Error antminer Z15
已回答Hello, I have problems with my Z15, the machine turns on well and after a few hours it goes into error due to temperature, the error is as follows:
Sep 8 00:33:45 (none) local0.err cgminer[968]: read_temp_func: Chain1 sensor1 remote temp is 132 `C, higher than MAX_CHIP_TEMP
Sep 8 00:33:46 (none) local0.err cgminer[968]: Temperature pcb:50/chip:132 is higher than 80/110'C for 1 time, PWM is 63
Sep 8 00:33:47 (none) local0.err cgminer[968]: Temperature pcb:50/chip:132 is higher than 80/110'C for 2 time, PWM is 63
Sep 8 00:33:48 (none) local0.err cgminer[968]: check_miner_status: the temperature pcb:50/chip:132 is too high, close PIC and need reboot!!!
Sep 8 00:33:48 (none) local0.notice cgminer[968]: disable_PIC16F1704_dc_dc_new ok
Sep 8 00:33:48 (none) local0.notice cgminer[968]: disable_PIC16F1704_dc_dc_new ok
Sep 8 00:33:48 (none) local0.notice cgminer[968]: disable_PIC16F1704_dc_dc_new ok
What can I do to solve the problem
I have already cleaned the plates with air, check the ground connections in the installation
a greeting
-
正式评论
Dear
Could you send us full kernel log after the miner running 20-30 mins , after double checked with technical engineer we will advise you the solutions and advice.
Kernel log will always show the real reason issue for the antminer.
https://support.bitmain.com/hc/en-us/articles/360016522253-How-to-copy-Kernel-Log-into-text-form评论操作 -
Dear here, I send you the complete registration. Thank you very much for your help.
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-g0387054-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #45 SMP PREEMPT Wed Jun 19 15:03:51 CST 2019
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b3c280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s20032 r8192 d20928 u49152
pcpu-alloc: s20032 r8192 d20928 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203836K/245760K available (6348K kernel code, 243K rwdata, 1928K rodata, 1024K init, 233K bss, 25540K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0915150 (9269 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b3cfe0 ( 244 kB)
.bss : 0xc0b3cfe0 - 0xc0b77428 ( 234 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12476K (cced3000 - cdb02000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x00000b140000
5 ofpart partitions found on MTD device pl35x-nand
Creating 5 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcf9cc000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
Sep 9 01:41:53 (none) local0.err cgminer: Miner compile time: Fri Jul 3 11:39:06 CST 2020 type: Antminer Z15
Sep 9 01:41:53 (none) local0.warn cgminer: Started cgminer 4.9.0
Sep 9 01:41:53 (none) local0.notice cgminer[971]: z15 init...
Sep 9 01:41:53 (none) local0.notice cgminer[971]: httpListenThread start ret=0
Sep 9 01:41:54 (none) local0.notice cgminer[971]: FPGA version: B031
Sep 9 01:41:55 (none) local0.notice cgminer[971]: No 2 Fan find, check again
Sep 9 01:41:56 (none) local0.notice cgminer[971]: No 2 Fan find, check again
Sep 9 01:41:57 (none) local0.notice cgminer[971]: No 2 Fan find, check again
Sep 9 01:41:59 (none) local0.notice cgminer[971]: fan-num 2 fan-map 12
Sep 9 01:41:59 (none) local0.notice cgminer[971]: check_chain
Sep 9 01:41:59 (none) local0.notice cgminer[971]: Chain 0 existed!
Sep 9 01:41:59 (none) local0.notice cgminer[971]: Chain 1 existed!
Sep 9 01:41:59 (none) local0.notice cgminer[971]: Chain 2 existed!
Sep 9 01:41:59 (none) local0.notice cgminer[971]: chain0 every_chain_reset_PIC16F1704_pic_new
Sep 9 01:42:00 (none) local0.notice cgminer[971]: reset_PIC16F1704_pic_new ok
Sep 9 01:42:00 (none) local0.notice cgminer[971]: chain1 every_chain_reset_PIC16F1704_pic_new
Sep 9 01:42:01 (none) local0.notice cgminer[971]: reset_PIC16F1704_pic_new ok
Sep 9 01:42:01 (none) local0.notice cgminer[971]: chain2 every_chain_reset_PIC16F1704_pic_new
Sep 9 01:42:02 (none) local0.notice cgminer[971]: reset_PIC16F1704_pic_new ok
Sep 9 01:42:03 (none) local0.notice cgminer[971]: chain0 every_chain_jump_from_loader_to_app_PIC16F1704_new
Sep 9 01:42:03 (none) local0.notice cgminer[971]: jump_from_loader_to_app_PIC16F1704_new ok
Sep 9 01:42:03 (none) local0.notice cgminer[971]: chain1 every_chain_jump_from_loader_to_app_PIC16F1704_new
Sep 9 01:42:04 (none) local0.notice cgminer[971]: jump_from_loader_to_app_PIC16F1704_new ok
Sep 9 01:42:04 (none) local0.notice cgminer[971]: chain2 every_chain_jump_from_loader_to_app_PIC16F1704_new
Sep 9 01:42:04 (none) local0.notice cgminer[971]: jump_from_loader_to_app_PIC16F1704_new ok
Sep 9 01:42:06 (none) local0.notice cgminer[971]: reset_all_hash_board_low 4386
Sep 9 01:42:06 (none) local0.notice cgminer[971]: pic_heart_beat_func_new
Sep 9 01:42:06 (none) local0.notice cgminer[971]: every_chain_disable_PIC16F1704_dc_dc_new
Sep 9 01:42:06 (none) local0.notice cgminer[971]: disable_PIC16F1704_dc_dc_new ok
Sep 9 01:42:06 (none) local0.notice cgminer[971]: disable_PIC16F1704_dc_dc_new ok
Sep 9 01:42:07 (none) local0.notice cgminer[971]: disable_PIC16F1704_dc_dc_new ok
Sep 9 01:42:08 (none) local0.notice cgminer[971]: every_chain_enable_PIC16F1704_dc_dc_new
Sep 9 01:42:08 (none) local0.notice cgminer[971]: enable_PIC16F1704_dc_dc_new ok
Sep 9 01:42:08 (none) local0.notice cgminer[971]: enable_PIC16F1704_dc_dc_new ok
Sep 9 01:42:08 (none) local0.notice cgminer[971]: enable_PIC16F1704_dc_dc_new ok
Sep 9 01:42:09 (none) local0.notice cgminer[971]: reset_all_hash_board_high 4392
Sep 9 01:42:09 (none) local0.notice cgminer[971]: tty_init
Sep 9 01:42:09 (none) local0.notice cgminer[971]: tty_init_chain chainid = 0
Sep 9 01:42:09 (none) local0.err cgminer[971]: create rx read thread for chain 0 ok
Sep 9 01:42:09 (none) local0.notice cgminer[971]: Start A New Asic Response.Chain Id:[0]
Sep 9 01:42:09 (none) local0.err cgminer[971]: create tx read thread for chain 0 ok
Sep 9 01:42:09 (none) local0.notice cgminer[971]: open device over
Sep 9 01:42:09 (none) local0.notice cgminer[971]: tty_init_chain chainid = 1
Sep 9 01:42:09 (none) local0.err cgminer[971]: create rx read thread for chain 1 ok
Sep 9 01:42:09 (none) local0.notice cgminer[971]: Start A New Asic Response.Chain Id:[1]
Sep 9 01:42:09 (none) local0.err cgminer[971]: create tx read thread for chain 1 ok
Sep 9 01:42:09 (none) local0.notice cgminer[971]: open device over
Sep 9 01:42:09 (none) local0.notice cgminer[971]: tty_init_chain chainid = 2
Sep 9 01:42:09 (none) local0.err cgminer[971]: create rx read thread for chain 2 ok
Sep 9 01:42:09 (none) local0.notice cgminer[971]: Start A New Asic Response.Chain Id:[2]
Sep 9 01:42:10 (none) local0.err cgminer[971]: create tx read thread for chain 2 ok
Sep 9 01:42:10 (none) local0.notice cgminer[971]: open device over
Sep 9 01:42:14 (none) local0.notice cgminer[971]: calculate_address_interval:addrInterval = 64
Sep 9 01:42:16 (none) local0.notice cgminer[971]: check_every_chain_asic_number
Sep 9 01:42:17 (none) local0.notice cgminer[971]: check_asic_reg: chain J0 has 3 ASIC
Sep 9 01:42:19 (none) local0.notice cgminer[971]: check_asic_reg: chain J1 has 3 ASIC
Sep 9 01:42:21 (none) local0.notice cgminer[971]: check_asic_reg: chain J2 has 3 ASIC
Sep 9 01:42:22 (none) local0.notice cgminer[971]: chain0 pic version 04
Sep 9 01:42:22 (none) local0.notice cgminer[971]: chain1 pic version 04
Sep 9 01:42:23 (none) local0.notice cgminer[971]: chain2 pic version 04
Sep 9 01:42:23 (none) local0.notice cgminer[971]: start listen on 6060 ...
Sep 9 01:42:24 (none) local0.notice cgminer[971]: pic read chain0 asic0 freq 815
Sep 9 01:42:24 (none) local0.notice cgminer[971]: pic read chain0 asic1 freq 815
Sep 9 01:42:24 (none) local0.notice cgminer[971]: pic read chain0 asic2 freq 815
Sep 9 01:42:24 (none) local0.notice cgminer[971]: pic read chain1 asic0 freq 1936028255
Sep 9 01:42:24 (none) local0.notice cgminer[971]: pic read chain1 asic1 freq 1886217588
Sep 9 01:42:24 (none) local0.notice cgminer[971]: pic read chain1 asic2 freq 1918855283
Sep 9 01:42:24 (none) local0.notice cgminer[971]: pic read chain2 asic0 freq 1634563177
Sep 9 01:42:24 (none) local0.notice cgminer[971]: pic read chain2 asic1 freq 443
Sep 9 01:42:24 (none) local0.notice cgminer[971]: pic read chain2 asic2 freq 1919230052
Sep 9 01:42:24 (none) local0.notice cgminer[971]: 1 Goto turbo mode
Sep 9 01:42:24 (none) local0.notice cgminer[971]: set_ticket_mask_chain chainID0 ticket_mask = 0x00000010
Sep 9 01:42:24 (none) local0.notice cgminer[971]: set_ticket_mask_chain chainID1 ticket_mask = 0x00000010
Sep 9 01:42:24 (none) local0.notice cgminer[971]: set_ticket_mask_chain chainID2 ticket_mask = 0x00000010
Sep 9 01:42:25 (none) local0.notice cgminer[971]: software_set_address_chain chainID0 asics 3 addrInterval 64
Sep 9 01:42:25 (none) local0.notice cgminer[971]: software_set_address_chain chainID1 asics 3 addrInterval 64
Sep 9 01:42:25 (none) local0.notice cgminer[971]: software_set_address_chain chainID2 asics 3 addrInterval 64
Sep 9 01:42:25 (none) local0.notice cgminer[971]: enable_read_temperature_from_asic_chain: reg_value=0x07006061 chainid 0
Sep 9 01:42:26 (none) local0.notice cgminer[971]: enable_read_temperature_from_asic_chain: reg_value=0x07006061 chainid 1
Sep 9 01:42:26 (none) local0.notice cgminer[971]: enable_read_temperature_from_asic_chain: reg_value=0x07006061 chainid 2
Sep 9 01:42:26 (none) local0.notice cgminer[971]: chainid0 set_analog_mux_control_chain: analog mux = 00000000
Sep 9 01:42:26 (none) local0.notice cgminer[971]: chainid1 set_analog_mux_control_chain: analog mux = 00000000
Sep 9 01:42:26 (none) local0.notice cgminer[971]: chainid2 set_analog_mux_control_chain: analog mux = 00000000
Sep 9 01:42:26 (none) local0.notice cgminer[971]: dev.timeout = 100000000 us
Sep 9 01:42:26 (none) local0.notice cgminer[971]: bitmain_ZCASH_init: fan_eft : 0 fan_pwm : 50
Sep 9 01:42:29 (none) local0.notice cgminer[971]: bitmain_ZCASH_init done
Sep 9 01:42:29 (none) local0.err cgminer[971]: cgminer time error total_secs = 1631151749.891644 last_total_secs = 1.000000
Sep 9 01:42:30 (none) local0.info cgminer[971]: Pool 1 extranonce set to A5E06CB1
Sep 9 01:42:30 (none) local0.notice cgminer[971]: stime.tv_sec 1631151750, block_ntime 1631151748
Sep 9 01:42:34 (none) local0.warn cgminer[971]: Failed to resolve (?wrong URL) stratum+tcp://:(null)
Sep 9 01:42:35 (none) local0.info cgminer[971]: Pool 0 extranonce set to CD5F44CD0015
Sep 9 01:42:35 (none) local0.warn cgminer[971]: Pool 0 stratum+tcp://equihash.luxor.tech:700 alive, testing stability
Sep 9 01:42:35 (none) local0.warn cgminer[971]: Switching to pool 0 stratum+tcp://equihash.luxor.tech:700
Sep 9 01:42:35 (none) local0.warn cgminer[971]: API running in IP access mode on port 4028 (11)
Sep 9 01:42:44 (none) local0.notice cgminer[971]: All asics arrive target freq
Sep 9 02:12:05 (none) local0.err cgminer[971]: bm1740_verify_nonce_integrality CRC error. cal-crc=674a, chip-crc=4a15
Sep 9 02:12:05 (none) local0.warn cgminer[971]: receive a error nonce. total = 0 -
Dear
There is asic abnormal,could you try the below:
1 Clean the dust for the antminer: How To Clean and Dust The Antminers https://support.bitmain.com/hc/en-us/articles/115004520173-How-To-Clean-and-Dust-The-Antminers
2. Flash the SD card program to recover the control board.
Please download the SD card file in the below link
https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image
-
Please, I have the same problem with my Z15 antminer, here is my kernel log:
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-g0387054-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #45 SMP PREEMPT Wed Jun 19 15:03:51 CST 2019
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b3c280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s20032 r8192 d20928 u49152
pcpu-alloc: s20032 r8192 d20928 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203836K/245760K available (6348K kernel code, 243K rwdata, 1928K rodata, 1024K init, 233K bss, 25540K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0915150 (9269 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b3cfe0 ( 244 kB)
.bss : 0xc0b3cfe0 - 0xc0b77428 ( 234 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12476K (cced3000 - cdb02000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
5 ofpart partitions found on MTD device pl35x-nand
Creating 5 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcf9cc000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
Feb 13 12:17:02 (none) local0.err cgminer: Miner compile time: Fri Jul 3 11:39:06 CST 2020 type: Antminer Z15
Feb 13 12:17:02 (none) local0.warn cgminer: Started cgminer 4.9.0
Feb 13 12:17:02 (none) local0.notice cgminer[969]: z15 init...
Feb 13 12:17:02 (none) local0.notice cgminer[969]: httpListenThread start ret=0
Feb 13 12:17:04 (none) local0.notice cgminer[969]: FPGA version: B031
Feb 13 12:17:04 (none) local0.notice cgminer[969]: No 2 Fan find, check again
Feb 13 12:17:06 (none) local0.notice cgminer[969]: fan-num 2 fan-map 3
Feb 13 12:17:06 (none) local0.notice cgminer[969]: check_chain
Feb 13 12:17:06 (none) local0.notice cgminer[969]: Chain 0 existed!
Feb 13 12:17:06 (none) local0.notice cgminer[969]: Chain 1 existed!
Feb 13 12:17:06 (none) local0.notice cgminer[969]: Chain 2 existed!
Feb 13 12:17:06 (none) local0.notice cgminer[969]: chain0 every_chain_reset_PIC16F1704_pic_new
Feb 13 12:17:07 (none) local0.notice cgminer[969]: reset_PIC16F1704_pic_new ok
Feb 13 12:17:07 (none) local0.notice cgminer[969]: chain1 every_chain_reset_PIC16F1704_pic_new
Feb 13 12:17:08 (none) local0.notice cgminer[969]: reset_PIC16F1704_pic_new ok
Feb 13 12:17:08 (none) local0.notice cgminer[969]: chain2 every_chain_reset_PIC16F1704_pic_new
Feb 13 12:17:09 (none) local0.notice cgminer[969]: reset_PIC16F1704_pic_new ok
Feb 13 12:17:10 (none) local0.notice cgminer[969]: chain0 every_chain_jump_from_loader_to_app_PIC16F1704_new
Feb 13 12:17:10 (none) local0.notice cgminer[969]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 13 12:17:10 (none) local0.notice cgminer[969]: chain1 every_chain_jump_from_loader_to_app_PIC16F1704_new
Feb 13 12:17:11 (none) local0.notice cgminer[969]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 13 12:17:11 (none) local0.notice cgminer[969]: chain2 every_chain_jump_from_loader_to_app_PIC16F1704_new
Feb 13 12:17:11 (none) local0.notice cgminer[969]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 13 12:17:13 (none) local0.notice cgminer[969]: reset_all_hash_board_low 4386
Feb 13 12:17:13 (none) local0.notice cgminer[969]: pic_heart_beat_func_new
Feb 13 12:17:13 (none) local0.notice cgminer[969]: every_chain_disable_PIC16F1704_dc_dc_new
Feb 13 12:17:13 (none) local0.notice cgminer[969]: disable_PIC16F1704_dc_dc_new ok
Feb 13 12:17:13 (none) local0.notice cgminer[969]: disable_PIC16F1704_dc_dc_new ok
Feb 13 12:17:14 (none) local0.notice cgminer[969]: disable_PIC16F1704_dc_dc_new ok
Feb 13 12:17:15 (none) local0.notice cgminer[969]: every_chain_enable_PIC16F1704_dc_dc_new
Feb 13 12:17:15 (none) local0.notice cgminer[969]: enable_PIC16F1704_dc_dc_new ok
Feb 13 12:17:15 (none) local0.notice cgminer[969]: enable_PIC16F1704_dc_dc_new ok
Feb 13 12:17:15 (none) local0.notice cgminer[969]: enable_PIC16F1704_dc_dc_new ok
Feb 13 12:17:16 (none) local0.notice cgminer[969]: reset_all_hash_board_high 4392
Feb 13 12:17:16 (none) local0.notice cgminer[969]: tty_init
Feb 13 12:17:16 (none) local0.notice cgminer[969]: tty_init_chain chainid = 0
Feb 13 12:17:16 (none) local0.err cgminer[969]: create rx read thread for chain 0 ok
Feb 13 12:17:16 (none) local0.notice cgminer[969]: Start A New Asic Response.Chain Id:[0]
Feb 13 12:17:16 (none) local0.err cgminer[969]: create tx read thread for chain 0 ok
Feb 13 12:17:16 (none) local0.notice cgminer[969]: open device over
Feb 13 12:17:16 (none) local0.notice cgminer[969]: tty_init_chain chainid = 1
Feb 13 12:17:16 (none) local0.err cgminer[969]: create rx read thread for chain 1 ok
Feb 13 12:17:16 (none) local0.notice cgminer[969]: Start A New Asic Response.Chain Id:[1]
Feb 13 12:17:16 (none) local0.err cgminer[969]: create tx read thread for chain 1 ok
Feb 13 12:17:16 (none) local0.notice cgminer[969]: open device over
Feb 13 12:17:16 (none) local0.notice cgminer[969]: tty_init_chain chainid = 2
Feb 13 12:17:16 (none) local0.err cgminer[969]: create rx read thread for chain 2 ok
Feb 13 12:17:16 (none) local0.notice cgminer[969]: Start A New Asic Response.Chain Id:[2]
Feb 13 12:17:17 (none) local0.err cgminer[969]: create tx read thread for chain 2 ok
Feb 13 12:17:17 (none) local0.notice cgminer[969]: open device over
Feb 13 12:17:21 (none) local0.notice cgminer[969]: calculate_address_interval:addrInterval = 64
Feb 13 12:17:23 (none) local0.notice cgminer[969]: check_every_chain_asic_number
Feb 13 12:17:24 (none) local0.notice cgminer[969]: check_asic_reg: chain J0 has 3 ASIC
Feb 13 12:17:26 (none) local0.notice cgminer[969]: check_asic_reg: chain J1 has 3 ASIC
Feb 13 12:17:27 (none) local0.notice cgminer[969]: check_asic_reg: chain J2 has 3 ASIC
Feb 13 12:17:29 (none) local0.notice cgminer[969]: chain0 pic version 04
Feb 13 12:17:29 (none) local0.notice cgminer[969]: chain1 pic version 04
Feb 13 12:17:30 (none) local0.notice cgminer[969]: chain2 pic version 04
Feb 13 12:17:31 (none) local0.notice cgminer[969]: pic read chain0 asic0 freq 412
Feb 13 12:17:31 (none) local0.notice cgminer[969]: pic read chain0 asic1 freq 1919905904
Feb 13 12:17:31 (none) local0.notice cgminer[969]: pic read chain0 asic2 freq 0
Feb 13 12:17:31 (none) local0.notice cgminer[969]: pic read chain1 asic0 freq 1936028255
Feb 13 12:17:31 (none) local0.notice cgminer[969]: pic read chain1 asic1 freq 1886217588
Feb 13 12:17:31 (none) local0.notice cgminer[969]: pic read chain1 asic2 freq 1918855283
Feb 13 12:17:31 (none) local0.notice cgminer[969]: pic read chain2 asic0 freq 0
Feb 13 12:17:31 (none) local0.notice cgminer[969]: pic read chain2 asic1 freq 1852399477
Feb 13 12:17:31 (none) local0.notice cgminer[969]: pic read chain2 asic2 freq 420
Feb 13 12:17:31 (none) local0.notice cgminer[969]: 1 Goto turbo mode
Feb 13 12:17:31 (none) local0.notice cgminer[969]: set_ticket_mask_chain chainID0 ticket_mask = 0x00000010
Feb 13 12:17:31 (none) local0.notice cgminer[969]: set_ticket_mask_chain chainID1 ticket_mask = 0x00000010
Feb 13 12:17:31 (none) local0.notice cgminer[969]: set_ticket_mask_chain chainID2 ticket_mask = 0x00000010
Feb 13 12:17:31 (none) local0.notice cgminer[969]: software_set_address_chain chainID0 asics 3 addrInterval 64
Feb 13 12:17:32 (none) local0.notice cgminer[969]: software_set_address_chain chainID1 asics 3 addrInterval 64
Feb 13 12:17:32 (none) local0.notice cgminer[969]: software_set_address_chain chainID2 asics 3 addrInterval 64
Feb 13 12:17:32 (none) local0.notice cgminer[969]: start listen on 6060 ...
Feb 13 12:17:32 (none) local0.notice cgminer[969]: enable_read_temperature_from_asic_chain: reg_value=0x07006061 chainid 0
Feb 13 12:17:33 (none) local0.notice cgminer[969]: enable_read_temperature_from_asic_chain: reg_value=0x07006061 chainid 1
Feb 13 12:17:33 (none) local0.notice cgminer[969]: enable_read_temperature_from_asic_chain: reg_value=0x07006061 chainid 2
Feb 13 12:17:33 (none) local0.notice cgminer[969]: chainid0 set_analog_mux_control_chain: analog mux = 00000000
Feb 13 12:17:33 (none) local0.notice cgminer[969]: chainid1 set_analog_mux_control_chain: analog mux = 00000000
Feb 13 12:17:33 (none) local0.notice cgminer[969]: chainid2 set_analog_mux_control_chain: analog mux = 00000000
Feb 13 12:17:33 (none) local0.notice cgminer[969]: dev.timeout = 100000000 us
Feb 13 12:17:33 (none) local0.notice cgminer[969]: bitmain_ZCASH_init: fan_eft : 0 fan_pwm : 50
Feb 13 12:17:36 (none) local0.notice cgminer[969]: bitmain_ZCASH_init done
Feb 13 12:17:36 (none) local0.err cgminer[969]: cgminer time error total_secs = 1644754656.863695 last_total_secs = 1.000000
Feb 13 12:17:37 (none) local0.info cgminer[969]: Pool 2 extranonce set to 7b940000
Feb 13 12:17:37 (none) local0.info cgminer[969]: Pool 1 extranonce set to 4cb20000
Feb 13 12:17:37 (none) local0.info cgminer[969]: Pool 0 extranonce set to 32b80000
Feb 13 12:17:37 (none) local0.notice cgminer[969]: stime.tv_sec 1644754657, block_ntime 1644754651
Feb 13 12:17:37 (none) local0.warn cgminer[969]: Pool 1 stratum+tcp://stratum-zec.antpool.com:443 alive, testing stability
Feb 13 12:17:37 (none) local0.warn cgminer[969]: Switching to pool 1 stratum+tcp://stratum-zec.antpool.com:443
Feb 13 12:17:38 (none) local0.warn cgminer[969]: Pool 0 stratum+tcp://stratum-zec.antpool.com:8899 alive, testing stability
Feb 13 12:17:38 (none) local0.warn cgminer[969]: Switching to pool 0 stratum+tcp://stratum-zec.antpool.com:8899
Feb 13 12:17:43 (none) local0.warn cgminer[969]: API running in IP access mode on port 4028 (10)
Feb 13 12:17:44 (none) local0.notice cgminer[969]: All asics arrive target freq
Feb 13 12:24:27 (none) local0.err cgminer[969]: read_temp_func: Chain2 sensor0 remote temp is 115 `C, higher than MAX_CHIP_TEMP
Feb 13 12:24:28 (none) local0.err cgminer[969]: Temperature pcb:79/chip:115 is higher than 80/110'C for 1 time, PWM is 100
Feb 13 12:24:29 (none) local0.err cgminer[969]: Temperature pcb:79/chip:115 is higher than 80/110'C for 2 time, PWM is 100
Feb 13 12:24:30 (none) local0.err cgminer[969]: check_miner_status: the temperature pcb:79/chip:115 is too high, close PIC and need reboot!!!
Feb 13 12:24:30 (none) local0.notice cgminer[969]: disable_PIC16F1704_dc_dc_new ok
Feb 13 12:24:30 (none) local0.notice cgminer[969]: disable_PIC16F1704_dc_dc_new ok
Feb 13 12:24:31 (none) local0.notice cgminer[969]: disable_PIC16F1704_dc_dc_new ok
Feb 13 12:34:02 (none) local0.info cgminer[969]: Pool 0 extranonce set to a5a70000Your prompt attention would be apreciate, thanks. -
This is the kernel log when I have flashed with the SD Card:
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #22 SMP PREEMPT Fri Dec 22 12:25:44 CST 2017
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0938d00, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 205952K/245760K available (5317K kernel code, 230K rwdata, 1844K rodata, 1024K init, 222K bss, 23424K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc07fe410 (8154 kB)
.init : 0xc0800000 - 0xc0900000 (1024 kB)
.data : 0xc0900000 - 0xc0939a60 ( 231 kB)
.bss : 0xc0939a60 - 0xc09713e8 ( 223 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12432K (ccedc000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
5 ofpart partitions found on MTD device pl35x-nand
Creating 5 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0800000 - c0900000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcf99c000
*base_vir_addr = 0x200fc513
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
Feb 13 17:53:17 (none) local0.err cgminer: Miner compile time: Tue Mar 5 15:47:07 CST 2019 type: Antminer Z11
Feb 13 17:53:17 (none) local0.warn cgminer: Started cgminer 4.9.0
Feb 13 17:53:17 (none) local0.warn cgminer[970]: bitmain_ZCASH_init
Feb 13 17:53:18 (none) local0.notice cgminer[970]: No 2 Fan find, check again
Feb 13 17:53:19 (none) local0.notice cgminer[970]: No 2 Fan find, check again
Feb 13 17:53:20 (none) local0.notice cgminer[970]: fan-num 2 fan-map 3
Feb 13 17:53:20 (none) local0.notice cgminer[970]: check_chain
Feb 13 17:53:20 (none) local0.notice cgminer[970]: Chain 0 existed!
Feb 13 17:53:20 (none) local0.notice cgminer[970]: Chain 1 existed!
Feb 13 17:53:20 (none) local0.notice cgminer[970]: Chain 2 existed!
Feb 13 17:53:20 (none) local0.notice cgminer[970]: chain0 every_chain_reset_PIC16F1704_pic_new
Feb 13 17:53:21 (none) local0.notice cgminer[970]: reset_PIC16F1704_pic_new ok
Feb 13 17:53:21 (none) local0.notice cgminer[970]: chain1 every_chain_reset_PIC16F1704_pic_new
Feb 13 17:53:23 (none) local0.notice cgminer[970]: reset_PIC16F1704_pic_new ok
Feb 13 17:53:23 (none) local0.notice cgminer[970]: chain2 every_chain_reset_PIC16F1704_pic_new
Feb 13 17:53:24 (none) local0.notice cgminer[970]: reset_PIC16F1704_pic_new ok
Feb 13 17:53:24 (none) local0.notice cgminer[970]: chain0 every_chain_jump_from_loader_to_app_PIC16F1704_new
Feb 13 17:53:25 (none) local0.notice cgminer[970]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 13 17:53:25 (none) local0.notice cgminer[970]: chain1 every_chain_jump_from_loader_to_app_PIC16F1704_new
Feb 13 17:53:25 (none) local0.notice cgminer[970]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 13 17:53:25 (none) local0.notice cgminer[970]: chain2 every_chain_jump_from_loader_to_app_PIC16F1704_new
Feb 13 17:53:26 (none) local0.notice cgminer[970]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 13 17:53:28 (none) local0.notice cgminer[970]: reset_all_hash_board_low 4070
Feb 13 17:53:28 (none) local0.notice cgminer[970]: pic_heart_beat_func_new
Feb 13 17:53:28 (none) local0.notice cgminer[970]: every_chain_disable_PIC16F1704_dc_dc_new
Feb 13 17:53:28 (none) local0.notice cgminer[970]: disable_PIC16F1704_dc_dc_new ok
Feb 13 17:53:28 (none) local0.notice cgminer[970]: disable_PIC16F1704_dc_dc_new ok
Feb 13 17:53:28 (none) local0.notice cgminer[970]: disable_PIC16F1704_dc_dc_new ok
Feb 13 17:53:34 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:53:34 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:53:35 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:53:36 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:53:36 (none) local0.notice cgminer[970]: set vol 870, get vol 0, set again!
Feb 13 17:53:37 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:53:37 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:53:39 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:53:39 (none) local0.notice cgminer[970]: set vol 870, get vol 0, set again!
Feb 13 17:53:39 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:53:39 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:53:41 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:53:41 (none) local0.notice cgminer[970]: set vol 870, get vol 0, set again!
Feb 13 17:53:42 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:53:42 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:53:43 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:53:43 (none) local0.notice cgminer[970]: set vol 870, get vol 0, set again!
Feb 13 17:53:53 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:53:53 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:53:53 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:53:55 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:53:55 (none) local0.notice cgminer[970]: set vol 870, get vol 0, set again!
Feb 13 17:53:55 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:53:56 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:53:57 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:53:57 (none) local0.notice cgminer[970]: set vol 870, get vol 0, set again!
Feb 13 17:53:58 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:53:58 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:54:00 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:54:00 (none) local0.notice cgminer[970]: set vol 870, get vol 0, set again!
Feb 13 17:54:00 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:54:00 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:54:02 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:54:02 (none) local0.notice cgminer[970]: set vol 870, get vol 0, set again!
Feb 13 17:54:11 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:54:11 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:54:12 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:54:13 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:54:13 (none) local0.notice cgminer[970]: set vol 870, get vol 0, set again!
Feb 13 17:54:14 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:54:14 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:54:16 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:54:16 (none) local0.notice cgminer[970]: set vol 870, get vol 0, set again!
Feb 13 17:54:16 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:54:16 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:54:18 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:54:18 (none) local0.notice cgminer[970]: set vol 870, get vol 0, set again!
Feb 13 17:54:19 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:54:19 (none) local0.notice cgminer[970]: --- write_dc_dc failed! read_back_data[0] = 0x05, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x01
Feb 13 17:54:20 (none) local0.notice cgminer[970]: --- read_dc_dc failed! read_back_data[0] = 0x07, read_back_data[1] = 0x32, read_back_data[2] = 0xff, read_back_data[3] = 0x66
Feb 13 17:54:20 (none) local0.notice cgminer[970]: set vol 870, get vol 0, set again!
Feb 13 17:54:26 (none) local0.notice cgminer[970]: every_chain_enable_PIC16F1704_dc_dc_new
Feb 13 17:54:26 (none) local0.notice cgminer[970]: enable_PIC16F1704_dc_dc_new ok
Feb 13 17:54:26 (none) local0.notice cgminer[970]: enable_PIC16F1704_dc_dc_new ok
Feb 13 17:54:27 (none) local0.notice cgminer[970]: enable_PIC16F1704_dc_dc_new ok
Feb 13 17:54:27 (none) local0.notice cgminer[970]: reset_all_hash_board_high 4076
Feb 13 17:54:27 (none) local0.notice cgminer[970]: tty_init
Feb 13 17:54:27 (none) local0.notice cgminer[970]: tty_init_chain chainid = 0
Feb 13 17:54:27 (none) local0.err cgminer[970]: create rx read thread for chain 0 ok
Feb 13 17:54:27 (none) local0.notice cgminer[970]: Start A New Asic Response.Chain Id:[0]
Feb 13 17:54:27 (none) local0.err cgminer[970]: create tx read thread for chain 0 ok
Feb 13 17:54:27 (none) local0.notice cgminer[970]: open device over
Feb 13 17:54:27 (none) local0.notice cgminer[970]: tty_init_chain chainid = 1
Feb 13 17:54:27 (none) local0.err cgminer[970]: create rx read thread for chain 1 ok
Feb 13 17:54:27 (none) local0.notice cgminer[970]: Start A New Asic Response.Chain Id:[1]
Feb 13 17:54:28 (none) local0.err cgminer[970]: create tx read thread for chain 1 ok
Feb 13 17:54:28 (none) local0.notice cgminer[970]: open device over
Feb 13 17:54:28 (none) local0.notice cgminer[970]: tty_init_chain chainid = 2
Feb 13 17:54:28 (none) local0.err cgminer[970]: create rx read thread for chain 2 ok
Feb 13 17:54:28 (none) local0.notice cgminer[970]: Start A New Asic Response.Chain Id:[2]
Feb 13 17:54:28 (none) local0.err cgminer[970]: create tx read thread for chain 2 ok
Feb 13 17:54:28 (none) local0.notice cgminer[970]: open device over
Feb 13 17:54:32 (none) local0.notice cgminer[970]: calculate_address_interval:addrInterval = 64
Feb 13 17:54:34 (none) local0.notice cgminer[970]: check_every_chain_asic_number
Feb 13 17:54:36 (none) local0.notice cgminer[970]: check_asic_reg: chain J0 has 3 ASIC
Feb 13 17:54:37 (none) local0.notice cgminer[970]: check_asic_reg: chain J1 has 3 ASIC
Feb 13 17:54:39 (none) local0.notice cgminer[970]: check_asic_reg: chain J2 has 3 ASIC
Feb 13 17:54:39 (none) local0.notice cgminer[970]: chainid0 set_frequency_chain freq=681
Feb 13 17:54:39 (none) local0.notice cgminer[970]: chainid1 set_frequency_chain freq=681
Feb 13 17:54:39 (none) local0.notice cgminer[970]: chainid2 set_frequency_chain freq=681
Feb 13 17:54:39 (none) local0.notice cgminer[970]: Goto scan mode and find the best frequency
Feb 13 17:54:40 (none) local0.notice cgminer[970]: set_ticket_mask_chain chainID0 ticket_mask = 0x0000000d
Feb 13 17:54:40 (none) local0.notice cgminer[970]: set_ticket_mask_chain chainID1 ticket_mask = 0x0000000d
Feb 13 17:54:40 (none) local0.notice cgminer[970]: set_ticket_mask_chain chainID2 ticket_mask = 0x0000000d
Feb 13 17:54:40 (none) local0.notice cgminer[970]: software_set_address_chain chainID0 asics 3 addrInterval 64
Feb 13 17:54:40 (none) local0.notice cgminer[970]: software_set_address_chain chainID1 asics 3 addrInterval 64
Feb 13 17:54:40 (none) local0.notice cgminer[970]: software_set_address_chain chainID2 asics 3 addrInterval 64
Feb 13 17:54:41 (none) local0.notice cgminer[970]: chainid0 set_core_timeout_chain: core timeout = 00014820
Feb 13 17:54:41 (none) local0.notice cgminer[970]: chainid1 set_core_timeout_chain: core timeout = 00014820
Feb 13 17:54:41 (none) local0.notice cgminer[970]: chainid2 set_core_timeout_chain: core timeout = 00014820
Feb 13 17:54:41 (none) local0.notice cgminer[970]: enable_read_temperature_from_asic_chain: reg_value=0x07006061 chainid 0
Feb 13 17:54:41 (none) local0.notice cgminer[970]: enable_read_temperature_from_asic_chain: reg_value=0x07006061 chainid 1
Feb 13 17:54:41 (none) local0.notice cgminer[970]: enable_read_temperature_from_asic_chain: reg_value=0x07006061 chainid 2
Feb 13 17:54:41 (none) local0.notice cgminer[970]: dev.timeout = 10000000 us
Feb 13 17:54:42 (none) local0.notice cgminer[970]: bitmain_ZCASH_init: fan_eft : 0 fan_pwm : 30
Feb 13 17:54:44 (none) local0.notice cgminer[970]: 421732one
Feb 13 17:54:44 (none) local0.err cgminer[970]: cgminer time error total_secs = 1644774884.602678 last_total_secs = 1.000000
Feb 13 17:54:45 (none) local0.info cgminer[970]: Pool 2 extranonce set to e9de0000
Feb 13 17:54:45 (none) local0.info cgminer[970]: Pool 1 extranonce set to 872d0000
Feb 13 17:54:45 (none) local0.info cgminer[970]: Pool 0 extranonce set to 31c90000
Feb 13 17:54:45 (none) local0.warn cgminer[970]: Pool 1 stratum+tcp://stratum-zec.antpool.com:443 alive, testing stability
Feb 13 17:54:45 (none) local0.warn cgminer[970]: Switching to pool 1 stratum+tcp://stratum-zec.antpool.com:443
Feb 13 17:54:45 (none) local0.warn cgminer[970]: Pool 0 stratum+tcp://stratum-zec.antpool.com:8899 alive, testing stability
Feb 13 17:54:45 (none) local0.warn cgminer[970]: Switching to pool 0 stratum+tcp://stratum-zec.antpool.com:8899
Feb 13 17:54:51 (none) local0.warn cgminer[970]: API running in IP access mode on port 4028 (8)
Feb 13 17:54:59 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:00 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=9f60, chip-crc=3ff7
Feb 13 17:55:00 (none) local0.warn cgminer[970]: receive a error nonce. total = 0
Feb 13 17:55:00 (none) local0.err cgminer[970]: nonceID is different 22 != 23 chipid=0
Feb 13 17:55:00 (none) local0.warn cgminer[970]: receive a error nonce. total = 1
Feb 13 17:55:01 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:01 (none) local0.err cgminer[970]: nonceID is different 4b != 64 chipid=2
Feb 13 17:55:01 (none) local0.warn cgminer[970]: receive a error nonce. total = 2
Feb 13 17:55:02 (none) local0.err cgminer[970]: workID is different 0f != 48
Feb 13 17:55:02 (none) local0.warn cgminer[970]: receive a error nonce. total = 3
Feb 13 17:55:02 (none) local0.err cgminer[970]: workID is different 12 != 46
Feb 13 17:55:02 (none) local0.warn cgminer[970]: receive a error nonce. total = 4
Feb 13 17:55:02 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:03 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=ffac, chip-crc=893b
Feb 13 17:55:03 (none) local0.warn cgminer[970]: receive a error nonce. total = 5
Feb 13 17:55:03 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:03 (none) local0.err cgminer[970]: workID is different 0d != 43
Feb 13 17:55:03 (none) local0.warn cgminer[970]: receive a error nonce. total = 6
Feb 13 17:55:03 (none) local0.err cgminer[970]: workID is different 0f != 48
Feb 13 17:55:03 (none) local0.warn cgminer[970]: receive a error nonce. total = 7
Feb 13 17:55:04 (none) local0.err cgminer[970]: workID is different 12 != 46
Feb 13 17:55:04 (none) local0.warn cgminer[970]: receive a error nonce. total = 8
Feb 13 17:55:04 (none) local0.err cgminer[970]: nonceID is different 48 != 59 chipid=2
Feb 13 17:55:04 (none) local0.warn cgminer[970]: receive a error nonce. total = 9
Feb 13 17:55:04 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=9428, chip-crc=8043
Feb 13 17:55:04 (none) local0.warn cgminer[970]: receive a error nonce. total = 10
Feb 13 17:55:11 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:17 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:17 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=1a5b, chip-crc=b9bb
Feb 13 17:55:17 (none) local0.warn cgminer[970]: receive a error nonce. total = 11
Feb 13 17:55:18 (none) local0.err cgminer[970]: nonceID is different 98 != 9c chipid=0
Feb 13 17:55:18 (none) local0.warn cgminer[970]: receive a error nonce. total = 12
Feb 13 17:55:18 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:18 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=8dd3, chip-crc=8699
Feb 13 17:55:18 (none) local0.warn cgminer[970]: receive a error nonce. total = 13
Feb 13 17:55:18 (none) local0.err cgminer[970]: workID is different 35 != 58
Feb 13 17:55:18 (none) local0.warn cgminer[970]: receive a error nonce. total = 14
Feb 13 17:55:20 (none) local0.err cgminer[970]: workID is different 35 != 58
Feb 13 17:55:20 (none) local0.warn cgminer[970]: receive a error nonce. total = 15
Feb 13 17:55:20 (none) local0.err cgminer[970]: nonceID is different 87 != a2 chipid=0
Feb 13 17:55:20 (none) local0.warn cgminer[970]: receive a error nonce. total = 16
Feb 13 17:55:20 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:20 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:20 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:21 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:21 (none) local0.err cgminer[970]: nonceID is different c3 != cb chipid=2
Feb 13 17:55:21 (none) local0.warn cgminer[970]: receive a error nonce. total = 17
Feb 13 17:55:23 (none) local0.err cgminer[970]: nonceID is different 7f != a3 chipid=1
Feb 13 17:55:23 (none) local0.warn cgminer[970]: receive a error nonce. total = 18
Feb 13 17:55:23 (none) local0.err cgminer[970]: nonceID is different a9 != b9 chipid=1
Feb 13 17:55:23 (none) local0.warn cgminer[970]: receive a error nonce. total = 19
Feb 13 17:55:23 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:23 (none) local0.err cgminer[970]: nonceID is different a5 != b4 chipid=1
Feb 13 17:55:23 (none) local0.warn cgminer[970]: receive a error nonce. total = 20
Feb 13 17:55:28 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:29 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=13a, chip-crc=5cd6
Feb 13 17:55:29 (none) local0.warn cgminer[970]: receive a error nonce. total = 21
Feb 13 17:55:29 (none) local0.err cgminer[970]: nonceID is different f3 != f8 chipid=2
Feb 13 17:55:29 (none) local0.warn cgminer[970]: receive a error nonce. total = 22
Feb 13 17:55:29 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:29 (none) local0.err cgminer[970]: nonceID is different bd != c7 chipid=0
Feb 13 17:55:29 (none) local0.warn cgminer[970]: receive a error nonce. total = 23
Feb 13 17:55:31 (none) local0.err cgminer[970]: nonceID is different dd != ed chipid=1
Feb 13 17:55:31 (none) local0.warn cgminer[970]: receive a error nonce. total = 24
Feb 13 17:55:31 (none) local0.err cgminer[970]: nonceID is different c5 != c9 chipid=1
Feb 13 17:55:31 (none) local0.warn cgminer[970]: receive a error nonce. total = 25
Feb 13 17:55:31 (none) local0.err cgminer[970]: nonceID is different c7 != d2 chipid=0
Feb 13 17:55:31 (none) local0.warn cgminer[970]: receive a error nonce. total = 26
Feb 13 17:55:40 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:42 (none) local0.err cgminer[970]: nonceID is different 0e != 1b chipid=0
Feb 13 17:55:42 (none) local0.warn cgminer[970]: receive a error nonce. total = 27
Feb 13 17:55:42 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:42 (none) local0.err cgminer[970]: nonceID is different 15 != 1c chipid=1
Feb 13 17:55:42 (none) local0.warn cgminer[970]: receive a error nonce. total = 28
Feb 13 17:55:42 (none) local0.err cgminer[970]: reg_handle CRC error crc = 03
Feb 13 17:55:42 (none) local0.err cgminer[970]: nonceID is different 08 != 00 chipid=0
Feb 13 17:55:42 (none) local0.warn cgminer[970]: receive a error nonce. total = 29
Feb 13 17:55:42 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:42 (none) local0.err cgminer[970]: nonceID is different fb != 03 chipid=1
Feb 13 17:55:42 (none) local0.warn cgminer[970]: receive a error nonce. total = 30
Feb 13 17:55:43 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=2146, chip-crc=3013
Feb 13 17:55:43 (none) local0.warn cgminer[970]: receive a error nonce. total = 31
Feb 13 17:55:44 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:44 (none) local0.err cgminer[970]: nonceID is different 61 != 66 chipid=2
Feb 13 17:55:44 (none) local0.warn cgminer[970]: receive a error nonce. total = 32
Feb 13 17:55:45 (none) local0.err cgminer[970]: nonceID is different 26 != 48 chipid=2
Feb 13 17:55:45 (none) local0.warn cgminer[970]: receive a error nonce. total = 33
Feb 13 17:55:45 (none) local0.err cgminer[970]: nonceID is different 49 != 50 chipid=2
Feb 13 17:55:45 (none) local0.warn cgminer[970]: receive a error nonce. total = 34
Feb 13 17:55:45 (none) local0.err cgminer[970]: nonceID is different 1d != 2a chipid=1
Feb 13 17:55:45 (none) local0.warn cgminer[970]: receive a error nonce. total = 35
Feb 13 17:55:45 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:45 (none) local0.err cgminer[970]: nonceID is different 2f != 36 chipid=2
Feb 13 17:55:45 (none) local0.warn cgminer[970]: receive a error nonce. total = 36
Feb 13 17:55:45 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:45 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:45 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:52 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:52 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:53 (none) local0.err cgminer[970]: nonceID is different a7 != ac chipid=2
Feb 13 17:55:53 (none) local0.warn cgminer[970]: receive a error nonce. total = 37
Feb 13 17:55:53 (none) local0.err cgminer[970]: nonceID is different 6b != 6d chipid=1
Feb 13 17:55:53 (none) local0.warn cgminer[970]: receive a error nonce. total = 38
Feb 13 17:55:53 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=941f, chip-crc=962b
Feb 13 17:55:53 (none) local0.warn cgminer[970]: receive a error nonce. total = 39
Feb 13 17:55:53 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:53 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:53 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:53 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:53 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:53 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:54 (none) local0.err cgminer[970]: nonceID is different ad != b0 chipid=2
Feb 13 17:55:54 (none) local0.warn cgminer[970]: receive a error nonce. total = 40
Feb 13 17:55:54 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:54 (none) local0.err cgminer[970]: nonceID is different 59 != 5b chipid=0
Feb 13 17:55:54 (none) local0.warn cgminer[970]: receive a error nonce. total = 41
Feb 13 17:55:54 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:54 (none) local0.err cgminer[970]: nonceID is different 2a != 30 chipid=1
Feb 13 17:55:54 (none) local0.warn cgminer[970]: receive a error nonce. total = 42
Feb 13 17:55:55 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:56 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=5ee2, chip-crc=5dd6
Feb 13 17:55:56 (none) local0.warn cgminer[970]: receive a error nonce. total = 43
Feb 13 17:55:57 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=941f, chip-crc=962b
Feb 13 17:55:57 (none) local0.warn cgminer[970]: receive a error nonce. total = 44
Feb 13 17:55:57 (none) local0.err cgminer[970]: nonceID is different b1 != c3 chipid=2
Feb 13 17:55:57 (none) local0.warn cgminer[970]: receive a error nonce. total = 45
Feb 13 17:55:57 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:57 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:55:57 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=5ee2, chip-crc=5dd6
Feb 13 17:55:57 (none) local0.warn cgminer[970]: receive a error nonce. total = 46
Feb 13 17:56:04 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:04 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:04 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=eaea, chip-crc=12a9
Feb 13 17:56:04 (none) local0.warn cgminer[970]: receive a error nonce. total = 47
Feb 13 17:56:04 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:04 (none) local0.err cgminer[970]: nonceID is different 24 != 28 chipid=2
Feb 13 17:56:04 (none) local0.warn cgminer[970]: receive a error nonce. total = 48
Feb 13 17:56:05 (none) local0.err cgminer[970]: nonceID is different 8c != 90 chipid=0
Feb 13 17:56:05 (none) local0.warn cgminer[970]: receive a error nonce. total = 49
Feb 13 17:56:05 (none) local0.err cgminer[970]: nonceID is different a2 != aa chipid=1
Feb 13 17:56:05 (none) local0.warn cgminer[970]: receive a error nonce. total = 50
Feb 13 17:56:06 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:06 (none) local0.err cgminer[970]: nonceID is different fb != 10 chipid=2
Feb 13 17:56:06 (none) local0.warn cgminer[970]: receive a error nonce. total = 51
Feb 13 17:56:07 (none) local0.err cgminer[970]: nonceID is different 2a != 53 chipid=2
Feb 13 17:56:07 (none) local0.warn cgminer[970]: receive a error nonce. total = 52
Feb 13 17:56:07 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:07 (none) local0.err cgminer[970]: nonceID is different 9b != a3 chipid=2
Feb 13 17:56:07 (none) local0.warn cgminer[970]: receive a error nonce. total = 53
Feb 13 17:56:07 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=3745, chip-crc=550d
Feb 13 17:56:07 (none) local0.warn cgminer[970]: receive a error nonce. total = 54
Feb 13 17:56:07 (none) local0.err cgminer[970]: nonceID is different 8d != 9d chipid=1
Feb 13 17:56:07 (none) local0.warn cgminer[970]: receive a error nonce. total = 55
Feb 13 17:56:07 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:07 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:07 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:07 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:07 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:07 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:16 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:16 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=289f, chip-crc=e02d
Feb 13 17:56:16 (none) local0.warn cgminer[970]: receive a error nonce. total = 56
Feb 13 17:56:16 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:16 (none) local0.err cgminer[970]: nonceID is different ae != b1 chipid=1
Feb 13 17:56:16 (none) local0.warn cgminer[970]: receive a error nonce. total = 57
Feb 13 17:56:17 (none) local0.err cgminer[970]: nonceID is different d4 != d5 chipid=0
Feb 13 17:56:17 (none) local0.warn cgminer[970]: receive a error nonce. total = 58
Feb 13 17:56:18 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:18 (none) local0.err cgminer[970]: nonceID is different 53 != 57 chipid=2
Feb 13 17:56:18 (none) local0.warn cgminer[970]: receive a error nonce. total = 59
Feb 13 17:56:18 (none) local0.err cgminer[970]: nonceID is different c9 != d1 chipid=0
Feb 13 17:56:18 (none) local0.warn cgminer[970]: receive a error nonce. total = 60
Feb 13 17:56:19 (none) local0.err cgminer[970]: workID is different 6c != 2b
Feb 13 17:56:19 (none) local0.warn cgminer[970]: receive a error nonce. total = 61
Feb 13 17:56:19 (none) local0.err cgminer[970]: nonceID is different df != e5 chipid=2
Feb 13 17:56:19 (none) local0.warn cgminer[970]: receive a error nonce. total = 62
Feb 13 17:56:19 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:19 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:19 (none) local0.err cgminer[970]: workID is different 38 != 29
Feb 13 17:56:19 (none) local0.warn cgminer[970]: receive a error nonce. total = 63
Feb 13 17:56:19 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:19 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:19 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:20 (none) local0.err cgminer[970]: bm1740_verify_nonce_integrality CRC error. cal-crc=6271, chip-crc=de7e
Feb 13 17:56:20 (none) local0.warn cgminer[970]: receive a error nonce. total = 64
Feb 13 17:56:20 (none) local0.err cgminer[970]: nonceID is different da != df chipid=0
Feb 13 17:56:20 (none) local0.warn cgminer[970]: receive a error nonce. total = 65
Feb 13 17:56:20 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:21 (none) local0.err cgminer[970]: nonceID is different ea != ec chipid=0
Feb 13 17:56:21 (none) local0.warn cgminer[970]: receive a error nonce. total = 66
Feb 13 17:56:21 (none) local0.err cgminer[970]: read_temp_func: Chain2 sensor0 remote temp is 113 `C, higher than MAX_CHIP_TEMP
Feb 13 17:56:21 (none) local0.err cgminer[970]: Temperature pcb:78/chip:113 is higher than 80/110'C for 1 time, PWM is 100
Feb 13 17:56:22 (none) local0.err cgminer[970]: workID is different 6c != 2b
Feb 13 17:56:22 (none) local0.warn cgminer[970]: receive a error nonce. total = 67
Feb 13 17:56:22 (none) local0.err cgminer[970]: nonceID is different fe != 03 chipid=2
Feb 13 17:56:22 (none) local0.warn cgminer[970]: receive a error nonce. total = 68
Feb 13 17:56:22 (none) local0.err cgminer[970]: nonceID is different 71 != 84 chipid=2
Feb 13 17:56:22 (none) local0.warn cgminer[970]: receive a error nonce. total = 69
Feb 13 17:56:22 (none) local0.err cgminer[970]: nonceID is different ef != f5 chipid=2
Feb 13 17:56:22 (none) local0.warn cgminer[970]: receive a error nonce. total = 70
Feb 13 17:56:22 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:22 (none) local0.warn cgminer[970]: nonce_handle: nonce fifo full!!!
Feb 13 17:56:22 (none) local0.err cgminer[970]: Temperature pcb:78/chip:113 is higher than 80/110'C for 2 time, PWM is 100
Feb 13 17:56:23 (none) local0.err cgminer[970]: check_miner_status: the temperature pcb:78/chip:113 is too high, close PIC and need reboot!!!
Feb 13 17:56:24 (none) local0.notice cgminer[970]: disable_PIC16F1704_dc_dc_new ok
Feb 13 17:56:24 (none) local0.notice cgminer[970]: disable_PIC16F1704_dc_dc_new ok
Feb 13 17:56:24 (none) local0.notice cgminer[970]: disable_PIC16F1704_dc_dc_new ok -
I have flashed a new firmware without the SD card and the result is:
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-g0387054-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #45 SMP PREEMPT Wed Jun 19 15:03:51 CST 2019
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b3c280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s20032 r8192 d20928 u49152
pcpu-alloc: s20032 r8192 d20928 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203836K/245760K available (6348K kernel code, 243K rwdata, 1928K rodata, 1024K init, 233K bss, 25540K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0915150 (9269 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b3cfe0 ( 244 kB)
.bss : 0xc0b3cfe0 - 0xc0b77428 ( 234 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12476K (cced3000 - cdb02000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
5 ofpart partitions found on MTD device pl35x-nand
Creating 5 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcf9cc000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
Feb 13 18:36:12 (none) local0.err cgminer: Miner compile time: Fri Jul 3 11:39:06 CST 2020 type: Antminer Z15
Feb 13 18:36:12 (none) local0.warn cgminer: Started cgminer 4.9.0
Feb 13 18:36:12 (none) local0.notice cgminer[971]: z15 init...
Feb 13 18:36:12 (none) local0.notice cgminer[971]: httpListenThread start ret=0
Feb 13 18:36:14 (none) local0.notice cgminer[971]: FPGA version: B031
Feb 13 18:36:14 (none) local0.notice cgminer[971]: No 2 Fan find, check again
Feb 13 18:36:15 (none) local0.notice cgminer[971]: fan-num 2 fan-map 3
Feb 13 18:36:15 (none) local0.notice cgminer[971]: check_chain
Feb 13 18:36:15 (none) local0.notice cgminer[971]: Chain 0 existed!
Feb 13 18:36:15 (none) local0.notice cgminer[971]: Chain 1 existed!
Feb 13 18:36:15 (none) local0.notice cgminer[971]: Chain 2 existed!
Feb 13 18:36:15 (none) local0.notice cgminer[971]: chain0 every_chain_reset_PIC16F1704_pic_new
Feb 13 18:36:16 (none) local0.notice cgminer[971]: reset_PIC16F1704_pic_new ok
Feb 13 18:36:17 (none) local0.notice cgminer[971]: chain1 every_chain_reset_PIC16F1704_pic_new
Feb 13 18:36:18 (none) local0.notice cgminer[971]: reset_PIC16F1704_pic_new ok
Feb 13 18:36:18 (none) local0.notice cgminer[971]: chain2 every_chain_reset_PIC16F1704_pic_new
Feb 13 18:36:19 (none) local0.notice cgminer[971]: reset_PIC16F1704_pic_new ok
Feb 13 18:36:20 (none) local0.notice cgminer[971]: chain0 every_chain_jump_from_loader_to_app_PIC16F1704_new
Feb 13 18:36:20 (none) local0.notice cgminer[971]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 13 18:36:20 (none) local0.notice cgminer[971]: chain1 every_chain_jump_from_loader_to_app_PIC16F1704_new
Feb 13 18:36:21 (none) local0.notice cgminer[971]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 13 18:36:21 (none) local0.notice cgminer[971]: chain2 every_chain_jump_from_loader_to_app_PIC16F1704_new
Feb 13 18:36:21 (none) local0.notice cgminer[971]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 13 18:36:23 (none) local0.notice cgminer[971]: reset_all_hash_board_low 4386
Feb 13 18:36:23 (none) local0.notice cgminer[971]: pic_heart_beat_func_new
Feb 13 18:36:23 (none) local0.notice cgminer[971]: every_chain_disable_PIC16F1704_dc_dc_new
Feb 13 18:36:23 (none) local0.notice cgminer[971]: disable_PIC16F1704_dc_dc_new ok
Feb 13 18:36:23 (none) local0.notice cgminer[971]: disable_PIC16F1704_dc_dc_new ok
Feb 13 18:36:23 (none) local0.notice cgminer[971]: disable_PIC16F1704_dc_dc_new ok
Feb 13 18:36:24 (none) local0.notice cgminer[971]: every_chain_enable_PIC16F1704_dc_dc_new
Feb 13 18:36:25 (none) local0.notice cgminer[971]: enable_PIC16F1704_dc_dc_new ok
Feb 13 18:36:25 (none) local0.notice cgminer[971]: enable_PIC16F1704_dc_dc_new ok
Feb 13 18:36:25 (none) local0.notice cgminer[971]: enable_PIC16F1704_dc_dc_new ok
Feb 13 18:36:26 (none) local0.notice cgminer[971]: reset_all_hash_board_high 4392
Feb 13 18:36:26 (none) local0.notice cgminer[971]: tty_init
Feb 13 18:36:26 (none) local0.notice cgminer[971]: tty_init_chain chainid = 0
Feb 13 18:36:26 (none) local0.err cgminer[971]: create rx read thread for chain 0 ok
Feb 13 18:36:26 (none) local0.notice cgminer[971]: Start A New Asic Response.Chain Id:[0]
Feb 13 18:36:26 (none) local0.err cgminer[971]: create tx read thread for chain 0 ok
Feb 13 18:36:26 (none) local0.notice cgminer[971]: open device over
Feb 13 18:36:26 (none) local0.notice cgminer[971]: tty_init_chain chainid = 1
Feb 13 18:36:26 (none) local0.err cgminer[971]: create rx read thread for chain 1 ok
Feb 13 18:36:26 (none) local0.notice cgminer[971]: Start A New Asic Response.Chain Id:[1]
Feb 13 18:36:26 (none) local0.err cgminer[971]: create tx read thread for chain 1 ok
Feb 13 18:36:26 (none) local0.notice cgminer[971]: open device over
Feb 13 18:36:26 (none) local0.notice cgminer[971]: tty_init_chain chainid = 2
Feb 13 18:36:26 (none) local0.err cgminer[971]: create rx read thread for chain 2 ok
Feb 13 18:36:26 (none) local0.notice cgminer[971]: Start A New Asic Response.Chain Id:[2]
Feb 13 18:36:26 (none) local0.err cgminer[971]: create tx read thread for chain 2 ok
Feb 13 18:36:26 (none) local0.notice cgminer[971]: open device over
Feb 13 18:36:31 (none) local0.notice cgminer[971]: calculate_address_interval:addrInterval = 64
Feb 13 18:36:33 (none) local0.notice cgminer[971]: check_every_chain_asic_number
Feb 13 18:36:34 (none) local0.notice cgminer[971]: check_asic_reg: chain J0 has 3 ASIC
Feb 13 18:36:36 (none) local0.notice cgminer[971]: check_asic_reg: chain J1 has 3 ASIC
Feb 13 18:36:37 (none) local0.notice cgminer[971]: check_asic_reg: chain J2 has 3 ASIC
Feb 13 18:36:38 (none) local0.notice cgminer[971]: chain0 pic version 04
Feb 13 18:36:39 (none) local0.notice cgminer[971]: chain1 pic version 04
Feb 13 18:36:39 (none) local0.notice cgminer[971]: chain2 pic version 04
Feb 13 18:36:41 (none) local0.notice cgminer[971]: pic read chain0 asic0 freq 412
Feb 13 18:36:41 (none) local0.notice cgminer[971]: pic read chain0 asic1 freq 1919905904
Feb 13 18:36:41 (none) local0.notice cgminer[971]: pic read chain0 asic2 freq 0
Feb 13 18:36:41 (none) local0.notice cgminer[971]: pic read chain1 asic0 freq 1936028255
Feb 13 18:36:41 (none) local0.notice cgminer[971]: pic read chain1 asic1 freq 1886217588
Feb 13 18:36:41 (none) local0.notice cgminer[971]: pic read chain1 asic2 freq 1918855283
Feb 13 18:36:41 (none) local0.notice cgminer[971]: pic read chain2 asic0 freq 0
Feb 13 18:36:41 (none) local0.notice cgminer[971]: pic read chain2 asic1 freq 1852399477
Feb 13 18:36:41 (none) local0.notice cgminer[971]: pic read chain2 asic2 freq 420
Feb 13 18:36:41 (none) local0.notice cgminer[971]: 1 Goto turbo mode
Feb 13 18:36:41 (none) local0.notice cgminer[971]: set_ticket_mask_chain chainID0 ticket_mask = 0x00000010
Feb 13 18:36:41 (none) local0.notice cgminer[971]: set_ticket_mask_chain chainID1 ticket_mask = 0x00000010
Feb 13 18:36:41 (none) local0.notice cgminer[971]: set_ticket_mask_chain chainID2 ticket_mask = 0x00000010
Feb 13 18:36:41 (none) local0.notice cgminer[971]: software_set_address_chain chainID0 asics 3 addrInterval 64
Feb 13 18:36:42 (none) local0.notice cgminer[971]: software_set_address_chain chainID1 asics 3 addrInterval 64
Feb 13 18:36:42 (none) local0.notice cgminer[971]: software_set_address_chain chainID2 asics 3 addrInterval 64
Feb 13 18:36:42 (none) local0.notice cgminer[971]: start listen on 6060 ...
Feb 13 18:36:42 (none) local0.notice cgminer[971]: enable_read_temperature_from_asic_chain: reg_value=0x07006061 chainid 0
Feb 13 18:36:42 (none) local0.notice cgminer[971]: enable_read_temperature_from_asic_chain: reg_value=0x07006061 chainid 1
Feb 13 18:36:43 (none) local0.notice cgminer[971]: enable_read_temperature_from_asic_chain: reg_value=0x07006061 chainid 2
Feb 13 18:36:43 (none) local0.notice cgminer[971]: chainid0 set_analog_mux_control_chain: analog mux = 00000000
Feb 13 18:36:43 (none) local0.notice cgminer[971]: chainid1 set_analog_mux_control_chain: analog mux = 00000000
Feb 13 18:36:43 (none) local0.notice cgminer[971]: chainid2 set_analog_mux_control_chain: analog mux = 00000000
Feb 13 18:36:43 (none) local0.notice cgminer[971]: dev.timeout = 100000000 us
Feb 13 18:36:43 (none) local0.notice cgminer[971]: bitmain_ZCASH_init: fan_eft : 0 fan_pwm : 50
Feb 13 18:36:46 (none) local0.notice cgminer[971]: bitmain_ZCASH_init done
Feb 13 18:36:46 (none) local0.err cgminer[971]: cgminer time error total_secs = 1644777406.691505 last_total_secs = 1.000000
Feb 13 18:36:47 (none) local0.info cgminer[971]: Pool 1 extranonce set to a7280000
Feb 13 18:36:47 (none) local0.info cgminer[971]: Pool 2 extranonce set to e9d90000
Feb 13 18:36:47 (none) local0.info cgminer[971]: Pool 0 extranonce set to 482e0000
Feb 13 18:36:47 (none) local0.notice cgminer[971]: stime.tv_sec 1644777407, block_ntime 1644777389
Feb 13 18:36:48 (none) local0.warn cgminer[971]: Pool 0 stratum+tcp://stratum-zec.antpool.com:8899 alive, testing stability
Feb 13 18:36:48 (none) local0.warn cgminer[971]: Switching to pool 0 stratum+tcp://stratum-zec.antpool.com:8899
Feb 13 18:36:53 (none) local0.warn cgminer[971]: API running in IP access mode on port 4028 (9)
Feb 13 18:36:54 (none) local0.notice cgminer[971]: All asics arrive target freq
Feb 13 18:38:29 (none) local0.err cgminer[971]: read_temp_func: Chain2 sensor0 remote temp is 113 `C, higher than MAX_CHIP_TEMP
Feb 13 18:38:30 (none) local0.err cgminer[971]: Temperature pcb:73/chip:113 is higher than 80/110'C for 1 time, PWM is 100
Feb 13 18:38:31 (none) local0.err cgminer[971]: Temperature pcb:73/chip:113 is higher than 80/110'C for 2 time, PWM is 100
Feb 13 18:38:32 (none) local0.err cgminer[971]: check_miner_status: the temperature pcb:73/chip:113 is too high, close PIC and need reboot!!!
Feb 13 18:38:32 (none) local0.notice cgminer[971]: disable_PIC16F1704_dc_dc_new ok
Feb 13 18:38:33 (none) local0.notice cgminer[971]: disable_PIC16F1704_dc_dc_new ok
Feb 13 18:38:33 (none) local0.notice cgminer[971]: disable_PIC16F1704_dc_dc_new ok
Feb 13 18:48:59 (none) local0.info cgminer[971]: Pool 0 extranonce set to 5fe70000 -
Hello,
I have the same issue with my Z15
May 20 16:49:38 (none) local0.err cgminer[971]: read_temp_func: Chain0 sensor2 remote temp is 111 `C, higher than MAX_CHIP_TEMP
May 20 16:49:39 (none) local0.err cgminer[971]: Temperature pcb:73/chip:111 is higher than 80/110'C for 1 time, PWM is 100
May 20 16:49:40 (none) local0.err cgminer[971]: Temperature pcb:73/chip:111 is higher than 80/110'C for 2 time, PWM is 100
May 20 16:49:41 (none) local0.err cgminer[971]: check_miner_status: the temperature pcb:73/chip:111 is too high, close PIC and need reboot!!!
May 20 16:49:41 (none) local0.notice cgminer[971]: disable_PIC16F1704_dc_dc_new ok
May 20 16:49:41 (none) local0.notice cgminer[971]: disable_PIC16F1704_dc_dc_new ok
May 20 16:49:41 (none) local0.notice cgminer[971]: disable_PIC16F1704_dc_dc_new ok
I have already invested 400 USD by sending the miner to bitmain twice but they have not fixed it. They fixed "something" on a hasboard and then they replaced the PSU, but the error was not fixed.
What has solved it for you?
Cheers
Leon
-
Dear Customer,
If you have any questions please feel free to contact us.
Please creat support ticket by https://support.bitmain.com/hc/en-us/requests/new
Or send email to customersupport@bitmain.com
We will reply to your question as soon as possible.
请先登录再写评论。
评论
8 条评论