2 条评论

  • 正式评论

    Hi Onehemul!

    The picture you post here shows the miner status is good; hashrate is normal and the ASIC status displays all "o". Always check for the average hashrate and if that falls into a normal range, the miner is considered running well.

    The fault light may not be a reliable indicator to show the running status since it conveys different meanings. If you need to learn more about the signal lights, check this article for more information: https://support.bitmain.com/hc/en-us/articles/360018826774


    评论操作 固定链接

    The green light flashes, but near the word "fault". Attached photo. The inscription "normal" is at the top, near the red indicator.

    评论操作 固定链接