antminer k5 solid red and green led

评论

19 条评论

    Hello Sir

             Would you please send the screenshot of "overview"and"miner status"page,and also the kernel log to me?I'll do a troubleshooting,thank you very much!

    0
    评论操作 固定链接

    Hi Luke , I can't access that information as the miner does not boot up and don't connect to the internet , tried IPReporter , advanced IP scanner and on my router connected devices only shows my pc and my other miner.

    0
    评论操作 固定链接

    Hello Sacalul777

    Do you have a known new control board for K5?If you have one, please change the control board for it and try again.

    Did you try to reset it back to factory setting?and please leave me an email, I will send you the SD card recovery image of K5 miner to you.you can try to fix it with the image.

    -1
    评论操作 固定链接

    Hi , don't have any other K5 control board as it's a new miner.

    I did try to reset it to factory settings but it did not work , it did not power down and it did not made any souds , it just stayed the same.

    if you will send me a SD card recovery image , please send me a guide to follow or let me know how to use it as I never did this before.

    Thanks

    0
    评论操作 固定链接

    Hi,Sacalul777

    Sent!

    0
    评论操作 固定链接

    Hi, the image file that you had sent me does not have the passwd file inside the bin folder

    0
    评论操作 固定链接

    Hi , I put the image on the SD card , now the miner shows on the router but I cant connect it , solid red and green lights are both on just like before , only difference is that it shows on the router

    0
    评论操作 固定链接

    Hi,Sacalul777

    Yes,just no password, the other parts of the operation is the same. please confirm that the SD card recover is successful,If you still can't get into the miner's background, it means there could be something wrong with the control board.

    0
    评论操作 固定链接

    The SD card recover was successful , during recovery the lights start blinking just like in the video that you sent me.

    Now it shows on my router but can't connect to it, and resetting the miner from the button still not working.

    Thanks

    0
    评论操作 固定链接

    Can you please tell me what is the maximum temperatures for Antminer K5 ?

    0
    评论操作 固定链接

    For PCB board,the max temp is 80℃,for chip,the max temp is 105℃。

    1
    评论操作 固定链接

    Can I check psu temp remotely from the portal ?

    0
    评论操作 固定链接

    You wanna check psu temp? what is the purpose please?

    0
    评论操作 固定链接

    To be sure that everything going stable while I am away from the miner , what is the psu max temp should be ?

    0
    评论操作 固定链接

    The power should not exceed 1800W,and make sure the fans of the PSU keeps running,that will be OK.

    0
    评论操作 固定链接

    Can you also send me the image? I'm having network issues.

    0
    评论操作 固定链接

    Hello Lorenzo Boyice

    Leave me an email,please,thank you.

    0
    评论操作 固定链接

    I have the same problem, but the red and green light is not showing. Can you send me the SD file? das@sf-nett.no

    This is the last image before the machine didn’t boot 

    1
    评论操作 固定链接

    I changed the controll board with an S9k. Just need the system file

    0
    评论操作 固定链接

请先登录再写评论。