URGENT. MY ANTMINER DR5 SHOWS 0 ASIC AND TEMP SENSOR NOT WORKING

HERE IS THE FULL KERNEL LOG.

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-ge7a4d3a-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #38 SMP PREEMPT Fri Aug 24 11:14:38 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0938d00, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 206016K/245760K available (5317K kernel code, 230K rwdata, 1844K rodata, 1024K init, 222K bss, 23360K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc07fe410 (8154 kB)
.init : 0xc0800000 - 0xc0900000 (1024 kB)
.data : 0xc0900000 - 0xc0939a60 ( 231 kB)
.bss : 0xc0939a60 - 0xc09713e8 ( 223 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12368K (cceec000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
5 ofpart partitions found on MTD device pl35x-nand
Creating 5 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0800000 - c0900000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcf99c000
*base_vir_addr = 0xab002
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
hrtimer: interrupt took 27780 ns
random: nonblocking pool is initialized
Sep 14 23:45:47 (none) local0.err cgminer: Miner compile time: Fri Mar 1 12:29:06 CST 2019 type: Antminer DR5
Sep 14 23:45:47 (none) local0.warn cgminer: Started cgminer 4.9.0
Sep 14 23:45:47 (none) local0.notice cgminer[958]: bitmain_dcr_prepare, working in low power mode. frequency 450MHz.
Sep 14 23:45:47 (none) local0.warn cgminer[958]: mmap axi_fpga_addr = 0xb6fb1000
Sep 14 23:45:47 (none) local0.warn cgminer[958]: axi_fpga_addr data = 0xb002
Sep 14 23:45:47 (none) local0.warn cgminer[958]: mmap fpga_mem_addr = 0xb5d55000
Sep 14 23:45:47 (none) local0.warn cgminer[958]: bitmain_dcr_init
Sep 14 23:45:47 (none) local0.notice cgminer[958]: Begain check_fan_speed
Sep 14 23:45:50 (none) local0.notice cgminer[958]: check_fan_speed, check_fan_speed ok, dev.fan_num = 2
Sep 14 23:45:50 (none) local0.notice cgminer[958]: detected chain 0
Sep 14 23:45:50 (none) local0.notice cgminer[958]: detected chain 1
Sep 14 23:45:50 (none) local0.notice cgminer[958]: detected chain 2
Sep 14 23:45:50 (none) local0.warn cgminer[958]: detect total chain num 3
Sep 14 23:45:50 (none) local0.notice cgminer[958]: power check ...
Sep 14 23:45:50 (none) local0.notice cgminer[958]: power protocal f5, using package cmd
Sep 14 23:45:50 (none) local0.notice cgminer[958]: power check OK!
Sep 14 23:45:50 (none) local0.notice cgminer[958]: power on!
Sep 14 23:45:50 (none) local0.notice cgminer[958]: init gpio907
Sep 14 23:45:51 (none) local0.notice cgminer[958]: every_chain_reset_PIC16F1704_pic_new
Sep 14 23:45:53 (none) local0.notice cgminer[958]: reset_PIC16F1704_pic_new ok
Sep 14 23:45:54 (none) local0.notice cgminer[958]: reset_PIC16F1704_pic_new ok
Sep 14 23:45:55 (none) local0.notice cgminer[958]: reset_PIC16F1704_pic_new ok
Sep 14 23:45:56 (none) local0.notice cgminer[958]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Sep 14 23:45:56 (none) local0.notice cgminer[958]: jump_from_loader_to_app_PIC16F1704_new ok
Sep 14 23:45:57 (none) local0.notice cgminer[958]: jump_from_loader_to_app_PIC16F1704_new ok
Sep 14 23:45:57 (none) local0.notice cgminer[958]: jump_from_loader_to_app_PIC16F1704_new ok
Sep 14 23:45:58 (none) local0.notice cgminer[958]: power_set_da_value, 55, aa, 06, 83, f9, 00, 82, 01
Sep 14 23:45:58 (none) local0.notice cgminer[958]: pic_heart_beat_func_new
Sep 14 23:45:59 (none) local0.notice cgminer[958]: power_send_cmd, reply_buf[0]=55
Sep 14 23:45:59 (none) local0.notice cgminer[958]: power_send_cmd, reply_buf[1]=aa
Sep 14 23:45:59 (none) local0.notice cgminer[958]: power_send_cmd, reply_buf[2]=06
Sep 14 23:45:59 (none) local0.notice cgminer[958]: power_send_cmd, reply_buf[3]=83
Sep 14 23:45:59 (none) local0.notice cgminer[958]: power_send_cmd, reply_buf[4]=f9
Sep 14 23:45:59 (none) local0.notice cgminer[958]: power_send_cmd, reply_buf[5]=00
Sep 14 23:45:59 (none) local0.notice cgminer[958]: power_send_cmd, reply_buf[6]=82
Sep 14 23:46:00 (none) local0.notice cgminer[958]: power_send_cmd, reply_buf[7]=01
Sep 14 23:46:00 (none) local0.notice cgminer[958]: bitmain_dcr_init, dev.voltage=800, pic_voltage=249
Sep 14 23:46:00 (none) local0.notice cgminer[958]: chain 0 eeprom test pass
Sep 14 23:46:00 (none) local0.notice cgminer[958]: chain 1 eeprom test pass
Sep 14 23:46:00 (none) local0.notice cgminer[958]: chain 2 eeprom test pass
Sep 14 23:46:00 (none) local0.notice cgminer[958]: chain 0 eeprom mh(0x55 0xaa) lp vol 80 freq 60 vol 89 crc5 0x08
Sep 14 23:46:00 (none) local0.notice cgminer[958]: chain 1 eeprom mh(0x55 0xaa) lp vol 80 freq 60 vol 87 crc5 0x1b
Sep 14 23:46:00 (none) local0.notice cgminer[958]: chain 2 eeprom mh(0x55 0xaa) lp vol 80 freq 60 vol 89 crc5 0x08
Sep 14 23:46:00 (none) local0.notice cgminer[958]: chain 0 read out low power voltage data 80 voltagge 800
Sep 14 23:46:00 (none) local0.notice cgminer[958]: chain 1 read out low power voltage data 80 voltagge 800
Sep 14 23:46:00 (none) local0.notice cgminer[958]: chain 2 read out low power voltage data 80 voltagge 800
Sep 14 23:46:00 (none) local0.notice cgminer[958]: every_chain_enable_PIC16F1704_dc_dc_new
Sep 14 23:46:01 (none) local0.notice cgminer[958]: enable_PIC16F1704_dc_dc_new ok
Sep 14 23:46:01 (none) local0.notice cgminer[958]: enable_PIC16F1704_dc_dc_new ok
Sep 14 23:46:01 (none) local0.notice cgminer[958]: enable_PIC16F1704_dc_dc_new ok
Sep 14 23:46:02 (none) local0.notice cgminer[958]: tty_init
Sep 14 23:46:02 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:02 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:02 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:02 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:02 (none) local0.err cgminer[958]: create rx read thread for chain 0
Sep 14 23:46:02 (none) local0.err cgminer[958]: create rx read thread for chain 0 ok
Sep 14 23:46:02 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[0]
Sep 14 23:46:02 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:02 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:02 (none) local0.err cgminer[958]: create rx read thread for chain 1
Sep 14 23:46:02 (none) local0.err cgminer[958]: create rx read thread for chain 1 ok
Sep 14 23:46:02 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[1]
Sep 14 23:46:02 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:02 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:02 (none) local0.err cgminer[958]: create rx read thread for chain 2
Sep 14 23:46:02 (none) local0.err cgminer[958]: create rx read thread for chain 2 ok
Sep 14 23:46:02 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[2]
Sep 14 23:46:02 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:02 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:02 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:02 (none) local0.notice cgminer[958]: IO Thread #b39ff470 using high-priority scheduler!
Sep 14 23:46:03 (none) local0.notice cgminer[958]: check_every_chain_asic_number
Sep 14 23:46:03 (none) local0.warn cgminer[958]: check_asic_reg: Chain0 has 0 ASICs
Sep 14 23:46:03 (none) local0.warn cgminer[958]: check_asic_reg: Chain1 has 0 ASICs
Sep 14 23:46:03 (none) local0.warn cgminer[958]: check_asic_reg: Chain2 has 0 ASICs
Sep 14 23:46:04 (none) local0.notice cgminer[958]: power off!
Sep 14 23:46:05 (none) local0.notice cgminer[958]: power on!
Sep 14 23:46:07 (none) local0.notice cgminer[958]: tty_init
Sep 14 23:46:07 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:07 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:07 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:07 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:07 (none) local0.err cgminer[958]: create rx read thread for chain 0
Sep 14 23:46:07 (none) local0.err cgminer[958]: create rx read thread for chain 0 ok
Sep 14 23:46:07 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[0]
Sep 14 23:46:07 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:07 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:07 (none) local0.err cgminer[958]: create rx read thread for chain 1
Sep 14 23:46:07 (none) local0.err cgminer[958]: create rx read thread for chain 1 ok
Sep 14 23:46:07 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[1]
Sep 14 23:46:07 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:07 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:07 (none) local0.err cgminer[958]: create rx read thread for chain 2
Sep 14 23:46:07 (none) local0.err cgminer[958]: create rx read thread for chain 2 ok
Sep 14 23:46:07 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[2]
Sep 14 23:46:08 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:08 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:08 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:08 (none) local0.notice cgminer[958]: IO Thread #b29ff470 using high-priority scheduler!
Sep 14 23:46:08 (none) local0.notice cgminer[958]: tty_init
Sep 14 23:46:08 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:08 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:08 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:08 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:08 (none) local0.err cgminer[958]: create rx read thread for chain 0
Sep 14 23:46:08 (none) local0.err cgminer[958]: create rx read thread for chain 0 ok
Sep 14 23:46:08 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[0]
Sep 14 23:46:08 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:08 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:08 (none) local0.err cgminer[958]: create rx read thread for chain 1
Sep 14 23:46:08 (none) local0.err cgminer[958]: create rx read thread for chain 1 ok
Sep 14 23:46:08 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[1]
Sep 14 23:46:08 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:08 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:08 (none) local0.err cgminer[958]: create rx read thread for chain 2
Sep 14 23:46:08 (none) local0.err cgminer[958]: create rx read thread for chain 2 ok
Sep 14 23:46:08 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[2]
Sep 14 23:46:08 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:08 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:08 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:08 (none) local0.notice cgminer[958]: IO Thread #b09ff470 using high-priority scheduler!
Sep 14 23:46:08 (none) local0.notice cgminer[958]: tty_init
Sep 14 23:46:08 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:08 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:08 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:08 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:08 (none) local0.err cgminer[958]: create rx read thread for chain 0
Sep 14 23:46:08 (none) local0.err cgminer[958]: create rx read thread for chain 0 ok
Sep 14 23:46:08 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[0]
Sep 14 23:46:08 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:08 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:08 (none) local0.err cgminer[958]: create rx read thread for chain 1
Sep 14 23:46:08 (none) local0.err cgminer[958]: create rx read thread for chain 1 ok
Sep 14 23:46:08 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[1]
Sep 14 23:46:08 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:08 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:08 (none) local0.err cgminer[958]: create rx read thread for chain 2
Sep 14 23:46:08 (none) local0.err cgminer[958]: create rx read thread for chain 2 ok
Sep 14 23:46:08 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[2]
Sep 14 23:46:08 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:08 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:08 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:08 (none) local0.notice cgminer[958]: IO Thread #ae9ff470 using high-priority scheduler!
Sep 14 23:46:08 (none) local0.notice cgminer[958]: check_every_chain_asic_number
Sep 14 23:46:08 (none) local0.warn cgminer[958]: check_asic_reg: Chain0 has 0 ASICs
Sep 14 23:46:09 (none) local0.warn cgminer[958]: check_asic_reg: Chain1 has 0 ASICs
Sep 14 23:46:09 (none) local0.warn cgminer[958]: check_asic_reg: Chain2 has 0 ASICs
Sep 14 23:46:09 (none) local0.notice cgminer[958]: recheck_asic_num DONE!
Sep 14 23:46:09 (none) local0.notice cgminer[958]: power off!
Sep 14 23:46:11 (none) local0.notice cgminer[958]: power on!
Sep 14 23:46:13 (none) local0.notice cgminer[958]: tty_init
Sep 14 23:46:13 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:13 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:13 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:13 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:13 (none) local0.err cgminer[958]: create rx read thread for chain 0
Sep 14 23:46:13 (none) local0.err cgminer[958]: create rx read thread for chain 0 ok
Sep 14 23:46:13 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[0]
Sep 14 23:46:13 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:13 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:13 (none) local0.err cgminer[958]: create rx read thread for chain 1
Sep 14 23:46:13 (none) local0.err cgminer[958]: create rx read thread for chain 1 ok
Sep 14 23:46:13 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[1]
Sep 14 23:46:13 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:13 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:13 (none) local0.err cgminer[958]: create rx read thread for chain 2
Sep 14 23:46:13 (none) local0.err cgminer[958]: create rx read thread for chain 2 ok
Sep 14 23:46:13 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[2]
Sep 14 23:46:13 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:13 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:13 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:13 (none) local0.notice cgminer[958]: IO Thread #b21ff470 using high-priority scheduler!
Sep 14 23:46:13 (none) local0.notice cgminer[958]: tty_init
Sep 14 23:46:13 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:13 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:13 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:13 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:13 (none) local0.err cgminer[958]: create rx read thread for chain 0
Sep 14 23:46:13 (none) local0.err cgminer[958]: create rx read thread for chain 0 ok
Sep 14 23:46:13 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[0]
Sep 14 23:46:13 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:13 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:13 (none) local0.err cgminer[958]: create rx read thread for chain 1
Sep 14 23:46:13 (none) local0.err cgminer[958]: create rx read thread for chain 1 ok
Sep 14 23:46:13 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[1]
Sep 14 23:46:13 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:13 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:13 (none) local0.err cgminer[958]: create rx read thread for chain 2
Sep 14 23:46:13 (none) local0.err cgminer[958]: create rx read thread for chain 2 ok
Sep 14 23:46:13 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[2]
Sep 14 23:46:13 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:13 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:13 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:13 (none) local0.notice cgminer[958]: IO Thread #b19ff470 using high-priority scheduler!
Sep 14 23:46:13 (none) local0.notice cgminer[958]: tty_init
Sep 14 23:46:13 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:13 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:14 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:14 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:14 (none) local0.err cgminer[958]: create rx read thread for chain 0
Sep 14 23:46:14 (none) local0.err cgminer[958]: create rx read thread for chain 0 ok
Sep 14 23:46:14 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[0]
Sep 14 23:46:14 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:14 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:14 (none) local0.err cgminer[958]: create rx read thread for chain 1
Sep 14 23:46:14 (none) local0.err cgminer[958]: create rx read thread for chain 1 ok
Sep 14 23:46:14 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[1]
Sep 14 23:46:14 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:14 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:14 (none) local0.err cgminer[958]: create rx read thread for chain 2
Sep 14 23:46:14 (none) local0.err cgminer[958]: create rx read thread for chain 2 ok
Sep 14 23:46:14 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[2]
Sep 14 23:46:14 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:14 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:14 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:14 (none) local0.notice cgminer[958]: IO Thread #ad1ff470 using high-priority scheduler!
Sep 14 23:46:14 (none) local0.notice cgminer[958]: check_every_chain_asic_number
Sep 14 23:46:14 (none) local0.warn cgminer[958]: check_asic_reg: Chain0 has 0 ASICs
Sep 14 23:46:14 (none) local0.warn cgminer[958]: check_asic_reg: Chain1 has 0 ASICs
Sep 14 23:46:15 (none) local0.warn cgminer[958]: check_asic_reg: Chain2 has 0 ASICs
Sep 14 23:46:15 (none) local0.notice cgminer[958]: recheck_asic_num DONE!
Sep 14 23:46:15 (none) local0.notice cgminer[958]: power off!
Sep 14 23:46:16 (none) local0.notice cgminer[958]: power on!
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init
Sep 14 23:46:19 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:19 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:19 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 0
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 0 ok
Sep 14 23:46:19 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[0]
Sep 14 23:46:19 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 1
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 1 ok
Sep 14 23:46:19 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[1]
Sep 14 23:46:19 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 2
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 2 ok
Sep 14 23:46:19 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[2]
Sep 14 23:46:19 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:19 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:19 (none) local0.notice cgminer[958]: IO Thread #b53ff470 using high-priority scheduler!
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init
Sep 14 23:46:19 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:19 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:19 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 0
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 0 ok
Sep 14 23:46:19 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[0]
Sep 14 23:46:19 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 1
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 1 ok
Sep 14 23:46:19 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[1]
Sep 14 23:46:19 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 2
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 2 ok
Sep 14 23:46:19 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[2]
Sep 14 23:46:19 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:19 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:19 (none) local0.notice cgminer[958]: IO Thread #af1ff470 using high-priority scheduler!
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init
Sep 14 23:46:19 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:19 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:19 (none) local0.notice cgminer[958]: MISC_CONTROL : 7002001
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 0
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 0 ok
Sep 14 23:46:19 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[0]
Sep 14 23:46:19 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 1
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 1 ok
Sep 14 23:46:19 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[1]
Sep 14 23:46:19 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 2
Sep 14 23:46:19 (none) local0.err cgminer[958]: create rx read thread for chain 2 ok
Sep 14 23:46:19 (none) local0.notice cgminer[958]: Start A New Asic Response.Chain:[2]
Sep 14 23:46:19 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:19 (none) local0.notice cgminer[958]: tty_init_chain
Sep 14 23:46:19 (none) local0.notice cgminer[958]: open device over
Sep 14 23:46:19 (none) local0.notice cgminer[958]: IO Thread #ab9ff470 using high-priority scheduler!
Sep 14 23:46:20 (none) local0.notice cgminer[958]: check_every_chain_asic_number
Sep 14 23:46:20 (none) local0.warn cgminer[958]: check_asic_reg: Chain0 has 0 ASICs
Sep 14 23:46:20 (none) local0.warn cgminer[958]: check_asic_reg: Chain1 has 0 ASICs
Sep 14 23:46:20 (none) local0.warn cgminer[958]: check_asic_reg: Chain2 has 0 ASICs
Sep 14 23:46:21 (none) local0.notice cgminer[958]: recheck_asic_num DONE!
Sep 14 23:46:21 (none) local0.notice cgminer[958]: calculate_address_interval: temp_asic_number = 128, addrInterval = 1
Sep 14 23:46:21 (none) local0.notice cgminer[958]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 1
Sep 14 23:46:21 (none) local0.notice cgminer[958]: Now Set [0] Chain Address
Sep 14 23:46:22 (none) local0.notice cgminer[958]: software_set_address_chain: chain 1 has 0 ASIC, and addrInterval is 1
Sep 14 23:46:22 (none) local0.notice cgminer[958]: Now Set [1] Chain Address
Sep 14 23:46:22 (none) local0.notice cgminer[958]: software_set_address_chain: chain 2 has 0 ASIC, and addrInterval is 1
Sep 14 23:46:22 (none) local0.notice cgminer[958]: Now Set [2] Chain Address
Sep 14 23:46:23 (none) local0.notice cgminer[958]: check_every_chain_asic_number
Sep 14 23:46:23 (none) local0.warn cgminer[958]: check_asic_reg: Chain0 has 0 ASICs
Sep 14 23:46:23 (none) local0.warn cgminer[958]: check_asic_reg: Chain1 has 0 ASICs
Sep 14 23:46:24 (none) local0.warn cgminer[958]: check_asic_reg: Chain2 has 0 ASICs
Sep 14 23:46:24 (none) local0.notice cgminer[958]: set_ticket_mask ticket_mask = 0x00000026
Sep 14 23:46:24 (none) local0.notice cgminer[958]: set_frequency_chain: chian = 0 freq = 450.000000
Sep 14 23:46:24 (none) local0.notice cgminer[958]: set_frequency_chain: pll_param = c0b40211, divider = 04, pll_freq = 2250.000000
Sep 14 23:46:24 (none) local0.notice cgminer[958]: set_frequency_chain: chian = 1 freq = 450.000000
Sep 14 23:46:24 (none) local0.notice cgminer[958]: set_frequency_chain: pll_param = c0b40211, divider = 04, pll_freq = 2250.000000
Sep 14 23:46:24 (none) local0.notice cgminer[958]: set_frequency_chain: chian = 2 freq = 450.000000
Sep 14 23:46:24 (none) local0.notice cgminer[958]: set_frequency_chain: pll_param = c0b40211, divider = 04, pll_freq = 2250.000000
Sep 14 23:46:24 (none) local0.notice cgminer[958]: enable_read_temperature_from_asic_chain: reg_value = 0x07006061
Sep 14 23:46:24 (none) local0.notice cgminer[958]: enable_read_temperature_from_asic_chain: reg_value = 0x07006061
Sep 14 23:46:24 (none) local0.notice cgminer[958]: enable_read_temperature_from_asic_chain: reg_value = 0x07006061
Sep 14 23:46:24 (none) local0.notice cgminer[958]: select_core_to_check_temperature_chain: diode_mux_sel = 1
Sep 14 23:46:24 (none) local0.notice cgminer[958]: select_core_to_check_temperature_chain: diode_mux_sel = 1
Sep 14 23:46:24 (none) local0.notice cgminer[958]: select_core_to_check_temperature_chain: diode_mux_sel = 1
Sep 14 23:46:24 (none) local0.notice cgminer[958]: calibration_sensor_offset
Sep 14 23:46:24 (none) local0.notice cgminer[958]: 0 calibration_sensor_offset_chain
Sep 14 23:46:25 (none) local0.notice cgminer[958]: chain:0 local:0 remote:0
Sep 14 23:46:25 (none) local0.warn cgminer[958]: Chain 0 set_temperature_offset_value_chain_sensor
Sep 14 23:46:25 (none) local0.notice cgminer[958]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Sep 14 23:46:26 (none) local0.notice cgminer[958]: chain:0 local:0 remote:0
Sep 14 23:46:26 (none) local0.warn cgminer[958]: Chain 0 set_temperature_offset_value_chain_sensor
Sep 14 23:46:27 (none) local0.notice cgminer[958]: set_temperature_offset_value_chain_sensor: Chain0 Sensor1 temp offset : 00,
Sep 14 23:46:28 (none) local0.notice cgminer[958]: chain:0 local:0 remote:0
Sep 14 23:46:28 (none) local0.warn cgminer[958]: Chain 0 set_temperature_offset_value_chain_sensor
Sep 14 23:46:28 (none) local0.notice cgminer[958]: set_temperature_offset_value_chain_sensor: Chain0 Sensor2 temp offset : 00,
Sep 14 23:46:29 (none) local0.notice cgminer[958]: chain:0 local:0 remote:0
Sep 14 23:46:29 (none) local0.warn cgminer[958]: Chain 0 set_temperature_offset_value_chain_sensor
Sep 14 23:46:30 (none) local0.notice cgminer[958]: set_temperature_offset_value_chain_sensor: Chain0 Sensor3 temp offset : 00,
Sep 14 23:46:30 (none) local0.notice cgminer[958]: 1 calibration_sensor_offset_chain
Sep 14 23:46:30 (none) local0.notice cgminer[958]: chain:1 local:0 remote:0
Sep 14 23:46:30 (none) local0.warn cgminer[958]: Chain 1 set_temperature_offset_value_chain_sensor
Sep 14 23:46:31 (none) local0.notice cgminer[958]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : 00,
Sep 14 23:46:32 (none) local0.notice cgminer[958]: chain:1 local:0 remote:0
Sep 14 23:46:32 (none) local0.warn cgminer[958]: Chain 1 set_temperature_offset_value_chain_sensor
Sep 14 23:46:32 (none) local0.notice cgminer[958]: set_temperature_offset_value_chain_sensor: Chain1 Sensor1 temp offset : 00,
Sep 14 23:46:33 (none) local0.notice cgminer[958]: chain:1 local:0 remote:0
Sep 14 23:46:33 (none) local0.warn cgminer[958]: Chain 1 set_temperature_offset_value_chain_sensor
Sep 14 23:46:34 (none) local0.notice cgminer[958]: set_temperature_offset_value_chain_sensor: Chain1 Sensor2 temp offset : 00,
Sep 14 23:46:35 (none) local0.notice cgminer[958]: chain:1 local:0 remote:0
Sep 14 23:46:35 (none) local0.warn cgminer[958]: Chain 1 set_temperature_offset_value_chain_sensor
Sep 14 23:46:35 (none) local0.notice cgminer[958]: set_temperature_offset_value_chain_sensor: Chain1 Sensor3 temp offset : 00,
Sep 14 23:46:35 (none) local0.notice cgminer[958]: 2 calibration_sensor_offset_chain
Sep 14 23:46:36 (none) local0.notice cgminer[958]: chain:2 local:0 remote:0
Sep 14 23:46:36 (none) local0.warn cgminer[958]: Chain 2 set_temperature_offset_value_chain_sensor
Sep 14 23:46:37 (none) local0.notice cgminer[958]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
Sep 14 23:46:37 (none) local0.notice cgminer[958]: chain:2 local:0 remote:0
Sep 14 23:46:37 (none) local0.warn cgminer[958]: Chain 2 set_temperature_offset_value_chain_sensor
Sep 14 23:46:38 (none) local0.notice cgminer[958]: set_temperature_offset_value_chain_sensor: Chain2 Sensor1 temp offset : 00,
Sep 14 23:46:39 (none) local0.notice cgminer[958]: chain:2 local:0 remote:0
Sep 14 23:46:39 (none) local0.warn cgminer[958]: Chain 2 set_temperature_offset_value_chain_sensor
Sep 14 23:46:39 (none) local0.notice cgminer[958]: set_temperature_offset_value_chain_sensor: Chain2 Sensor2 temp offset : 00,
Sep 14 23:46:40 (none) local0.notice cgminer[958]: chain:2 local:0 remote:0
Sep 14 23:46:40 (none) local0.warn cgminer[958]: Chain 2 set_temperature_offset_value_chain_sensor
Sep 14 23:46:41 (none) local0.notice cgminer[958]: set_temperature_offset_value_chain_sensor: Chain2 Sensor3 temp offset : 00,
Sep 14 23:46:41 (none) local0.notice cgminer[958]: bitmain_dcr_init: fan_eft: 0 fan_pwm : 30
Sep 14 23:46:41 (none) local0.notice cgminer[958]: frequency = '450 timeout 13048'
Sep 14 23:47:24 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:47:25 (none) local0.err cgminer[958]: cgminer time error total_secs = 1631663245.952090 last_total_secs = 1.000000
Sep 14 23:47:25 (none) local0.warn cgminer[958]: Failed to resolve (?wrong URL) stratum+tcp://:(null)
Sep 14 23:47:25 (none) local0.warn cgminer[958]: Failed to resolve (?wrong URL) stratum+tcp://:(null)
Sep 14 23:47:28 (none) local0.notice cgminer[958]: pool diff: 46, sdiff: 16384.0000
Sep 14 23:47:33 (none) local0.warn cgminer[958]: API running in IP access mode on port 4028 (10)
Sep 14 23:47:34 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:47:45 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:47:55 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:48:06 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:48:16 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:48:26 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:48:37 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:48:47 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:48:58 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:49:08 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:49:19 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:49:29 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:49:39 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:49:50 (none) local0.notice cgminer[958]: pool diff: 45, sdiff: 8192.0000
Sep 14 23:49:50 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:50:00 (none) local0.notice cgminer[958]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:50:15 (none) local0.err cgminer: Miner compile time: Fri Mar 1 12:29:06 CST 2019 type: Antminer DR5
Sep 14 23:50:15 (none) local0.warn cgminer: Started cgminer 4.9.0
Sep 14 23:50:15 (none) local0.notice cgminer[2108]: bitmain_dcr_prepare, working in low power mode. frequency 450MHz.
Sep 14 23:50:15 (none) local0.warn cgminer[2108]: mmap axi_fpga_addr = 0xb6fe1000
Sep 14 23:50:15 (none) local0.warn cgminer[2108]: axi_fpga_addr data = 0xb002
Sep 14 23:50:15 (none) local0.warn cgminer[2108]: mmap fpga_mem_addr = 0xb5d85000
Sep 14 23:50:15 (none) local0.warn cgminer[2108]: bitmain_dcr_init
Sep 14 23:50:15 (none) local0.notice cgminer[2108]: Begain check_fan_speed
Sep 14 23:50:18 (none) local0.notice cgminer[2108]: check_fan_speed, check_fan_speed ok, dev.fan_num = 2
Sep 14 23:50:18 (none) local0.notice cgminer[2108]: detected chain 0
Sep 14 23:50:18 (none) local0.notice cgminer[2108]: detected chain 1
Sep 14 23:50:18 (none) local0.notice cgminer[2108]: detected chain 2
Sep 14 23:50:18 (none) local0.warn cgminer[2108]: detect total chain num 3
Sep 14 23:50:18 (none) local0.notice cgminer[2108]: power check ...
Sep 14 23:50:18 (none) local0.notice cgminer[2108]: power protocal f5, using package cmd
Sep 14 23:50:18 (none) local0.notice cgminer[2108]: power check OK!
Sep 14 23:50:18 (none) local0.notice cgminer[2108]: power on!
Sep 14 23:50:19 (none) local0.notice cgminer[2108]: every_chain_reset_PIC16F1704_pic_new
Sep 14 23:50:20 (none) local0.notice cgminer[2108]: reset_PIC16F1704_pic_new ok
Sep 14 23:50:22 (none) local0.notice cgminer[2108]: reset_PIC16F1704_pic_new ok
Sep 14 23:50:23 (none) local0.notice cgminer[2108]: reset_PIC16F1704_pic_new ok
Sep 14 23:50:24 (none) local0.notice cgminer[2108]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Sep 14 23:50:24 (none) local0.notice cgminer[2108]: jump_from_loader_to_app_PIC16F1704_new ok
Sep 14 23:50:24 (none) local0.notice cgminer[2108]: jump_from_loader_to_app_PIC16F1704_new ok
Sep 14 23:50:25 (none) local0.notice cgminer[2108]: jump_from_loader_to_app_PIC16F1704_new ok
Sep 14 23:50:26 (none) local0.notice cgminer[2108]: power_set_da_value, 55, aa, 06, 83, f9, 00, 82, 01
Sep 14 23:50:26 (none) local0.notice cgminer[2108]: pic_heart_beat_func_new
Sep 14 23:50:27 (none) local0.notice cgminer[2108]: power_send_cmd, reply_buf[0]=55
Sep 14 23:50:27 (none) local0.notice cgminer[2108]: power_send_cmd, reply_buf[1]=aa
Sep 14 23:50:27 (none) local0.notice cgminer[2108]: power_send_cmd, reply_buf[2]=06
Sep 14 23:50:27 (none) local0.notice cgminer[2108]: power_send_cmd, reply_buf[3]=83
Sep 14 23:50:27 (none) local0.notice cgminer[2108]: power_send_cmd, reply_buf[4]=f9
Sep 14 23:50:27 (none) local0.notice cgminer[2108]: power_send_cmd, reply_buf[5]=00
Sep 14 23:50:27 (none) local0.notice cgminer[2108]: power_send_cmd, reply_buf[6]=82
Sep 14 23:50:27 (none) local0.notice cgminer[2108]: power_send_cmd, reply_buf[7]=01
Sep 14 23:50:27 (none) local0.notice cgminer[2108]: bitmain_dcr_init, dev.voltage=800, pic_voltage=249
Sep 14 23:50:28 (none) local0.notice cgminer[2108]: chain 0 eeprom test pass
Sep 14 23:50:28 (none) local0.notice cgminer[2108]: chain 1 eeprom test pass
Sep 14 23:50:28 (none) local0.notice cgminer[2108]: chain 2 eeprom test pass
Sep 14 23:50:28 (none) local0.notice cgminer[2108]: chain 0 eeprom mh(0x55 0xaa) lp vol 80 freq 60 vol 89 crc5 0x08
Sep 14 23:50:28 (none) local0.notice cgminer[2108]: chain 1 eeprom mh(0x55 0xaa) lp vol 80 freq 60 vol 87 crc5 0x1b
Sep 14 23:50:28 (none) local0.notice cgminer[2108]: chain 2 eeprom mh(0x55 0xaa) lp vol 80 freq 60 vol 89 crc5 0x08
Sep 14 23:50:28 (none) local0.notice cgminer[2108]: chain 0 read out low power voltage data 80 voltagge 800
Sep 14 23:50:28 (none) local0.notice cgminer[2108]: chain 1 read out low power voltage data 80 voltagge 800
Sep 14 23:50:28 (none) local0.notice cgminer[2108]: chain 2 read out low power voltage data 80 voltagge 800
Sep 14 23:50:28 (none) local0.notice cgminer[2108]: every_chain_enable_PIC16F1704_dc_dc_new
Sep 14 23:50:28 (none) local0.notice cgminer[2108]: enable_PIC16F1704_dc_dc_new ok
Sep 14 23:50:29 (none) local0.notice cgminer[2108]: enable_PIC16F1704_dc_dc_new ok
Sep 14 23:50:29 (none) local0.notice cgminer[2108]: enable_PIC16F1704_dc_dc_new ok
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: tty_init
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:30 (none) local0.err cgminer[2108]: create rx read thread for chain 0
Sep 14 23:50:30 (none) local0.err cgminer[2108]: create rx read thread for chain 0 ok
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[0]
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:30 (none) local0.err cgminer[2108]: create rx read thread for chain 1
Sep 14 23:50:30 (none) local0.err cgminer[2108]: create rx read thread for chain 1 ok
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[1]
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:30 (none) local0.err cgminer[2108]: create rx read thread for chain 2
Sep 14 23:50:30 (none) local0.err cgminer[2108]: create rx read thread for chain 2 ok
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[2]
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: IO Thread #b39ff470 using high-priority scheduler!
Sep 14 23:50:30 (none) local0.notice cgminer[2108]: check_every_chain_asic_number
Sep 14 23:50:31 (none) local0.warn cgminer[2108]: check_asic_reg: Chain0 has 0 ASICs
Sep 14 23:50:31 (none) local0.warn cgminer[2108]: check_asic_reg: Chain1 has 0 ASICs
Sep 14 23:50:31 (none) local0.warn cgminer[2108]: check_asic_reg: Chain2 has 0 ASICs
Sep 14 23:50:32 (none) local0.notice cgminer[2108]: power off!
Sep 14 23:50:33 (none) local0.notice cgminer[2108]: power on!
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: tty_init
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:35 (none) local0.err cgminer[2108]: create rx read thread for chain 0
Sep 14 23:50:35 (none) local0.err cgminer[2108]: create rx read thread for chain 0 ok
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[0]
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:35 (none) local0.err cgminer[2108]: create rx read thread for chain 1
Sep 14 23:50:35 (none) local0.err cgminer[2108]: create rx read thread for chain 1 ok
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[1]
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:35 (none) local0.err cgminer[2108]: create rx read thread for chain 2
Sep 14 23:50:35 (none) local0.err cgminer[2108]: create rx read thread for chain 2 ok
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[2]
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: IO Thread #b29ff470 using high-priority scheduler!
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: tty_init
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:35 (none) local0.err cgminer[2108]: create rx read thread for chain 0
Sep 14 23:50:35 (none) local0.err cgminer[2108]: create rx read thread for chain 0 ok
Sep 14 23:50:35 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[0]
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:36 (none) local0.err cgminer[2108]: create rx read thread for chain 1
Sep 14 23:50:36 (none) local0.err cgminer[2108]: create rx read thread for chain 1 ok
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[1]
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:36 (none) local0.err cgminer[2108]: create rx read thread for chain 2
Sep 14 23:50:36 (none) local0.err cgminer[2108]: create rx read thread for chain 2 ok
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[2]
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: IO Thread #b09ff470 using high-priority scheduler!
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: tty_init
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:36 (none) local0.err cgminer[2108]: create rx read thread for chain 0
Sep 14 23:50:36 (none) local0.err cgminer[2108]: create rx read thread for chain 0 ok
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[0]
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:36 (none) local0.err cgminer[2108]: create rx read thread for chain 1
Sep 14 23:50:36 (none) local0.err cgminer[2108]: create rx read thread for chain 1 ok
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[1]
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:36 (none) local0.err cgminer[2108]: create rx read thread for chain 2
Sep 14 23:50:36 (none) local0.err cgminer[2108]: create rx read thread for chain 2 ok
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[2]
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: IO Thread #ae9ff470 using high-priority scheduler!
Sep 14 23:50:36 (none) local0.notice cgminer[2108]: check_every_chain_asic_number
Sep 14 23:50:36 (none) local0.warn cgminer[2108]: check_asic_reg: Chain0 has 0 ASICs
Sep 14 23:50:37 (none) local0.warn cgminer[2108]: check_asic_reg: Chain1 has 0 ASICs
Sep 14 23:50:37 (none) local0.warn cgminer[2108]: check_asic_reg: Chain2 has 0 ASICs
Sep 14 23:50:37 (none) local0.notice cgminer[2108]: recheck_asic_num DONE!
Sep 14 23:50:37 (none) local0.notice cgminer[2108]: power off!
Sep 14 23:50:39 (none) local0.notice cgminer[2108]: power on!
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: tty_init
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 0
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 0 ok
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[0]
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 1
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 1 ok
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[1]
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 2
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 2 ok
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[2]
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: IO Thread #b49ff470 using high-priority scheduler!
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: tty_init
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 0
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 0 ok
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[0]
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 1
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 1 ok
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[1]
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 2
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 2 ok
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[2]
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: IO Thread #b11ff470 using high-priority scheduler!
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: tty_init
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 0
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 0 ok
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[0]
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 1
Sep 14 23:50:41 (none) local0.err cgminer[2108]: create rx read thread for chain 1 ok
Sep 14 23:50:41 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[1]
Sep 14 23:50:42 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:42 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:42 (none) local0.err cgminer[2108]: create rx read thread for chain 2
Sep 14 23:50:42 (none) local0.err cgminer[2108]: create rx read thread for chain 2 ok
Sep 14 23:50:42 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[2]
Sep 14 23:50:42 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:42 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:42 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:42 (none) local0.notice cgminer[2108]: IO Thread #ad1ff470 using high-priority scheduler!
Sep 14 23:50:42 (none) local0.notice cgminer[2108]: check_every_chain_asic_number
Sep 14 23:50:42 (none) local0.warn cgminer[2108]: check_asic_reg: Chain0 has 0 ASICs
Sep 14 23:50:42 (none) local0.warn cgminer[2108]: check_asic_reg: Chain1 has 0 ASICs
Sep 14 23:50:43 (none) local0.warn cgminer[2108]: check_asic_reg: Chain2 has 0 ASICs
Sep 14 23:50:43 (none) local0.notice cgminer[2108]: recheck_asic_num DONE!
Sep 14 23:50:43 (none) local0.notice cgminer[2108]: power off!
Sep 14 23:50:44 (none) local0.notice cgminer[2108]: power on!
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 0
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 0 ok
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[0]
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 1
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 1 ok
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[1]
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 2
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 2 ok
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[2]
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: IO Thread #af1ff470 using high-priority scheduler!
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 0
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 0 ok
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[0]
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 1
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 1 ok
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[1]
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 2
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 2 ok
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[2]
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: IO Thread #b01ff470 using high-priority scheduler!
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: MISC_CONTROL : 7002001
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 0
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 0 ok
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[0]
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 1
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 1 ok
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[1]
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 2
Sep 14 23:50:47 (none) local0.err cgminer[2108]: create rx read thread for chain 2 ok
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: Start A New Asic Response.Chain:[2]
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: tty_init_chain
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: open device over
Sep 14 23:50:47 (none) local0.notice cgminer[2108]: IO Thread #ab9ff470 using high-priority scheduler!
Sep 14 23:50:48 (none) local0.notice cgminer[2108]: check_every_chain_asic_number
Sep 14 23:50:48 (none) local0.warn cgminer[2108]: check_asic_reg: Chain0 has 0 ASICs
Sep 14 23:50:48 (none) local0.warn cgminer[2108]: check_asic_reg: Chain1 has 0 ASICs
Sep 14 23:50:48 (none) local0.warn cgminer[2108]: check_asic_reg: Chain2 has 0 ASICs
Sep 14 23:50:49 (none) local0.notice cgminer[2108]: recheck_asic_num DONE!
Sep 14 23:50:49 (none) local0.notice cgminer[2108]: calculate_address_interval: temp_asic_number = 128, addrInterval = 1
Sep 14 23:50:49 (none) local0.notice cgminer[2108]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 1
Sep 14 23:50:49 (none) local0.notice cgminer[2108]: Now Set [0] Chain Address
Sep 14 23:50:49 (none) local0.notice cgminer[2108]: software_set_address_chain: chain 1 has 0 ASIC, and addrInterval is 1
Sep 14 23:50:49 (none) local0.notice cgminer[2108]: Now Set [1] Chain Address
Sep 14 23:50:50 (none) local0.notice cgminer[2108]: software_set_address_chain: chain 2 has 0 ASIC, and addrInterval is 1
Sep 14 23:50:50 (none) local0.notice cgminer[2108]: Now Set [2] Chain Address
Sep 14 23:50:51 (none) local0.notice cgminer[2108]: check_every_chain_asic_number
Sep 14 23:50:51 (none) local0.warn cgminer[2108]: check_asic_reg: Chain0 has 0 ASICs
Sep 14 23:50:51 (none) local0.warn cgminer[2108]: check_asic_reg: Chain1 has 0 ASICs
Sep 14 23:50:52 (none) local0.warn cgminer[2108]: check_asic_reg: Chain2 has 0 ASICs
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: set_ticket_mask ticket_mask = 0x00000026
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: set_frequency_chain: chian = 0 freq = 450.000000
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: set_frequency_chain: pll_param = c0b40211, divider = 04, pll_freq = 2250.000000
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: set_frequency_chain: chian = 1 freq = 450.000000
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: set_frequency_chain: pll_param = c0b40211, divider = 04, pll_freq = 2250.000000
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: set_frequency_chain: chian = 2 freq = 450.000000
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: set_frequency_chain: pll_param = c0b40211, divider = 04, pll_freq = 2250.000000
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: enable_read_temperature_from_asic_chain: reg_value = 0x07006061
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: enable_read_temperature_from_asic_chain: reg_value = 0x07006061
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: enable_read_temperature_from_asic_chain: reg_value = 0x07006061
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: select_core_to_check_temperature_chain: diode_mux_sel = 1
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: select_core_to_check_temperature_chain: diode_mux_sel = 1
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: select_core_to_check_temperature_chain: diode_mux_sel = 1
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: calibration_sensor_offset
Sep 14 23:50:52 (none) local0.notice cgminer[2108]: 0 calibration_sensor_offset_chain
Sep 14 23:50:53 (none) local0.notice cgminer[2108]: chain:0 local:0 remote:0
Sep 14 23:50:53 (none) local0.warn cgminer[2108]: Chain 0 set_temperature_offset_value_chain_sensor
Sep 14 23:50:53 (none) local0.notice cgminer[2108]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Sep 14 23:50:54 (none) local0.notice cgminer[2108]: chain:0 local:0 remote:0
Sep 14 23:50:54 (none) local0.warn cgminer[2108]: Chain 0 set_temperature_offset_value_chain_sensor
Sep 14 23:50:55 (none) local0.notice cgminer[2108]: set_temperature_offset_value_chain_sensor: Chain0 Sensor1 temp offset : 00,
Sep 14 23:50:55 (none) local0.notice cgminer[2108]: chain:0 local:0 remote:0
Sep 14 23:50:55 (none) local0.warn cgminer[2108]: Chain 0 set_temperature_offset_value_chain_sensor
Sep 14 23:50:56 (none) local0.notice cgminer[2108]: set_temperature_offset_value_chain_sensor: Chain0 Sensor2 temp offset : 00,
Sep 14 23:50:57 (none) local0.notice cgminer[2108]: chain:0 local:0 remote:0
Sep 14 23:50:57 (none) local0.warn cgminer[2108]: Chain 0 set_temperature_offset_value_chain_sensor
Sep 14 23:50:57 (none) local0.notice cgminer[2108]: set_temperature_offset_value_chain_sensor: Chain0 Sensor3 temp offset : 00,
Sep 14 23:50:57 (none) local0.notice cgminer[2108]: 1 calibration_sensor_offset_chain
Sep 14 23:50:58 (none) local0.notice cgminer[2108]: chain:1 local:0 remote:0
Sep 14 23:50:58 (none) local0.warn cgminer[2108]: Chain 1 set_temperature_offset_value_chain_sensor
Sep 14 23:50:59 (none) local0.notice cgminer[2108]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : 00,
Sep 14 23:51:00 (none) local0.notice cgminer[2108]: chain:1 local:0 remote:0
Sep 14 23:51:00 (none) local0.warn cgminer[2108]: Chain 1 set_temperature_offset_value_chain_sensor
Sep 14 23:51:00 (none) local0.notice cgminer[2108]: set_temperature_offset_value_chain_sensor: Chain1 Sensor1 temp offset : 00,
Sep 14 23:51:01 (none) local0.notice cgminer[2108]: chain:1 local:0 remote:0
Sep 14 23:51:01 (none) local0.warn cgminer[2108]: Chain 1 set_temperature_offset_value_chain_sensor
Sep 14 23:51:02 (none) local0.notice cgminer[2108]: set_temperature_offset_value_chain_sensor: Chain1 Sensor2 temp offset : 00,
Sep 14 23:51:02 (none) local0.notice cgminer[2108]: chain:1 local:0 remote:0
Sep 14 23:51:02 (none) local0.warn cgminer[2108]: Chain 1 set_temperature_offset_value_chain_sensor
Sep 14 23:51:03 (none) local0.notice cgminer[2108]: set_temperature_offset_value_chain_sensor: Chain1 Sensor3 temp offset : 00,
Sep 14 23:51:03 (none) local0.notice cgminer[2108]: 2 calibration_sensor_offset_chain
Sep 14 23:51:04 (none) local0.notice cgminer[2108]: chain:2 local:0 remote:0
Sep 14 23:51:04 (none) local0.warn cgminer[2108]: Chain 2 set_temperature_offset_value_chain_sensor
Sep 14 23:51:05 (none) local0.notice cgminer[2108]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
Sep 14 23:51:05 (none) local0.notice cgminer[2108]: chain:2 local:0 remote:0
Sep 14 23:51:05 (none) local0.warn cgminer[2108]: Chain 2 set_temperature_offset_value_chain_sensor
Sep 14 23:51:06 (none) local0.notice cgminer[2108]: set_temperature_offset_value_chain_sensor: Chain2 Sensor1 temp offset : 00,
Sep 14 23:51:07 (none) local0.notice cgminer[2108]: chain:2 local:0 remote:0
Sep 14 23:51:07 (none) local0.warn cgminer[2108]: Chain 2 set_temperature_offset_value_chain_sensor
Sep 14 23:51:07 (none) local0.notice cgminer[2108]: set_temperature_offset_value_chain_sensor: Chain2 Sensor2 temp offset : 00,
Sep 14 23:51:08 (none) local0.notice cgminer[2108]: chain:2 local:0 remote:0
Sep 14 23:51:08 (none) local0.warn cgminer[2108]: Chain 2 set_temperature_offset_value_chain_sensor
Sep 14 23:51:09 (none) local0.notice cgminer[2108]: set_temperature_offset_value_chain_sensor: Chain2 Sensor3 temp offset : 00,
Sep 14 23:51:09 (none) local0.notice cgminer[2108]: bitmain_dcr_init: fan_eft: 0 fan_pwm : 30
Sep 14 23:51:09 (none) local0.notice cgminer[2108]: frequency = '450 timeout 13048'
Sep 14 23:51:52 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:51:53 (none) local0.err cgminer[2108]: cgminer time error total_secs = 1631663513.833706 last_total_secs = 1.000000
Sep 14 23:51:55 (none) local0.notice cgminer[2108]: pool diff: 46, sdiff: 16384.0000
Sep 14 23:51:55 (none) local0.warn cgminer[2108]: Pool 0 stratum+tcp://dcr.ss.poolin.com:443 alive, testing stability
Sep 14 23:51:55 (none) local0.warn cgminer[2108]: Switching to pool 0 stratum+tcp://dcr.ss.poolin.com:443
Sep 14 23:51:55 (none) local0.notice cgminer[2108]: pool diff: 46, sdiff: 16384.0000
Sep 14 23:51:55 (none) local0.notice cgminer[2108]: pool diff: 46, sdiff: 16384.0000
Sep 14 23:52:00 (none) local0.warn cgminer[2108]: API running in IP access mode on port 4028 (11)
Sep 14 23:52:02 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:52:13 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:52:23 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:52:34 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:52:44 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:52:54 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:53:05 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:53:15 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:53:26 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:53:31 (none) local0.notice cgminer[2108]: pool diff: 45, sdiff: 8192.0000
Sep 14 23:53:36 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:53:46 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:53:57 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:54:07 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:54:11 (none) local0.notice cgminer[2108]: pool diff: 44, sdiff: 4096.0000
Sep 14 23:54:18 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:54:28 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:54:39 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:54:45 (none) local0.notice cgminer[2108]: pool diff: 43, sdiff: 2048.0000
Sep 14 23:54:49 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:54:59 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:55:10 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:55:20 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:55:25 (none) local0.notice cgminer[2108]: pool diff: 42, sdiff: 1024.0000
Sep 14 23:55:31 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:55:41 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:55:51 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:56:02 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:56:12 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:56:23 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:56:33 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:56:44 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:56:54 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:57:04 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:57:15 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:57:25 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:57:36 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:57:46 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:57:56 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:58:07 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:58:17 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:58:28 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:58:38 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:58:49 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:58:59 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:59:09 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:59:20 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:59:30 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:59:41 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 14 23:59:51 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:00:01 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:00:12 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:00:22 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:00:33 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:00:43 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:00:54 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:01:04 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:01:15 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:01:25 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:01:35 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:01:46 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:01:56 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:01:56 (none) local0.notice cgminer[2108]: pool diff: 46, sdiff: 16384.0000
Sep 15 00:02:07 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:02:17 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:02:27 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:02:38 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:02:48 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:02:59 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:03:04 (none) local0.notice cgminer[2108]: pool diff: 45, sdiff: 8192.0000
Sep 15 00:03:09 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:03:20 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:03:30 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:03:40 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:03:44 (none) local0.notice cgminer[2108]: pool diff: 44, sdiff: 4096.0000
Sep 15 00:03:51 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:04:01 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:04:08 (none) local0.notice cgminer[2108]: pool diff: 43, sdiff: 2048.0000
Sep 15 00:04:12 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:04:22 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:04:32 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:04:43 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:04:48 (none) local0.notice cgminer[2108]: pool diff: 42, sdiff: 1024.0000
Sep 15 00:04:53 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:05:04 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:05:14 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:05:25 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:05:35 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:05:45 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:05:56 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:06:06 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:06:17 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:06:27 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:06:37 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:06:48 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:06:58 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:07:09 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:07:19 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:07:29 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:07:40 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:07:50 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:08:01 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:08:11 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:08:22 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:08:32 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:08:42 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:08:53 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:09:03 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:09:14 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:09:24 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:09:34 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:09:45 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:09:55 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:10:06 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:10:16 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:10:27 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:10:37 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:10:47 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:10:58 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:11:08 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:11:19 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:11:29 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:11:39 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:11:50 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:12:00 (none) local0.notice cgminer[2108]: pool diff: 46, sdiff: 16384.0000
Sep 15 00:12:00 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Sep 15 00:12:11 (none) local0.notice cgminer[2108]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!

WHAT TO DO?
I BOUGHT IT USED FROM SOMEONE. DID HE SCAM ME? :(