antminer t17e
已回答
I get no data on miner status page. Not even zeros.
-
正式评论
Dear
Could you send us full kernel log after the miner running 20-30 mins , after double checked with technical engineer we will advise you the solutions and advice.
Kernel log will always show the real reason issue for the antminer.
https://support.bitmain.com/hc/en-us/articles/360016522253-How-to-copy-Kernel-Log-into-text-form评论操作 -
this is my overview page
Miner Type Antminer T17e Hostname antMiner Model GNU/Linux Hardware Version Socket connect failed: Connection refused Kernel Version Linux 4.6.0-xilinx-gff8137b-dirty #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 File System Version Fri Jan 8 22:35:06 CST 2021 CGminer Version Uptime 0:01, 0 users Load Average 0.06, 0.04, 0.02 -
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 20632K (cc6db000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
nand: Macronix MX30LF2GE8AB
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x00000ff60000
nand_read_bbt: bad block at 0x00000ff80000
nand_read_bbt: bad block at 0x00000ffa0000
nand_read_bbt: bad block at 0x00000ffc0000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 512 (aligned 512), data offset: 2048
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 21/9, WL threshold: 4096, image sequence number: 2971759534
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID F7881EBB-2758-4606-B9D9-7F3EEAB37253, small LPT model
ubi1: attaching mtd5
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 423:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 423:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 423:0, read only 64 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 423:0, read 64 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406050>] (ubi_io_read_ec_hdr+0x68/0x1cc)
[<c0406050>] (ubi_io_read_ec_hdr) from [<c040a1d4>] (ubi_attach+0x130/0x1194)
[<c040a1d4>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8)
[<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec)
[<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34)
[<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0)
[<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c)
[<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 423:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 423:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 423:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 423:512, read 512 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c040a290>] (ubi_attach+0x1ec/0x1194)
[<c040a290>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8)
[<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec)
[<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34)
[<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0)
[<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c)
[<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c)
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi1: VID header offset: 512 (aligned 512), data offset: 2048
ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 11875/9655, WL threshold: 4096, image sequence number: 1857823607
ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35
ubi1: background thread "ubi_bgt1d" started, PID 720
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 423:512, read only 512 bytes, retry
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 423:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 423:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 423:512, read 512 bytes
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B08F051B-2357-4CFE-957E-608EF71E3E17, small LPT model
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0)
[<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100)
[<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190)
[<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0)
[<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c)
ubi1: scrubbed PEB 423 (LEB 0:361), data moved to PEB 205
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb5c000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2021-09-17 19:49:40:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 19:49:40:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 19:49:40:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 19:49:40:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 19:49:40:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 19:49:40:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 19:50:39:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 19:50:39:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 19:50:50:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 19:50:50:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 19:50:50:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 19:50:50:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 19:50:50:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 19:50:50:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 19:51:49:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 19:51:49:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 19:52:00:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 19:52:00:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 19:52:00:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 19:52:00:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 19:52:00:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 19:52:00:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 19:52:59:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 19:52:59:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 19:53:11:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 19:53:11:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 19:53:11:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 19:53:11:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 19:53:11:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 19:53:11:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 19:54:10:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 19:54:10:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 19:54:21:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 19:54:21:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 19:54:21:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 19:54:21:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 19:54:21:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 19:54:21:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 19:55:20:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 19:55:20:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 19:55:31:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 19:55:31:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 19:55:31:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 19:55:31:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 19:55:31:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 19:55:31:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 19:56:30:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 19:56:30:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 19:56:41:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 19:56:41:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 19:56:41:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 19:56:41:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 19:56:41:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 19:56:41:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 19:57:40:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 19:57:40:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 19:57:52:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 19:57:52:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 19:57:52:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 19:57:52:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 19:57:52:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 19:57:52:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 19:58:51:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 19:58:51:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 19:59:02:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 19:59:02:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 19:59:02:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 19:59:02:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 19:59:02:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 19:59:02:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 20:00:01:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 20:00:01:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 20:00:12:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 20:00:12:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 20:00:12:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 20:00:12:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 20:00:12:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 20:00:12:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 20:01:11:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 20:01:11:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 20:01:23:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 20:01:23:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 20:01:23:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 20:01:23:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 20:01:23:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 20:01:23:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 20:02:22:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 20:02:22:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 20:02:33:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 20:02:33:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 20:02:33:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 20:02:33:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 20:02:33:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 20:02:33:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 20:03:32:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 20:03:32:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 20:03:43:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 20:03:43:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 20:03:43:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 20:03:43:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 20:03:43:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 20:03:43:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 20:04:42:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 20:04:42:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 20:04:53:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 20:04:53:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 20:04:53:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 20:04:53:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 20:04:53:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 20:04:53:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 20:05:52:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 20:05:52:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 20:06:04:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 20:06:04:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 20:06:04:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 20:06:04:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 20:06:04:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 20:06:04:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 20:07:03:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 20:07:03:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 20:07:14:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 20:07:14:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 20:07:14:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 20:07:14:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 20:07:14:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 20:07:14:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 20:08:13:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 20:08:13:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 20:08:24:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 20:08:24:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 20:08:24:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 20:08:24:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 20:08:24:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 20:08:24:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 20:09:23:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 20:09:23:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 20:09:35:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 20:09:35:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 20:09:35:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 20:09:35:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 20:09:35:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 20:09:35:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 20:10:34:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 20:10:34:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 20:10:45:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 20:10:45:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 20:10:45:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 20:10:45:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 20:10:45:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 20:10:45:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds.
2021-09-17 20:11:44:driver-btm-api.c:208:set_miner_status: CHECK_NET_ERROR_NET
2021-09-17 20:11:44:thread.c:487:check_system_work_thread: ERROR: pools connection is not detected. exit code 1.
2021-09-17 20:11:55:fan.c:287:front_fan_power_on: Note: front fan is power on!
2021-09-17 20:11:55:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
2021-09-17 20:11:55:thread.c:1076:create_check_system_status_thread: create thread
2021-09-17 20:11:55:driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-09-17 20:11:55:driver-btm-c5_socketb.c:353:bitmain_soc_prepare: bitmain_soc_init return 1
2021-09-17 20:11:55:thread.c:476:check_system_work_thread: Wait for pools' job for 60 seconds. -
I have another miner (S9) which work normally on the same set up. But I changed anyways to different way. But
same results. Still no data not even zeros on status page. What about the kernel log I sent you ? Did you analyze it ? I am going to try to take the miner to different location but it will take some time.
Thanks
-
You are very welcome, if you have any problem you could contact us by support-cs@bitmain.com.
请先登录再写评论。
评论
10 条评论