S19J Pro - ERROR_SOC_INIT: soc init failed!

评论

3 条评论

    From the kernel log, It shows that the hash board can not be detected. please kindly exclude the issue by following steps:
    1. Check the wires for the hashboard--pull them and re-plug them again, and also you can try to change the new wires.
    2. Please clean up the dust.
    How To Clean and Dust The ANTIMINERS
    https://support.bitmain.com/hc/en-us/articles/115004520173-How-To-Clean-and-Dust-The-Antminers
    3.Flashing SD card
    If there are still problems after the above steps, please send the latest kernel log and miner status.
    We will double-check for you.

    0
    评论操作 固定链接

    Dear Customer,
    If you have other questions please feel free to contact us.
    We recommend that you go to https://support.bitmain.com/hc/en-us, click Submit a request at the bottom of the website, and select the correct ticket type.
    We will reply to your question as soon as possible.

    0
    评论操作 固定链接

    Hello, i have exact same problem, tried to clean, switch cables, change PSU. If i disconnect hashboard, miner works well on remaining 2 ones. Also, i'm unable to find recovery image for Amlogic micro-USB board. Please send me this firmware to i4itoff@gmail.com, i'll try recovery procedure.

    0
    评论操作 固定链接

请先登录再写评论。