S17+

已回答

关注

Mohammadrahimpour1372

• 2020年04月14日 08:42

Dear bitmain support team, hi I have 3 s17+ and all of the sudden all of them have lost one of their chains and due to this issue, they are working with 48th ( they suppose to work with 73th) and after sometime they give me 0 th can you help me solve this issue? Unfortunately i cant send them to you due to coronavirus lockdown. Pleas tell me how can i fix them myself Regards This is my kernel log Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203528K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25848K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12808K (cce7e000 - cdb00000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) ©️ 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 26/12, WL threshold: 4096, image sequence number: 237714726 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 123/33, WL threshold: 4096, image sequence number: 3265111179 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1AF6F1E1-61F0-462C-AE44-C7D9596CF7E2, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xb023 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized 2020-04-14 08:31:55 driver-btm-api.c:650:init_freq_mode: This is scan-user version 2020-04-14 08:31:55 driver-btm-api.c:1833:bitmain_soc_init: opt_multi_version = 1 2020-04-14 08:31:55 driver-btm-api.c:1834:bitmain_soc_init: opt_bitmain_ab = 1 2020-04-14 08:31:55 driver-btm-api.c:1835:bitmain_soc_init: opt_bitmain_work_mode = 0 2020-04-14 08:31:55 driver-btm-api.c:1836:bitmain_soc_init: Miner compile time: Mon Dec 16 12:57:06 CST 2019 type: Antminer S17+ 2020-04-14 08:31:55 driver-btm-api.c:1837:bitmain_soc_init: commit version: cb79652 2019-12-16 10:49:27, build by: lol 2019-12-16 13:09:06 2020-04-14 08:31:55 driver-btm-api.c:1673:show_sn: no SN got, please write SN to /nvdata/sn 2020-04-14 08:31:55 fan.c:256:front_fan_power_on: Note: front fan is power on! 2020-04-14 08:31:55 fan.c:268:rear_fan_power_on: Note: rear fan is power on! 2020-04-14 08:31:55 driver-btm-api.c:1128:miner_device_init: Detect 256MB control board of XILINX 2020-04-14 08:31:55 driver-btm-api.c:1076:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2020-04-14 08:31:55 thread.c:783:create_read_nonce_reg_thread: create thread 2020-04-14 08:32:01 driver-btm-api.c:1060:init_miner_version: miner ID : 8058a4242b10481c 2020-04-14 08:32:01 driver-btm-api.c:1066:init_miner_version: FPGA Version = 0xB023 2020-04-14 08:32:07 driver-btm-api.c:707:get_product_id: product_id[0] = 0 2020-04-14 08:32:07 driver-btm-api.c:707:get_product_id: product_id[1] = 0 2020-04-14 08:32:07 driver-btm-api.c:707:get_product_id: product_id[2] = 0 2020-04-14 08:32:07 driver-btm-api.c:663:_set_project_type: project:0 2020-04-14 08:32:07 driver-btm-api.c:683:_set_project_type: Project type: Antminer S17+ 2020-04-14 08:32:07 driver-btm-api.c:694:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100 2020-04-14 08:32:07 driver-btm-api.c:695:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2020-04-14 08:32:07 driver-btm-api.c:694:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2020-04-14 08:32:07 driver-btm-api.c:695:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2020-04-14 08:32:07 driver-btm-api.c:694:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2020-04-14 08:32:07 driver-btm-api.c:695:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2020-04-14 08:32:11 driver-btm-api.c:1782:bitmain_board_init: Fan check passed. 2020-04-14 08:32:12 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-04-14 08:32:14 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2020-04-14 08:32:15 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-04-14 08:32:17 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2020-04-14 08:32:18 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-04-14 08:32:20 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2020-04-14 08:32:20 thread.c:778:create_pic_heart_beat_thread: create thread 2020-04-14 08:32:20 power_api.c:208:power_init: Power init: 2020-04-14 08:32:20 power_api.c:209:power_init: current_voltage_raw = 0 2020-04-14 08:32:20 power_api.c:210:power_init: highest_voltage_raw = 2100 2020-04-14 08:32:20 power_api.c:211:power_init: working_voltage_raw = 1950 2020-04-14 08:32:20 power_api.c:212:power_init: higher_voltage_raw = 2040 2020-04-14 08:32:20 driver-btm-api.c:1792:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2020-04-14 08:32:20 power_api.c:182:power_off: init gpio907 2020-04-14 08:32:52 power_api.c:262:set_to_highest_voltage: Set to voltage raw 2100, one step. 2020-04-14 08:32:54 power_api.c:83:check_voltage_multi: retry time: 0 2020-04-14 08:32:55 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 21.067861 2020-04-14 08:32:56 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 21.175572 2020-04-14 08:32:57 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 21.116516 2020-04-14 08:32:57 power_api.c:51:_get_avg_voltage: average_voltage = 21.119983 2020-04-14 08:32:57 power_api.c:69:check_voltage: target_vol = 21.00, actural_vol = 21.12, check voltage passed. 2020-04-14 08:32:57 uart.c:71:set_baud: set fpga_baud to 115200 2020-04-14 08:32:57 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26 2020-04-14 08:32:57 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26 2020-04-14 08:32:57 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26 2020-04-14 08:33:09 driver-btm-api.c:1000:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0 2020-04-14 08:33:20 driver-btm-api.c:1000:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0 2020-04-14 08:33:30 driver-btm-api.c:1000:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0 2020-04-14 08:33:41 driver-btm-api.c:1000:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1 2020-04-14 08:33:52 driver-btm-api.c:1000:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2 2020-04-14 08:33:52 driver-btm-api.c:1028:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2 2020-04-14 08:33:53 driver-btm-api.c:1030:check_asic_number: Chain 2 voltage: an0 = 2.793548, an2 2.793548, an6 2.522581. 2020-04-14 08:33:59 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003 2020-04-14 08:33:59 register.c:290:get_register: !!! REG_TYPE = 1. 2063597569 2020-04-14 08:33:59 register.c:290:get_register: !!! REG_TYPE = 1. 1073773313 2020-04-14 08:33:59 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3 2020-04-14 08:33:59 driver-btm-api.c:352:set_order_clock: chain[1]: set order clock, stragegy 3 2020-04-14 08:34:00 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34 2020-04-14 08:34:00 voltage[0] = 1960 2020-04-14 08:34:00 voltage[1] = 1960 2020-04-14 08:34:00 power_api.c:220:set_working_voltage_raw: working_voltage_raw = 1960 2020-04-14 08:34:01 temperature.c:315:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218 2020-04-14 08:34:02 temperature.c:315:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218 2020-04-14 08:34:02 uart.c:71:set_baud: set fpga_baud to 12000000 2020-04-14 08:34:02 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 12000000, chip_divider = 3 2020-04-14 08:34:02 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[1]: chip baud = 12000000, chip_divider = 3 2020-04-14 08:34:03 driver-btm-api.c:241:check_bringup_temp: Bring up temperature is 24 2020-04-14 08:34:03 thread.c:798:create_check_miner_status_thread: create thread 2020-04-14 08:34:03 thread.c:788:create_show_miner_status_thread: create thread 2020-04-14 08:34:03 thread.c:768:create_temperature_monitor_thread: create thread 2020-04-14 08:34:03 freq_tuning.c:149:freq_tuning_get_max_freq: Max freq of tuning is 650 2020-04-14 08:34:03 frequency.c:770:inc_freq_with_fixed_vco: chain = 255, freq = 510, is_higher_voltage = true 2020-04-14 08:34:12 frequency.c:811:inc_freq_with_fixed_step: chain = 0, freq_start = 510, freq_end = 520, freq_step = 5, is_higher_voltage = true 2020-04-14 08:34:13 power_api.c:346:set_to_voltage_by_steps: Set to voltage raw 2090, step by step. 2020-04-14 08:34:15 power_api.c:83:check_voltage_multi: retry time: 0 2020-04-14 08:34:16 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.870844 2020-04-14 08:34:17 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 20.928933 2020-04-14 08:34:17 power_api.c:51:_get_avg_voltage: average_voltage = 20.899888 2020-04-14 08:34:17 power_api.c:69:check_voltage: target_vol = 20.90, actural_vol = 20.90, check voltage passed. 2020-04-14 08:34:17 frequency.c:840:inc_asic_diff_freq_by_steps: chain = 0, start = 520, freq_step = 5 2020-04-14 08:34:24 frequency.c:840:inc_asic_diff_freq_by_steps: chain = 1, start = 510, freq_step = 5 2020-04-14 08:34:31 driver-btm-api.c:636:set_timeout: freq = 570, percent = 90, hcn = 44236, timeout = 77 2020-04-14 08:34:31 power_api.c:304:set_to_working_voltage_by_steps: Set to voltage raw 1960, step by step. 2020-04-14 08:34:36 power_api.c:83:check_voltage_multi: retry time: 0 2020-04-14 08:34:37 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 19.583120 2020-04-14 08:34:38 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 19.651843 2020-04-14 08:34:38 power_api.c:51:_get_avg_voltage: average_voltage = 19.617481 2020-04-14 08:34:38 power_api.c:69:check_voltage: target_vol = 19.60, actural_vol = 19.62, check voltage passed. 2020-04-14 08:34:38 thread.c:793:create_check_system_status_thread: create thread 2020-04-14 08:34:38 driver-btm-api.c:1937:bitmain_soc_init: Init done! 2020-04-14 08:34:38 driver-btm-api.c:194:set_miner_status: STATUS_INIT 2020-04-14 08:34:43 driver-btm-api.c:194:set_miner_status: STATUS_OKAY 2020-04-14 08:34:44 frequency.c:129:get_ideal_hash_rate_GH: ideal_hash_rate = 46505 2020-04-14 08:34:44 frequency.c:145:get_sale_hash_rate_GH: sale_hash_rate = 46000 2020-04-14 08:34:47 driver-btm-api.c:1310:dhash_chip_send_job: Version num 1 2020-04-14 08:35:07 driver-btm-api.c:1310:dhash_chip_send_job: Version num 4 2020-04-14 08:35:47 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 2020-04-14 08:35:47 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28 2020-04-14 08:35:47 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28 2020-04-14 08:35:47 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1 2020-04-14 08:35:47 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28 2020-04-14 08:35:47 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1 2020-04-14 08:35:47 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28 2020-04-14 08:35:47 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28 2020-04-14 08:35:48 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28 2020-04-14 08:35:48 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1 2020-04-14 08:35:48 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1 2020-04-14 08:35:49 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1 2020-04-14 08:35:49 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28 2020-04-14 08:35:49 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28 2020-04-14 08:35:49 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1 2020-04-14 08:35:49 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28 2020-04-14 08:35:50 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28 2020-04-14 08:35:50 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1 2020-04-14 08:35:50 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1 2020-04-14 08:35:50 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1 2020-04-14 08:35:50 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1 2020-04-14 08:35:51 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1 2020-04-14 08:35:52 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1 2020-04-14 08:35:52 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 50, reg = 28, got chain = 0, chip = 54, reg = 28 2020-04-14 08:35:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 2020-04-14 08:35:52 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28 2020-04-14 08:35:52 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1 2020-04-14 08:35:52 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1 2020-04-14 08:35:52 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1 2020-04-14 08:35:53 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1 2020-04-14 08:35:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 2020-04-14 08:35:54 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1 2020-04-14 08:35:54 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28 2020-04-14 08:35:54 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 10, reg = 28, got chain = 0, chip = 14, reg = 28 2020-04-14 08:35:54 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1 2020-04-14 08:35:54 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 0, chip = 54, reg = 28, got chain = 0, chip = 10, reg = 28 2020-04-14 08:35:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 2020-04-14 08:35:54 temperature.c:739:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1 2020-04-14 08:35:54 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 14, reg = 28, got chain = 0, chip = 50, reg = 28 2020-04-14 08:35:54 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1 2020-04-14 08:35:54 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 10, reg = 28, got chain = 1, chip = 14, reg = 28 2020-04-14 08:35:55 temperature.c:739:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1 2020-04-14 08:35:55 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 54, reg = 28, got chain = 1, chip = 10, reg = 28 2020-04-14 08:35:55 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 50, reg = 28, got chain = 1, chip = 54, reg = 28 2020-04-14 08:35:55 thread.c:577:check_temperature: over max temp, pcb temp 50 (max 83), chip temp 61(max 103) pcb temp rise 0 (max 20) chip temp rise 188 (max 30) 2020-04-14 08:35:55 driver-btm-api.c:194:set_miner_status: ERROR_TEMP_TOO_HIGH 2020-04-14 08:35:55 driver-btm-api.c:135:stop_mining: stop mining: over max temp 2020-04-14 08:35:55 thread.c:818:cancel_temperature_monitor_thread: cancel thread 2020-04-14 08:35:55 thread.c:844:cancel_check_system_status_thread: cancel thread 2020-04-14 08:35:55 thread.c:833:cancel_read_nonce_reg_thread: cancel thread 2020-04-14 08:35:55 driver-btm-api.c:120:killall_hashboard: ****power off hashboard****

1

• 正式评论

  

  Nick

  • 2021年06月24日 03:43

  Dears

  For your question ,please separately submit a new email ticket to us separately , we can reply you one by one

  For the S17 series SD card file you can download it in the below 

  Please download the SD card file in the below link

  https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image

  
  instructions:
  https://support.bitmain.com/hc/en-us/articles/360033757513-S17-S17Pro-S9-SE-S9k-Z11-control-board-program-recovery-SD-card-flashing-with-customized-PW-

  评论操作 固定链接
• 

  Luke HAO-Technical Specialist

  • 2020年04月14日 09:45

  Hi,Sir

  The failure information of this kernel log are missing hashboard and read temp sensor failed,please leave me an Email and I will send you some firmware to try to fix it, thank you.

  1

  评论操作 固定链接
• 

  Rafael Dao

  • 2020年04月14日 23:43

  Hello, I am having the same problem with a S17e, can you send me the firmware?

  Thanks in advance.

  My email address: rafanet@gmail.com.

   

  0

  评论操作 固定链接
• 

  Luke HAO-Technical Specialist

  • 2020年04月15日 07:05

  Hi,Rafeal

       Sent!

  4

  评论操作 固定链接
• 

  Mohammadrahimpour1372

  • 2020年04月15日 08:37
  • 已编辑于

  Hi luke HAO, thnak you for your time my email is

  mohammadrahimpour1372@gmail.com

  I need to say that i have received a frimware from bitmain which is not working ( i used sd cart to change the frimware) and now i can’t even set my pool on it it doesn’t save address and othe r stuff

  Thanks again

  0

  评论操作 固定链接
• 

  Luke HAO-Technical Specialist

  • 2020年04月15日 10:21

  Hi，Mohammadrahimpour1372

  Sent！

  0

  评论操作 固定链接
• 

  iLotie

  • 2020年04月15日 13:27

  Hi,

  I have the same problem, can you help me please?

   

  My Email is guitteaudloick@gmail.com

  0

  评论操作 固定链接
• 

  Rafael Dao

  • 2020年04月15日 21:02

  Thanks Luke HAO, the firmware you sent me worked perfectly!.

  Can you send the SD Firmware and upgrade for the S17+ and S17 Pro ?

  Thanks again! keep on with the good work!

  0

  评论操作 固定链接
• 

  Euroasianmining

  • 2020年04月16日 06:48

  Hello. I have a similar problem with my s17 +, can you help me please?

   

  My Email is euuroasianmining@gmail.com

  0

  评论操作 固定链接
• 

  Inmer Vargas

  • 2020年04月17日 02:33

  Hi, i have the same problem with my Antminer s17+ 70th.

  can you  send me the firmware?

   

  rockybalboarocky@gmail.com

  0

  评论操作 固定链接
• 

  Ahmad Tajadod

  • 2020年04月19日 08:52

  Hi,same problem with Antminer s17+ 67th.

  can you  send me the firmware?

  ahmad.tajadod@gmail.com

  0

  评论操作 固定链接
• 

  Mohammadrahimpour1372

  • 2020年04月20日 08:05

  So i did as you said and the upgrade of control board and framware didn’t work and i still had the problem then i decided to check my hardware and i replaced the missing chian with one of hashboards of another s17+ and then again i had this error “find 0 asic” what do you suggest?

  0

  评论操作 固定链接
• 

  iLotie

  • 2020年04月20日 15:14

  Hi @Mohammadrahimpour1372
   
  How did you manage to get the firmware for the S17+ ?

  
  I have one that works and I want to put its firmware on the one that does not work.

  0

  评论操作 固定链接
• 

  Mohammadrahimpour1372

  • 2020年04月20日 16:00

  @iLotie

   

  just email bitmain suport team

  0

  评论操作 固定链接
• 

  Luke HAO-Technical Specialist

  • 2020年04月21日 02:24

  Hello guys

  We just released new firmware for S17+,please use it to upgrade the defective miners only,if you have any questions that are different from this post, please post a new one , thank you very much.

  0

  评论操作 固定链接
• 

  iLotie

  • 2020年04月24日 19:30

  Hi Luke HAO-Technical Specialist, 

  I try the new firmware, he not work with my S17+.

   

  Its my Kernel log

  Booting Linux on physical CPU 0x0
  Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
  CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
  CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  Machine model: Xilinx Zynq
  cma: Reserved 16 MiB at 0x0e000000
  Memory policy: Data cache writealloc
  On node 0 totalpages: 61440
  free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
  percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
  pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
  pcpu-alloc: [0] 0 [0] 1
  Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
  Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
  PID hash table entries: 1024 (order: 0, 4096 bytes)
  Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  Memory: 203444K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25932K reserved, 16384K cma-reserved, 0K highmem)
  Virtual kernel memory layout:
  vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
  lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
  pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  .text : 0xc0008000 - 0xc090c424 (9234 kB)
  .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
  .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
  .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
  Preemptible hierarchical RCU implementation.
  Build-time adjustment of leaf fanout to 32.
  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
  NR_IRQS:16 nr_irqs:16 16
  efuse mapped to cf800000
  ps7-slcr mapped to cf802000
  L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
  L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
  L2C-310 erratum 769419 enabled
  L2C-310 enabling early BRESP for Cortex-A9
  L2C-310 full line of zeros enabled for Cortex-A9
  L2C-310 ID prefetch enabled, offset 1 lines
  L2C-310 dynamic clock gating enabled, standby mode enabled
  L2C-310 cache controller enabled, 8 ways, 512 kB
  L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
  zynq_clock_init: clkc starts at cf802100
  Zynq clock init
  sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
  clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
  Switching to timer-based delay loop, resolution 3ns
  clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
  ps7-ttc #0 at cf80a000, irq=18
  Console: colour dummy device 80x30
  Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
  pid_max: default: 32768 minimum: 301
  Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  CPU: Testing write buffer coherency: ok
  CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  Setting up static identity map for 0x100000 - 0x100058
  CPU1: failed to boot: -1
  Brought up 1 CPUs
  SMP: Total of 1 processors activated (666.66 BogoMIPS).
  CPU: All CPU(s) started in SVC mode.
  devtmpfs: initialized
  VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  pinctrl core: initialized pinctrl subsystem
  NET: Registered protocol family 16
  DMA: preallocated 256 KiB pool for atomic coherent allocations
  cpuidle: using governor menu
  hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  hw-breakpoint: maximum watchpoint size is 4 bytes.
  zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
  vgaarb: loaded
  SCSI subsystem initialized
  usbcore: registered new interface driver usbfs
  usbcore: registered new interface driver hub
  usbcore: registered new device driver usb
  media: Linux media interface: v0.10
  Linux video capture interface: v2.00
  pps_core: LinuxPPS API ver. 1 registered
  pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  PTP clock support registered
  EDAC MC: Ver: 3.0.0
  Advanced Linux Sound Architecture Driver Initialized.
  clocksource: Switched to clocksource arm_global_timer
  NET: Registered protocol family 2
  TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  TCP: Hash tables configured (established 2048 bind 2048)
  UDP hash table entries: 256 (order: 1, 8192 bytes)
  UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  NET: Registered protocol family 1
  RPC: Registered named UNIX socket transport module.
  RPC: Registered udp transport module.
  RPC: Registered tcp transport module.
  RPC: Registered tcp NFSv4.1 backchannel transport module.
  PCI: CLS 0 bytes, default 64
  Trying to unpack rootfs image as initramfs...
  rootfs image is not initramfs (no cpio magic); looks like an initrd
  Freeing initrd memory: 12892K (cce6a000 - cdb01000)
  hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  futex hash table entries: 512 (order: 3, 32768 bytes)
  workingset: timestamp_bits=28 max_order=16 bucket_order=0
  jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  io scheduler noop registered
  io scheduler deadline registered
  io scheduler cfq registered (default)
  dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
  dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
  e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
  console [ttyPS0] enabled
  xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
  [drm] Initialized drm 1.1.0 20060810
  brd: module loaded
  loop: module loaded
  CAN device driver interface
  gpiod_set_value: invalid GPIO
  libphy: MACB_mii_bus: probed
  macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
  Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
  e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  ehci-pci: EHCI PCI platform driver
  usbcore: registered new interface driver usb-storage
  mousedev: PS/2 mouse device common for all mice
  i2c /dev entries driver
  Xilinx Zynq CpuIdle Driver started
  sdhci: Secure Digital Host Controller Interface driver
  sdhci: Copyright(c) Pierre Ossman
  sdhci-pltfm: SDHCI platform and OF driver helper
  mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
  ledtrig-cpu: registered to indicate activity on CPUs
  usbcore: registered new interface driver usbhid
  usbhid: USB HID core driver
  nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
  nand: Micron MT29F2G08ABAEAWP
  nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
  Bad block table found at page 131008, version 0x01
  Bad block table found at page 130944, version 0x01
  6 ofpart partitions found on MTD device pl35x-nand
  Creating 6 MTD partitions on "pl35x-nand":
  0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
  0x000002800000-0x000004800000 : "ramfs"
  0x000004800000-0x000005000000 : "configs"
  0x000005000000-0x000006000000 : "reserve"
  0x000006000000-0x000008000000 : "ramfs-bak"
  0x000008000000-0x000010000000 : "reserve1"
  NET: Registered protocol family 10
  sit: IPv6 over IPv4 tunneling driver
  NET: Registered protocol family 17
  can: controller area network core (rev 20120528 abi 9)
  NET: Registered protocol family 29
  can: raw protocol (rev 20120528)
  can: broadcast manager protocol (rev 20120528 t)
  can: netlink gateway (rev 20130117) max_hops=1
  zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
  zynq_pm_late_init: Unable to map DDRC IO memory.
  Registering SWP/SWPB emulation handler
  hctosys: unable to open rtc device (rtc0)
  ALSA device list:
  No soundcards found.
  RAMDISK: gzip image found at block 0
  EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
  EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
  VFS: Mounted root (ext4 filesystem) on device 1:0.
  devtmpfs: mounted
  Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
  EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
  random: dd urandom read with 0 bits of entropy available
  ubi0: attaching mtd2
  ubi0: scanning is finished
  ubi0: attached mtd2 (name "configs", size 8 MiB)
  ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
  ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  ubi0: max/mean erase counter: 11/5, WL threshold: 4096, image sequence number: 237714726
  ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
  ubi0: background thread "ubi_bgt0d" started, PID 708
  UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
  UBIFS (ubi0:0): recovery needed
  UBIFS (ubi0:0): recovery completed
  UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
  UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
  UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
  UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model
  ubi1: attaching mtd5
  ubi1: scanning is finished
  ubi1: attached mtd5 (name "reserve1", size 128 MiB)
  ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
  ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
  ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
  ubi1: max/mean erase counter: 16/9, WL threshold: 4096, image sequence number: 437341943
  ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
  ubi1: background thread "ubi_bgt1d" started, PID 720
  UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
  UBIFS (ubi1:0): recovery needed
  UBIFS (ubi1:0): recovery completed
  UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
  UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
  UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
  UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID BED104AC-5B58-4F21-B7BB-4E8C6129D8F7, small LPT model
  IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
  macb e000b000.ethernet eth0: link up (100/Full)
  IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  In axi fpga driver!
  request_mem_region OK!
  AXI fpga dev virtual address is 0xcfb38000
  *base_vir_addr = 0xb023
  In fpga mem driver!
  request_mem_region OK!
  fpga mem virtual address is 0xd2000000
  random: nonblocking pool is initialized
  2020-04-21 15:38:52 driver-btm-api.c:741:init_freq_mode: This is scan-user version
  2020-04-21 15:38:52 driver-btm-api.c:2413:bitmain_soc_init: opt_multi_version = 1
  2020-04-21 15:38:52 driver-btm-api.c:2414:bitmain_soc_init: opt_bitmain_ab = 1
  2020-04-21 15:38:52 driver-btm-api.c:2415:bitmain_soc_init: opt_bitmain_work_mode = 0
  2020-04-21 15:38:52 driver-btm-api.c:2416:bitmain_soc_init: Miner compile time: Tue Apr 7 14:11:08 CST 2020 type: Antminer S17+
  2020-04-21 15:38:52 driver-btm-api.c:2417:bitmain_soc_init: commit version: 0fa7066 2020-04-06 22:14:32, build by: lol 2020-04-07 14:17:53
  2020-04-21 15:38:52 driver-btm-api.c:2033:show_sn: no SN got, please write SN to /config/sn
  2020-04-21 15:38:52 driver-btm-api.c:2423:bitmain_soc_init: show sn return -1
  2020-04-21 15:38:52 driver-btm-api.c:2065:handle_sn_for_factory_mode: show sn return -1
  2020-04-21 15:38:52 driver-btm-api.c:2084:handle_sn_for_factory_mode: read sn failed, use fpga-id to replace sn
  2020-04-21 15:38:52 driver-btm-api.c:2092:handle_sn_for_factory_mode: read fpga id success 81386d242b104814
  2020-04-21 15:38:52 fan.c:279:front_fan_power_on: Note: front fan is power on!
  2020-04-21 15:38:52 fan.c:291:rear_fan_power_on: Note: rear fan is power on!
  2020-04-21 15:38:52 driver-btm-api.c:1276:miner_device_init: Detect 256MB control board of XILINX
  2020-04-21 15:38:52 driver-btm-api.c:1217:init_fan_parameter: fan_eft : 0 fan_pwm : 100
  2020-04-21 15:38:58 driver-btm-api.c:1201:init_miner_version: miner ID : 81386d242b104814
  2020-04-21 15:38:58 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
  2020-04-21 15:39:04 Fixture CRC check fail.
  2020-04-21 15:39:04 Chain 2 data failed.
  2020-04-21 15:39:04 driver-btm-api.c:216:set_miner_status: ERROR_EEPROM_INFO
  2020-04-21 15:39:04 driver-btm-api.c:156:stop_mining: stop mining: Load data failed.

  2020-04-21 15:39:04 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****
  2020-04-21 15:39:06 power_api.c:186:power_off: init gpio907

  0

  评论操作 固定链接
• 

  Al Nemer

  • 2020年04月25日 01:12

  I have the same problem !

   

  my miner S17+ mines for a few minutes and drops to zero after that .

   

  alla,neme@gmail.com

  0

  评论操作 固定链接
• 

  Luke HAO-Technical Specialist

  • 2020年04月26日 02:08

  Hello guys

  If your miner has the issue of "ERROR_EEPROM_INFO",please try to upgrade the latest firmware,if it cannot be fixed after doing this,please send it back to repair.

  0

  评论操作 固定链接
• 

  Inmer Vargas

  • 2020年04月26日 22:24

  hi, this is my kernel log, i need help please!

  my s17+ mine only 47th..... always work on 70th....

   

  please help!

   

  Booting Linux on physical CPU 0x0
  Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
  CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
  CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  Machine model: Xilinx Zynq
  cma: Reserved 16 MiB at 0x0e000000
  Memory policy: Data cache writealloc
  On node 0 totalpages: 61440
  free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
  percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
  pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
  pcpu-alloc: [0] 0 [0] 1
  Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
  Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
  PID hash table entries: 1024 (order: 0, 4096 bytes)
  Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  Memory: 203444K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25932K reserved, 16384K cma-reserved, 0K highmem)
  Virtual kernel memory layout:
  vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
  lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
  pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  .text : 0xc0008000 - 0xc090c424 (9234 kB)
  .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
  .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
  .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
  Preemptible hierarchical RCU implementation.
  Build-time adjustment of leaf fanout to 32.
  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
  NR_IRQS:16 nr_irqs:16 16
  efuse mapped to cf800000
  ps7-slcr mapped to cf802000
  L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
  L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
  L2C-310 erratum 769419 enabled
  L2C-310 enabling early BRESP for Cortex-A9
  L2C-310 full line of zeros enabled for Cortex-A9
  L2C-310 ID prefetch enabled, offset 1 lines
  L2C-310 dynamic clock gating enabled, standby mode enabled
  L2C-310 cache controller enabled, 8 ways, 512 kB
  L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
  zynq_clock_init: clkc starts at cf802100
  Zynq clock init
  sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
  clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
  Switching to timer-based delay loop, resolution 3ns
  clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
  ps7-ttc #0 at cf80a000, irq=18
  Console: colour dummy device 80x30
  Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
  pid_max: default: 32768 minimum: 301
  Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  CPU: Testing write buffer coherency: ok
  CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  Setting up static identity map for 0x100000 - 0x100058
  CPU1: failed to boot: -1
  Brought up 1 CPUs
  SMP: Total of 1 processors activated (666.66 BogoMIPS).
  CPU: All CPU(s) started in SVC mode.
  devtmpfs: initialized
  VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  pinctrl core: initialized pinctrl subsystem
  NET: Registered protocol family 16
  DMA: preallocated 256 KiB pool for atomic coherent allocations
  cpuidle: using governor menu
  hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  hw-breakpoint: maximum watchpoint size is 4 bytes.
  zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
  vgaarb: loaded
  SCSI subsystem initialized
  usbcore: registered new interface driver usbfs
  usbcore: registered new interface driver hub
  usbcore: registered new device driver usb
  media: Linux media interface: v0.10
  Linux video capture interface: v2.00
  pps_core: LinuxPPS API ver. 1 registered
  pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  PTP clock support registered
  EDAC MC: Ver: 3.0.0
  Advanced Linux Sound Architecture Driver Initialized.
  clocksource: Switched to clocksource arm_global_timer
  NET: Registered protocol family 2
  TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  TCP: Hash tables configured (established 2048 bind 2048)
  UDP hash table entries: 256 (order: 1, 8192 bytes)
  UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  NET: Registered protocol family 1
  RPC: Registered named UNIX socket transport module.
  RPC: Registered udp transport module.
  RPC: Registered tcp transport module.
  RPC: Registered tcp NFSv4.1 backchannel transport module.
  PCI: CLS 0 bytes, default 64
  Trying to unpack rootfs image as initramfs...
  rootfs image is not initramfs (no cpio magic); looks like an initrd
  Freeing initrd memory: 12892K (cce6a000 - cdb01000)
  hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  futex hash table entries: 512 (order: 3, 32768 bytes)
  workingset: timestamp_bits=28 max_order=16 bucket_order=0
  jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  io scheduler noop registered
  io scheduler deadline registered
  io scheduler cfq registered (default)
  dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
  dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
  e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
  console [ttyPS0] enabled
  xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
  [drm] Initialized drm 1.1.0 20060810
  brd: module loaded
  loop: module loaded
  CAN device driver interface
  gpiod_set_value: invalid GPIO
  libphy: MACB_mii_bus: probed
  macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
  Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
  e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  ehci-pci: EHCI PCI platform driver
  usbcore: registered new interface driver usb-storage
  mousedev: PS/2 mouse device common for all mice
  i2c /dev entries driver
  Xilinx Zynq CpuIdle Driver started
  sdhci: Secure Digital Host Controller Interface driver
  sdhci: Copyright(c) Pierre Ossman
  sdhci-pltfm: SDHCI platform and OF driver helper
  mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
  ledtrig-cpu: registered to indicate activity on CPUs
  usbcore: registered new interface driver usbhid
  usbhid: USB HID core driver
  nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
  nand: Micron MT29F2G08ABAEAWP
  nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
  Bad block table found at page 131008, version 0x01
  Bad block table found at page 130944, version 0x01
  6 ofpart partitions found on MTD device pl35x-nand
  Creating 6 MTD partitions on "pl35x-nand":
  0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
  0x000002800000-0x000004800000 : "ramfs"
  0x000004800000-0x000005000000 : "configs"
  0x000005000000-0x000006000000 : "reserve"
  0x000006000000-0x000008000000 : "ramfs-bak"
  0x000008000000-0x000010000000 : "reserve1"
  NET: Registered protocol family 10
  sit: IPv6 over IPv4 tunneling driver
  NET: Registered protocol family 17
  can: controller area network core (rev 20120528 abi 9)
  NET: Registered protocol family 29
  can: raw protocol (rev 20120528)
  can: broadcast manager protocol (rev 20120528 t)
  can: netlink gateway (rev 20130117) max_hops=1
  zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
  zynq_pm_late_init: Unable to map DDRC IO memory.
  Registering SWP/SWPB emulation handler
  hctosys: unable to open rtc device (rtc0)
  ALSA device list:
  No soundcards found.
  RAMDISK: gzip image found at block 0
  EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
  EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
  VFS: Mounted root (ext4 filesystem) on device 1:0.
  devtmpfs: mounted
  Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
  EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
  random: dd urandom read with 0 bits of entropy available
  ubi0: attaching mtd2
  ubi0: scanning is finished
  ubi0: attached mtd2 (name "configs", size 8 MiB)
  ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
  ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  ubi0: max/mean erase counter: 21/7, WL threshold: 4096, image sequence number: 262741923
  ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
  ubi0: background thread "ubi_bgt0d" started, PID 708
  UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
  UBIFS (ubi0:0): recovery needed
  UBIFS (ubi0:0): recovery completed
  UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
  UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
  UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
  UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
  ubi1: attaching mtd5
  ubi1: scanning is finished
  ubi1: attached mtd5 (name "reserve1", size 128 MiB)
  ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
  ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
  ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
  ubi1: max/mean erase counter: 115/27, WL threshold: 4096, image sequence number: 3563076859
  ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
  ubi1: background thread "ubi_bgt1d" started, PID 720
  UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
  UBIFS (ubi1:0): recovery needed
  UBIFS (ubi1:0): recovery completed
  UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
  UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
  UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
  UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
  IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
  macb e000b000.ethernet eth0: link up (100/Full)
  IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  In axi fpga driver!
  request_mem_region OK!
  AXI fpga dev virtual address is 0xcfb38000
  *base_vir_addr = 0xb023
  In fpga mem driver!
  request_mem_region OK!
  fpga mem virtual address is 0xd2000000
  random: nonblocking pool is initialized
  2020-04-26 22:01:25 driver-btm-api.c:741:init_freq_mode: This is scan-user version
  2020-04-26 22:01:25 driver-btm-api.c:2413:bitmain_soc_init: opt_multi_version = 1
  2020-04-26 22:01:25 driver-btm-api.c:2414:bitmain_soc_init: opt_bitmain_ab = 1
  2020-04-26 22:01:25 driver-btm-api.c:2415:bitmain_soc_init: opt_bitmain_work_mode = 0
  2020-04-26 22:01:25 driver-btm-api.c:2416:bitmain_soc_init: Miner compile time: Tue Apr 7 14:11:08 CST 2020 type: Antminer S17+
  2020-04-26 22:01:25 driver-btm-api.c:2417:bitmain_soc_init: commit version: 0fa7066 2020-04-06 22:14:32, build by: lol 2020-04-07 14:17:53
  2020-04-26 22:01:25 driver-btm-api.c:2045:show_sn: len:16, 814c84242b10481c
  2020-04-26 22:01:25 driver-btm-api.c:2423:bitmain_soc_init: show sn return 1
  2020-04-26 22:01:25 driver-btm-api.c:2065:handle_sn_for_factory_mode: show sn return 1
  2020-04-26 22:01:25 driver-btm-api.c:2103:handle_sn_for_factory_mode: read sn success, 814c84242b10481c
  2020-04-26 22:01:25 fan.c:279:front_fan_power_on: Note: front fan is power on!
  2020-04-26 22:01:25 fan.c:291:rear_fan_power_on: Note: rear fan is power on!
  2020-04-26 22:01:25 driver-btm-api.c:1276:miner_device_init: Detect 256MB control board of XILINX
  2020-04-26 22:01:25 driver-btm-api.c:1217:init_fan_parameter: fan_eft : 0 fan_pwm : 0
  2020-04-26 22:01:31 driver-btm-api.c:1201:init_miner_version: miner ID : 814c84242b10481c
  2020-04-26 22:01:31 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
  2020-04-26 22:01:37 driver-btm-api.c:799:get_product_id: product_id[0] = 0
  2020-04-26 22:01:37 driver-btm-api.c:799:get_product_id: product_id[1] = 0
  2020-04-26 22:01:37 driver-btm-api.c:799:get_product_id: product_id[2] = 0
  2020-04-26 22:01:37 driver-btm-api.c:2196:update_conf_by_power_feedback: Power feedback is disabled
  2020-04-26 22:01:37 driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
  2020-04-26 22:01:37 driver-btm-api.c:2230:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
  2020-04-26 22:01:37 frequency.c:1366:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
  2020-04-26 22:01:37 thread.c:1066:create_read_nonce_reg_thread: create thread
  2020-04-26 22:01:43 driver-btm-api.c:1201:init_miner_version: miner ID : 814c84242b10481c
  2020-04-26 22:01:43 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
  2020-04-26 22:01:48 driver-btm-api.c:799:get_product_id: product_id[0] = 0
  2020-04-26 22:01:48 driver-btm-api.c:799:get_product_id: product_id[1] = 0
  2020-04-26 22:01:48 driver-btm-api.c:799:get_product_id: product_id[2] = 0
  2020-04-26 22:01:48 driver-btm-api.c:754:_set_project_type: project:0
  2020-04-26 22:01:48 driver-btm-api.c:775:_set_project_type: Project type: Antminer S17+
  2020-04-26 22:01:48 driver-btm-api.c:786:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
  2020-04-26 22:01:48 driver-btm-api.c:787:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
  2020-04-26 22:01:48 driver-btm-api.c:786:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
  2020-04-26 22:01:48 driver-btm-api.c:787:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
  2020-04-26 22:01:48 driver-btm-api.c:786:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
  2020-04-26 22:01:48 driver-btm-api.c:787:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
  2020-04-26 22:01:50 driver-btm-api.c:2334:bitmain_board_init: Fan check passed.
  2020-04-26 22:01:51 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
  2020-04-26 22:01:53 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
  2020-04-26 22:01:54 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
  2020-04-26 22:01:56 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
  2020-04-26 22:01:57 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
  2020-04-26 22:01:59 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
  2020-04-26 22:01:59 thread.c:1061:create_pic_heart_beat_thread: create thread
  2020-04-26 22:01:59 power_api.c:213:power_init: Power init:
  2020-04-26 22:01:59 power_api.c:214:power_init: current_voltage_raw = 0
  2020-04-26 22:01:59 power_api.c:215:power_init: highest_voltage_raw = 2100
  2020-04-26 22:01:59 power_api.c:216:power_init: working_voltage_raw = 1950
  2020-04-26 22:01:59 power_api.c:217:power_init: higher_voltage_raw = 2040
  2020-04-26 22:01:59 power_api.c:218:power_init: check_asic_voltage_raw = 2100
  2020-04-26 22:01:59 driver-btm-api.c:2344:bitmain_board_init: Enter 30s sleep to make sure power release finish.
  2020-04-26 22:01:59 power_api.c:186:power_off: init gpio907
  2020-04-26 22:02:31 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
  2020-04-26 22:02:57 power_api.c:85:check_voltage_multi: retry time: 0
  2020-04-26 22:02:58 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.206451
  2020-04-26 22:02:59 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.154640
  2020-04-26 22:03:00 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.255484
  2020-04-26 22:03:00 power_api.c:53:_get_avg_voltage: average_voltage = 21.205525
  2020-04-26 22:03:00 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.21, check voltage passed.
  2020-04-26 22:03:00 uart.c:72:set_baud: set fpga_baud to 115200
  2020-04-26 22:03:11 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
  2020-04-26 22:03:22 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
  2020-04-26 22:03:33 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
  2020-04-26 22:03:44 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
  2020-04-26 22:03:44 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
  chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
  2020-04-26 22:03:52 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 3
  2020-04-26 22:03:52 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
  2020-04-26 22:03:52 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
  2020-04-26 22:03:56 power_api.c:85:check_voltage_multi: retry time: 0
  2020-04-26 22:03:57 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.689434
  2020-04-26 22:03:58 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.613899
  2020-04-26 22:03:59 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.716129
  2020-04-26 22:03:59 power_api.c:53:_get_avg_voltage: average_voltage = 20.673154
  2020-04-26 22:03:59 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.67, check voltage passed.
  chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
  2020-04-26 22:04:08 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 4
  2020-04-26 22:04:08 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
  2020-04-26 22:04:08 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
  2020-04-26 22:04:12 power_api.c:85:check_voltage_multi: retry time: 0
  2020-04-26 22:04:13 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.199743
  2020-04-26 22:04:14 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.124839
  2020-04-26 22:04:15 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.225806
  2020-04-26 22:04:15 power_api.c:53:_get_avg_voltage: average_voltage = 20.183463
  2020-04-26 22:04:15 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.18, check voltage passed.
  chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
  2020-04-26 22:04:24 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 5
  2020-04-26 22:04:24 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
  2020-04-26 22:04:24 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
  2020-04-26 22:04:29 power_api.c:85:check_voltage_multi: retry time: 0
  2020-04-26 22:04:30 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.179125
  2020-04-26 22:04:31 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.102960
  2020-04-26 22:04:33 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.206451
  2020-04-26 22:04:33 power_api.c:53:_get_avg_voltage: average_voltage = 21.162845
  2020-04-26 22:04:33 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.16, check voltage passed.
  2020-04-26 22:04:33 driver-btm-api.c:1155:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
  2020-04-26 22:04:34 driver-btm-api.c:1157:check_asic_number: Chain 1 voltage: an0 = 2.783871, an2 2.783871, an6 2.506452.
  2020-04-26 22:04:46 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
  2020-04-26 22:04:51 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
  2020-04-26 22:04:51 driver-btm-api.c:397:set_order_clock: chain[0]: set order clock, stragegy 3
  2020-04-26 22:04:51 driver-btm-api.c:397:set_order_clock: chain[2]: set order clock, stragegy 3
  2020-04-26 22:04:52 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
  2020-04-26 22:04:52 driver-btm-api.c:1854:check_clock_counter: freq 50 clock_counter_limit 6
  2020-04-26 22:04:52 voltage[0] = 1960
  2020-04-26 22:04:52 voltage[2] = 1960
  2020-04-26 22:04:52 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1960
  2020-04-26 22:04:53 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
  2020-04-26 22:04:55 temperature.c:340:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
  2020-04-26 22:04:55 uart.c:72:set_baud: set fpga_baud to 12000000
  2020-04-26 22:04:55 driver-btm-api.c:264:check_bringup_temp: Bring up temperature is 27
  2020-04-26 22:04:55 thread.c:1081:create_check_miner_status_thread: create thread
  2020-04-26 22:04:55 thread.c:1071:create_show_miner_status_thread: create thread
  2020-04-26 22:04:55 thread.c:1051:create_temperature_monitor_thread: create thread
  2020-04-26 22:04:55 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
  2020-04-26 22:04:55 driver-btm-api.c:1727:send_null_work: [DEBUG] Send null work.
  2020-04-26 22:04:55 thread.c:1041:create_asic_status_monitor_thread: create thread
  2020-04-26 22:04:55 frequency.c:1019:inc_freq_with_fixed_vco: chain = 255, freq = 540, is_higher_voltage = true
  2020-04-26 22:04:55 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
  2020-04-26 22:04:57 power_api.c:85:check_voltage_multi: retry time: 0
  2020-04-26 22:04:58 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.056702
  2020-04-26 22:04:59 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.081186
  2020-04-26 22:04:59 power_api.c:53:_get_avg_voltage: average_voltage = 21.068944
  2020-04-26 22:04:59 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 21.07, check voltage passed.
  2020-04-26 22:05:20 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2080, step by step.
  2020-04-26 22:05:21 power_api.c:85:check_voltage_multi: retry time: 0
  2020-04-26 22:05:22 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.909795
  2020-04-26 22:05:23 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.934279
  2020-04-26 22:05:23 power_api.c:53:_get_avg_voltage: average_voltage = 20.922037
  2020-04-26 22:05:23 power_api.c:71:check_voltage: target_vol = 20.80, actural_vol = 20.92, check voltage passed.
  2020-04-26 22:05:23 frequency.c:1090:inc_asic_diff_freq_by_steps: chain = 0, start = 540, freq_step = 5
  2020-04-26 22:05:26 frequency.c:1090:inc_asic_diff_freq_by_steps: chain = 2, start = 540, freq_step = 5
  2020-04-26 22:05:29 driver-btm-api.c:727:set_timeout: freq = 560, percent = 90, hcn = 44236, timeout = 78
  2020-04-26 22:05:29 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1960, step by step.
  2020-04-26 22:05:34 power_api.c:85:check_voltage_multi: retry time: 0
  2020-04-26 22:05:35 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.759021
  2020-04-26 22:05:36 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.734537
  2020-04-26 22:05:36 power_api.c:53:_get_avg_voltage: average_voltage = 19.746779
  2020-04-26 22:05:36 power_api.c:71:check_voltage: target_vol = 19.60, actural_vol = 19.75, check voltage passed.
  2020-04-26 22:05:36 thread.c:1076:create_check_system_status_thread: create thread
  2020-04-26 22:05:37 driver-btm-api.c:2577:bitmain_soc_init: Init done!
  2020-04-26 22:05:37 driver-btm-api.c:216:set_miner_status: STATUS_INIT
  2020-04-26 22:05:41 driver-btm-api.c:216:set_miner_status: STATUS_OKAY
  2020-04-26 22:05:42 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 47016
  2020-04-26 22:05:42 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 46000
  2020-04-26 22:05:46 driver-btm-api.c:1458:dhash_chip_send_job: Version num 1.
  2020-04-26 22:05:50 driver-btm-api.c:1458:dhash_chip_send_job: Version num 4.
  2020-04-26 22:05:50 driver-btm-api.c:1606:dhash_chip_send_job: stime.tv_sec 1587938750, block_ntime 1587938747Booting Linux on physical CPU 0x0
  Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
  CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
  CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  Machine model: Xilinx Zynq
  cma: Reserved 16 MiB at 0x0e000000
  Memory policy: Data cache writealloc
  On node 0 totalpages: 61440
  free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
  percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
  pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
  pcpu-alloc: [0] 0 [0] 1
  Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
  Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
  PID hash table entries: 1024 (order: 0, 4096 bytes)
  Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  Memory: 203444K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25932K reserved, 16384K cma-reserved, 0K highmem)
  Virtual kernel memory layout:
  vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
  lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
  pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  .text : 0xc0008000 - 0xc090c424 (9234 kB)
  .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
  .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
  .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
  Preemptible hierarchical RCU implementation.
  Build-time adjustment of leaf fanout to 32.
  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
  NR_IRQS:16 nr_irqs:16 16
  efuse mapped to cf800000
  ps7-slcr mapped to cf802000
  L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
  L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
  L2C-310 erratum 769419 enabled
  L2C-310 enabling early BRESP for Cortex-A9
  L2C-310 full line of zeros enabled for Cortex-A9
  L2C-310 ID prefetch enabled, offset 1 lines
  L2C-310 dynamic clock gating enabled, standby mode enabled
  L2C-310 cache controller enabled, 8 ways, 512 kB
  L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
  zynq_clock_init: clkc starts at cf802100
  Zynq clock init
  sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
  clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
  Switching to timer-based delay loop, resolution 3ns
  clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
  ps7-ttc #0 at cf80a000, irq=18
  Console: colour dummy device 80x30
  Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
  pid_max: default: 32768 minimum: 301
  Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  CPU: Testing write buffer coherency: ok
  CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  Setting up static identity map for 0x100000 - 0x100058
  CPU1: failed to boot: -1
  Brought up 1 CPUs
  SMP: Total of 1 processors activated (666.66 BogoMIPS).
  CPU: All CPU(s) started in SVC mode.
  devtmpfs: initialized
  VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  pinctrl core: initialized pinctrl subsystem
  NET: Registered protocol family 16
  DMA: preallocated 256 KiB pool for atomic coherent allocations
  cpuidle: using governor menu
  hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  hw-breakpoint: maximum watchpoint size is 4 bytes.
  zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
  vgaarb: loaded
  SCSI subsystem initialized
  usbcore: registered new interface driver usbfs
  usbcore: registered new interface driver hub
  usbcore: registered new device driver usb
  media: Linux media interface: v0.10
  Linux video capture interface: v2.00
  pps_core: LinuxPPS API ver. 1 registered
  pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  PTP clock support registered
  EDAC MC: Ver: 3.0.0
  Advanced Linux Sound Architecture Driver Initialized.
  clocksource: Switched to clocksource arm_global_timer
  NET: Registered protocol family 2
  TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  TCP: Hash tables configured (established 2048 bind 2048)
  UDP hash table entries: 256 (order: 1, 8192 bytes)
  UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  NET: Registered protocol family 1
  RPC: Registered named UNIX socket transport module.
  RPC: Registered udp transport module.
  RPC: Registered tcp transport module.
  RPC: Registered tcp NFSv4.1 backchannel transport module.
  PCI: CLS 0 bytes, default 64
  Trying to unpack rootfs image as initramfs...
  rootfs image is not initramfs (no cpio magic); looks like an initrd
  Freeing initrd memory: 12892K (cce6a000 - cdb01000)
  hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  futex hash table entries: 512 (order: 3, 32768 bytes)
  workingset: timestamp_bits=28 max_order=16 bucket_order=0
  jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  io scheduler noop registered
  io scheduler deadline registered
  io scheduler cfq registered (default)
  dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
  dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
  e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
  console [ttyPS0] enabled
  xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
  [drm] Initialized drm 1.1.0 20060810
  brd: module loaded
  loop: module loaded
  CAN device driver interface
  gpiod_set_value: invalid GPIO
  libphy: MACB_mii_bus: probed
  macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
  Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
  e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  ehci-pci: EHCI PCI platform driver
  usbcore: registered new interface driver usb-storage
  mousedev: PS/2 mouse device common for all mice
  i2c /dev entries driver
  Xilinx Zynq CpuIdle Driver started
  sdhci: Secure Digital Host Controller Interface driver
  sdhci: Copyright(c) Pierre Ossman
  sdhci-pltfm: SDHCI platform and OF driver helper
  mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
  ledtrig-cpu: registered to indicate activity on CPUs
  usbcore: registered new interface driver usbhid
  usbhid: USB HID core driver
  nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
  nand: Micron MT29F2G08ABAEAWP
  nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
  Bad block table found at page 131008, version 0x01
  Bad block table found at page 130944, version 0x01
  6 ofpart partitions found on MTD device pl35x-nand
  Creating 6 MTD partitions on "pl35x-nand":
  0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
  0x000002800000-0x000004800000 : "ramfs"
  0x000004800000-0x000005000000 : "configs"
  0x000005000000-0x000006000000 : "reserve"
  0x000006000000-0x000008000000 : "ramfs-bak"
  0x000008000000-0x000010000000 : "reserve1"
  NET: Registered protocol family 10
  sit: IPv6 over IPv4 tunneling driver
  NET: Registered protocol family 17
  can: controller area network core (rev 20120528 abi 9)
  NET: Registered protocol family 29
  can: raw protocol (rev 20120528)
  can: broadcast manager protocol (rev 20120528 t)
  can: netlink gateway (rev 20130117) max_hops=1
  zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
  zynq_pm_late_init: Unable to map DDRC IO memory.
  Registering SWP/SWPB emulation handler
  hctosys: unable to open rtc device (rtc0)
  ALSA device list:
  No soundcards found.
  RAMDISK: gzip image found at block 0
  EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
  EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
  VFS: Mounted root (ext4 filesystem) on device 1:0.
  devtmpfs: mounted
  Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
  EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
  random: dd urandom read with 0 bits of entropy available
  ubi0: attaching mtd2
  ubi0: scanning is finished
  ubi0: attached mtd2 (name "configs", size 8 MiB)
  ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
  ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  ubi0: max/mean erase counter: 21/7, WL threshold: 4096, image sequence number: 262741923
  ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
  ubi0: background thread "ubi_bgt0d" started, PID 708
  UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
  UBIFS (ubi0:0): recovery needed
  UBIFS (ubi0:0): recovery completed
  UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
  UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
  UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
  UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
  ubi1: attaching mtd5
  ubi1: scanning is finished
  ubi1: attached mtd5 (name "reserve1", size 128 MiB)
  ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
  ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
  ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
  ubi1: max/mean erase counter: 115/27, WL threshold: 4096, image sequence number: 3563076859
  ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
  ubi1: background thread "ubi_bgt1d" started, PID 720
  UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
  UBIFS (ubi1:0): recovery needed
  UBIFS (ubi1:0): recovery completed
  UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
  UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
  UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
  UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
  IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
  macb e000b000.ethernet eth0: link up (100/Full)
  IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  In axi fpga driver!
  request_mem_region OK!
  AXI fpga dev virtual address is 0xcfb38000
  *base_vir_addr = 0xb023
  In fpga mem driver!
  request_mem_region OK!
  fpga mem virtual address is 0xd2000000
  random: nonblocking pool is initialized
  2020-04-26 22:01:25 driver-btm-api.c:741:init_freq_mode: This is scan-user version
  2020-04-26 22:01:25 driver-btm-api.c:2413:bitmain_soc_init: opt_multi_version = 1
  2020-04-26 22:01:25 driver-btm-api.c:2414:bitmain_soc_init: opt_bitmain_ab = 1
  2020-04-26 22:01:25 driver-btm-api.c:2415:bitmain_soc_init: opt_bitmain_work_mode = 0
  2020-04-26 22:01:25 driver-btm-api.c:2416:bitmain_soc_init: Miner compile time: Tue Apr 7 14:11:08 CST 2020 type: Antminer S17+
  2020-04-26 22:01:25 driver-btm-api.c:2417:bitmain_soc_init: commit version: 0fa7066 2020-04-06 22:14:32, build by: lol 2020-04-07 14:17:53
  2020-04-26 22:01:25 driver-btm-api.c:2045:show_sn: len:16, 814c84242b10481c
  2020-04-26 22:01:25 driver-btm-api.c:2423:bitmain_soc_init: show sn return 1
  2020-04-26 22:01:25 driver-btm-api.c:2065:handle_sn_for_factory_mode: show sn return 1
  2020-04-26 22:01:25 driver-btm-api.c:2103:handle_sn_for_factory_mode: read sn success, 814c84242b10481c
  2020-04-26 22:01:25 fan.c:279:front_fan_power_on: Note: front fan is power on!
  2020-04-26 22:01:25 fan.c:291:rear_fan_power_on: Note: rear fan is power on!
  2020-04-26 22:01:25 driver-btm-api.c:1276:miner_device_init: Detect 256MB control board of XILINX
  2020-04-26 22:01:25 driver-btm-api.c:1217:init_fan_parameter: fan_eft : 0 fan_pwm : 0
  2020-04-26 22:01:31 driver-btm-api.c:1201:init_miner_version: miner ID : 814c84242b10481c
  2020-04-26 22:01:31 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
  2020-04-26 22:01:37 driver-btm-api.c:799:get_product_id: product_id[0] = 0
  2020-04-26 22:01:37 driver-btm-api.c:799:get_product_id: product_id[1] = 0
  2020-04-26 22:01:37 driver-btm-api.c:799:get_product_id: product_id[2] = 0
  2020-04-26 22:01:37 driver-btm-api.c:2196:update_conf_by_power_feedback: Power feedback is disabled
  2020-04-26 22:01:37 driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
  2020-04-26 22:01:37 driver-btm-api.c:2230:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
  2020-04-26 22:01:37 frequency.c:1366:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
  2020-04-26 22:01:37 thread.c:1066:create_read_nonce_reg_thread: create thread
  2020-04-26 22:01:43 driver-btm-api.c:1201:init_miner_version: miner ID : 814c84242b10481c
  2020-04-26 22:01:43 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
  2020-04-26 22:01:48 driver-btm-api.c:799:get_product_id: product_id[0] = 0
  2020-04-26 22:01:48 driver-btm-api.c:799:get_product_id: product_id[1] = 0
  2020-04-26 22:01:48 driver-btm-api.c:799:get_product_id: product_id[2] = 0
  2020-04-26 22:01:48 driver-btm-api.c:754:_set_project_type: project:0
  2020-04-26 22:01:48 driver-btm-api.c:775:_set_project_type: Project type: Antminer S17+
  2020-04-26 22:01:48 driver-btm-api.c:786:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
  2020-04-26 22:01:48 driver-btm-api.c:787:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
  2020-04-26 22:01:48 driver-btm-api.c:786:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
  2020-04-26 22:01:48 driver-btm-api.c:787:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
  2020-04-26 22:01:48 driver-btm-api.c:786:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
  2020-04-26 22:01:48 driver-btm-api.c:787:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
  2020-04-26 22:01:50 driver-btm-api.c:2334:bitmain_board_init: Fan check passed.
  2020-04-26 22:01:51 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
  2020-04-26 22:01:53 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
  2020-04-26 22:01:54 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
  2020-04-26 22:01:56 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
  2020-04-26 22:01:57 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
  2020-04-26 22:01:59 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
  2020-04-26 22:01:59 thread.c:1061:create_pic_heart_beat_thread: create thread
  2020-04-26 22:01:59 power_api.c:213:power_init: Power init:
  2020-04-26 22:01:59 power_api.c:214:power_init: current_voltage_raw = 0
  2020-04-26 22:01:59 power_api.c:215:power_init: highest_voltage_raw = 2100
  2020-04-26 22:01:59 power_api.c:216:power_init: working_voltage_raw = 1950
  2020-04-26 22:01:59 power_api.c:217:power_init: higher_voltage_raw = 2040
  2020-04-26 22:01:59 power_api.c:218:power_init: check_asic_voltage_raw = 2100
  2020-04-26 22:01:59 driver-btm-api.c:2344:bitmain_board_init: Enter 30s sleep to make sure power release finish.
  2020-04-26 22:01:59 power_api.c:186:power_off: init gpio907
  2020-04-26 22:02:31 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
  2020-04-26 22:02:57 power_api.c:85:check_voltage_multi: retry time: 0
  2020-04-26 22:02:58 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.206451
  2020-04-26 22:02:59 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.154640
  2020-04-26 22:03:00 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.255484
  2020-04-26 22:03:00 power_api.c:53:_get_avg_voltage: average_voltage = 21.205525
  2020-04-26 22:03:00 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.21, check voltage passed.
  2020-04-26 22:03:00 uart.c:72:set_baud: set fpga_baud to 115200
  2020-04-26 22:03:11 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
  2020-04-26 22:03:22 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
  2020-04-26 22:03:33 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
  2020-04-26 22:03:44 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
  2020-04-26 22:03:44 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
  chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
  2020-04-26 22:03:52 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 3
  2020-04-26 22:03:52 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
  2020-04-26 22:03:52 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
  2020-04-26 22:03:56 power_api.c:85:check_voltage_multi: retry time: 0
  2020-04-26 22:03:57 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.689434
  2020-04-26 22:03:58 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.613899
  2020-04-26 22:03:59 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.716129
  2020-04-26 22:03:59 power_api.c:53:_get_avg_voltage: average_voltage = 20.673154
  2020-04-26 22:03:59 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.67, check voltage passed.
  chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
  2020-04-26 22:04:08 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 4
  2020-04-26 22:04:08 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
  2020-04-26 22:04:08 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
  2020-04-26 22:04:12 power_api.c:85:check_voltage_multi: retry time: 0
  2020-04-26 22:04:13 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.199743
  2020-04-26 22:04:14 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.124839
  2020-04-26 22:04:15 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.225806
  2020-04-26 22:04:15 power_api.c:53:_get_avg_voltage: average_voltage = 20.183463
  2020-04-26 22:04:15 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.18, check voltage passed.
  chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
  2020-04-26 22:04:24 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 5
  2020-04-26 22:04:24 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
  2020-04-26 22:04:24 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
  2020-04-26 22:04:29 power_api.c:85:check_voltage_multi: retry time: 0
  2020-04-26 22:04:30 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.179125
  2020-04-26 22:04:31 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.102960
  2020-04-26 22:04:33 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.206451
  2020-04-26 22:04:33 power_api.c:53:_get_avg_voltage: average_voltage = 21.162845
  2020-04-26 22:04:33 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.16, check voltage passed.
  2020-04-26 22:04:33 driver-btm-api.c:1155:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
  2020-04-26 22:04:34 driver-btm-api.c:1157:check_asic_number: Chain 1 voltage: an0 = 2.783871, an2 2.783871, an6 2.506452.
  2020-04-26 22:04:46 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
  2020-04-26 22:04:51 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
  2020-04-26 22:04:51 driver-btm-api.c:397:set_order_clock: chain[0]: set order clock, stragegy 3
  2020-04-26 22:04:51 driver-btm-api.c:397:set_order_clock: chain[2]: set order clock, stragegy 3
  2020-04-26 22:04:52 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
  2020-04-26 22:04:52 driver-btm-api.c:1854:check_clock_counter: freq 50 clock_counter_limit 6
  2020-04-26 22:04:52 voltage[0] = 1960
  2020-04-26 22:04:52 voltage[2] = 1960
  2020-04-26 22:04:52 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1960
  2020-04-26 22:04:53 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
  2020-04-26 22:04:55 temperature.c:340:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
  2020-04-26 22:04:55 uart.c:72:set_baud: set fpga_baud to 12000000
  2020-04-26 22:04:55 driver-btm-api.c:264:check_bringup_temp: Bring up temperature is 27
  2020-04-26 22:04:55 thread.c:1081:create_check_miner_status_thread: create thread
  2020-04-26 22:04:55 thread.c:1071:create_show_miner_status_thread: create thread
  2020-04-26 22:04:55 thread.c:1051:create_temperature_monitor_thread: create thread
  2020-04-26 22:04:55 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
  2020-04-26 22:04:55 driver-btm-api.c:1727:send_null_work: [DEBUG] Send null work.
  2020-04-26 22:04:55 thread.c:1041:create_asic_status_monitor_thread: create thread
  2020-04-26 22:04:55 frequency.c:1019:inc_freq_with_fixed_vco: chain = 255, freq = 540, is_higher_voltage = true
  2020-04-26 22:04:55 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
  2020-04-26 22:04:57 power_api.c:85:check_voltage_multi: retry time: 0
  2020-04-26 22:04:58 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.056702
  2020-04-26 22:04:59 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.081186
  2020-04-26 22:04:59 power_api.c:53:_get_avg_voltage: average_voltage = 21.068944
  2020-04-26 22:04:59 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 21.07, check voltage passed.
  2020-04-26 22:05:20 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2080, step by step.
  2020-04-26 22:05:21 power_api.c:85:check_voltage_multi: retry time: 0
  2020-04-26 22:05:22 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.909795
  2020-04-26 22:05:23 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.934279
  2020-04-26 22:05:23 power_api.c:53:_get_avg_voltage: average_voltage = 20.922037
  2020-04-26 22:05:23 power_api.c:71:check_voltage: target_vol = 20.80, actural_vol = 20.92, check voltage passed.
  2020-04-26 22:05:23 frequency.c:1090:inc_asic_diff_freq_by_steps: chain = 0, start = 540, freq_step = 5
  2020-04-26 22:05:26 frequency.c:1090:inc_asic_diff_freq_by_steps: chain = 2, start = 540, freq_step = 5
  2020-04-26 22:05:29 driver-btm-api.c:727:set_timeout: freq = 560, percent = 90, hcn = 44236, timeout = 78
  2020-04-26 22:05:29 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1960, step by step.
  2020-04-26 22:05:34 power_api.c:85:check_voltage_multi: retry time: 0
  2020-04-26 22:05:35 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.759021
  2020-04-26 22:05:36 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.734537
  2020-04-26 22:05:36 power_api.c:53:_get_avg_voltage: average_voltage = 19.746779
  2020-04-26 22:05:36 power_api.c:71:check_voltage: target_vol = 19.60, actural_vol = 19.75, check voltage passed.
  2020-04-26 22:05:36 thread.c:1076:create_check_system_status_thread: create thread
  2020-04-26 22:05:37 driver-btm-api.c:2577:bitmain_soc_init: Init done!
  2020-04-26 22:05:37 driver-btm-api.c:216:set_miner_status: STATUS_INIT
  2020-04-26 22:05:41 driver-btm-api.c:216:set_miner_status: STATUS_OKAY
  2020-04-26 22:05:42 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 47016
  2020-04-26 22:05:42 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 46000
  2020-04-26 22:05:46 driver-btm-api.c:1458:dhash_chip_send_job: Version num 1.
  2020-04-26 22:05:50 driver-btm-api.c:1458:dhash_chip_send_job: Version num 4.
  2020-04-26 22:05:50 driver-btm-api.c:1606:dhash_chip_send_job: stime.tv_sec 1587938750, block_ntime 1587938747
  
  

   

   

  0

  评论操作 固定链接
• 

  Luke HAO-Technical Specialist

  • 2020年04月27日 02:10

  Hello，Inmer Vargas

  Please check if the signal cables are well connected,replug them, if it cannot be fixed after doing this,please send it back to repair,sorry about that.

  0

  评论操作 固定链接
• 

  iLotie

  • 2020年04月27日 20:14

  Hi Luke HAO-Technical Specialist, I have the problem that Inmer, I do what you advise, the problem always remains.

   

  I have the same error line as him, I have another line that I would like to show you.

  What do you think?

  1970-01-01 00:05:42 voltage[0] = 1960
  1970-01-01 00:05:42 voltage[1] = 1960
  1970-01-01 00:05:42 voltage[2] = 1960
  1970-01-01 00:05:42 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1960
  1970-01-01 00:05:43 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
  1970-01-01 00:05:44 temperature.c:340:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
  1970-01-01 00:05:45 temperature.c:340:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
  1970-01-01 00:05:45 uart.c:72:set_baud: set fpga_baud to 12000000
  1970-01-01 00:05:46 temperature.c:838:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 0
  1970-01-01 00:05:46 temperature.c:838:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1
  1970-01-01 00:05:47 temperature.c:838:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 0
  1970-01-01 00:05:47 temperature.c:838:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1
  1970-01-01 00:05:47 temperature.c:838:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 0
  1970-01-01 00:05:48 temperature.c:838:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
  1970-01-01 00:05:48 temperature.c:838:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 0
  1970-01-01 00:05:49 temperature.c:838:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
  1970-01-01 00:05:49 temperature.c:865:get_temp_info: ERROR: chain 1 can get NONE temp info or temp value abnormal, power it off
  1970-01-01 00:05:50 driver-btm-api.c:264:check_bringup_temp: Bring up temperature is 25
  1970-01-01 00:05:50 thread.c:1081:create_check_miner_status_thread: create thread
  1970-01-01 00:05:50 thread.c:1071:create_show_miner_status_thread: create thread
  1970-01-01 00:05:50 thread.c:1051:create_temperature_monitor_thread: create thread
  1970-01-01 00:05:50 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
  1970-01-01 00:05:50 driver-btm-api.c:1727:send_null_work: [DEBUG] Send null work.
  1970-01-01 00:05:50 thread.c:1041:create_asic_status_monitor_thread: create thread
  1970-01-01 00:05:50 frequency.c:1019:inc_freq_with_fixed_vco: chain = 255, freq = 530, is_higher_voltage = true
  1970-01-01 00:06:07 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
  1970-01-01 00:06:09 power_api.c:85:check_voltage_multi: retry time: 0
  1970-01-01 00:06:10 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.977156
  1970-01-01 00:06:11 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.052097
  1970-01-01 00:06:11 power_api.c:53:_get_avg_voltage: average_voltage = 21.014627
  1970-01-01 00:06:11 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 21.01, check voltage passed.
  1970-01-01 00:06:14 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2080, step by step.
  1970-01-01 00:06:16 power_api.c:85:check_voltage_multi: retry time: 0
  1970-01-01 00:06:17 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.883101
  1970-01-01 00:06:18 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.907243
  1970-01-01 00:06:18 power_api.c:53:_get_avg_voltage: average_voltage = 20.895172
  1970-01-01 00:06:18 power_api.c:71:check_voltage: target_vol = 20.80, actural_vol = 20.90, check voltage passed.
  1970-01-01 00:06:18 frequency.c:1090:inc_asic_diff_freq_by_steps: chain = 0, start = 530, freq_step = 5
  1970-01-01 00:06:25 frequency.c:1090:inc_asic_diff_freq_by_steps: chain = 2, start = 530, freq_step = 5
  1970-01-01 00:06:29 driver-btm-api.c:727:set_timeout: freq = 580, percent = 90, hcn = 44236, timeout = 76
  1970-01-01 00:06:29 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1960, step by step.
  1970-01-01 00:06:34 power_api.c:85:check_voltage_multi: retry time: 0
  1970-01-01 00:06:36 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.724270
  1970-01-01 00:06:37 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.748412
  1970-01-01 00:06:37 power_api.c:53:_get_avg_voltage: average_voltage = 19.736341
  1970-01-01 00:06:37 power_api.c:71:check_voltage: target_vol = 19.60, actural_vol = 19.74, check voltage passed.
  1970-01-01 00:06:37 thread.c:1076:create_check_system_status_thread: create thread
  1970-01-01 00:06:37 driver-btm-api.c:2577:bitmain_soc_init: Init done!
  1970-01-01 00:06:37 driver-btm-api.c:216:set_miner_status: STATUS_INIT
  1970-01-01 00:06:42 driver-btm-api.c:216:set_miner_status: STATUS_OKAY
  1970-01-01 00:06:43 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 47357
  1970-01-01 00:06:43 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 46000
  1970-01-01 00:08:16 driver-btm-api.c:1458:dhash_chip_send_job: Version num 4.
  1970-01-01 00:08:16 driver-btm-api.c:1606:dhash_chip_send_job: stime.tv_sec 496, block_ntime 1588017471
  2020-04-27 19:58:00 log.c:106:_log_update_name: _log_update_name
  2020-04-27 19:58:00 log.c:106:_log_update_name: _log_update_name

  0

  评论操作 固定链接
• 

  Luke HAO-Technical Specialist

  • 2020年04月28日 02:28

  Hello,iLotie

  The failure information is read temp sensor failed,please use SD card recovery image to recover it,and upgrade the latest firmware again.

  0

  评论操作 固定链接
• 

  iLotie

  • 2020年05月05日 17:36

  Hi  Luke HAO-Technical Specialist , I did what you said I still have the same concerns so I install the update on my second S17 + the versoin works very well. Could you contact me on my email address please because I don't know what else to do.

  guitteaudloick@gmail.com

  0

  评论操作 固定链接
• 

  Nickole

  • 2020年05月09日 08:52

  Hello, I am having the same problem with a S17+, can you send me the firmware?
  And if this does not help, you can send the nct218 positioning sensor, I want to replace it
  My email address: cricketer@yandex.ru

  0

  评论操作 固定链接
• 

  Fitzy2012

  • 2020年05月17日 23:34

  Hello, I am having the same problem with a S17+, can you send me the firmware?
  My email address fitzy2012@me.com

  0

  评论操作 固定链接
• 

  Paulo Lobo

  • 2020年06月04日 08:01

  Hi

   

  Dear Bitman Support 

   

  I have a antminer s17+ 67t with only 3 months, and yesterday the machine has lost one of the chains, saying that the chain 2 has zero chips ! 

  From what i see here there is a firmware to repair this problem ?? 

  Can you please send it to my email ?

  ct2gnh@gmail.com

   

  Thanks for your atencion ! 

  0

  评论操作 固定链接
• 

  Kelly Hwang

  • 2020年06月16日 02:48

  Hi Support, S17+ also lost 2 chains. Can you send me the firmware please, thank you. Kelly64@gmail.com

  0

  评论操作 固定链接
• 

  Pavel K

  • 2020年06月18日 08:56

  Hello, I have the same problem with S17 +, can you send me the firmware?
  My email address is ksbm@rambler.ru

  0

  评论操作 固定链接
• 

  Agustin Calderon

  • 2020年07月09日 00:51

  Hello, same problem here. please, send the firmware: agustincldevel@gmail.com
  
  Thanks in advance.

  0

  评论操作 固定链接
• 

  siruxtokyo

  • 2020年07月20日 15:15

  Luke HAO-Technical Specialist

   

  I have a T17+   I  BUY A FEW , BUT I HAVING PROBLEM WITH ONE

   

   

  2020-07-20 14:57:26 power_api.c:56:_get_avg_voltage: an6 raw = 2.516129, factor = 1.006452
  2020-07-20 14:57:26 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.633333, an2 20.047436, an6 2.500000.
  2020-07-20 14:57:26 power_api.c:85:_get_avg_voltage: average_voltage = 20.022663
  2020-07-20 14:57:26 power_api.c:106:check_voltage: target_vol = 20.00, actural_vol = 20.02, check voltage passed.

   

   

  2020-07-20 14:57:34 driver-btm-api.c:1167:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 3
  2020-07-20 14:57:45 driver-btm-api.c:1168:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 4
  chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
  2020-07-20 14:57:54 driver-btm-api.c:1169:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 5
  chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
  2020-07-20 14:58:03 driver-btm-api.c:1170:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 6

   

   

  2020-07-20 14:58:03 driver-btm-api.c:1235:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
  2020-07-20 14:58:04 driver-btm-api.c:1238:check_asic_number: Chain 1 voltage: an0 = 20.250323, an2 20.176774, an6 2.522581.
  2020-07-20 14:58:05 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step.
  2020-07-20 14:58:20 power_api.c:120:check_voltage_multi: retry time: 0
  2020-07-20 14:58:21 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
  2020-07-20 14:58:21 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.609756, an2 18.512195, an6 2.500000.

   

   

   

  CAN YOU SENDME THE FIRMWARE FOR T17+

  siruxtokyo@yahoo.com.ar

   

   

  PLZ

   

  0

  评论操作 固定链接

请先登录再写评论。