Replacing the power supply s19 90th

A power supply failed on the miner s19 90th. Please tell me which power supply is suitable for model C19 90th?
Do all the blocks APW12 fit or do they somehow differ? The fact is that we tried 3 new different power supplies and not one did not earn. Maybe you have an instruction for replacing the power supply? After just a replacement and reset to the factory settings, we received the message of mainer "stop_mining: get power type version failed". After replacing the block and flashing the checkpoint received the message" "ERROR_TEMP_TOO_HIGH: over max temp " "stop_mining: over max temp"
Will such a power supply work ?:
https://aliexpress.ru/item/1005003349908291.html?spm=a2g0o.search0302.0.0.2f9e2929DzDYHu&algo_pvid=141d4f34-04f0-44cc-8244-261da05e7c76&algo_expid=141d4f34-04f0-44cc-8244-261da05e7c76-3&btsid=0b8b15c416438594792591487e7f7e&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

正式评论

Linda

2022年02月14日 06:30

Hi, it's APW12, with voltage 12v-15v

breon

2022年02月18日 13:08

What type of power supply did you change to?

Kot Ol

2022年02月21日 13:31

Hello, Linda!
1. I changed the PSU on new PSU APW12
2. I made flashing SD card
3. I updated the firmware
4.I changed the control board
And now I have not results.
The kernel log, it shows ERROR_EEPROM_INFO

2022年02月21日 13:34

Please help me overcome this error

2022年02月25日 07:46

Hello, we’ll need the completed kernel log for further check.
Please contact us at support-cs@bitmain.com to provide the updated kernel log.

评论

没有找到您要找的？