S19J PRO 96t Abnormal Hash Rate

已回答

2021年08月13日 00:09

Hello All,

I'm having an issue with a new S19j Pro 96t that I received a few days ago. The Miner would mine for a few hours and then stop intermittently.

I decided to update the firmware using the firmware posted on the support page for the S19J Pro linked below

https://service.bitmain.com/support/download?product=Antminer%20S19j%20Pro

After updating the firmware and restarting the miner I keep getting the "abnormal chip state" message. Network status, fan speed and temperature all show fine. Below I've pasted a copy of my Historical log. A little further down in this post is a copy of my current log as well

Any help would be greatly appreciated

===========================================Miner log===========================================
1970-01-01 00:00:20 board_name = BHB42601
1970-01-01 00:00:20 factory_job = YDFT20210517002-ZB
1970-01-01 00:00:20 board_info_crc = 0xe
1970-01-01 00:00:20 voltage = 1320
1970-01-01 00:00:20 frequency = 505
1970-01-01 00:00:20 nonce_rate = 9967
1970-01-01 00:00:20 pcb_temp_in = 33
1970-01-01 00:00:20 pcb_temp_out = 34
1970-01-01 00:00:20 test_version = 1
1970-01-01 00:00:20 test_standard = 0
1970-01-01 00:00:20 param_info_crc = 0xd
1970-01-01 00:00:20 pt1_result = 1
1970-01-01 00:00:20 pt1_count = 1
1970-01-01 00:00:20 pt2_result = 1
1970-01-01 00:00:20 pt2_count = 1
2021-05-29 23:39:53 load chain 2 eeprom data
2021-05-29 23:39:53 board_info_version = 4
2021-05-29 23:39:53 algorithm_and_key_version = 0x11
2021-05-29 23:39:53 board_sn = YDFTYN3BAJEAG0EWL
2021-05-29 23:39:53 chip_die = ED
2021-05-29 23:39:53 chip_marking = S1CT21AY34
2021-05-29 23:39:53 chip_bin = 5
2021-05-29 23:39:53 ft_version = F1V04B2C1
2021-05-29 23:39:53 pcb_version = 0x100
2021-05-29 23:39:53 bom_version = 0x10
2021-05-29 23:39:53 asic_sensor_type = 0x0
2021-05-29 23:39:53 asic_sensor_addr[0] = 0x0
2021-05-29 23:39:53 asic_sensor_addr[1] = 0x0
2021-05-29 23:39:53 asic_sensor_addr[2] = 0x0
2021-05-29 23:39:53 asic_sensor_addr[3] = 0x0
2021-05-29 23:39:53 pic_sensor_type = 0x81
2021-05-29 23:39:53 pic_sensor_addr = 0x1
2021-05-29 23:39:53 chip_tech = AA
2021-05-29 23:39:53 board_name = BHB42601
2021-05-29 23:39:53 factory_job = YDFT20210517002-ZB
2021-05-29 23:39:53 board_info_crc = 0xd
2021-05-29 23:39:53 voltage = 1320
2021-05-29 23:39:53 frequency = 505
2021-05-29 23:39:53 nonce_rate = 9982
2021-05-29 23:39:53 pcb_temp_in = 33
2021-05-29 23:39:53 pcb_temp_out = 34
2021-05-29 23:39:53 test_version = 1
2021-05-29 23:39:53 test_standard = 0
2021-05-29 23:39:53 param_info_crc = 0x9
2021-05-29 23:39:53 pt1_result = 1
2021-05-29 23:39:53 pt1_count = 1
2021-05-29 23:39:53 pt2_result = 1
2021-05-29 23:39:53 pt2_count = 1
2021-05-29 23:39:53 fan_eft : 0 fan_pwm : 100
2021-05-29 23:39:53 create thread get_nonce_and_register_thread
2021-05-29 23:39:53 fixed working voltage = 1320
2021-05-29 23:39:53 Chain [0] PCB Version: 0x0100
2021-05-29 23:39:53 Chain [0] BOM Version: 0x0010
2021-05-29 23:39:53 Chain [1] PCB Version: 0x0100
2021-05-29 23:39:53 Chain [1] BOM Version: 0x0010
2021-05-29 23:39:53 Chain [2] PCB Version: 0x0100
2021-05-29 23:39:53 Chain [2] BOM Version: 0x0010
2021-05-29 23:39:57 Fan check passed.
2021-05-29 23:39:58 chain[0] PIC jump to app
2021-05-29 23:39:59 Check chain[0] PIC fw version=0x89
2021-05-29 23:40:00 chain[1] PIC jump to app
2021-05-29 23:40:02 Check chain[1] PIC fw version=0x89
2021-05-29 23:40:03 chain[2] PIC jump to app
2021-05-29 23:40:04 Check chain[2] PIC fw version=0x89
2021-05-29 23:40:05 create thread pic_heart_beat_thread
2021-05-29 23:40:05 max sensor num = 4
2021-05-29 23:40:05 temperature_monitor_thread start...
2021-05-29 23:40:09 power type version: 0x0071
2021-05-29 23:40:09 Enter sleep to make sure power release finish.
2021-05-29 23:41:08 Slept 58 seconds, diff = 5.
2021-05-29 23:41:09 set_voltage_by_steps to 1500.
2021-05-29 23:41:15 start up min temp by 75a = 32
2021-05-29 23:41:15 set UART baud to 115200
2021-05-29 23:41:16 chain avg vol rise to 15.25
2021-05-29 23:41:25 Chain[0]: find 126 asic, times 0
2021-05-29 23:41:35 Chain[1]: find 126 asic, times 0
2021-05-29 23:41:45 Chain[2]: find 126 asic, times 0
2021-05-29 23:41:50 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-05-29 23:41:55 min freq in eeprom = 505
2021-05-29 23:41:55 fixed frequency is 505
2021-05-29 23:41:55 Bring up temperature is 32
2021-05-29 23:41:55 set UART baud to 12000000
2021-05-29 23:41:55 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-05-29 23:41:55 start do_core_reset
2021-05-29 23:42:16 end do_core_reset
2021-05-29 23:42:16 STATUS_INITED: soc init done!
2021-05-29 23:42:16 create thread check_miner_status_thread
2021-05-29 23:42:16 create thread check_system_work_thread
1970-01-01 00:00:09 Miner compile time: Fri May 28 17:43:03 CST 2021 type: Antminer S19j Pro
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Fri May 28 17:43:03 CST 2021 type: Antminer S19j Pro
1970-01-01 00:00:10 commit version: caca14d 2021-05-28 14:17:34, build by: jenkins 2021-05-28 17:43:02
1970-01-01 00:00:10 opt_multi_version = 1
1970-01-01 00:00:10 opt_bitmain_ab = 1
1970-01-01 00:00:10 mid_auto_gen = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5900000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine BHB42601 conf
1970-01-01 00:00:10 machine : BHB42601
1970-01-01 00:00:10 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
1970-01-01 00:00:16 miner ID : 803295064e10481c
1970-01-01 00:00:16 FPGA Version = 0xB031
1970-01-01 00:00:16 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:16 ==========================capability start==========================
1970-01-01 00:00:16 board num = 3
1970-01-01 00:00:16 board id = 0, chain num = 1
1970-01-01 00:00:16 chain id = 0
1970-01-01 00:00:16 board id = 1, chain num = 1
1970-01-01 00:00:16 chain id = 1
1970-01-01 00:00:16 board id = 2, chain num = 1
1970-01-01 00:00:16 chain id = 2
1970-01-01 00:00:16 ==========================capability end============================
1970-01-01 00:00:16 chain num = 3
1970-01-01 00:00:18 load chain 0 eeprom data
1970-01-01 00:00:18 board_info_version = 4
1970-01-01 00:00:18 algorithm_and_key_version = 0x11
1970-01-01 00:00:18 board_sn = YDFTYN3BAJEAG0EXK
1970-01-01 00:00:18 chip_die = ED
1970-01-01 00:00:18 chip_marking = S1C021AU09
1970-01-01 00:00:18 chip_bin = 5
1970-01-01 00:00:18 ft_version = F1V04B2C1
1970-01-01 00:00:18 pcb_version = 0x100
1970-01-01 00:00:18 bom_version = 0x10
1970-01-01 00:00:18 asic_sensor_type = 0x0
1970-01-01 00:00:18 asic_sensor_addr[0] = 0x0
1970-01-01 00:00:18 asic_sensor_addr[1] = 0x0
1970-01-01 00:00:18 asic_sensor_addr[2] = 0x0
1970-01-01 00:00:18 asic_sensor_addr[3] = 0x0
1970-01-01 00:00:18 pic_sensor_type = 0x81
1970-01-01 00:00:18 pic_sensor_addr = 0x1
1970-01-01 00:00:18 chip_tech = AA
1970-01-01 00:00:18 board_name = BHB42601
1970-01-01 00:00:18 factory_job = YDFT20210517002-ZB
1970-01-01 00:00:18 board_info_crc = 0x16
1970-01-01 00:00:18 voltage = 1320
1970-01-01 00:00:18 frequency = 505
1970-01-01 00:00:18 nonce_rate = 9977
1970-01-01 00:00:18 pcb_temp_in = 35
1970-01-01 00:00:18 pcb_temp_out = 38
1970-01-01 00:00:18 test_version = 1
1970-01-01 00:00:18 test_standard = 0
1970-01-01 00:00:18 param_info_crc = 0xe
1970-01-01 00:00:18 pt1_result = 1
1970-01-01 00:00:18 pt1_count = 1
1970-01-01 00:00:18 pt2_result = 1
1970-01-01 00:00:18 pt2_count = 1
1970-01-01 00:00:20 load chain 1 eeprom data
1970-01-01 00:00:20 board_info_version = 4
1970-01-01 00:00:20 algorithm_and_key_version = 0x11
1970-01-01 00:00:20 board_sn = YDFTYN3BAJEAG0EX8
1970-01-01 00:00:20 chip_die = ED
1970-01-01 00:00:20 chip_marking = S1CT21AY34
1970-01-01 00:00:20 chip_bin = 5
1970-01-01 00:00:20 ft_version = F1V04B2C1
1970-01-01 00:00:20 pcb_version = 0x100
1970-01-01 00:00:20 bom_version = 0x10
1970-01-01 00:00:20 asic_sensor_type = 0x0
1970-01-01 00:00:20 asic_sensor_addr[0] = 0x0
1970-01-01 00:00:20 asic_sensor_addr[1] = 0x0
1970-01-01 00:00:20 asic_sensor_addr[2] = 0x0
1970-01-01 00:00:20 asic_sensor_addr[3] = 0x0
1970-01-01 00:00:20 pic_sensor_type = 0x81
1970-01-01 00:00:20 pic_sensor_addr = 0x1
1970-01-01 00:00:20 chip_tech = AA
1970-01-01 00:00:20 board_name = BHB42601
1970-01-01 00:00:20 factory_job = YDFT20210517002-ZB
1970-01-01 00:00:20 board_info_crc = 0xe
1970-01-01 00:00:20 voltage = 1320
1970-01-01 00:00:20 frequency = 505
1970-01-01 00:00:20 nonce_rate = 9967
1970-01-01 00:00:20 pcb_temp_in = 33
1970-01-01 00:00:20 pcb_temp_out = 34
1970-01-01 00:00:20 test_version = 1
1970-01-01 00:00:20 test_standard = 0
1970-01-01 00:00:20 param_info_crc = 0xd
1970-01-01 00:00:20 pt1_result = 1
1970-01-01 00:00:20 pt1_count = 1
1970-01-01 00:00:20 pt2_result = 1
1970-01-01 00:00:20 pt2_count = 1
2021-08-11 00:33:58 load chain 2 eeprom data
2021-08-11 00:33:58 board_info_version = 4
2021-08-11 00:33:58 algorithm_and_key_version = 0x11
2021-08-11 00:33:58 board_sn = YDFTYN3BAJEAG0EWL
2021-08-11 00:33:58 chip_die = ED
2021-08-11 00:33:58 chip_marking = S1CT21AY34
2021-08-11 00:33:58 chip_bin = 5
2021-08-11 00:33:58 ft_version = F1V04B2C1
2021-08-11 00:33:58 pcb_version = 0x100
2021-08-11 00:33:58 bom_version = 0x10
2021-08-11 00:33:58 asic_sensor_type = 0x0
2021-08-11 00:33:58 asic_sensor_addr[0] = 0x0
2021-08-11 00:33:58 asic_sensor_addr[1] = 0x0
2021-08-11 00:33:58 asic_sensor_addr[2] = 0x0
2021-08-11 00:33:58 asic_sensor_addr[3] = 0x0
2021-08-11 00:33:58 pic_sensor_type = 0x81
2021-08-11 00:33:58 pic_sensor_addr = 0x1
2021-08-11 00:33:58 chip_tech = AA
2021-08-11 00:33:58 board_name = BHB42601
2021-08-11 00:33:58 factory_job = YDFT20210517002-ZB
2021-08-11 00:33:58 board_info_crc = 0xd
2021-08-11 00:33:58 voltage = 1320
2021-08-11 00:33:58 frequency = 505
2021-08-11 00:33:58 nonce_rate = 9982
2021-08-11 00:33:58 pcb_temp_in = 33
2021-08-11 00:33:58 pcb_temp_out = 34
2021-08-11 00:33:58 test_version = 1
2021-08-11 00:33:58 test_standard = 0
2021-08-11 00:33:58 param_info_crc = 0x9
2021-08-11 00:33:58 pt1_result = 1
2021-08-11 00:33:58 pt1_count = 1
2021-08-11 00:33:58 pt2_result = 1
2021-08-11 00:33:58 pt2_count = 1
2021-08-11 00:33:58 fan_eft : 0 fan_pwm : 100
2021-08-11 00:33:58 create thread get_nonce_and_register_thread
2021-08-11 00:33:58 fixed working voltage = 1320
2021-08-11 00:33:58 Chain [0] PCB Version: 0x0100
2021-08-11 00:33:58 Chain [0] BOM Version: 0x0010
2021-08-11 00:33:58 Chain [1] PCB Version: 0x0100
2021-08-11 00:33:58 Chain [1] BOM Version: 0x0010
2021-08-11 00:33:58 Chain [2] PCB Version: 0x0100
2021-08-11 00:33:58 Chain [2] BOM Version: 0x0010
2021-08-11 00:34:02 Fan check passed.
2021-08-11 00:34:03 chain[0] PIC jump to app
2021-08-11 00:34:05 Check chain[0] PIC fw version=0x89
2021-08-11 00:34:06 chain[1] PIC jump to app
2021-08-11 00:34:07 Check chain[1] PIC fw version=0x89
2021-08-11 00:34:08 chain[2] PIC jump to app
2021-08-11 00:34:10 Check chain[2] PIC fw version=0x89
2021-08-11 00:34:10 create thread pic_heart_beat_thread
2021-08-11 00:34:10 max sensor num = 4
2021-08-11 00:34:10 temperature_monitor_thread start...
2021-08-11 00:34:14 power type version: 0x0071
2021-08-11 00:34:14 Enter sleep to make sure power release finish.
2021-08-11 00:34:45 Slept 30 seconds, diff = 1.
2021-08-11 00:34:47 set_voltage_by_steps to 1500.
2021-08-11 00:34:52 start up min temp by 75a = 26
2021-08-11 00:34:52 set UART baud to 115200
2021-08-11 00:34:55 chain avg vol rise to 15.27
2021-08-11 00:35:02 Chain[0]: find 126 asic, times 0
2021-08-11 00:35:12 Chain[1]: find 126 asic, times 0
2021-08-11 00:35:22 Chain[2]: find 126 asic, times 0
2021-08-11 00:35:27 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-08-11 00:35:32 min freq in eeprom = 505
2021-08-11 00:35:32 fixed frequency is 505
2021-08-11 00:35:32 Bring up temperature is 26
2021-08-11 00:35:32 set UART baud to 12000000
2021-08-11 00:35:32 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-08-11 00:35:32 start do_core_reset
2021-08-11 00:35:53 end do_core_reset
2021-08-11 00:35:53 STATUS_INITED: soc init done!
2021-08-11 00:35:53 create thread check_miner_status_thread
2021-08-11 00:35:53 create thread check_system_work_thread
2021-08-11 00:40:54 WARN_NET_LOST: network connection lost
2021-08-11 00:40:54 will power off in 129 seconds in case not resume
2021-08-11 00:43:02 network connection lost for 5 min + 129 seconds, power off...
2021-08-11 00:43:03 chain avg vol drop to 10.33
2021-08-11 00:43:16 chain avg vol drop to 0.87
2021-08-11 01:05:54 30m avg rate is 0.00 in 32 mins
2021-08-11 01:19:00 reload pool, need recalculate
2021-08-11 01:19:00 set_start_time_point total_tv_start_sys=2725 total_tv_end_sys=2726
2021-08-11 01:19:01 network connection resume, restart
2021-08-11 01:19:01 ERROR_NET_LOST: network connection resume, restart...
2021-08-11 01:19:01 stop_mining_and_restart: network connection resume, restart...
2021-08-11 01:19:01 uninit_temp_info
2021-08-11 01:19:01 do not read temp anymore...
2021-08-11 01:19:01 cancel thread
2021-08-11 01:19:01 cancel thread
2021-08-11 01:19:01 cancel thread
2021-08-11 01:19:01 ****power off hashboard****
2021-08-11 01:19:01 start to init...
2021-08-11 01:19:01 set_voltage_by_steps to 1450.
2021-08-11 01:19:01 Version num 8
2021-08-11 01:19:01 Mask num 0xe000
2021-08-11 01:19:01 freq = 505, percent = 90, hcn = 5190, timeout = 373
2021-08-11 01:19:03 fixed step freq_start = 50, freq_end = 505, freq_step = 6.25
2021-08-11 01:19:03 chain = 0 set freq to 56.25
2021-08-11 01:19:03 chain = 1 set freq to 56.25
2021-08-11 01:19:03 chain = 2 set freq to 56.25
2021-08-11 01:19:04 chain = 0 set freq to 62.50
2021-08-11 01:19:04 chain = 1 set freq to 62.50
2021-08-11 01:19:04 chain = 2 set freq to 62.50
2021-08-11 01:19:04 chain = 0 set freq to 68.75
2021-08-11 01:19:04 chain = 1 set freq to 68.75
2021-08-11 01:19:04 chain = 2 set freq to 68.75
2021-08-11 01:19:04 chain = 0 set freq to 75.00
2021-08-11 01:19:04 chain = 1 set freq to 75.00
2021-08-11 01:19:04 chain = 2 set freq to 75.00
2021-08-11 01:19:04 chain = 0 set freq to 81.25
2021-08-11 01:19:04 chain = 1 set freq to 81.25
2021-08-11 01:19:04 chain = 2 set freq to 81.25
2021-08-11 01:19:04 chain = 0 set freq to 87.50
2021-08-11 01:19:04 chain = 1 set freq to 87.50
2021-08-11 01:19:04 chain = 2 set freq to 87.50
2021-08-11 01:19:04 chain = 0 set freq to 93.75
2021-08-11 01:19:04 chain = 1 set freq to 93.75
2021-08-11 01:19:04 chain = 2 set freq to 93.75
2021-08-11 01:19:04 temp monitor thread exit
2021-08-11 01:19:04 chain = 0 set freq to 100.00
2021-08-11 01:19:04 chain = 1 set freq to 100.00
2021-08-11 01:19:04 chain = 2 set freq to 100.00
2021-08-11 01:19:04 chain = 0 set freq to 106.25
2021-08-11 01:19:04 chain = 1 set freq to 106.25
2021-08-11 01:19:04 chain = 2 set freq to 106.25
2021-08-11 01:19:04 chain = 0 set freq to 112.50
2021-08-11 01:19:04 chain = 1 set freq to 112.50
2021-08-11 01:19:04 chain = 2 set freq to 112.50
2021-08-11 01:19:04 chain = 0 set freq to 118.75
2021-08-11 01:19:04 chain = 1 set freq to 118.75
2021-08-11 01:19:04 chain = 2 set freq to 118.75
2021-08-11 01:19:05 chain = 0 set freq to 125.00
2021-08-11 01:19:05 chain = 1 set freq to 125.00
2021-08-11 01:19:05 chain = 2 set freq to 125.00
2021-08-11 01:19:05 chain = 0 set freq to 131.25
2021-08-11 01:19:05 chain = 1 set freq to 131.25
2021-08-11 01:19:05 chain = 2 set freq to 131.25
2021-08-11 01:19:05 chain = 0 set freq to 137.50
2021-08-11 01:19:05 chain = 1 set freq to 137.50
2021-08-11 01:19:05 chain = 2 set freq to 137.50
2021-08-11 01:19:05 chain = 0 set freq to 143.75
2021-08-11 01:19:05 chain = 1 set freq to 143.75
2021-08-11 01:19:05 chain = 2 set freq to 143.75
2021-08-11 01:19:05 chain = 0 set freq to 150.00
2021-08-11 01:19:05 chain = 1 set freq to 150.00
2021-08-11 01:19:05 chain = 2 set freq to 150.00
2021-08-11 01:19:05 chain = 0 set freq to 156.25
2021-08-11 01:19:05 chain = 1 set freq to 156.25
2021-08-11 01:19:05 chain = 2 set freq to 156.25
2021-08-11 01:19:05 chain = 0 set freq to 162.50
2021-08-11 01:19:05 chain = 1 set freq to 162.50
2021-08-11 01:19:05 chain = 2 set freq to 162.50
2021-08-11 01:19:05 chain = 0 set freq to 168.75
2021-08-11 01:19:05 chain = 1 set freq to 168.75
2021-08-11 01:19:05 chain = 2 set freq to 168.75
2021-08-11 01:19:05 chain = 0 set freq to 175.00
2021-08-11 01:19:05 chain = 1 set freq to 175.00
2021-08-11 01:19:05 chain = 2 set freq to 175.00
2021-08-11 01:19:06 chain = 0 set freq to 181.25
2021-08-11 01:19:06 chain = 1 set freq to 181.25
2021-08-11 01:19:06 chain = 2 set freq to 181.25
2021-08-11 01:19:06 chain = 0 set freq to 187.50
2021-08-11 01:19:06 chain = 1 set freq to 187.50
2021-08-11 01:19:06 chain = 2 set freq to 187.50
2021-08-11 01:19:06 chain = 0 set freq to 193.75
2021-08-11 01:19:06 chain = 1 set freq to 193.75
2021-08-11 01:19:06 chain = 2 set freq to 193.75
2021-08-11 01:19:06 chain = 0 set freq to 200.00
2021-08-11 01:19:06 chain = 1 set freq to 200.00
2021-08-11 01:19:06 chain = 2 set freq to 200.00
2021-08-11 01:19:06 chain = 0 set freq to 206.25
2021-08-11 01:19:06 chain = 1 set freq to 206.25
2021-08-11 01:19:06 chain = 2 set freq to 206.25
2021-08-11 01:19:06 restart
2021-08-11 01:19:06 ****power off hashboard****
2021-08-11 01:19:06 chain = 0 set freq to 212.50
2021-08-11 01:19:06 chain = 1 set freq to 212.50
2021-08-11 01:19:06 chain = 2 set freq to 212.50
2021-08-11 01:19:06 chain = 0 set freq to 218.75
2021-08-11 01:19:06 chain = 1 set freq to 218.75
2021-08-11 01:19:06 chain = 2 set freq to 218.75
2021-08-11 01:19:06 chain = 0 set freq to 225.00
2021-08-11 01:19:06 chain = 1 set freq to 225.00
2021-08-11 01:19:06 chain = 2 set freq to 225.00
2021-08-11 01:19:06 chain = 0 set freq to 231.25
2021-08-11 01:19:06 chain = 1 set freq to 231.25
2021-08-11 01:19:06 chain = 2 set freq to 231.25
2021-08-11 01:19:06 chain = 0 set freq to 237.50
2021-08-11 01:19:06 chain = 1 set freq to 237.50
2021-08-11 01:19:06 chain = 2 set freq to 237.50
2021-08-11 01:19:07 chain = 0 set freq to 243.75
2021-08-11 01:19:07 chain = 1 set freq to 243.75
2021-08-11 01:19:07 chain = 2 set freq to 243.75
2021-08-11 01:19:07 chain = 0 set freq to 250.00
2021-08-11 01:19:07 chain = 1 set freq to 250.00
2021-08-11 01:19:07 chain = 2 set freq to 250.00
2021-08-11 01:19:07 chain = 0 set freq to 256.25
2021-08-11 01:19:07 chain = 1 set freq to 256.25
2021-08-11 01:19:07 chain = 2 set freq to 256.25
2021-08-11 01:19:07 chain = 0 set freq to 262.50
2021-08-11 01:19:07 chain = 1 set freq to 262.50
2021-08-11 01:19:07 chain = 2 set freq to 262.50
2021-08-11 01:19:07 chain = 0 set freq to 268.75
2021-08-11 01:19:07 chain = 1 set freq to 268.75
2021-08-11 01:19:07 chain = 2 set freq to 268.75
2021-08-11 01:19:07 chain = 0 set freq to 275.00
2021-08-11 01:19:07 chain = 1 set freq to 275.00
2021-08-11 01:19:07 chain = 2 set freq to 275.00
2021-08-11 01:19:07 chain = 0 set freq to 281.25
2021-08-11 01:19:07 chain = 1 set freq to 281.25
2021-08-11 01:19:07 chain = 2 set freq to 281.25
2021-08-11 01:19:07 chain = 0 set freq to 287.50
2021-08-11 01:19:07 chain = 1 set freq to 287.50
2021-08-11 01:19:07 chain = 2 set freq to 287.50
2021-08-11 01:19:07 chain = 0 set freq to 293.75
2021-08-11 01:19:07 chain = 1 set freq to 293.75
2021-08-11 01:19:07 chain = 2 set freq to 293.75
2021-08-11 01:19:08 chain = 0 set freq to 300.00
2021-08-11 01:19:08 chain = 1 set freq to 300.00
2021-08-11 01:19:08 chain = 2 set freq to 300.00
2021-08-11 01:19:08 chain = 0 set freq to 306.25
2021-08-11 01:19:08 chain = 1 set freq to 306.25
2021-08-11 01:19:08 chain = 2 set freq to 306.25
2021-08-11 01:19:08 chain = 0 set freq to 312.50
2021-08-11 01:19:08 chain = 1 set freq to 312.50
2021-08-11 01:19:08 chain = 2 set freq to 312.50
2021-08-11 01:19:08 chain = 0 set freq to 318.75
2021-08-11 01:19:08 chain = 1 set freq to 318.75
2021-08-11 01:19:08 chain = 2 set freq to 318.75
2021-08-11 01:19:08 chain = 0 set freq to 325.00
2021-08-11 01:19:08 chain = 1 set freq to 325.00
2021-08-11 01:19:08 chain = 2 set freq to 325.00
2021-08-11 01:19:08 chain = 0 set freq to 331.25
2021-08-11 01:19:08 chain = 1 set freq to 331.25
2021-08-11 01:19:08 chain = 2 set freq to 331.25
2021-08-11 01:19:08 chain = 0 set freq to 337.50
2021-08-11 01:19:08 chain = 1 set freq to 337.50
2021-08-11 01:19:08 chain = 2 set freq to 337.50
2021-08-11 01:19:08 chain = 0 set freq to 343.75
2021-08-11 01:19:08 chain = 1 set freq to 343.75
2021-08-11 01:19:08 chain = 2 set freq to 343.75
2021-08-11 01:19:08 chain = 0 set freq to 350.00
2021-08-11 01:19:08 chain = 1 set freq to 350.00
2021-08-11 01:19:08 chain = 2 set freq to 350.00
2021-08-11 01:19:08 chain = 0 set freq to 356.25
2021-08-11 01:19:08 chain = 1 set freq to 356.25
2021-08-11 01:19:08 chain = 2 set freq to 356.25
2021-08-11 01:19:09 chain = 0 set freq to 362.50
2021-08-11 01:19:09 chain = 1 set freq to 362.50
2021-08-11 01:19:09 chain = 2 set freq to 362.50
2021-08-11 01:19:09 chain = 0 set freq to 368.75
2021-08-11 01:19:09 chain = 1 set freq to 368.75
2021-08-11 01:19:09 chain = 2 set freq to 368.75
2021-08-11 01:19:09 chain = 0 set freq to 375.00
2021-08-11 01:19:09 chain = 1 set freq to 375.00
2021-08-11 01:19:09 chain = 2 set freq to 375.00
2021-08-11 01:19:09 chain = 0 set freq to 381.25
2021-08-11 01:19:09 chain = 1 set freq to 381.25
2021-08-11 01:19:09 chain = 2 set freq to 381.25
2021-08-11 01:19:09 chain = 0 set freq to 387.50
2021-08-11 01:19:09 chain = 1 set freq to 387.50
2021-08-11 01:19:09 chain = 2 set freq to 387.50
2021-08-11 01:19:09 chain = 0 set freq to 393.75
2021-08-11 01:19:09 chain = 1 set freq to 393.75
2021-08-11 01:19:09 chain = 2 set freq to 393.75
2021-08-11 01:19:09 chain = 0 set freq to 400.00
2021-08-11 01:19:09 chain = 1 set freq to 400.00
2021-08-11 01:19:09 chain = 2 set freq to 400.00
2021-08-11 01:19:09 chain = 0 set freq to 406.25
2021-08-11 01:19:09 chain = 1 set freq to 406.25
2021-08-11 01:19:09 chain = 2 set freq to 406.25
2021-08-11 01:19:09 chain = 0 set freq to 412.50
2021-08-11 01:19:09 chain = 1 set freq to 412.50
2021-08-11 01:19:09 chain = 2 set freq to 412.50
2021-08-11 01:19:09 chain = 0 set freq to 418.75
2021-08-11 01:19:09 chain = 1 set freq to 418.75
2021-08-11 01:19:09 chain = 2 set freq to 418.75
2021-08-11 01:19:10 chain = 0 set freq to 425.00
2021-08-11 01:19:10 chain = 1 set freq to 425.00
2021-08-11 01:19:10 chain = 2 set freq to 425.00
2021-08-11 01:19:10 chain = 0 set freq to 431.25
2021-08-11 01:19:10 chain = 1 set freq to 431.25
2021-08-11 01:19:10 chain = 2 set freq to 431.25
2021-08-11 01:19:10 chain = 0 set freq to 437.50
2021-08-11 01:19:10 chain = 1 set freq to 437.50
2021-08-11 01:19:10 chain = 2 set freq to 437.50
2021-08-11 01:19:10 chain = 0 set freq to 443.75
2021-08-11 01:19:10 chain = 1 set freq to 443.75
2021-08-11 01:19:10 chain = 2 set freq to 443.75
2021-08-11 01:19:10 chain = 0 set freq to 450.00
2021-08-11 01:19:10 chain = 1 set freq to 450.00
2021-08-11 01:19:10 chain = 2 set freq to 450.00
2021-08-11 01:19:25 Miner compile time: Fri May 28 17:43:03 CST 2021 type: Antminer S19j Pro
2021-08-11 01:19:26 This is fix-freq version
2021-08-11 01:19:26 Miner compile time: Fri May 28 17:43:03 CST 2021 type: Antminer S19j Pro
2021-08-11 01:19:26 commit version: caca14d 2021-05-28 14:17:34, build by: jenkins 2021-05-28 17:43:02
2021-08-11 01:19:26 opt_multi_version = 1
2021-08-11 01:19:26 opt_bitmain_ab = 1
2021-08-11 01:19:26 mid_auto_gen = 0
2021-08-11 01:19:26 opt_bitmain_work_mode = 0
2021-08-11 01:19:26 mmap fpga_mem_addr_hal = 0xb5900000
2021-08-11 01:19:26 HASH_ON_PLUG V9 = 0x7
2021-08-11 01:19:26 Note: front fan is power on!
2021-08-11 01:19:26 Note: rear fan is power on!
2021-08-11 01:19:26 start the http log.
2021-08-11 01:19:26 httpListenThread start ret=0
2021-08-11 01:19:26 start listen on 6060 ...
2021-08-11 01:19:26 load machine BHB42601 conf
2021-08-11 01:19:26 machine : BHB42601
2021-08-11 01:19:26 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
2021-08-11 01:19:32 miner ID : 803295064e10481c
2021-08-11 01:19:32 FPGA Version = 0xB031
2021-08-11 01:19:32 HASH_ON_PLUG V9 = 0x7
2021-08-11 01:19:32 ==========================capability start==========================
2021-08-11 01:19:32 board num = 3
2021-08-11 01:19:32 board id = 0, chain num = 1
2021-08-11 01:19:32 chain id = 0
2021-08-11 01:19:32 board id = 1, chain num = 1
2021-08-11 01:19:32 chain id = 1
2021-08-11 01:19:32 board id = 2, chain num = 1
2021-08-11 01:19:32 chain id = 2
2021-08-11 01:19:32 ==========================capability end============================
2021-08-11 01:19:32 chain num = 3
2021-08-11 01:19:34 load chain 0 eeprom data
2021-08-11 01:19:34 board_info_version = 4
2021-08-11 01:19:34 algorithm_and_key_version = 0x11
2021-08-11 01:19:34 board_sn = YDFTYN3BAJEAG0EXK
2021-08-11 01:19:34 chip_die = ED
2021-08-11 01:19:34 chip_marking = S1C021AU09
2021-08-11 01:19:34 chip_bin = 5
2021-08-11 01:19:34 ft_version = F1V04B2C1
2021-08-11 01:19:34 pcb_version = 0x100
2021-08-11 01:19:34 bom_version = 0x10
2021-08-11 01:19:34 asic_sensor_type = 0x0
2021-08-11 01:19:34 asic_sensor_addr[0] = 0x0
2021-08-11 01:19:34 asic_sensor_addr[1] = 0x0
2021-08-11 01:19:34 asic_sensor_addr[2] = 0x0
2021-08-11 01:19:34 asic_sensor_addr[3] = 0x0
2021-08-11 01:19:34 pic_sensor_type = 0x81
2021-08-11 01:19:34 pic_sensor_addr = 0x1
2021-08-11 01:19:34 chip_tech = AA
2021-08-11 01:19:34 board_name = BHB42601
2021-08-11 01:19:34 factory_job = YDFT20210517002-ZB
2021-08-11 01:19:34 board_info_crc = 0x16
2021-08-11 01:19:34 voltage = 1320
2021-08-11 01:19:34 frequency = 505
2021-08-11 01:19:34 nonce_rate = 9977
2021-08-11 01:19:34 pcb_temp_in = 35
2021-08-11 01:19:34 pcb_temp_out = 38
2021-08-11 01:19:34 test_version = 1
2021-08-11 01:19:34 test_standard = 0
2021-08-11 01:19:34 param_info_crc = 0xe
2021-08-11 01:19:34 pt1_result = 1
2021-08-11 01:19:34 pt1_count = 1
2021-08-11 01:19:34 pt2_result = 1
2021-08-11 01:19:34 pt2_count = 1
2021-08-11 01:19:36 load chain 1 eeprom data
2021-08-11 01:19:36 board_info_version = 4
2021-08-11 01:19:36 algorithm_and_key_version = 0x11
2021-08-11 01:19:36 board_sn = YDFTYN3BAJEAG0EX8
2021-08-11 01:19:36 chip_die = ED
2021-08-11 01:19:36 chip_marking = S1CT21AY34
2021-08-11 01:19:36 chip_bin = 5
2021-08-11 01:19:36 ft_version = F1V04B2C1
2021-08-11 01:19:36 pcb_version = 0x100
2021-08-11 01:19:36 bom_version = 0x10
2021-08-11 01:19:36 asic_sensor_type = 0x0
2021-08-11 01:19:36 asic_sensor_addr[0] = 0x0
2021-08-11 01:19:36 asic_sensor_addr[1] = 0x0
2021-08-11 01:19:36 asic_sensor_addr[2] = 0x0
2021-08-11 01:19:36 asic_sensor_addr[3] = 0x0
2021-08-11 01:19:36 pic_sensor_type = 0x81
2021-08-11 01:19:36 pic_sensor_addr = 0x1
2021-08-11 01:19:36 chip_tech = AA
2021-08-11 01:19:36 board_name = BHB42601
2021-08-11 01:19:36 factory_job = YDFT20210517002-ZB
2021-08-11 01:19:36 board_info_crc = 0xe
2021-08-11 01:19:36 voltage = 1320
2021-08-11 01:19:36 frequency = 505
2021-08-11 01:19:36 nonce_rate = 9967
2021-08-11 01:19:36 pcb_temp_in = 33
2021-08-11 01:19:36 pcb_temp_out = 34
2021-08-11 01:19:36 test_version = 1
2021-08-11 01:19:36 test_standard = 0
2021-08-11 01:19:36 param_info_crc = 0xd
2021-08-11 01:19:36 pt1_result = 1
2021-08-11 01:19:36 pt1_count = 1
2021-08-11 01:19:36 pt2_result = 1
2021-08-11 01:19:36 pt2_count = 1
2021-08-11 01:19:38 load chain 2 eeprom data
2021-08-11 01:19:38 board_info_version = 4
2021-08-11 01:19:38 algorithm_and_key_version = 0x11
2021-08-11 01:19:38 board_sn = YDFTYN3BAJEAG0EWL
2021-08-11 01:19:38 chip_die = ED
2021-08-11 01:19:38 chip_marking = S1CT21AY34
2021-08-11 01:19:38 chip_bin = 5
2021-08-11 01:19:38 ft_version = F1V04B2C1
2021-08-11 01:19:38 pcb_version = 0x100
2021-08-11 01:19:38 bom_version = 0x10
2021-08-11 01:19:38 asic_sensor_type = 0x0
2021-08-11 01:19:38 asic_sensor_addr[0] = 0x0
2021-08-11 01:19:38 asic_sensor_addr[1] = 0x0
2021-08-11 01:19:38 asic_sensor_addr[2] = 0x0
2021-08-11 01:19:38 asic_sensor_addr[3] = 0x0
2021-08-11 01:19:38 pic_sensor_type = 0x81
2021-08-11 01:19:38 pic_sensor_addr = 0x1
2021-08-11 01:19:38 chip_tech = AA
2021-08-11 01:19:38 board_name = BHB42601
2021-08-11 01:19:38 factory_job = YDFT20210517002-ZB
2021-08-11 01:19:38 board_info_crc = 0xd
2021-08-11 01:19:38 voltage = 1320
2021-08-11 01:19:38 frequency = 505
2021-08-11 01:19:38 nonce_rate = 9982
2021-08-11 01:19:38 pcb_temp_in = 33
2021-08-11 01:19:38 pcb_temp_out = 34
2021-08-11 01:19:38 test_version = 1
2021-08-11 01:19:38 test_standard = 0
2021-08-11 01:19:38 param_info_crc = 0x9
2021-08-11 01:19:38 pt1_result = 1
2021-08-11 01:19:38 pt1_count = 1
2021-08-11 01:19:38 pt2_result = 1
2021-08-11 01:19:38 pt2_count = 1
2021-08-11 01:19:38 fan_eft : 0 fan_pwm : 100
2021-08-11 01:19:38 create thread get_nonce_and_register_thread
2021-08-11 01:19:38 fixed working voltage = 1320
2021-08-11 01:19:38 Chain [0] PCB Version: 0x0100
2021-08-11 01:19:38 Chain [0] BOM Version: 0x0010
2021-08-11 01:19:38 Chain [1] PCB Version: 0x0100
2021-08-11 01:19:38 Chain [1] BOM Version: 0x0010
2021-08-11 01:19:38 Chain [2] PCB Version: 0x0100
2021-08-11 01:19:38 Chain [2] BOM Version: 0x0010
2021-08-11 01:19:40 Fan check passed.
2021-08-11 01:19:40 chain[0] PIC jump to app
2021-08-11 01:19:42 Check chain[0] PIC fw version=0x89
2021-08-11 01:19:43 chain[1] PIC jump to app
2021-08-11 01:19:45 Check chain[1] PIC fw version=0x89
2021-08-11 01:19:46 chain[2] PIC jump to app
2021-08-11 01:19:47 Check chain[2] PIC fw version=0x89
2021-08-11 01:19:48 create thread pic_heart_beat_thread
2021-08-11 01:19:48 max sensor num = 4
2021-08-11 01:19:48 temperature_monitor_thread start...
2021-08-11 01:19:52 power type version: 0x0071
2021-08-11 01:19:52 Enter sleep to make sure power release finish.
2021-08-11 01:20:23 Slept 30 seconds, diff = 1.
2021-08-11 01:20:24 set_voltage_by_steps to 1500.
2021-08-11 01:20:29 start up min temp by 75a = 26
2021-08-11 01:20:29 set UART baud to 115200
2021-08-11 01:20:32 chain avg vol rise to 15.27
2021-08-11 01:20:39 Chain[0]: find 126 asic, times 0
2021-08-11 01:20:49 Chain[1]: find 126 asic, times 0
2021-08-11 01:20:59 Chain[2]: find 126 asic, times 0
2021-08-11 01:21:04 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-08-11 01:21:09 min freq in eeprom = 505
2021-08-11 01:21:09 fixed frequency is 505
2021-08-11 01:21:09 Bring up temperature is 26
2021-08-11 01:21:09 set UART baud to 12000000
2021-08-11 01:21:09 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-08-11 01:21:09 start do_core_reset
2021-08-11 01:21:30 end do_core_reset
2021-08-11 01:21:30 STATUS_INITED: soc init done!
2021-08-11 01:21:30 create thread check_miner_status_thread
2021-08-11 01:21:30 create thread check_system_work_thread
2021-08-11 01:21:32 start to init...
2021-08-11 01:21:32 set_voltage_by_steps to 1450.
2021-08-11 01:21:35 fixed step freq_start = 50, freq_end = 505, freq_step = 6.25
2021-08-11 01:21:35 chain = 0 set freq to 56.25
2021-08-11 01:21:35 chain = 1 set freq to 56.25
2021-08-11 01:21:35 chain = 2 set freq to 56.25
2021-08-11 01:21:35 chain = 0 set freq to 62.50
2021-08-11 01:21:35 chain = 1 set freq to 62.50
2021-08-11 01:21:35 chain = 2 set freq to 62.50
2021-08-11 01:21:35 chain = 0 set freq to 68.75
2021-08-11 01:21:35 chain = 1 set freq to 68.75
2021-08-11 01:21:35 chain = 2 set freq to 68.75
2021-08-11 01:21:35 chain = 0 set freq to 75.00
2021-08-11 01:21:35 chain = 1 set freq to 75.00
2021-08-11 01:21:35 chain = 2 set freq to 75.00
2021-08-11 01:21:35 chain = 0 set freq to 81.25
2021-08-11 01:21:35 chain = 1 set freq to 81.25
2021-08-11 01:21:35 chain = 2 set freq to 81.25
2021-08-11 01:21:35 chain = 0 set freq to 87.50
2021-08-11 01:21:35 chain = 1 set freq to 87.50
2021-08-11 01:21:35 chain = 2 set freq to 87.50
2021-08-11 01:21:35 chain = 0 set freq to 93.75
2021-08-11 01:21:35 chain = 1 set freq to 93.75
2021-08-11 01:21:35 chain = 2 set freq to 93.75
2021-08-11 01:21:35 chain = 0 set freq to 100.00
2021-08-11 01:21:35 chain = 1 set freq to 100.00
2021-08-11 01:21:35 chain = 2 set freq to 100.00
2021-08-11 01:21:35 chain = 0 set freq to 106.25
2021-08-11 01:21:35 chain = 1 set freq to 106.25
2021-08-11 01:21:35 chain = 2 set freq to 106.25
2021-08-11 01:21:36 chain = 0 set freq to 112.50
2021-08-11 01:21:36 chain = 1 set freq to 112.50
2021-08-11 01:21:36 chain = 2 set freq to 112.50
2021-08-11 01:21:36 chain = 0 set freq to 118.75
2021-08-11 01:21:36 chain = 1 set freq to 118.75
2021-08-11 01:21:36 chain = 2 set freq to 118.75
2021-08-11 01:21:36 chain = 0 set freq to 125.00
2021-08-11 01:21:36 chain = 1 set freq to 125.00
2021-08-11 01:21:36 chain = 2 set freq to 125.00
2021-08-11 01:21:36 chain = 0 set freq to 131.25
2021-08-11 01:21:36 chain = 1 set freq to 131.25
2021-08-11 01:21:36 chain = 2 set freq to 131.25
2021-08-11 01:21:36 chain = 0 set freq to 137.50
2021-08-11 01:21:36 chain = 1 set freq to 137.50
2021-08-11 01:21:36 chain = 2 set freq to 137.50
2021-08-11 01:21:36 chain = 0 set freq to 143.75
2021-08-11 01:21:36 chain = 1 set freq to 143.75
2021-08-11 01:21:36 chain = 2 set freq to 143.75
2021-08-11 01:21:36 chain = 0 set freq to 150.00
2021-08-11 01:21:36 chain = 1 set freq to 150.00
2021-08-11 01:21:36 chain = 2 set freq to 150.00
2021-08-11 01:21:36 chain = 0 set freq to 156.25
2021-08-11 01:21:36 chain = 1 set freq to 156.25
2021-08-11 01:21:36 chain = 2 set freq to 156.25
2021-08-11 01:21:36 chain = 0 set freq to 162.50
2021-08-11 01:21:36 chain = 1 set freq to 162.50
2021-08-11 01:21:36 chain = 2 set freq to 162.50
2021-08-11 01:21:36 chain = 0 set freq to 168.75
2021-08-11 01:21:36 chain = 1 set freq to 168.75
2021-08-11 01:21:36 chain = 2 set freq to 168.75
2021-08-11 01:21:37 chain = 0 set freq to 175.00
2021-08-11 01:21:37 chain = 1 set freq to 175.00
2021-08-11 01:21:37 chain = 2 set freq to 175.00
2021-08-11 01:21:37 chain = 0 set freq to 181.25
2021-08-11 01:21:37 chain = 1 set freq to 181.25
2021-08-11 01:21:37 chain = 2 set freq to 181.25
2021-08-11 01:21:37 chain = 0 set freq to 187.50
2021-08-11 01:21:37 chain = 1 set freq to 187.50
2021-08-11 01:21:37 chain = 2 set freq to 187.50
2021-08-11 01:21:37 chain = 0 set freq to 193.75
2021-08-11 01:21:37 chain = 1 set freq to 193.75
2021-08-11 01:21:37 chain = 2 set freq to 193.75
2021-08-11 01:21:37 chain = 0 set freq to 200.00
2021-08-11 01:21:37 chain = 1 set freq to 200.00
2021-08-11 01:21:37 chain = 2 set freq to 200.00
2021-08-11 01:21:37 chain = 0 set freq to 206.25
2021-08-11 01:21:37 chain = 1 set freq to 206.25
2021-08-11 01:21:37 chain = 2 set freq to 206.25
2021-08-11 01:21:37 chain = 0 set freq to 212.50
2021-08-11 01:21:37 chain = 1 set freq to 212.50
2021-08-11 01:21:37 chain = 2 set freq to 212.50
2021-08-11 01:21:37 chain = 0 set freq to 218.75
2021-08-11 01:21:37 chain = 1 set freq to 218.75
2021-08-11 01:21:37 chain = 2 set freq to 218.75
2021-08-11 01:21:37 chain = 0 set freq to 225.00
2021-08-11 01:21:37 chain = 1 set freq to 225.00
2021-08-11 01:21:37 chain = 2 set freq to 225.00
2021-08-11 01:21:37 chain = 0 set freq to 231.25
2021-08-11 01:21:37 chain = 1 set freq to 231.25
2021-08-11 01:21:37 chain = 2 set freq to 231.25
2021-08-11 01:21:38 chain = 0 set freq to 237.50
2021-08-11 01:21:38 chain = 1 set freq to 237.50
2021-08-11 01:21:38 chain = 2 set freq to 237.50
2021-08-11 01:21:38 chain = 0 set freq to 243.75
2021-08-11 01:21:38 chain = 1 set freq to 243.75
2021-08-11 01:21:38 chain = 2 set freq to 243.75
2021-08-11 01:21:38 chain = 0 set freq to 250.00
2021-08-11 01:21:38 chain = 1 set freq to 250.00
2021-08-11 01:21:38 chain = 2 set freq to 250.00
2021-08-11 01:21:38 chain = 0 set freq to 256.25
2021-08-11 01:21:38 chain = 1 set freq to 256.25
2021-08-11 01:21:38 chain = 2 set freq to 256.25
2021-08-11 01:21:38 chain = 0 set freq to 262.50
2021-08-11 01:21:38 chain = 1 set freq to 262.50
2021-08-11 01:21:38 chain = 2 set freq to 262.50
2021-08-11 01:21:38 chain = 0 set freq to 268.75
2021-08-11 01:21:38 chain = 1 set freq to 268.75
2021-08-11 01:21:38 chain = 2 set freq to 268.75
2021-08-11 01:21:38 chain = 0 set freq to 275.00
2021-08-11 01:21:38 chain = 1 set freq to 275.00
2021-08-11 01:21:38 chain = 2 set freq to 275.00
2021-08-11 01:21:38 chain = 0 set freq to 281.25
2021-08-11 01:21:38 chain = 1 set freq to 281.25
2021-08-11 01:21:38 chain = 2 set freq to 281.25
2021-08-11 01:21:38 chain = 0 set freq to 287.50
2021-08-11 01:21:38 chain = 1 set freq to 287.50
2021-08-11 01:21:38 chain = 2 set freq to 287.50
2021-08-11 01:21:39 chain = 0 set freq to 293.75
2021-08-11 01:21:39 chain = 1 set freq to 293.75
2021-08-11 01:21:39 chain = 2 set freq to 293.75
2021-08-11 01:21:39 chain = 0 set freq to 300.00
2021-08-11 01:21:39 chain = 1 set freq to 300.00
2021-08-11 01:21:39 chain = 2 set freq to 300.00
2021-08-11 01:21:39 chain = 0 set freq to 306.25
2021-08-11 01:21:39 chain = 1 set freq to 306.25
2021-08-11 01:21:39 chain = 2 set freq to 306.25
2021-08-11 01:21:39 chain = 0 set freq to 312.50
2021-08-11 01:21:39 chain = 1 set freq to 312.50
2021-08-11 01:21:39 chain = 2 set freq to 312.50
2021-08-11 01:21:39 chain = 0 set freq to 318.75
2021-08-11 01:21:39 chain = 1 set freq to 318.75
2021-08-11 01:21:39 chain = 2 set freq to 318.75
2021-08-11 01:21:39 chain = 0 set freq to 325.00
2021-08-11 01:21:39 chain = 1 set freq to 325.00
2021-08-11 01:21:39 chain = 2 set freq to 325.00
2021-08-11 01:21:39 chain = 0 set freq to 331.25
2021-08-11 01:21:39 chain = 1 set freq to 331.25
2021-08-11 01:21:39 chain = 2 set freq to 331.25
2021-08-11 01:21:39 chain = 0 set freq to 337.50
2021-08-11 01:21:39 chain = 1 set freq to 337.50
2021-08-11 01:21:39 chain = 2 set freq to 337.50
2021-08-11 01:21:39 chain = 0 set freq to 343.75
2021-08-11 01:21:39 chain = 1 set freq to 343.75
2021-08-11 01:21:39 chain = 2 set freq to 343.75
2021-08-11 01:21:39 chain = 0 set freq to 350.00
2021-08-11 01:21:39 chain = 1 set freq to 350.00
2021-08-11 01:21:39 chain = 2 set freq to 350.00
2021-08-11 01:21:40 chain = 0 set freq to 356.25
2021-08-11 01:21:40 chain = 1 set freq to 356.25
2021-08-11 01:21:40 chain = 2 set freq to 356.25
2021-08-11 01:21:40 chain = 0 set freq to 362.50
2021-08-11 01:21:40 chain = 1 set freq to 362.50
2021-08-11 01:21:40 chain = 2 set freq to 362.50
2021-08-11 01:21:40 chain = 0 set freq to 368.75
2021-08-11 01:21:40 chain = 1 set freq to 368.75
2021-08-11 01:21:40 chain = 2 set freq to 368.75
2021-08-11 01:21:40 chain = 0 set freq to 375.00
2021-08-11 01:21:40 chain = 1 set freq to 375.00
2021-08-11 01:21:40 chain = 2 set freq to 375.00
2021-08-11 01:21:40 chain = 0 set freq to 381.25
2021-08-11 01:21:40 chain = 1 set freq to 381.25
2021-08-11 01:21:40 chain = 2 set freq to 381.25
2021-08-11 01:21:40 chain = 0 set freq to 387.50
2021-08-11 01:21:40 chain = 1 set freq to 387.50
2021-08-11 01:21:40 chain = 2 set freq to 387.50
2021-08-11 01:21:40 chain = 0 set freq to 393.75
2021-08-11 01:21:40 chain = 1 set freq to 393.75
2021-08-11 01:21:40 chain = 2 set freq to 393.75
2021-08-11 01:21:40 chain = 0 set freq to 400.00
2021-08-11 01:21:40 chain = 1 set freq to 400.00
2021-08-11 01:21:40 chain = 2 set freq to 400.00
2021-08-11 01:21:40 chain = 0 set freq to 406.25
2021-08-11 01:21:40 chain = 1 set freq to 406.25
2021-08-11 01:21:40 chain = 2 set freq to 406.25
2021-08-11 01:21:40 chain = 0 set freq to 412.50
2021-08-11 01:21:40 chain = 1 set freq to 412.50
2021-08-11 01:21:40 chain = 2 set freq to 412.50
2021-08-11 01:21:41 chain = 0 set freq to 418.75
2021-08-11 01:21:41 chain = 1 set freq to 418.75
2021-08-11 01:21:41 chain = 2 set freq to 418.75
2021-08-11 01:21:41 chain = 0 set freq to 425.00
2021-08-11 01:21:41 chain = 1 set freq to 425.00
2021-08-11 01:21:41 chain = 2 set freq to 425.00
2021-08-11 01:21:41 chain = 0 set freq to 431.25
2021-08-11 01:21:41 chain = 1 set freq to 431.25
2021-08-11 01:21:41 chain = 2 set freq to 431.25
2021-08-11 01:21:41 chain = 0 set freq to 437.50
2021-08-11 01:21:41 chain = 1 set freq to 437.50
2021-08-11 01:21:41 chain = 2 set freq to 437.50
2021-08-11 01:21:41 chain = 0 set freq to 443.75
2021-08-11 01:21:41 chain = 1 set freq to 443.75
2021-08-11 01:21:41 chain = 2 set freq to 443.75
2021-08-11 01:21:41 chain = 0 set freq to 450.00
2021-08-11 01:21:41 chain = 1 set freq to 450.00
2021-08-11 01:21:41 chain = 2 set freq to 450.00
2021-08-11 01:21:41 chain = 0 set freq to 456.25
2021-08-11 01:21:41 chain = 1 set freq to 456.25
2021-08-11 01:21:41 chain = 2 set freq to 456.25
2021-08-11 01:21:41 chain = 0 set freq to 462.50
2021-08-11 01:21:41 chain = 1 set freq to 462.50
2021-08-11 01:21:41 chain = 2 set freq to 462.50
2021-08-11 01:21:41 chain = 0 set freq to 468.75
2021-08-11 01:21:41 chain = 1 set freq to 468.75
2021-08-11 01:21:41 chain = 2 set freq to 468.75
2021-08-11 01:21:42 chain = 0 set freq to 475.00
2021-08-11 01:21:42 chain = 1 set freq to 475.00
2021-08-11 01:21:42 chain = 2 set freq to 475.00
2021-08-11 01:21:42 chain = 0 set freq to 481.25
2021-08-11 01:21:42 chain = 1 set freq to 481.25
2021-08-11 01:21:42 chain = 2 set freq to 481.25
2021-08-11 01:21:42 chain = 0 set freq to 487.50
2021-08-11 01:21:42 chain = 1 set freq to 487.50
2021-08-11 01:21:42 chain = 2 set freq to 487.50
2021-08-11 01:21:42 chain = 0 set freq to 493.75
2021-08-11 01:21:42 chain = 1 set freq to 493.75
2021-08-11 01:21:42 chain = 2 set freq to 493.75
2021-08-11 01:21:42 chain = 0 set freq to 500.00
2021-08-11 01:21:42 chain = 1 set freq to 500.00
2021-08-11 01:21:42 chain = 2 set freq to 500.00
2021-08-11 01:21:42 chain = 0 set freq to 505.00
2021-08-11 01:21:42 chain = 1 set freq to 505.00
2021-08-11 01:21:42 chain = 2 set freq to 505.00
2021-08-11 01:21:43 set_voltage_by_steps to 1320.
2021-08-11 01:21:45 Init done!
2021-08-11 01:21:45 STATUS_OKAY
2021-08-11 01:21:45 start the cached job
2021-08-11 01:21:45 Version num 8
2021-08-11 01:21:45 Mask num 0xe000
2021-08-11 01:21:45 freq = 505, percent = 90, hcn = 5190, timeout = 373
2021-08-11 01:21:45 set_start_time_point total_tv_start_sys=2889 total_tv_end_sys=2890
2021-08-11 01:21:45 set_voltage_by_steps to 1344.
2021-08-11 01:22:47 set_voltage_by_steps to 1334.
2021-08-11 01:22:49 set_voltage_by_steps to 1324.
2021-08-11 01:22:52 curr_vol = 1324, g_voltage = 1320,entrance_temp = 26
2021-08-11 01:22:52 set_voltage_by_steps to 1320.
2021-08-11 01:24:19 reload pool, need recalculate
2021-08-11 01:24:19 set_start_time_point total_tv_start_sys=3044 total_tv_end_sys=3045
2021-08-11 01:27:44 reload pool, need recalculate
2021-08-11 01:27:44 set_start_time_point total_tv_start_sys=3249 total_tv_end_sys=3250
2021-08-11 01:51:31 30m avg rate is 98001.39 in 23 mins
2021-08-11 02:21:33 30m avg rate is 98358.09 in 30 mins
2021-08-11 02:51:35 30m avg rate is 97750.98 in 30 mins
2021-08-11 03:21:37 30m avg rate is 97893.16 in 30 mins
2021-08-11 03:51:39 30m avg rate is 97770.50 in 30 mins
2021-08-11 04:21:40 30m avg rate is 97773.55 in 30 mins
2021-08-11 04:51:42 30m avg rate is 97791.25 in 30 mins
2021-08-11 05:21:44 30m avg rate is 98314.77 in 30 mins
2021-08-11 05:51:46 30m avg rate is 98090.23 in 30 mins
2021-08-11 06:21:48 30m avg rate is 97996.95 in 30 mins
2021-08-11 06:51:50 30m avg rate is 98056.06 in 30 mins
2021-08-11 07:21:51 30m avg rate is 98059.72 in 30 mins
2021-08-11 07:51:53 30m avg rate is 97602.10 in 30 mins
2021-08-11 08:21:55 30m avg rate is 98028.60 in 30 mins
2021-08-11 08:51:57 30m avg rate is 97903.52 in 30 mins
2021-08-11 09:21:59 30m avg rate is 97918.77 in 30 mins
2021-08-11 09:52:01 30m avg rate is 97583.64 in 30 mins
2021-08-11 10:22:03 30m avg rate is 97696.06 in 30 mins
2021-08-11 10:52:04 30m avg rate is 97495.32 in 30 mins
2021-08-11 11:22:06 30m avg rate is 97627.72 in 30 mins
2021-08-11 11:52:08 30m avg rate is 97488.00 in 30 mins
2021-08-11 12:22:10 30m avg rate is 98021.28 in 30 mins
2021-08-11 12:33:41 over max temp, pcb temp 76 (max 75), chip temp 91(max 95) pcb temp rise 0 chip temp rise 0, total_exit_failure 0
2021-08-11 12:33:41 ERROR_TEMP_TOO_HIGH: over max temp
2021-08-11 12:33:41 stop_mining: over max temp
2021-08-11 12:33:41 uninit_temp_info
2021-08-11 12:33:41 do not read temp anymore...
2021-08-11 12:33:41 cancel thread
2021-08-11 12:33:41 cancel thread
2021-08-11 12:33:41 cancel thread
2021-08-11 12:33:41 ****power off hashboard****
2021-08-11 12:33:45 temp monitor thread exit
2021-08-11 12:51:43 Sweep error string = R:1.
2021-08-11 12:51:43 Sweep error string = R:1.
2021-08-11 12:51:43 Sweep error string = R:1.
2021-08-11 12:51:59 Sweep error string = R:1.
2021-08-11 12:51:59 Sweep error string = R:1.
2021-08-11 12:52:00 Sweep error string = R:1.
2021-08-11 12:52:11 Sweep error string = R:1.
2021-08-11 12:52:11 avg rate is lower than ideal rate, 37344.93 in 30 mins
2021-08-11 12:52:11 30m avg rate is 37344.93 in 30 mins
2021-08-11 12:52:11 chain 0 hash rate 0.00 low in 15 mins
2021-08-11 12:52:11 chain 1 hash rate 0.00 low in 15 mins
2021-08-11 12:52:11 chain 2 hash rate 0.00 low in 15 mins
2021-08-11 12:52:14 Sweep error string = R:1.
2021-08-11 12:52:14 Sweep error string = R:1.
2021-08-11 12:52:14 Sweep error string = R:1.
2021-08-11 12:52:26 Sweep error string = R:1.
2021-08-11 12:52:27 Sweep error string = R:1.
2021-08-11 12:52:27 Sweep error string = R:1.
2021-08-11 12:52:43 Sweep error string = R:1.
2021-08-11 12:52:43 Sweep error string = R:1.
2021-08-11 12:52:43 Sweep error string = R:1.
2021-08-11 12:52:44 Sweep error string = R:1.
2021-08-11 12:52:45 Sweep error string = R:1.
2021-08-11 12:52:45 Sweep error string = R:1.
2021-08-11 12:53:23 Sweep error string = R:1.
2021-08-11 12:53:23 Sweep error string = R:1.
2021-08-11 12:53:24 Sweep error string = R:1.
2021-08-11 12:53:24 Sweep error string = R:1.
2021-08-11 12:53:25 Sweep error string = R:1.
2021-08-11 12:53:25 Sweep error string = R:1.
2021-08-11 12:53:39 Sweep error string = R:1.
2021-08-11 12:53:39 Sweep error string = R:1.
2021-08-11 12:53:39 Sweep error string = R:1.
2021-08-11 12:53:54 Sweep error string = R:1.
2021-08-11 12:53:54 Sweep error string = R:1.
2021-08-11 12:53:54 Sweep error string = R:1.
2021-08-11 12:54:16 Sweep error string = R:1.
2021-08-11 12:54:16 Sweep error string = R:1.
2021-08-11 12:54:17 Sweep error string = R:1.
2021-08-11 12:54:31 Sweep error string = R:1.
2021-08-11 12:54:31 Sweep error string = R:1.
2021-08-11 12:54:32 Sweep error string = R:1.
1970-01-01 00:00:09 Miner compile time: Fri May 28 17:43:03 CST 2021 type: Antminer S19j Pro
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Fri May 28 17:43:03 CST 2021 type: Antminer S19j Pro
1970-01-01 00:00:10 commit version: caca14d 2021-05-28 14:17:34, build by: jenkins 2021-05-28 17:43:02
1970-01-01 00:00:10 opt_multi_version = 1
1970-01-01 00:00:10 opt_bitmain_ab = 1
1970-01-01 00:00:10 mid_auto_gen = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5900000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine BHB42601 conf
1970-01-01 00:00:10 machine : BHB42601
1970-01-01 00:00:10 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
2021-08-11 12:54:57 miner ID : 803295064e10481c
2021-08-11 12:54:57 FPGA Version = 0xB031
2021-08-11 12:54:57 HASH_ON_PLUG V9 = 0x7
2021-08-11 12:54:57 ==========================capability start==========================
2021-08-11 12:54:57 board num = 3
2021-08-11 12:54:57 board id = 0, chain num = 1
2021-08-11 12:54:57 chain id = 0
2021-08-11 12:54:57 board id = 1, chain num = 1
2021-08-11 12:54:57 chain id = 1
2021-08-11 12:54:57 board id = 2, chain num = 1
2021-08-11 12:54:57 chain id = 2
2021-08-11 12:54:57 ==========================capability end============================
2021-08-11 12:54:57 chain num = 3
2021-08-11 12:54:59 load chain 0 eeprom data
2021-08-11 12:54:59 board_info_version = 4
2021-08-11 12:54:59 algorithm_and_key_version = 0x11
2021-08-11 12:54:59 board_sn = YDFTYN3BAJEAG0EXK
2021-08-11 12:54:59 chip_die = ED
2021-08-11 12:54:59 chip_marking = S1C021AU09
2021-08-11 12:54:59 chip_bin = 5
2021-08-11 12:54:59 ft_version = F1V04B2C1
2021-08-11 12:54:59 pcb_version = 0x100
2021-08-11 12:54:59 bom_version = 0x10
2021-08-11 12:54:59 asic_sensor_type = 0x0
2021-08-11 12:54:59 asic_sensor_addr[0] = 0x0
2021-08-11 12:54:59 asic_sensor_addr[1] = 0x0
2021-08-11 12:54:59 asic_sensor_addr[2] = 0x0
2021-08-11 12:54:59 asic_sensor_addr[3] = 0x0
2021-08-11 12:54:59 pic_sensor_type = 0x81
2021-08-11 12:54:59 pic_sensor_addr = 0x1
2021-08-11 12:54:59 chip_tech = AA
2021-08-11 12:54:59 board_name = BHB42601
2021-08-11 12:54:59 factory_job = YDFT20210517002-ZB
2021-08-11 12:54:59 board_info_crc = 0x16
2021-08-11 12:54:59 voltage = 1320
2021-08-11 12:54:59 frequency = 505
2021-08-11 12:54:59 nonce_rate = 9977
2021-08-11 12:54:59 pcb_temp_in = 35
2021-08-11 12:54:59 pcb_temp_out = 38
2021-08-11 12:54:59 test_version = 1
2021-08-11 12:54:59 test_standard = 0
2021-08-11 12:54:59 param_info_crc = 0xe
2021-08-11 12:54:59 pt1_result = 1
2021-08-11 12:54:59 pt1_count = 1
2021-08-11 12:54:59 pt2_result = 1
2021-08-11 12:54:59 pt2_count = 1
2021-08-11 12:55:01 load chain 1 eeprom data
2021-08-11 12:55:01 board_info_version = 4
2021-08-11 12:55:01 algorithm_and_key_version = 0x11
2021-08-11 12:55:01 board_sn = YDFTYN3BAJEAG0EX8
2021-08-11 12:55:01 chip_die = ED
2021-08-11 12:55:01 chip_marking = S1CT21AY34
2021-08-11 12:55:01 chip_bin = 5
2021-08-11 12:55:01 ft_version = F1V04B2C1
2021-08-11 12:55:01 pcb_version = 0x100
2021-08-11 12:55:01 bom_version = 0x10
2021-08-11 12:55:01 asic_sensor_type = 0x0
2021-08-11 12:55:01 asic_sensor_addr[0] = 0x0
2021-08-11 12:55:01 asic_sensor_addr[1] = 0x0
2021-08-11 12:55:01 asic_sensor_addr[2] = 0x0
2021-08-11 12:55:01 asic_sensor_addr[3] = 0x0
2021-08-11 12:55:01 pic_sensor_type = 0x81
2021-08-11 12:55:01 pic_sensor_addr = 0x1
2021-08-11 12:55:01 chip_tech = AA
2021-08-11 12:55:01 board_name = BHB42601
2021-08-11 12:55:01 factory_job = YDFT20210517002-ZB
2021-08-11 12:55:01 board_info_crc = 0xe
2021-08-11 12:55:01 voltage = 1320
2021-08-11 12:55:01 frequency = 505
2021-08-11 12:55:01 nonce_rate = 9967
2021-08-11 12:55:01 pcb_temp_in = 33
2021-08-11 12:55:01 pcb_temp_out = 34
2021-08-11 12:55:01 test_version = 1
2021-08-11 12:55:01 test_standard = 0
2021-08-11 12:55:01 param_info_crc = 0xd
2021-08-11 12:55:01 pt1_result = 1
2021-08-11 12:55:01 pt1_count = 1
2021-08-11 12:55:01 pt2_result = 1
2021-08-11 12:55:01 pt2_count = 1
2021-08-11 12:55:03 load chain 2 eeprom data
2021-08-11 12:55:03 board_info_version = 4
2021-08-11 12:55:03 algorithm_and_key_version = 0x11
2021-08-11 12:55:03 board_sn = YDFTYN3BAJEAG0EWL
2021-08-11 12:55:03 chip_die = ED
2021-08-11 12:55:03 chip_marking = S1CT21AY34
2021-08-11 12:55:03 chip_bin = 5
2021-08-11 12:55:03 ft_version = F1V04B2C1
2021-08-11 12:55:03 pcb_version = 0x100
2021-08-11 12:55:03 bom_version = 0x10
2021-08-11 12:55:03 asic_sensor_type = 0x0
2021-08-11 12:55:03 asic_sensor_addr[0] = 0x0
2021-08-11 12:55:03 asic_sensor_addr[1] = 0x0
2021-08-11 12:55:03 asic_sensor_addr[2] = 0x0
2021-08-11 12:55:03 asic_sensor_addr[3] = 0x0
2021-08-11 12:55:03 pic_sensor_type = 0x81
2021-08-11 12:55:03 pic_sensor_addr = 0x1
2021-08-11 12:55:03 chip_tech = AA
2021-08-11 12:55:03 board_name = BHB42601
2021-08-11 12:55:03 factory_job = YDFT20210517002-ZB
2021-08-11 12:55:03 board_info_crc = 0xd
2021-08-11 12:55:03 voltage = 1320
2021-08-11 12:55:03 frequency = 505
2021-08-11 12:55:03 nonce_rate = 9982
2021-08-11 12:55:03 pcb_temp_in = 33
2021-08-11 12:55:03 pcb_temp_out = 34
2021-08-11 12:55:03 test_version = 1
2021-08-11 12:55:03 test_standard = 0
2021-08-11 12:55:03 param_info_crc = 0x9
2021-08-11 12:55:03 pt1_result = 1
2021-08-11 12:55:03 pt1_count = 1
2021-08-11 12:55:03 pt2_result = 1
2021-08-11 12:55:03 pt2_count = 1
2021-08-11 12:55:03 fan_eft : 0 fan_pwm : 100
2021-08-11 12:55:03 create thread get_nonce_and_register_thread
2021-08-11 12:55:03 fixed working voltage = 1320
2021-08-11 12:55:03 Chain [0] PCB Version: 0x0100
2021-08-11 12:55:03 Chain [0] BOM Version: 0x0010
2021-08-11 12:55:03 Chain [1] PCB Version: 0x0100
2021-08-11 12:55:03 Chain [1] BOM Version: 0x0010
2021-08-11 12:55:03 Chain [2] PCB Version: 0x0100
2021-08-11 12:55:03 Chain [2] BOM Version: 0x0010
2021-08-11 12:55:07 Fan check passed.
2021-08-11 12:55:08 chain[0] PIC jump to app
2021-08-11 12:55:09 Check chain[0] PIC fw version=0x89
2021-08-11 12:55:10 chain[1] PIC jump to app
2021-08-11 12:55:12 Check chain[1] PIC fw version=0x89
2021-08-11 12:55:13 chain[2] PIC jump to app
2021-08-11 12:55:14 Check chain[2] PIC fw version=0x89
2021-08-11 12:55:15 create thread pic_heart_beat_thread
2021-08-11 12:55:15 max sensor num = 4
2021-08-11 12:55:15 temperature_monitor_thread start...
2021-08-11 12:55:19 power type version: 0x0071
2021-08-11 12:55:19 Enter sleep to make sure power release finish.
2021-08-11 12:58:20 Slept 180 seconds, diff = 6.
2021-08-11 12:58:22 set_voltage_by_steps to 1500.
2021-08-11 12:58:27 start up min temp by 75a = 30
2021-08-11 12:58:27 set UART baud to 115200
2021-08-11 12:58:34 chain avg vol rise to 15.23
2021-08-11 12:58:38 Chain[0]: find 126 asic, times 0
2021-08-11 12:58:48 Chain[1]: find 126 asic, times 0
2021-08-11 12:58:58 Chain[2]: find 126 asic, times 0
2021-08-11 12:59:03 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-08-11 12:59:07 min freq in eeprom = 505
2021-08-11 12:59:07 fixed frequency is 505
2021-08-11 12:59:07 Bring up temperature is 32
2021-08-11 12:59:07 set UART baud to 12000000
2021-08-11 12:59:08 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-08-11 12:59:08 start do_core_reset
2021-08-11 12:59:29 end do_core_reset
2021-08-11 12:59:29 STATUS_INITED: soc init done!
2021-08-11 12:59:29 create thread check_miner_status_thread
2021-08-11 12:59:29 create thread check_system_work_thread
2021-08-11 12:59:32 start to init...
2021-08-11 12:59:32 set_voltage_by_steps to 1450.
2021-08-11 12:59:34 fixed step freq_start = 50, freq_end = 505, freq_step = 6.25
2021-08-11 12:59:34 chain = 0 set freq to 56.25
2021-08-11 12:59:34 chain = 1 set freq to 56.25
2021-08-11 12:59:34 chain = 2 set freq to 56.25
2021-08-11 12:59:34 chain = 0 set freq to 62.50
2021-08-11 12:59:34 chain = 1 set freq to 62.50
2021-08-11 12:59:34 chain = 2 set freq to 62.50
2021-08-11 12:59:34 chain = 0 set freq to 68.75
2021-08-11 12:59:34 chain = 1 set freq to 68.75
2021-08-11 12:59:34 chain = 2 set freq to 68.75
2021-08-11 12:59:34 chain = 0 set freq to 75.00
2021-08-11 12:59:34 chain = 1 set freq to 75.00
2021-08-11 12:59:34 chain = 2 set freq to 75.00
2021-08-11 12:59:34 chain = 0 set freq to 81.25
2021-08-11 12:59:34 chain = 1 set freq to 81.25
2021-08-11 12:59:34 chain = 2 set freq to 81.25
2021-08-11 12:59:34 chain = 0 set freq to 87.50
2021-08-11 12:59:34 chain = 1 set freq to 87.50
2021-08-11 12:59:34 chain = 2 set freq to 87.50
2021-08-11 12:59:35 chain = 0 set freq to 93.75
2021-08-11 12:59:35 chain = 1 set freq to 93.75
2021-08-11 12:59:35 chain = 2 set freq to 93.75
2021-08-11 12:59:35 chain = 0 set freq to 100.00
2021-08-11 12:59:35 chain = 1 set freq to 100.00
2021-08-11 12:59:35 chain = 2 set freq to 100.00
2021-08-11 12:59:35 chain = 0 set freq to 106.25
2021-08-11 12:59:35 chain = 1 set freq to 106.25
2021-08-11 12:59:35 chain = 2 set freq to 106.25
2021-08-11 12:59:35 chain = 0 set freq to 112.50
2021-08-11 12:59:35 chain = 1 set freq to 112.50
2021-08-11 12:59:35 chain = 2 set freq to 112.50
2021-08-11 12:59:35 chain = 0 set freq to 118.75
2021-08-11 12:59:35 chain = 1 set freq to 118.75
2021-08-11 12:59:35 chain = 2 set freq to 118.75
2021-08-11 12:59:35 chain = 0 set freq to 125.00
2021-08-11 12:59:35 chain = 1 set freq to 125.00
2021-08-11 12:59:35 chain = 2 set freq to 125.00
2021-08-11 12:59:35 chain = 0 set freq to 131.25
2021-08-11 12:59:35 chain = 1 set freq to 131.25
2021-08-11 12:59:35 chain = 2 set freq to 131.25
2021-08-11 12:59:35 chain = 0 set freq to 137.50
2021-08-11 12:59:35 chain = 1 set freq to 137.50
2021-08-11 12:59:35 chain = 2 set freq to 137.50
2021-08-11 12:59:35 chain = 0 set freq to 143.75
2021-08-11 12:59:35 chain = 1 set freq to 143.75
2021-08-11 12:59:35 chain = 2 set freq to 143.75
2021-08-11 12:59:35 chain = 0 set freq to 150.00
2021-08-11 12:59:36 chain = 1 set freq to 150.00
2021-08-11 12:59:36 chain = 2 set freq to 150.00
2021-08-11 12:59:36 chain = 0 set freq to 156.25
2021-08-11 12:59:36 chain = 1 set freq to 156.25
2021-08-11 12:59:36 chain = 2 set freq to 156.25
2021-08-11 12:59:36 chain = 0 set freq to 162.50
2021-08-11 12:59:36 chain = 1 set freq to 162.50
2021-08-11 12:59:36 chain = 2 set freq to 162.50
2021-08-11 12:59:36 chain = 0 set freq to 168.75
2021-08-11 12:59:36 chain = 1 set freq to 168.75
2021-08-11 12:59:36 chain = 2 set freq to 168.75
2021-08-11 12:59:36 chain = 0 set freq to 175.00
2021-08-11 12:59:36 chain = 1 set freq to 175.00
2021-08-11 12:59:36 chain = 2 set freq to 175.00
2021-08-11 12:59:36 chain = 0 set freq to 181.25
2021-08-11 12:59:36 chain = 1 set freq to 181.25
2021-08-11 12:59:36 chain = 2 set freq to 181.25
2021-08-11 12:59:36 chain = 0 set freq to 187.50
2021-08-11 12:59:36 chain = 1 set freq to 187.50
2021-08-11 12:59:36 chain = 2 set freq to 187.50
2021-08-11 12:59:36 chain = 0 set freq to 193.75
2021-08-11 12:59:36 chain = 1 set freq to 193.75
2021-08-11 12:59:36 chain = 2 set freq to 193.75
2021-08-11 12:59:36 chain = 0 set freq to 200.00
2021-08-11 12:59:36 chain = 1 set freq to 200.00
2021-08-11 12:59:36 chain = 2 set freq to 200.00
2021-08-11 12:59:36 chain = 0 set freq to 206.25
2021-08-11 12:59:36 chain = 1 set freq to 206.25
2021-08-11 12:59:36 chain = 2 set freq to 206.25
2021-08-11 12:59:37 chain = 0 set freq to 212.50
2021-08-11 12:59:37 chain = 1 set freq to 212.50
2021-08-11 12:59:37 chain = 2 set freq to 212.50
2021-08-11 12:59:37 chain = 0 set freq to 218.75
2021-08-11 12:59:37 chain = 1 set freq to 218.75
2021-08-11 12:59:37 chain = 2 set freq to 218.75
2021-08-11 12:59:37 chain = 0 set freq to 225.00
2021-08-11 12:59:37 chain = 1 set freq to 225.00
2021-08-11 12:59:37 chain = 2 set freq to 225.00
2021-08-11 12:59:37 chain = 0 set freq to 231.25
2021-08-11 12:59:37 chain = 1 set freq to 231.25
2021-08-11 12:59:37 chain = 2 set freq to 231.25
2021-08-11 12:59:37 chain = 0 set freq to 237.50
2021-08-11 12:59:37 chain = 1 set freq to 237.50
2021-08-11 12:59:37 chain = 2 set freq to 237.50
2021-08-11 12:59:37 chain = 0 set freq to 243.75
2021-08-11 12:59:37 chain = 1 set freq to 243.75
2021-08-11 12:59:37 chain = 2 set freq to 243.75
2021-08-11 12:59:37 chain = 0 set freq to 250.00
2021-08-11 12:59:37 chain = 1 set freq to 250.00
2021-08-11 12:59:37 chain = 2 set freq to 250.00
2021-08-11 12:59:37 chain = 0 set freq to 256.25
2021-08-11 12:59:37 chain = 1 set freq to 256.25
2021-08-11 12:59:37 chain = 2 set freq to 256.25
2021-08-11 12:59:37 chain = 0 set freq to 262.50
2021-08-11 12:59:37 chain = 1 set freq to 262.50
2021-08-11 12:59:37 chain = 2 set freq to 262.50
2021-08-11 12:59:37 chain = 0 set freq to 268.75
2021-08-11 12:59:37 chain = 1 set freq to 268.75
2021-08-11 12:59:37 chain = 2 set freq to 268.75
2021-08-11 12:59:38 chain = 0 set freq to 275.00
2021-08-11 12:59:38 chain = 1 set freq to 275.00
2021-08-11 12:59:38 chain = 2 set freq to 275.00
2021-08-11 12:59:38 chain = 0 set freq to 281.25
2021-08-11 12:59:38 chain = 1 set freq to 281.25
2021-08-11 12:59:38 chain = 2 set freq to 281.25
2021-08-11 12:59:38 chain = 0 set freq to 287.50
2021-08-11 12:59:38 chain = 1 set freq to 287.50
2021-08-11 12:59:38 chain = 2 set freq to 287.50
2021-08-11 12:59:38 chain = 0 set freq to 293.75
2021-08-11 12:59:38 chain = 1 set freq to 293.75
2021-08-11 12:59:38 chain = 2 set freq to 293.75
2021-08-11 12:59:38 chain = 0 set freq to 300.00
2021-08-11 12:59:38 chain = 1 set freq to 300.00
2021-08-11 12:59:38 chain = 2 set freq to 300.00
2021-08-11 12:59:38 chain = 0 set freq to 306.25
2021-08-11 12:59:38 chain = 1 set freq to 306.25
2021-08-11 12:59:38 chain = 2 set freq to 306.25
2021-08-11 12:59:38 chain = 0 set freq to 312.50
2021-08-11 12:59:38 chain = 1 set freq to 312.50
2021-08-11 12:59:38 chain = 2 set freq to 312.50
2021-08-11 12:59:38 chain = 0 set freq to 318.75
2021-08-11 12:59:38 chain = 1 set freq to 318.75
2021-08-11 12:59:38 chain = 2 set freq to 318.75
2021-08-11 12:59:38 chain = 0 set freq to 325.00
2021-08-11 12:59:38 chain = 1 set freq to 325.00
2021-08-11 12:59:38 chain = 2 set freq to 325.00
2021-08-11 12:59:39 chain = 0 set freq to 331.25
2021-08-11 12:59:39 chain = 1 set freq to 331.25
2021-08-11 12:59:39 chain = 2 set freq to 331.25
2021-08-11 12:59:39 chain = 0 set freq to 337.50
2021-08-11 12:59:39 chain = 1 set freq to 337.50
2021-08-11 12:59:39 chain = 2 set freq to 337.50
2021-08-11 12:59:39 chain = 0 set freq to 343.75
2021-08-11 12:59:39 chain = 1 set freq to 343.75
2021-08-11 12:59:39 chain = 2 set freq to 343.75
2021-08-11 12:59:39 chain = 0 set freq to 350.00
2021-08-11 12:59:39 chain = 1 set freq to 350.00
2021-08-11 12:59:39 chain = 2 set freq to 350.00
2021-08-11 12:59:39 chain = 0 set freq to 356.25
2021-08-11 12:59:39 chain = 1 set freq to 356.25
2021-08-11 12:59:39 chain = 2 set freq to 356.25
2021-08-11 12:59:39 chain = 0 set freq to 362.50
2021-08-11 12:59:39 chain = 1 set freq to 362.50
2021-08-11 12:59:39 chain = 2 set freq to 362.50
2021-08-11 12:59:39 chain = 0 set freq to 368.75
2021-08-11 12:59:39 chain = 1 set freq to 368.75
2021-08-11 12:59:39 chain = 2 set freq to 368.75
2021-08-11 12:59:39 chain = 0 set freq to 375.00
2021-08-11 12:59:39 chain = 1 set freq to 375.00
2021-08-11 12:59:39 chain = 2 set freq to 375.00
2021-08-11 12:59:39 chain = 0 set freq to 381.25
2021-08-11 12:59:39 chain = 1 set freq to 381.25
2021-08-11 12:59:39 chain = 2 set freq to 381.25
2021-08-11 12:59:39 chain = 0 set freq to 387.50
2021-08-11 12:59:39 chain = 1 set freq to 387.50
2021-08-11 12:59:39 chain = 2 set freq to 387.50
2021-08-11 12:59:40 chain = 0 set freq to 393.75
2021-08-11 12:59:40 chain = 1 set freq to 393.75
2021-08-11 12:59:40 chain = 2 set freq to 393.75
2021-08-11 12:59:40 chain = 0 set freq to 400.00
2021-08-11 12:59:40 chain = 1 set freq to 400.00
2021-08-11 12:59:40 chain = 2 set freq to 400.00
2021-08-11 12:59:40 chain = 0 set freq to 406.25
2021-08-11 12:59:40 chain = 1 set freq to 406.25
2021-08-11 12:59:40 chain = 2 set freq to 406.25
2021-08-11 12:59:40 chain = 0 set freq to 412.50
2021-08-11 12:59:40 chain = 1 set freq to 412.50
2021-08-11 12:59:40 chain = 2 set freq to 412.50
2021-08-11 12:59:40 chain = 0 set freq to 418.75
2021-08-11 12:59:40 chain = 1 set freq to 418.75
2021-08-11 12:59:40 chain = 2 set freq to 418.75
2021-08-11 12:59:40 chain = 0 set freq to 425.00
2021-08-11 12:59:40 chain = 1 set freq to 425.00
2021-08-11 12:59:40 chain = 2 set freq to 425.00
2021-08-11 12:59:40 chain = 0 set freq to 431.25
2021-08-11 12:59:40 chain = 1 set freq to 431.25
2021-08-11 12:59:40 chain = 2 set freq to 431.25
2021-08-11 12:59:40 chain = 0 set freq to 437.50
2021-08-11 12:59:40 chain = 1 set freq to 437.50
2021-08-11 12:59:40 chain = 2 set freq to 437.50
2021-08-11 12:59:40 chain = 0 set freq to 443.75
2021-08-11 12:59:40 chain = 1 set freq to 443.75
2021-08-11 12:59:40 chain = 2 set freq to 443.75
2021-08-11 12:59:40 chain = 0 set freq to 450.00
2021-08-11 12:59:40 chain = 1 set freq to 450.00
2021-08-11 12:59:40 chain = 2 set freq to 450.00
2021-08-11 12:59:41 chain = 0 set freq to 456.25
2021-08-11 12:59:41 chain = 1 set freq to 456.25
2021-08-11 12:59:41 chain = 2 set freq to 456.25
2021-08-11 12:59:41 chain = 0 set freq to 462.50
2021-08-11 12:59:41 chain = 1 set freq to 462.50
2021-08-11 12:59:41 chain = 2 set freq to 462.50
2021-08-11 12:59:41 chain = 0 set freq to 468.75
2021-08-11 12:59:41 chain = 1 set freq to 468.75
2021-08-11 12:59:41 chain = 2 set freq to 468.75
2021-08-11 12:59:41 chain = 0 set freq to 475.00
2021

15 条评论

正式评论
Nick

2021年08月13日 06:40
Dear

Your log is incomplete. Can you send a complete kernel log after waiting for the machine to run longer, because the end of the kernel log will show what the fault is. Thank you for your cooperation and wait for your complete kernel log.
评论操作固定链接

Kadeem A

2021年08月13日 13:59

Hello Jessica!

Yes I can, I have attached the complete "Current log" and will post the historical log right after

Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209676K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19700K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e410   (9242 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
       .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6628K (cd480000 - cdaf9000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1285939732
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 755691A8-ABD6-4BFE-A950-439F3B8D2085, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 46785079
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 51B0F1D7-3BD2-4F4A-ADE8-8347ABAE84AB, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized


===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Sat May 15 21:17:18 CST 2021 type: Antminer S19j Pro
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Sat May 15 21:17:18 CST 2021 type: Antminer S19j Pro
1970-01-01 00:00:10 commit åversion: 46c2188 2021-05-15 21:14:17, build by: jenkins 2021-05-15 21:17:17
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine BHB42601 conf
1970-01-01 00:00:10 machine : BHB42601 
1970-01-01 00:00:10 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
2021-08-13 02:39:22 miner ID : 803295064e10481c
2021-08-13 02:39:22 FPGA Version = 0xB031
2021-08-13 02:39:22 HASH_ON_PLUG V9 = 0x7
2021-08-13 02:39:22 ==========================capability start==========================
2021-08-13 02:39:22 board num = 3
2021-08-13 02:39:22 board id = 0, chain num = 1
2021-08-13 02:39:22 	chain id = 0
2021-08-13 02:39:22 board id = 1, chain num = 1
2021-08-13 02:39:22 	chain id = 1
2021-08-13 02:39:22 board id = 2, chain num = 1
2021-08-13 02:39:22 	chain id = 2
2021-08-13 02:39:22 ==========================capability end============================
2021-08-13 02:39:22 chain num = 3
2021-08-13 02:39:23 load chain 0 eeprom data
2021-08-13 02:39:23 board_info_version = 4
2021-08-13 02:39:23 algorithm_and_key_version = 0x11
2021-08-13 02:39:23 board_sn = YDFTYN3BAJEAG0EXK
2021-08-13 02:39:23 chip_die = ED
2021-08-13 02:39:23 chip_marking = S1C021AU09
2021-08-13 02:39:23 chip_bin = 5
2021-08-13 02:39:23 ft_version = F1V04B2C1
2021-08-13 02:39:23 pcb_version = 0x100
2021-08-13 02:39:23 bom_version = 0x10
2021-08-13 02:39:23 asic_sensor_type = 0x0
2021-08-13 02:39:23 asic_sensor_addr[0] = 0x0
2021-08-13 02:39:23 asic_sensor_addr[1] = 0x0
2021-08-13 02:39:23 asic_sensor_addr[2] = 0x0
2021-08-13 02:39:23 asic_sensor_addr[3] = 0x0
2021-08-13 02:39:23 pic_sensor_type = 0x81
2021-08-13 02:39:23 pic_sensor_addr = 0x1
2021-08-13 02:39:23 chip_tech = AA
2021-08-13 02:39:23 board_name = BHB42601
2021-08-13 02:39:23 factory_job = YDFT20210517002-ZB
2021-08-13 02:39:23 board_info_crc = 0x16
2021-08-13 02:39:23 voltage = 1320
2021-08-13 02:39:23 frequency = 505
2021-08-13 02:39:23 nonce_rate = 9977
2021-08-13 02:39:23 pcb_temp_in = 35
2021-08-13 02:39:23 pcb_temp_out = 38
2021-08-13 02:39:23 test_version = 1
2021-08-13 02:39:23 test_standard = 0
2021-08-13 02:39:23 param_info_crc = 0xe
2021-08-13 02:39:23 pt1_result = 1
2021-08-13 02:39:23 pt1_count = 1
2021-08-13 02:39:23 pt2_result = 1
2021-08-13 02:39:23 pt2_count = 1
2021-08-13 02:39:25 load chain 1 eeprom data
2021-08-13 02:39:25 board_info_version = 4
2021-08-13 02:39:25 algorithm_and_key_version = 0x11
2021-08-13 02:39:25 board_sn = YDFTYN3BAJEAG0EX8
2021-08-13 02:39:25 chip_die = ED
2021-08-13 02:39:25 chip_marking = S1CT21AY34
2021-08-13 02:39:25 chip_bin = 5
2021-08-13 02:39:25 ft_version = F1V04B2C1
2021-08-13 02:39:25 pcb_version = 0x100
2021-08-13 02:39:25 bom_version = 0x10
2021-08-13 02:39:25 asic_sensor_type = 0x0
2021-08-13 02:39:25 asic_sensor_addr[0] = 0x0
2021-08-13 02:39:25 asic_sensor_addr[1] = 0x0
2021-08-13 02:39:25 asic_sensor_addr[2] = 0x0
2021-08-13 02:39:25 asic_sensor_addr[3] = 0x0
2021-08-13 02:39:25 pic_sensor_type = 0x81
2021-08-13 02:39:25 pic_sensor_addr = 0x1
2021-08-13 02:39:25 chip_tech = AA
2021-08-13 02:39:25 board_name = BHB42601
2021-08-13 02:39:25 factory_job = YDFT20210517002-ZB
2021-08-13 02:39:25 board_info_crc = 0xe
2021-08-13 02:39:25 voltage = 1320
2021-08-13 02:39:25 frequency = 505
2021-08-13 02:39:25 nonce_rate = 9967
2021-08-13 02:39:25 pcb_temp_in = 33
2021-08-13 02:39:25 pcb_temp_out = 34
2021-08-13 02:39:25 test_version = 1
2021-08-13 02:39:25 test_standard = 0
2021-08-13 02:39:25 param_info_crc = 0xd
2021-08-13 02:39:25 pt1_result = 1
2021-08-13 02:39:25 pt1_count = 1
2021-08-13 02:39:25 pt2_result = 1
2021-08-13 02:39:25 pt2_count = 1
2021-08-13 02:39:27 load chain 2 eeprom data
2021-08-13 02:39:27 board_info_version = 4
2021-08-13 02:39:27 algorithm_and_key_version = 0x11
2021-08-13 02:39:27 board_sn = YDFTYN3BAJEAG0EWL
2021-08-13 02:39:27 chip_die = ED
2021-08-13 02:39:27 chip_marking = S1CT21AY34
2021-08-13 02:39:27 chip_bin = 5
2021-08-13 02:39:27 ft_version = F1V04B2C1
2021-08-13 02:39:27 pcb_version = 0x100
2021-08-13 02:39:27 bom_version = 0x10
2021-08-13 02:39:27 asic_sensor_type = 0x0
2021-08-13 02:39:27 asic_sensor_addr[0] = 0x0
2021-08-13 02:39:27 asic_sensor_addr[1] = 0x0
2021-08-13 02:39:27 asic_sensor_addr[2] = 0x0
2021-08-13 02:39:27 asic_sensor_addr[3] = 0x0
2021-08-13 02:39:27 pic_sensor_type = 0x81
2021-08-13 02:39:27 pic_sensor_addr = 0x1
2021-08-13 02:39:27 chip_tech = AA
2021-08-13 02:39:27 board_name = BHB42601
2021-08-13 02:39:27 factory_job = YDFT20210517002-ZB
2021-08-13 02:39:27 board_info_crc = 0xd
2021-08-13 02:39:27 voltage = 1320
2021-08-13 02:39:27 frequency = 505
2021-08-13 02:39:27 nonce_rate = 9982
2021-08-13 02:39:27 pcb_temp_in = 33
2021-08-13 02:39:27 pcb_temp_out = 34
2021-08-13 02:39:27 test_version = 1
2021-08-13 02:39:27 test_standard = 0
2021-08-13 02:39:27 param_info_crc = 0x9
2021-08-13 02:39:27 pt1_result = 1
2021-08-13 02:39:27 pt1_count = 1
2021-08-13 02:39:27 pt2_result = 1
2021-08-13 02:39:27 pt2_count = 1
2021-08-13 02:39:27 fan_eft : 0  fan_pwm : 100
2021-08-13 02:39:27 create thread get_nonce_and_register_thread
2021-08-13 02:39:27 fixed working voltage = -1
2021-08-13 02:39:27 Chain [0] PCB Version: 0x0100
2021-08-13 02:39:27 Chain [0] BOM Version: 0x0010
2021-08-13 02:39:27 Chain [1] PCB Version: 0x0100
2021-08-13 02:39:27 Chain [1] BOM Version: 0x0010
2021-08-13 02:39:27 Chain [2] PCB Version: 0x0100
2021-08-13 02:39:27 Chain [2] BOM Version: 0x0010
2021-08-13 02:39:31 Fan check passed.
2021-08-13 02:39:32 chain[0] PIC jump to app
2021-08-13 02:39:33 Check chain[0] PIC fw version=0x89
2021-08-13 02:39:34 chain[1] PIC jump to app
2021-08-13 02:39:36 Check chain[1] PIC fw version=0x89
2021-08-13 02:39:37 chain[2] PIC jump to app
2021-08-13 02:39:39 Check chain[2] PIC fw version=0x89
2021-08-13 02:39:39 create thread pic_heart_beat_thread
2021-08-13 02:39:39 max sensor num = 4
2021-08-13 02:39:39 temperature_monitor_thread start...
2021-08-13 02:39:43 power type version: 0x0071
2021-08-13 02:39:43 Enter sleep to make sure power release finish.
2021-08-13 02:40:14 Slept 30 seconds, diff = 1.
2021-08-13 02:40:15 set_voltage_by_steps to 1500.
2021-08-13 02:40:20 start up min temp by 75a = 27
2021-08-13 02:40:21 set UART baud to 115200
2021-08-13 02:40:23 chain avg vol rise to 15.26
2021-08-13 02:40:31 Chain[0]: find 126 asic, times 0
2021-08-13 02:40:41 Chain[1]: find 126 asic, times 0
2021-08-13 02:40:51 Chain[2]: find 126 asic, times 0
2021-08-13 02:40:56 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-08-13 02:41:00 min freq in eeprom = 0
2021-08-13 02:41:00 failed to load freq in eeprom, using default
2021-08-13 02:41:00 fixed frequency is 200
2021-08-13 02:41:02 chain avg vol drop to 5.53
2021-08-13 02:41:03 Bring up temperature is 28
2021-08-13 02:41:03 set UART baud to 12000000
2021-08-13 02:41:04 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-08-13 02:41:04 start do_core_reset
2021-08-13 02:41:15 chain avg vol drop to 0.87
2021-08-13 02:41:25 end do_core_reset
2021-08-13 02:41:25 STATUS_INITED: soc init done!
2021-08-13 02:41:25 create thread check_miner_status_thread
2021-08-13 02:41:25 create thread check_system_work_thread
2021-08-13 02:41:28 start to init...
2021-08-13 02:41:28 set_voltage_by_steps to 1450.
2021-08-13 02:41:30 fixed step freq_start = 50, freq_end = 200, freq_step = 6.25
2021-08-13 02:41:30 chain = 0 set freq to 56.25
2021-08-13 02:41:30 chain = 1 set freq to 56.25
2021-08-13 02:41:30 chain = 2 set freq to 56.25
2021-08-13 02:41:30 chain = 0 set freq to 62.50
2021-08-13 02:41:30 chain = 1 set freq to 62.50
2021-08-13 02:41:30 chain = 2 set freq to 62.50
2021-08-13 02:41:30 chain = 0 set freq to 68.75
2021-08-13 02:41:30 chain = 1 set freq to 68.75
2021-08-13 02:41:30 chain = 2 set freq to 68.75
2021-08-13 02:41:30 chain = 0 set freq to 75.00
2021-08-13 02:41:30 chain = 1 set freq to 75.00
2021-08-13 02:41:30 chain = 2 set freq to 75.00
2021-08-13 02:41:30 chain = 0 set freq to 81.25
2021-08-13 02:41:30 chain = 1 set freq to 81.25
2021-08-13 02:41:30 chain = 2 set freq to 81.25
2021-08-13 02:41:30 chain = 0 set freq to 87.50
2021-08-13 02:41:30 chain = 1 set freq to 87.50
2021-08-13 02:41:30 chain = 2 set freq to 87.50
2021-08-13 02:41:31 chain = 0 set freq to 93.75
2021-08-13 02:41:31 chain = 1 set freq to 93.75
2021-08-13 02:41:31 chain = 2 set freq to 93.75
2021-08-13 02:41:31 chain = 0 set freq to 100.00
2021-08-13 02:41:31 chain = 1 set freq to 100.00
2021-08-13 02:41:31 chain = 2 set freq to 100.00
2021-08-13 02:41:31 chain = 0 set freq to 106.25
2021-08-13 02:41:31 chain = 1 set freq to 106.25
2021-08-13 02:41:31 chain = 2 set freq to 106.25
2021-08-13 02:41:31 chain = 0 set freq to 112.50
2021-08-13 02:41:31 chain = 1 set freq to 112.50
2021-08-13 02:41:31 chain = 2 set freq to 112.50
2021-08-13 02:41:31 chain = 0 set freq to 118.75
2021-08-13 02:41:31 chain = 1 set freq to 118.75
2021-08-13 02:41:31 chain = 2 set freq to 118.75
2021-08-13 02:41:31 chain = 0 set freq to 125.00
2021-08-13 02:41:31 chain = 1 set freq to 125.00
2021-08-13 02:41:31 chain = 2 set freq to 125.00
2021-08-13 02:41:31 chain = 0 set freq to 131.25
2021-08-13 02:41:31 chain = 1 set freq to 131.25
2021-08-13 02:41:31 chain = 2 set freq to 131.25
2021-08-13 02:41:31 chain = 0 set freq to 137.50
2021-08-13 02:41:31 chain = 1 set freq to 137.50
2021-08-13 02:41:31 chain = 2 set freq to 137.50
2021-08-13 02:41:31 chain = 0 set freq to 143.75
2021-08-13 02:41:31 chain = 1 set freq to 143.75
2021-08-13 02:41:31 chain = 2 set freq to 143.75
2021-08-13 02:41:31 chain = 0 set freq to 150.00
2021-08-13 02:41:31 chain = 1 set freq to 150.00
2021-08-13 02:41:31 chain = 2 set freq to 150.00
2021-08-13 02:41:32 chain = 0 set freq to 156.25
2021-08-13 02:41:32 chain = 1 set freq to 156.25
2021-08-13 02:41:32 chain = 2 set freq to 156.25
2021-08-13 02:41:32 chain = 0 set freq to 162.50
2021-08-13 02:41:32 chain = 1 set freq to 162.50
2021-08-13 02:41:32 chain = 2 set freq to 162.50
2021-08-13 02:41:32 chain = 0 set freq to 168.75
2021-08-13 02:41:32 chain = 1 set freq to 168.75
2021-08-13 02:41:32 chain = 2 set freq to 168.75
2021-08-13 02:41:32 chain = 0 set freq to 175.00
2021-08-13 02:41:32 chain = 1 set freq to 175.00
2021-08-13 02:41:32 chain = 2 set freq to 175.00
2021-08-13 02:41:32 chain = 0 set freq to 181.25
2021-08-13 02:41:32 chain = 1 set freq to 181.25
2021-08-13 02:41:32 chain = 2 set freq to 181.25
2021-08-13 02:41:32 chain = 0 set freq to 187.50
2021-08-13 02:41:32 chain = 1 set freq to 187.50
2021-08-13 02:41:32 chain = 2 set freq to 187.50
2021-08-13 02:41:32 chain = 0 set freq to 193.75
2021-08-13 02:41:32 chain = 1 set freq to 193.75
2021-08-13 02:41:32 chain = 2 set freq to 193.75
2021-08-13 02:41:32 chain = 0 set freq to 200.00
2021-08-13 02:41:32 chain = 1 set freq to 200.00
2021-08-13 02:41:32 chain = 2 set freq to 200.00
2021-08-13 02:41:33 Init done!
2021-08-13 02:41:33 STATUS_OKAY
2021-08-13 02:41:33 start the cached job
2021-08-13 02:41:33 Version num 8
2021-08-13 02:41:33 Mask num 0xe000
2021-08-13 02:41:33 freq = 200, percent = 90, hcn = 13107, timeout = 943
2021-08-13 02:41:33 set_start_time_point total_tv_start_sys=149 total_tv_end_sys=150
2021-08-13 03:11:26 avg rate is lower than ideal rate, 0.00 in 32 mins
2021-08-13 03:11:26 30m avg rate is 0.00 in 32 mins
2021-08-13 03:41:27 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 03:41:27 30m avg rate is 0.00 in 30 mins
2021-08-13 04:11:29 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 04:11:29 30m avg rate is 0.00 in 30 mins
2021-08-13 04:41:31 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 04:41:31 30m avg rate is 0.00 in 30 mins
2021-08-13 05:11:32 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 05:11:32 30m avg rate is 0.00 in 30 mins
2021-08-13 05:41:34 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 05:41:34 30m avg rate is 0.00 in 30 mins
2021-08-13 06:11:36 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 06:11:36 30m avg rate is 0.00 in 30 mins
2021-08-13 06:41:38 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 06:41:38 30m avg rate is 0.00 in 30 mins
2021-08-13 07:11:39 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 07:11:39 30m avg rate is 0.00 in 30 mins
2021-08-13 07:41:41 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 07:41:41 30m avg rate is 0.00 in 30 mins
2021-08-13 08:11:43 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 08:11:43 30m avg rate is 0.00 in 30 mins
2021-08-13 08:41:44 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 08:41:44 30m avg rate is 0.00 in 30 mins
2021-08-13 09:11:46 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 09:11:46 30m avg rate is 0.00 in 30 mins
2021-08-13 09:41:48 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 09:41:48 30m avg rate is 0.00 in 30 mins
2021-08-13 10:11:50 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 10:11:50 30m avg rate is 0.00 in 30 mins
2021-08-13 10:41:51 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 10:41:51 30m avg rate is 0.00 in 30 mins
2021-08-13 11:11:53 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 11:11:53 30m avg rate is 0.00 in 30 mins
2021-08-13 11:41:55 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 11:41:55 30m avg rate is 0.00 in 30 mins
2021-08-13 12:11:57 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 12:11:57 30m avg rate is 0.00 in 30 mins
2021-08-13 12:41:58 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 12:41:58 30m avg rate is 0.00 in 30 mins
2021-08-13 13:12:00 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 13:12:00 30m avg rate is 0.00 in 30 mins
2021-08-13 13:42:02 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-13 13:42:02 30m avg rate is 0.00 in 30 mins

Kadeem A

2021年08月13日 14:02
I am unable to post the historical log here because it is too long but I can potentially email it to you if that works?

Thanks again for your help!
0

评论操作固定链接
Nick

2021年08月16日 09:50
Dear Kadeem A

There is no hashrate could you try to reboot it again to double check ?
0

评论操作固定链接
Kadeem A

2021年08月16日 10:13
I have rebooted and waited hours many times over now, as the miner had been down for several days now.

The miner Stopped working the second I did the firmware update from the service site it has not worked since no matter what I do. I would really like to try the SD card file flash like another poster that got theirs back and running
0

评论操作固定链接
Kadeem A

2021年08月16日 10:18

已编辑于
I will take a picture of the control board in the meantime but I’m pretty positive that it’s a firmware update problem it happened immediately after

can you send me the sd card software files so i can at least try flashing it back to original software/firmware?
0

评论操作固定链接
Kadeem A

2021年08月16日 10:45
picture of baseboard so can determine which sd card file I need:
0

评论操作固定链接
Nick

2021年08月17日 08:45
Dear

Okay I know it , could you advise your email address, we will send the SD card to you .
0

评论操作固定链接

Kadeem A

2021年08月19日 23:16
已编辑于

received the file!

Unfortunately the error persist. I have sent additional logs to Lisa (bitmain email support). As you can see in the log post below, the miner will not load eeprom frequency, it keeps defaulting to low value of 200. In my earlier post (when it was still working) it continues to go through frequency band

2021-08-19 19:12:09 min freq in eeprom = 0
2021-08-19 19:12:09 failed to load freq in eeprom, using default
2021-08-19 19:12:09 fixed frequency is 200

Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209676K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19700K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e410   (9242 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
       .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6628K (cd480000 - cdaf9000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 8/3, WL threshold: 4096, image sequence number: 1285939732
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 755691A8-ABD6-4BFE-A950-439F3B8D2085, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 389151005
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID A96E3AB3-A4E1-47CE-A001-AE4E57E42F95, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized


===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Sat May 15 21:17:18 CST 2021 type: Antminer S19j Pro
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Sat May 15 21:17:18 CST 2021 type: Antminer S19j Pro
1970-01-01 00:00:10 commit åversion: 46c2188 2021-05-15 21:14:17, build by: jenkins 2021-05-15 21:17:17
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5700000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine BHB42601 conf
1970-01-01 00:00:10 machine : BHB42601 
1970-01-01 00:00:10 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
1970-01-01 00:00:16 miner ID : 803295064e10481c
1970-01-01 00:00:16 FPGA Version = 0xB031
1970-01-01 00:00:16 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:16 ==========================capability start==========================
1970-01-01 00:00:16 board num = 3
1970-01-01 00:00:16 board id = 0, chain num = 1
1970-01-01 00:00:16 	chain id = 0
1970-01-01 00:00:16 board id = 1, chain num = 1
1970-01-01 00:00:16 	chain id = 1
1970-01-01 00:00:16 board id = 2, chain num = 1
1970-01-01 00:00:16 	chain id = 2
1970-01-01 00:00:16 ==========================capability end============================
1970-01-01 00:00:16 chain num = 3
1970-01-01 00:00:18 load chain 0 eeprom data
1970-01-01 00:00:18 board_info_version = 4
1970-01-01 00:00:18 algorithm_and_key_version = 0x11
1970-01-01 00:00:18 board_sn = YDFTYN3BAJEAG0EXK
1970-01-01 00:00:18 chip_die = ED
1970-01-01 00:00:18 chip_marking = S1C021AU09
1970-01-01 00:00:18 chip_bin = 5
1970-01-01 00:00:18 ft_version = F1V04B2C1
1970-01-01 00:00:18 pcb_version = 0x100
1970-01-01 00:00:18 bom_version = 0x10
1970-01-01 00:00:18 asic_sensor_type = 0x0
1970-01-01 00:00:18 asic_sensor_addr[0] = 0x0
1970-01-01 00:00:18 asic_sensor_addr[1] = 0x0
1970-01-01 00:00:18 asic_sensor_addr[2] = 0x0
1970-01-01 00:00:18 asic_sensor_addr[3] = 0x0
1970-01-01 00:00:18 pic_sensor_type = 0x81
1970-01-01 00:00:18 pic_sensor_addr = 0x1
1970-01-01 00:00:18 chip_tech = AA
1970-01-01 00:00:18 board_name = BHB42601
1970-01-01 00:00:18 factory_job = YDFT20210517002-ZB
1970-01-01 00:00:18 board_info_crc = 0x16
1970-01-01 00:00:18 voltage = 1320
1970-01-01 00:00:18 frequency = 505
1970-01-01 00:00:18 nonce_rate = 9977
1970-01-01 00:00:18 pcb_temp_in = 35
1970-01-01 00:00:18 pcb_temp_out = 38
1970-01-01 00:00:18 test_version = 1
1970-01-01 00:00:18 test_standard = 0
1970-01-01 00:00:18 param_info_crc = 0xe
1970-01-01 00:00:18 pt1_result = 1
1970-01-01 00:00:18 pt1_count = 1
1970-01-01 00:00:18 pt2_result = 1
1970-01-01 00:00:18 pt2_count = 1
2021-08-19 19:10:34 load chain 1 eeprom data
2021-08-19 19:10:34 board_info_version = 4
2021-08-19 19:10:34 algorithm_and_key_version = 0x11
2021-08-19 19:10:34 board_sn = YDFTYN3BAJEAG0EX8
2021-08-19 19:10:34 chip_die = ED
2021-08-19 19:10:34 chip_marking = S1CT21AY34
2021-08-19 19:10:34 chip_bin = 5
2021-08-19 19:10:34 ft_version = F1V04B2C1
2021-08-19 19:10:34 pcb_version = 0x100
2021-08-19 19:10:34 bom_version = 0x10
2021-08-19 19:10:34 asic_sensor_type = 0x0
2021-08-19 19:10:34 asic_sensor_addr[0] = 0x0
2021-08-19 19:10:34 asic_sensor_addr[1] = 0x0
2021-08-19 19:10:34 asic_sensor_addr[2] = 0x0
2021-08-19 19:10:34 asic_sensor_addr[3] = 0x0
2021-08-19 19:10:34 pic_sensor_type = 0x81
2021-08-19 19:10:34 pic_sensor_addr = 0x1
2021-08-19 19:10:34 chip_tech = AA
2021-08-19 19:10:34 board_name = BHB42601
2021-08-19 19:10:34 factory_job = YDFT20210517002-ZB
2021-08-19 19:10:34 board_info_crc = 0xe
2021-08-19 19:10:34 voltage = 1320
2021-08-19 19:10:34 frequency = 505
2021-08-19 19:10:34 nonce_rate = 9967
2021-08-19 19:10:34 pcb_temp_in = 33
2021-08-19 19:10:34 pcb_temp_out = 34
2021-08-19 19:10:34 test_version = 1
2021-08-19 19:10:34 test_standard = 0
2021-08-19 19:10:34 param_info_crc = 0xd
2021-08-19 19:10:34 pt1_result = 1
2021-08-19 19:10:34 pt1_count = 1
2021-08-19 19:10:34 pt2_result = 1
2021-08-19 19:10:34 pt2_count = 1
2021-08-19 19:10:36 load chain 2 eeprom data
2021-08-19 19:10:36 board_info_version = 4
2021-08-19 19:10:36 algorithm_and_key_version = 0x11
2021-08-19 19:10:36 board_sn = YDFTYN3BAJEAG0EWL
2021-08-19 19:10:36 chip_die = ED
2021-08-19 19:10:36 chip_marking = S1CT21AY34
2021-08-19 19:10:36 chip_bin = 5
2021-08-19 19:10:36 ft_version = F1V04B2C1
2021-08-19 19:10:36 pcb_version = 0x100
2021-08-19 19:10:36 bom_version = 0x10
2021-08-19 19:10:36 asic_sensor_type = 0x0
2021-08-19 19:10:36 asic_sensor_addr[0] = 0x0
2021-08-19 19:10:36 asic_sensor_addr[1] = 0x0
2021-08-19 19:10:36 asic_sensor_addr[2] = 0x0
2021-08-19 19:10:36 asic_sensor_addr[3] = 0x0
2021-08-19 19:10:36 pic_sensor_type = 0x81
2021-08-19 19:10:36 pic_sensor_addr = 0x1
2021-08-19 19:10:36 chip_tech = AA
2021-08-19 19:10:36 board_name = BHB42601
2021-08-19 19:10:36 factory_job = YDFT20210517002-ZB
2021-08-19 19:10:36 board_info_crc = 0xd
2021-08-19 19:10:36 voltage = 1320
2021-08-19 19:10:36 frequency = 505
2021-08-19 19:10:36 nonce_rate = 9982
2021-08-19 19:10:36 pcb_temp_in = 33
2021-08-19 19:10:36 pcb_temp_out = 34
2021-08-19 19:10:36 test_version = 1
2021-08-19 19:10:36 test_standard = 0
2021-08-19 19:10:36 param_info_crc = 0x9
2021-08-19 19:10:36 pt1_result = 1
2021-08-19 19:10:36 pt1_count = 1
2021-08-19 19:10:36 pt2_result = 1
2021-08-19 19:10:36 pt2_count = 1
2021-08-19 19:10:36 fan_eft : 0  fan_pwm : 100
2021-08-19 19:10:36 create thread get_nonce_and_register_thread
2021-08-19 19:10:36 fixed working voltage = -1
2021-08-19 19:10:36 Chain [0] PCB Version: 0x0100
2021-08-19 19:10:36 Chain [0] BOM Version: 0x0010
2021-08-19 19:10:36 Chain [1] PCB Version: 0x0100
2021-08-19 19:10:36 Chain [1] BOM Version: 0x0010
2021-08-19 19:10:36 Chain [2] PCB Version: 0x0100
2021-08-19 19:10:36 Chain [2] BOM Version: 0x0010
2021-08-19 19:10:40 Fan check passed.
2021-08-19 19:10:41 chain[0] PIC jump to app
2021-08-19 19:10:42 Check chain[0] PIC fw version=0x89
2021-08-19 19:10:43 chain[1] PIC jump to app
2021-08-19 19:10:45 Check chain[1] PIC fw version=0x89
2021-08-19 19:10:46 chain[2] PIC jump to app
2021-08-19 19:10:47 Check chain[2] PIC fw version=0x89
2021-08-19 19:10:48 create thread pic_heart_beat_thread
2021-08-19 19:10:48 max sensor num = 4
2021-08-19 19:10:48 temperature_monitor_thread start...
2021-08-19 19:10:52 power type version: 0x0071
2021-08-19 19:10:52 Enter sleep to make sure power release finish.
2021-08-19 19:11:23 Slept 30 seconds, diff = 1.
2021-08-19 19:11:24 set_voltage_by_steps to 1500.
2021-08-19 19:11:29 start up min temp by 75a = 27
2021-08-19 19:11:29 set UART baud to 115200
2021-08-19 19:11:32 chain avg vol rise to 15.27
2021-08-19 19:11:39 Chain[0]: find 126 asic, times 0
2021-08-19 19:11:49 Chain[1]: find 126 asic, times 0
2021-08-19 19:11:59 Chain[2]: find 126 asic, times 0
2021-08-19 19:12:04 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-08-19 19:12:09 min freq in eeprom = 0
2021-08-19 19:12:09 failed to load freq in eeprom, using default
2021-08-19 19:12:09 fixed frequency is 200
2021-08-19 19:12:11 chain avg vol drop to 5.56
2021-08-19 19:12:12 Bring up temperature is 27
2021-08-19 19:12:12 set UART baud to 12000000
2021-08-19 19:12:12 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-08-19 19:12:12 start do_core_reset
2021-08-19 19:12:24 chain avg vol drop to 0.91
2021-08-19 19:12:33 end do_core_reset
2021-08-19 19:12:33 STATUS_INITED: soc init done!
2021-08-19 19:12:33 create thread check_miner_status_thread
2021-08-19 19:12:33 create thread check_system_work_thread
2021-08-19 19:12:35 start to init...
2021-08-19 19:12:35 set_voltage_by_steps to 1450.
2021-08-19 19:12:38 fixed step freq_start = 50, freq_end = 200, freq_step = 6.25
2021-08-19 19:12:38 chain = 0 set freq to 56.25
2021-08-19 19:12:38 chain = 1 set freq to 56.25
2021-08-19 19:12:38 chain = 2 set freq to 56.25
2021-08-19 19:12:38 chain = 0 set freq to 62.50
2021-08-19 19:12:38 chain = 1 set freq to 62.50
2021-08-19 19:12:38 chain = 2 set freq to 62.50
2021-08-19 19:12:38 chain = 0 set freq to 68.75
2021-08-19 19:12:38 chain = 1 set freq to 68.75
2021-08-19 19:12:38 chain = 2 set freq to 68.75
2021-08-19 19:12:38 chain = 0 set freq to 75.00
2021-08-19 19:12:38 chain = 1 set freq to 75.00
2021-08-19 19:12:38 chain = 2 set freq to 75.00
2021-08-19 19:12:38 chain = 0 set freq to 81.25
2021-08-19 19:12:38 chain = 1 set freq to 81.25
2021-08-19 19:12:38 chain = 2 set freq to 81.25
2021-08-19 19:12:38 chain = 0 set freq to 87.50
2021-08-19 19:12:38 chain = 1 set freq to 87.50
2021-08-19 19:12:38 chain = 2 set freq to 87.50
2021-08-19 19:12:38 chain = 0 set freq to 93.75
2021-08-19 19:12:38 chain = 1 set freq to 93.75
2021-08-19 19:12:38 chain = 2 set freq to 93.75
2021-08-19 19:12:38 chain = 0 set freq to 100.00
2021-08-19 19:12:38 chain = 1 set freq to 100.00
2021-08-19 19:12:38 chain = 2 set freq to 100.00
2021-08-19 19:12:38 chain = 0 set freq to 106.25
2021-08-19 19:12:38 chain = 1 set freq to 106.25
2021-08-19 19:12:38 chain = 2 set freq to 106.25
2021-08-19 19:12:39 chain = 0 set freq to 112.50
2021-08-19 19:12:39 chain = 1 set freq to 112.50
2021-08-19 19:12:39 chain = 2 set freq to 112.50
2021-08-19 19:12:39 chain = 0 set freq to 118.75
2021-08-19 19:12:39 chain = 1 set freq to 118.75
2021-08-19 19:12:39 chain = 2 set freq to 118.75
2021-08-19 19:12:39 chain = 0 set freq to 125.00
2021-08-19 19:12:39 chain = 1 set freq to 125.00
2021-08-19 19:12:39 chain = 2 set freq to 125.00
2021-08-19 19:12:39 chain = 0 set freq to 131.25
2021-08-19 19:12:39 chain = 1 set freq to 131.25
2021-08-19 19:12:39 chain = 2 set freq to 131.25
2021-08-19 19:12:39 chain = 0 set freq to 137.50
2021-08-19 19:12:39 chain = 1 set freq to 137.50
2021-08-19 19:12:39 chain = 2 set freq to 137.50
2021-08-19 19:12:39 chain = 0 set freq to 143.75
2021-08-19 19:12:39 chain = 1 set freq to 143.75
2021-08-19 19:12:39 chain = 2 set freq to 143.75
2021-08-19 19:12:39 chain = 0 set freq to 150.00
2021-08-19 19:12:39 chain = 1 set freq to 150.00
2021-08-19 19:12:39 chain = 2 set freq to 150.00
2021-08-19 19:12:39 chain = 0 set freq to 156.25
2021-08-19 19:12:39 chain = 1 set freq to 156.25
2021-08-19 19:12:39 chain = 2 set freq to 156.25
2021-08-19 19:12:39 chain = 0 set freq to 162.50
2021-08-19 19:12:39 chain = 1 set freq to 162.50
2021-08-19 19:12:39 chain = 2 set freq to 162.50
2021-08-19 19:12:39 chain = 0 set freq to 168.75
2021-08-19 19:12:39 chain = 1 set freq to 168.75
2021-08-19 19:12:39 chain = 2 set freq to 168.75
2021-08-19 19:12:40 chain = 0 set freq to 175.00
2021-08-19 19:12:40 chain = 1 set freq to 175.00
2021-08-19 19:12:40 chain = 2 set freq to 175.00
2021-08-19 19:12:40 chain = 0 set freq to 181.25
2021-08-19 19:12:40 chain = 1 set freq to 181.25
2021-08-19 19:12:40 chain = 2 set freq to 181.25
2021-08-19 19:12:40 chain = 0 set freq to 187.50
2021-08-19 19:12:40 chain = 1 set freq to 187.50
2021-08-19 19:12:40 chain = 2 set freq to 187.50
2021-08-19 19:12:40 chain = 0 set freq to 193.75
2021-08-19 19:12:40 chain = 1 set freq to 193.75
2021-08-19 19:12:40 chain = 2 set freq to 193.75
2021-08-19 19:12:40 chain = 0 set freq to 200.00
2021-08-19 19:12:40 chain = 1 set freq to 200.00
2021-08-19 19:12:40 chain = 2 set freq to 200.00
2021-08-19 19:12:41 Init done!
2021-08-19 19:12:41 STATUS_OKAY
2021-08-19 19:12:41 start the cached job
2021-08-19 19:12:41 Version num 8
2021-08-19 19:12:41 Mask num 0xe000
2021-08-19 19:12:41 freq = 200, percent = 90, hcn = 13107, timeout = 943
2021-08-19 19:12:41 set_start_time_point total_tv_start_sys=148 total_tv_end_sys=149
2021-08-19 19:42:34 avg rate is lower than ideal rate, 0.00 in 32 mins
2021-08-19 19:42:34 30m avg rate is 0.00 in 32 mins
2021-08-19 20:12:36 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-19 20:12:36 30m avg rate is 0.00 in 30 mins
2021-08-19 20:42:38 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-19 20:42:38 30m avg rate is 0.00 in 30 mins
2021-08-19 21:12:39 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-19 21:12:39 30m avg rate is 0.00 in 30 mins
2021-08-19 21:42:41 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-19 21:42:41 30m avg rate is 0.00 in 30 mins
2021-08-19 22:12:43 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-19 22:12:43 30m avg rate is 0.00 in 30 mins
2021-08-19 22:42:45 avg rate is lower than ideal rate, 0.00 in 30 mins
2021-08-19 22:42:45 30m avg rate is 0.00 in 30 mins

Nick

2021年08月24日 06:28
Dear

Could you reboot it to try ?
-1

评论操作固定链接
Kadeem A

2021年08月25日 04:47
already did, many times. Definitely not working. After updating to the firmware file my miner stopped working. After many request, I still have not received the correct firmware BIN file for my miner, please see my notes below:

I need the following firmware versions below currently:

Fri May 28 17:43:03 CST 2021 ( I am 100% certain this is the correct firmware I need to get my miner back and working) Please send As soon as possible

&

Fri Jun 4 12:33:07 (posted from another user, this a different version then what is posted on the official bitmain website

** To be extra clear.... when you look at my first logs from when my miner was first received and working, my firmware was dated:

1970-01-01 00:00:09 Miner compile time: Fri May 28 17:43:03 CST 2021 type: Antminer S19j Pro

You can confirm this by looking at the very first logs I ever posted
1

评论操作固定链接
Nick

2021年08月26日 07:57
Dear

We checked our Lisa are double checking it for you by email .she will let you how to do once available , thanks for your patience.
1

评论操作固定链接
Kadeem A

2021年08月28日 20:15
Hello Again,

Do you or Lisa have an estimate for how much longer it will take to receive the following firmware version: Fri May 28 17:43:03 CST 2021?

Really Eager to get the firmware file so I can get my miner back online.

Thanks!
1

评论操作固定链接
Nifty Frames

2021年10月06日 15:56
BEWARE!

DO NOT INSTALL the S19j Pro SD card recovery package. It has BRICKED our miner!
- Antminer-S19j-Pro-Release-sd2nand-zynq7007-20210605.zip (file size 26.87MB)
- S19j Pro SD firmware for 7007 control board only (published 2021-08-26)
This package is identical to the S19j package. We have compared and match both packages' "update.bmu" file checksums. Your miner will not be able to detect hash boards, reset to factory default firmware, or update to the Antminer-S19j-Pro-release-202106281212.bin firmware. Effectively rendering your equipment useless.

Bitmain support, please send the correct S19j Pro 100T (7007) recovery to niftyframes@protonmail.com
1

评论操作固定链接
Kadeem A

2021年10月06日 17:31
@niftyframes, do not get your hopes up regarding a response from Bitmain customer support. To this day I have yet to receive the firmware that came with my miner or helpful response from Bitmain support after two months of correspondence. I’ve only gotten the runaround from them, and recently no response at all. My S19J pro is currently on a shelf collecting dust because I cant get any help or firmware support from the manufacturer.

P.S Still waiting
0

评论操作固定链接

请先登录再写评论。

评论

BEWARE!

没有找到您要找的？