S19J PRO chip state abnormal & hashrate abnormal

评论

10 条评论

  • 正式评论

    Dear, sorry we don't have any related instruction of opening the miner.

    If your problem still exists you can contact us by support-cs@bitmain.com to provide more details.

    评论操作 固定链接

    The kernel log looks normal, the machine has just started, you can wait and check again.

    0
    评论操作 固定链接

    Hi Lisa,

    I have tried many times and kept the miner running longer hours. Even a hard reset. Attached the log and screenshots after 20 minutes:

     

     

    free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000

      Normal zone: 480 pages used for memmap

      Normal zone: 0 pages reserved

      Normal zone: 61440 pages, LIFO batch:15

    percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152

    pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096

    pcpu-alloc: [0] 0 [0] 1

    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960

    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk

    PID hash table entries: 1024 (order: 0, 4096 bytes)

    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

    Memory: 209676K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19700K reserved, 16384K cma-reserved, 0K highmem)

    Virtual kernel memory layout:

        vector  : 0xffff0000 - 0xffff1000   (   4 kB)

        fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)

        vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)

        lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)

        pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

        modules : 0xbf000000 - 0xbfe00000   (  14 MB)

          .text : 0xc0008000 - 0xc090e410   (9242 kB)

          .init : 0xc0a00000 - 0xc0b00000   (1024 kB)

          .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)

           .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)

    Preemptible hierarchical RCU implementation.

    Build-time adjustment of leaf fanout to 32.

    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.

    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2

    NR_IRQS:16 nr_irqs:16 16

    efuse mapped to cf800000

    ps7-slcr mapped to cf802000

    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000

    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000

    L2C-310 erratum 769419 enabled

    L2C-310 enabling early BRESP for Cortex-A9

    L2C-310 full line of zeros enabled for Cortex-A9

    L2C-310 ID prefetch enabled, offset 1 lines

    L2C-310 dynamic clock gating enabled, standby mode enabled

    L2C-310 cache controller enabled, 8 ways, 512 kB

    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001

    zynq_clock_init: clkc starts at cf802100

    Zynq clock init

    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns

    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns

    Switching to timer-based delay loop, resolution 3ns

    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns

    ps7-ttc #0 at cf80a000, irq=18

    Console: colour dummy device 80x30

    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)

    pid_max: default: 32768 minimum: 301

    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

    CPU: Testing write buffer coherency: ok

    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

    Setting up static identity map for 0x100000 - 0x100058

    CPU1: failed to boot: -1

    Brought up 1 CPUs

    SMP: Total of 1 processors activated (666.66 BogoMIPS).

    CPU: All CPU(s) started in SVC mode.

    devtmpfs: initialized

    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

    pinctrl core: initialized pinctrl subsystem

    NET: Registered protocol family 16

    DMA: preallocated 256 KiB pool for atomic coherent allocations

    cpuidle: using governor menu

    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.

    hw-breakpoint: maximum watchpoint size is 4 bytes.

    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000

    vgaarb: loaded

    SCSI subsystem initialized

    usbcore: registered new interface driver usbfs

    usbcore: registered new interface driver hub

    usbcore: registered new device driver usb

    media: Linux media interface: v0.10

    Linux video capture interface: v2.00

    pps_core: LinuxPPS API ver. 1 registered

    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

    PTP clock support registered

    EDAC MC: Ver: 3.0.0

    Advanced Linux Sound Architecture Driver Initialized.

    clocksource: Switched to clocksource arm_global_timer

    NET: Registered protocol family 2

    TCP established hash table entries: 2048 (order: 1, 8192 bytes)

    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)

    TCP: Hash tables configured (established 2048 bind 2048)

    UDP hash table entries: 256 (order: 1, 8192 bytes)

    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

    NET: Registered protocol family 1

    RPC: Registered named UNIX socket transport module.

    RPC: Registered udp transport module.

    RPC: Registered tcp transport module.

    RPC: Registered tcp NFSv4.1 backchannel transport module.

    PCI: CLS 0 bytes, default 64

    Trying to unpack rootfs image as initramfs...

    rootfs image is not initramfs (no cpio magic); looks like an initrd

    Freeing initrd memory: 6628K (cd480000 - cdaf9000)

    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available

    futex hash table entries: 512 (order: 3, 32768 bytes)

    workingset: timestamp_bits=28 max_order=16 bucket_order=0

    jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

    io scheduler noop registered

    io scheduler deadline registered

    io scheduler cfq registered (default)

    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330

    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16

    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps

    console [ttyPS0] enabled

    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000

    [drm] Initialized drm 1.1.0 20060810

    brd: module loaded

    loop: module loaded

    CAN device driver interface

    gpiod_set_value: invalid GPIO

    libphy: MACB_mii_bus: probed

    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)

    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)

    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k

    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.

    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

    ehci-pci: EHCI PCI platform driver

    usbcore: registered new interface driver usb-storage

    mousedev: PS/2 mouse device common for all mice

    i2c /dev entries driver

    cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154

    Xilinx Zynq CpuIdle Driver started

    sdhci: Secure Digital Host Controller Interface driver

    sdhci: Copyright(c) Pierre Ossman

    sdhci-pltfm: SDHCI platform and OF driver helper

    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA

    ledtrig-cpu: registered to indicate activity on CPUs

    usbcore: registered new interface driver usbhid

    usbhid: USB HID core driver

    nand: disable subpage write

    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda

    nand: Micron MT29F2G08ABAEAWP

    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64

    nand: NAND_ECC_HW

    nand: NAND_ECC_HW_SYNDROME

    mtd->writesize = 2048

    ecc->strength = 1

    ecc->size = 2048

    mtd->writesize = 2048

    chip->ecc_strength_ds = 4

    chip->ecc_step_ds = 512

    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip

    Bad block table found at page 131008, version 0x01

    Bad block table found at page 130944, version 0x01

    8 ofpart partitions found on MTD device pl35x-nand

    Creating 8 MTD partitions on "pl35x-nand":

    0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"

    0x000002800000-0x000004800000 : "ramfs"

    0x000004800000-0x000005000000 : "configs"

    0x000005000000-0x000005200000 : "sig"

    0x000005200000-0x000006000000 : "reserve1"

    0x000006000000-0x000007000000 : "upgrade-ramfs"

    0x000007000000-0x00000a800000 : "upgrade-file"

    0x00000a800000-0x000010000000 : "reserve2"

    nf_conntrack version 0.5.0 (3635 buckets, 14540 max)

    ip_tables: (C) 2000-2006 Netfilter Core Team

    NET: Registered protocol family 10

    ip6_tables: (C) 2000-2006 Netfilter Core Team

    sit: IPv6 over IPv4 tunneling driver

    NET: Registered protocol family 17

    can: controller area network core (rev 20120528 abi 9)

    NET: Registered protocol family 29

    can: raw protocol (rev 20120528)

    can: broadcast manager protocol (rev 20120528 t)

    can: netlink gateway (rev 20130117) max_hops=1

    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'

    zynq_pm_late_init: Unable to map DDRC IO memory.

    Registering SWP/SWPB emulation handler

    hctosys: unable to open rtc device (rtc0)

    ALSA device list:

      No soundcards found.

    RAMDISK: gzip image found at block 0

    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities

    EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended

    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)

    VFS: Mounted root (ext4 filesystem) on device 1:0.

    devtmpfs: mounted

    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)

    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro

    devpts: called with bogus options

    ubi0: attaching mtd2

    ubi0: scanning is finished

    ubi0: attached mtd2 (name "configs", size 8 MiB)

    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096

    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0

    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128

    ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1221860814

    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4

    ubi0: background thread "ubi_bgt0d" started, PID 729

    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733

    UBIFS (ubi0:0): recovery needed

    UBIFS (ubi0:0): recovery completed

    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"

    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

    UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)

    UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)

    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 42CDF677-D426-4DE8-8441-A68F4B4526E2, small LPT model

    ubi2: attaching mtd4

    ubi2: scanning is finished

    ubi2: attached mtd4 (name "reserve1", size 14 MiB)

    ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

    ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

    ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096

    ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0

    ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128

    ubi2: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 2297057111

    ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4

    ubi2: background thread "ubi_bgt2d" started, PID 740

    UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744

    UBIFS (ubi2:0): recovery needed

    UBIFS (ubi2:0): recovery completed

    UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"

    UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

    UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)

    UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)

    UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 3686E2BB-BB01-4780-A893-D5340E1248B7, small LPT model

    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

    random: avahi-daemon urandom read with 2 bits of entropy available

    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz

    macb e000b000.ethernet eth0: link up (100/Full)

    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

    In axi fpga driver!

    request_mem_region OK!

    AXI fpga dev virtual address is 0xcfbc8000

    *base_vir_addr = 0xb031

    In fpga mem driver!

    request_mem_region OK!

    fpga mem virtual address is 0xd2000000

    random: nonblocking pool is initialized

     

     

    ===========================================Miner log===========================================

    1970-01-01 00:00:10 Miner compile time: Sat May 15 21:17:18 CST 2021 type: Antminer S19j Pro

    1970-01-01 00:00:11 This is fix-freq version

    1970-01-01 00:00:11 Miner compile time: Sat May 15 21:17:18 CST 2021 type: Antminer S19j Pro

    1970-01-01 00:00:11 commit åversion: 46c2188 2021-05-15 21:14:17, build by: jenkins 2021-05-15 21:17:17

    1970-01-01 00:00:11 opt_multi_version     = 1

    1970-01-01 00:00:11 opt_bitmain_ab        = 1

    1970-01-01 00:00:11 mid_auto_gen          = 0

    1970-01-01 00:00:11 opt_bitmain_work_mode = 0

    1970-01-01 00:00:11 mmap fpga_mem_addr_hal = 0xb5700000

    1970-01-01 00:00:11 HASH_ON_PLUG V9 = 0x7

    1970-01-01 00:00:11 Note: front fan is power on!

    1970-01-01 00:00:11 Note: rear fan is power on!

    1970-01-01 00:00:11 start the http log.

    1970-01-01 00:00:11 httpListenThread start ret=0

    1970-01-01 00:00:11 start listen on 6060 ...

    1970-01-01 00:00:11 load machine BHB42601 conf

    1970-01-01 00:00:11 machine : BHB42601

    1970-01-01 00:00:11 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3

    2021-09-20 19:18:51 miner ID : 8022e5467510481c

    2021-09-20 19:18:51 FPGA Version = 0xB031

    2021-09-20 19:18:51 HASH_ON_PLUG V9 = 0x7

    2021-09-20 19:18:51 ==========================capability start==========================

    2021-09-20 19:18:51 board num = 3

    2021-09-20 19:18:51 board id = 0, chain num = 1

    2021-09-20 19:18:51 chain id = 0

    2021-09-20 19:18:51 board id = 1, chain num = 1

    2021-09-20 19:18:51 chain id = 1

    2021-09-20 19:18:51 board id = 2, chain num = 1

    2021-09-20 19:18:51 chain id = 2

    2021-09-20 19:18:51 ==========================capability end============================

    2021-09-20 19:18:51 chain num = 3

    2021-09-20 19:18:53 load chain 0 eeprom data

    2021-09-20 19:18:53 board_info_version = 4

    2021-09-20 19:18:53 algorithm_and_key_version = 0x11

    2021-09-20 19:18:53 board_sn = HQDZYN3BAJEBD05BA

    2021-09-20 19:18:53 chip_die = ED

    2021-09-20 19:18:53 chip_marking = S1CT21AY59

    2021-09-20 19:18:53 chip_bin = 2

    2021-09-20 19:18:53 ft_version = F1V04B3C1

    2021-09-20 19:18:53 pcb_version = 0x100

    2021-09-20 19:18:53 bom_version = 0x10

    2021-09-20 19:18:53 asic_sensor_type = 0x0

    2021-09-20 19:18:53 asic_sensor_addr[0] = 0x0

    2021-09-20 19:18:53 asic_sensor_addr[1] = 0x0

    2021-09-20 19:18:53 asic_sensor_addr[2] = 0x0

    2021-09-20 19:18:53 asic_sensor_addr[3] = 0x0

    2021-09-20 19:18:53 pic_sensor_type = 0x8b

    2021-09-20 19:18:53 pic_sensor_addr = 0xf

    2021-09-20 19:18:53 chip_tech = AA

    2021-09-20 19:18:53 board_name = BHB42601

    2021-09-20 19:18:53 factory_job = 20210601003-ZB

    2021-09-20 19:18:53 board_info_crc = 0xf

    2021-09-20 19:18:53 voltage = 1380

    2021-09-20 19:18:53 frequency = 525

    2021-09-20 19:18:53 nonce_rate = 9997

    2021-09-20 19:18:53 pcb_temp_in = 28

    2021-09-20 19:18:53 pcb_temp_out = 29

    2021-09-20 19:18:53 test_version = 1

    2021-09-20 19:18:53 test_standard = 0

    2021-09-20 19:18:53 param_info_crc = 0x16

    2021-09-20 19:18:53 pt1_result = 1

    2021-09-20 19:18:53 pt1_count = 1

    2021-09-20 19:18:53 pt2_result = 1

    2021-09-20 19:18:53 pt2_count = 1

    2021-09-20 19:18:55 load chain 1 eeprom data

    2021-09-20 19:18:55 board_info_version = 4

    2021-09-20 19:18:55 algorithm_and_key_version = 0x11

    2021-09-20 19:18:55 board_sn = HQDZYN3BAJEBD03ZK

    2021-09-20 19:18:55 chip_die = ED

    2021-09-20 19:18:55 chip_marking = S1CT21AY59

    2021-09-20 19:18:55 chip_bin = 1

    2021-09-20 19:18:55 ft_version = F1V04B3C1

    2021-09-20 19:18:55 pcb_version = 0x100

    2021-09-20 19:18:55 bom_version = 0x10

    2021-09-20 19:18:55 asic_sensor_type = 0x0

    2021-09-20 19:18:55 asic_sensor_addr[0] = 0x0

    2021-09-20 19:18:55 asic_sensor_addr[1] = 0x0

    2021-09-20 19:18:55 asic_sensor_addr[2] = 0x0

    2021-09-20 19:18:55 asic_sensor_addr[3] = 0x0

    2021-09-20 19:18:55 pic_sensor_type = 0x8b

    2021-09-20 19:18:55 pic_sensor_addr = 0xf

    2021-09-20 19:18:55 chip_tech = AA

    2021-09-20 19:18:55 board_name = BHB42601

    2021-09-20 19:18:55 factory_job = 20210601003-ZB

    2021-09-20 19:18:55 board_info_crc = 0xa

    2021-09-20 19:18:55 voltage = 1380

    2021-09-20 19:18:55 frequency = 525

    2021-09-20 19:18:55 nonce_rate = 9994

    2021-09-20 19:18:55 pcb_temp_in = 29

    2021-09-20 19:18:55 pcb_temp_out = 30

    2021-09-20 19:18:55 test_version = 1

    2021-09-20 19:18:55 test_standard = 0

    2021-09-20 19:18:55 param_info_crc = 0x19

    2021-09-20 19:18:55 pt1_result = 1

    2021-09-20 19:18:55 pt1_count = 1

    2021-09-20 19:18:55 pt2_result = 1

    2021-09-20 19:18:55 pt2_count = 1

    2021-09-20 19:18:56 load chain 2 eeprom data

    2021-09-20 19:18:56 board_info_version = 4

    2021-09-20 19:18:56 algorithm_and_key_version = 0x11

    2021-09-20 19:18:56 board_sn = HQDZYN3BAJEBD041Z

    2021-09-20 19:18:56 chip_die = ED

    2021-09-20 19:18:56 chip_marking = S1CT21AY59

    2021-09-20 19:18:56 chip_bin = 1

    2021-09-20 19:18:56 ft_version = F1V04B3C1

    2021-09-20 19:18:56 pcb_version = 0x100

    2021-09-20 19:18:56 bom_version = 0x10

    2021-09-20 19:18:56 asic_sensor_type = 0x0

    2021-09-20 19:18:56 asic_sensor_addr[0] = 0x0

    2021-09-20 19:18:56 asic_sensor_addr[1] = 0x0

    2021-09-20 19:18:56 asic_sensor_addr[2] = 0x0

    2021-09-20 19:18:56 asic_sensor_addr[3] = 0x0

    2021-09-20 19:18:56 pic_sensor_type = 0x8b

    2021-09-20 19:18:56 pic_sensor_addr = 0xf

    2021-09-20 19:18:56 chip_tech = AA

    2021-09-20 19:18:56 board_name = BHB42601

    2021-09-20 19:18:56 factory_job = 20210601003-ZB

    2021-09-20 19:18:56 board_info_crc = 0xf

    2021-09-20 19:18:56 voltage = 1380

    2021-09-20 19:18:56 frequency = 525

    2021-09-20 19:18:56 nonce_rate = 9998

    2021-09-20 19:18:56 pcb_temp_in = 29

    2021-09-20 19:18:56 pcb_temp_out = 32

    2021-09-20 19:18:56 test_version = 1

    2021-09-20 19:18:56 test_standard = 0

    2021-09-20 19:18:56 param_info_crc = 0x1f

    2021-09-20 19:18:56 pt1_result = 1

    2021-09-20 19:18:56 pt1_count = 1

    2021-09-20 19:18:56 pt2_result = 1

    2021-09-20 19:18:56 pt2_count = 1

    2021-09-20 19:18:56 fan_eft : 0  fan_pwm : 100

    2021-09-20 19:18:56 create thread get_nonce_and_register_thread

    2021-09-20 19:18:56 fixed working voltage = 1380

    2021-09-20 19:18:56 Chain [0] PCB Version: 0x0100

    2021-09-20 19:18:56 Chain [0] BOM Version: 0x0010

    2021-09-20 19:18:56 Chain [1] PCB Version: 0x0100

    2021-09-20 19:18:56 Chain [1] BOM Version: 0x0010

    2021-09-20 19:18:56 Chain [2] PCB Version: 0x0100

    2021-09-20 19:18:56 Chain [2] BOM Version: 0x0010

    2021-09-20 19:19:00 Fan check passed.

    2021-09-20 19:19:01 chain[0] PIC jump to app

    2021-09-20 19:19:03 Check chain[0] PIC fw version=0x89

    2021-09-20 19:19:04 chain[1] PIC jump to app

    2021-09-20 19:19:05 Check chain[1] PIC fw version=0x89

    2021-09-20 19:19:07 chain[2] PIC jump to app

    2021-09-20 19:19:08 Check chain[2] PIC fw version=0x89

    2021-09-20 19:19:08 create thread pic_heart_beat_thread

    2021-09-20 19:19:08 max sensor num = 4

    2021-09-20 19:19:08 temperature_monitor_thread start...

    2021-09-20 19:19:12 power type version: 0x0071

    2021-09-20 19:19:12 Enter sleep to make sure power release finish.

    2021-09-20 19:19:43 Slept 30 seconds, diff = 2.

    2021-09-20 19:19:45 set_voltage_by_steps to 1500.

    2021-09-20 19:19:50 start up min temp by 75a = 25

    2021-09-20 19:19:50 set UART baud to 115200

    2021-09-20 19:19:53 chain avg vol rise to 15.28

    2021-09-20 19:20:00 Chain[0]: find 126 asic, times 0

    2021-09-20 19:20:10 Chain[1]: find 126 asic, times 0

    2021-09-20 19:20:20 Chain[2]: find 126 asic, times 0

    2021-09-20 19:20:25 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1

    2021-09-20 19:20:30 min freq in eeprom = 525

    2021-09-20 19:20:30 fixed frequency is 525

    2021-09-20 19:20:30 Bring up temperature is 25

    2021-09-20 19:20:30 set UART baud to 12000000

    2021-09-20 19:20:30 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1

    2021-09-20 19:20:30 start do_core_reset

    2021-09-20 19:20:51 end do_core_reset

    2021-09-20 19:20:51 STATUS_INITED: soc init done!

    2021-09-20 19:20:51 create thread check_miner_status_thread

    2021-09-20 19:20:51 create thread check_system_work_thread

    2021-09-20 19:24:01 reload pool, need recalculate

    2021-09-20 19:24:01 set_start_time_point total_tv_start_sys=327 total_tv_end_sys=328

    2021-09-20 19:24:02 start to init...

    2021-09-20 19:24:02 set_voltage_by_steps to 1450.

    2021-09-20 19:24:04 fixed step freq_start = 50, freq_end = 525, freq_step = 6.25

    2021-09-20 19:24:04 chain = 0 set freq to 56.25

    2021-09-20 19:24:04 chain = 1 set freq to 56.25

    2021-09-20 19:24:04 chain = 2 set freq to 56.25

    2021-09-20 19:24:04 chain = 0 set freq to 62.50

    2021-09-20 19:24:04 chain = 1 set freq to 62.50

    2021-09-20 19:24:04 chain = 2 set freq to 62.50

    2021-09-20 19:24:04 chain = 0 set freq to 68.75

    2021-09-20 19:24:04 chain = 1 set freq to 68.75

    2021-09-20 19:24:04 chain = 2 set freq to 68.75

    2021-09-20 19:24:04 chain = 0 set freq to 75.00

    2021-09-20 19:24:04 chain = 1 set freq to 75.00

    2021-09-20 19:24:04 chain = 2 set freq to 75.00

    2021-09-20 19:24:04 chain = 0 set freq to 81.25

    2021-09-20 19:24:04 chain = 1 set freq to 81.25

    2021-09-20 19:24:04 chain = 2 set freq to 81.25

    2021-09-20 19:24:04 chain = 0 set freq to 87.50

    2021-09-20 19:24:04 chain = 1 set freq to 87.50

    2021-09-20 19:24:04 chain = 2 set freq to 87.50

    2021-09-20 19:24:04 chain = 0 set freq to 93.75

    2021-09-20 19:24:04 chain = 1 set freq to 93.75

    2021-09-20 19:24:04 chain = 2 set freq to 93.75

    2021-09-20 19:24:04 chain = 0 set freq to 100.00

    2021-09-20 19:24:04 chain = 1 set freq to 100.00

    2021-09-20 19:24:05 chain = 2 set freq to 100.00

    2021-09-20 19:24:05 chain = 0 set freq to 106.25

    2021-09-20 19:24:05 chain = 1 set freq to 106.25

    2021-09-20 19:24:05 chain = 2 set freq to 106.25

    2021-09-20 19:24:05 chain = 0 set freq to 112.50

    2021-09-20 19:24:05 chain = 1 set freq to 112.50

    2021-09-20 19:24:05 chain = 2 set freq to 112.50

    2021-09-20 19:24:05 chain = 0 set freq to 118.75

    2021-09-20 19:24:05 chain = 1 set freq to 118.75

    2021-09-20 19:24:05 chain = 2 set freq to 118.75

    2021-09-20 19:24:05 chain = 0 set freq to 125.00

    2021-09-20 19:24:05 chain = 1 set freq to 125.00

    2021-09-20 19:24:05 chain = 2 set freq to 125.00

    2021-09-20 19:24:05 chain = 0 set freq to 131.25

    2021-09-20 19:24:05 chain = 1 set freq to 131.25

    2021-09-20 19:24:05 chain = 2 set freq to 131.25

    2021-09-20 19:24:05 chain = 0 set freq to 137.50

    2021-09-20 19:24:05 chain = 1 set freq to 137.50

    2021-09-20 19:24:05 chain = 2 set freq to 137.50

    2021-09-20 19:24:05 chain = 0 set freq to 143.75

    2021-09-20 19:24:05 chain = 1 set freq to 143.75

    2021-09-20 19:24:05 chain = 2 set freq to 143.75

    2021-09-20 19:24:05 chain = 0 set freq to 150.00

    2021-09-20 19:24:05 chain = 1 set freq to 150.00

    2021-09-20 19:24:05 chain = 2 set freq to 150.00

    2021-09-20 19:24:05 chain = 0 set freq to 156.25

    2021-09-20 19:24:05 chain = 1 set freq to 156.25

    2021-09-20 19:24:05 chain = 2 set freq to 156.25

    2021-09-20 19:24:06 chain = 0 set freq to 162.50

    2021-09-20 19:24:06 chain = 1 set freq to 162.50

    2021-09-20 19:24:06 chain = 2 set freq to 162.50

    2021-09-20 19:24:06 chain = 0 set freq to 168.75

    2021-09-20 19:24:06 chain = 1 set freq to 168.75

    2021-09-20 19:24:06 chain = 2 set freq to 168.75

    2021-09-20 19:24:06 chain = 0 set freq to 175.00

    2021-09-20 19:24:06 chain = 1 set freq to 175.00

    2021-09-20 19:24:06 chain = 2 set freq to 175.00

    2021-09-20 19:24:06 chain = 0 set freq to 181.25

    2021-09-20 19:24:06 chain = 1 set freq to 181.25

    2021-09-20 19:24:06 chain = 2 set freq to 181.25

    2021-09-20 19:24:06 chain = 0 set freq to 187.50

    2021-09-20 19:24:06 chain = 1 set freq to 187.50

    2021-09-20 19:24:06 chain = 2 set freq to 187.50

    2021-09-20 19:24:06 chain = 0 set freq to 193.75

    2021-09-20 19:24:06 chain = 1 set freq to 193.75

    2021-09-20 19:24:06 chain = 2 set freq to 193.75

    2021-09-20 19:24:06 chain = 0 set freq to 200.00

    2021-09-20 19:24:06 chain = 1 set freq to 200.00

    2021-09-20 19:24:06 chain = 2 set freq to 200.00

    2021-09-20 19:24:06 chain = 0 set freq to 206.25

    2021-09-20 19:24:06 chain = 1 set freq to 206.25

    2021-09-20 19:24:06 chain = 2 set freq to 206.25

    2021-09-20 19:24:06 chain = 0 set freq to 212.50

    2021-09-20 19:24:06 chain = 1 set freq to 212.50

    2021-09-20 19:24:06 chain = 2 set freq to 212.50

    2021-09-20 19:24:06 chain = 0 set freq to 218.75

    2021-09-20 19:24:06 chain = 1 set freq to 218.75

    2021-09-20 19:24:06 chain = 2 set freq to 218.75

    2021-09-20 19:24:07 chain = 0 set freq to 225.00

    2021-09-20 19:24:07 chain = 1 set freq to 225.00

    2021-09-20 19:24:07 chain = 2 set freq to 225.00

    2021-09-20 19:24:07 chain = 0 set freq to 231.25

    2021-09-20 19:24:07 chain = 1 set freq to 231.25

    2021-09-20 19:24:07 chain = 2 set freq to 231.25

    2021-09-20 19:24:07 chain = 0 set freq to 237.50

    2021-09-20 19:24:07 chain = 1 set freq to 237.50

    2021-09-20 19:24:07 chain = 2 set freq to 237.50

    2021-09-20 19:24:07 chain = 0 set freq to 243.75

    2021-09-20 19:24:07 chain = 1 set freq to 243.75

    2021-09-20 19:24:07 chain = 2 set freq to 243.75

    2021-09-20 19:24:07 chain = 0 set freq to 250.00

    2021-09-20 19:24:07 chain = 1 set freq to 250.00

    2021-09-20 19:24:07 chain = 2 set freq to 250.00

    2021-09-20 19:24:07 chain = 0 set freq to 256.25

    2021-09-20 19:24:07 chain = 1 set freq to 256.25

    2021-09-20 19:24:07 chain = 2 set freq to 256.25

    2021-09-20 19:24:07 chain = 0 set freq to 262.50

    2021-09-20 19:24:07 chain = 1 set freq to 262.50

    2021-09-20 19:24:07 chain = 2 set freq to 262.50

    2021-09-20 19:24:07 chain = 0 set freq to 268.75

    2021-09-20 19:24:07 chain = 1 set freq to 268.75

    2021-09-20 19:24:07 chain = 2 set freq to 268.75

    2021-09-20 19:24:07 chain = 0 set freq to 275.00

    2021-09-20 19:24:07 chain = 1 set freq to 275.00

    2021-09-20 19:24:07 chain = 2 set freq to 275.00

    2021-09-20 19:24:08 chain = 0 set freq to 281.25

    2021-09-20 19:24:08 chain = 1 set freq to 281.25

    2021-09-20 19:24:08 chain = 2 set freq to 281.25

    2021-09-20 19:24:08 chain = 0 set freq to 287.50

    2021-09-20 19:24:08 chain = 1 set freq to 287.50

    2021-09-20 19:24:08 chain = 2 set freq to 287.50

    2021-09-20 19:24:08 chain = 0 set freq to 293.75

    2021-09-20 19:24:08 chain = 1 set freq to 293.75

    2021-09-20 19:24:08 chain = 2 set freq to 293.75

    2021-09-20 19:24:08 chain = 0 set freq to 300.00

    2021-09-20 19:24:08 chain = 1 set freq to 300.00

    2021-09-20 19:24:08 chain = 2 set freq to 300.00

    2021-09-20 19:24:08 chain = 0 set freq to 306.25

    2021-09-20 19:24:08 chain = 1 set freq to 306.25

    2021-09-20 19:24:08 chain = 2 set freq to 306.25

    2021-09-20 19:24:08 chain = 0 set freq to 312.50

    2021-09-20 19:24:08 chain = 1 set freq to 312.50

    2021-09-20 19:24:08 chain = 2 set freq to 312.50

    2021-09-20 19:24:08 chain = 0 set freq to 318.75

    2021-09-20 19:24:08 chain = 1 set freq to 318.75

    2021-09-20 19:24:08 chain = 2 set freq to 318.75

    2021-09-20 19:24:08 chain = 0 set freq to 325.00

    2021-09-20 19:24:08 chain = 1 set freq to 325.00

    2021-09-20 19:24:08 chain = 2 set freq to 325.00

    2021-09-20 19:24:08 chain = 0 set freq to 331.25

    2021-09-20 19:24:08 chain = 1 set freq to 331.25

    2021-09-20 19:24:08 chain = 2 set freq to 331.25

    2021-09-20 19:24:08 chain = 0 set freq to 337.50

    2021-09-20 19:24:08 chain = 1 set freq to 337.50

    2021-09-20 19:24:08 chain = 2 set freq to 337.50

    2021-09-20 19:24:09 chain = 0 set freq to 343.75

    2021-09-20 19:24:09 chain = 1 set freq to 343.75

    2021-09-20 19:24:09 chain = 2 set freq to 343.75

    2021-09-20 19:24:09 chain = 0 set freq to 350.00

    2021-09-20 19:24:09 chain = 1 set freq to 350.00

    2021-09-20 19:24:09 chain = 2 set freq to 350.00

    2021-09-20 19:24:09 chain = 0 set freq to 356.25

    2021-09-20 19:24:09 chain = 1 set freq to 356.25

    2021-09-20 19:24:09 chain = 2 set freq to 356.25

    2021-09-20 19:24:09 chain = 0 set freq to 362.50

    2021-09-20 19:24:09 chain = 1 set freq to 362.50

    2021-09-20 19:24:09 chain = 2 set freq to 362.50

    2021-09-20 19:24:09 chain = 0 set freq to 368.75

    2021-09-20 19:24:09 chain = 1 set freq to 368.75

    2021-09-20 19:24:09 chain = 2 set freq to 368.75

    2021-09-20 19:24:09 chain = 0 set freq to 375.00

    2021-09-20 19:24:09 chain = 1 set freq to 375.00

    2021-09-20 19:24:09 chain = 2 set freq to 375.00

    2021-09-20 19:24:09 chain = 0 set freq to 381.25

    2021-09-20 19:24:09 chain = 1 set freq to 381.25

    2021-09-20 19:24:09 chain = 2 set freq to 381.25

    2021-09-20 19:24:09 chain = 0 set freq to 387.50

    2021-09-20 19:24:09 chain = 1 set freq to 387.50

    2021-09-20 19:24:09 chain = 2 set freq to 387.50

    2021-09-20 19:24:09 chain = 0 set freq to 393.75

    2021-09-20 19:24:09 chain = 1 set freq to 393.75

    2021-09-20 19:24:09 chain = 2 set freq to 393.75

    2021-09-20 19:24:09 chain = 0 set freq to 400.00

    2021-09-20 19:24:09 chain = 1 set freq to 400.00

    2021-09-20 19:24:09 chain = 2 set freq to 400.00

    2021-09-20 19:24:10 chain = 0 set freq to 406.25

    2021-09-20 19:24:10 chain = 1 set freq to 406.25

    2021-09-20 19:24:10 chain = 2 set freq to 406.25

    2021-09-20 19:24:10 chain = 0 set freq to 412.50

    2021-09-20 19:24:10 chain = 1 set freq to 412.50

    2021-09-20 19:24:10 chain = 2 set freq to 412.50

    2021-09-20 19:24:10 chain = 0 set freq to 418.75

    2021-09-20 19:24:10 chain = 1 set freq to 418.75

    2021-09-20 19:24:10 chain = 2 set freq to 418.75

    2021-09-20 19:24:10 chain = 0 set freq to 425.00

    2021-09-20 19:24:10 chain = 1 set freq to 425.00

    2021-09-20 19:24:10 chain = 2 set freq to 425.00

    2021-09-20 19:24:10 chain = 0 set freq to 431.25

    2021-09-20 19:24:10 chain = 1 set freq to 431.25

    2021-09-20 19:24:10 chain = 2 set freq to 431.25

    2021-09-20 19:24:10 chain = 0 set freq to 437.50

    2021-09-20 19:24:10 chain = 1 set freq to 437.50

    2021-09-20 19:24:10 chain = 2 set freq to 437.50

    2021-09-20 19:24:10 chain = 0 set freq to 443.75

    2021-09-20 19:24:10 chain = 1 set freq to 443.75

    2021-09-20 19:24:10 chain = 2 set freq to 443.75

    2021-09-20 19:24:10 chain = 0 set freq to 450.00

    2021-09-20 19:24:10 chain = 1 set freq to 450.00

    2021-09-20 19:24:10 chain = 2 set freq to 450.00

    2021-09-20 19:24:10 chain = 0 set freq to 456.25

    2021-09-20 19:24:10 chain = 1 set freq to 456.25

    2021-09-20 19:24:10 chain = 2 set freq to 456.25

    2021-09-20 19:24:11 chain = 0 set freq to 462.50

    2021-09-20 19:24:11 chain = 1 set freq to 462.50

    2021-09-20 19:24:11 chain = 2 set freq to 462.50

    2021-09-20 19:24:11 chain = 0 set freq to 468.75

    2021-09-20 19:24:11 chain = 1 set freq to 468.75

    2021-09-20 19:24:11 chain = 2 set freq to 468.75

    2021-09-20 19:24:11 chain = 0 set freq to 475.00

    2021-09-20 19:24:11 chain = 1 set freq to 475.00

    2021-09-20 19:24:11 chain = 2 set freq to 475.00

    2021-09-20 19:24:11 chain = 0 set freq to 481.25

    2021-09-20 19:24:11 chain = 1 set freq to 481.25

    2021-09-20 19:24:11 chain = 2 set freq to 481.25

    2021-09-20 19:24:11 chain = 0 set freq to 487.50

    2021-09-20 19:24:11 chain = 1 set freq to 487.50

    2021-09-20 19:24:11 chain = 2 set freq to 487.50

    2021-09-20 19:24:11 chain = 0 set freq to 493.75

    2021-09-20 19:24:11 chain = 1 set freq to 493.75

    2021-09-20 19:24:11 chain = 2 set freq to 493.75

    2021-09-20 19:24:11 chain = 0 set freq to 500.00

    2021-09-20 19:24:11 chain = 1 set freq to 500.00

    2021-09-20 19:24:11 chain = 2 set freq to 500.00

    2021-09-20 19:24:11 chain = 0 set freq to 506.25

    2021-09-20 19:24:11 chain = 1 set freq to 506.25

    2021-09-20 19:24:11 chain = 2 set freq to 506.25

    2021-09-20 19:24:11 chain = 0 set freq to 512.50

    2021-09-20 19:24:11 chain = 1 set freq to 512.50

    2021-09-20 19:24:11 chain = 2 set freq to 512.50

    2021-09-20 19:24:11 chain = 0 set freq to 518.75

    2021-09-20 19:24:11 chain = 1 set freq to 518.75

    2021-09-20 19:24:11 chain = 2 set freq to 518.75

    2021-09-20 19:24:12 chain = 0 set freq to 525.00

    2021-09-20 19:24:12 chain = 1 set freq to 525.00

    2021-09-20 19:24:12 chain = 2 set freq to 525.00

    2021-09-20 19:24:12 set_voltage_by_steps to 1380.

    2021-09-20 19:24:14 Init done!

    2021-09-20 19:24:14 STATUS_OKAY

    2021-09-20 19:24:14 start the cached job

    2021-09-20 19:24:14 Version num 8

    2021-09-20 19:24:14 Mask num 0xe000

    2021-09-20 19:24:14 freq = 525, percent = 90, hcn = 4993, timeout = 359

    2021-09-20 19:24:14 set_start_time_point total_tv_start_sys=341 total_tv_end_sys=342

    0
    评论操作 固定链接

    Please kindly exclude the issue by following steps:
    1. Check the wires for the hashboard--pull them and re-plug them again, and also you can try to change the new wires.
    2. Upgrade the latest firmware
    3. Reboot the miner
    4. Set miner to factory settings

    0
    评论操作 固定链接

    Dear Lisa,

    I tried already points 2,3,4. However, when I update to the latest firmware it still shows the previous firmware´s date of May.

    With regards to checking and replacing the wires for the hashboard, I would have to open the miner, please can you provide detailed instructions?

     

     

    0
    评论操作 固定链接

    BEWARE!

    DO NOT INSTALL the S19j Pro SD card recovery package.  It has BRICKED our miner!

    • Antminer-S19j-Pro-Release-sd2nand-zynq7007-20210605.zip (file size 26.87MB)
    • S19j Pro SD firmware for 7007 control board only (published 2021-08-26)

    This package is identical to the S19j package.  We have compared and match both packages' "update.bmu" file checksums.  Your miner will not be able to detect hash boards, reset to factory default firmware, or update to the Antminer-S19j-Pro-release-202106281212.bin firmware.  Effectively rendering your equipment useless.

    Bitmain support, please send the correct S19j Pro 100T (7007) recovery to niftyframes@protonmail.com

    1
    评论操作 固定链接

    Dear Lisa,

    I have tried all your suggested steps including re-plugging the hashboard wires and the miner is still not working.

    Please provide a solution to this problem. The miner has not been working for more than 3 weeks.

     

    0
    评论操作 固定链接

    Hello, if all mentioned solutions can't resolve the problem then we can only suggest to send it to repair site for maintenance.

    0
    评论操作 固定链接

    Did you manage to solve the issue ... I have the same problem... can someone solve this? We are loosing money here!

    0
    评论操作 固定链接

    Hello. . .I have the exact same issue here. Please help. My machine is brand new and it has not been online for even 1 single day.

    0
    评论操作 固定链接

请先登录再写评论。