S19 Chipstate Abnormal

已回答

评论

8 条评论

  • 正式评论

    Dear

    Could you send us full kernel log after the miner running 20-30 mins , after double checked with technical engineer we will advise you the solutions and advice.

    Kernel log will always show the real reason issue for the antminer.

    https://support.bitmain.com/hc/en-us/articles/360016522253-How-to-copy-Kernel-Log-into-text-form

    评论操作 固定链接

    here you go.  I do not have an option for kernel log but just the current log.

    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090e410 (9242 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b3cda0 ( 244 kB)
    .bss : 0xc0b3cda0 - 0xc0b77024 ( 233 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 6632K (cd480000 - cdafa000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: disable subpage write
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: NAND_ECC_HW
    nand: NAND_ECC_HW_SYNDROME
    mtd->writesize = 2048
    ecc->strength = 1
    ecc->size = 2048
    mtd->writesize = 2048
    chip->ecc_strength_ds = 4
    chip->ecc_step_ds = 512
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    8 ofpart partitions found on MTD device pl35x-nand
    Creating 8 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000005200000 : "sig"
    0x000005200000-0x000006000000 : "reserve1"
    0x000006000000-0x000007000000 : "upgrade-ramfs"
    0x000007000000-0x00000a800000 : "upgrade-file"
    0x00000a800000-0x000010000000 : "reserve2"
    nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
    ip_tables: (C) 2000-2006 Netfilter Core Team
    NET: Registered protocol family 10
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
    devpts: called with bogus options
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 335058633
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
    ubi0: background thread "ubi_bgt0d" started, PID 729
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
    UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 483A3CCF-D63C-4E78-A452-EF19464728AD, small LPT model
    ubi2: attaching mtd4
    ubi2: scanning is finished
    ubi2: attached mtd4 (name "reserve1", size 14 MiB)
    ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
    ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi2: max/mean erase counter: 6/3, WL threshold: 4096, image sequence number: 1526344843
    ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
    ubi2: background thread "ubi_bgt2d" started, PID 740
    UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
    UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
    UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
    UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
    UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID B2BA18DD-A6C3-41A5-BD63-B53E2A7B64DB, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    random: avahi-daemon urandom read with 2 bits of entropy available
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfbc8000
    *base_vir_addr = 0xb031
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


    ===========================================Miner log===========================================
    1970-01-01 00:00:09 Invalid config option --bitmain-work-mode: '' is not a number
    1970-01-01 00:00:09 Invalid config option --bitmain-freq-level: '' is not a number
    1970-01-01 00:00:09 Miner compile time: Fri Dec 11 11:15:40 CST 2020 type: Antminer S19
    1970-01-01 00:00:10 This is fix-freq version
    1970-01-01 00:00:10 Miner compile time: Fri Dec 11 11:15:40 CST 2020 type: Antminer S19
    1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2020-12-11 11:28:32
    1970-01-01 00:00:10 opt_multi_version = 1
    1970-01-01 00:00:10 opt_bitmain_ab = 1
    1970-01-01 00:00:10 mid_auto_gen = 0
    1970-01-01 00:00:10 opt_bitmain_work_mode = 0
    1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5900000
    1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
    1970-01-01 00:00:10 Note: front fan is power on!
    1970-01-01 00:00:10 Note: rear fan is power on!
    1970-01-01 00:00:10 start the http log.
    1970-01-01 00:00:10 httpListenThread start ret=0
    1970-01-01 00:00:10 start listen on 6060 ...
    1970-01-01 00:00:10 load machine NBS1902 conf
    1970-01-01 00:00:10 machine : NBS1902
    1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2
    1970-01-01 00:00:16 miner ID : 804ccc063ce4285c
    1970-01-01 00:00:16 FPGA Version = 0xB031
    1970-01-01 00:00:16 HASH_ON_PLUG V9 = 0x7
    1970-01-01 00:00:16 ==========================capability start==========================
    1970-01-01 00:00:16 board num = 3
    1970-01-01 00:00:16 board id = 0, chain num = 1
    1970-01-01 00:00:16 chain id = 0
    1970-01-01 00:00:16 board id = 1, chain num = 1
    1970-01-01 00:00:16 chain id = 1
    1970-01-01 00:00:16 board id = 2, chain num = 1
    1970-01-01 00:00:16 chain id = 2
    1970-01-01 00:00:16 ==========================capability end============================
    1970-01-01 00:00:16 chain num = 3
    1970-01-01 00:00:18 [chain 0]
    1970-01-01 00:00:18 0x0000 11 4A 26 D4 80 D0 2F 3B 16 7E 35 A2 A7 F6 09 F2
    1970-01-01 00:00:18 0x0010 CC BD 27 A5 73 E6 06 86 B1 24 BC 92 2F B9 D1 4C
    1970-01-01 00:00:18 0x0020 EA EB 94 F1 05 5E 76 F3 33 08 82 1C C4 77 D2 4A
    1970-01-01 00:00:18 0x0030 3A 2C 69 EB 9A 4F 80 DF 51 9B 26 DB 68 82 15 54
    1970-01-01 00:00:18 0x0040 3E 96 60 2B 20 B5 B6 47 FA 9A FF FF FF FF FF FF
    1970-01-01 00:00:18 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
    1970-01-01 00:00:18
    1970-01-01 00:00:20 [chain 1]
    1970-01-01 00:00:20 0x0000 11 4A 64 22 66 80 D4 F4 1D 4D D7 6C 44 DC D6 06
    1970-01-01 00:00:20 0x0010 9F B3 B8 78 72 6A 0D D5 FF 1C 45 5C 30 81 46 50
    1970-01-01 00:00:20 0x0020 38 A1 61 33 1A F3 77 A0 49 E8 3C 18 26 3A CB 99
    1970-01-01 00:00:20 0x0030 72 BB 36 48 05 45 6B 84 7A 89 6B 46 1A 24 AB 0C
    1970-01-01 00:00:20 0x0040 30 E6 DF A1 6A 16 96 59 63 AE FF FF FF FF FF FF
    1970-01-01 00:00:20 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
    1970-01-01 00:00:20
    1970-01-01 00:00:22 [chain 2]
    1970-01-01 00:00:22 0x0000 11 4A FD 6F 86 50 B0 A0 42 0B A8 BE 2A B6 31 60
    1970-01-01 00:00:22 0x0010 BD D6 C8 C9 3D 1B 0C 53 AA B6 38 B8 D9 23 74 07
    1970-01-01 00:00:22 0x0020 85 62 99 69 F2 98 E5 1E 9E 4D E9 F3 C0 A5 DB 48
    1970-01-01 00:00:22 0x0030 27 9F 45 D5 F4 A0 0A 73 8C 70 F8 D2 86 54 5A 1A
    1970-01-01 00:00:22 0x0040 23 88 7E 0B B1 6C BF 98 A5 C0 FF FF FF FF FF FF
    1970-01-01 00:00:22 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
    1970-01-01 00:00:22
    1970-01-01 00:00:22 fan_eft : 0 fan_pwm : 100
    1970-01-01 00:00:22 create thread
    1970-01-01 00:00:22 fixed working voltage = 1380
    1970-01-01 00:00:22 Chain [0] PCB Version: 0x011e
    1970-01-01 00:00:22 Chain [0] BOM Version: 0x0100
    1970-01-01 00:00:22 Chain [1] PCB Version: 0x011e
    1970-01-01 00:00:22 Chain [1] BOM Version: 0x0100
    1970-01-01 00:00:22 Chain [2] PCB Version: 0x011e
    1970-01-01 00:00:22 Chain [2] BOM Version: 0x0100
    2021-07-23 12:47:11 Fan check passed.
    2021-07-23 12:47:12 chain[0] PIC jump to app
    2021-07-23 12:47:13 Check chain[0] PIC fw version=0x89
    2021-07-23 12:47:14 chain[1] PIC jump to app
    2021-07-23 12:47:16 Check chain[1] PIC fw version=0x89
    2021-07-23 12:47:17 chain[2] PIC jump to app
    2021-07-23 12:47:19 Check chain[2] PIC fw version=0x89
    2021-07-23 12:47:19 create thread
    2021-07-23 12:47:19 max sensor num = 4
    2021-07-23 12:47:19 temperature_monitor_thread start...
    2021-07-23 12:47:23 power type version: 0x0071
    2021-07-23 12:47:23 Enter sleep to make sure power release finish.
    2021-07-23 12:47:54 Slept 30 seconds, diff = 2.
    2021-07-23 12:47:54 set_voltage_by_steps to 1500.
    2021-07-23 12:47:59 start up min temp by 75a = 21
    2021-07-23 12:47:59 set UART baud to 115200
    2021-07-23 12:48:04 chain avg vol rise to 15.33
    2021-07-23 12:48:08 Chain[0]: find 76 asic, times 0
    2021-07-23 12:48:15 Chain[1]: find 76 asic, times 0
    2021-07-23 12:48:23 Chain[2]: find 76 asic, times 0
    2021-07-23 12:48:23 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 0
    2021-07-23 12:48:26 min freq in eeprom = 675
    2021-07-23 12:48:26 fixed frequency is 675
    2021-07-23 12:48:26 Bring up temperature is 22
    2021-07-23 12:48:26 set UART baud to 12000000
    2021-07-23 12:48:27 set_voltage_by_steps to 1380.
    2021-07-23 12:48:34 STATUS_INITED: soc init done!
    2021-07-23 12:48:34 create thread
    2021-07-23 12:48:34 create thread
    2021-07-23 12:51:59 freq_level = 0
    2021-07-23 12:52:07 reload pool, need recalculate
    2021-07-23 12:52:07 set_start_time_point total_tv_start_sys=323 total_tv_end_sys=324
    2021-07-23 12:52:47 start to init...
    2021-07-23 12:52:47 reload pool, need recalculate
    2021-07-23 12:52:47 set_start_time_point total_tv_start_sys=363 total_tv_end_sys=364
    2021-07-23 12:52:58 Init done!
    2021-07-23 12:52:58 STATUS_OKAY
    2021-07-23 12:52:58 start the cached job
    2021-07-23 12:52:58 Version num 8
    2021-07-23 12:52:58 Mask num 0xe000
    2021-07-23 12:52:58 freq = 675, percent = 90, hcn = 14560, timeout = 524
    2021-07-23 12:52:58 set_start_time_point total_tv_start_sys=373 total_tv_end_sys=374
    2021-07-23 14:41:23 reload pool, need recalculate
    2021-07-23 14:41:23 set_start_time_point total_tv_start_sys=6879 total_tv_end_sys=6880

     

    0
    评论操作 固定链接

    Dear

    The log is not finished. Can you let the machine run more time and provide a complete log to double check ,thanks.

    0
    评论操作 固定链接

    irtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090e410 (9242 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b3cda0 ( 244 kB)
    .bss : 0xc0b3cda0 - 0xc0b77024 ( 233 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 6632K (cd480000 - cdafa000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: disable subpage write
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: NAND_ECC_HW
    nand: NAND_ECC_HW_SYNDROME
    mtd->writesize = 2048
    ecc->strength = 1
    ecc->size = 2048
    mtd->writesize = 2048
    chip->ecc_strength_ds = 4
    chip->ecc_step_ds = 512
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    8 ofpart partitions found on MTD device pl35x-nand
    Creating 8 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000005200000 : "sig"
    0x000005200000-0x000006000000 : "reserve1"
    0x000006000000-0x000007000000 : "upgrade-ramfs"
    0x000007000000-0x00000a800000 : "upgrade-file"
    0x00000a800000-0x000010000000 : "reserve2"
    nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
    ip_tables: (C) 2000-2006 Netfilter Core Team
    NET: Registered protocol family 10
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
    devpts: called with bogus options
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 335058633
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
    ubi0: background thread "ubi_bgt0d" started, PID 729
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
    UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 483A3CCF-D63C-4E78-A452-EF19464728AD, small LPT model
    ubi2: attaching mtd4
    ubi2: scanning is finished
    ubi2: attached mtd4 (name "reserve1", size 14 MiB)
    ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
    ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi2: max/mean erase counter: 6/3, WL threshold: 4096, image sequence number: 1526344843
    ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
    ubi2: background thread "ubi_bgt2d" started, PID 740
    UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
    UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
    UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
    UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
    UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID B2BA18DD-A6C3-41A5-BD63-B53E2A7B64DB, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    random: avahi-daemon urandom read with 2 bits of entropy available
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfbc8000
    *base_vir_addr = 0xb031
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


    ===========================================Miner log===========================================
    1970-01-01 00:00:09 Invalid config option --bitmain-work-mode: '' is not a number
    1970-01-01 00:00:09 Invalid config option --bitmain-freq-level: '' is not a number
    1970-01-01 00:00:09 Miner compile time: Fri Dec 11 11:15:40 CST 2020 type: Antminer S19
    1970-01-01 00:00:10 This is fix-freq version
    1970-01-01 00:00:10 Miner compile time: Fri Dec 11 11:15:40 CST 2020 type: Antminer S19
    1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2020-12-11 11:28:32
    1970-01-01 00:00:10 opt_multi_version = 1
    1970-01-01 00:00:10 opt_bitmain_ab = 1
    1970-01-01 00:00:10 mid_auto_gen = 0
    1970-01-01 00:00:10 opt_bitmain_work_mode = 0
    1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5900000
    1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
    1970-01-01 00:00:10 Note: front fan is power on!
    1970-01-01 00:00:10 Note: rear fan is power on!
    1970-01-01 00:00:10 start the http log.
    1970-01-01 00:00:10 httpListenThread start ret=0
    1970-01-01 00:00:10 start listen on 6060 ...
    1970-01-01 00:00:10 load machine NBS1902 conf
    1970-01-01 00:00:10 machine : NBS1902
    1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2
    1970-01-01 00:00:16 miner ID : 804ccc063ce4285c
    1970-01-01 00:00:16 FPGA Version = 0xB031
    1970-01-01 00:00:16 HASH_ON_PLUG V9 = 0x7
    1970-01-01 00:00:16 ==========================capability start==========================
    1970-01-01 00:00:16 board num = 3
    1970-01-01 00:00:16 board id = 0, chain num = 1
    1970-01-01 00:00:16 chain id = 0
    1970-01-01 00:00:16 board id = 1, chain num = 1
    1970-01-01 00:00:16 chain id = 1
    1970-01-01 00:00:16 board id = 2, chain num = 1
    1970-01-01 00:00:16 chain id = 2
    1970-01-01 00:00:16 ==========================capability end============================
    1970-01-01 00:00:16 chain num = 3
    1970-01-01 00:00:18 [chain 0]
    1970-01-01 00:00:18 0x0000 11 4A 26 D4 80 D0 2F 3B 16 7E 35 A2 A7 F6 09 F2
    1970-01-01 00:00:18 0x0010 CC BD 27 A5 73 E6 06 86 B1 24 BC 92 2F B9 D1 4C
    1970-01-01 00:00:18 0x0020 EA EB 94 F1 05 5E 76 F3 33 08 82 1C C4 77 D2 4A
    1970-01-01 00:00:18 0x0030 3A 2C 69 EB 9A 4F 80 DF 51 9B 26 DB 68 82 15 54
    1970-01-01 00:00:18 0x0040 3E 96 60 2B 20 B5 B6 47 FA 9A FF FF FF FF FF FF
    1970-01-01 00:00:18 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:18 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
    1970-01-01 00:00:18
    1970-01-01 00:00:20 [chain 1]
    1970-01-01 00:00:20 0x0000 11 4A 64 22 66 80 D4 F4 1D 4D D7 6C 44 DC D6 06
    1970-01-01 00:00:20 0x0010 9F B3 B8 78 72 6A 0D D5 FF 1C 45 5C 30 81 46 50
    1970-01-01 00:00:20 0x0020 38 A1 61 33 1A F3 77 A0 49 E8 3C 18 26 3A CB 99
    1970-01-01 00:00:20 0x0030 72 BB 36 48 05 45 6B 84 7A 89 6B 46 1A 24 AB 0C
    1970-01-01 00:00:20 0x0040 30 E6 DF A1 6A 16 96 59 63 AE FF FF FF FF FF FF
    1970-01-01 00:00:20 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:20 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
    1970-01-01 00:00:20
    1970-01-01 00:00:22 [chain 2]
    1970-01-01 00:00:22 0x0000 11 4A FD 6F 86 50 B0 A0 42 0B A8 BE 2A B6 31 60
    1970-01-01 00:00:22 0x0010 BD D6 C8 C9 3D 1B 0C 53 AA B6 38 B8 D9 23 74 07
    1970-01-01 00:00:22 0x0020 85 62 99 69 F2 98 E5 1E 9E 4D E9 F3 C0 A5 DB 48
    1970-01-01 00:00:22 0x0030 27 9F 45 D5 F4 A0 0A 73 8C 70 F8 D2 86 54 5A 1A
    1970-01-01 00:00:22 0x0040 23 88 7E 0B B1 6C BF 98 A5 C0 FF FF FF FF FF FF
    1970-01-01 00:00:22 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    1970-01-01 00:00:22 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
    1970-01-01 00:00:22
    1970-01-01 00:00:22 fan_eft : 0 fan_pwm : 100
    1970-01-01 00:00:22 create thread
    1970-01-01 00:00:22 fixed working voltage = 1380
    1970-01-01 00:00:22 Chain [0] PCB Version: 0x011e
    1970-01-01 00:00:22 Chain [0] BOM Version: 0x0100
    1970-01-01 00:00:22 Chain [1] PCB Version: 0x011e
    1970-01-01 00:00:22 Chain [1] BOM Version: 0x0100
    1970-01-01 00:00:22 Chain [2] PCB Version: 0x011e
    1970-01-01 00:00:22 Chain [2] BOM Version: 0x0100
    2021-07-23 12:47:11 Fan check passed.
    2021-07-23 12:47:12 chain[0] PIC jump to app
    2021-07-23 12:47:13 Check chain[0] PIC fw version=0x89
    2021-07-23 12:47:14 chain[1] PIC jump to app
    2021-07-23 12:47:16 Check chain[1] PIC fw version=0x89
    2021-07-23 12:47:17 chain[2] PIC jump to app
    2021-07-23 12:47:19 Check chain[2] PIC fw version=0x89
    2021-07-23 12:47:19 create thread
    2021-07-23 12:47:19 max sensor num = 4
    2021-07-23 12:47:19 temperature_monitor_thread start...
    2021-07-23 12:47:23 power type version: 0x0071
    2021-07-23 12:47:23 Enter sleep to make sure power release finish.
    2021-07-23 12:47:54 Slept 30 seconds, diff = 2.
    2021-07-23 12:47:54 set_voltage_by_steps to 1500.
    2021-07-23 12:47:59 start up min temp by 75a = 21
    2021-07-23 12:47:59 set UART baud to 115200
    2021-07-23 12:48:04 chain avg vol rise to 15.33
    2021-07-23 12:48:08 Chain[0]: find 76 asic, times 0
    2021-07-23 12:48:15 Chain[1]: find 76 asic, times 0
    2021-07-23 12:48:23 Chain[2]: find 76 asic, times 0
    2021-07-23 12:48:23 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 0
    2021-07-23 12:48:26 min freq in eeprom = 675
    2021-07-23 12:48:26 fixed frequency is 675
    2021-07-23 12:48:26 Bring up temperature is 22
    2021-07-23 12:48:26 set UART baud to 12000000
    2021-07-23 12:48:27 set_voltage_by_steps to 1380.
    2021-07-23 12:48:34 STATUS_INITED: soc init done!
    2021-07-23 12:48:34 create thread
    2021-07-23 12:48:34 create thread
    2021-07-23 12:51:59 freq_level = 0
    2021-07-23 12:52:07 reload pool, need recalculate
    2021-07-23 12:52:07 set_start_time_point total_tv_start_sys=323 total_tv_end_sys=324
    2021-07-23 12:52:47 start to init...
    2021-07-23 12:52:47 reload pool, need recalculate
    2021-07-23 12:52:47 set_start_time_point total_tv_start_sys=363 total_tv_end_sys=364
    2021-07-23 12:52:58 Init done!
    2021-07-23 12:52:58 STATUS_OKAY
    2021-07-23 12:52:58 start the cached job
    2021-07-23 12:52:58 Version num 8
    2021-07-23 12:52:58 Mask num 0xe000
    2021-07-23 12:52:58 freq = 675, percent = 90, hcn = 14560, timeout = 524
    2021-07-23 12:52:58 set_start_time_point total_tv_start_sys=373 total_tv_end_sys=374
    2021-07-23 14:41:23 reload pool, need recalculate
    2021-07-23 14:41:23 set_start_time_point total_tv_start_sys=6879 total_tv_end_sys=6880
    2021-07-27 21:20:51 WARN_NET_LOST: network connection lost
    2021-07-27 21:20:51 will power off in 264 seconds in case not resume
    2021-07-27 21:21:45 network connection resume
    2021-07-27 21:21:45 STATUS_OKAY

    0
    评论操作 固定链接

    Dear

    It showed WARN_NET_LOST: network connection lost.

    Could you try the below ways to exclude them firstly ?

    1 Could you double check if your network is normal or not ?

    2 Change a network line to double check .

    3 Would you like to change a Router to double check it again ?

    0
    评论操作 固定链接

    Its not the cat6 cable or router.  I have many miners on the same switch.  The abnomal state is the chip card.

    0
    评论操作 固定链接

    Dear

    Yes, there is one ASIC is abnormal, please try to reset the miner to the factory setting to try ,

    https://support.bitmain.com/hc/en-us/articles/115003595387-How-to-reset-miner-to-factory-settings-

    Then advise us further news,

    0
    评论操作 固定链接

    has this been resolved Benny Chi ?

    0
    评论操作 固定链接

请先登录再写评论。