S17 hashboard

评论

5 条评论

  • 正式评论

    Hello, 

    Could you provide the completed kernel log for further check? Thanks!

    评论操作 固定链接

    Hi, Yes sure

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
      Normal zone: 480 pages used for memmap
      Normal zone: 0 pages reserved
      Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1 
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203612K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25764K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
        vector  : 0xffff0000 - 0xffff1000   (   4 kB)
        fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
        vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
        lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
        pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
        modules : 0xbf000000 - 0xbfe00000   (  14 MB)
          .text : 0xc0008000 - 0xc090c424   (9234 kB)
          .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
          .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
           .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12724K (cce94000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAGAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
      No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 4217344893
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 5B0FA78E-FF6E-4540-801D-D3FD60332A35, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 337/92, WL threshold: 4096, image sequence number: 1751317449
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 51C7124B-A562-4AA0-948B-184BE8DB9030, small LPT model
    alloc_contig_range: [e042, e043) PFNs busy
    alloc_contig_range: [e042, e043) PFNs busy
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xab013
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    Sep 26 07:31:16 (none) local0.notice cgminer[1003]: cb_bitmain_submit_nonce nonce submited
    Sep 26 07:31:16 (none) local0.notice cgminer[1003]: Accepted 01230b33 Diff 57.6K/38478 BTM_SOC 0 pool 0 
    Sep 26 07:31:22 (none) local0.notice bmminer: need data size:491, actual size:491
    Sep 26 07:31:22 (none) local0.notice cgminer[1003]: got nonce sz 491
    Sep 26 07:31:22 (none) local0.notice cgminer[1003]: Pool 0 stale share detected, submitting as user requested
    Sep 26 07:31:22 (none) local0.notice cgminer[1003]: cb_bitmain_submit_nonce nonce submited
    Sep 26 07:31:23 (none) local0.notice cgminer[1003]: Accepted 01419df7 Diff 52.2K/38478 BTM_SOC 0 pool 0 
    Sep 26 07:31:34 (none) local0.notice bmminer: need data size:491, actual size:491
    Sep 26 07:31:34 (none) local0.notice cgminer[1003]: got nonce sz 491
    Sep 26 07:31:34 (none) local0.notice cgminer[1003]: Pool 0 stale share detected, submitting as user requested
    Sep 26 07:31:34 (none) local0.notice cgminer[1003]: cb_bitmain_submit_nonce nonce submited
    Sep 26 07:31:34 (none) local0.notice cgminer[1003]: Accepted 731918fe Diff 146K/38478 BTM_SOC 0 pool 0 
    Sep 26 07:31:36 (none) local0.notice bmminer: need data size:491, actual size:491
    Sep 26 07:31:36 (none) local0.notice cgminer[1003]: got nonce sz 491
    Sep 26 07:31:36 (none) local0.notice cgminer[1003]: Pool 0 stale share detected, submitting as user requested
    Sep 26 07:31:36 (none) local0.notice cgminer[1003]: cb_bitmain_submit_nonce nonce submited
    Sep 26 07:31:36 (none) local0.notice cgminer[1003]: Accepted 01aefe9d Diff 38.9K/38478 BTM_SOC 0 pool 0 
    Sep 26 07:31:40 (none) local0.notice bmminer: need data size:491, actual size:491
    Sep 26 07:31:40 (none) local0.notice cgminer[1003]: got nonce sz 491
    Sep 26 07:31:40 (none) local0.notice cgminer[1003]: Pool 0 stale share detected, submitting as user requested
    Sep 26 07:31:40 (none) local0.notice cgminer[1003]: cb_bitmain_submit_nonce nonce submited
    Sep 26 07:31:40 (none) local0.notice cgminer[1003]: Accepted 0179280c Diff 44.5K/38478 BTM_SOC 0 pool 0 
    Sep 26 07:31:44 (none) local0.notice bmminer: need data size:491, actual size:491
    Sep 26 07:31:44 (none) local0.notice cgminer[1003]: got nonce sz 491
    Sep 26 07:31:44 (none) local0.notice cgminer[1003]: Pool 0 stale share detected, submitting as user requested
    Sep 26 07:31:44 (none) local0.notice cgminer[1003]: cb_bitmain_submit_nonce nonce submited
    Sep 26 07:31:45 (none) local0.notice cgminer[1003]: Accepted 32c48b80 Diff 330K/38478 BTM_SOC 0 pool 0 
    Sep 26 07:31:45 (none) local0.notice cgminer[1003]: update job
    Sep 26 07:31:45 (none) local0.notice cgminer[1003]: job buf total len:2510, offset:2510
    Sep 26 07:31:45 (none) local0.notice cgminer[1003]: about to send job, size is 2510
    Sep 26 07:31:45 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2510
    Sep 26 07:31:45 (none) local0.notice bmminer: parse job buf len:2510
    Sep 26 07:31:45 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
    Sep 26 07:31:49 (none) local0.notice bmminer: need data size:491, actual size:491
    Sep 26 07:31:49 (none) local0.notice cgminer[1003]: got nonce sz 491
    Sep 26 07:31:49 (none) local0.notice cgminer[1003]: Pool 0 stale share detected, submitting as user requested
    Sep 26 07:31:49 (none) local0.notice cgminer[1003]: cb_bitmain_submit_nonce nonce submited
    Sep 26 07:31:49 (none) local0.notice cgminer[1003]: Accepted cdb8c830 Diff 81.6K/38478 BTM_SOC 0 pool 0 
    Sep 26 07:31:58 (none) local0.notice bmminer: need data size:491, actual size:491
    Sep 26 07:31:58 (none) local0.notice cgminer[1003]: got nonce sz 491
    Sep 26 07:31:58 (none) local0.notice cgminer[1003]: cb_bitmain_submit_nonce nonce submited
    Sep 26 07:32:02 (none) local0.notice bmminer: need data size:491, actual size:491
    Sep 26 07:32:02 (none) local0.notice cgminer[1003]: got nonce sz 491
    Sep 26 07:32:02 (none) local0.notice cgminer[1003]: Pool 0 stale share detected, submitting as user requested
    Sep 26 07:32:02 (none) local0.notice cgminer[1003]: cb_bitmain_submit_nonce nonce submited
    Sep 26 07:32:02 (none) local0.notice bmminer: need data size:491, actual size:491
    Sep 26 07:32:02 (none) local0.notice cgminer[1003]: got nonce sz 491
    Sep 26 07:32:02 (none) local0.notice cgminer[1003]: Pool 0 stale share detected, submitting as user requested
    Sep 26 07:32:02 (none) local0.notice cgminer[1003]: cb_bitmain_submit_nonce nonce submited
    Sep 26 07:32:02 (none) local0.notice bmminer: need data size:491, actual size:491
    Sep 26 07:32:02 (none) local0.notice cgminer[1003]: got nonce sz 491
    Sep 26 07:32:02 (none) local0.notice cgminer[1003]: Pool 0 stale share detected, submitting as user requested
    Sep 26 07:32:02 (none) local0.notice cgminer[1003]: cb_bitmain_submit_nonce nonce submited
    Sep 26 07:32:03 (none) local0.notice cgminer[1003]: Accepted 576d843c Diff 192K/38478 BTM_SOC 0 pool 0 
    Sep 26 07:32:03 (none) local0.notice cgminer[1003]: Accepted 6f846325 Diff 150K/38478 BTM_SOC 0 pool 0 
    Sep 26 07:32:03 (none) local0.notice cgminer[1003]: Accepted 0176cb53 Diff 44.8K/38478 BTM_SOC 0 pool 0 
    Sep 26 07:32:06 (none) local0.notice bmminer: need data size:491, actual size:491
    Sep 26 07:32:06 (none) local0.notice cgminer[1003]: got nonce sz 491
    Sep 26 07:32:06 (none) local0.notice cgminer[1003]: Pool 0 stale share detected, submitting as user requested
    Sep 26 07:32:06 (none) local0.notice cgminer[1003]: cb_bitmain_submit_nonce nonce submited
    Sep 26 07:32:07 (none) local0.notice cgminer[1003]: Accepted 70c60525 Diff 149K/38478 BTM_SOC 0 pool 0 
    Sep 26 07:32:10 (none) local0.notice bmminer: need data size:491, actual size:491
    Sep 26 07:32:10 (none) local0.notice cgminer[1003]: got nonce sz 491
    Sep 26 07:32:10 (none) local0.notice cgminer[1003]: Pool 0 stale share detected, submitting as user requested
    Sep 26 07:32:10 (none) local0.notice cgminer[1003]: cb_bitmain_submit_nonce nonce submited
    Sep 26 07:32:10 (none) local0.notice cgminer[1003]: Accepted 01099785 Diff 63.2K/38478 BTM_SOC 0 pool 0 
    2021-09-25 14:24:18 driver-btm-api.c:542:init_freq_mode: This is scan-user version
    2021-09-25 14:24:18 driver-btm-api.c:1877:bitmain_soc_init: opt_multi_version     = 1
    2021-09-25 14:24:18 driver-btm-api.c:1878:bitmain_soc_init: opt_bitmain_ab        = 1
    2021-09-25 14:24:18 driver-btm-api.c:1879:bitmain_soc_init: opt_bitmain_work_mode = 2
    2021-09-25 14:24:18 driver-btm-api.c:1880:bitmain_soc_init: Miner compile time: Mon Apr 27 13:23:07 CST 2020 type: Antminer S17
    2021-09-25 14:24:18 driver-btm-api.c:1881:bitmain_soc_init: commit version: d22f356 2020-04-24 18:30:49, build by: lol 2020-04-27 13:30:25
    2021-09-25 14:24:18 driver-btm-api.c:1691:show_sn: no SN got, please write SN to /nvdata/sn
    2021-09-25 14:24:18 driver-btm-api.c:1040:miner_device_init: Detect 256MB control board of XILINX
    2021-09-25 14:24:18 driver-btm-api.c:988:init_fan_parameter: fan_eft : 0  fan_pwm : 0
    2021-09-25 14:24:18 thread.c:783:create_read_nonce_reg_thread: create thread
    2021-09-25 14:24:24 driver-btm-api.c:972:init_miner_version: miner ID : 81444d025c208854
    2021-09-25 14:24:24 driver-btm-api.c:978:init_miner_version: FPGA Version = 0xB013
    2021-09-25 14:24:30 driver-btm-api.c:616:get_product_id: product_id[0] = 1
    2021-09-25 14:24:30 driver-btm-api.c:616:get_product_id: product_id[1] = 1
    2021-09-25 14:24:30 driver-btm-api.c:616:get_product_id: product_id[2] = 1
    2021-09-25 14:24:30 driver-btm-api.c:560:_set_project_type: project:1
    2021-09-25 14:24:30 driver-btm-api.c:585:_set_project_type: Project type: Antminer S17
    2021-09-25 14:24:30 driver-btm-api.c:596:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101
    2021-09-25 14:24:30 driver-btm-api.c:597:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103
    2021-09-25 14:24:30 driver-btm-api.c:596:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101
    2021-09-25 14:24:30 driver-btm-api.c:597:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103
    2021-09-25 14:24:30 driver-btm-api.c:596:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101
    2021-09-25 14:24:30 driver-btm-api.c:597:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103
    2021-09-25 14:24:33 driver-btm-api.c:1802:bitmain_board_init: Fan check passed.
    2021-09-25 14:24:34 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
    2021-09-25 14:24:36 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
    2021-09-25 14:24:37 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2021-09-25 14:24:39 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
    2021-09-25 14:24:40 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2021-09-25 14:24:42 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
    2021-09-25 14:24:42 thread.c:778:create_pic_heart_beat_thread: create thread
    2021-09-25 14:24:42 power_api.c:207:power_init: Power init:
    2021-09-25 14:24:42 power_api.c:208:power_init: current_voltage_raw = 0
    2021-09-25 14:24:42 power_api.c:209:power_init: highest_voltage_raw = 2100
    2021-09-25 14:24:42 power_api.c:210:power_init: working_voltage_raw = 1830
    2021-09-25 14:24:42 power_api.c:211:power_init: higher_voltage_raw  = 1950
    2021-09-25 14:24:42 driver-btm-api.c:1812:bitmain_board_init: Enter 30s sleep to make sure power release finish.
    2021-09-25 14:24:42 power_api.c:181:power_off: init gpio907
    2021-09-25 14:25:14 power_api.c:251:set_to_highest_voltage: Set to voltage raw 2100, one step.
    2021-09-25 14:25:16 power_api.c:87:check_voltage_multi: retry time: 0
    2021-09-25 14:25:17 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.197988
    2021-09-25 14:25:18 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.302080
    2021-09-25 14:25:19 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.142881
    2021-09-25 14:25:19 power_api.c:50:_get_avg_voltage: average_voltage = 21.214316
    2021-09-25 14:25:19 power_api.c:68:check_voltage: target_vol = 21.00, actural_vol = 21.21, check voltage passed.
    2021-09-25 14:25:19 uart.c:71:set_baud: set fpga_baud to 115200
    2021-09-25 14:25:31 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 48 asic, times 0
    2021-09-25 14:25:42 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 47 asic, times 0
    2021-09-25 14:25:53 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 47 asic, times 1
    2021-09-25 14:26:04 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 46 asic, times 2
    2021-09-25 14:26:04 driver-btm-api.c:942:check_asic_number: Chain 1 only find 46 asic, will power off hash board 1
    2021-09-25 14:26:16 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 48 asic, times 0
    2021-09-25 14:26:20 driver-btm-api.c:345:set_order_clock: chain[0]: set order clock, stragegy 3
    2021-09-25 14:26:20 driver-btm-api.c:345:set_order_clock: chain[2]: set order clock, stragegy 3
    2021-09-25 14:26:20 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0xb4
    2021-09-25 14:26:20 uart.c:71:set_baud: set fpga_baud to 3000000
    2021-09-25 14:26:20 driver-btm-api.c:1574:check_clock_counter: freq 50 clock_counter_limit 6
    2021-09-25 14:26:22 uart.c:71:set_baud: set fpga_baud to 115200
    2021-09-25 14:26:22 voltage[0] = 1840
    2021-09-25 14:26:22 voltage[2] = 1840
    2021-09-25 14:26:22 power_api.c:219:set_working_voltage_raw: working_voltage_raw = 1840
    2021-09-25 14:26:23 temperature.c:281:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success.
    2021-09-25 14:26:24 temperature.c:281:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success.
    2021-09-25 14:26:24 uart.c:71:set_baud: set fpga_baud to 6000000
    2021-09-25 14:26:26 driver-btm-api.c:245:check_bringup_temp: Bring up temperature is 27
    2021-09-25 14:26:26 thread.c:798:create_check_miner_status_thread: create thread
    2021-09-25 14:26:26 thread.c:788:create_set_miner_status_thread: create thread
    2021-09-25 14:26:26 thread.c:773:create_temperature_monitor_thread: create thread
    2021-09-25 14:26:26 frequency.c:749:inc_freq_with_fixed_vco: chain = 255, freq = 565, is_higher_voltage = true
    2021-09-25 14:26:26 power_api.c:287:set_to_voltage_by_steps: Set to voltage raw 2020, step by step.
    2021-09-25 14:26:43 power_api.c:87:check_voltage_multi: retry time: 0
    2021-09-25 14:26:44 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 20.359131
    2021-09-25 14:26:45 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 20.304023
    2021-09-25 14:26:45 power_api.c:50:_get_avg_voltage: average_voltage = 20.331577
    2021-09-25 14:26:45 power_api.c:68:check_voltage: target_vol = 20.20, actural_vol = 20.33, check voltage passed.
    2021-09-25 14:27:16 power_api.c:287:set_to_voltage_by_steps: Set to voltage raw 1880, step by step.
    2021-09-25 14:27:33 power_api.c:87:check_voltage_multi: retry time: 0
    2021-09-25 14:27:34 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 18.938584
    2021-09-25 14:27:35 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 18.877353
    2021-09-25 14:27:35 power_api.c:50:_get_avg_voltage: average_voltage = 18.907969
    2021-09-25 14:27:35 power_api.c:68:check_voltage: target_vol = 18.80, actural_vol = 18.91, check voltage passed.
    2021-09-25 14:27:41 driver-btm-api.c:528:set_timeout: freq = 565, percent = 90, hcn = 73728, timeout = 130
    2021-09-25 14:27:41 power_api.c:269:set_to_working_voltage_by_steps: Set to voltage raw 1840, step by step.
    2021-09-25 14:27:58 power_api.c:87:check_voltage_multi: retry time: 0
    2021-09-25 14:27:59 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 18.503847
    2021-09-25 14:28:00 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 18.454863
    2021-09-25 14:28:00 power_api.c:50:_get_avg_voltage: average_voltage = 18.479355
    2021-09-25 14:28:00 power_api.c:68:check_voltage: target_vol = 18.40, actural_vol = 18.48, check voltage passed.
    2021-09-25 14:28:00 thread.c:793:create_check_system_status_thread: create thread
    2021-09-25 14:28:01 driver-btm-api.c:1988:bitmain_soc_init: Init done!
    2021-09-25 14:28:01 driver-btm-api.c:198:set_miner_status: STATUS_INIT
    2021-09-25 14:28:05 driver-btm-api.c:198:set_miner_status: STATUS_OKAY
    2021-09-25 14:28:06 frequency.c:216:get_ideal_hash_rate_GH: ideal_hash_rate = 35720
    2021-09-25 14:28:06 frequency.c:236:get_sale_hash_rate_GH: sale_hash_rate = 35000
    2021-09-25 14:28:10 driver-btm-api.c:1199:dhash_chip_send_job: Version num 1
    2021-09-25 14:28:40 driver-btm-api.c:1199:dhash_chip_send_job: Version num 4
    2021-09-25 14:58:41 thread.c:225:calc_hashrate_avg: avg rate is 36076.81 in 30 mins
    2021-09-25 14:58:41 temperature.c:449:temp_statistics_show:   pcb temp 38~60  chip temp 60~80
    2021-09-25 15:28:42 thread.c:225:calc_hashrate_avg: avg rate is 36293.04 in 30 mins
    2021-09-25 15:28:42 temperature.c:449:temp_statistics_show:   pcb temp 39~61  chip temp 61~80
    2021-09-25 15:58:43 thread.c:225:calc_hashrate_avg: avg rate is 36219.78 in 30 mins
    0
    评论操作 固定链接

    Hello, 

    It is recommended to clean up the dust , and plug and unplug the cable to see if it is loose.
    How To Clean and Dust The Antminers.
    https://support.bitmain.com/hc/en-us/articles/115004520173-How-To-Clean-and-Dust-The-Antminers

    If the problem still exists, please contact us by support-cs@bitmain.com for more information.

    0
    评论操作 固定链接

    thank u for ur advice ,

    i already done deep cleaning and cable change. some times it works OK . but at a reset it got that error.

    0
    评论操作 固定链接

    Hello, if the problem still exists, we suggest to contact us by support-cs@bitmain.com to provide new kernel log for better communication, thanks!

    0
    评论操作 固定链接

请先登录再写评论。