S9H算力版正常,治具测试异常,需要最新的s9h治具测试文件
已回答--- get time
Socket initialisation ok
UTC time is : Wed May 18 18:38:27 2016
change_time_format: year = 0x16
change_time_format: month = 0x05
change_time_format: day = 0x18
change_time_format: hour = 0x18
change_time_format: minute = 0x38
change_time_format: second = 0x27
begin test time
Wed May 18 18:38:27 UTC 2016
--- init_fpga
--- read_id
--- FPGA chip id: low: 0x1c20885c, high: 0x80702500
ts.tv_sec = 0x573cb6a4
ts.tv_usec = 0x000279fe
rand_num = 0x00000089
--- read_id: hash_board_id[0] = 0x1c
--- read_id: hash_board_id[1] = 0x20
--- read_id: hash_board_id[2] = 0x88
--- read_id: hash_board_id[3] = 0x5c
--- read_id: hash_board_id[4] = 0x57
--- read_id: hash_board_id[5] = 0x3c
--- read_id: hash_board_id[6] = 0xb6
--- read_id: hash_board_id[7] = 0xa4
--- read_id: hash_board_id[8] = 0x89
--- read_id: hash_board_id[9] = 0x02
--- read_id: hash_board_id[10] = 0x79
--- read_id: hash_board_id[11] = 0xfe
--- T9_plus_check_chain
get_hash_on_plug: HASH_ON_PLUG is 0xe
T9_plus_check_chain: get_hash_on_plug functions error. ret = 0x0000000e
No hash board, please plug in it
-
正式评论
Dear
Test files can be obtained in the following two ways:
Log in to the official website with material permission who only participated in the antminer's training can get this access, and download directly in the firmware download address (the account with material permission needs to be log in and downloads, and the account without permission cannot display the download). Firmware download address: https://service.bitmain.com/support/download
Consult your own trainer for it
If you are interested, you can refer to the training course of our ant college. The following is a brief introduction to the training https://support.bitmain.com/hc/en-us/articles/360015970014-Introduction-to-Ant-Training-Academy-Maintenance-Training-Guide- you also send the email to our training colleague directly training@bitmain.com.评论操作
请先登录再写评论。
评论
1 条评论