S19J PRO 96t Abnormal Hash Rate

已回答

评论

15 条评论

  • 正式评论

    Dear

    Your log is incomplete. Can you send a complete kernel log after waiting for the machine to run longer, because the end of the kernel log will show what the fault is. Thank you for your cooperation and wait for your complete kernel log.

    评论操作 固定链接

    already did, many times. Definitely not working. After updating to the firmware file my miner stopped working. After many request, I still have not received the correct firmware BIN file for my miner, please see my notes below:

     

    I need the following firmware versions below currently: 

    Fri May 28 17:43:03 CST 2021 ( I am 100% certain this is the correct firmware I need to get my miner back and working) Please send As soon as possible 

    Fri Jun 4 12:33:07 (posted from another user, this a different version then what is posted on the official bitmain website

     

     ** To be extra clear.... when you look at my first logs from when my miner was first received and working, my firmware was dated:

    1970-01-01 00:00:09 Miner compile time: Fri May 28 17:43:03 CST 2021 type: Antminer S19j Pro

    You can confirm this by looking at the very first logs I ever posted 

     

     

     

     

    1
    评论操作 固定链接

    Dear

    We checked our Lisa are double checking it for you by email .she will let you how to do once available , thanks for your patience.

    1
    评论操作 固定链接

    Hello Again,

    Do you or Lisa have an estimate for how much longer it will take to receive the following firmware version:  Fri May 28 17:43:03 CST 2021? 

    Really Eager to get the firmware file so I can get my miner back online. 

    Thanks!

    1
    评论操作 固定链接

    BEWARE!

    DO NOT INSTALL the S19j Pro SD card recovery package.  It has BRICKED our miner!

    • Antminer-S19j-Pro-Release-sd2nand-zynq7007-20210605.zip (file size 26.87MB)
    • S19j Pro SD firmware for 7007 control board only (published 2021-08-26)

    This package is identical to the S19j package.  We have compared and match both packages' "update.bmu" file checksums.  Your miner will not be able to detect hash boards, reset to factory default firmware, or update to the Antminer-S19j-Pro-release-202106281212.bin firmware.  Effectively rendering your equipment useless.

    Bitmain support, please send the correct S19j Pro 100T (7007) recovery to niftyframes@protonmail.com

    1
    评论操作 固定链接

    Hello Jessica!

    Yes I can, I have attached the complete "Current log" and will post the historical log right after 

     

    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
      Normal zone: 480 pages used for memmap
      Normal zone: 0 pages reserved
      Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
    pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1 
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 209676K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19700K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
        vector  : 0xffff0000 - 0xffff1000   (   4 kB)
        fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
        vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
        lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
        pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
        modules : 0xbf000000 - 0xbfe00000   (  14 MB)
          .text : 0xc0008000 - 0xc090e410   (9242 kB)
          .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
          .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
           .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
    Preemptible hierarchical RCU implementation.
    	Build-time adjustment of leaf fanout to 32.
    	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 6628K (cd480000 - cdaf9000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: disable subpage write
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: NAND_ECC_HW
    nand: NAND_ECC_HW_SYNDROME
    mtd->writesize = 2048
    ecc->strength = 1
    ecc->size = 2048
    mtd->writesize = 2048
    chip->ecc_strength_ds = 4
    chip->ecc_step_ds = 512
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    nand_read_bbt: bad block at 0x000002420000
    nand_read_bbt: bad block at 0x000002440000
    nand_read_bbt: bad block at 0x000002460000
    8 ofpart partitions found on MTD device pl35x-nand
    Creating 8 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000005200000 : "sig"
    0x000005200000-0x000006000000 : "reserve1"
    0x000006000000-0x000007000000 : "upgrade-ramfs"
    0x000007000000-0x00000a800000 : "upgrade-file"
    0x00000a800000-0x000010000000 : "reserve2"
    nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
    ip_tables: (C) 2000-2006 Netfilter Core Team
    NET: Registered protocol family 10
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
      No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
    devpts: called with bogus options
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1285939732
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
    ubi0: background thread "ubi_bgt0d" started, PID 729
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
    UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 755691A8-ABD6-4BFE-A950-439F3B8D2085, small LPT model
    ubi2: attaching mtd4
    ubi2: scanning is finished
    ubi2: attached mtd4 (name "reserve1", size 14 MiB)
    ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
    ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi2: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 46785079
    ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
    ubi2: background thread "ubi_bgt2d" started, PID 740
    UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
    UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
    UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
    UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
    UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 51B0F1D7-3BD2-4F4A-ADE8-8347ABAE84AB, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    random: avahi-daemon urandom read with 2 bits of entropy available
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfbc8000
    *base_vir_addr = 0xb031
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    
    
    ===========================================Miner log===========================================
    1970-01-01 00:00:09 Miner compile time: Sat May 15 21:17:18 CST 2021 type: Antminer S19j Pro
    1970-01-01 00:00:10 This is fix-freq version
    1970-01-01 00:00:10 Miner compile time: Sat May 15 21:17:18 CST 2021 type: Antminer S19j Pro
    1970-01-01 00:00:10 commit åversion: 46c2188 2021-05-15 21:14:17, build by: jenkins 2021-05-15 21:17:17
    1970-01-01 00:00:10 opt_multi_version     = 1
    1970-01-01 00:00:10 opt_bitmain_ab        = 1
    1970-01-01 00:00:10 mid_auto_gen          = 0
    1970-01-01 00:00:10 opt_bitmain_work_mode = 0
    1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
    1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
    1970-01-01 00:00:10 Note: front fan is power on!
    1970-01-01 00:00:10 Note: rear fan is power on!
    1970-01-01 00:00:10 start the http log.
    1970-01-01 00:00:10 httpListenThread start ret=0
    1970-01-01 00:00:10 start listen on 6060 ...
    1970-01-01 00:00:10 load machine BHB42601 conf
    1970-01-01 00:00:10 machine : BHB42601 
    1970-01-01 00:00:10 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
    2021-08-13 02:39:22 miner ID : 803295064e10481c
    2021-08-13 02:39:22 FPGA Version = 0xB031
    2021-08-13 02:39:22 HASH_ON_PLUG V9 = 0x7
    2021-08-13 02:39:22 ==========================capability start==========================
    2021-08-13 02:39:22 board num = 3
    2021-08-13 02:39:22 board id = 0, chain num = 1
    2021-08-13 02:39:22 	chain id = 0
    2021-08-13 02:39:22 board id = 1, chain num = 1
    2021-08-13 02:39:22 	chain id = 1
    2021-08-13 02:39:22 board id = 2, chain num = 1
    2021-08-13 02:39:22 	chain id = 2
    2021-08-13 02:39:22 ==========================capability end============================
    2021-08-13 02:39:22 chain num = 3
    2021-08-13 02:39:23 load chain 0 eeprom data
    2021-08-13 02:39:23 board_info_version = 4
    2021-08-13 02:39:23 algorithm_and_key_version = 0x11
    2021-08-13 02:39:23 board_sn = YDFTYN3BAJEAG0EXK
    2021-08-13 02:39:23 chip_die = ED
    2021-08-13 02:39:23 chip_marking = S1C021AU09
    2021-08-13 02:39:23 chip_bin = 5
    2021-08-13 02:39:23 ft_version = F1V04B2C1
    2021-08-13 02:39:23 pcb_version = 0x100
    2021-08-13 02:39:23 bom_version = 0x10
    2021-08-13 02:39:23 asic_sensor_type = 0x0
    2021-08-13 02:39:23 asic_sensor_addr[0] = 0x0
    2021-08-13 02:39:23 asic_sensor_addr[1] = 0x0
    2021-08-13 02:39:23 asic_sensor_addr[2] = 0x0
    2021-08-13 02:39:23 asic_sensor_addr[3] = 0x0
    2021-08-13 02:39:23 pic_sensor_type = 0x81
    2021-08-13 02:39:23 pic_sensor_addr = 0x1
    2021-08-13 02:39:23 chip_tech = AA
    2021-08-13 02:39:23 board_name = BHB42601
    2021-08-13 02:39:23 factory_job = YDFT20210517002-ZB
    2021-08-13 02:39:23 board_info_crc = 0x16
    2021-08-13 02:39:23 voltage = 1320
    2021-08-13 02:39:23 frequency = 505
    2021-08-13 02:39:23 nonce_rate = 9977
    2021-08-13 02:39:23 pcb_temp_in = 35
    2021-08-13 02:39:23 pcb_temp_out = 38
    2021-08-13 02:39:23 test_version = 1
    2021-08-13 02:39:23 test_standard = 0
    2021-08-13 02:39:23 param_info_crc = 0xe
    2021-08-13 02:39:23 pt1_result = 1
    2021-08-13 02:39:23 pt1_count = 1
    2021-08-13 02:39:23 pt2_result = 1
    2021-08-13 02:39:23 pt2_count = 1
    2021-08-13 02:39:25 load chain 1 eeprom data
    2021-08-13 02:39:25 board_info_version = 4
    2021-08-13 02:39:25 algorithm_and_key_version = 0x11
    2021-08-13 02:39:25 board_sn = YDFTYN3BAJEAG0EX8
    2021-08-13 02:39:25 chip_die = ED
    2021-08-13 02:39:25 chip_marking = S1CT21AY34
    2021-08-13 02:39:25 chip_bin = 5
    2021-08-13 02:39:25 ft_version = F1V04B2C1
    2021-08-13 02:39:25 pcb_version = 0x100
    2021-08-13 02:39:25 bom_version = 0x10
    2021-08-13 02:39:25 asic_sensor_type = 0x0
    2021-08-13 02:39:25 asic_sensor_addr[0] = 0x0
    2021-08-13 02:39:25 asic_sensor_addr[1] = 0x0
    2021-08-13 02:39:25 asic_sensor_addr[2] = 0x0
    2021-08-13 02:39:25 asic_sensor_addr[3] = 0x0
    2021-08-13 02:39:25 pic_sensor_type = 0x81
    2021-08-13 02:39:25 pic_sensor_addr = 0x1
    2021-08-13 02:39:25 chip_tech = AA
    2021-08-13 02:39:25 board_name = BHB42601
    2021-08-13 02:39:25 factory_job = YDFT20210517002-ZB
    2021-08-13 02:39:25 board_info_crc = 0xe
    2021-08-13 02:39:25 voltage = 1320
    2021-08-13 02:39:25 frequency = 505
    2021-08-13 02:39:25 nonce_rate = 9967
    2021-08-13 02:39:25 pcb_temp_in = 33
    2021-08-13 02:39:25 pcb_temp_out = 34
    2021-08-13 02:39:25 test_version = 1
    2021-08-13 02:39:25 test_standard = 0
    2021-08-13 02:39:25 param_info_crc = 0xd
    2021-08-13 02:39:25 pt1_result = 1
    2021-08-13 02:39:25 pt1_count = 1
    2021-08-13 02:39:25 pt2_result = 1
    2021-08-13 02:39:25 pt2_count = 1
    2021-08-13 02:39:27 load chain 2 eeprom data
    2021-08-13 02:39:27 board_info_version = 4
    2021-08-13 02:39:27 algorithm_and_key_version = 0x11
    2021-08-13 02:39:27 board_sn = YDFTYN3BAJEAG0EWL
    2021-08-13 02:39:27 chip_die = ED
    2021-08-13 02:39:27 chip_marking = S1CT21AY34
    2021-08-13 02:39:27 chip_bin = 5
    2021-08-13 02:39:27 ft_version = F1V04B2C1
    2021-08-13 02:39:27 pcb_version = 0x100
    2021-08-13 02:39:27 bom_version = 0x10
    2021-08-13 02:39:27 asic_sensor_type = 0x0
    2021-08-13 02:39:27 asic_sensor_addr[0] = 0x0
    2021-08-13 02:39:27 asic_sensor_addr[1] = 0x0
    2021-08-13 02:39:27 asic_sensor_addr[2] = 0x0
    2021-08-13 02:39:27 asic_sensor_addr[3] = 0x0
    2021-08-13 02:39:27 pic_sensor_type = 0x81
    2021-08-13 02:39:27 pic_sensor_addr = 0x1
    2021-08-13 02:39:27 chip_tech = AA
    2021-08-13 02:39:27 board_name = BHB42601
    2021-08-13 02:39:27 factory_job = YDFT20210517002-ZB
    2021-08-13 02:39:27 board_info_crc = 0xd
    2021-08-13 02:39:27 voltage = 1320
    2021-08-13 02:39:27 frequency = 505
    2021-08-13 02:39:27 nonce_rate = 9982
    2021-08-13 02:39:27 pcb_temp_in = 33
    2021-08-13 02:39:27 pcb_temp_out = 34
    2021-08-13 02:39:27 test_version = 1
    2021-08-13 02:39:27 test_standard = 0
    2021-08-13 02:39:27 param_info_crc = 0x9
    2021-08-13 02:39:27 pt1_result = 1
    2021-08-13 02:39:27 pt1_count = 1
    2021-08-13 02:39:27 pt2_result = 1
    2021-08-13 02:39:27 pt2_count = 1
    2021-08-13 02:39:27 fan_eft : 0  fan_pwm : 100
    2021-08-13 02:39:27 create thread get_nonce_and_register_thread
    2021-08-13 02:39:27 fixed working voltage = -1
    2021-08-13 02:39:27 Chain [0] PCB Version: 0x0100
    2021-08-13 02:39:27 Chain [0] BOM Version: 0x0010
    2021-08-13 02:39:27 Chain [1] PCB Version: 0x0100
    2021-08-13 02:39:27 Chain [1] BOM Version: 0x0010
    2021-08-13 02:39:27 Chain [2] PCB Version: 0x0100
    2021-08-13 02:39:27 Chain [2] BOM Version: 0x0010
    2021-08-13 02:39:31 Fan check passed.
    2021-08-13 02:39:32 chain[0] PIC jump to app
    2021-08-13 02:39:33 Check chain[0] PIC fw version=0x89
    2021-08-13 02:39:34 chain[1] PIC jump to app
    2021-08-13 02:39:36 Check chain[1] PIC fw version=0x89
    2021-08-13 02:39:37 chain[2] PIC jump to app
    2021-08-13 02:39:39 Check chain[2] PIC fw version=0x89
    2021-08-13 02:39:39 create thread pic_heart_beat_thread
    2021-08-13 02:39:39 max sensor num = 4
    2021-08-13 02:39:39 temperature_monitor_thread start...
    2021-08-13 02:39:43 power type version: 0x0071
    2021-08-13 02:39:43 Enter sleep to make sure power release finish.
    2021-08-13 02:40:14 Slept 30 seconds, diff = 1.
    2021-08-13 02:40:15 set_voltage_by_steps to 1500.
    2021-08-13 02:40:20 start up min temp by 75a = 27
    2021-08-13 02:40:21 set UART baud to 115200
    2021-08-13 02:40:23 chain avg vol rise to 15.26
    2021-08-13 02:40:31 Chain[0]: find 126 asic, times 0
    2021-08-13 02:40:41 Chain[1]: find 126 asic, times 0
    2021-08-13 02:40:51 Chain[2]: find 126 asic, times 0
    2021-08-13 02:40:56 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
    2021-08-13 02:41:00 min freq in eeprom = 0
    2021-08-13 02:41:00 failed to load freq in eeprom, using default
    2021-08-13 02:41:00 fixed frequency is 200
    2021-08-13 02:41:02 chain avg vol drop to 5.53
    2021-08-13 02:41:03 Bring up temperature is 28
    2021-08-13 02:41:03 set UART baud to 12000000
    2021-08-13 02:41:04 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
    2021-08-13 02:41:04 start do_core_reset
    2021-08-13 02:41:15 chain avg vol drop to 0.87
    2021-08-13 02:41:25 end do_core_reset
    2021-08-13 02:41:25 STATUS_INITED: soc init done!
    2021-08-13 02:41:25 create thread check_miner_status_thread
    2021-08-13 02:41:25 create thread check_system_work_thread
    2021-08-13 02:41:28 start to init...
    2021-08-13 02:41:28 set_voltage_by_steps to 1450.
    2021-08-13 02:41:30 fixed step freq_start = 50, freq_end = 200, freq_step = 6.25
    2021-08-13 02:41:30 chain = 0 set freq to 56.25
    2021-08-13 02:41:30 chain = 1 set freq to 56.25
    2021-08-13 02:41:30 chain = 2 set freq to 56.25
    2021-08-13 02:41:30 chain = 0 set freq to 62.50
    2021-08-13 02:41:30 chain = 1 set freq to 62.50
    2021-08-13 02:41:30 chain = 2 set freq to 62.50
    2021-08-13 02:41:30 chain = 0 set freq to 68.75
    2021-08-13 02:41:30 chain = 1 set freq to 68.75
    2021-08-13 02:41:30 chain = 2 set freq to 68.75
    2021-08-13 02:41:30 chain = 0 set freq to 75.00
    2021-08-13 02:41:30 chain = 1 set freq to 75.00
    2021-08-13 02:41:30 chain = 2 set freq to 75.00
    2021-08-13 02:41:30 chain = 0 set freq to 81.25
    2021-08-13 02:41:30 chain = 1 set freq to 81.25
    2021-08-13 02:41:30 chain = 2 set freq to 81.25
    2021-08-13 02:41:30 chain = 0 set freq to 87.50
    2021-08-13 02:41:30 chain = 1 set freq to 87.50
    2021-08-13 02:41:30 chain = 2 set freq to 87.50
    2021-08-13 02:41:31 chain = 0 set freq to 93.75
    2021-08-13 02:41:31 chain = 1 set freq to 93.75
    2021-08-13 02:41:31 chain = 2 set freq to 93.75
    2021-08-13 02:41:31 chain = 0 set freq to 100.00
    2021-08-13 02:41:31 chain = 1 set freq to 100.00
    2021-08-13 02:41:31 chain = 2 set freq to 100.00
    2021-08-13 02:41:31 chain = 0 set freq to 106.25
    2021-08-13 02:41:31 chain = 1 set freq to 106.25
    2021-08-13 02:41:31 chain = 2 set freq to 106.25
    2021-08-13 02:41:31 chain = 0 set freq to 112.50
    2021-08-13 02:41:31 chain = 1 set freq to 112.50
    2021-08-13 02:41:31 chain = 2 set freq to 112.50
    2021-08-13 02:41:31 chain = 0 set freq to 118.75
    2021-08-13 02:41:31 chain = 1 set freq to 118.75
    2021-08-13 02:41:31 chain = 2 set freq to 118.75
    2021-08-13 02:41:31 chain = 0 set freq to 125.00
    2021-08-13 02:41:31 chain = 1 set freq to 125.00
    2021-08-13 02:41:31 chain = 2 set freq to 125.00
    2021-08-13 02:41:31 chain = 0 set freq to 131.25
    2021-08-13 02:41:31 chain = 1 set freq to 131.25
    2021-08-13 02:41:31 chain = 2 set freq to 131.25
    2021-08-13 02:41:31 chain = 0 set freq to 137.50
    2021-08-13 02:41:31 chain = 1 set freq to 137.50
    2021-08-13 02:41:31 chain = 2 set freq to 137.50
    2021-08-13 02:41:31 chain = 0 set freq to 143.75
    2021-08-13 02:41:31 chain = 1 set freq to 143.75
    2021-08-13 02:41:31 chain = 2 set freq to 143.75
    2021-08-13 02:41:31 chain = 0 set freq to 150.00
    2021-08-13 02:41:31 chain = 1 set freq to 150.00
    2021-08-13 02:41:31 chain = 2 set freq to 150.00
    2021-08-13 02:41:32 chain = 0 set freq to 156.25
    2021-08-13 02:41:32 chain = 1 set freq to 156.25
    2021-08-13 02:41:32 chain = 2 set freq to 156.25
    2021-08-13 02:41:32 chain = 0 set freq to 162.50
    2021-08-13 02:41:32 chain = 1 set freq to 162.50
    2021-08-13 02:41:32 chain = 2 set freq to 162.50
    2021-08-13 02:41:32 chain = 0 set freq to 168.75
    2021-08-13 02:41:32 chain = 1 set freq to 168.75
    2021-08-13 02:41:32 chain = 2 set freq to 168.75
    2021-08-13 02:41:32 chain = 0 set freq to 175.00
    2021-08-13 02:41:32 chain = 1 set freq to 175.00
    2021-08-13 02:41:32 chain = 2 set freq to 175.00
    2021-08-13 02:41:32 chain = 0 set freq to 181.25
    2021-08-13 02:41:32 chain = 1 set freq to 181.25
    2021-08-13 02:41:32 chain = 2 set freq to 181.25
    2021-08-13 02:41:32 chain = 0 set freq to 187.50
    2021-08-13 02:41:32 chain = 1 set freq to 187.50
    2021-08-13 02:41:32 chain = 2 set freq to 187.50
    2021-08-13 02:41:32 chain = 0 set freq to 193.75
    2021-08-13 02:41:32 chain = 1 set freq to 193.75
    2021-08-13 02:41:32 chain = 2 set freq to 193.75
    2021-08-13 02:41:32 chain = 0 set freq to 200.00
    2021-08-13 02:41:32 chain = 1 set freq to 200.00
    2021-08-13 02:41:32 chain = 2 set freq to 200.00
    2021-08-13 02:41:33 Init done!
    2021-08-13 02:41:33 STATUS_OKAY
    2021-08-13 02:41:33 start the cached job
    2021-08-13 02:41:33 Version num 8
    2021-08-13 02:41:33 Mask num 0xe000
    2021-08-13 02:41:33 freq = 200, percent = 90, hcn = 13107, timeout = 943
    2021-08-13 02:41:33 set_start_time_point total_tv_start_sys=149 total_tv_end_sys=150
    2021-08-13 03:11:26 avg rate is lower than ideal rate, 0.00 in 32 mins
    2021-08-13 03:11:26 30m avg rate is 0.00 in 32 mins
    2021-08-13 03:41:27 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 03:41:27 30m avg rate is 0.00 in 30 mins
    2021-08-13 04:11:29 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 04:11:29 30m avg rate is 0.00 in 30 mins
    2021-08-13 04:41:31 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 04:41:31 30m avg rate is 0.00 in 30 mins
    2021-08-13 05:11:32 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 05:11:32 30m avg rate is 0.00 in 30 mins
    2021-08-13 05:41:34 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 05:41:34 30m avg rate is 0.00 in 30 mins
    2021-08-13 06:11:36 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 06:11:36 30m avg rate is 0.00 in 30 mins
    2021-08-13 06:41:38 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 06:41:38 30m avg rate is 0.00 in 30 mins
    2021-08-13 07:11:39 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 07:11:39 30m avg rate is 0.00 in 30 mins
    2021-08-13 07:41:41 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 07:41:41 30m avg rate is 0.00 in 30 mins
    2021-08-13 08:11:43 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 08:11:43 30m avg rate is 0.00 in 30 mins
    2021-08-13 08:41:44 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 08:41:44 30m avg rate is 0.00 in 30 mins
    2021-08-13 09:11:46 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 09:11:46 30m avg rate is 0.00 in 30 mins
    2021-08-13 09:41:48 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 09:41:48 30m avg rate is 0.00 in 30 mins
    2021-08-13 10:11:50 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 10:11:50 30m avg rate is 0.00 in 30 mins
    2021-08-13 10:41:51 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 10:41:51 30m avg rate is 0.00 in 30 mins
    2021-08-13 11:11:53 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 11:11:53 30m avg rate is 0.00 in 30 mins
    2021-08-13 11:41:55 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 11:41:55 30m avg rate is 0.00 in 30 mins
    2021-08-13 12:11:57 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 12:11:57 30m avg rate is 0.00 in 30 mins
    2021-08-13 12:41:58 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 12:41:58 30m avg rate is 0.00 in 30 mins
    2021-08-13 13:12:00 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 13:12:00 30m avg rate is 0.00 in 30 mins
    2021-08-13 13:42:02 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-13 13:42:02 30m avg rate is 0.00 in 30 mins
    0
    评论操作 固定链接

    I am unable to post the historical log here because it is too long but I can potentially email it to you if that works?

    Thanks again for your help!

    0
    评论操作 固定链接

    Dear Kadeem A

    There is no hashrate could you try to reboot it again to double check ?

    0
    评论操作 固定链接

    I have rebooted and waited hours many times over now, as the miner had been down for several days now.

    The miner Stopped working the second I did the firmware update from the service site it has not worked since no matter what I do. I would really like to try the SD card file flash like another poster that got theirs back and running

    0
    评论操作 固定链接

    I will take a picture of the control board in the meantime but I’m pretty positive that it’s a firmware update problem it happened immediately after 

    can you send me the sd card software files so i can at least try flashing it back to original software/firmware?

    0
    评论操作 固定链接

    picture of baseboard so can determine which sd card file I need:

     

    0
    评论操作 固定链接

    Dear

    Okay I know it , could you advise your email address, we will send the SD card to you .

    0
    评论操作 固定链接

    received the file! 

     

    Unfortunately the error persist. I have sent additional logs to Lisa (bitmain email support). As you can see in the log post below, the miner will not load eeprom frequency, it keeps defaulting to low value of 200. In my earlier post (when it was still working) it continues to go through frequency band

    2021-08-19 19:12:09 min freq in eeprom = 0
    2021-08-19 19:12:09 failed to load freq in eeprom, using default
    2021-08-19 19:12:09 fixed frequency is 200

     

    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
      Normal zone: 480 pages used for memmap
      Normal zone: 0 pages reserved
      Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
    pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1 
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 209676K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19700K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
        vector  : 0xffff0000 - 0xffff1000   (   4 kB)
        fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
        vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
        lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
        pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
        modules : 0xbf000000 - 0xbfe00000   (  14 MB)
          .text : 0xc0008000 - 0xc090e410   (9242 kB)
          .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
          .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
           .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
    Preemptible hierarchical RCU implementation.
    	Build-time adjustment of leaf fanout to 32.
    	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 6628K (cd480000 - cdaf9000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: disable subpage write
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: NAND_ECC_HW
    nand: NAND_ECC_HW_SYNDROME
    mtd->writesize = 2048
    ecc->strength = 1
    ecc->size = 2048
    mtd->writesize = 2048
    chip->ecc_strength_ds = 4
    chip->ecc_step_ds = 512
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    nand_read_bbt: bad block at 0x000002420000
    nand_read_bbt: bad block at 0x000002440000
    nand_read_bbt: bad block at 0x000002460000
    8 ofpart partitions found on MTD device pl35x-nand
    Creating 8 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000005200000 : "sig"
    0x000005200000-0x000006000000 : "reserve1"
    0x000006000000-0x000007000000 : "upgrade-ramfs"
    0x000007000000-0x00000a800000 : "upgrade-file"
    0x00000a800000-0x000010000000 : "reserve2"
    nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
    ip_tables: (C) 2000-2006 Netfilter Core Team
    NET: Registered protocol family 10
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
      No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
    devpts: called with bogus options
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 8/3, WL threshold: 4096, image sequence number: 1285939732
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
    ubi0: background thread "ubi_bgt0d" started, PID 729
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
    UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 755691A8-ABD6-4BFE-A950-439F3B8D2085, small LPT model
    ubi2: attaching mtd4
    ubi2: scanning is finished
    ubi2: attached mtd4 (name "reserve1", size 14 MiB)
    ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
    ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 389151005
    ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
    ubi2: background thread "ubi_bgt2d" started, PID 740
    UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
    UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
    UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
    UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
    UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID A96E3AB3-A4E1-47CE-A001-AE4E57E42F95, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    random: avahi-daemon urandom read with 2 bits of entropy available
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfbc8000
    *base_vir_addr = 0xb031
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    
    
    ===========================================Miner log===========================================
    1970-01-01 00:00:09 Miner compile time: Sat May 15 21:17:18 CST 2021 type: Antminer S19j Pro
    1970-01-01 00:00:10 This is fix-freq version
    1970-01-01 00:00:10 Miner compile time: Sat May 15 21:17:18 CST 2021 type: Antminer S19j Pro
    1970-01-01 00:00:10 commit åversion: 46c2188 2021-05-15 21:14:17, build by: jenkins 2021-05-15 21:17:17
    1970-01-01 00:00:10 opt_multi_version     = 1
    1970-01-01 00:00:10 opt_bitmain_ab        = 1
    1970-01-01 00:00:10 mid_auto_gen          = 0
    1970-01-01 00:00:10 opt_bitmain_work_mode = 0
    1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5700000
    1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
    1970-01-01 00:00:10 Note: front fan is power on!
    1970-01-01 00:00:10 Note: rear fan is power on!
    1970-01-01 00:00:10 start the http log.
    1970-01-01 00:00:10 httpListenThread start ret=0
    1970-01-01 00:00:10 start listen on 6060 ...
    1970-01-01 00:00:10 load machine BHB42601 conf
    1970-01-01 00:00:10 machine : BHB42601 
    1970-01-01 00:00:10 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
    1970-01-01 00:00:16 miner ID : 803295064e10481c
    1970-01-01 00:00:16 FPGA Version = 0xB031
    1970-01-01 00:00:16 HASH_ON_PLUG V9 = 0x7
    1970-01-01 00:00:16 ==========================capability start==========================
    1970-01-01 00:00:16 board num = 3
    1970-01-01 00:00:16 board id = 0, chain num = 1
    1970-01-01 00:00:16 	chain id = 0
    1970-01-01 00:00:16 board id = 1, chain num = 1
    1970-01-01 00:00:16 	chain id = 1
    1970-01-01 00:00:16 board id = 2, chain num = 1
    1970-01-01 00:00:16 	chain id = 2
    1970-01-01 00:00:16 ==========================capability end============================
    1970-01-01 00:00:16 chain num = 3
    1970-01-01 00:00:18 load chain 0 eeprom data
    1970-01-01 00:00:18 board_info_version = 4
    1970-01-01 00:00:18 algorithm_and_key_version = 0x11
    1970-01-01 00:00:18 board_sn = YDFTYN3BAJEAG0EXK
    1970-01-01 00:00:18 chip_die = ED
    1970-01-01 00:00:18 chip_marking = S1C021AU09
    1970-01-01 00:00:18 chip_bin = 5
    1970-01-01 00:00:18 ft_version = F1V04B2C1
    1970-01-01 00:00:18 pcb_version = 0x100
    1970-01-01 00:00:18 bom_version = 0x10
    1970-01-01 00:00:18 asic_sensor_type = 0x0
    1970-01-01 00:00:18 asic_sensor_addr[0] = 0x0
    1970-01-01 00:00:18 asic_sensor_addr[1] = 0x0
    1970-01-01 00:00:18 asic_sensor_addr[2] = 0x0
    1970-01-01 00:00:18 asic_sensor_addr[3] = 0x0
    1970-01-01 00:00:18 pic_sensor_type = 0x81
    1970-01-01 00:00:18 pic_sensor_addr = 0x1
    1970-01-01 00:00:18 chip_tech = AA
    1970-01-01 00:00:18 board_name = BHB42601
    1970-01-01 00:00:18 factory_job = YDFT20210517002-ZB
    1970-01-01 00:00:18 board_info_crc = 0x16
    1970-01-01 00:00:18 voltage = 1320
    1970-01-01 00:00:18 frequency = 505
    1970-01-01 00:00:18 nonce_rate = 9977
    1970-01-01 00:00:18 pcb_temp_in = 35
    1970-01-01 00:00:18 pcb_temp_out = 38
    1970-01-01 00:00:18 test_version = 1
    1970-01-01 00:00:18 test_standard = 0
    1970-01-01 00:00:18 param_info_crc = 0xe
    1970-01-01 00:00:18 pt1_result = 1
    1970-01-01 00:00:18 pt1_count = 1
    1970-01-01 00:00:18 pt2_result = 1
    1970-01-01 00:00:18 pt2_count = 1
    2021-08-19 19:10:34 load chain 1 eeprom data
    2021-08-19 19:10:34 board_info_version = 4
    2021-08-19 19:10:34 algorithm_and_key_version = 0x11
    2021-08-19 19:10:34 board_sn = YDFTYN3BAJEAG0EX8
    2021-08-19 19:10:34 chip_die = ED
    2021-08-19 19:10:34 chip_marking = S1CT21AY34
    2021-08-19 19:10:34 chip_bin = 5
    2021-08-19 19:10:34 ft_version = F1V04B2C1
    2021-08-19 19:10:34 pcb_version = 0x100
    2021-08-19 19:10:34 bom_version = 0x10
    2021-08-19 19:10:34 asic_sensor_type = 0x0
    2021-08-19 19:10:34 asic_sensor_addr[0] = 0x0
    2021-08-19 19:10:34 asic_sensor_addr[1] = 0x0
    2021-08-19 19:10:34 asic_sensor_addr[2] = 0x0
    2021-08-19 19:10:34 asic_sensor_addr[3] = 0x0
    2021-08-19 19:10:34 pic_sensor_type = 0x81
    2021-08-19 19:10:34 pic_sensor_addr = 0x1
    2021-08-19 19:10:34 chip_tech = AA
    2021-08-19 19:10:34 board_name = BHB42601
    2021-08-19 19:10:34 factory_job = YDFT20210517002-ZB
    2021-08-19 19:10:34 board_info_crc = 0xe
    2021-08-19 19:10:34 voltage = 1320
    2021-08-19 19:10:34 frequency = 505
    2021-08-19 19:10:34 nonce_rate = 9967
    2021-08-19 19:10:34 pcb_temp_in = 33
    2021-08-19 19:10:34 pcb_temp_out = 34
    2021-08-19 19:10:34 test_version = 1
    2021-08-19 19:10:34 test_standard = 0
    2021-08-19 19:10:34 param_info_crc = 0xd
    2021-08-19 19:10:34 pt1_result = 1
    2021-08-19 19:10:34 pt1_count = 1
    2021-08-19 19:10:34 pt2_result = 1
    2021-08-19 19:10:34 pt2_count = 1
    2021-08-19 19:10:36 load chain 2 eeprom data
    2021-08-19 19:10:36 board_info_version = 4
    2021-08-19 19:10:36 algorithm_and_key_version = 0x11
    2021-08-19 19:10:36 board_sn = YDFTYN3BAJEAG0EWL
    2021-08-19 19:10:36 chip_die = ED
    2021-08-19 19:10:36 chip_marking = S1CT21AY34
    2021-08-19 19:10:36 chip_bin = 5
    2021-08-19 19:10:36 ft_version = F1V04B2C1
    2021-08-19 19:10:36 pcb_version = 0x100
    2021-08-19 19:10:36 bom_version = 0x10
    2021-08-19 19:10:36 asic_sensor_type = 0x0
    2021-08-19 19:10:36 asic_sensor_addr[0] = 0x0
    2021-08-19 19:10:36 asic_sensor_addr[1] = 0x0
    2021-08-19 19:10:36 asic_sensor_addr[2] = 0x0
    2021-08-19 19:10:36 asic_sensor_addr[3] = 0x0
    2021-08-19 19:10:36 pic_sensor_type = 0x81
    2021-08-19 19:10:36 pic_sensor_addr = 0x1
    2021-08-19 19:10:36 chip_tech = AA
    2021-08-19 19:10:36 board_name = BHB42601
    2021-08-19 19:10:36 factory_job = YDFT20210517002-ZB
    2021-08-19 19:10:36 board_info_crc = 0xd
    2021-08-19 19:10:36 voltage = 1320
    2021-08-19 19:10:36 frequency = 505
    2021-08-19 19:10:36 nonce_rate = 9982
    2021-08-19 19:10:36 pcb_temp_in = 33
    2021-08-19 19:10:36 pcb_temp_out = 34
    2021-08-19 19:10:36 test_version = 1
    2021-08-19 19:10:36 test_standard = 0
    2021-08-19 19:10:36 param_info_crc = 0x9
    2021-08-19 19:10:36 pt1_result = 1
    2021-08-19 19:10:36 pt1_count = 1
    2021-08-19 19:10:36 pt2_result = 1
    2021-08-19 19:10:36 pt2_count = 1
    2021-08-19 19:10:36 fan_eft : 0  fan_pwm : 100
    2021-08-19 19:10:36 create thread get_nonce_and_register_thread
    2021-08-19 19:10:36 fixed working voltage = -1
    2021-08-19 19:10:36 Chain [0] PCB Version: 0x0100
    2021-08-19 19:10:36 Chain [0] BOM Version: 0x0010
    2021-08-19 19:10:36 Chain [1] PCB Version: 0x0100
    2021-08-19 19:10:36 Chain [1] BOM Version: 0x0010
    2021-08-19 19:10:36 Chain [2] PCB Version: 0x0100
    2021-08-19 19:10:36 Chain [2] BOM Version: 0x0010
    2021-08-19 19:10:40 Fan check passed.
    2021-08-19 19:10:41 chain[0] PIC jump to app
    2021-08-19 19:10:42 Check chain[0] PIC fw version=0x89
    2021-08-19 19:10:43 chain[1] PIC jump to app
    2021-08-19 19:10:45 Check chain[1] PIC fw version=0x89
    2021-08-19 19:10:46 chain[2] PIC jump to app
    2021-08-19 19:10:47 Check chain[2] PIC fw version=0x89
    2021-08-19 19:10:48 create thread pic_heart_beat_thread
    2021-08-19 19:10:48 max sensor num = 4
    2021-08-19 19:10:48 temperature_monitor_thread start...
    2021-08-19 19:10:52 power type version: 0x0071
    2021-08-19 19:10:52 Enter sleep to make sure power release finish.
    2021-08-19 19:11:23 Slept 30 seconds, diff = 1.
    2021-08-19 19:11:24 set_voltage_by_steps to 1500.
    2021-08-19 19:11:29 start up min temp by 75a = 27
    2021-08-19 19:11:29 set UART baud to 115200
    2021-08-19 19:11:32 chain avg vol rise to 15.27
    2021-08-19 19:11:39 Chain[0]: find 126 asic, times 0
    2021-08-19 19:11:49 Chain[1]: find 126 asic, times 0
    2021-08-19 19:11:59 Chain[2]: find 126 asic, times 0
    2021-08-19 19:12:04 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
    2021-08-19 19:12:09 min freq in eeprom = 0
    2021-08-19 19:12:09 failed to load freq in eeprom, using default
    2021-08-19 19:12:09 fixed frequency is 200
    2021-08-19 19:12:11 chain avg vol drop to 5.56
    2021-08-19 19:12:12 Bring up temperature is 27
    2021-08-19 19:12:12 set UART baud to 12000000
    2021-08-19 19:12:12 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
    2021-08-19 19:12:12 start do_core_reset
    2021-08-19 19:12:24 chain avg vol drop to 0.91
    2021-08-19 19:12:33 end do_core_reset
    2021-08-19 19:12:33 STATUS_INITED: soc init done!
    2021-08-19 19:12:33 create thread check_miner_status_thread
    2021-08-19 19:12:33 create thread check_system_work_thread
    2021-08-19 19:12:35 start to init...
    2021-08-19 19:12:35 set_voltage_by_steps to 1450.
    2021-08-19 19:12:38 fixed step freq_start = 50, freq_end = 200, freq_step = 6.25
    2021-08-19 19:12:38 chain = 0 set freq to 56.25
    2021-08-19 19:12:38 chain = 1 set freq to 56.25
    2021-08-19 19:12:38 chain = 2 set freq to 56.25
    2021-08-19 19:12:38 chain = 0 set freq to 62.50
    2021-08-19 19:12:38 chain = 1 set freq to 62.50
    2021-08-19 19:12:38 chain = 2 set freq to 62.50
    2021-08-19 19:12:38 chain = 0 set freq to 68.75
    2021-08-19 19:12:38 chain = 1 set freq to 68.75
    2021-08-19 19:12:38 chain = 2 set freq to 68.75
    2021-08-19 19:12:38 chain = 0 set freq to 75.00
    2021-08-19 19:12:38 chain = 1 set freq to 75.00
    2021-08-19 19:12:38 chain = 2 set freq to 75.00
    2021-08-19 19:12:38 chain = 0 set freq to 81.25
    2021-08-19 19:12:38 chain = 1 set freq to 81.25
    2021-08-19 19:12:38 chain = 2 set freq to 81.25
    2021-08-19 19:12:38 chain = 0 set freq to 87.50
    2021-08-19 19:12:38 chain = 1 set freq to 87.50
    2021-08-19 19:12:38 chain = 2 set freq to 87.50
    2021-08-19 19:12:38 chain = 0 set freq to 93.75
    2021-08-19 19:12:38 chain = 1 set freq to 93.75
    2021-08-19 19:12:38 chain = 2 set freq to 93.75
    2021-08-19 19:12:38 chain = 0 set freq to 100.00
    2021-08-19 19:12:38 chain = 1 set freq to 100.00
    2021-08-19 19:12:38 chain = 2 set freq to 100.00
    2021-08-19 19:12:38 chain = 0 set freq to 106.25
    2021-08-19 19:12:38 chain = 1 set freq to 106.25
    2021-08-19 19:12:38 chain = 2 set freq to 106.25
    2021-08-19 19:12:39 chain = 0 set freq to 112.50
    2021-08-19 19:12:39 chain = 1 set freq to 112.50
    2021-08-19 19:12:39 chain = 2 set freq to 112.50
    2021-08-19 19:12:39 chain = 0 set freq to 118.75
    2021-08-19 19:12:39 chain = 1 set freq to 118.75
    2021-08-19 19:12:39 chain = 2 set freq to 118.75
    2021-08-19 19:12:39 chain = 0 set freq to 125.00
    2021-08-19 19:12:39 chain = 1 set freq to 125.00
    2021-08-19 19:12:39 chain = 2 set freq to 125.00
    2021-08-19 19:12:39 chain = 0 set freq to 131.25
    2021-08-19 19:12:39 chain = 1 set freq to 131.25
    2021-08-19 19:12:39 chain = 2 set freq to 131.25
    2021-08-19 19:12:39 chain = 0 set freq to 137.50
    2021-08-19 19:12:39 chain = 1 set freq to 137.50
    2021-08-19 19:12:39 chain = 2 set freq to 137.50
    2021-08-19 19:12:39 chain = 0 set freq to 143.75
    2021-08-19 19:12:39 chain = 1 set freq to 143.75
    2021-08-19 19:12:39 chain = 2 set freq to 143.75
    2021-08-19 19:12:39 chain = 0 set freq to 150.00
    2021-08-19 19:12:39 chain = 1 set freq to 150.00
    2021-08-19 19:12:39 chain = 2 set freq to 150.00
    2021-08-19 19:12:39 chain = 0 set freq to 156.25
    2021-08-19 19:12:39 chain = 1 set freq to 156.25
    2021-08-19 19:12:39 chain = 2 set freq to 156.25
    2021-08-19 19:12:39 chain = 0 set freq to 162.50
    2021-08-19 19:12:39 chain = 1 set freq to 162.50
    2021-08-19 19:12:39 chain = 2 set freq to 162.50
    2021-08-19 19:12:39 chain = 0 set freq to 168.75
    2021-08-19 19:12:39 chain = 1 set freq to 168.75
    2021-08-19 19:12:39 chain = 2 set freq to 168.75
    2021-08-19 19:12:40 chain = 0 set freq to 175.00
    2021-08-19 19:12:40 chain = 1 set freq to 175.00
    2021-08-19 19:12:40 chain = 2 set freq to 175.00
    2021-08-19 19:12:40 chain = 0 set freq to 181.25
    2021-08-19 19:12:40 chain = 1 set freq to 181.25
    2021-08-19 19:12:40 chain = 2 set freq to 181.25
    2021-08-19 19:12:40 chain = 0 set freq to 187.50
    2021-08-19 19:12:40 chain = 1 set freq to 187.50
    2021-08-19 19:12:40 chain = 2 set freq to 187.50
    2021-08-19 19:12:40 chain = 0 set freq to 193.75
    2021-08-19 19:12:40 chain = 1 set freq to 193.75
    2021-08-19 19:12:40 chain = 2 set freq to 193.75
    2021-08-19 19:12:40 chain = 0 set freq to 200.00
    2021-08-19 19:12:40 chain = 1 set freq to 200.00
    2021-08-19 19:12:40 chain = 2 set freq to 200.00
    2021-08-19 19:12:41 Init done!
    2021-08-19 19:12:41 STATUS_OKAY
    2021-08-19 19:12:41 start the cached job
    2021-08-19 19:12:41 Version num 8
    2021-08-19 19:12:41 Mask num 0xe000
    2021-08-19 19:12:41 freq = 200, percent = 90, hcn = 13107, timeout = 943
    2021-08-19 19:12:41 set_start_time_point total_tv_start_sys=148 total_tv_end_sys=149
    2021-08-19 19:42:34 avg rate is lower than ideal rate, 0.00 in 32 mins
    2021-08-19 19:42:34 30m avg rate is 0.00 in 32 mins
    2021-08-19 20:12:36 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-19 20:12:36 30m avg rate is 0.00 in 30 mins
    2021-08-19 20:42:38 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-19 20:42:38 30m avg rate is 0.00 in 30 mins
    2021-08-19 21:12:39 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-19 21:12:39 30m avg rate is 0.00 in 30 mins
    2021-08-19 21:42:41 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-19 21:42:41 30m avg rate is 0.00 in 30 mins
    2021-08-19 22:12:43 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-19 22:12:43 30m avg rate is 0.00 in 30 mins
    2021-08-19 22:42:45 avg rate is lower than ideal rate, 0.00 in 30 mins
    2021-08-19 22:42:45 30m avg rate is 0.00 in 30 mins
    0
    评论操作 固定链接

    @niftyframes, do not get your hopes up regarding a response from Bitmain customer support. To this day I have yet to receive the firmware that came with my miner or helpful response from Bitmain support after two months of correspondence. I’ve only gotten the runaround from them, and recently no response at all. My S19J pro is currently on a shelf collecting dust because I cant get any help or firmware support from the manufacturer.

    P.S Still waiting

    0
    评论操作 固定链接

    Dear

    Could you reboot it to try ?

    -1
    评论操作 固定链接

请先登录再写评论。