Antminer S19 - ERROR_POWER_LOST and ERROR_SOC_INIT

已回答

评论

2 条评论

  • 正式评论

    Dear

    Could you please firstly change a good PSU to test it firstly which showed ERROR_POWER_LOST: get power type version failed! in your kernel log.

    评论操作 固定链接

    I measured the output voltage V=0. I understood that the power supply died, but it's new! S19 was standing, working, giving out 95Th and it was pulled out of the socket and after that it behaves as I wrote. I doubt that this could have affected..

    0
    评论操作 固定链接

请先登录再写评论。