S19j Pro Firmware

已回答

评论

7 条评论

  • 正式评论

    Dear

    Could you send us full kernel log after the miner running 20-30 mins , after double checked with technical engineer we will advise you the solutions and advice.

    Kernel log will always show the real reason issue for the antminer.

    https://support.bitmain.com/hc/en-us/articles/360016522253-How-to-copy-Kernel-Log-into-text-form

    评论操作 固定链接

    Hi Bitmain support, we are having the same problem after following instruction from your support team. 

    The S19j Pro (7007) SD card recovery package is actually the S19j (not Pro) package.  Both "update.bmu" checksums are identical in these packages.  YIKES!

    Please send the correct S19j Pro 100T (7007) recovery to niftyframes@protonmail.com

    Also, please pull and re-publish the correct SD recovery package "Antminer-S19j-Pro-Release-sd2nand-zynq7007-20210605.zip".  This problematic package has been posted since 2021-08-26.

    Our S19j Pro is unable to mine until this is resolved.  All three reset options _do not_ restore the factory firmware.  We are unable to upload the "Antminer-S19j-Pro-release-202106281212.bin" using the Web GUI because the miner thinks its a S19j (not Pro).  Web GUI refreshes without upload confirmation.

    This is an urgent matter for your clientele.

    2
    评论操作 固定链接

    I am having the same problem, after applying the firmware upgrade the S19 will no longer hash :(

    • Firmware Version Sat May 15 21:17:18 CST 2021 is bad, calculates temperature wrong

    1
    评论操作 固定链接

    I have the same problem. Could you send the correct file of recovery for s19j pro SD card to email alexandrbelkin87@gmail.com?

    0
    评论操作 固定链接

    Hello, please refer to following link to download it

    https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image

    0
    评论操作 固定链接

    how do you know which control board you have?

    0
    评论操作 固定链接

    How do I know which control board I have?

    0
    评论操作 固定链接

请先登录再写评论。