Large amounts of Hardware Errors on S19 Pro 110
已回答Hello,
I am having a large amount of errors on two of my S19 Pro 110s. I will post the error log of one to see if there is anyone who can tell me what might be wrong.
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209672K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19704K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090e410 (9242 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b3cda0 ( 244 kB)
.bss : 0xc0b3cda0 - 0xc0b77024 ( 233 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6632K (cd480000 - cdafa000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000006c80000
nand_read_bbt: bad block at 0x000007340000
nand_read_bbt: bad block at 0x000007400000
nand_read_bbt: bad block at 0x000007680000
nand_read_bbt: bad block at 0x0000077c0000
nand_read_bbt: bad block at 0x000007f00000
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1388653208
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 8150852F-9583-4E89-BE43-385D53964221, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 685213714
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 88D17B8E-FABB-4353-8429-03316C3E7966, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2020-12-11 11:35:43
1970-01-01 00:00:10 opt_multi_version = 1
1970-01-01 00:00:10 opt_bitmain_ab = 1
1970-01-01 00:00:10 mid_auto_gen = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5900000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 load machine NBP1901 conf
1970-01-01 00:00:10 machine : NBP1901
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
1970-01-01 00:00:16 miner ID : 8050ac267910481c
1970-01-01 00:00:16 FPGA Version = 0xB031
1970-01-01 00:00:16 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:16 ==========================capability start==========================
1970-01-01 00:00:16 board num = 3
1970-01-01 00:00:16 board id = 0, chain num = 1
1970-01-01 00:00:16 chain id = 0
1970-01-01 00:00:16 board id = 1, chain num = 1
1970-01-01 00:00:16 chain id = 1
1970-01-01 00:00:16 board id = 2, chain num = 1
1970-01-01 00:00:16 chain id = 2
1970-01-01 00:00:16 ==========================capability end============================
1970-01-01 00:00:16 chain num = 3
1970-01-01 00:00:18 [chain 0]
1970-01-01 00:00:18 0x0000 11 4A 99 D7 24 FF C5 20 18 0B E2 28 D5 14 C7 FC
1970-01-01 00:00:18 0x0010 A6 80 F5 25 DF 32 3E 12 BE 29 17 13 EF 5C A8 48
1970-01-01 00:00:18 0x0020 95 B3 5B 54 BE B4 38 96 EC 91 B4 86 6D CF B4 C2
1970-01-01 00:00:18 0x0030 CB DE DD C3 A6 CC 22 E9 51 88 83 52 32 FB E9 85
1970-01-01 00:00:18 0x0040 D5 4E 5B 95 34 08 6B 00 E1 FA FF FF FF FF FF FF
1970-01-01 00:00:18 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
1970-01-01 00:00:18
1970-01-01 00:00:20 [chain 1]
1970-01-01 00:00:20 0x0000 11 4A 0E 62 B8 BC 35 54 86 DB 88 95 F2 78 7D 2C
1970-01-01 00:00:20 0x0010 E9 AE CB F3 6D 58 7E B9 B7 3F 6B 61 5B 5D 47 8A
1970-01-01 00:00:20 0x0020 4D 6E 39 AC 69 AC 3A 7E D9 96 E6 77 81 89 CB 12
1970-01-01 00:00:20 0x0030 63 8E DE 95 22 E1 67 BD 74 ED E3 96 4A 55 B0 58
1970-01-01 00:00:20 0x0040 46 A7 0E 85 75 5E C1 F9 BA D4 FF FF FF FF FF FF
1970-01-01 00:00:20 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
1970-01-01 00:00:20
2021-09-16 12:39:34 [chain 2]
2021-09-16 12:39:34 0x0000 11 4A 1F 1E 1E 34 D3 AD 96 87 05 50 0A 0A DE 8C
2021-09-16 12:39:34 0x0010 CF 75 E5 30 32 5C 7E 78 4D 17 BE 72 1A 3B F9 09
2021-09-16 12:39:34 0x0020 F2 DB 5A A4 BE B2 E8 EC F6 B1 C1 CB 62 AF FD E2
2021-09-16 12:39:34 0x0030 4A 45 9D D6 6F 8C 03 EA 36 91 A6 4A 0A DB 84 95
2021-09-16 12:39:34 0x0040 68 05 A7 A0 C2 F8 FD 6B 4B C8 FF FF FF FF FF FF
2021-09-16 12:39:34 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 12:39:34 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 12:39:34 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 12:39:34 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 12:39:34 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 12:39:34 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 12:39:34 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 12:39:34 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 12:39:34 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 12:39:34 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 12:39:34 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
2021-09-16 12:39:34
2021-09-16 12:39:34 fan_eft : 0 fan_pwm : 100
2021-09-16 12:39:34 create thread
2021-09-16 12:39:34 fixed working voltage = 1260
2021-09-16 12:39:34 Chain [0] PCB Version: 0x011e
2021-09-16 12:39:34 Chain [0] BOM Version: 0x0100
2021-09-16 12:39:34 Chain [1] PCB Version: 0x011e
2021-09-16 12:39:34 Chain [1] BOM Version: 0x0100
2021-09-16 12:39:34 Chain [2] PCB Version: 0x011e
2021-09-16 12:39:34 Chain [2] BOM Version: 0x0100
2021-09-16 12:39:36 Fan check passed.
2021-09-16 12:39:37 chain[0] PIC jump to app
2021-09-16 12:39:38 Check chain[0] PIC fw version=0x89
2021-09-16 12:39:39 chain[1] PIC jump to app
2021-09-16 12:39:41 Check chain[1] PIC fw version=0x89
2021-09-16 12:39:42 chain[2] PIC jump to app
2021-09-16 12:39:44 Check chain[2] PIC fw version=0x89
2021-09-16 12:39:44 create thread
2021-09-16 12:39:44 max sensor num = 4
2021-09-16 12:39:44 temperature_monitor_thread start...
2021-09-16 12:39:48 power type version: 0x0071
2021-09-16 12:39:48 Enter sleep to make sure power release finish.
2021-09-16 12:41:53 reload pool, need recalculate
2021-09-16 12:41:53 set_start_time_point total_tv_start_sys=162 total_tv_end_sys=163
2021-09-16 12:42:49 Slept 180 seconds, diff = 6.
2021-09-16 12:42:49 set_voltage_by_steps to 1500.
2021-09-16 12:42:54 start up min temp by 75a = 23
2021-09-16 12:42:54 set UART baud to 115200
2021-09-16 12:43:02 Chain[0]: find 114 asic, times 0
2021-09-16 12:43:04 chain avg vol rise to 15.27
2021-09-16 12:43:10 Chain[1]: find 114 asic, times 0
2021-09-16 12:43:17 Chain[2]: find 114 asic, times 0
2021-09-16 12:43:17 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 1
2021-09-16 12:43:22 min freq in eeprom = 525
2021-09-16 12:43:22 fixed frequency is 525
2021-09-16 12:43:22 Bring up temperature is 23
2021-09-16 12:43:22 set UART baud to 12000000
2021-09-16 12:43:23 set_voltage_by_steps to 1260.
2021-09-16 12:43:30 STATUS_INITED: soc init done!
2021-09-16 12:43:30 create thread
2021-09-16 12:43:30 create thread
2021-09-16 12:43:31 start to init...
2021-09-16 12:43:39 Init done!
2021-09-16 12:43:39 STATUS_OKAY
2021-09-16 12:43:39 start the cached job
2021-09-16 12:43:39 Version num 8
2021-09-16 12:43:39 Mask num 0xe000
2021-09-16 12:43:39 freq = 525, percent = 90, hcn = 12480, timeout = 449
2021-09-16 12:43:39 set_start_time_point total_tv_start_sys=268 total_tv_end_sys=269
2021-09-16 13:32:38 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
2021-09-16 13:32:39 This is fix-freq version
2021-09-16 13:32:39 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
2021-09-16 13:32:39 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2020-12-11 11:35:43
2021-09-16 13:32:39 opt_multi_version = 1
2021-09-16 13:32:39 opt_bitmain_ab = 1
2021-09-16 13:32:39 mid_auto_gen = 0
2021-09-16 13:32:39 opt_bitmain_work_mode = 1
2021-09-16 13:32:39 mmap fpga_mem_addr_hal = 0xb5800000
2021-09-16 13:32:39 HASH_ON_PLUG V9 = 0x7
2021-09-16 13:32:39 Note: front fan is power on!
2021-09-16 13:32:39 Note: rear fan is power on!
2021-09-16 13:32:39 start the http log.
2021-09-16 13:32:39 httpListenThread start ret=0
2021-09-16 13:32:39 start listen on 6060 ...
2021-09-16 13:32:39 load machine NBP1901 conf
2021-09-16 13:32:39 machine : NBP1901
2021-09-16 13:32:39 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
2021-09-16 13:32:45 miner ID : 8050ac267910481c
2021-09-16 13:32:45 FPGA Version = 0xB031
2021-09-16 13:32:45 HASH_ON_PLUG V9 = 0x7
2021-09-16 13:32:45 ==========================capability start==========================
2021-09-16 13:32:45 board num = 3
2021-09-16 13:32:45 board id = 0, chain num = 1
2021-09-16 13:32:45 chain id = 0
2021-09-16 13:32:45 board id = 1, chain num = 1
2021-09-16 13:32:45 chain id = 1
2021-09-16 13:32:45 board id = 2, chain num = 1
2021-09-16 13:32:45 chain id = 2
2021-09-16 13:32:45 ==========================capability end============================
2021-09-16 13:32:45 chain num = 3
2021-09-16 13:32:46 [chain 0]
2021-09-16 13:32:46 0x0000 11 4A 99 D7 24 FF C5 20 18 0B E2 28 D5 14 C7 FC
2021-09-16 13:32:46 0x0010 A6 80 F5 25 DF 32 3E 12 BE 29 17 13 EF 5C A8 48
2021-09-16 13:32:46 0x0020 95 B3 5B 54 BE B4 38 96 EC 91 B4 86 6D CF B4 C2
2021-09-16 13:32:46 0x0030 CB DE DD C3 A6 CC 22 E9 51 88 83 52 32 FB E9 85
2021-09-16 13:32:46 0x0040 D5 4E 5B 95 34 08 6B 00 E1 FA FF FF FF FF FF FF
2021-09-16 13:32:46 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:46 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:46 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:46 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:46 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:46 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:46 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:46 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:46 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:46 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:46 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
2021-09-16 13:32:46
2021-09-16 13:32:48 [chain 1]
2021-09-16 13:32:48 0x0000 11 4A 0E 62 B8 BC 35 54 86 DB 88 95 F2 78 7D 2C
2021-09-16 13:32:48 0x0010 E9 AE CB F3 6D 58 7E B9 B7 3F 6B 61 5B 5D 47 8A
2021-09-16 13:32:48 0x0020 4D 6E 39 AC 69 AC 3A 7E D9 96 E6 77 81 89 CB 12
2021-09-16 13:32:48 0x0030 63 8E DE 95 22 E1 67 BD 74 ED E3 96 4A 55 B0 58
2021-09-16 13:32:48 0x0040 46 A7 0E 85 75 5E C1 F9 BA D4 FF FF FF FF FF FF
2021-09-16 13:32:48 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:48 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:48 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:48 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:48 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:48 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:48 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:48 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:48 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:48 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:48 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
2021-09-16 13:32:48
2021-09-16 13:32:50 [chain 2]
2021-09-16 13:32:50 0x0000 11 4A 1F 1E 1E 34 D3 AD 96 87 05 50 0A 0A DE 8C
2021-09-16 13:32:50 0x0010 CF 75 E5 30 32 5C 7E 78 4D 17 BE 72 1A 3B F9 09
2021-09-16 13:32:50 0x0020 F2 DB 5A A4 BE B2 E8 EC F6 B1 C1 CB 62 AF FD E2
2021-09-16 13:32:50 0x0030 4A 45 9D D6 6F 8C 03 EA 36 91 A6 4A 0A DB 84 95
2021-09-16 13:32:50 0x0040 68 05 A7 A0 C2 F8 FD 6B 4B C8 FF FF FF FF FF FF
2021-09-16 13:32:50 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:50 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:50 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:50 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:50 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:50 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:50 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:50 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:50 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:50 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 13:32:50 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
2021-09-16 13:32:50
2021-09-16 13:32:50 fan_eft : 0 fan_pwm : 100
2021-09-16 13:32:50 create thread
2021-09-16 13:32:50 fixed working voltage = 1260
2021-09-16 13:32:50 Chain [0] PCB Version: 0x011e
2021-09-16 13:32:50 Chain [0] BOM Version: 0x0100
2021-09-16 13:32:50 Chain [1] PCB Version: 0x011e
2021-09-16 13:32:50 Chain [1] BOM Version: 0x0100
2021-09-16 13:32:50 Chain [2] PCB Version: 0x011e
2021-09-16 13:32:50 Chain [2] BOM Version: 0x0100
2021-09-16 13:32:52 Fan check passed.
2021-09-16 13:32:53 chain[0] PIC jump to app
2021-09-16 13:32:54 Check chain[0] PIC fw version=0x89
2021-09-16 13:32:56 chain[1] PIC jump to app
2021-09-16 13:32:57 Check chain[1] PIC fw version=0x89
2021-09-16 13:32:58 chain[2] PIC jump to app
2021-09-16 13:33:00 Check chain[2] PIC fw version=0x89
2021-09-16 13:33:00 create thread
2021-09-16 13:33:00 max sensor num = 4
2021-09-16 13:33:00 temperature_monitor_thread start...
2021-09-16 13:33:04 power type version: 0x0071
2021-09-16 13:33:04 Enter sleep to make sure power release finish.
2021-09-16 13:33:19 chain avg vol drop to 1.18
2021-09-16 13:36:05 Slept 180 seconds, diff = 9.
2021-09-16 13:36:05 set_voltage_by_steps to 1500.
2021-09-16 13:36:10 start up min temp by 75a = 24
2021-09-16 13:36:10 set UART baud to 115200
2021-09-16 13:36:18 Chain[0]: find 114 asic, times 0
2021-09-16 13:36:20 chain avg vol rise to 15.29
2021-09-16 13:36:26 Chain[1]: find 114 asic, times 0
2021-09-16 13:36:34 Chain[2]: find 114 asic, times 0
2021-09-16 13:36:34 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 1
2021-09-16 13:36:38 min freq in eeprom = 525
2021-09-16 13:36:38 fixed frequency is 525
2021-09-16 13:36:41 Bring up temperature is 24
2021-09-16 13:36:41 set UART baud to 12000000
2021-09-16 13:36:42 set_voltage_by_steps to 1260.
2021-09-16 13:36:47 chain avg vol drop to 1.33
2021-09-16 13:36:49 STATUS_INITED: soc init done!
2021-09-16 13:36:49 create thread
2021-09-16 13:36:49 create thread
2021-09-16 13:36:51 start to init...
2021-09-16 13:36:59 Init done!
2021-09-16 13:36:59 STATUS_OKAY
2021-09-16 13:36:59 start the cached job
2021-09-16 13:36:59 Version num 8
2021-09-16 13:36:59 Mask num 0xe000
2021-09-16 13:36:59 freq = 525, percent = 90, hcn = 12480, timeout = 449
2021-09-16 13:36:59 set_start_time_point total_tv_start_sys=3468 total_tv_end_sys=3469
2021-09-16 14:06:49 avg rate is lower than ideal rate, 0.00 in 87 mins
2021-09-16 14:18:34 reload pool, need recalculate
2021-09-16 14:18:34 set_start_time_point total_tv_start_sys=5963 total_tv_end_sys=5964
2021-09-16 14:20:04 ****power off hashboard****
2021-09-16 14:20:09 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
2021-09-16 14:20:10 This is fix-freq version
2021-09-16 14:20:10 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
2021-09-16 14:20:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2020-12-11 11:35:43
2021-09-16 14:20:10 opt_multi_version = 1
2021-09-16 14:20:10 opt_bitmain_ab = 1
2021-09-16 14:20:10 mid_auto_gen = 0
2021-09-16 14:20:10 opt_bitmain_work_mode = 0
2021-09-16 14:20:10 mmap fpga_mem_addr_hal = 0xb5800000
2021-09-16 14:20:10 HASH_ON_PLUG V9 = 0x7
2021-09-16 14:20:10 Note: front fan is power on!
2021-09-16 14:20:10 Note: rear fan is power on!
2021-09-16 14:20:10 start the http log.
2021-09-16 14:20:10 httpListenThread start ret=0
2021-09-16 14:20:10 start listen on 6060 ...
2021-09-16 14:20:10 load machine NBP1901 conf
2021-09-16 14:20:10 machine : NBP1901
2021-09-16 14:20:10 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
2021-09-16 14:20:16 miner ID : 8050ac267910481c
2021-09-16 14:20:16 FPGA Version = 0xB031
2021-09-16 14:20:16 HASH_ON_PLUG V9 = 0x7
2021-09-16 14:20:16 ==========================capability start==========================
2021-09-16 14:20:16 board num = 3
2021-09-16 14:20:16 board id = 0, chain num = 1
2021-09-16 14:20:16 chain id = 0
2021-09-16 14:20:16 board id = 1, chain num = 1
2021-09-16 14:20:16 chain id = 1
2021-09-16 14:20:16 board id = 2, chain num = 1
2021-09-16 14:20:16 chain id = 2
2021-09-16 14:20:16 ==========================capability end============================
2021-09-16 14:20:16 chain num = 3
2021-09-16 14:20:18 [chain 0]
2021-09-16 14:20:18 0x0000 11 4A 99 D7 24 FF C5 20 18 0B E2 28 D5 14 C7 FC
2021-09-16 14:20:18 0x0010 A6 80 F5 25 DF 32 3E 12 BE 29 17 13 EF 5C A8 48
2021-09-16 14:20:18 0x0020 95 B3 5B 54 BE B4 38 96 EC 91 B4 86 6D CF B4 C2
2021-09-16 14:20:18 0x0030 CB DE DD C3 A6 CC 22 E9 51 88 83 52 32 FB E9 85
2021-09-16 14:20:18 0x0040 D5 4E 5B 95 34 08 6B 00 E1 FA FF FF FF FF FF FF
2021-09-16 14:20:18 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:18 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:18 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:18 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:18 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:18 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:18 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:18 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:18 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:18 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:18 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
2021-09-16 14:20:18
2021-09-16 14:20:19 [chain 1]
2021-09-16 14:20:19 0x0000 11 4A 0E 62 B8 BC 35 54 86 DB 88 95 F2 78 7D 2C
2021-09-16 14:20:19 0x0010 E9 AE CB F3 6D 58 7E B9 B7 3F 6B 61 5B 5D 47 8A
2021-09-16 14:20:19 0x0020 4D 6E 39 AC 69 AC 3A 7E D9 96 E6 77 81 89 CB 12
2021-09-16 14:20:19 0x0030 63 8E DE 95 22 E1 67 BD 74 ED E3 96 4A 55 B0 58
2021-09-16 14:20:19 0x0040 46 A7 0E 85 75 5E C1 F9 BA D4 FF FF FF FF FF FF
2021-09-16 14:20:19 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:19 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:19 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:19 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:19 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:19 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:19 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:19 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:19 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:19 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:19 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
2021-09-16 14:20:19
2021-09-16 14:20:21 [chain 2]
2021-09-16 14:20:21 0x0000 11 4A 1F 1E 1E 34 D3 AD 96 87 05 50 0A 0A DE 8C
2021-09-16 14:20:21 0x0010 CF 75 E5 30 32 5C 7E 78 4D 17 BE 72 1A 3B F9 09
2021-09-16 14:20:21 0x0020 F2 DB 5A A4 BE B2 E8 EC F6 B1 C1 CB 62 AF FD E2
2021-09-16 14:20:21 0x0030 4A 45 9D D6 6F 8C 03 EA 36 91 A6 4A 0A DB 84 95
2021-09-16 14:20:21 0x0040 68 05 A7 A0 C2 F8 FD 6B 4B C8 FF FF FF FF FF FF
2021-09-16 14:20:21 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:21 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:21 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:21 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:21 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:21 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:21 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:21 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:21 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:21 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-09-16 14:20:21 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
2021-09-16 14:20:21
2021-09-16 14:20:21 fan_eft : 0 fan_pwm : 100
2021-09-16 14:20:21 create thread
2021-09-16 14:20:21 fixed working voltage = 1260
2021-09-16 14:20:21 Chain [0] PCB Version: 0x011e
2021-09-16 14:20:21 Chain [0] BOM Version: 0x0100
2021-09-16 14:20:21 Chain [1] PCB Version: 0x011e
2021-09-16 14:20:21 Chain [1] BOM Version: 0x0100
2021-09-16 14:20:21 Chain [2] PCB Version: 0x011e
2021-09-16 14:20:21 Chain [2] BOM Version: 0x0100
2021-09-16 14:20:23 Fan check passed.
2021-09-16 14:20:24 chain[0] PIC jump to app
2021-09-16 14:20:26 Check chain[0] PIC fw version=0x89
2021-09-16 14:20:27 chain[1] PIC jump to app
2021-09-16 14:20:28 Check chain[1] PIC fw version=0x89
2021-09-16 14:20:29 chain[2] PIC jump to app
2021-09-16 14:20:31 Check chain[2] PIC fw version=0x89
2021-09-16 14:20:31 create thread
2021-09-16 14:20:31 max sensor num = 4
2021-09-16 14:20:31 temperature_monitor_thread start...
2021-09-16 14:20:35 power type version: 0x0071
2021-09-16 14:20:35 Enter sleep to make sure power release finish.
2021-09-16 14:21:06 Slept 30 seconds, diff = 1.
2021-09-16 14:21:06 set_voltage_by_steps to 1500.
2021-09-16 14:21:12 start up min temp by 75a = 22
2021-09-16 14:21:12 set UART baud to 115200
2021-09-16 14:21:16 chain avg vol rise to 15.28
2021-09-16 14:21:20 Chain[0]: find 114 asic, times 0
2021-09-16 14:21:28 Chain[1]: find 114 asic, times 0
2021-09-16 14:21:35 Chain[2]: find 114 asic, times 0
2021-09-16 14:21:35 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 1
2021-09-16 14:21:40 min freq in eeprom = 525
2021-09-16 14:21:40 fixed frequency is 525
2021-09-16 14:21:40 Bring up temperature is 22
2021-09-16 14:21:40 set UART baud to 12000000
2021-09-16 14:21:40 set_voltage_by_steps to 1260.
2021-09-16 14:21:47 STATUS_INITED: soc init done!
2021-09-16 14:21:47 create thread
2021-09-16 14:21:47 create thread
2021-09-16 14:21:50 start to init...
2021-09-16 14:21:58 Init done!
2021-09-16 14:21:58 STATUS_OKAY
2021-09-16 14:21:58 start the cached job
2021-09-16 14:21:58 Version num 8
2021-09-16 14:21:58 Mask num 0xe000
2021-09-16 14:21:58 freq = 525, percent = 90, hcn = 12480, timeout = 449
2021-09-16 14:21:58 set_start_time_point total_tv_start_sys=6167 total_tv_end_sys=6168
-
正式评论
Dear
We checked the voltage is abnormal ,could you unplug-and plug the power line to double check it .
评论操作 -
Good afternoon,
I am checking the voltage on the two miners now. I can't see how it could be a power problem, as I am running S19j Pro 104's off the same setup with next to 0 errors. But I am willing to try anything to fix the issue.
Could you point out where in the kernel log the voltage seems abnormal. I would like to narrow down my troubleshooting if I can.
- J
-
Hello,
Yes I have unplugged and plugged back in the power. Ran the machine for another 6 hours, errors still very high. I have checked the power cables and the power coming from the main to the machine. All is fine.
I have taken the miner and plugged it at a different location with different power altogether. I am still getting the same large amounts of hardware errors.
Would it be possible to point out where in the kernel code the error on voltage is.
-J
-
we suggest you reboot the miner
Information for you:
https://support.bitmain.com/hc/en-us/articles/115000211033-How-to-power-off-reboot-or-restart-the-miner
请先登录再写评论。
评论
5 条评论