Missing hash board
My s19 pro says it is missing hashboard 0. here is the current log:
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209652K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19724K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090e410 (9242 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b3cda0 ( 244 kB)
.bss : 0xc0b3cda0 - 0xc0b77024 ( 233 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6652K (cd47b000 - cdafa000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 7/2, WL threshold: 4096, image sequence number: 935734478
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 0FB48C30-FE0D-4947-9C42-0B5FD145856A, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 2601875591
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID EF34087A-7AA1-45E0-A5FB-65CFDA417605, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Tue Nov 16 19:20:40 CST 2021 type: Antminer S19 Pro
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Tue Nov 16 19:20:40 CST 2021 type: Antminer S19 Pro
1970-01-01 00:00:10 commit version: 386747fa 2021-10-21 19:58:45, build by: jenkins 2021-11-16 19:37:57
1970-01-01 00:00:10 opt_multi_version = 1
1970-01-01 00:00:10 opt_bitmain_ab = 1
1970-01-01 00:00:10 mid_auto_gen = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBP1901 conf
1970-01-01 00:00:10 machine : NBP1901
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
1970-01-01 00:00:16 miner ID : 805c65242b104814
1970-01-01 00:00:16 FPGA Version = 0xB031
1970-01-01 00:00:16 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:16 ==========================capability start==========================
1970-01-01 00:00:16 board num = 3
1970-01-01 00:00:16 board id = 0, chain num = 1
1970-01-01 00:00:16 chain id = 0
1970-01-01 00:00:16 board id = 1, chain num = 1
1970-01-01 00:00:16 chain id = 1
1970-01-01 00:00:16 board id = 2, chain num = 1
1970-01-01 00:00:16 chain id = 2
1970-01-01 00:00:16 ==========================capability end============================
1970-01-01 00:00:16 chain num = 3
2022-04-22 19:20:14 [chain 0]
2022-04-22 19:20:14 0x0000 11 4A EC 95 5B A7 E8 60 4C 45 8E 44 B2 B2 B1 AC
2022-04-22 19:20:14 0x0010 5E 9E BF 51 1C 90 2E 2D 23 4D EA 6D 2B 62 95 AA
2022-04-22 19:20:14 0x0020 A6 96 1F 80 C5 EF 3A FD F7 D9 1E CC B9 1D 9E 0E
2022-04-22 19:20:14 0x0030 CF E7 0A 35 D9 E7 D4 31 AB 7E 6B 8E C3 10 E8 44
2022-04-22 19:20:14 0x0040 6C A7 EB 6D 6D 63 7B E6 71 48 FF FF FF FF FF FF
2022-04-22 19:20:14 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:14 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:14 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:14 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:14 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:14 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:14 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:14 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:14 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:14 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:14 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
2022-04-22 19:20:14
2022-04-22 19:20:16 [chain 1]
2022-04-22 19:20:16 0x0000 11 4A 47 24 D5 52 29 65 D9 76 93 19 9A 95 3E 0C
2022-04-22 19:20:16 0x0010 45 C4 83 90 39 BE AE FA E2 D1 D4 68 BB BC 8A 87
2022-04-22 19:20:16 0x0020 9A B6 26 0D 11 FD 72 1C A9 18 1A 45 63 A3 0E BA
2022-04-22 19:20:16 0x0030 26 44 54 F3 78 8A 2F C6 75 AC 15 0B 3C 95 26 CA
2022-04-22 19:20:16 0x0040 2D 1A 2A CC EC 8B D5 B8 A2 61 FF FF FF FF FF FF
2022-04-22 19:20:16 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:16 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:16 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:16 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:16 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:16 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:16 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:16 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:16 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:16 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:16 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
2022-04-22 19:20:16
2022-04-22 19:20:18 [chain 2]
2022-04-22 19:20:18 0x0000 11 4A 80 99 25 EF 1B 95 94 85 BC F0 47 D2 7D 99
2022-04-22 19:20:18 0x0010 74 EE 4F 19 61 C0 ED 8B 2E 70 F6 B2 A8 C4 D3 0C
2022-04-22 19:20:18 0x0020 D7 8B CA 48 A5 5A 96 9A AD 33 63 53 F1 EA 29 29
2022-04-22 19:20:18 0x0030 0E 9D 01 87 E6 F7 96 ED 8C D2 47 8E 8E 71 9D FE
2022-04-22 19:20:18 0x0040 89 92 B3 A4 18 DB E7 B2 18 18 FF FF FF FF FF FF
2022-04-22 19:20:18 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:18 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:18 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:18 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:18 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:18 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:18 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:18 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:18 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:18 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2022-04-22 19:20:18 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
2022-04-22 19:20:18
2022-04-22 19:20:18 fan_eft : 0 fan_pwm : 100
2022-04-22 19:20:18 create thread
2022-04-22 19:20:18 fixed working voltage = 1300
2022-04-22 19:20:18 Chain [0] PCB Version: 0x0100
2022-04-22 19:20:18 Chain [0] BOM Version: 0x0100
2022-04-22 19:20:18 Chain [1] PCB Version: 0x0100
2022-04-22 19:20:18 Chain [1] BOM Version: 0x0100
2022-04-22 19:20:18 Chain [2] PCB Version: 0x0100
2022-04-22 19:20:18 Chain [2] BOM Version: 0x0100
2022-04-22 19:20:22 Fan check passed.
2022-04-22 19:20:23 chain[0] PIC jump to app
2022-04-22 19:20:24 Check chain[0] PIC fw version=0x89
2022-04-22 19:20:25 chain[1] PIC jump to app
2022-04-22 19:20:27 Check chain[1] PIC fw version=0x89
2022-04-22 19:20:28 chain[2] PIC jump to app
2022-04-22 19:20:29 Check chain[2] PIC fw version=0x89
2022-04-22 19:20:30 create thread
2022-04-22 19:20:30 max sensor num = 4
2022-04-22 19:20:30 temperature_monitor_thread start...
2022-04-22 19:20:34 power type version: 0x0071
2022-04-22 19:20:34 Enter sleep to make sure power release finish.
2022-04-22 19:22:20 Slept 105 seconds, diff = 5.
2022-04-22 19:22:20 set_voltage_by_steps to 1500.
2022-04-22 19:22:25 start up min temp by 75a = 38
2022-04-22 19:22:25 set UART baud to 115200
2022-04-22 19:22:32 chain avg vol rise to 15.37
2022-04-22 19:22:33 Chain[0]: find 0 asic, times 0
2022-04-22 19:22:41 Chain[0]: find 0 asic, times 1
2022-04-22 19:22:49 Chain[0]: find 0 asic, times 2
2022-04-22 19:22:49 Chain 0 only find 0 asic, will power off hash board 0
2022-04-22 19:22:57 Chain[1]: find 114 asic, times 0
2022-04-22 19:23:05 Chain[2]: find 114 asic, times 0
2022-04-22 19:23:05 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 1
2022-04-22 19:23:08 min freq in eeprom = 525
2022-04-22 19:23:08 fixed frequency is 525
2022-04-22 19:23:08 Bring up temperature is 38
2022-04-22 19:23:08 set UART baud to 12000000
2022-04-22 19:23:08 set_voltage_by_steps to 1300.
2022-04-22 19:23:16 STATUS_INITED: soc init done!
2022-04-22 19:23:16 create thread
2022-04-22 19:23:16 create thread
2022-04-22 19:23:18 start to init...
2022-04-22 19:23:26 Init done!
2022-04-22 19:23:26 STATUS_OKAY
2022-04-22 19:23:26 start the cached job
2022-04-22 19:23:26 Version num 8
2022-04-22 19:23:26 Mask num 0xe000
2022-04-22 19:23:26 freq = 525, percent = 90, hcn = 12480, timeout = 449
2022-04-22 19:23:26 set_start_time_point total_tv_start_sys=211 total_tv_end_sys=212-
Dear customer.
From the kernel log, It shows that the hash board can not be detected. please kindly exclude the issue by following steps:
1. Check the wires for the hashboard--pull them and re-plug them again, and also you can try to change the new wires.
2. Please clean up the dust.
How To Clean and Dust The ANTIMINERS
https://support.bitmain.com/hc/en-us/articles/115004520173-How-To-Clean-and-Dust-The-Antminers
If there are still problems after the above steps, please send the latest kernel log and miner status.
We will double-check for you. -
Dear Customer,
In order to better solve the problem,
We recommend that you go to https://support.bitmain.com/hc/en-us, click Submit a request at the bottom of the website, and select the correct ticket type.
We will reply to your question as soon as possible. -
Hi Nick, I too seem to be having the same issue. I have emailed your support team though I got no response from them yet.
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.13+ (jenkins@nomd-nomd-fwc-bj) (gcc version 4.9.4 (Linaro GCC 4.9-2017.01) ) #27 SMP Thu Jun 10 12:15:30 CST 2021 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c05d9000, node_mem_map c0631000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 64768 pages, LIFO batch:15 [ 0.000000] AM335X ES1.0 (neon ) [ 0.000000] PERCPU: Embedded 8 pages/cpu @c083e000 s9856 r8192 d14720 u32768 [ 0.000000] pcpu-alloc: s9856 r8192 d14720 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768 [ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] allocated 524288 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 255MB = 255MB total [ 0.000000] Memory: 245444k/245444k available, 16700k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB) [ 0.000000] .text : 0xc0008000 - 0xc053f674 (5342 kB) [ 0.000000] .init : 0xc0540000 - 0xc0571680 ( 198 kB) [ 0.000000] .data : 0xc0572000 - 0xc05d9ee0 ( 416 kB) [ 0.000000] .bss : 0xc05d9ee0 - 0xc0630448 ( 346 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000348] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968) [ 0.015450] pid_max: default: 32768 minimum: 301 [ 0.015675] Security Framework initialized [ 0.015767] Mount-cache hash table entries: 512 [ 0.024278] Initializing cgroup subsys cpuacct [ 0.024309] Initializing cgroup subsys memory [ 0.024369] Initializing cgroup subsys blkio [ 0.024499] CPU: Testing write buffer coherency: ok [ 0.025002] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.025075] Setting up static identity map for 0x8030a500 - 0x8030a54c [ 0.026436] Brought up 1 CPUs [ 0.026458] SMP: Total of 1 processors activated (545.07 BogoMIPS). [ 0.027739] devtmpfs: initialized [ 0.091435] pinctrl core: initialized pinctrl subsystem [ 0.091684] rstctl core: initialized rstctl subsystem [ 0.092148] regulator-dummy: no parameters [ 0.092651] NET: Registered protocol family 16 [ 0.093308] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.102724] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle [ 0.102901] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.103946] platform 49000000.edma: alias fck already exists [ 0.103975] platform 49000000.edma: alias fck already exists [ 0.104001] platform 49000000.edma: alias fck already exists [ 0.105116] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.105342] OMAP GPIO hardware version 0.1 [ 0.106681] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.107985] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.109447] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.109969] of_get_named_gpio_flags exited with status 52 [ 0.109998] gpio-rctrl rstctl.3: loaded OK [ 0.114861] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.118109] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.120008] cpsw.0: No hwaddr in dt. Using c4:f3:12:72:1c:2a from efuse [ 0.128872] bio: create slab <bio-0> at 0 [ 0.140299] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.140586] of_get_named_gpio_flags: can't parse gpios property [ 0.140813] vmmcsd_fixed: 3300 mV [ 0.143919] SCSI subsystem initialized [ 0.145151] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz [ 0.145184] omap_i2c 4819c000.i2c: unable to select pin group [ 0.145414] pps_core: LinuxPPS API ver. 1 registered [ 0.145430] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.147010] Switching to clocksource gp_timer [ 0.164229] NET: Registered protocol family 2 [ 0.165283] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.165372] TCP bind hash table entries: 2048 (order: 3, 40960 bytes) [ 0.165466] TCP: Hash tables configured (established 2048 bind 2048) [ 0.165556] TCP: reno registered [ 0.165582] UDP hash table entries: 256 (order: 1, 12288 bytes) [ 0.165626] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) [ 0.166036] NET: Registered protocol family 1 [ 0.166602] RPC: Registered named UNIX socket transport module. [ 0.166676] RPC: Registered udp transport module. [ 0.166692] RPC: Registered tcp transport module. [ 0.166705] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.167085] Trying to unpack rootfs image as initramfs... [ 1.056130] Freeing initrd memory: 6452K [ 1.056770] CPU PMU: probing PMU on CPU 0 [ 1.056803] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 1.057411] omap2_mbox_probe: platform not supported [ 1.061050] VFS: Disk quotas dquot_6.5.2 [ 1.061365] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.062668] NFS: Registering the id_resolver key type [ 1.062769] Key type id_resolver registered [ 1.062785] Key type id_legacy registered [ 1.062850] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.063358] msgmni has been set to 491 [ 1.066112] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.066137] io scheduler noop registered [ 1.066153] io scheduler deadline registered [ 1.066208] io scheduler cfq registered (default) [ 1.069923] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.072215] omap_uart 44e09000.serial: did not get pins for uart0 error: -19 [ 1.072241] of_get_named_gpio_flags: can't parse gpios property [ 1.072516] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0 [ 1.693582] console [ttyO0] enabled [ 1.697911] of_get_named_gpio_flags: can't parse gpios property [ 1.698162] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1 [ 1.706569] of_get_named_gpio_flags: can't parse gpios property [ 1.706785] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2 [ 1.715174] of_get_named_gpio_flags: can't parse gpios property [ 1.715384] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4 [ 1.723811] of_get_named_gpio_flags: can't parse gpios property [ 1.724030] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5 [ 1.745950] brd: module loaded [ 1.756181] loop: module loaded [ 1.760224] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node [ 1.770351] ONFI param page 0 valid [ 1.774057] ONFI flash detected [ 1.777378] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64 [ 1.789304] omap2-nand: detected x8 NAND flash [ 1.793972] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme [ 1.799558] omap2-nand: using custom ecc layout [ 1.804407] 12 ofpart partitions found on MTD device omap2-nand.0 [ 1.810807] Creating 12 MTD partitions on "omap2-nand.0": [ 1.816489] 0x000000000000-0x000000020000 : "spl" [ 1.823188] 0x000000020000-0x000000040000 : "spl_backup1" [ 1.830468] 0x000000040000-0x000000060000 : "spl_backup2" [ 1.837822] 0x000000060000-0x000000080000 : "spl_backup3" [ 1.845148] 0x000000080000-0x000000240000 : "u-boot" [ 1.853469] 0x000000240000-0x000000260000 : "bootenv" [ 1.860479] 0x000000260000-0x000000280000 : "fdt" [ 1.867102] 0x000000280000-0x000000780000 : "kernel" [ 1.878105] 0x000000800000-0x000001c00000 : "root" [ 1.901810] 0x000001c00000-0x000001e00000 : "config" [ 1.910228] 0x000001e00000-0x000002000000 : "sig" [ 1.918415] 0x000002000000-0x000008000000 : "nvdata" [ 2.007882] OneNAND driver initializing [ 2.014346] mousedev: PS/2 mouse device common for all mice [ 2.021992] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 2.029503] 44e3e000.rtc: already running [ 2.034035] i2c /dev entries driver [ 2.038359] pps_ldisc: PPS line discipline registered [ 2.043853] Driver for 1-wire Dallas network protocol. [ 2.051103] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.058691] cpuidle: using governor ladder [ 2.063019] cpuidle: using governor menu [ 2.067596] of_get_named_gpio_flags exited with status 6 [ 2.067615] of_get_named_gpio_flags: can't parse gpios property [ 2.067629] of_get_named_gpio_flags: can't parse gpios property [ 2.067664] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed [ 2.074898] omap_hsmmc mmc.4: Failed to get rstctl; not using any [ 2.081705] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25 [ 2.088928] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24 [ 2.096254] mmc.4 supply vmmc_aux not found, using dummy regulator [ 2.103225] omap_hsmmc mmc.4: pins are not configured from the driver [ 2.137945] of_get_named_gpio_flags exited with status -517 [ 2.138011] platform gpio-leds.7: Driver leds-gpio requests probe deferral [ 2.145801] ledtrig-cpu: registered to indicate activity on CPUs [ 2.152575] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36 [ 2.159771] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 2.167830] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 2.174112] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5 [ 2.181290] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6 [ 2.189602] nf_conntrack version 0.5.0 (3935 buckets, 15740 max) [ 2.197089] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.202868] TCP: cubic registered [ 2.206410] Initializing XFRM netlink socket [ 2.211047] NET: Registered protocol family 10 [ 2.217143] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.223103] NET: Registered protocol family 17 [ 2.227879] NET: Registered protocol family 15 [ 2.232705] Key type dns_resolver registered [ 2.237285] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 2.245367] ThumbEE CPU extension supported. [ 2.249884] Registering SWP/SWPB emulation handler [ 2.256003] registered taskstats version 1 [ 2.261773] of_get_named_gpio_flags exited with status -517 [ 2.261842] platform gpio-leds.7: Driver leds-gpio requests probe deferral [ 2.319043] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.325459] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.340248] libphy: 4a101000.mdio: probed [ 2.344598] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.354683] of_get_named_gpio_flags exited with status -517 [ 2.354748] platform gpio-leds.7: Driver leds-gpio requests probe deferral [ 2.362234] Detected MACID = c4:f3:12:72:1c:2a [ 2.366912] cpsw 4a100000.ethernet: NAPI disabled [ 2.373896] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.383077] cpu0 supply cpu0 not found, using dummy regulator [ 2.389564] cpufreq_cpu0: failed to scale voltage up: -22 [ 2.395386] cpufreq_cpu0: failed to scale voltage up: -22 [ 2.409099] Freeing init memory: 196K [ 2.489842] devpts: called with bogus options [ 2.988238] jffs2: notice: (109) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 5.275214] jffs2: notice: (115) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 5.798219] net eth0: initializing cpsw version 1.12 (0) [ 5.808624] net eth0: phy found : id is : 0x7c0f1 [ 5.821014] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.883988] libphy: 4a101000.mdio:00 - Link is Up - 100/Full [ 8.890188] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.392286] register uart_trans chrdev success. [ 11.397737] tty port open success [/dev/ttyO1]! [ 11.403020] init sucess for tty struct (249:1) [/dev/ttyO1] [ 11.410012] tty port open success [/dev/ttyO2]! [ 11.415012] init sucess for tty struct (249:2) [/dev/ttyO2] [ 11.421392] tty port open success [/dev/ttyO4]! [ 11.426366] init sucess for tty struct (249:4) [/dev/ttyO4] [ 11.432792] tty port open success [/dev/ttyO5]! [ 11.438873] init sucess for tty struct (249:5) [/dev/ttyO5] [ 19.821144] uart trans dev open. [ 19.824895] uart_buf virt addr = 0xccd80000 [ 19.829453] uart_buf phys addr = 0x8cd80000 [ 19.833976] uart_buf pfn = 0x0008cd80 [ 19.839251] uart trans stop send work timer. [ 19.844208] uart trans set chain exist bits:0x7. [ 19.849287] uart trans set work queue count 768. [ 124.040205] uart set baud to: 4098 [ 124.044514] uart set baud to: 4098 [ 124.048348] uart set baud to: 4098 [ 185.641518] uart set baud to: 4109 [ 185.706824] uart set baud to: 4109 [ 418.000271] uart trans start send work timer. ===========================================Miner log=========================================== 2000-01-01 00:00:09 Miner compile time: Thu Jun 10 12:23:16 CST 2021 type: Antminer S19j Pro 2000-01-01 00:00:10 This is fix-freq version 2000-01-01 00:00:10 Miner compile time: Thu Jun 10 12:23:16 CST 2021 type: Antminer S19j Pro 2000-01-01 00:00:10 commit åversion: f579494 2021-06-09 09:22:32, build by: jenkins 2021-06-10 12:37:05 2000-01-01 00:00:10 opt_multi_version = 1 2000-01-01 00:00:10 opt_bitmain_ab = 1 2000-01-01 00:00:10 mid_auto_gen = 1 2000-01-01 00:00:10 opt_bitmain_work_mode = 0 2000-01-01 00:00:10 port 51 already exported 2000-01-01 00:00:10 port 49 already exported 2000-01-01 00:00:10 port 48 already exported 2000-01-01 00:00:10 port 60 already exported 2000-01-01 00:00:10 port 47 already exported 2000-01-01 00:00:10 port 27 already exported 2000-01-01 00:00:10 port 44 already exported 2000-01-01 00:00:10 port 22 already exported 2000-01-01 00:00:10 no board pluged in socket 44 2000-01-01 00:00:10 port 23 already exported 2000-01-01 00:00:10 port 45 already exported 2000-01-01 00:00:10 port 46 already exported 2000-01-01 00:00:10 port 26 already exported 2000-01-01 00:00:10 Note: front fan is power on! 2000-01-01 00:00:10 Note: rear fan is power on! 2000-01-01 00:00:10 start the http log. 2000-01-01 00:00:10 httpListenThread start ret=0 2000-01-01 00:00:10 start listen on 6060 ... 2000-01-01 00:00:10 load machine BHB42601 conf 2000-01-01 00:00:10 machine : BHB42601 2000-01-01 00:00:10 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3 2000-01-01 00:00:15 ==========================capability start========================== 2000-01-01 00:00:15 board num = 3 2000-01-01 00:00:15 board id = 0, chain num = 1 2000-01-01 00:00:15 chain id = 0 2000-01-01 00:00:15 board id = 1, chain num = 1 2000-01-01 00:00:15 chain id = 1 2000-01-01 00:00:15 board id = 2, chain num = 1 2000-01-01 00:00:15 chain id = 2 2000-01-01 00:00:15 ==========================capability end============================ 2000-01-01 00:00:15 chain num = 3 2000-01-01 00:00:16 load chain 0 eeprom data 2000-01-01 00:00:16 board_info_version = 4 2000-01-01 00:00:16 algorithm_and_key_version = 0x11 2000-01-01 00:00:16 board_sn = FXDZYN3BAJGJB16P1 2000-01-01 00:00:16 chip_die = ED 2000-01-01 00:00:16 chip_marking = S1C021BB18 2000-01-01 00:00:16 chip_bin = 3 2000-01-01 00:00:16 ft_version = F1V04B2C1 2000-01-01 00:00:16 pcb_version = 0x110 2000-01-01 00:00:16 bom_version = 0x20 2000-01-01 00:00:16 asic_sensor_type = 0x0 2000-01-01 00:00:16 asic_sensor_addr[0] = 0x0 2000-01-01 00:00:16 asic_sensor_addr[1] = 0x0 2000-01-01 00:00:16 asic_sensor_addr[2] = 0x0 2000-01-01 00:00:16 asic_sensor_addr[3] = 0x0 2000-01-01 00:00:16 pic_sensor_type = 0x8b 2000-01-01 00:00:16 pic_sensor_addr = 0xf 2000-01-01 00:00:16 chip_tech = AA 2000-01-01 00:00:16 board_name = BHB42601 2000-01-01 00:00:16 factory_job = FXDZ20210701001-ZB 2000-01-01 00:00:16 board_info_crc = 0xc 2000-01-01 00:00:16 voltage = 1360 2000-01-01 00:00:16 frequency = 545 2000-01-01 00:00:16 nonce_rate = 9976 2000-01-01 00:00:16 pcb_temp_in = 33 2000-01-01 00:00:16 pcb_temp_out = 33 2000-01-01 00:00:16 test_version = 1 2000-01-01 00:00:16 test_standard = 0 2000-01-01 00:00:16 param_info_crc = 0x13 2000-01-01 00:00:16 pt1_result = 1 2000-01-01 00:00:16 pt1_count = 1 2000-01-01 00:00:16 pt2_result = 1 2000-01-01 00:00:16 pt2_count = 1 2000-01-01 00:00:17 load chain 1 eeprom data 2000-01-01 00:00:17 board_info_version = 4 2000-01-01 00:00:17 algorithm_and_key_version = 0x11 2000-01-01 00:00:17 board_sn = FXDZYN3BAJGJB16P6 2000-01-01 00:00:17 chip_die = ED 2000-01-01 00:00:17 chip_marking = S1C021BB18 2000-01-01 00:00:17 chip_bin = 3 2000-01-01 00:00:17 ft_version = F1V04B2C1 2000-01-01 00:00:17 pcb_version = 0x110 2000-01-01 00:00:17 bom_version = 0x20 2000-01-01 00:00:17 asic_sensor_type = 0x0 2000-01-01 00:00:17 asic_sensor_addr[0] = 0x0 2000-01-01 00:00:17 asic_sensor_addr[1] = 0x0 2000-01-01 00:00:17 asic_sensor_addr[2] = 0x0 2000-01-01 00:00:17 asic_sensor_addr[3] = 0x0 2000-01-01 00:00:17 pic_sensor_type = 0x8b 2000-01-01 00:00:17 pic_sensor_addr = 0xf 2000-01-01 00:00:17 chip_tech = AA 2000-01-01 00:00:17 board_name = BHB42601 2000-01-01 00:00:17 factory_job = FXDZ20210701001-ZB 2000-01-01 00:00:17 board_info_crc = 0x0 2000-01-01 00:00:17 voltage = 1360 2000-01-01 00:00:17 frequency = 545 2000-01-01 00:00:17 nonce_rate = 9981 2000-01-01 00:00:17 pcb_temp_in = 34 2000-01-01 00:00:17 pcb_temp_out = 35 2000-01-01 00:00:17 test_version = 1 2000-01-01 00:00:17 test_standard = 0 2000-01-01 00:00:17 param_info_crc = 0x1d 2000-01-01 00:00:17 pt1_result = 1 2000-01-01 00:00:17 pt1_count = 1 2000-01-01 00:00:17 pt2_result = 1 2000-01-01 00:00:17 pt2_count = 1 2000-01-01 00:00:17 load chain 2 eeprom data 2000-01-01 00:00:17 board_info_version = 4 2000-01-01 00:00:17 algorithm_and_key_version = 0x11 2000-01-01 00:00:17 board_sn = FXDZYN3BAJGJB15TS 2000-01-01 00:00:17 chip_die = ED 2000-01-01 00:00:17 chip_marking = T1CH21BH61 2000-01-01 00:00:17 chip_bin = 3 2000-01-01 00:00:17 ft_version = F1V04B2C1 2000-01-01 00:00:17 pcb_version = 0x110 2000-01-01 00:00:17 bom_version = 0x20 2000-01-01 00:00:17 asic_sensor_type = 0x0 2000-01-01 00:00:17 asic_sensor_addr[0] = 0x0 2000-01-01 00:00:17 asic_sensor_addr[1] = 0x0 2000-01-01 00:00:17 asic_sensor_addr[2] = 0x0 2000-01-01 00:00:17 asic_sensor_addr[3] = 0x0 2000-01-01 00:00:17 pic_sensor_type = 0x8b 2000-01-01 00:00:17 pic_sensor_addr = 0xf 2000-01-01 00:00:17 chip_tech = AA 2000-01-01 00:00:17 board_name = BHB42601 2000-01-01 00:00:17 factory_job = FXDZ20210701001-ZB 2000-01-01 00:00:17 board_info_crc = 0x6 2000-01-01 00:00:17 voltage = 1360 2000-01-01 00:00:17 frequency = 545 2000-01-01 00:00:17 nonce_rate = 9996 2000-01-01 00:00:17 pcb_temp_in = 34 2000-01-01 00:00:17 pcb_temp_out = 34 2000-01-01 00:00:17 test_version = 1 2000-01-01 00:00:17 test_standard = 0 2000-01-01 00:00:17 param_info_crc = 0x19 2000-01-01 00:00:17 pt1_result = 1 2000-01-01 00:00:17 pt1_count = 1 2000-01-01 00:00:17 pt2_result = 1 2000-01-01 00:00:17 pt2_count = 1 2000-01-01 00:00:17 fan_eft : 0 fan_pwm : 100 2000-01-01 00:00:17 create thread get_nonce_and_register_thread 2000-01-01 00:00:17 fixed working voltage = 1360 2000-01-01 00:00:17 Chain [0] PCB Version: 0x0110 2000-01-01 00:00:17 Chain [0] BOM Version: 0x0020 2000-01-01 00:00:17 Chain [1] PCB Version: 0x0110 2000-01-01 00:00:17 Chain [1] BOM Version: 0x0020 2000-01-01 00:00:17 Chain [2] PCB Version: 0x0110 2000-01-01 00:00:17 Chain [2] BOM Version: 0x0020 2000-01-01 00:00:17 Fan check passed. 2000-01-01 00:00:17 uart_trans addr:0xb6c89000. 2022-06-02 16:52:40 chain[0] PIC jump to app 2022-06-02 16:52:41 Check chain[0] PIC fw version=0x89 2022-06-02 16:52:43 chain[1] PIC jump to app 2022-06-02 16:52:44 Check chain[1] PIC fw version=0x89 2022-06-02 16:52:45 chain[2] PIC jump to app 2022-06-02 16:52:46 Check chain[2] PIC fw version=0x89 2022-06-02 16:52:47 create thread pic_heart_beat_thread 2022-06-02 16:52:47 max sensor num = 4 2022-06-02 16:52:47 i2c_sim_init start 2022-06-02 16:52:47 temperature_monitor_thread start... 2022-06-02 16:52:47 i2c_sim_init end 2022-06-02 16:52:48 power open power_version = 0x71 2022-06-02 16:52:49 power type version: 0x0071 2022-06-02 16:52:49 Enter sleep to make sure power release finish. 2022-06-02 16:53:01 chain avg vol drop to 0.96 2022-06-02 16:54:17 Slept 87 seconds, diff = 5. 2022-06-02 16:54:18 set_voltage_by_steps to 1500. 2022-06-02 16:54:23 start up min temp by 75a = 31 2022-06-02 16:54:25 chain avg vol rise to 14.69 2022-06-02 16:54:33 Chain[0]: find 126 asic, times 0 2022-06-02 16:54:43 Chain[1]: find 126 asic, times 0 2022-06-02 16:54:53 Chain[2]: find 0 asic, times 0 2022-06-02 16:55:04 Chain[2]: find 0 asic, times 1 2022-06-02 16:55:15 Chain[2]: find 0 asic, times 2 2022-06-02 16:55:17 Chain 2 only find 0 asic, will power off hash board 2 2022-06-02 16:55:22 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1 2022-06-02 16:55:25 min freq in eeprom = 545 2022-06-02 16:55:25 fixed frequency is 545 2022-06-02 16:55:25 Bring up temperature is 32 2022-06-02 16:55:25 set UART baud to 3000000 2022-06-02 16:55:25 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1 2022-06-02 16:55:25 start do_core_reset 2022-06-02 16:55:38 end do_core_reset 2022-06-02 16:55:38 STATUS_INITED: soc init done! 2022-06-02 16:55:38 create thread check_miner_status_thread 2022-06-02 16:55:38 create thread check_system_work_thread 2022-06-02 16:59:02 reload pool, need recalculate 2022-06-02 16:59:02 set_start_time_point total_tv_start_sys=403 total_tv_end_sys=404 2022-06-02 16:59:03 start to init... 2022-06-02 16:59:03 set_voltage_by_steps to 1450. 2022-06-02 16:59:05 power reply the bad crc, crc = 0x00ba, crc_read = 0xba7f 2022-06-02 16:59:05 read_back_data[0] = 0x55 2022-06-02 16:59:05 read_back_data[1] = 0xaa 2022-06-02 16:59:05 read_back_data[2] = 0x06 2022-06-02 16:59:05 read_back_data[3] = 0x83 2022-06-02 16:59:05 read_back_data[4] = 0x31 2022-06-02 16:59:05 read_back_data[5] = 0x00 2022-06-02 16:59:05 read_back_data[6] = 0x7f 2022-06-02 16:59:05 read_back_data[7] = 0xba 2022-06-02 16:59:07 fixed step freq_start = 50, freq_end = 545, freq_step = 6.25 2022-06-02 16:59:07 chain = 0 set freq to 56.25 2022-06-02 16:59:07 chain = 1 set freq to 56.25 2022-06-02 16:59:07 chain = 0 set freq to 62.50 2022-06-02 16:59:07 chain = 1 set freq to 62.50 2022-06-02 16:59:07 chain = 0 set freq to 68.75 2022-06-02 16:59:07 chain = 1 set freq to 68.75 2022-06-02 16:59:07 chain = 0 set freq to 75.00 2022-06-02 16:59:07 chain = 1 set freq to 75.00 2022-06-02 16:59:07 chain = 0 set freq to 81.25 2022-06-02 16:59:07 chain = 1 set freq to 81.25 2022-06-02 16:59:07 chain = 0 set freq to 87.50 2022-06-02 16:59:07 chain = 1 set freq to 87.50 2022-06-02 16:59:07 chain = 0 set freq to 93.75 2022-06-02 16:59:07 chain = 1 set freq to 93.75 2022-06-02 16:59:07 chain = 0 set freq to 100.00 2022-06-02 16:59:07 chain = 1 set freq to 100.00 2022-06-02 16:59:07 chain = 0 set freq to 106.25 2022-06-02 16:59:07 chain = 1 set freq to 106.25 2022-06-02 16:59:08 chain = 0 set freq to 112.50 2022-06-02 16:59:08 chain = 1 set freq to 112.50 2022-06-02 16:59:08 chain = 0 set freq to 118.75 2022-06-02 16:59:08 chain = 1 set freq to 118.75 2022-06-02 16:59:08 chain = 0 set freq to 125.00 2022-06-02 16:59:08 chain = 1 set freq to 125.00 2022-06-02 16:59:08 chain = 0 set freq to 131.25 2022-06-02 16:59:08 chain = 1 set freq to 131.25 2022-06-02 16:59:08 chain = 0 set freq to 137.50 2022-06-02 16:59:08 chain = 1 set freq to 137.50 2022-06-02 16:59:08 chain = 0 set freq to 143.75 2022-06-02 16:59:08 chain = 1 set freq to 143.75 2022-06-02 16:59:08 chain = 0 set freq to 150.00 2022-06-02 16:59:08 chain = 1 set freq to 150.00 2022-06-02 16:59:08 chain = 0 set freq to 156.25 2022-06-02 16:59:08 chain = 1 set freq to 156.25 2022-06-02 16:59:08 chain = 0 set freq to 162.50 2022-06-02 16:59:08 chain = 1 set freq to 162.50 2022-06-02 16:59:08 chain = 0 set freq to 168.75 2022-06-02 16:59:08 chain = 1 set freq to 168.75 2022-06-02 16:59:09 chain = 0 set freq to 175.00 2022-06-02 16:59:09 chain = 1 set freq to 175.00 2022-06-02 16:59:09 chain = 0 set freq to 181.25 2022-06-02 16:59:09 chain = 1 set freq to 181.25 2022-06-02 16:59:09 chain = 0 set freq to 187.50 2022-06-02 16:59:09 chain = 1 set freq to 187.50 2022-06-02 16:59:09 chain = 0 set freq to 193.75 2022-06-02 16:59:09 chain = 1 set freq to 193.75 2022-06-02 16:59:09 chain = 0 set freq to 200.00 2022-06-02 16:59:09 chain = 1 set freq to 200.00 2022-06-02 16:59:09 chain = 0 set freq to 206.25 2022-06-02 16:59:09 chain = 1 set freq to 206.25 2022-06-02 16:59:09 chain = 0 set freq to 212.50 2022-06-02 16:59:09 chain = 1 set freq to 212.50 2022-06-02 16:59:09 chain = 0 set freq to 218.75 2022-06-02 16:59:09 chain = 1 set freq to 218.75 2022-06-02 16:59:09 chain = 0 set freq to 225.00 2022-06-02 16:59:09 chain = 1 set freq to 225.00 2022-06-02 16:59:10 chain = 0 set freq to 231.25 2022-06-02 16:59:10 chain = 1 set freq to 231.25 2022-06-02 16:59:10 chain = 0 set freq to 237.50 2022-06-02 16:59:10 chain = 1 set freq to 237.50 2022-06-02 16:59:10 chain = 0 set freq to 243.75 2022-06-02 16:59:10 chain = 1 set freq to 243.75 2022-06-02 16:59:10 chain = 0 set freq to 250.00 2022-06-02 16:59:10 chain = 1 set freq to 250.00 2022-06-02 16:59:10 chain = 0 set freq to 256.25 2022-06-02 16:59:10 chain = 1 set freq to 256.25 2022-06-02 16:59:10 chain = 0 set freq to 262.50 2022-06-02 16:59:10 chain = 1 set freq to 262.50 2022-06-02 16:59:10 chain = 0 set freq to 268.75 2022-06-02 16:59:10 chain = 1 set freq to 268.75 2022-06-02 16:59:10 chain = 0 set freq to 275.00 2022-06-02 16:59:10 chain = 1 set freq to 275.00 2022-06-02 16:59:10 chain = 0 set freq to 281.25 2022-06-02 16:59:10 chain = 1 set freq to 281.25 2022-06-02 16:59:10 chain = 0 set freq to 287.50 2022-06-02 16:59:10 chain = 1 set freq to 287.50 2022-06-02 16:59:11 chain = 0 set freq to 293.75 2022-06-02 16:59:11 chain = 1 set freq to 293.75 2022-06-02 16:59:11 chain = 0 set freq to 300.00 2022-06-02 16:59:11 chain = 1 set freq to 300.00 2022-06-02 16:59:11 chain = 0 set freq to 306.25 2022-06-02 16:59:11 chain = 1 set freq to 306.25 2022-06-02 16:59:11 chain = 0 set freq to 312.50 2022-06-02 16:59:11 chain = 1 set freq to 312.50 2022-06-02 16:59:11 chain = 0 set freq to 318.75 2022-06-02 16:59:11 chain = 1 set freq to 318.75 2022-06-02 16:59:11 chain = 0 set freq to 325.00 2022-06-02 16:59:11 chain = 1 set freq to 325.00 2022-06-02 16:59:11 chain = 0 set freq to 331.25 2022-06-02 16:59:11 chain = 1 set freq to 331.25 2022-06-02 16:59:11 chain = 0 set freq to 337.50 2022-06-02 16:59:11 chain = 1 set freq to 337.50 2022-06-02 16:59:11 chain = 0 set freq to 343.75 2022-06-02 16:59:11 chain = 1 set freq to 343.75 2022-06-02 16:59:11 chain = 0 set freq to 350.00 2022-06-02 16:59:11 chain = 1 set freq to 350.00 2022-06-02 16:59:12 chain = 0 set freq to 356.25 2022-06-02 16:59:12 chain = 1 set freq to 356.25 2022-06-02 16:59:12 chain = 0 set freq to 362.50 2022-06-02 16:59:12 chain = 1 set freq to 362.50 2022-06-02 16:59:12 chain = 0 set freq to 368.75 2022-06-02 16:59:12 chain = 1 set freq to 368.75 2022-06-02 16:59:12 chain = 0 set freq to 375.00 2022-06-02 16:59:12 chain = 1 set freq to 375.00 2022-06-02 16:59:12 chain = 0 set freq to 381.25 2022-06-02 16:59:12 chain = 1 set freq to 381.25 2022-06-02 16:59:12 chain = 0 set freq to 387.50 2022-06-02 16:59:12 chain = 1 set freq to 387.50 2022-06-02 16:59:12 chain = 0 set freq to 393.75 2022-06-02 16:59:12 chain = 1 set freq to 393.75 2022-06-02 16:59:12 chain = 0 set freq to 400.00 2022-06-02 16:59:12 chain = 1 set freq to 400.00 2022-06-02 16:59:12 chain = 0 set freq to 406.25 2022-06-02 16:59:12 chain = 1 set freq to 406.25 2022-06-02 16:59:12 chain = 0 set freq to 412.50 2022-06-02 16:59:12 chain = 1 set freq to 412.50 2022-06-02 16:59:13 chain = 0 set freq to 418.75 2022-06-02 16:59:13 chain = 1 set freq to 418.75 2022-06-02 16:59:13 chain = 0 set freq to 425.00 2022-06-02 16:59:13 chain = 1 set freq to 425.00 2022-06-02 16:59:13 chain = 0 set freq to 431.25 2022-06-02 16:59:13 chain = 1 set freq to 431.25 2022-06-02 16:59:13 chain = 0 set freq to 437.50 2022-06-02 16:59:13 chain = 1 set freq to 437.50 2022-06-02 16:59:13 chain = 0 set freq to 443.75 2022-06-02 16:59:13 chain = 1 set freq to 443.75 2022-06-02 16:59:13 chain = 0 set freq to 450.00 2022-06-02 16:59:13 chain = 1 set freq to 450.00 2022-06-02 16:59:13 chain = 0 set freq to 456.25 2022-06-02 16:59:13 chain = 1 set freq to 456.25 2022-06-02 16:59:13 chain = 0 set freq to 462.50 2022-06-02 16:59:13 chain = 1 set freq to 462.50 2022-06-02 16:59:13 chain = 0 set freq to 468.75 2022-06-02 16:59:13 chain = 1 set freq to 468.75 2022-06-02 16:59:14 chain = 0 set freq to 475.00 2022-06-02 16:59:14 chain = 1 set freq to 475.00 2022-06-02 16:59:14 chain = 0 set freq to 481.25 2022-06-02 16:59:14 chain = 1 set freq to 481.25 2022-06-02 16:59:14 chain = 0 set freq to 487.50 2022-06-02 16:59:14 chain = 1 set freq to 487.50 2022-06-02 16:59:14 chain = 0 set freq to 493.75 2022-06-02 16:59:14 chain = 1 set freq to 493.75 2022-06-02 16:59:14 chain = 0 set freq to 500.00 2022-06-02 16:59:14 chain = 1 set freq to 500.00 2022-06-02 16:59:14 chain = 0 set freq to 506.25 2022-06-02 16:59:14 chain = 1 set freq to 506.25 2022-06-02 16:59:14 chain = 0 set freq to 512.50 2022-06-02 16:59:14 chain = 1 set freq to 512.50 2022-06-02 16:59:14 chain = 0 set freq to 518.75 2022-06-02 16:59:14 chain = 1 set freq to 518.75 2022-06-02 16:59:14 chain = 0 set freq to 525.00 2022-06-02 16:59:14 chain = 1 set freq to 525.00 2022-06-02 16:59:14 chain = 0 set freq to 531.25 2022-06-02 16:59:14 chain = 1 set freq to 531.25 2022-06-02 16:59:15 chain = 0 set freq to 537.50 2022-06-02 16:59:15 chain = 1 set freq to 537.50 2022-06-02 16:59:15 chain = 0 set freq to 543.75 2022-06-02 16:59:15 chain = 1 set freq to 543.75 2022-06-02 16:59:15 chain = 0 set freq to 545.00 2022-06-02 16:59:15 chain = 1 set freq to 545.00 2022-06-02 16:59:15 set_voltage_by_steps to 1360. 2022-06-02 16:59:17 Init done! 2022-06-02 16:59:17 STATUS_OKAY 2022-06-02 16:59:17 start the cached job 2022-06-02 16:59:17 Version num 65536 2022-06-02 16:59:17 Mask num 0x1fffe000 2022-06-02 16:59:17 opt_multi_version = 65536, interval timeout = 2837042 2022-06-02 16:59:17 freq = 545, percent = 90, hcn = 4809, timeout = 2837042 2022-06-02 16:59:17 set_start_time_point total_tv_start_sys=419 total_tv_end_sys=420 2022-06-02 17:25:40 30m avg rate is 70624.35 in 26 mins 2022-06-02 17:55:44 30m avg rate is 70909.05 in 30 mins 2022-06-02 18:25:47 30m avg rate is 70566.33 in 30 mins 2022-06-02 18:55:50 30m avg rate is 70798.43 in 30 mins 2022-06-02 19:25:54 30m avg rate is 70489.49 in 30 mins 2022-06-02 19:55:58 30m avg rate is 70374.84 in 30 mins 2022-06-02 20:26:01 30m avg rate is 70516.32 in 30 mins 2022-06-02 20:56:05 30m avg rate is 70529.65 in 30 mins 2022-06-02 21:26:08 30m avg rate is 70594.99 in 30 mins 2022-06-02 21:56:12 30m avg rate is 70789.29 in 30 mins 2022-06-02 22:26:15 30m avg rate is 70401.06 in 30 mins 2022-06-02 22:56:18 30m avg rate is 70210.28 in 30 mins 2022-06-02 23:26:22 30m avg rate is 70828.55 in 30 mins 2022-06-02 23:56:25 30m avg rate is 71062.72 in 30 mins 2022-06-03 00:26:29 30m avg rate is 70549.15 in 30 mins 2022-06-03 00:56:32 30m avg rate is 70563.89 in 30 mins 2022-06-03 01:26:36 30m avg rate is 70730.78 in 30 mins 2022-06-03 01:56:39 30m avg rate is 70748.05 in 30 mins 2022-06-03 02:26:43 30m avg rate is 70647.89 in 30 mins 2022-06-03 02:56:46 30m avg rate is 70594.38 in 30 mins 2022-06-03 03:26:49 30m avg rate is 70594.25 in 30 mins 2022-06-03 03:56:53 30m avg rate is 70260.81 in 30 mins 2022-06-03 04:26:56 30m avg rate is 70855.99 in 30 mins 2022-06-03 04:57:00 30m avg rate is 70364.48 in 30 mins 2022-06-03 05:27:03 30m avg rate is 70591.94 in 30 mins 2022-06-03 05:57:07 30m avg rate is 70900.82 in 30 mins 2022-06-03 06:27:10 30m avg rate is 70651.70 in 30 mins 2022-06-03 06:57:14 30m avg rate is 70353.51 in 30 mins 2022-06-03 07:27:17 30m avg rate is 70485.83 in 30 mins 2022-06-03 07:57:21 30m avg rate is 70762.47 in 30 mins 2022-06-03 08:27:24 30m avg rate is 70612.06 in 30 mins 2022-06-03 08:57:27 30m avg rate is 70265.74 in 30 mins 2022-06-03 09:27:31 30m avg rate is 70750.49 in 30 mins 2022-06-03 09:57:35 30m avg rate is 70554.64 in 30 mins 2022-06-03 10:27:38 30m avg rate is 70228.48 in 30 mins 2022-06-03 10:57:42 30m avg rate is 70510.75 in 30 mins
请先登录再写评论。
评论
3 条评论