Antminer S19J Pro HashRate

评论

7 条评论

  • 正式评论

    Hello, It is recommended to unplug the power supply and wait for 20 minutes before restarting. If the problem still exists, please send the completed kernel log to support-cs@bitmain.com for better communication, thanks!

    评论操作 固定链接

    0
    评论操作 固定链接

    BEWARE!

    DO NOT INSTALL the S19j Pro SD card recovery package.  It has BRICKED our miner!

    • Antminer-S19j-Pro-Release-sd2nand-zynq7007-20210605.zip (file size 26.87MB)
    • S19j Pro SD firmware for 7007 control board only (published 2021-08-26)

    This package is identical to the S19j package.  We have compared and match both packages' "update.bmu" file checksums.  Your miner will not be able to detect hash boards, reset to factory default firmware, or update to the Antminer-S19j-Pro-release-202106281212.bin firmware.  Effectively rendering your equipment useless.

    Bitmain support, please send the correct S19j Pro 100T (7007) recovery to niftyframes@protonmail.com

    1
    评论操作 固定链接

    I have same issue just got miner November 24th 2021

    Power on SOLID RED LIGHT along with green

    hashboard 1 hashing at 65gh

    hash board 2 some times shows hashing

    hash board 3 DEAD

    0
    评论操作 固定链接

    Hello, It is recommended to unplug the power supply and wait for 20 minutes before restarting. If the problem still exists, please send the completed kernel log to support-cs@bitmain.com for better communication, thanks!

    0
    评论操作 固定链接

    I have exactly the same problem.  new S19j pro bought on 11/22/2021.  

    0
    评论操作 固定链接

    Hello, It is recommended to unplug the power supply and wait for 20 minutes before restarting. If the problem still exists, please send the completed kernel log to support-cs@bitmain.com for better communication, thanks!

    0
    评论操作 固定链接

请先登录再写评论。