S17 Socket connect failed: Connection refused

Paulosssantos

2020年07月05日 12:56

Dear all,

My miner stopped working.

Steps I've already taken but without success:

1- Download and reload the firmware -> done but didn't solve

2- Check your mining pool URLs and settings very carefully -> well configured

3- Confirm that your internet and network is stable -> good internet

4- Check the voltage on the front and rear fans -> all working

5- Reset the miner -> done but didn't solve

Please see "Kernel Log" below:

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203608K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25768K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12728K (cce93000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 34/15, WL threshold: 4096, image sequence number: 306349061
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 038216C1-D266-46DA-A76E-C04B142933A3, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 348/103, WL threshold: 4096, image sequence number: 1751317449
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 51C7124B-A562-4AA0-948B-184BE8DB9030, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab013
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-07-05 12:44:10 driver-btm-api.c:542:init_freq_mode: This is scan-user version
2020-07-05 12:44:10 driver-btm-api.c:1877:bitmain_soc_init: opt_multi_version = 1
2020-07-05 12:44:10 driver-btm-api.c:1878:bitmain_soc_init: opt_bitmain_ab = 1
2020-07-05 12:44:10 driver-btm-api.c:1879:bitmain_soc_init: opt_bitmain_work_mode = 2
2020-07-05 12:44:10 driver-btm-api.c:1880:bitmain_soc_init: Miner compile time: Mon Apr 27 13:25:08 CST 2020 type: Antminer S17
2020-07-05 12:44:10 driver-btm-api.c:1881:bitmain_soc_init: commit version: d22f356 2020-04-24 18:30:49, build by: lol 2020-04-27 13:31:45
2020-07-05 12:44:10 driver-btm-api.c:1691:show_sn: no SN got, please write SN to /nvdata/sn
2020-07-05 12:44:10 driver-btm-api.c:1040:miner_device_init: Detect 256MB control board of XILINX
2020-07-05 12:44:10 driver-btm-api.c:988:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2020-07-05 12:44:10 thread.c:783:create_read_nonce_reg_thread: create thread
2020-07-05 12:44:16 driver-btm-api.c:972:init_miner_version: miner ID : 8154a42e5740885c
2020-07-05 12:44:16 driver-btm-api.c:978:init_miner_version: FPGA Version = 0xB013
2020-07-05 12:44:22 driver-btm-api.c:616:get_product_id: product_id[0] = 0
2020-07-05 12:44:22 driver-btm-api.c:616:get_product_id: product_id[1] = 0
2020-07-05 12:44:22 driver-btm-api.c:616:get_product_id: product_id[2] = 0
2020-07-05 12:44:22 driver-btm-api.c:560:_set_project_type: project:1
2020-07-05 12:44:22 driver-btm-api.c:585:_set_project_type: Project type: Antminer S17
2020-07-05 12:44:22 driver-btm-api.c:596:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101
2020-07-05 12:44:22 driver-btm-api.c:597:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103
2020-07-05 12:44:22 driver-btm-api.c:596:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101
2020-07-05 12:44:22 driver-btm-api.c:597:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103
2020-07-05 12:44:22 driver-btm-api.c:596:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101
2020-07-05 12:44:22 driver-btm-api.c:597:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103
2020-07-05 12:44:23 driver-btm-api.c:1802:bitmain_board_init: Fan check passed.
2020-07-05 12:44:24 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-07-05 12:44:26 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2020-07-05 12:44:27 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-07-05 12:44:29 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2020-07-05 12:44:30 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-07-05 12:44:32 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2020-07-05 12:44:32 thread.c:778:create_pic_heart_beat_thread: create thread
2020-07-05 12:44:32 power_api.c:207:power_init: Power init:
2020-07-05 12:44:32 power_api.c:208:power_init: current_voltage_raw = 0
2020-07-05 12:44:32 power_api.c:209:power_init: highest_voltage_raw = 2100
2020-07-05 12:44:32 power_api.c:210:power_init: working_voltage_raw = 1830
2020-07-05 12:44:32 power_api.c:211:power_init: higher_voltage_raw = 1950
2020-07-05 12:44:32 driver-btm-api.c:1812:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-07-05 12:45:04 power_api.c:251:set_to_highest_voltage: Set to voltage raw 2100, one step.
2020-07-05 12:45:06 power_api.c:87:check_voltage_multi: retry time: 0
2020-07-05 12:45:07 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.246972
2020-07-05 12:45:08 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.136758
2020-07-05 12:45:10 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.240849
2020-07-05 12:45:10 power_api.c:50:_get_avg_voltage: average_voltage = 21.208193
2020-07-05 12:45:10 power_api.c:68:check_voltage: target_vol = 21.00, actural_vol = 21.21, check voltage passed.
2020-07-05 12:45:10 uart.c:71:set_baud: set fpga_baud to 115200
2020-07-05 12:45:21 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
2020-07-05 12:45:31 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
2020-07-05 12:45:42 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
2020-07-05 12:45:42 driver-btm-api.c:942:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
2020-07-05 12:45:54 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2020-07-05 12:46:05 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2020-07-05 12:46:16 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2020-07-05 12:46:16 driver-btm-api.c:942:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
2020-07-05 12:46:27 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2020-07-05 12:46:38 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2020-07-05 12:46:49 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2020-07-05 12:46:49 driver-btm-api.c:942:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2020-07-05 12:46:50 driver-btm-api.c:198:set_miner_status: ERROR_SOC_INIT
2020-07-05 12:46:50 driver-btm-api.c:139:stop_mining: stop mining: soc init failed!
2020-07-05 12:46:50 thread.c:828:cancel_read_nonce_reg_thread: cancel thread
2020-07-05 12:46:50 driver-btm-api.c:124:killall_hashboard: ****power off hashboard****

---

I wait for your help.

Thank you.

18 条评论

正式评论
Linda

2021年11月12日 02:48
Hello, for better communication you can contact us by support-cs@bitmain.com to provide newest kernel log.
评论操作固定链接
Luke HAO-Technical Specialist

2020年07月22日 09:35
Hello,Paulosssantos

Please check if the signal cables are well connected,replug them,if it can not be fixed after doing this,please send it back for repair,sorry about that.
0

评论操作固定链接

Jimi Rojas

2020年07月31日 21:40

Good afternoon, I have the same problem with
 an S17 the same does not connect, I already did the same steps and nothing works
but if I leave it off one day she connects and then stops mining please who can help me

Luke HAO-Technical Specialist

2020年08月03日 02:42
Hello Jimi Rojas

Please post the kernel log of the miner here，and I will help with remote diagnosis，thank you.
0

评论操作固定链接

Jimi Rojas

2020年08月09日 14:42

Good morning Friends, I tell you, I reset the configuration to factory values of the S17, I updated it to the latest version of the firmware and leave it off for two days, without connection to electricity, after that I programmed it and changed the name of the worker; I already have 3 days working well with the machine without any problem. I have rebooted several times and it reconnects to the Bitmain server;
Thank you very much for your help if I have problems I will contact you by this means
THANK YOU....

Jimi Rojas

2020年08月09日 14:52
I wanted to tell you that I am in Venezuela and the problem here is the Electricity that we suffer from blackouts every day and every time the S17 is turned off it was a problem for it to connect to the Bitmain server

new Thanks
0

评论操作固定链接
Jimi Rojas

2020年08月13日 21:34
Buenas tardes amigo te digo que he vuelto a tener problemas con el minero

he does not want to attach the miner kernel I hope you can help me

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203612K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25764K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12724K (cce94000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 28/12, WL threshold: 4096, image sequence number: 306349061
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 038216C1-D266-46DA-A76E-C04B142933A3, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 4113/798, WL threshold: 4096, image sequence number: 1751317449
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 51C7124B-A562-4AA0-948B-184BE8DB9030, small LPT model
alloc_contig_range: [e042, e043) PFNs busy
alloc_contig_range: [e042, e043) PFNs busy
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
alloc_contig_range: [e042, e043) PFNs busy
alloc_contig_range: [e042, e043) PFNs busy
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab013
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
Aug 13 21:06:16 (none) user.notice kernel: random: nonblocking pool is initialized
2020-08-13 20:31:05 driver-btm-api.c:542:init_freq_mode: This is scan-user version
2020-08-13 20:31:05 driver-btm-api.c:1877:bitmain_soc_init: opt_multi_version = 1
2020-08-13 20:31:05 driver-btm-api.c:1878:bitmain_soc_init: opt_bitmain_ab = 1
2020-08-13 20:31:05 driver-btm-api.c:1879:bitmain_soc_init: opt_bitmain_work_mode = 2
2020-08-13 20:31:05 driver-btm-api.c:1880:bitmain_soc_init: Miner compile time: Mon Apr 27 13:23:07 CST 2020 type: Antminer S17
2020-08-13 20:31:05 driver-btm-api.c:1881:bitmain_soc_init: commit version: d22f356 2020-04-24 18:30:49, build by: lol 2020-04-27 13:30:25
2020-08-13 20:31:05 driver-btm-api.c:1691:show_sn: no SN got, please write SN to /nvdata/sn
2020-08-13 20:31:05 driver-btm-api.c:1040:miner_device_init: Detect 256MB control board of XILINX
2020-08-13 20:31:05 driver-btm-api.c:988:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2020-08-13 20:31:05 thread.c:783:create_read_nonce_reg_thread: create thread
2020-08-13 20:31:11 driver-btm-api.c:972:init_miner_version: miner ID : 801c45842b104814
2020-08-13 20:31:11 driver-btm-api.c:978:init_miner_version: FPGA Version = 0xB013
2020-08-13 20:31:16 driver-btm-api.c:616:get_product_id: product_id[0] = 1
2020-08-13 20:31:16 driver-btm-api.c:616:get_product_id: product_id[1] = 1
2020-08-13 20:31:16 driver-btm-api.c:616:get_product_id: product_id[2] = 1
2020-08-13 20:31:16 driver-btm-api.c:560:_set_project_type: project:1
2020-08-13 20:31:16 driver-btm-api.c:585:_set_project_type: Project type: Antminer S17
2020-08-13 20:31:16 driver-btm-api.c:596:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101
2020-08-13 20:31:16 driver-btm-api.c:597:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103
2020-08-13 20:31:16 driver-btm-api.c:596:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101
2020-08-13 20:31:16 driver-btm-api.c:597:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103
2020-08-13 20:31:16 driver-btm-api.c:596:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101
2020-08-13 20:31:16 driver-btm-api.c:597:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103
2020-08-13 20:31:17 driver-btm-api.c:1802:bitmain_board_init: Fan check passed.
2020-08-13 20:31:18 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-08-13 20:31:20 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2020-08-13 20:31:22 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-08-13 20:31:24 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2020-08-13 20:31:25 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-08-13 20:31:27 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2020-08-13 20:31:27 thread.c:778:create_pic_heart_beat_thread: create thread
2020-08-13 20:31:27 power_api.c:207:power_init: Power init:
2020-08-13 20:31:27 power_api.c:208:power_init: current_voltage_raw = 0
2020-08-13 20:31:27 power_api.c:209:power_init: highest_voltage_raw = 2100
2020-08-13 20:31:27 power_api.c:210:power_init: working_voltage_raw = 1830
2020-08-13 20:31:27 power_api.c:211:power_init: higher_voltage_raw = 1950
2020-08-13 20:31:27 driver-btm-api.c:1812:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-08-13 20:31:59 power_api.c:251:set_to_highest_voltage: Set to voltage raw 2100, one step.
2020-08-13 20:32:01 power_api.c:87:check_voltage_multi: retry time: 0
2020-08-13 20:32:02 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.369433
2020-08-13 20:32:03 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.400049
2020-08-13 20:32:04 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.381679
2020-08-13 20:32:04 power_api.c:50:_get_avg_voltage: average_voltage = 21.383720
2020-08-13 20:32:04 power_api.c:68:check_voltage: target_vol = 21.00, actural_vol = 21.38, check voltage passed.
2020-08-13 20:32:04 uart.c:71:set_baud: set fpga_baud to 115200
2020-08-13 20:32:15 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 48 asic, times 0
2020-08-13 20:32:26 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 48 asic, times 0
2020-08-13 20:32:37 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 48 asic, times 0
2020-08-13 20:32:42 driver-btm-api.c:345:set_order_clock: chain[0]: set order clock, stragegy 3
2020-08-13 20:32:43 driver-btm-api.c:345:set_order_clock: chain[1]: set order clock, stragegy 3
2020-08-13 20:32:43 driver-btm-api.c:345:set_order_clock: chain[2]: set order clock, stragegy 3
2020-08-13 20:32:43 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0xb4
2020-08-13 20:32:43 uart.c:71:set_baud: set fpga_baud to 3000000
2020-08-13 20:32:43 driver-btm-api.c:1574:check_clock_counter: freq 50 clock_counter_limit 6
2020-08-13 20:32:45 uart.c:71:set_baud: set fpga_baud to 115200
2020-08-13 20:32:45 voltage[0] = 1860
2020-08-13 20:32:45 voltage[1] = 1860
2020-08-13 20:32:45 voltage[2] = 1860
2020-08-13 20:32:45 power_api.c:219:set_working_voltage_raw: working_voltage_raw = 1860
2020-08-13 20:32:45 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 0, sensor = 8, type = 0x0, retry.
2020-08-13 20:32:45 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 0, sensor = 8, type = 0x0, retry.
2020-08-13 20:32:46 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 0, sensor = 8, type = 0x0, retry.
2020-08-13 20:32:46 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 0, sensor = 8, type = 0x0, retry.
2020-08-13 20:32:46 driver-btm-api.c:198:set_miner_status: ERROR_TEMP_LOST
2020-08-13 20:32:46 driver-btm-api.c:139:stop_mining: stop mining: Can't get temperature sensor type!
2020-08-13 20:32:46 thread.c:828:cancel_read_nonce_reg_thread: cancel thread
2020-08-13 20:32:46 driver-btm-api.c:124:killall_hashboard: ****power off hashboard****
0

评论操作固定链接
j.h.vazquez.s

2020年10月25日 00:54
Hi everyone

I have the same problem with S17 + miners, I already did the above steps, even other tests

2 miners were taken, one with failure and the other without failure, the two miners were exchanged between them the controlboard, resulting in the following:

The control board of the miner that has a fault, was installed in a miner that does not present any fault, this miner with that controlboard connected without problem

The control board of the miner that did not have failures was installed in the miner that has failures, this miner with that controlboard continues to present the same failure, this even changing the controlboard

As a note: the previously crashed miner had the PSU changed, the controlboard connectors to the hashboards, and even the hashboards were changed from slots
0

评论操作固定链接
Alex

2020年11月21日 15:22
I just upload new firmware on my S17+ 70TH device,

but now i got same error.

also check all your offers .

below is my kernel log:

Booting Linux on physical CPU 0x0

Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018

CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine model: Xilinx Zynq

cma: Reserved 16 MiB at 0x0e000000

Memory policy: Data cache writealloc

On node 0 totalpages: 61440

free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000

Normal zone: 480 pages used for memmap

Normal zone: 0 pages reserved

Normal zone: 61440 pages, LIFO batch:15

percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152

pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096

pcpu-alloc: [0] 0 [0] 1

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960

Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk

PID hash table entries: 1024 (order: 0, 4096 bytes)

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)

Virtual kernel memory layout:

    vector : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap : 0xffc00000 - 0xfff00000   (3072 kB)

    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)

    lowmem : 0xc0000000 - 0xcf000000   ( 240 MB)

    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

    modules : 0xbf000000 - 0xbfe00000   ( 14 MB)

      .text : 0xc0008000 - 0xc090c424   (9234 kB)

      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)

      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)

       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)

Preemptible hierarchical RCU implementation.

              Build-time adjustment of leaf fanout to 32.

              RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.

RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2

NR_IRQS:16 nr_irqs:16 16

efuse mapped to cf800000

ps7-slcr mapped to cf802000

L2C: platform modifies aux control register: 0x72360000 -> 0x72760000

L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000

L2C-310 erratum 769419 enabled

L2C-310 enabling early BRESP for Cortex-A9

L2C-310 full line of zeros enabled for Cortex-A9

L2C-310 ID prefetch enabled, offset 1 lines

L2C-310 dynamic clock gating enabled, standby mode enabled

L2C-310 cache controller enabled, 8 ways, 512 kB

L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001

zynq_clock_init: clkc starts at cf802100

Zynq clock init

sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns

clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns

Switching to timer-based delay loop, resolution 3ns

clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns

ps7-ttc #0 at cf80a000, irq=18

Console: colour dummy device 80x30

Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

CPU: Testing write buffer coherency: ok

CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

Setting up static identity map for 0x100000 - 0x100058

CPU1: failed to boot: -1

Brought up 1 CPUs

SMP: Total of 1 processors activated (666.66 BogoMIPS).

CPU: All CPU(s) started in SVC mode.

devtmpfs: initialized

VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

pinctrl core: initialized pinctrl subsystem

NET: Registered protocol family 16

DMA: preallocated 256 KiB pool for atomic coherent allocations

cpuidle: using governor menu

hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.

hw-breakpoint: maximum watchpoint size is 4 bytes.

zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000

vgaarb: loaded

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

media: Linux media interface: v0.10

Linux video capture interface: v2.00

pps_core: LinuxPPS API ver. 1 registered

pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

PTP clock support registered

EDAC MC: Ver: 3.0.0

Advanced Linux Sound Architecture Driver Initialized.

clocksource: Switched to clocksource arm_global_timer

NET: Registered protocol family 2

TCP established hash table entries: 2048 (order: 1, 8192 bytes)

TCP bind hash table entries: 2048 (order: 2, 16384 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

UDP hash table entries: 256 (order: 1, 8192 bytes)

UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

NET: Registered protocol family 1

RPC: Registered named UNIX socket transport module.

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

PCI: CLS 0 bytes, default 64

Trying to unpack rootfs image as initramfs...

rootfs image is not initramfs (no cpio magic); looks like an initrd

Freeing initrd memory: 12904K (cce67000 - cdb01000)

hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available

futex hash table entries: 512 (order: 3, 32768 bytes)

workingset: timestamp_bits=28 max_order=16 bucket_order=0

jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.

io scheduler noop registered

io scheduler deadline registered

io scheduler cfq registered (default)

dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330

dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16

e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps

console [ttyPS0] enabled

xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000

[drm] Initialized drm 1.1.0 20060810

brd: module loaded

loop: module loaded

CAN device driver interface

gpiod_set_value: invalid GPIO

libphy: MACB_mii_bus: probed

macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)

Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)

e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k

e1000e: Copyright(c) 1999 - 2015 Intel Corporation.

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

ehci-pci: EHCI PCI platform driver

usbcore: registered new interface driver usb-storage

mousedev: PS/2 mouse device common for all mice

i2c /dev entries driver

Xilinx Zynq CpuIdle Driver started

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright(c) Pierre Ossman

sdhci-pltfm: SDHCI platform and OF driver helper

mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA

ledtrig-cpu: registered to indicate activity on CPUs

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda

nand: Micron MT29F2G08ABAGAWP

nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128

nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip

Bad block table found at page 131008, version 0x01

Bad block table found at page 130944, version 0x01

6 ofpart partitions found on MTD device pl35x-nand

Creating 6 MTD partitions on "pl35x-nand":

0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"

0x000002800000-0x000004800000 : "ramfs"

0x000004800000-0x000005000000 : "configs"

0x000005000000-0x000006000000 : "reserve"

0x000006000000-0x000008000000 : "ramfs-bak"

0x000008000000-0x000010000000 : "reserve1"

NET: Registered protocol family 10

sit: IPv6 over IPv4 tunneling driver

NET: Registered protocol family 17

can: controller area network core (rev 20120528 abi 9)

NET: Registered protocol family 29

can: raw protocol (rev 20120528)

can: broadcast manager protocol (rev 20120528 t)

can: netlink gateway (rev 20130117) max_hops=1

zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'

zynq_pm_late_init: Unable to map DDRC IO memory.

Registering SWP/SWPB emulation handler

hctosys: unable to open rtc device (rtc0)

ALSA device list:

No soundcards found.

RAMDISK: gzip image found at block 0

EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities

EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)

VFS: Mounted root (ext4 filesystem) on device 1:0.

devtmpfs: mounted

Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)

EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr

random: dd urandom read with 0 bits of entropy available

ubi0: attaching mtd2

ubi0: scanning is finished

ubi0: attached mtd2 (name "configs", size 8 MiB)

ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096

ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0

ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128

ubi0: max/mean erase counter: 20/8, WL threshold: 4096, image sequence number: 237714726

ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40

ubi0: background thread "ubi_bgt0d" started, PID 708

UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711

UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"

UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)

UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)

UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model

ubi1: attaching mtd5

ubi1: scanning is finished

ubi1: attached mtd5 (name "reserve1", size 128 MiB)

ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096

ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0

ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128

ubi1: max/mean erase counter: 1163/247, WL threshold: 4096, image sequence number: 3265111179

ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36

ubi1: background thread "ubi_bgt1d" started, PID 720

UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723

UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"

UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)

UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)

UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1AF6F1E1-61F0-462C-AE44-C7D9596CF7E2, small LPT model

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz

macb e000b000.ethernet eth0: link up (100/Full)

IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

In axi fpga driver!

request_mem_region OK!

AXI fpga dev virtual address is 0xcfb38000

*base_vir_addr = 0xb023

In fpga mem driver!

request_mem_region OK!

fpga mem virtual address is 0xd2000000

2020-11-21 15:01:42 driver-btm-api.c:779:init_freq_mode: This is scan-user version

2020-11-21 15:01:42 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version     = 1

2020-11-21 15:01:42 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab        = 1

2020-11-21 15:01:42 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0

2020-11-21 15:01:42 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun 2 10:31:07 CST 2020 type: Antminer S17+

2020-11-21 15:01:42 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21

2020-11-21 15:01:42 driver-btm-api.c:2083:show_sn: len:16, 8148c5064e104814

2020-11-21 15:01:42 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1

2020-11-21 15:01:42 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1

2020-11-21 15:01:42 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 8148c5064e104814

2020-11-21 15:01:42 fan.c:284:front_fan_power_on: Note: front fan is power on!

2020-11-21 15:01:42 fan.c:296:rear_fan_power_on: Note: rear fan is power on!

2020-11-21 15:01:42 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX

2020-11-21 15:01:42 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0 fan_pwm : 0

2020-11-21 15:01:48 driver-btm-api.c:1239:init_miner_version: miner ID : 8148c5064e104814

2020-11-21 15:01:48 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023

2020-11-21 15:01:54 driver-btm-api.c:837:get_product_id: product_id[0] = 0

2020-11-21 15:01:54 driver-btm-api.c:837:get_product_id: product_id[1] = 0

2020-11-21 15:01:54 driver-btm-api.c:837:get_product_id: product_id[2] = 0

2020-11-21 15:01:54 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled

2020-11-21 15:01:54 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.

2020-11-21 15:01:54 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0

2020-11-21 15:01:54 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0

2020-11-21 15:01:54 thread.c:1363:create_read_nonce_reg_thread: create thread

2020-11-21 15:02:00 driver-btm-api.c:1239:init_miner_version: miner ID : 8148c5064e104814

2020-11-21 15:02:00 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
0

评论操作固定链接
Leso305

2020年12月05日 11:58
Hello,

My miner stopped working.

Steps I've already taken but without success:

1- Download and reload the firmware -> done but didn't solve

2- Check your mining pool URLs and settings very carefully -> well configured

3- Confirm that your internet and network is stable -> good internet

4- Check the voltage on the front and rear fans -> all working

5- Reset the miner -> done but didn't solve

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12904K (cce67000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 13/4, WL threshold: 4096, image sequence number: 262741923
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 494/181, WL threshold: 4096, image sequence number: 3563076859
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-12-05 10:42:37 driver-btm-api.c:779:init_freq_mode: This is scan-user version
2020-12-05 10:42:37 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version = 1
2020-12-05 10:42:37 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab = 1
2020-12-05 10:42:37 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-12-05 10:42:37 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun 2 10:31:07 CST 2020 type: Antminer S17+
2020-12-05 10:42:37 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21
2020-12-05 10:42:37 driver-btm-api.c:2083:show_sn: len:16, 80624c442b10481c
2020-12-05 10:42:37 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1
2020-12-05 10:42:37 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1
2020-12-05 10:42:37 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 80624c442b10481c
2020-12-05 10:42:37 fan.c:284:front_fan_power_on: Note: front fan is power on!
2020-12-05 10:42:37 fan.c:296:rear_fan_power_on: Note: rear fan is power on!
2020-12-05 10:42:37 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX
2020-12-05 10:42:37 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2020-12-05 10:42:43 driver-btm-api.c:1239:init_miner_version: miner ID : 80624c442b10481c
2020-12-05 10:42:43 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2020-12-05 10:42:49 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2020-12-05 10:42:49 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2020-12-05 10:42:49 driver-btm-api.c:837:get_product_id: product_id[3] = 0
2020-12-05 10:42:49 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled
2020-12-05 10:42:49 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.
2020-12-05 10:42:49 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
2020-12-05 10:42:49 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
2020-12-05 10:42:49 thread.c:1363:create_read_nonce_reg_thread: create thread
2020-12-05 10:42:55 driver-btm-api.c:1239:init_miner_version: miner ID : 80624c442b10481c
2020-12-05 10:42:55 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2020-12-05 10:43:00 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2020-12-05 10:43:00 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2020-12-05 10:43:00 driver-btm-api.c:837:get_product_id: product_id[3] = 0
2020-12-05 10:43:00 driver-btm-api.c:792:_set_project_type: project:0
2020-12-05 10:43:00 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+
2020-12-05 10:43:00 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-12-05 10:43:00 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-12-05 10:43:00 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-12-05 10:43:00 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-12-05 10:43:00 driver-btm-api.c:824:dump_pcb_bom_version: Chain [3] PCB Version: 0x0100
2020-12-05 10:43:00 driver-btm-api.c:825:dump_pcb_bom_version: Chain [3] BOM Version: 0x0100
2020-12-05 10:43:00 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.
2020-12-05 10:43:01 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-12-05 10:43:03 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-12-05 10:43:04 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-12-05 10:43:07 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-12-05 10:43:08 board.c:36:jump_and_app_check_restore_pic: chain[3] PIC jump to app
2020-12-05 10:43:10 board.c:40:jump_and_app_check_restore_pic: Check chain[3] PIC fw version=0x88
2020-12-05 10:43:10 thread.c:1358:create_pic_heart_beat_thread: create thread
2020-12-05 10:43:10 power_api.c:213:power_init: Power init:
2020-12-05 10:43:10 power_api.c:214:power_init: current_voltage_raw = 0
2020-12-05 10:43:10 power_api.c:215:power_init: highest_voltage_raw = 2100
2020-12-05 10:43:10 power_api.c:216:power_init: working_voltage_raw = 1950
2020-12-05 10:43:10 power_api.c:217:power_init: higher_voltage_raw = 2040
2020-12-05 10:43:10 power_api.c:218:power_init: check_asic_voltage_raw = 2100
2020-12-05 10:43:10 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-12-05 10:43:42 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
2020-12-05 10:44:07 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-05 10:44:08 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.958015
2020-12-05 10:44:10 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.960510
2020-12-05 10:44:11 power_api.c:40:_get_avg_voltage: chain = 3, voltage = 21.006361
2020-12-05 10:44:11 power_api.c:53:_get_avg_voltage: average_voltage = 20.974962
2020-12-05 10:44:11 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.97, check voltage passed.
2020-12-05 10:44:11 uart.c:72:set_baud: set fpga_baud to 115200
2020-12-05 10:44:22 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2020-12-05 10:44:33 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 8 asic, times 0
2020-12-05 10:44:44 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 8 asic, times 1
2020-12-05 10:44:55 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 8 asic, times 2
2020-12-05 10:44:55 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-12-05 10:45:04 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 8 asic, times 3
2020-12-05 10:45:04 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
2020-12-05 10:45:04 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
2020-12-05 10:45:07 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-05 10:45:09 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.424397
2020-12-05 10:45:10 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.428026
2020-12-05 10:45:11 power_api.c:40:_get_avg_voltage: chain = 3, voltage = 20.498727
2020-12-05 10:45:11 power_api.c:53:_get_avg_voltage: average_voltage = 20.450383
2020-12-05 10:45:11 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.45, check voltage passed.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-12-05 10:45:20 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 8 asic, times 4
2020-12-05 10:45:20 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
2020-12-05 10:45:20 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
2020-12-05 10:45:24 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-05 10:45:25 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.917408
2020-12-05 10:45:27 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 19.943950
2020-12-05 10:45:28 power_api.c:40:_get_avg_voltage: chain = 3, voltage = 19.991094
2020-12-05 10:45:28 power_api.c:53:_get_avg_voltage: average_voltage = 19.950817
2020-12-05 10:45:28 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 19.95, check voltage passed.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-12-05 10:45:37 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 8 asic, times 5
2020-12-05 10:45:37 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
2020-12-05 10:45:37 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
2020-12-05 10:45:42 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-05 10:45:43 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.933842
2020-12-05 10:45:44 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.936306
2020-12-05 10:45:45 power_api.c:40:_get_avg_voltage: chain = 3, voltage = 21.006361
2020-12-05 10:45:45 power_api.c:53:_get_avg_voltage: average_voltage = 20.958836
2020-12-05 10:45:45 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.96, check voltage passed.
2020-12-05 10:45:45 driver-btm-api.c:1193:check_asic_number: Chain 1 only find 8 asic, will power off hash board 1
2020-12-05 10:45:47 driver-btm-api.c:1195:check_asic_number: Chain 1 voltage: an0 = 2.787097, an2 2.790323, an6 2.532258.
2020-12-05 10:45:58 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[3]: find 0 asic, times 0
2020-12-05 10:46:10 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[3]: find 0 asic, times 1
2020-12-05 10:46:21 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[3]: find 0 asic, times 2
2020-12-05 10:46:21 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
chain 3, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-12-05 10:46:29 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[3]: find 0 asic, times 3
2020-12-05 10:46:29 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
2020-12-05 10:46:29 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
2020-12-05 10:46:33 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-05 10:46:34 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.424397
2020-12-05 10:46:35 power_api.c:40:_get_avg_voltage: chain = 3, voltage = 20.472681
2020-12-05 10:46:35 power_api.c:53:_get_avg_voltage: average_voltage = 20.448539
2020-12-05 10:46:35 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.45, check voltage passed.
chain 3, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-12-05 10:46:44 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[3]: find 0 asic, times 4
2020-12-05 10:46:44 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
2020-12-05 10:46:44 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
2020-12-05 10:46:47 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-05 10:46:48 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.917408
2020-12-05 10:46:50 power_api.c:40:_get_avg_voltage: chain = 3, voltage = 19.965693
2020-12-05 10:46:50 power_api.c:53:_get_avg_voltage: average_voltage = 19.941551
2020-12-05 10:46:50 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 19.94, check voltage passed.
chain 3, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2020-12-05 10:46:58 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[3]: find 0 asic, times 5
2020-12-05 10:46:58 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
2020-12-05 10:46:58 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
2020-12-05 10:47:03 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-05 10:47:05 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.907243
2020-12-05 10:47:06 power_api.c:40:_get_avg_voltage: chain = 3, voltage = 20.979670
2020-12-05 10:47:06 power_api.c:53:_get_avg_voltage: average_voltage = 20.943457
2020-12-05 10:47:06 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.94, check voltage passed.
2020-12-05 10:47:06 driver-btm-api.c:1193:check_asic_number: Chain 3 only find 0 asic, will power off hash board 3
2020-12-05 10:47:07 driver-btm-api.c:1195:check_asic_number: Chain 3 voltage: an0 = 2.816129, an2 2.803226, an6 2.538710.
2020-12-05 10:47:11 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
2020-12-05 10:47:11 driver-btm-api.c:435:set_order_clock: chain[0]: set order clock, stragegy 3
2020-12-05 10:47:11 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2020-12-05 10:47:11 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6
2020-12-05 10:47:12 voltage[0] = 1940
2020-12-05 10:47:12 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1940
2020-12-05 10:47:13 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
2020-12-05 10:47:13 uart.c:72:set_baud: set fpga_baud to 12000000
2020-12-05 10:47:13 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 21
2020-12-05 10:47:13 thread.c:1378:create_check_miner_status_thread: create thread
2020-12-05 10:47:13 thread.c:1368:create_show_miner_status_thread: create thread
2020-12-05 10:47:13 thread.c:1348:create_temperature_monitor_thread: create thread
2020-12-05 10:47:13 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 21 dec_freq_index=0
2020-12-05 10:47:13 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
2020-12-05 10:47:13 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work.
2020-12-05 10:47:13 thread.c:1338:create_asic_status_monitor_thread: create thread
2020-12-05 10:47:13 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 535, is_higher_voltage = true
2020-12-05 10:49:38 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
2020-12-05 10:49:40 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-05 10:49:41 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.786532
2020-12-05 10:49:41 power_api.c:53:_get_avg_voltage: average_voltage = 20.786532
2020-12-05 10:49:41 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.79, check voltage passed.
2020-12-05 10:51:35 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 61, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oxxxx
2020-12-05 10:51:36 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 0 times.
2020-12-05 10:51:37 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 61, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oxxxx
2020-12-05 10:51:38 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 1 times.
2020-12-05 10:51:39 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 61, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oxxxx
2020-12-05 10:51:40 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 2 times.
2020-12-05 10:51:41 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 61, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oxxxx
2020-12-05 10:51:42 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 3 times.
2020-12-05 10:51:43 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 61, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oxxxx
2020-12-05 10:51:44 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 4 times.
2020-12-05 10:51:44 thread.c:1297:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 5 times, power off.
2020-12-05 10:51:45 driver-btm-api.c:222:set_miner_status: ERROR_ASIC_LOSS
2020-12-05 10:51:45 driver-btm-api.c:156:stop_mining: stop mining: all chains meet asic loss.
2020-12-05 10:51:45 thread.c:1419:cancel_check_miner_status_thread: cancel thread
2020-12-05 10:51:45 thread.c:1388:cancel_temperature_monitor_thread: cancel thread
2020-12-05 10:51:45 thread.c:1403:cancel_read_nonce_reg_thread: cancel thread
2020-12-05 10:51:45 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****
2020-12-05 10:52:23 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2080, step by step.
2020-12-05 10:52:24 power_api.c:85:check_voltage_multi: retry time: 0
2020-12-05 10:52:24 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:24 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:24 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:25 power_api.c:85:check_voltage_multi: retry time: 1
2020-12-05 10:52:25 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:25 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:25 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:26 power_api.c:85:check_voltage_multi: retry time: 2
2020-12-05 10:52:26 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:26 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:26 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:27 power_api.c:85:check_voltage_multi: retry time: 3
2020-12-05 10:52:27 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:27 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:27 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:28 power_api.c:85:check_voltage_multi: retry time: 4
2020-12-05 10:52:28 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:28 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:28 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:29 power_api.c:85:check_voltage_multi: retry time: 5
2020-12-05 10:52:29 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:29 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:29 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:30 power_api.c:85:check_voltage_multi: retry time: 6
2020-12-05 10:52:30 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:30 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:30 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:31 power_api.c:85:check_voltage_multi: retry time: 7
2020-12-05 10:52:31 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:31 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:31 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:32 power_api.c:85:check_voltage_multi: retry time: 8
2020-12-05 10:52:32 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:32 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:32 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:33 power_api.c:85:check_voltage_multi: retry time: 9
2020-12-05 10:52:33 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:33 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:33 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:34 power_api.c:85:check_voltage_multi: retry time: 10
2020-12-05 10:52:34 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:34 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:34 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:35 power_api.c:85:check_voltage_multi: retry time: 11
2020-12-05 10:52:35 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:35 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:35 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:36 power_api.c:85:check_voltage_multi: retry time: 12
2020-12-05 10:52:36 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:36 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:36 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:37 power_api.c:85:check_voltage_multi: retry time: 13
2020-12-05 10:52:37 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:37 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:37 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:38 power_api.c:85:check_voltage_multi: retry time: 14
2020-12-05 10:52:38 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:38 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:38 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:39 power_api.c:85:check_voltage_multi: retry time: 15
2020-12-05 10:52:39 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:39 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:39 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:40 power_api.c:85:check_voltage_multi: retry time: 16
2020-12-05 10:52:40 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:40 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:40 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:41 power_api.c:85:check_voltage_multi: retry time: 17
2020-12-05 10:52:41 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:41 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:41 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:42 power_api.c:85:check_voltage_multi: retry time: 18
2020-12-05 10:52:42 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:42 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:42 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:43 power_api.c:85:check_voltage_multi: retry time: 19
2020-12-05 10:52:43 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:43 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:43 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:44 power_api.c:85:check_voltage_multi: retry time: 20
2020-12-05 10:52:44 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:44 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:44 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:45 power_api.c:85:check_voltage_multi: retry time: 21
2020-12-05 10:52:45 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:45 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:45 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:46 power_api.c:85:check_voltage_multi: retry time: 22
2020-12-05 10:52:46 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:46 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:46 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:47 power_api.c:85:check_voltage_multi: retry time: 23
2020-12-05 10:52:47 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:47 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:47 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:48 power_api.c:85:check_voltage_multi: retry time: 24
2020-12-05 10:52:48 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:48 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:48 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:49 power_api.c:85:check_voltage_multi: retry time: 25
2020-12-05 10:52:49 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:49 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:49 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:50 power_api.c:85:check_voltage_multi: retry time: 26
2020-12-05 10:52:50 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:50 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:50 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:51 power_api.c:85:check_voltage_multi: retry time: 27
2020-12-05 10:52:51 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:51 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:51 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:52 power_api.c:85:check_voltage_multi: retry time: 28
2020-12-05 10:52:52 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:52 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:52 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:53 power_api.c:85:check_voltage_multi: retry time: 29
2020-12-05 10:52:53 power_api.c:46:_get_avg_voltage: No chain exist.
2020-12-05 10:52:53 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2020-12-05 10:52:53 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
2020-12-05 10:52:54 driver-btm-api.c:222:set_miner_status: ERROR_POWER_LOST
2020-12-05 10:52:54 driver-btm-api.c:156:stop_mining: stop mining: power set failed!
2020-12-05 10:52:54 thread.c:1343:cancel_asic_status_monitor_thread: cancel thread
2020-12-05 10:52:54 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****
0

评论操作固定链接
Luke HAO-Technical Specialist

2020年12月07日 06:15
Hello,Leso305

The failure information of this miner is missing chips,please change a known good PSU for it and run it again,if it can not be fixed after doing this,then it needs to be repaired.
0

评论操作固定链接
Leso305

2020年12月07日 20:39
The power supply terminals are 19.5V, these volts are on all boards.
Does it make sense to try reinstalling using an SD card?
Does it make sense to send the machine for repair?
0

评论操作固定链接
Luke HAO-Technical Specialist

2020年12月08日 02:22
Hi Leso305

If this is the case,I think it needs to be repaired.
0

评论操作固定链接
Geovaneedermaluff

2021年02月07日 14:13
máquinas da bitmain nunca mais, são bosta pura muito ruim, minero de péssima qualidade
0

评论操作固定链接

jensfrisk

2021年03月27日 21:10

Hi, ive got the same problem and have done the stepps to ensure that everything is correct.

Hardware Version

Socket connect failed: Connection refused

Kernel Version

Linux 4.6.0-xilinx-gff8137b-dirty #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12904K (cce67000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 17/7, WL threshold: 4096, image sequence number: 237714726
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 2585/677, WL threshold: 4096, image sequence number: 3265111179
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1AF6F1E1-61F0-462C-AE44-C7D9596CF7E2, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2021-03-27 21:03:52 driver-btm-api.c:779:init_freq_mode: This is scan-user version
2021-03-27 21:03:52 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version = 1
2021-03-27 21:03:52 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab = 1
2021-03-27 21:03:52 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0
2021-03-27 21:03:52 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun 2 10:31:07 CST 2020 type: Antminer S17+
2021-03-27 21:03:52 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21
2021-03-27 21:03:52 driver-btm-api.c:2083:show_sn: len:16, 80502dc42b104814
2021-03-27 21:03:52 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1
2021-03-27 21:03:52 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1
2021-03-27 21:03:52 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 80502dc42b104814
2021-03-27 21:03:52 fan.c:284:front_fan_power_on: Note: front fan is power on!
2021-03-27 21:03:52 fan.c:296:rear_fan_power_on: Note: rear fan is power on!
2021-03-27 21:03:52 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX
2021-03-27 21:03:52 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2021-03-27 21:03:58 driver-btm-api.c:1239:init_miner_version: miner ID : 80502dc42b104814
2021-03-27 21:03:58 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2021-03-27 21:04:03 driver-btm-api.c:837:get_product_id: product_id[0] = 1
2021-03-27 21:04:03 driver-btm-api.c:837:get_product_id: product_id[1] = 1
2021-03-27 21:04:03 driver-btm-api.c:837:get_product_id: product_id[2] = 1
2021-03-27 21:04:03 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled
2021-03-27 21:04:03 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.
2021-03-27 21:04:03 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
2021-03-27 21:04:03 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
2021-03-27 21:04:03 thread.c:1363:create_read_nonce_reg_thread: create thread
2021-03-27 21:04:09 driver-btm-api.c:1239:init_miner_version: miner ID : 80502dc42b104814
2021-03-27 21:04:09 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2021-03-27 21:04:14 driver-btm-api.c:837:get_product_id: product_id[0] = 1
2021-03-27 21:04:14 driver-btm-api.c:837:get_product_id: product_id[1] = 1
2021-03-27 21:04:14 driver-btm-api.c:837:get_product_id: product_id[2] = 1
2021-03-27 21:04:14 driver-btm-api.c:792:_set_project_type: project:0
2021-03-27 21:04:14 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+
2021-03-27 21:04:14 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2021-03-27 21:04:14 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2021-03-27 21:04:14 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2021-03-27 21:04:14 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2021-03-27 21:04:14 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2021-03-27 21:04:14 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2021-03-27 21:04:16 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.
2021-03-27 21:04:17 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-03-27 21:04:20 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2021-03-27 21:04:21 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-03-27 21:04:23 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2021-03-27 21:04:24 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-03-27 21:04:26 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2021-03-27 21:04:26 thread.c:1358:create_pic_heart_beat_thread: create thread
2021-03-27 21:04:26 power_api.c:213:power_init: Power init:
2021-03-27 21:04:26 power_api.c:214:power_init: current_voltage_raw = 0
2021-03-27 21:04:26 power_api.c:215:power_init: highest_voltage_raw = 2100
2021-03-27 21:04:26 power_api.c:216:power_init: working_voltage_raw = 1950
2021-03-27 21:04:26 power_api.c:217:power_init: higher_voltage_raw = 2040
2021-03-27 21:04:26 power_api.c:218:power_init: check_asic_voltage_raw = 2100
2021-03-27 21:04:26 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-03-27 21:04:26 power_api.c:186:power_off: init gpio907
2021-03-27 21:04:58 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
2021-03-27 21:05:24 power_api.c:85:check_voltage_multi: retry time: 0
2021-03-27 21:05:25 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.154141
2021-03-27 21:05:26 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.132653
2021-03-27 21:05:27 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.084183
2021-03-27 21:05:27 power_api.c:53:_get_avg_voltage: average_voltage = 21.123659
2021-03-27 21:05:27 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.12, check voltage passed.
2021-03-27 21:05:27 uart.c:72:set_baud: set fpga_baud to 115200
2021-03-27 21:05:38 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2021-03-27 21:05:49 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0
2021-03-27 21:06:00 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
2021-03-27 21:06:08 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
2021-03-27 21:06:08 driver-btm-api.c:435:set_order_clock: chain[0]: set order clock, stragegy 3
2021-03-27 21:06:09 driver-btm-api.c:435:set_order_clock: chain[1]: set order clock, stragegy 3
2021-03-27 21:06:09 driver-btm-api.c:435:set_order_clock: chain[2]: set order clock, stragegy 3
2021-03-27 21:06:09 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2021-03-27 21:06:09 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6
2021-03-27 21:06:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 56
2021-03-27 21:06:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 56
2021-03-27 21:06:10 voltage[0] = 1960
2021-03-27 21:06:10 voltage[1] = 1960
2021-03-27 21:06:10 voltage[2] = 1960
2021-03-27 21:06:10 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1960
2021-03-27 21:06:11 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
2021-03-27 21:06:12 temperature.c:340:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
2021-03-27 21:06:13 temperature.c:340:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
2021-03-27 21:06:13 uart.c:72:set_baud: set fpga_baud to 12000000
2021-03-27 21:06:15 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 9
2021-03-27 21:06:15 thread.c:1378:create_check_miner_status_thread: create thread
2021-03-27 21:06:15 thread.c:1368:create_show_miner_status_thread: create thread
2021-03-27 21:06:15 thread.c:1348:create_temperature_monitor_thread: create thread
2021-03-27 21:06:15 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 9 dec_freq_index=0
2021-03-27 21:06:15 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
2021-03-27 21:06:15 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work.
2021-03-27 21:06:15 thread.c:1338:create_asic_status_monitor_thread: create thread
2021-03-27 21:06:15 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 585, is_higher_voltage = true
2021-03-27 21:09:07 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
2021-03-27 21:09:09 power_api.c:85:check_voltage_multi: retry time: 0
2021-03-27 21:09:10 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.984714
2021-03-27 21:09:11 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.887899
2021-03-27 21:09:12 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.890306
2021-03-27 21:09:12 power_api.c:53:_get_avg_voltage: average_voltage = 20.920973
2021-03-27 21:09:12 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.92, check voltage passed.
2021-03-27 21:10:02 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2080, step by step.
2021-03-27 21:10:04 power_api.c:85:check_voltage_multi: retry time: 0
2021-03-27 21:10:05 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.861323
2021-03-27 21:10:06 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.742676
2021-03-27 21:10:07 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.793367
2021-03-27 21:10:07 power_api.c:53:_get_avg_voltage: average_voltage = 20.799122
2021-03-27 21:10:07 power_api.c:71:check_voltage: target_vol = 20.80, actural_vol = 20.80, check voltage passed.

Jose Gonzalez

2021年11月10日 03:46
Please Help, I got the the

Socket connect failed: Connection refused once I tried to do the upgrade. EMAIL is OSEGONZ@gmail.com

Thank you

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203608K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25768K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12728K (cce93000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 5/1, WL threshold: 4096, image sequence number: 1569884722
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 6D6F8DEA-EB8C-4B01-B4CF-89233E1F6A8A, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1105870949
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID D594A0DF-DE5A-4643-827F-3EC7468417CE, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab013
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
Nov 10 03:40:19 (none) user.notice kernel: random: nonblocking pool is initialized
2021-11-10 03:38:09 driver-btm-api.c:542:init_freq_mode: This is scan-user version
2021-11-10 03:38:09 driver-btm-api.c:1877:bitmain_soc_init: opt_multi_version = 1
2021-11-10 03:38:09 driver-btm-api.c:1878:bitmain_soc_init: opt_bitmain_ab = 1
2021-11-10 03:38:09 driver-btm-api.c:1879:bitmain_soc_init: opt_bitmain_work_mode = 1
2021-11-10 03:38:09 driver-btm-api.c:1880:bitmain_soc_init: Miner compile time: Mon Apr 27 13:25:08 CST 2020 type: Antminer S17
2021-11-10 03:38:09 driver-btm-api.c:1881:bitmain_soc_init: commit version: d22f356 2020-04-24 18:30:49, build by: lol 2020-04-27 13:31:45
2021-11-10 03:38:09 driver-btm-api.c:1691:show_sn: no SN got, please write SN to /nvdata/sn
2021-11-10 03:38:09 driver-btm-api.c:1040:miner_device_init: Detect 256MB control board of XILINX
2021-11-10 03:38:09 driver-btm-api.c:988:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2021-11-10 03:38:09 thread.c:783:create_read_nonce_reg_thread: create thread
2021-11-10 03:38:15 driver-btm-api.c:972:init_miner_version: miner ID : 8078542a7910481c
2021-11-10 03:38:15 driver-btm-api.c:978:init_miner_version: FPGA Version = 0xB013
2021-11-10 03:38:20 driver-btm-api.c:616:get_product_id: product_id[0] = 0
2021-11-10 03:38:20 driver-btm-api.c:616:get_product_id: product_id[1] = 0
2021-11-10 03:38:20 driver-btm-api.c:616:get_product_id: product_id[2] = 0
2021-11-10 03:38:20 driver-btm-api.c:560:_set_project_type: project:0
2021-11-10 03:38:20 driver-btm-api.c:585:_set_project_type: Project type: Antminer S17 Pro
2021-11-10 03:38:20 driver-btm-api.c:596:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101
2021-11-10 03:38:20 driver-btm-api.c:597:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103
2021-11-10 03:38:20 driver-btm-api.c:596:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101
2021-11-10 03:38:20 driver-btm-api.c:597:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103
2021-11-10 03:38:20 driver-btm-api.c:596:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101
2021-11-10 03:38:20 driver-btm-api.c:597:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103
2021-11-10 03:38:23 driver-btm-api.c:1802:bitmain_board_init: Fan check passed.
2021-11-10 03:38:24 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-11-10 03:38:26 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-11-10 03:38:28 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-11-10 03:38:30 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-11-10 03:38:31 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-11-10 03:38:33 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2021-11-10 03:38:33 thread.c:778:create_pic_heart_beat_thread: create thread
2021-11-10 03:38:33 power_api.c:207:power_init: Power init:
2021-11-10 03:38:33 power_api.c:208:power_init: current_voltage_raw = 0
2021-11-10 03:38:33 power_api.c:209:power_init: highest_voltage_raw = 2100
2021-11-10 03:38:33 power_api.c:210:power_init: working_voltage_raw = 1830
2021-11-10 03:38:33 power_api.c:211:power_init: higher_voltage_raw = 1950
2021-11-10 03:38:33 driver-btm-api.c:1812:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-11-10 03:38:33 power_api.c:181:power_off: init gpio907
2021-11-10 03:39:05 power_api.c:251:set_to_highest_voltage: Set to voltage raw 2100, one step.
2021-11-10 03:39:07 power_api.c:87:check_voltage_multi: retry time: 0
2021-11-10 03:39:08 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.038789
2021-11-10 03:39:09 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.142881
2021-11-10 03:39:10 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.014297
2021-11-10 03:39:10 power_api.c:50:_get_avg_voltage: average_voltage = 21.065322
2021-11-10 03:39:10 power_api.c:68:check_voltage: target_vol = 21.00, actural_vol = 21.07, check voltage passed.
2021-11-10 03:39:10 uart.c:71:set_baud: set fpga_baud to 115200
2021-11-10 03:39:21 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 16 asic, times 0
2021-11-10 03:39:32 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 16 asic, times 1
2021-11-10 03:39:43 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 16 asic, times 2
2021-11-10 03:39:43 driver-btm-api.c:942:check_asic_number: Chain 0 only find 16 asic, will power off hash board 0
2021-11-10 03:39:55 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 40 asic, times 0
2021-11-10 03:40:06 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 40 asic, times 1
2021-11-10 03:40:17 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 40 asic, times 2
2021-11-10 03:40:17 driver-btm-api.c:942:check_asic_number: Chain 1 only find 40 asic, will power off hash board 1
2021-11-10 03:40:29 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2021-11-10 03:40:40 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2021-11-10 03:40:50 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2021-11-10 03:40:50 driver-btm-api.c:942:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2021-11-10 03:40:51 driver-btm-api.c:198:set_miner_status: ERROR_SOC_INIT
2021-11-10 03:40:51 driver-btm-api.c:139:stop_mining: stop mining: soc init failed!
2021-11-10 03:40:51 thread.c:828:cancel_read_nonce_reg_thread: cancel thread
2021-11-10 03:40:51 driver-btm-api.c:124:killall_hashboard: ****power off hashboard****
0

评论操作固定链接
dickydck

2022年01月24日 21:18
Seems this is a common thing, where to start a repair order here in USA?
0

评论操作固定链接
Linda

2022年01月25日 03:10
Hello, please refer to the refer guide

https://service.bitmain.com/support/guide

https://support.bitmain.com/hc/en-us/articles/220138027
0

评论操作固定链接

请先登录再写评论。

评论

没有找到您要找的？