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:52:40 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:52:42 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:52:50 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:52:56 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:53:02 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:53:04 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:53:05 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:53:41 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:55:00 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:56:23 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 21:57:31 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:01:56 driver-btm-soc.c:3679:check_system_work: 30 mins avg rate [08775], PCB temp [34 - 60], CHIP temp [58 - 85]
    2020-12-17 22:01:56 driver-btm-soc.c:3449:hash_rate_guard: hash rate guard triggered! pcb_lowest_temp: 0.0, avg_rate: 8774.7 < 8944.5 in 30min
    2020-12-17 22:01:56 driver-btm-soc.c:3373:volt_increase_for_mode0: chain[1] start reopen core for low temperature voltage increment
    2020-12-17 22:01:56 driver-btm-soc.c:3381:volt_increase_for_mode0: chain[1] voltage: 9.90, now set to: 10.00
    2020-12-17 22:01:56 power.c:232:set_working_voltage_by_chain: chain[1] working_voltage = 10.00
    2020-12-17 22:01:56 driver-btm-soc.c:6704:re_open_core_by_chain:
    re_open_core start!PWM 56
    2020-12-17 22:01:59 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 10.20 ...
    2020-12-17 22:02:01 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 22:02:01 asic.c:1176:set_baud_by_chain: chain 1 set baud=26
    2020-12-17 22:02:01 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x3a01, cmd_buf[2]=0x18000000, misc=0x3a01
    2020-12-17 22:02:01 asic.c:1184:set_baud_by_chain: read bc write is 0x81001a
    2020-12-17 22:02:01 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 1
    2020-12-17 22:02:01 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
    2020-12-17 22:02:02 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:02:04 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 1, find asic num = 60
    2020-12-17 22:02:07 driver-btm-soc.c:4630:set_freq_by_chain: chain[1] set freq:100.00
    2020-12-17 22:02:07 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 22:02:08 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 1
    2020-12-17 22:02:08 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 22:02:08 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 22:02:08 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 22:02:08 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 22:02:08 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 22:02:08 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[1] temp sensor info, correct!
    2020-12-17 22:02:08 temperature.c:748:check_eeprom_calibration_data: chain[1] no need to calibrate !
    2020-12-17 22:02:08 temperature.c:768:calibration_sensor_offset: chain[1] temp info,OK
    2020-12-17 22:02:08 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 22:02:08 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 22:02:08 temperature.c:818:calibration_sensor_offset: Chain[1] chip[31] use PIC middle temp offset=-4, typeID=55
    2020-12-17 22:02:09 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[31] local:0 remote:0 offset:-4
    2020-12-17 22:02:09 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[31] get middle temp offset=-4 typeID=55
    2020-12-17 22:02:09 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 22:02:09 temperature.c:818:calibration_sensor_offset: Chain[1] chip[40] use PIC middle temp offset=-3, typeID=55
    2020-12-17 22:02:09 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[40] local:0 remote:0 offset:-3
    2020-12-17 22:02:09 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-3 typeID=55
    2020-12-17 22:02:09 asic.c:1176:set_baud_by_chain: chain 1 set baud=1
    2020-12-17 22:02:09 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 22:02:09 asic.c:1184:set_baud_by_chain: read bc write is 0x81001a
    2020-12-17 22:02:09 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 22:02:09 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 22:02:09 driver-btm-soc.c:6741:re_open_core_by_chain: set TICKET_MASK
    2020-12-17 22:02:09 driver-btm-soc.c:3884:set_clock_delay_control: set mode 0
    2020-12-17 22:02:09 driver-btm-soc.c:3903:set_clock_delay_control: core_data = 0x04
    2020-12-17 22:02:09 driver-btm-soc.c:3917:set_clock_delay_control: single chain mode
    2020-12-17 22:02:09 driver-btm-soc.c:3974:open_core_bm1393: Start Open Core!!
    2020-12-17 22:02:11 driver-btm-soc.c:4041:open_core_bm1393: End Open Core!!
    2020-12-17 22:02:11 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 125
    2020-12-17 22:02:13 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 150
    2020-12-17 22:02:14 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 175
    2020-12-17 22:02:16 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 200
    2020-12-17 22:02:17 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 225
    2020-12-17 22:02:18 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 250
    2020-12-17 22:02:20 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 275
    2020-12-17 22:02:21 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 300
    2020-12-17 22:02:22 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 325
    2020-12-17 22:02:24 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 350
    2020-12-17 22:02:25 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 375
    2020-12-17 22:02:27 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 22:02:27 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[1] increaseing the diff freq ...
    2020-12-17 22:02:27 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 1 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 22:02:27 driver-btm-soc.c:4929:set_timeout: freq 375 final timeout=349
    2020-12-17 22:02:27 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7
    2020-12-17 22:02:27 driver-btm-soc.c:861:check_chain: !! chain[0]is exist
    2020-12-17 22:02:27 driver-btm-soc.c:861:check_chain: !! chain[1]is exist
    2020-12-17 22:02:27 driver-btm-soc.c:861:check_chain: !! chain[2]is exist
    2020-12-17 22:02:27 driver-btm-soc.c:6774:re_open_core_by_chain: reopen chain 1 finished, chain 1 chip temp 64 - 78
    2020-12-17 22:02:27 driver-btm-soc.c:6776:re_open_core_by_chain: all chain chip temp 60 - 83
    2020-12-17 22:02:28 driver-btm-soc.c:6796:re_open_core_by_chain: re_open_core done!
    2020-12-17 22:02:58 hash_rate.c:58:clear_queue: reset calc...
    2020-12-17 22:02:58 power.c:996:slowly_set_iic_power_to_working_voltage_by_chain: chain[1] slowly setting to voltage: 10.00 ...
    2020-12-17 22:02:59 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.20
    2020-12-17 22:03:02 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.20
    2020-12-17 22:03:05 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.17
    2020-12-17 22:03:08 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.14
    2020-12-17 22:03:12 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.11
    2020-12-17 22:03:15 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.08
    2020-12-17 22:03:18 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.05
    2020-12-17 22:03:19 driver-btm-soc.c:3373:volt_increase_for_mode0: chain[2] start reopen core for low temperature voltage increment
    2020-12-17 22:03:19 driver-btm-soc.c:3381:volt_increase_for_mode0: chain[2] voltage: 9.90, now set to: 10.00
    2020-12-17 22:03:19 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 10.00
    2020-12-17 22:03:19 driver-btm-soc.c:6704:re_open_core_by_chain:
    re_open_core start!PWM 52
    2020-12-17 22:03:21 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.20 ...
    2020-12-17 22:03:21 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 22:03:21 asic.c:1176:set_baud_by_chain: chain 2 set baud=26
    2020-12-17 22:03:21 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x3a01, cmd_buf[2]=0x18000000, misc=0x3a01
    2020-12-17 22:03:22 asic.c:1184:set_baud_by_chain: read bc write is 0x82001a
    2020-12-17 22:03:22 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 2
    2020-12-17 22:03:22 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:03:23 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:03:24 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 60
    2020-12-17 22:03:27 driver-btm-soc.c:4630:set_freq_by_chain: chain[2] set freq:100.00
    2020-12-17 22:03:27 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 22:03:28 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 22:03:28 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 22:03:28 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 22:03:28 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 22:03:28 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 22:03:28 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 22:03:28 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[2] temp sensor info, correct!
    2020-12-17 22:03:28 temperature.c:748:check_eeprom_calibration_data: chain[2] no need to calibrate !
    2020-12-17 22:03:28 temperature.c:768:calibration_sensor_offset: chain[2] temp info,OK
    2020-12-17 22:03:28 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 22:03:28 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 22:03:28 temperature.c:818:calibration_sensor_offset: Chain[2] chip[31] use PIC middle temp offset=-4, typeID=55
    2020-12-17 22:03:29 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[2] Chip[31] local:0 remote:0 offset:-4
    2020-12-17 22:03:29 temperature.c:870:calibration_sensor_offset: Chain[2] Chip[31] get middle temp offset=-4 typeID=55
    2020-12-17 22:03:29 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 22:03:29 temperature.c:818:calibration_sensor_offset: Chain[2] chip[40] use PIC middle temp offset=-3, typeID=55
    2020-12-17 22:03:29 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[2] Chip[40] local:0 remote:0 offset:-3
    2020-12-17 22:03:29 temperature.c:870:calibration_sensor_offset: Chain[2] Chip[40] get middle temp offset=-3 typeID=55
    2020-12-17 22:03:29 asic.c:1176:set_baud_by_chain: chain 2 set baud=1
    2020-12-17 22:03:29 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 22:03:29 asic.c:1184:set_baud_by_chain: read bc write is 0x82001a
    2020-12-17 22:03:29 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 22:03:29 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 22:03:29 driver-btm-soc.c:6741:re_open_core_by_chain: set TICKET_MASK
    2020-12-17 22:03:29 driver-btm-soc.c:3884:set_clock_delay_control: set mode 0
    2020-12-17 22:03:29 driver-btm-soc.c:3903:set_clock_delay_control: core_data = 0x04
    2020-12-17 22:03:29 driver-btm-soc.c:3917:set_clock_delay_control: single chain mode
    2020-12-17 22:03:29 driver-btm-soc.c:3974:open_core_bm1393: Start Open Core!!
    2020-12-17 22:03:32 driver-btm-soc.c:4041:open_core_bm1393: End Open Core!!
    2020-12-17 22:03:32 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 125
    2020-12-17 22:03:33 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 150
    2020-12-17 22:03:34 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 175
    2020-12-17 22:03:36 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 200
    2020-12-17 22:03:37 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 225
    2020-12-17 22:03:39 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 250
    2020-12-17 22:03:40 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 275
    2020-12-17 22:03:41 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 300
    2020-12-17 22:03:43 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 325
    2020-12-17 22:03:44 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 350
    2020-12-17 22:03:45 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[2] increase to 375
    2020-12-17 22:03:47 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 22:03:47 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[2] increaseing the diff freq ...
    2020-12-17 22:03:47 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 2 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 22:03:47 driver-btm-soc.c:4929:set_timeout: freq 375 final timeout=349
    2020-12-17 22:03:47 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7
    2020-12-17 22:03:47 driver-btm-soc.c:861:check_chain: !! chain[0]is exist
    2020-12-17 22:03:47 driver-btm-soc.c:861:check_chain: !! chain[1]is exist
    2020-12-17 22:03:47 driver-btm-soc.c:861:check_chain: !! chain[2]is exist
    2020-12-17 22:03:48 driver-btm-soc.c:6774:re_open_core_by_chain: reopen chain 2 finished, chain 2 chip temp 59 - 78
    2020-12-17 22:03:48 driver-btm-soc.c:6776:re_open_core_by_chain: all chain chip temp 59 - 87
    2020-12-17 22:03:48 driver-btm-soc.c:6796:re_open_core_by_chain: re_open_core done!
    2020-12-17 22:04:18 hash_rate.c:58:clear_queue: reset calc...
    2020-12-17 22:04:18 power.c:996:slowly_set_iic_power_to_working_voltage_by_chain: chain[2] slowly setting to voltage: 10.00 ...
    2020-12-17 22:04:19 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.20
    2020-12-17 22:04:22 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.20
    2020-12-17 22:04:25 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.17
    2020-12-17 22:04:28 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.14
    2020-12-17 22:04:31 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.11
    2020-12-17 22:04:35 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.08
    2020-12-17 22:04:38 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.05
    2020-12-17 22:05:22 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:05:38 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:05:46 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:05:57 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:05:59 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:09:38 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:12:04 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:13:25 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:13:40 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:13:46 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:13:54 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:13:57 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:13:59 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:14:09 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:14:13 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:14:48 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:14:53 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:14:59 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:24:00 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:24:04 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:24:13 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:24:21 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:24:41 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:25:19 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:25:33 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:25:46 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:25:52 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:25:53 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:25:59 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:26:02 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:26:03 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:26:03 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:26:04 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:26:07 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:26:11 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:26:31 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:26:52 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:27:12 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:27:21 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:27:25 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:27:25 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:27:33 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:27:39 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:27:46 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:27:52 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:27:53 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:27:54 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:28:08 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:28:16 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:28:21 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:28:24 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:28:25 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:28:30 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:29:07 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:29:19 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:29:24 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:29:37 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:29:46 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:29:55 driver-btm-soc.c:4260:get_nonce_and_register: !!! REG_TYPE = 1
    2020-12-17 22:30:23 temperature.c:1260:detect_pcb_chip_over_temp: chain[2] start to check asic nums, due to read temp failed
    2020-12-17 22:30:25 temperature.c:1264:detect_pcb_chip_over_temp: chain[2] asic[0], need reopen core
    2020-12-17 22:30:25 driver-btm-soc.c:3559:check_system_work: Error: read temp failed, need reopen core!
    2020-12-17 22:30:25 driver-btm-soc.c:6623:reopen_core_for_temp_senor: reopen start to initialize temp sensors!PWM 72
    2020-12-17 22:30:25 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7
    2020-12-17 22:30:25 driver-btm-soc.c:861:check_chain: !! chain[0]is exist
    2020-12-17 22:30:25 driver-btm-soc.c:861:check_chain: !! chain[1]is exist
    2020-12-17 22:30:25 driver-btm-soc.c:861:check_chain: !! chain[2]is exist
    2020-12-17 22:30:27 driver-btm-soc.c:6112:init_miner_version: FPGA Version = 0xB00D
    2020-12-17 22:30:45 power.c:185:power_init: power init ...
    2020-12-17 22:30:45 driver-btm-soc.c:5560:update_highest_voltage: chain 0 hpf working voltage 9.90
    2020-12-17 22:30:45 driver-btm-soc.c:5560:update_highest_voltage: chain 1 hpf working voltage 9.90
    2020-12-17 22:30:45 driver-btm-soc.c:5560:update_highest_voltage: chain 2 hpf working voltage 9.90
    2020-12-17 22:30:45 driver-btm-soc.c:5569:update_highest_voltage: open core at max voltage 10.20
    2020-12-17 22:30:45 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 10.20 ...
    2020-12-17 22:30:46 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 22:30:46 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 10.20 ...
    2020-12-17 22:30:47 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 22:30:47 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.20 ...
    2020-12-17 22:30:48 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 22:30:48 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 0
    2020-12-17 22:30:48 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
    2020-12-17 22:31:20 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:31:23 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 0, find asic num = 44
    2020-12-17 22:31:23 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
    2020-12-17 22:31:24 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:31:26 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 0, find asic num = 44
    2020-12-17 22:31:26 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
    2020-12-17 22:31:27 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:31:28 driver-btm-soc.c:3815:check_asic_num: check asic num with pre_open_core
    2020-12-17 22:31:28 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
    2020-12-17 22:31:28 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
    2020-12-17 22:31:29 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:31:30 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 0
    2020-12-17 22:31:30 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 22:31:30 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 0
    2020-12-17 22:31:32 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 0, find asic num = 44
    2020-12-17 22:31:32 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
    2020-12-17 22:31:32 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
    2020-12-17 22:31:33 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:31:34 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 0
    2020-12-17 22:31:34 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 22:31:34 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 0
    2020-12-17 22:31:35 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 0, find asic num = 44
    2020-12-17 22:31:36 driver-btm-soc.c:3837:check_asic_num: chian 0 check asic number failed!
    2020-12-17 22:31:36 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 1
    2020-12-17 22:31:37 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
    2020-12-17 22:32:08 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:32:10 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 1, find asic num = 60
    2020-12-17 22:32:13 driver-btm-soc.c:4630:set_freq_by_chain: chain[1] set freq:100.00
    2020-12-17 22:32:13 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 22:32:14 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 1
    2020-12-17 22:32:14 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 22:32:14 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 22:32:14 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 22:32:14 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 22:32:14 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 22:32:14 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[1] temp sensor info, correct!
    2020-12-17 22:32:14 temperature.c:748:check_eeprom_calibration_data: chain[1] no need to calibrate !
    2020-12-17 22:32:14 temperature.c:768:calibration_sensor_offset: chain[1] temp info,OK
    2020-12-17 22:32:14 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 22:32:14 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 22:32:14 temperature.c:818:calibration_sensor_offset: Chain[1] chip[31] use PIC middle temp offset=-4, typeID=55
    2020-12-17 22:32:15 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[31] local:0 remote:0 offset:-4
    2020-12-17 22:32:15 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[31] get middle temp offset=-4 typeID=55
    2020-12-17 22:32:15 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 22:32:15 temperature.c:818:calibration_sensor_offset: Chain[1] chip[40] use PIC middle temp offset=-3, typeID=55
    2020-12-17 22:32:15 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[40] local:0 remote:0 offset:-3
    2020-12-17 22:32:15 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-3 typeID=55
    2020-12-17 22:32:15 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 2
    2020-12-17 22:32:16 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:32:47 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:32:50 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 0
    2020-12-17 22:32:50 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:32:51 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:32:53 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 0
    2020-12-17 22:32:53 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:32:54 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:32:55 driver-btm-soc.c:3815:check_asic_num: check asic num with pre_open_core
    2020-12-17 22:32:55 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
    2020-12-17 22:32:55 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:32:56 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:32:57 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 22:32:57 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 22:32:57 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 22:32:57 driver-btm-soc.c:1854:check_asic_reg_oneChain: crc is 0x4, but it should be 0x13
    2020-12-17 22:32:59 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 46
    2020-12-17 22:32:59 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
    2020-12-17 22:32:59 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:33:00 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:33:01 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 22:33:01 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 22:33:01 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 22:33:02 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 0
    2020-12-17 22:33:03 driver-btm-soc.c:3837:check_asic_num: chian 2 check asic number failed!
    2020-12-17 22:33:03 asic.c:1153:set_baud: set baud=1
    2020-12-17 22:33:03 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 22:33:03 asic.c:1164:set_baud: read bc write is 0x81001a
    2020-12-17 22:33:03 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 22:33:03 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 22:33:03 driver-btm-soc.c:6659:reopen_core_for_temp_senor: set TICKET_MASK
    2020-12-17 22:33:03 driver-btm-soc.c:3884:set_clock_delay_control: set mode 0
    2020-12-17 22:33:03 driver-btm-soc.c:3903:set_clock_delay_control: core_data = 0x04
    2020-12-17 22:33:03 driver-btm-soc.c:3974:open_core_bm1393: Start Open Core!!
    2020-12-17 22:33:05 driver-btm-soc.c:4041:open_core_bm1393: End Open Core!!
    2020-12-17 22:33:05 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 125
    2020-12-17 22:33:06 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 150
    2020-12-17 22:33:08 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 175
    2020-12-17 22:33:09 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 200
    2020-12-17 22:33:10 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 225
    2020-12-17 22:33:12 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 250
    2020-12-17 22:33:13 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 275
    2020-12-17 22:33:14 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 300
    2020-12-17 22:33:16 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 325
    2020-12-17 22:33:17 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 350
    2020-12-17 22:33:19 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 375
    2020-12-17 22:33:20 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 22:33:20 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[1] increaseing the diff freq ...
    2020-12-17 22:33:20 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 1 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 22:33:20 driver-btm-soc.c:4929:set_timeout: freq 375 final timeout=349
    2020-12-17 22:33:21 driver-btm-soc.c:6682:reopen_core_for_temp_senor: while re_open, all chain chip temp 60 - 62
    2020-12-17 22:33:21 driver-btm-soc.c:6686:reopen_core_for_temp_senor: set to working voltage...
    2020-12-17 22:33:21 power.c:1258:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage:
    now setting chain[1]-volt[10.17]-data[027]
    now setting chain[1]-volt[10.11]-data[029]
    now setting chain[1]-volt[10.05]-data[031]
    now setting chain[1]-volt[10.00]-data[033]
    now setting chain[1]-volt[09.95]-data[035]
    now setting chain[1]-volt[09.90]-data[037]
    now setting chain[1]-volt[09.85]-data[039]
    now setting chain[1]-volt[09.83]-data[040]
    now setting chain[1]-volt[09.81]-data[041]
    2020-12-17 22:33:43 power.c:1278:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage end!
    now setting chain[1]-volt[09.80]-data[041]
    2020-12-17 22:33:44 driver-btm-soc.c:6697:reopen_core_for_temp_senor: reopen core done
    2020-12-17 22:33:54 hash_rate.c:58:clear_queue: reset calc...
    2020-12-17 22:38:07 driver-btm-soc.c:3679:check_system_work: 30 mins avg rate [04343], PCB temp [32 - 64], CHIP temp [59 - 91]
    2020-12-17 22:38:07 driver-btm-soc.c:3449:hash_rate_guard: hash rate guard triggered! pcb_lowest_temp: 0.0, avg_rate: 4343.1 < 4527.6 in 30min
    2020-12-17 22:38:07 driver-btm-soc.c:3373:volt_increase_for_mode0: chain[1] start reopen core for low temperature voltage increment
    2020-12-17 22:38:07 driver-btm-soc.c:3381:volt_increase_for_mode0: chain[1] voltage: 9.80, now set to: 9.90
    2020-12-17 22:38:07 power.c:232:set_working_voltage_by_chain: chain[1] working_voltage = 9.90
    2020-12-17 22:38:07 driver-btm-soc.c:6704:re_open_core_by_chain:
    re_open_core start!PWM 52
    2020-12-17 22:38:09 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 10.20 ...
    2020-12-17 22:38:10 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 22:38:10 asic.c:1176:set_baud_by_chain: chain 1 set baud=26
    2020-12-17 22:38:10 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x3a01, cmd_buf[2]=0x18000000, misc=0x3a01
    2020-12-17 22:38:10 asic.c:1184:set_baud_by_chain: read bc write is 0x81001a
    2020-12-17 22:38:10 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 1
    2020-12-17 22:38:10 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
    2020-12-17 22:38:11 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:38:12 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 1, find asic num = 60
    2020-12-17 22:38:16 driver-btm-soc.c:4630:set_freq_by_chain: chain[1] set freq:100.00
    2020-12-17 22:38:16 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 13
    2020-12-17 22:38:16 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 1
    2020-12-17 22:38:16 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ...
    2020-12-17 22:38:16 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451
    2020-12-17 22:38:17 temperature.c:618:is_eeprom_tempsensor_data_correct: 2
    2020-12-17 22:38:17 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2
    2020-12-17 22:38:17 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0
    2020-12-17 22:38:17 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[1] temp sensor info, correct!
    2020-12-17 22:38:17 temperature.c:748:check_eeprom_calibration_data: chain[1] no need to calibrate !
    2020-12-17 22:38:17 temperature.c:768:calibration_sensor_offset: chain[1] temp info,OK
    2020-12-17 22:38:17 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it!
    2020-12-17 22:38:17 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61
    2020-12-17 22:38:17 temperature.c:818:calibration_sensor_offset: Chain[1] chip[31] use PIC middle temp offset=-4, typeID=55
    2020-12-17 22:38:17 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[31] local:0 remote:0 offset:-4
    2020-12-17 22:38:17 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[31] get middle temp offset=-4 typeID=55
    2020-12-17 22:38:17 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61
    2020-12-17 22:38:17 temperature.c:818:calibration_sensor_offset: Chain[1] chip[40] use PIC middle temp offset=-3, typeID=55
    2020-12-17 22:38:18 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[40] local:0 remote:0 offset:-3
    2020-12-17 22:38:18 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-3 typeID=55
    2020-12-17 22:38:18 asic.c:1176:set_baud_by_chain: chain 1 set baud=1
    2020-12-17 22:38:18 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
    2020-12-17 22:38:18 asic.c:1184:set_baud_by_chain: read bc write is 0x81001a
    2020-12-17 22:38:18 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161
    2020-12-17 22:38:18 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161
    2020-12-17 22:38:18 driver-btm-soc.c:6741:re_open_core_by_chain: set TICKET_MASK
    2020-12-17 22:38:18 driver-btm-soc.c:3884:set_clock_delay_control: set mode 0
    2020-12-17 22:38:18 driver-btm-soc.c:3903:set_clock_delay_control: core_data = 0x04
    2020-12-17 22:38:18 driver-btm-soc.c:3917:set_clock_delay_control: single chain mode
    2020-12-17 22:38:18 driver-btm-soc.c:3974:open_core_bm1393: Start Open Core!!
    2020-12-17 22:38:20 driver-btm-soc.c:4041:open_core_bm1393: End Open Core!!
    2020-12-17 22:38:20 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 125
    2020-12-17 22:38:21 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 150
    2020-12-17 22:38:23 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 175
    2020-12-17 22:38:24 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 200
    2020-12-17 22:38:26 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 225
    2020-12-17 22:38:27 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 250
    2020-12-17 22:38:28 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 275
    2020-12-17 22:38:30 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 300
    2020-12-17 22:38:31 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 325
    2020-12-17 22:38:32 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 350
    2020-12-17 22:38:34 driver-btm-soc.c:5193:increase_freq_by_eeprom_slowly: chain[1] increase to 375
    2020-12-17 22:38:35 driver-btm-soc.c:5209:increase_freq_by_eeprom_slowly: max = 375 ,min = 375
    2020-12-17 22:38:35 driver-btm-soc.c:5215:increase_freq_by_eeprom_slowly: chain[1] increaseing the diff freq ...
    2020-12-17 22:38:35 driver-btm-soc.c:5243:increase_freq_by_eeprom_slowly: chain 1 final freq setting:
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    375 375 375 375 375 375 375 375 375 375
    2020-12-17 22:38:35 driver-btm-soc.c:4929:set_timeout: freq 375 final timeout=349
    2020-12-17 22:38:35 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7
    2020-12-17 22:38:35 driver-btm-soc.c:861:check_chain: !! chain[0]is exist
    2020-12-17 22:38:35 driver-btm-soc.c:861:check_chain: !! chain[1]is exist
    2020-12-17 22:38:35 driver-btm-soc.c:861:check_chain: !! chain[2]is exist
    2020-12-17 22:38:42 driver-btm-soc.c:6774:re_open_core_by_chain: reopen chain 1 finished, chain 1 chip temp 65 - 79
    2020-12-17 22:38:42 driver-btm-soc.c:6776:re_open_core_by_chain: all chain chip temp 62 - 84
    2020-12-17 22:38:42 driver-btm-soc.c:6796:re_open_core_by_chain: re_open_core done!
    2020-12-17 22:38:55 temperature.c:1260:detect_pcb_chip_over_temp: chain[2] start to check asic nums, due to read temp failed
    2020-12-17 22:38:56 temperature.c:1264:detect_pcb_chip_over_temp: chain[2] asic[0], need reopen core
    2020-12-17 22:39:11 temperature.c:1260:detect_pcb_chip_over_temp: chain[2] start to check asic nums, due to read temp failed
    2020-12-17 22:39:12 hash_rate.c:58:clear_queue: reset calc...
    2020-12-17 22:39:12 power.c:996:slowly_set_iic_power_to_working_voltage_by_chain: chain[1] slowly setting to voltage: 09.90 ...
    2020-12-17 22:39:12 temperature.c:1264:detect_pcb_chip_over_temp: chain[2] asic[0], need reopen core
    2020-12-17 22:39:13 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.20
    2020-12-17 22:39:16 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.20
    2020-12-17 22:39:19 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.17
    2020-12-17 22:39:22 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.14
    2020-12-17 22:39:26 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.11
    2020-12-17 22:39:27 temperature.c:1260:detect_pcb_chip_over_temp: chain[2] start to check asic nums, due to read temp failed
    2020-12-17 22:39:29 temperature.c:1264:detect_pcb_chip_over_temp: chain[2] asic[0], need reopen core
    2020-12-17 22:39:29 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.08
    2020-12-17 22:39:32 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 10.02
    2020-12-17 22:39:35 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.97
    2020-12-17 22:39:39 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.95
    2020-12-17 22:39:40 driver-btm-soc.c:3373:volt_increase_for_mode0: chain[2] start reopen core for low temperature voltage increment
    2020-12-17 22:39:40 driver-btm-soc.c:3376:volt_increase_for_mode0: chain[2] voltage: 10.20, now set to: 10.30
    2020-12-17 22:39:40 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 10.30
    2020-12-17 22:39:40 driver-btm-soc.c:6704:re_open_core_by_chain:
    re_open_core start!PWM 52
    2020-12-17 22:39:44 temperature.c:1260:detect_pcb_chip_over_temp: chain[2] start to check asic nums, due to read temp failed
    2020-12-17 22:39:45 temperature.c:1264:detect_pcb_chip_over_temp: chain[2] asic[0], need reopen core
    2020-12-17 22:39:47 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.20 ...
    2020-12-17 22:39:48 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20
    2020-12-17 22:39:48 asic.c:1176:set_baud_by_chain: chain 2 set baud=26
    2020-12-17 22:39:48 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x3a01, cmd_buf[2]=0x18000000, misc=0x3a01
    2020-12-17 22:39:48 asic.c:1184:set_baud_by_chain: read bc write is 0x82001a
    2020-12-17 22:39:48 driver-btm-soc.c:6141:bring_up_chain:

    bring up chain 2
    2020-12-17 22:39:48 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:39:49 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:39:51 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 0
    2020-12-17 22:39:51 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:39:52 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:39:54 driver-btm-soc.c:3807:check_asic_num: without pre_open_core chain 2, find asic num = 0
    2020-12-17 22:39:54 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:39:55 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:39:56 driver-btm-soc.c:3815:check_asic_num: check asic num with pre_open_core
    2020-12-17 22:39:56 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
    2020-12-17 22:39:56 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:39:57 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:39:58 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 22:39:58 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 22:39:59 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 22:40:00 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 0
    2020-12-17 22:40:00 driver-btm-soc.c:3780:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
    2020-12-17 22:40:00 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
    2020-12-17 22:40:01 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
    2020-12-17 22:40:02 driver-btm-soc.c:3748:check_asic_num_without_power_off: Open 5 core for chain 2
    2020-12-17 22:40:02 driver-btm-soc.c:3853:open_core_BM1393_pre_open: pre open core = 5
    2020-12-17 22:40:02 driver-btm-soc.c:3733:pre_open_core_one_chain: for chain 2
    2020-12-17 22:40:03 driver-btm-soc.c:3754:check_asic_num_without_power_off: chain 2, find asic num = 0
    2020-12-17 22:40:04 driver-btm-soc.c:3837:check_asic_num: chian 2 check asic number failed!
    2020-12-17 22:40:34 hash_rate.c:58:clear_queue: reset calc...
    2020-12-17 22:40:34 power.c:988:slowly_set_iic_power_to_working_voltage_by_chain: error! chain[2] does not exist!
    2020-12-17 22:40:34 driver-btm-soc.c:3559:check_system_work: Error: read temp failed, need reopen core!
    2020-12-17 22:40:34 driver-btm-soc.c:6623:reopen_core_for_temp_senor: reopen start to initialize temp sensors!PWM 52

    0
    评论操作 固定链接
  • Eleazar Villanueva

    Hello????

    0
    评论操作 固定链接
  • Eleazar Villanueva

    Bitmain and its people don't care about their customers?

    0
    评论操作 固定链接

请先登录再写评论。

没有找到您要找的？

新建帖子