S19 HashRate drops to 0. REG_TYPE error.

评论

11 条评论

  • 正式评论

    Hello, any similar problem you can contact us at support-cs@bitmain.com for further check.

    评论操作 固定链接

    Hello,Terrance

    The kernel log above is not a complete one,would you please show me a complete kernel log here and I will help with remote diagnosis here,thank you very much! 

    0
    评论操作 固定链接

    I have S19 Pro. It works fine for about 1 hour and then breaks. Hash rate becomes zero on all 3 boards at the same time. I have this on 8 different miners and all these miners are brand new. Just got them a couple of days ago. What could be the problem?

     

    ANTMINER
    Dashboard
    Miner Setting
    IP Setting
    System
    Miner Log
    Antminer S19 Pro Algorithm SHA256dOnlineLocate miner Refresh Timer 2021-01-08 02:13:39 English
    Current logHistory log


    free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
    pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 209572K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19804K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090e410 (9242 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b3cda0 ( 244 kB)
    .bss : 0xc0b3cda0 - 0xc0b77024 ( 233 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 6732K (cd466000 - cdaf9000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: disable subpage write
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: NAND_ECC_HW
    nand: NAND_ECC_HW_SYNDROME
    mtd->writesize = 2048
    ecc->strength = 1
    ecc->size = 2048
    mtd->writesize = 2048
    chip->ecc_strength_ds = 4
    chip->ecc_step_ds = 512
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    8 ofpart partitions found on MTD device pl35x-nand
    Creating 8 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000005200000 : "sig"
    0x000005200000-0x000006000000 : "reserve1"
    0x000006000000-0x000007000000 : "upgrade-ramfs"
    0x000007000000-0x00000a800000 : "upgrade-file"
    0x00000a800000-0x000010000000 : "reserve2"
    nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
    ip_tables: (C) 2000-2006 Netfilter Core Team
    NET: Registered protocol family 10
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
    devpts: called with bogus options
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 262741923
    ubi0: available PEBs: 36, total reserved PEBs: 28, PEBs reserved for bad PEB handling: 4
    ubi0: background thread "ubi_bgt0d" started, PID 729
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
    UBIFS (ubi0:0): recovery needed
    UBIFS (ubi0:0): recovery completed
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
    ubi2: attaching mtd4
    ubi2: scanning is finished
    ubi2: attached mtd4 (name "reserve1", size 14 MiB)
    ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
    ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1763350329
    ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
    ubi2: background thread "ubi_bgt2d" started, PID 740
    UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
    UBIFS (ubi2:0): recovery needed
    UBIFS (ubi2:0): recovery completed
    UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
    UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
    UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
    UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 06C76C06-3EBC-4367-8BE6-441752764B7A, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    random: avahi-daemon urandom read with 2 bits of entropy available
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfbc8000
    *base_vir_addr = 0xb031
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized


    ===========================================Miner log===========================================
    1970-01-01 00:00:10 Miner compile time: Mon Oct 26 17:55:33 CST 2020 type: Antminer S19 Pro
    1970-01-01 00:00:11 This is fix-freq version
    1970-01-01 00:00:11 Miner compile time: Mon Oct 26 17:55:33 CST 2020 type: Antminer S19 Pro
    1970-01-01 00:00:11 commit version: 62e4736 2020-09-21 11:17:56, build by: jenkins 2020-10-26 18:06:03
    1970-01-01 00:00:11 opt_multi_version = 1
    1970-01-01 00:00:11 opt_bitmain_ab = 1
    1970-01-01 00:00:11 mid_auto_gen = 0
    1970-01-01 00:00:11 opt_bitmain_work_mode = 0
    1970-01-01 00:00:11 mmap fpga_mem_addr_hal = 0xb5900000
    1970-01-01 00:00:11 HASH_ON_PLUG V9 = 0x7
    1970-01-01 00:00:11 Note: front fan is power on!
    1970-01-01 00:00:11 Note: rear fan is power on!
    1970-01-01 00:00:11 start the http log.
    1970-01-01 00:00:11 httpListenThread start ret=0
    1970-01-01 00:00:11 start listen on 6060 ...
    1970-01-01 00:00:11 load machine NBP1901 conf
    1970-01-01 00:00:11 machine : NBP1901
    1970-01-01 00:00:11 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
    2021-01-08 09:40:03 miner ID : 8024ec042b104814
    2021-01-08 09:40:03 FPGA Version = 0xB031
    2021-01-08 09:40:03 HASH_ON_PLUG V9 = 0x7
    2021-01-08 09:40:03 ==========================capability start==========================
    2021-01-08 09:40:03 board num = 3
    2021-01-08 09:40:03 board id = 0, chain num = 1
    2021-01-08 09:40:03 chain id = 0
    2021-01-08 09:40:03 board id = 1, chain num = 1
    2021-01-08 09:40:03 chain id = 1
    2021-01-08 09:40:03 board id = 2, chain num = 1
    2021-01-08 09:40:03 chain id = 2
    2021-01-08 09:40:03 ==========================capability end============================
    2021-01-08 09:40:03 chain num = 3
    2021-01-08 09:40:04 [chain 0]
    2021-01-08 09:40:04 0x0000 11 42 95 42 A2 BF 48 C1 31 67 24 07 4A 7C 7F EC
    2021-01-08 09:40:04 0x0010 3C 6D C5 25 B6 5C 1A 7D C6 3E 57 1A D5 F0 54 5D
    2021-01-08 09:40:04 0x0020 E5 BB 8B 1C E4 90 F3 51 BE 31 C3 D6 F1 88 91 46
    2021-01-08 09:40:04 0x0030 45 07 54 A7 5E 66 0A 20 83 05 8D 1A E5 99 3C 33
    2021-01-08 09:40:04 0x0040 A9 30 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:04 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:04 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:04 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:04 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:04 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:04 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:04 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:04 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:04 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:04 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:04 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
    2021-01-08 09:40:04
    2021-01-08 09:40:06 [chain 1]
    2021-01-08 09:40:06 0x0000 11 42 58 A7 F1 7F 6A 25 6E C0 D6 FC 6B 44 BC 29
    2021-01-08 09:40:06 0x0010 A2 89 4A 2C 6B 0B 7A FD 11 96 BE DF 2C 7D 8D 84
    2021-01-08 09:40:06 0x0020 3E 5D D4 CA 6A 80 77 5D 53 A8 D7 96 AC 78 73 9D
    2021-01-08 09:40:06 0x0030 B7 3D 67 F6 34 95 69 C5 53 71 CD AE 52 10 C4 7B
    2021-01-08 09:40:06 0x0040 8F 42 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:06 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:06 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:06 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:06 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:06 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:06 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:06 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:06 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:06 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:06 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:06 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
    2021-01-08 09:40:06
    2021-01-08 09:40:08 [chain 2]
    2021-01-08 09:40:08 0x0000 11 42 19 38 5A E6 6D 24 A5 16 13 DA 6F B2 A2 7B
    2021-01-08 09:40:08 0x0010 75 82 7D B0 42 A2 E1 47 06 BE 29 4A 14 0D 8D 65
    2021-01-08 09:40:08 0x0020 CD FF 9C FB 64 4D 02 B8 76 26 6A 40 77 B7 1B 88
    2021-01-08 09:40:08 0x0030 4F D9 20 28 9C 6F 5D C9 A9 A4 79 BE 70 16 F8 73
    2021-01-08 09:40:08 0x0040 C2 5F FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:08 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:08 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:08 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:08 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:08 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:08 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:08 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:08 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:08 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:08 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-01-08 09:40:08 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
    2021-01-08 09:40:08
    2021-01-08 09:40:08 fan_eft : 0 fan_pwm : 100
    2021-01-08 09:40:08 create thread
    2021-01-08 09:40:08 fixed working voltage = 1260
    2021-01-08 09:40:08 Chain [0] PCB Version: 0x0100
    2021-01-08 09:40:08 Chain [0] BOM Version: 0x0100
    2021-01-08 09:40:08 Chain [1] PCB Version: 0x0100
    2021-01-08 09:40:08 Chain [1] BOM Version: 0x0100
    2021-01-08 09:40:08 Chain [2] PCB Version: 0x0100
    2021-01-08 09:40:08 Chain [2] BOM Version: 0x0100
    2021-01-08 09:40:12 Fan check passed.
    2021-01-08 09:40:13 chain[0] PIC jump to app
    2021-01-08 09:40:14 Check chain[0] PIC fw version=0x89
    2021-01-08 09:40:16 chain[1] PIC jump to app
    2021-01-08 09:40:17 Check chain[1] PIC fw version=0x89
    2021-01-08 09:40:18 chain[2] PIC jump to app
    2021-01-08 09:40:20 Check chain[2] PIC fw version=0x89
    2021-01-08 09:40:20 create thread
    2021-01-08 09:40:20 max sensor num = 4
    2021-01-08 09:40:20 temperature_monitor_thread start...
    2021-01-08 09:40:24 power type version: 0x0071
    2021-01-08 09:40:24 Enter sleep to make sure power release finish.
    2021-01-08 09:41:34 Slept 69 seconds, diff = 5.
    2021-01-08 09:41:34 set_voltage_by_steps to 1500.
    2021-01-08 09:41:37 start up min temp by 75a = 27
    2021-01-08 09:41:37 set UART baud to 115200
    2021-01-08 09:41:45 Chain[0]: find 114 asic, times 0
    2021-01-08 09:41:53 Chain[1]: find 114 asic, times 0
    2021-01-08 09:42:01 Chain[2]: find 114 asic, times 0
    2021-01-08 09:42:01 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 1
    2021-01-08 09:42:05 min freq in eeprom = 525
    2021-01-08 09:42:05 fixed frequency is 525
    2021-01-08 09:42:05 Bring up temperature is 29
    2021-01-08 09:42:05 set UART baud to 12000000
    2021-01-08 09:42:06 set_voltage_by_steps to 1260.
    2021-01-08 09:42:13 STATUS_INITED: soc init done!
    2021-01-08 09:42:13 create thread
    2021-01-08 09:42:13 create thread
    2021-01-08 09:42:15 start to init...
    2021-01-08 09:42:23 Init done!
    2021-01-08 09:42:23 STATUS_OKAY
    2021-01-08 09:42:23 start the cached job
    2021-01-08 09:42:23 Version num 8
    2021-01-08 09:42:23 Mask num 0xe000
    2021-01-08 09:42:23 freq = 525, percent = 90, hcn = 12480, timeout = 449
    2021-01-08 09:42:23 set_start_time_point total_tv_start_sys=159 total_tv_end_sys=160
    2021-01-08 10:12:14 avg rate is lower than ideal rate, 64074.50 in 29 mins
    Firmware version Mon Oct 26 17:55:33 CST 2020 IP address 10.1.11.174 MAC A6:3E:D0:7A:9F:53 Type Release

    0
    评论操作 固定链接

    Hi, 

    Same here for me .

    2021-08-13 16:52:02 !!! reg crc error

    2021-08-13 16:52:02 !!! reg crc error

    2021-08-13 16:52:02 !!! reg crc error

    2021-08-13 16:52:02 !!! reg crc error

    2021-08-13 16:52:02 !!! reg crc error

    2021-08-13 16:52:02 !!! reg crc error

    2021-08-13 16:52:02 !!! reg crc error

    2021-08-13 16:52:09 chain avg vol drop to 0.89

    2021-08-13 16:52:58 set_voltage_by_steps to 1392.

    2021-08-13 16:53:46 set_voltage_by_steps to 1404.

    2021-08-13 16:54:03 30m avg rate is 95119.63 in 30 mins

    2021-08-13 16:54:32 chain avg vol rise to 13.65



    What was your fix? 

     

    Thanks

    0
    评论操作 固定链接
    Good afternoon. Please tell me if you have solved the problem with the miner. If so, how? I have the same problem with the S19. thanks
    -1
    评论操作 固定链接

    Hello, I am having the same problem with 20 miners. The same thing happens to them, I attach the miner's log, it is the same error in all miners, has someone already solved it?

    ------

    021-10-08 18:07:55 chain avg vol rise to 15.28

    2021-10-08 18:07:59 Chain[0]: find 76 asic, times 0

    2021-10-08 18:08:06 Chain[1]: find 76 asic, times 0

    2021-10-08 18:08:14 Chain[2]: find 76 asic, times 0

    2021-10-08 18:08:14 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 0

    2021-10-08 18:08:17 min freq in eeprom = 675

    2021-10-08 18:08:17 fixed frequency is 675

    2021-10-08 18:08:17 Bring up temperature is 22

    2021-10-08 18:08:17 set UART baud to 12000000

    2021-10-08 18:08:18 set_voltage_by_steps to 1380.

    2021-10-08 18:08:25 STATUS_INITED: soc init done!

    2021-10-08 18:08:25 create thread

    2021-10-08 18:08:25 create thread

    2021-10-08 18:08:28 start to init...

    2021-10-08 18:08:38 Init done!

    2021-10-08 18:08:38 STATUS_OKAY

    2021-10-08 18:08:38 start the cached job

    2021-10-08 18:08:38 Version num 8

    2021-10-08 18:08:38 Mask num 0xe000

    2021-10-08 18:08:38 freq = 675, percent = 90, hcn = 14560, timeout = 524

    2021-10-08 18:08:38 set_start_time_point total_tv_start_sys=149 total_tv_end_sys=150

    2021-10-08 18:08:38 set_voltage_by_steps to 1400.

    2021-10-08 18:09:47 set_voltage_by_steps to 1380.

    2021-10-08 18:23:25 !!! REG_TYPE = 1. 1472221697

    2021-10-08 18:23:34 chain avg vol drop to 1.40

    2021-10-08 18:27:26 chain avg vol rise to 14.03

    2021-10-08 18:38:25 avg rate is lower than ideal rate, 47315.32 in 29 mins

    2021-10-08 18:53:26 chain 0 hash rate 0.00 low in 15 mins

    2021-10-08 18:53:26 chain 1 hash rate 0.00 low in 15 mins

    2021-10-08 18:53:26 chain 2 hash rate 0.00 low in 15 mins

    2021-10-08 19:08:27 avg rate is lower than ideal rate, 0.00 in 30 mins

     

    0
    评论操作 固定链接
    Is your power supply going through a stabilizer?
     
     
     
     
     
     
     
    0
    评论操作 固定链接

    No. Issue was +91' on Outlet temperature, fixed with a better Aeration management 

    0
    评论操作 固定链接

    hi there. i have a trouble with S19. frequency is 200 fnd hashrate being abnormal. firmware could help, but dont. can you give me some advice?

    0
    评论操作 固定链接

    Issue was +91' on Outlet temperature, fixed with a better Aeration management 

    0
    评论操作 固定链接

    Hello, any similar problem you can contact us at support-cs@bitmain.com for further check.

     
    0
    评论操作 固定链接

请先登录再写评论。