Hash Board Problem on a New T19
已回答
Dear Support
I just got my T19 Antminer and has problem
It should do 84 Th and only makes 57 to 58 Th
in the log apeaar
2021-09-17 03:22:49 Chain[0]: find 76 asic, times 0
2021-09-17 03:22:56 Chain[1]: find 76 asic, times 0
2021-09-17 03:23:04 Chain[2]: find 0 asic, times 0
2021-09-17 03:23:11 Chain[2]: find 0 asic, times 1
2021-09-17 03:23:19 Chain[2]: find 0 asic, times 2
2021-09-17 03:23:20 Chain 2 only find 0 asic, will power off hash board 2
Please i need your help i dont know wjhat to do to solve this issue
Regards
Luis Flores
-
正式评论
Dear
For the hashboard which can not be detected ,please try to exclude the issues by the below instructions
1 Check the wire line for the hashboard,- unplug and plug them again to test.,
2.Upgrade to the latest firmware
3. Change the PSU to try it and reset the miner to the factory settings
4.Flash the SD card program to recover the control board
Please download the SD card file in the below linkhttps://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image
评论操作
请先登录再写评论。
评论
1 条评论