Antminer S19 Not Mining Even After Reset: Need Help

Meu Antminer S19 parou de minerar do nada! Eu realmente preciso de ajuda, pois não tenho ideia do que poderia ter acontecido ... Já reiniciei o dispositivo e até o restaurei para as configurações de fábrica, mas nada funcionou. O registro está abaixo:

[    0.000000@0] Booting Linux on physical CPU 0x0
[    0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Wed Aug 24 09:52:51 CST 2022
[    0.000000@0] Boot CPU: AArch64 Processor [410fd034]
[    0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')
[    0.000000@0] bootconsole [aml_uart0] enabled
[    0.000000@0] efi: Getting EFI parameters from FDT:
[    0.000000@0] efi: UEFI not found.
[    0.000000@0] 	07400000 - 07500000,     1024 KB, ramoops@0x07400000
[    0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[    0.000000@0] 	05000000 - 05400000,     4096 KB, linux,secmon
[    0.000000@0] cma: Reserved 16 MiB at 0x000000000f000000
[    0.000000@0] On node 0 totalpages: 65536
[    0.000000@0]   DMA zone: 1024 pages used for memmap
[    0.000000@0]   DMA zone: 0 pages reserved
[    0.000000@0]   DMA zone: 65536 pages, LIFO batch:15
[    0.000000@0] psci: probing for conduit method from DT.
[    0.000000@0] psci: PSCIv1.0 detected in firmware.
[    0.000000@0] psci: Using standard PSCI v0.2 function IDs
[    0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000@0] psci: SMC Calling Convention v1.1
[    0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00ef53000 s64536 r8192 d29672 u102400
[    0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096
[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000@0] Detected VIPT I-cache on CPU0
[    0.000000@0] CPU features: enabling workaround for ARM erratum 845719
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64512
[    0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs init=/sbin/init
[    0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)
[    0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.000000@0] Memory: 211692K/262144K available (8764K kernel code, 1194K rwdata, 2424K rodata, 3648K init, 1017K bss, 29972K reserved, 20480K cma-reserved)
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000@0]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
[    0.000000@0]       .text : 0xffffff8009080000 - 0xffffff8009910000   (  8768 KB)
[    0.000000@0]     .rodata : 0xffffff8009910000 - 0xffffff8009b80000   (  2496 KB)
[    0.000000@0]       .init : 0xffffff8009b80000 - 0xffffff8009f10000   (  3648 KB)
[    0.000000@0]       .data : 0xffffff8009f10000 - 0xffffff800a03aa00   (  1195 KB)
[    0.000000@0]        .bss : 0xffffff800a03aa00 - 0xffffff800a139034   (  1018 KB)
[    0.000000@0]     fixed   : 0xffffffbefe7fb000 - 0xffffffbefec00000   (  4116 KB)
[    0.000000@0]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
[    0.000000@0]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
[    0.000000@0]               0xffffffbf00000000 - 0xffffffbf00400000   (     4 MB actual)
[    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc010000000   (   256 MB)
[    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0] Preemptible hierarchical RCU implementation.
[    0.000000@0] 	Build-time adjustment of leaf fanout to 64.
[    0.000000@0] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000@0] NR_IRQS:64 nr_irqs:64 0
[    0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000@0] axg_aoclkc_init: register ao clk ok!
[    0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[    0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[    0.000000@0] axg_amlogic_init_media: register meson media clk
[    0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks
[    0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk
[    0.000000@0] axg_clkc_init initialization complete
[    0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008251@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194
[    0.016896@0] Console: colour dummy device 80x25
[    0.021106@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.031586@0] pid_max: default: 32768 minimum: 301
[    0.036435@0] thread_stack_cache_init, vmap:ffffffc00e5af600, bitmap:ffffffc00e5a3000, cache page:e5e0
[    0.045772@0] thread_stack_cache_init, allocation vm area:ffffffc00e5d94c0, addr:ffffff8020000000, size:20001000
[    0.056005@0] cpu 0, vmap_stack:[ffffffc00ef5c960-ffffffc00ef60950]
[    0.062304@0] cpu 0, irq_stack: [ffffffc00ef53060-ffffffc00ef57050]
[    0.068603@0] cpu 1, vmap_stack:[ffffffc00ef75960-ffffffc00ef79950]
[    0.074903@0] cpu 1, irq_stack: [ffffffc00ef6c060-ffffffc00ef70050]
[    0.081203@0] cpu 2, vmap_stack:[ffffffc00ef8e960-ffffffc00ef92950]
[    0.087503@0] cpu 2, irq_stack: [ffffffc00ef85060-ffffffc00ef89050]
[    0.093803@0] cpu 3, vmap_stack:[ffffffc00efa7960-ffffffc00efab950]
[    0.100103@0] cpu 3, irq_stack: [ffffffc00ef9e060-ffffffc00efa2050]
[    0.106463@0] Security Framework initialized
[    0.110695@0] SELinux:  Initializing.
[    0.114387@0] SELinux:  Starting in permissive mode
[    0.114424@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[    0.121107@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[    0.128837@0] ftrace: allocating 30061 entries in 118 pages
[    0.186846@0] sched-energy: CPU device node has no sched-energy-costs
[    0.187662@0] CPU0: update cpu_capacity 1024
[    0.191990@0] ASID allocator initialised with 32768 entries
[    0.230126@0] secmon: can't fine clear_range
[    0.230332@0] EFI services will not be available.
[    0.233594@0] Meson chip version = RevC (25:C - 23:0)
[    0.267272@1] Detected VIPT I-cache on CPU1
[    0.267332@1] CPU1: update cpu_capacity 1024
[    0.267334@1] CPU1: Booted secondary processor [410fd034]
[    0.295330@2] Detected VIPT I-cache on CPU2
[    0.295385@2] CPU2: update cpu_capacity 1024
[    0.295387@2] CPU2: Booted secondary processor [410fd034]
[    0.323392@3] Detected VIPT I-cache on CPU3
[    0.323442@3] CPU3: update cpu_capacity 1024
[    0.323444@3] CPU3: Booted secondary processor [410fd034]
[    0.323535@0] Brought up 4 CPUs
[    0.362757@0] SMP: Total of 4 processors activated.
[    0.367666@0] CPU features: detected feature: 32-bit EL0 Support
[    0.373702@0] CPU features: detected feature: Kernel page table isolation (KPTI)
[    0.384258@0] CPU: All CPU(s) started at EL2
[    0.385441@0] alternatives: patching kernel code
[    0.390750@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755
[    0.397968@0] devtmpfs: initialized
[    0.413002@0] DMI not present or invalid.
[    0.413412@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.421372@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.427943@0] pinctrl core: initialized pinctrl subsystem
[    0.434333@0] NET: Registered protocol family 16
[    0.457895@0] cpuidle: using governor menu
[    0.458399@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)
[    0.464005@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.
[    0.471420@0] DMA: preallocated 256 KiB pool for atomic allocations
[    0.477546@0] clkmsr: clkmsr: driver init
[    0.481610@0] aml_watch_point_probe, in, wp:2
[    0.487042@0] pstore: using zlib compression
[    0.490445@0] console [pstore-1] enabled
[    0.493885@0] pstore: Registered ramoops as persistent store backend
[    0.500292@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[    0.514648@0] aml_iomap: amlogic iomap probe done
[    0.521600@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c
[    0.523539@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[    0.620053@0] usbcore: registered new interface driver usbfs
[    0.620221@0] usbcore: registered new interface driver hub
[    0.625964@0] usbcore: registered new device driver usb
[    0.631154@0] pps_core: LinuxPPS API ver. 1 registered
[    0.636067@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.645458@0] PTP clock support registered
[    0.649780@0] dmi: Firmware registration failed.
[    0.654755@0] secmon: reserve_mem_size:0x300000
[    0.658797@0] secmon secmon: assigned reserved memory node linux,secmon
[    0.665722@0] secmon: get page:ffffffbf00140000, 5000
[    0.670425@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[    0.678828@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[    0.686699@0] NetLabel: Initializing
[    0.688863@0] NetLabel:  domain hash size = 128
[    0.693469@0] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.698682@0] NetLabel:  unlabeled traffic allowed by default
[    0.705322@0] clocksource: Switched to clocksource arch_sys_counter
[    0.832174@0] VFS: Disk quotas dquot_6.6.0
[    0.832322@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.858137@0] NET: Registered protocol family 2
[    0.859169@0] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.864389@0] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[    0.871047@0] TCP: Hash tables configured (established 2048 bind 2048)
[    0.877648@0] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.883598@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.890341@0] NET: Registered protocol family 1
[    0.895300@0] RPC: Registered named UNIX socket transport module.
[    0.900730@0] RPC: Registered udp transport module.
[    0.905610@0] RPC: Registered tcp transport module.
[    0.910507@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.919643@0] Unpacking initramfs...
[    1.420028@0] Initramfs unpacking failed: junk in compressed archive
[    1.426873@0] Freeing initrd memory: 6572K
[    1.427803@0] hw perfevents: clusterb_enabled = 0
[    1.430122@0] hw perfevents: cpumasks 0xf, 0x0
[    1.434596@0] hw perfevents: cluster A irq = 7
[    1.439167@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    1.449234@0] audit: initializing netlink subsys (disabled)
[    1.452665@0] audit: type=2000 audit(1.264:1): initialized
[    1.459954@0] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[    1.484062@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.487013@0] NFS: Registering the id_resolver key type
[    1.489777@0] Key type id_resolver registered
[    1.494088@0] Key type id_legacy registered
[    1.498755@0] fuse init (API version 7.26)
[    1.504126@0] SELinux:  Registering netfilter hooks
[    1.510320@0] NET: Registered protocol family 38
[    1.510381@0] Key type asymmetric registered
[    1.513627@0] Asymmetric key parser 'x509' registered
[    1.519109@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.526323@0] io scheduler noop registered (default)
[    1.531368@0] io scheduler deadline registered
[    1.536089@0] io scheduler cfq registered
[    1.556764@2] random: fast init done
[    1.556865@2] random: crng init done
[    1.557383@0] Unable to detect cache hierarchy for CPU 0
[    1.593818@0] loop: module loaded
[    1.599349@0] zram: Added device: zram0
[    1.599761@0] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.604616@0] libphy: Fixed MDIO Bus: probed
[    1.609397@0] tun: Universal TUN/TAP device driver, 1.6
[    1.613773@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.622023@0]  ee eth reset:Addr = ffffff80081fd008
[    1.629444@0] meson6-dwmac ff3f0000.ethernet: no reset control found
[    1.631415@0] stmmac - user ID: 0x11, Synopsys ID: 0x37
[    1.636686@0]  Ring mode enabled
[    1.639912@0]  DMA HW capability register supported
[    1.644644@0]  Normal descriptors
[    1.647960@0]  RX Checksum Offload Engine supported
[    1.652868@0] 	COE Type 2
[    1.655488@0]  TX Checksum insertion supported
[    1.659954@0]  Wake-Up On Lan supported
[    1.663891@0]  Enable RX Mitigation via HW Watchdog Timer
[    1.677430@0] libphy: stmmac: probed
[    1.677482@0] eth%d: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active
[    1.683913@0] PPP generic driver version 2.4.2
[    1.686974@0] PPP BSD Compression module registered
[    1.691427@0] PPP Deflate Compression module registered
[    1.696671@0] PPP MPPE Compression module registered
[    1.701645@0] NET: Registered protocol family 24
[    1.707124@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.713033@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.720076@0] usbcore: registered new interface driver cdc_acm
[    1.725289@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.733690@0] usbcore: registered new interface driver usbserial
[    1.740381@0] mousedev: PS/2 mouse device common for all mice
[    1.745835@0] usbcore: registered new interface driver xpad
[    1.751231@0] i2c /dev entries driver
[    1.756011@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[    1.760270@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[    1.771245@0] ff803000.serial: clock gate not found
[    1.772743@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000
[    1.779975@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart
[    1.794896@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[    1.797597@0] console [ttyS0] enabled
[    1.804825@0] bootconsole [aml_uart0] disabled
[    1.814455@3] ff804000.serial: clock gate not found
[    1.818623@3] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000
[    1.825714@3] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart
[    1.836053@2] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000
[    1.842227@2] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart
[    1.852389@0] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000
[    1.858686@0] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart
[    1.869692@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000
[    1.878929@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port
[    1.885452@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080
[    1.900417@1] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40
[    1.904270@1] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40
[    1.916605@1] aml_dma ff63e000.aml_dma: Aml dma
[    1.919789@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
[    1.924757@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
[    1.931111@1] efusekeynum: 4
[    1.933501@1] efusekeyname:             mac	offset:     0	size:     6
[    1.939890@1] efusekeyname:          mac_bt	offset:     6	size:     6
[    1.946291@1] efusekeyname:        mac_wifi	offset:    12	size:     6
[    1.952702@1] efusekeyname:            usid	offset:    18	size:    16
[    1.959525@3] efuse efuse: probe OK!
[    1.964992@3] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[    1.972233@0] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode 
[    1.977335@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[    1.982524@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[    2.029460@0] meson-mmc: meson_mmc_probe() : success!
[    2.029718@0] amlogic mtd driver init
[    2.033787@0] prase_get_dtb_nand_parameter:128,parse dts start
[    2.038535@0] bl mode descrete
[    2.041411@0] fip_copies 4
[    2.044076@0] fip_size 0x200000
[    2.047216@0] nand_clk_ctrl 0xffe07000
[    2.050939@0] prase_get_dtb_nand_parameter:234,parse dts end
[    2.056605@0] nand_clk_ctrl 0xffe07000
[    2.060328@0] nand register base ffffff80083df800, nand clock register ffffff80083e1000
[    2.069060@0] plat->aml_nand_device ffffff800a005c10
[    2.073236@0] m3_nand_probe() aml_nand_device ffffff800a005c10
[    2.079353@0] NAND device id: 2c da 90 95 6 0
[    2.083366@0] NAND device: Manufacturer ID: 
[    2.087429@0]  0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)
[    2.094472@0] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[    2.099905@0] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[    2.105454@0] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[    2.111699@0] mtd->oobavail: 0x8
[    2.115109@0] aml_nand_init 2119: plat-name:bootloader
[    2.120023@0] Creating 1 MTD partitions on "bootloader":
[    2.125322@0] 0x000000000000-0x000000200000 : "bootloader"
[    2.134633@2] bootloader initialized ok
[    2.134687@2] plat->aml_nand_device ffffff800a005c10
[    2.139560@2] m3_nand_probe() aml_nand_device ffffff800a005c10
[    2.145685@2] NAND device id: 2c da 90 95 6 0
[    2.149705@2] NAND device: Manufacturer ID: 
[    2.153733@2]  0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)
[    2.160775@2] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[    2.166207@2] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[    2.171759@2] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[    2.178001@2] mtd->oobavail: 0x8
[    2.181466@2] aml_nand_init 2119: plat-name:nandnormal
[    2.186361@2] bbt_start=20
[    2.188980@2] env_start=24
[    2.191685@2] key_start=32
[    2.194372@2] dtb_start=40
[    2.197039@2] ddr_start=44
[    2.199747@2] nbbt: info size=0x800 max_scan_blk=24, start_blk=20
[    2.206239@2] get_free_node 43: bitmap=0
[    2.209714@2] get_free_node 55: bitmap=1
[    2.213805@2] get_free_node 43: bitmap=1
[    2.217513@2] get_free_node 55: bitmap=3
[    2.221604@2] get_free_node 43: bitmap=3
[    2.225294@2] get_free_node 55: bitmap=7
[    2.229197@2] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1
[    2.235883@2] nbbt free list:
[    2.238831@2] blockN=21, ec=-1, dirty_flag=0
[    2.243077@2] blockN=22, ec=-1, dirty_flag=0
[    2.247323@2] blockN=23, ec=-1, dirty_flag=0
[    2.251571@2] aml_nand_scan_rsv_info 1141: page_num=1
[    2.256980@2] nbbt valid addr: 280000
[    2.260240@2] aml_nand_bbt_check 1306 bbt is valid, reading.
[    2.265873@2] aml_nand_read_rsv_info:423,read nbbt info at 280000
[    2.272133@2] nenv: info size=0x10000 max_scan_blk=32, start_blk=24
[    2.278561@2] get_free_node 43: bitmap=7
[    2.282079@2] get_free_node 55: bitmap=f
[    2.286171@2] get_free_node 43: bitmap=f
[    2.289879@2] get_free_node 55: bitmap=1f
[    2.294057@2] get_free_node 43: bitmap=1f
[    2.297852@2] get_free_node 55: bitmap=3f
[    2.302030@2] get_free_node 43: bitmap=3f
[    2.305825@2] get_free_node 55: bitmap=7f
[    2.310005@2] get_free_node 43: bitmap=7f
[    2.313799@2] get_free_node 55: bitmap=ff
[    2.317977@2] get_free_node 43: bitmap=ff
[    2.321772@2] get_free_node 55: bitmap=1ff
[    2.326037@2] get_free_node 43: bitmap=1ff
[    2.329919@2] get_free_node 55: bitmap=3ff
[    2.333992@2] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1
[    2.340663@2] nenv free list:
[    2.343611@2] blockN=25, ec=-1, dirty_flag=0
[    2.347857@2] blockN=26, ec=-1, dirty_flag=0
[    2.352104@2] blockN=27, ec=-1, dirty_flag=0
[    2.356351@2] blockN=28, ec=-1, dirty_flag=0
[    2.360597@2] blockN=29, ec=-1, dirty_flag=0
[    2.364844@2] blockN=30, ec=-1, dirty_flag=0
[    2.369090@2] blockN=31, ec=-1, dirty_flag=0
[    2.373337@2] aml_nand_scan_rsv_info 1141: page_num=32
[    2.390576@2] nenv valid addr: 310000
[    2.390610@2] nkey: info size=0x8000 max_scan_blk=40, start_blk=32
[    2.394997@2] get_free_node 43: bitmap=3ff
[    2.398854@2] get_free_node 55: bitmap=7ff
[    2.403118@2] get_free_node 43: bitmap=7ff
[    2.407000@2] get_free_node 55: bitmap=fff
[    2.411265@2] get_free_node 43: bitmap=fff
[    2.415147@2] get_free_node 55: bitmap=1fff
[    2.419498@2] get_free_node 43: bitmap=1fff
[    2.423467@2] get_free_node 55: bitmap=3fff
[    2.427818@2] get_free_node 43: bitmap=3fff
[    2.431787@2] get_free_node 55: bitmap=7fff
[    2.436139@2] get_free_node 43: bitmap=7fff
[    2.440107@2] get_free_node 55: bitmap=ffff
[    2.444458@2] get_free_node 43: bitmap=ffff
[    2.448427@2] get_free_node 55: bitmap=1ffff
[    2.452865@2] get_free_node 43: bitmap=1ffff
[    2.456921@2] get_free_node 55: bitmap=3ffff
[    2.461165@2] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[    2.467838@2] nkey free list:
[    2.470785@2] blockN=32, ec=-1, dirty_flag=0
[    2.475032@2] blockN=33, ec=-1, dirty_flag=0
[    2.479279@2] blockN=34, ec=-1, dirty_flag=0
[    2.483525@2] blockN=35, ec=-1, dirty_flag=0
[    2.487772@2] blockN=36, ec=-1, dirty_flag=0
[    2.492018@2] blockN=37, ec=-1, dirty_flag=0
[    2.496265@2] blockN=38, ec=-1, dirty_flag=0
[    2.500512@2] blockN=39, ec=-1, dirty_flag=0
[    2.504758@2] aml_nand_scan_rsv_info 1141: page_num=16
[    2.509872@2] nkey valid addr: fffffffffffe0000
[    2.514379@2] aml_nand_key_check 1251 NO key exist
[    2.519147@2] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40
[    2.525769@2] get_free_node 43: bitmap=3ffff
[    2.529634@2] get_free_node 55: bitmap=7ffff
[    2.534080@2] get_free_node 43: bitmap=7ffff
[    2.538128@2] get_free_node 55: bitmap=fffff
[    2.542565@2] get_free_node 43: bitmap=fffff
[    2.546621@2] get_free_node 55: bitmap=1fffff
[    2.550954@2] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1
[    2.557624@2] ndtb free list:
[    2.560555@2] blockN=41, ec=-1, dirty_flag=0
[    2.564819@2] blockN=42, ec=-1, dirty_flag=0
[    2.569065@2] blockN=43, ec=-1, dirty_flag=0
[    2.573322@2] aml_nand_scan_rsv_info 1141: page_num=64
[    2.590548@2] ndtb valid addr: 500000
[    2.590582@2] nddr: info size=0x20000 max_scan_blk=46, start_blk=44
[    2.595025@2] get_free_node 43: bitmap=1fffff
[    2.599167@2] get_free_node 55: bitmap=3fffff
[    2.603691@2] get_free_node 43: bitmap=3fffff
[    2.607833@2] get_free_node 55: bitmap=7fffff
[    2.612167@2] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[    2.618837@2] nddr free list:
[    2.621785@2] blockN=44, ec=-1, dirty_flag=0
[    2.626031@2] blockN=45, ec=-1, dirty_flag=0
[    2.630278@2] aml_nand_scan_rsv_info 1141: page_num=64
[    2.635391@2] nddr valid addr: fffffffffffe0000
[    2.639898@2] aml_nand_ddr_check 1281 NO ddr exist
[    2.644668@2] tpl: off 8388608, size 8388608
[    2.776524@2] Creating 6 MTD partitions on "nandnormal":
[    2.776571@2] 0x000000800000-0x000001000000 : "tpl"
[    2.788060@1] 0x000001000000-0x000001200000 : "misc"
[    2.791211@3] 0x000001200000-0x000002200000 : "recovery"
[    2.803247@2] 0x000002200000-0x000004200000 : "boot"
[    2.822501@2] 0x000004200000-0x000004700000 : "config"
[    2.827127@2] 0x000004700000-0x000010000000 : "nvdata"
[    2.927705@3] nandnormal initialized ok
[    2.927815@3] aml_ubootenv_init: register env chardev
[    2.931338@3] aml_ubootenv_init: register env chardev OK
[    2.936379@3] amlnf_dtb_init: register dtb cdev
[    2.941103@0] amlnf_dtb_init: register dtd cdev OK
[    2.945581@0] mtd_nand_probe 267 , err = 0
[    2.950765@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[    2.956108@3] input: aml_vkeypad as /devices/platform/rtc/input/input0
[    2.963090@0] unifykey: storage in base: 0xffffffc005000000
[    2.967730@0] unifykey: storage out base: 0xffffffc005040000
[    2.973359@0] unifykey: storage block base: 0xffffffc005080000
[    2.979151@0] unifykey: probe done!
[    2.983330@0] unifykey: no efuse-version set, use default value: -1
[    2.988869@0] unifykey: key unify config unifykey-num is 6
[    2.994414@0] unifykey: key unify fact unifykey-num is 6
[    2.999605@0] unifykey: unifykey_devno: f200000
[    3.004629@2] unifykey: device unifykeys created ok
[    3.009106@2] unifykey: aml_unifykeys_init done!
[    3.013986@2] sysled: module init
[    3.017451@2] meson_wdt ffd0f0d0.watchdog: start watchdog
[    3.022242@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[    3.029647@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[    3.038485@2] dmc_monitor_probe
[    3.052110@2] defendkey defendkey: Reserved memory is not enough!
[    3.052607@2] defendkey: probe of defendkey failed with error -22
[    3.059027@2] GACT probability NOT on
[    3.062350@2] Mirror/redirect action on
[    3.066131@2] u32 classifier
[    3.068958@2]     Actions configured
[    3.072545@2] Netfilter messages via NETLINK v0.30.
[    3.077824@2] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[    3.084004@2] ctnetlink v0.93: registering with nfnetlink.
[    3.089898@2] xt_time: kernel timezone is -0000
[    3.093597@2] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    3.100248@2] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.104948@2] arp_tables: arp_tables: (C) 2002 David S. Miller
[    3.110412@2] Initializing XFRM netlink socket
[    3.115926@2] NET: Registered protocol family 10
[    3.121655@2] mip6: Mobile IPv6
[    3.122482@2] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.128475@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.136416@2] NET: Registered protocol family 17
[    3.138745@2] NET: Registered protocol family 15
[    3.143319@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    3.156478@2] l2tp_core: L2TP core driver, V2.0
[    3.160874@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    3.165790@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    3.171545@2] l2tp_netlink: L2TP netlink interface
[    3.176358@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    3.182416@2] l2tp_debugfs: L2TP debugfs support
[    3.186936@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    3.193592@2] NET: Registered protocol family 35
[    3.198510@2] Key type dns_resolver registered
[    3.203105@2] Registered swp emulation handler
[    3.206972@2] Registered cp15_barrier emulation handler
[    3.212165@2] Registered setend emulation handler
[    3.216907@2] disable EAS feature
[    3.221613@1] registered taskstats version 1
[    3.238043@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[    3.744500@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.744590@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    3.752866@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010
[    3.761340@3] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000
[    3.768811@2] hub 1-0:1.0: USB hub found
[    3.771261@2] hub 1-0:1.0: 1 port detected
[    3.775882@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.780897@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    3.788793@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.798281@3] hub 2-0:1.0: USB hub found
[    3.800860@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    3.808190@3] usb usb2: Unsupported the hub
[    3.812919@3] aml_vrtc rtc: setting system clock to 2024-11-06 13:21:28 UTC (1730899288)
[    3.821015@3] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00d15f000)
[    3.821094@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[    3.828970@3] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000
[    3.828982@3] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00bb10000
[    3.929704@3] dwc_otg: Core Release: 3.10a
[    3.929760@3] dwc_otg: Setting default values for core params
[    3.933936@3] dwc_otg: curmode: 0, host_only: 0
[    3.938461@3] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[    3.950969@3] dwc_otg: Using Buffer DMA mode
[    3.951007@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    3.954911@3] dwc_otg: Working on port type = SLAVE
[    3.959767@3] dwc_otg: Dedicated Tx FIFOs mode
[    3.967095@3] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[    3.973483@3] cpucore_cooling_register, max_cpu_core_num:4
[    3.986129@3] gxbb_pm: enter meson_pm_probe!
[    3.986189@3] no vddio3v3_en pin
[    3.987835@3] pm-meson aml_pm: Can't get switch_clk81
[    3.992951@3] gxbb_pm: meson_pm_probe done
[    3.997914@3] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[    4.004221@3] Freeing unused kernel memory: 3648K
[    4.018386@3] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[    4.273669@0] ubi0: attaching mtd5
[    4.292151@0] ubi0: scanning is finished
[    4.296964@1] ubi0: attached mtd5 (name "config", size 5 MiB)
[    4.297095@1] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.304147@1] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    4.311071@1] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.318167@1] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0
[    4.324245@1] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    4.331601@1] ubi0: max/mean erase counter: 26/14, WL threshold: 4096, image sequence number: 3769936005
[    4.341055@1] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4
[    4.350260@0] ubi0: background thread "ubi_bgt0d" started, PID 1076
[    4.363136@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1080
[    4.398898@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
[    4.401289@2] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    4.411371@2] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[    4.421594@2] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB)
[    4.428171@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 2D3A66D6-5D72-4328-A999-7D7EAA02D750, small LPT model
[    4.452825@1] ubi2: attaching mtd6
[    5.126539@1] ubi2: scanning is finished
[    5.134040@3] ubi2: attached mtd6 (name "nvdata", size 185 MiB)
[    5.134340@3] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    5.141393@3] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    5.148321@3] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[    5.155410@3] ubi2: good PEBs: 1480, bad PEBs: 0, corrupted PEBs: 0
[    5.161658@3] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[    5.169018@3] ubi2: max/mean erase counter: 618/116, WL threshold: 4096, image sequence number: 2429647028
[    5.178644@3] ubi2: available PEBs: 0, total reserved PEBs: 1480, PEBs reserved for bad PEB handling: 4
[    5.188015@0] ubi2: background thread "ubi_bgt2d" started, PID 1088
[    5.201060@1] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1092
[    5.238229@2] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdada_log"
[    5.240525@2] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    5.250689@2] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs)
[    5.261435@2] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)
[    5.268187@2] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 930C9EAB-9F13-42CF-8C08-32006D2C2762, small LPT model
[    5.492712@3] eth0: device MAC address 02:c4:76:9e:49:79
[    5.573759@3] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[    5.575038@3] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.819040@1] uart_trans: loading out-of-tree module taints kernel.
[    5.821483@3] register uart_trans chrdev success.
[    5.824766@3] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600
[    5.832517@3] tty port open success [/dev/ttyS3]!
[    5.837150@3] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200
[    5.845562@3] init sucess for tty struct (246:3)  [/dev/ttyS3]
[    5.851664@3] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600
[    5.859387@3] tty port open success [/dev/ttyS2]!
[    5.863999@3] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200
[    5.872392@3] init sucess for tty struct (246:2)  [/dev/ttyS2]
[    5.878508@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[    5.886152@3] tty port open success [/dev/ttyS1]!
[    5.890855@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[    5.899234@3] init sucess for tty struct (246:1)  [/dev/ttyS1]
[    5.909561@3] create workqueue success!
[    7.609599@3] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    7.612879@3] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.089653@1] uart trans dev open.
[   19.089760@1] uart_buf virt addr = 0xffffffc00b580000
[   19.092465@1] uart_buf phys addr = 0x0b580000
[   19.096842@1] uart_buf pfn       = 0x0000b580
[   19.101506@1] uart trans stop send work timer.
[   19.105782@1] uart trans set chain exist bits:0x7.
[   19.110370@1] uart trans set work queue count 768.
[   74.095989@2] uart set baud to: 4098
[   74.096049@2] uart set baud to: 4098
[   74.097595@2] uart set baud to: 4098
[   87.206566@3] uart trans stop send work timer.
[  102.095103@0] uart trans start send work timer.


===========================================Miner log===========================================
2024-11-06 13:21:35 Open miner sn file /config/sn error
2024-11-06 13:21:35 Miner compile time: Wed Aug 24 09:34:49 CST 2022 type: Antminer BHB42XXX sn :
2024-11-06 13:21:36 This is fix-freq version
2024-11-06 13:21:36 Miner compile time: Wed Aug 24 09:34:49 CST 2022 type: Antminer BHB42XXX
2024-11-06 13:21:36 commit version: b5f3551 2022-08-23 21:03:25, build by: jenkins 2022-08-24 09:46:00
2024-11-06 13:21:36 opt_multi_version     = 1
2024-11-06 13:21:36 opt_bitmain_ab        = 1
2024-11-06 13:21:36 mid_auto_gen          = 1
2024-11-06 13:21:36 opt_bitmain_work_mode = 0
2024-11-06 13:21:36 port 439 already exported
2024-11-06 13:21:36 port 454 already exported
2024-11-06 13:21:36 port 440 already exported
2024-11-06 13:21:36 port 455 already exported
2024-11-06 13:21:36 port 441 already exported
2024-11-06 13:21:36 port 456 already exported
2024-11-06 13:21:36 port 438 already exported
2024-11-06 13:21:36 port 453 already exported
2024-11-06 13:21:36 port 446 already exported
2024-11-06 13:21:36 port 445 already exported
2024-11-06 13:21:36 Note: front fan is power on!
2024-11-06 13:21:36 Note: rear fan is power on!
2024-11-06 13:21:36 start the http log.
2024-11-06 13:21:36 httpListenThread start ret=0
2024-11-06 13:21:36 start listen on 6060 ...
2024-11-06 13:21:36 bad chain id = 3
2024-11-06 13:21:39 bad chain id = 3
2024-11-06 13:21:41 ==========================capability start==========================
2024-11-06 13:21:41 board num = 3
2024-11-06 13:21:41 board id = 0, chain num = 1
2024-11-06 13:21:41 	chain id = 0
2024-11-06 13:21:41 board id = 1, chain num = 1
2024-11-06 13:21:41 	chain id = 1
2024-11-06 13:21:41 board id = 2, chain num = 1
2024-11-06 13:21:41 	chain id = 2
2024-11-06 13:21:41 ==========================capability end============================
2024-11-06 13:21:41 chain num = 3
2024-11-06 13:21:41 skip loading levels for now
2024-11-06 13:21:42 load chain 0 eeprom data
2024-11-06 13:21:43 load chain 1 eeprom data
2024-11-06 13:21:43 load chain 2 eeprom data
2024-11-06 13:21:43 miner type: Antminer S19
2024-11-06 13:21:43 multi machine mode
2024-11-06 13:21:43 load machine BHB42841 conf
2024-11-06 13:21:43 machine : BHB42841 
2024-11-06 13:21:43 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
2024-11-06 13:21:43 fan_eft : 0  fan_pwm : 100
2024-11-06 13:21:43 create thread get_nonce_and_register_thread
2024-11-06 13:21:43 fixed working voltage = 1480
2024-11-06 13:21:43 min freq in eeprom = 475
2024-11-06 13:21:43 fixed frequency is 475
2024-11-06 13:21:43 Chain [0] PCB Version: 0x0130
2024-11-06 13:21:43 Chain [0] BOM Version: 0x0010
2024-11-06 13:21:43 Chain [1] PCB Version: 0x0130
2024-11-06 13:21:43 Chain [1] BOM Version: 0x0010
2024-11-06 13:21:43 Chain [2] PCB Version: 0x0130
2024-11-06 13:21:43 Chain [2] BOM Version: 0x0010
2024-11-06 13:21:43 bad chain id = 3
2024-11-06 13:21:43 Fan check passed.
2024-11-06 13:21:43 uart_trans addr:0xf7431000.
2024-11-06 13:21:43 max sensor num = 4
2024-11-06 13:21:43 STATUS_INITED: soc init done!
2024-11-06 13:21:43 temperature_monitor_thread start...
2024-11-06 13:21:46 start to init...
2024-11-06 13:21:46 i2c_sim_init start
2024-11-06 13:21:46 init gpio477
2024-11-06 13:21:46 init gpio476
2024-11-06 13:21:46 i2c_sim_init end
2024-11-06 13:21:48 power open power_version = 0x76
2024-11-06 13:21:50 power is not Calibrated
2024-11-06 13:21:50 warning:power is not calibration.
2024-11-06 13:21:52 power type version: 0x0076
2024-11-06 13:21:53 disable power watchdog: 0x0000
2024-11-06 13:21:54 Initializing the power, please wait, this may take up to 2 minutes...
2024-11-06 13:22:25 Slept 30 seconds, diff = 1.
2024-11-06 13:22:29 set_voltage_by_steps to 1500.
2024-11-06 13:22:38 start up min temp by 75a = 22
2024-11-06 13:22:41 Chain[0]: find 0 asic, times 0
2024-11-06 13:22:43 Chain[0]: find 0 asic, times 1
2024-11-06 13:22:44 Chain[0]: find 0 asic, times 2
2024-11-06 13:22:44 Chain 0 only find 0 asic, will power off hash board 0
2024-11-06 13:22:46 Chain[1]: find 126 asic, times 0
2024-11-06 13:22:48 Chain[2]: find 126 asic, times 0
2024-11-06 13:22:48 ERROR_SOC_INIT: soc init failed!
2024-11-06 13:22:48 stop_mining: soc init failed!
2024-11-06 13:22:48 uninit_temp_info
2024-11-06 13:22:48 do not read temp anymore...
2024-11-06 13:22:48 cancel thread
2024-11-06 13:22:48 ****power off hashboard****
2024-11-06 13:22:49 temp monitor thread exit
2024-11-06 13:23:06 Version num 65536
2024-11-06 13:23:06 Mask num 0x1fffe000
2024-11-06 13:23:06 opt_multi_version = 65536, interval timeout = 3255132
2024-11-06 13:23:06 freq = 475, percent = 90, hcn = 5518, timeout = 3255132