antminer s17e
-
As for the second device
Kernel Log
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 195688K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 33688K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 20648K (cc6d7000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 143/90, WL threshold: 4096, image sequence number: 2636279313
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A5E2E817-94FA-4998-90AB-D2C873A8EBA9, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 9170/7117, WL threshold: 4096, image sequence number: 614900815
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 91DF6B3D-1A99-4241-87C7-EB25097110C1, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb54000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
2024-06-28 10:19:28:thread.c:1555:create_bitmain_soc_init_thread: create thread
2024-06-28 10:19:28:driver-btm-api.c:682:init_freq_mode: This is scan-user version
2024-06-28 10:19:28:driver-btm-api.c:2518:bitmain_soc_init: Miner compile time: Fri Jan 8 22:31:06 CST 2021 type: Antminer S17e
2024-06-28 10:19:28:driver-btm-api.c:2519:bitmain_soc_init: commit version: 37668c9 2021-01-08 18:20:11, build by: jenkins 2021-01-08 22:35:52
2024-06-28 10:19:28:driver-btm-api.c:2520:bitmain_soc_init: opt_multi_version = 1
2024-06-28 10:19:28:driver-btm-api.c:2521:bitmain_soc_init: opt_bitmain_ab = 1
2024-06-28 10:19:28:driver-btm-api.c:2522:bitmain_soc_init: mid_auto_gen = 0
2024-06-28 10:19:28:driver-btm-api.c:2523:bitmain_soc_init: work_mode = 0
2024-06-28 10:19:28:driver-btm-api.c:2524:bitmain_soc_init: power_feedback_en = true
2024-06-28 10:19:28:driver-btm-api.c:2067:show_sn: no SN got, please write SN to /config/sn
2024-06-28 10:19:28:driver-btm-api.c:1384:miner_device_init: Detect 256MB control board of XILINX
2024-06-28 10:19:28:driver-btm-api.c:1325:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2024-06-28 10:19:34:driver-btm-api.c:1309:init_miner_version: miner ID : 81444c842b10481c
2024-06-28 10:19:34:driver-btm-api.c:1315:init_miner_version: FPGA Version = 0xB023
2024-06-28 10:19:40:auto_adapt.c:100:_get_board_info: chain[1] board bin: 1, chip bin: 2, chip ft: A4V4, chip version: AB
2024-06-28 10:19:40:auto_adapt.c:100:_get_board_info: chain[2] board bin: 1, chip bin: 1, chip ft: A4V4, chip version: AB
2024-06-28 10:19:40:auto_adapt.c:100:_get_board_info: chain[3] board bin: 1, chip bin: 2, chip ft: A4V4, chip version: AB
2024-06-28 10:19:40:driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
2024-06-28 10:19:40 voltage[1] = 1850
2024-06-28 10:19:40 voltage[2] = 1850
2024-06-28 10:19:40 voltage[3] = 1850
2024-06-28 10:19:40:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed
voltage_ref = 1850
2100 2100 2100 2100 2100 2100
2100 2100 2100 2100 2100 2100
2100 2100 2100 2100 2090 2050
2100 2090 2080 2060 2030 1960
2080 2060 2030 2010 1960 19102024-06-28 10:19:40:thread.c:1523:create_read_nonce_reg_thread: create thread
2024-06-28 10:19:40:driver-btm-api.c:698:dump_pcb_bom_version: Chain [1] PCB Version: 0x0128
2024-06-28 10:19:40:driver-btm-api.c:699:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2024-06-28 10:19:40:driver-btm-api.c:698:dump_pcb_bom_version: Chain [2] PCB Version: 0x0128
2024-06-28 10:19:40:driver-btm-api.c:699:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2024-06-28 10:19:40:driver-btm-api.c:698:dump_pcb_bom_version: Chain [3] PCB Version: 0x0128
2024-06-28 10:19:40:driver-btm-api.c:699:dump_pcb_bom_version: Chain [3] BOM Version: 0x0100
2024-06-28 10:19:46:driver-btm-api.c:2344:bitmain_board_init: Fan check passed.
2024-06-28 10:19:47:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2024-06-28 10:19:50:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2024-06-28 10:19:51:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2024-06-28 10:19:53:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2024-06-28 10:19:54:board.c:81:jump_and_app_check_restore_pic: chain[3] PIC jump to app
2024-06-28 10:19:56:board.c:94:jump_and_app_check_restore_pic: Check chain[3] PIC fw version=0xb9
2024-06-28 10:19:56:thread.c:1518:create_pic_heart_beat_thread: create thread
2024-06-28 10:19:57:power_api.c:241:power_init: power type version: 0x0042
2024-06-28 10:19:59:power_api.c:259:power_init: Power init:
2024-06-28 10:19:59:power_api.c:260:power_init: current_voltage_raw = 2136
2024-06-28 10:19:59:power_api.c:261:power_init: highest_voltage_raw = 2000
2024-06-28 10:19:59:power_api.c:262:power_init: working_voltage_raw = 1800
2024-06-28 10:19:59:power_api.c:263:power_init: higher_voltage_raw = 1850
2024-06-28 10:19:59:power_api.c:264:power_init: check_asic_voltage_raw = 1800
2024-06-28 10:19:59:driver-btm-api.c:2354:bitmain_board_init: Enter 60s sleep to make sure power release finish.
2024-06-28 10:21:01:driver-btm-api.c:1123:check_asic_number_until_volt_balance: THIS is No.1 time boost asic:
2024-06-28 10:21:01:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800
2024-06-28 10:21:04:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
2024-06-28 10:21:32:uart.c:69:set_baud: set UART baud to 115200
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 10:21:37:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2024-06-28 10:21:38:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2024-06-28 10:21:40:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 10:21:44:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2024-06-28 10:21:45:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2024-06-28 10:21:47:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 10:21:51:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2024-06-28 10:21:52:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2024-06-28 10:21:54:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 10:21:58:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 3
2024-06-28 10:21:59:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2024-06-28 10:22:01:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2024-06-28 10:22:01:driver-btm-api.c:1217:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 10:22:06:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 134 asic, times 0
2024-06-28 10:22:08:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2024-06-28 10:22:10:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 10:22:14:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 134 asic, times 1
2024-06-28 10:22:15:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2024-06-28 10:22:17:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 10:22:21:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 134 asic, times 2
2024-06-28 10:22:22:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2024-06-28 10:22:24:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 10:22:28:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 134 asic, times 3
2024-06-28 10:22:29:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2024-06-28 10:22:32:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2024-06-28 10:22:32:driver-btm-api.c:1217:check_asic_number: Chain 2 only find 134 asic, will power off hash board 2
chain 3, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 10:22:37:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[3]: find 135 asic, times 0
2024-06-28 10:22:37:driver-btm-api.c:1163:check_asic_number_until_volt_balance: PASS: volt balance at No.1 time boost asic.
2024-06-28 10:22:37:power_api.c:364:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step.
2024-06-28 10:22:59:driver-hash-chip.c:876:set_uart_relay: set uart relay to 0x390003
2024-06-28 10:22:59:driver-hash-chip.c:1264:set_ldo_ctrl: Set LDO to 0x2000203
2024-06-28 10:22:59:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 3 with 0 regs timeout.
chain 3 domain 0: d0 0.304, d1 0.310, d2 0.308, d3 0.300, sum = 1.222412
chain 3 domain 1: d0 0.329, d1 0.330, d2 0.335, d3 0.337, sum = 1.329915
chain 3 domain 2: d0 0.353, d1 0.359, d2 0.359, d3 0.358, sum = 1.428711
chain 3 domain 3: d0 0.323, d1 0.323, d2 0.330, d3 0.330, sum = 1.305583
chain 3 domain 4: d0 0.346, d1 0.349, d2 0.348, d3 0.349, sum = 1.392375
chain 3 domain 5: d0 0.324, d1 0.327, d2 0.330, d3 0.328, sum = 1.309163
chain 3 domain 6: d0 0.337, d1 0.340, d2 0.339, d3 0.338, sum = 1.354085
chain 3 domain 7: d0 0.320, d1 0.320, d2 0.321, d3 0.315, sum = 1.275472
chain 3 domain 8: d0 0.312, d1 0.317, d2 0.320, d3 0.321, sum = 1.270548
chain 3 domain 9: d0 0.335, d1 0.336, d2 0.335, d3 0.341, sum = 1.347778
chain 3 domain 10: d0 0.328, d1 0.334, d2 0.331, d3 0.330, sum = 1.323730
chain 3 domain 11: d0 0.319, d1 0.317, d2 0.317, d3 0.315, sum = 1.268066
chain 3 domain 12: d0 0.315, d1 0.319, d2 0.318, d3 0.314, sum = 1.266479
chain 3 domain 13: d0 0.336, d1 0.338, d2 0.337, d3 0.334, sum = 1.344849
chain 3 domain 14: d0 0.350, d1 0.349, d2 0.348, d3 0.349, sum = 1.395671
2024-06-28 10:22:59:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2024-06-28 10:23:01:temperature.c:272:calibrate_temp_sensor_one_chain: chain 3 temp sensor NCT218
2024-06-28 10:23:06:driver-btm-api.c:311:check_bringup_temp: Bring up temperature is 28
2024-06-28 10:23:06:uart.c:69:set_baud: set UART baud to 6000000
2024-06-28 10:23:07 voltage[3] = 1850
2024-06-28 10:23:07:power_api.c:272:set_working_voltage_raw: working_voltage_raw = 1850
2024-06-28 10:23:07:thread.c:1538:create_check_miner_status_thread: create thread
2024-06-28 10:23:07:thread.c:1528:create_show_miner_status_thread: create thread
2024-06-28 10:23:07:thread.c:1503:create_temperature_monitor_thread: create thread
2024-06-28 10:23:07:thread.c:1580:create_fan_monitor_thread: create thread
2024-06-28 10:23:07:frequency.c:578:inc_freq_with_fixed_vco: chain = 255, freq = 380, is_higher_voltage = true
2024-06-28 10:23:13:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 30, chip_temp 32 ~ 35, now 6.0s, target 35.0
2024-06-28 10:23:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 30, chip_temp 33 ~ 35, now 7.0s, target 35.2
2024-06-28 10:23:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 30, chip_temp 33 ~ 35, now 8.0s, target 35.3
2024-06-28 10:23:16:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 30, chip_temp 33 ~ 35, now 9.0s, target 35.5
2024-06-28 10:23:17:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 31, chip_temp 33 ~ 35, now 10.0s, target 35.7
2024-06-28 10:23:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 30, chip_temp 33 ~ 36, now 11.0s, target 35.8
2024-06-28 10:23:18:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 36 > 35.8 target_temp.
2024-06-28 10:23:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 31, chip_temp 33 ~ 36, now 17.0s, target 36.8
2024-06-28 10:23:25:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 32, chip_temp 34 ~ 37, now 18.0s, target 37.0
2024-06-28 10:23:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 32, chip_temp 34 ~ 37, now 19.0s, target 37.2
2024-06-28 10:23:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 31, chip_temp 34 ~ 37, now 20.0s, target 37.3
2024-06-28 10:23:28:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 31, chip_temp 34 ~ 38, now 21.0s, target 37.5
2024-06-28 10:23:28:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 38 > 37.5 target_temp.
2024-06-28 10:23:34:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 33, chip_temp 35 ~ 38, now 27.0s, target 38.5
2024-06-28 10:23:35:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 32, chip_temp 35 ~ 39, now 28.0s, target 38.7
2024-06-28 10:23:35:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 39 > 38.7 target_temp.
2024-06-28 10:23:41:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 33, chip_temp 35 ~ 39, now 34.0s, target 39.7
2024-06-28 10:23:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 33, chip_temp 36 ~ 40, now 35.0s, target 39.8
2024-06-28 10:23:42:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 40 > 39.8 target_temp.
2024-06-28 10:23:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 34, chip_temp 36 ~ 40, now 41.0s, target 40.8
2024-06-28 10:23:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 34, chip_temp 36 ~ 40, now 42.0s, target 41.0
2024-06-28 10:23:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 34, chip_temp 37 ~ 41, now 43.0s, target 41.2
2024-06-28 10:23:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 34, chip_temp 37 ~ 41, now 44.0s, target 41.3
2024-06-28 10:23:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 34, chip_temp 38 ~ 40, now 45.0s, target 41.5
2024-06-28 10:23:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 34, chip_temp 37 ~ 41, now 46.0s, target 41.7
2024-06-28 10:23:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 34, chip_temp 37 ~ 40, now 47.0s, target 41.8
2024-06-28 10:23:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 35, chip_temp 37 ~ 41, now 48.0s, target 42.0
2024-06-28 10:23:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 35, chip_temp 37 ~ 41, now 49.0s, target 42.2
2024-06-28 10:23:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 34, chip_temp 38 ~ 41, now 50.0s, target 42.3
2024-06-28 10:23:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 34, chip_temp 38 ~ 41, now 51.0s, target 42.5
2024-06-28 10:23:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 35, chip_temp 38 ~ 41, now 52.0s, target 42.7
2024-06-28 10:24:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 35, chip_temp 38 ~ 42, now 53.0s, target 42.8
2024-06-28 10:24:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 35, chip_temp 38 ~ 41, now 54.0s, target 43.0
2024-06-28 10:24:01:frequency.c:657:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 61
2024-06-28 10:24:01:frequency.c:665:inc_freq_with_fixed_vco: set to 61M, get pcb 33 ~ 35, chip_temp 38 ~ 41
2024-06-28 10:24:01:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2100, step by step.
2024-06-28 10:24:12:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:24:12:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 61 clock_counter_limit 6, no check, skip.
2024-06-28 10:24:20:frequency.c:623:inc_freq_with_fixed_vco: get pcb 35 ~ 36, chip_temp 41 ~ 43, now 73.1s, target 46.2
2024-06-28 10:24:20:frequency.c:657:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 72
2024-06-28 10:24:20:frequency.c:665:inc_freq_with_fixed_vco: set to 72M, get pcb 35 ~ 36, chip_temp 41 ~ 43
2024-06-28 10:24:20:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:24:20:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 72 clock_counter_limit 8, no check, skip.
2024-06-28 10:24:28:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 37, chip_temp 42 ~ 45, now 81.1s, target 47.5
2024-06-28 10:24:28:frequency.c:657:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 84
2024-06-28 10:24:28:frequency.c:665:inc_freq_with_fixed_vco: set to 84M, get pcb 36 ~ 37, chip_temp 42 ~ 45
2024-06-28 10:24:28:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:24:28:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 84 clock_counter_limit 10, no check, skip.
2024-06-28 10:24:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 39, chip_temp 44 ~ 47, now 89.1s, target 48.8
2024-06-28 10:24:37:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 39, chip_temp 44 ~ 47, now 90.1s, target 49.0
2024-06-28 10:24:37:frequency.c:657:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 86
2024-06-28 10:24:37:frequency.c:665:inc_freq_with_fixed_vco: set to 86M, get pcb 36 ~ 39, chip_temp 44 ~ 47
2024-06-28 10:24:37:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:24:37:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 86 clock_counter_limit 10, no check, skip.
2024-06-28 10:24:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 40, chip_temp 45 ~ 48, now 98.1s, target 50.3
2024-06-28 10:24:45:frequency.c:657:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 101
2024-06-28 10:24:45:frequency.c:665:inc_freq_with_fixed_vco: set to 101M, get pcb 37 ~ 40, chip_temp 45 ~ 48
2024-06-28 10:24:45:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:24:45:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 101 clock_counter_limit 13, no check, skip.
2024-06-28 10:24:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 42, chip_temp 47 ~ 49, now 106.1s, target 51.7
2024-06-28 10:24:53:frequency.c:657:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 108
2024-06-28 10:24:53:frequency.c:665:inc_freq_with_fixed_vco: set to 108M, get pcb 38 ~ 42, chip_temp 47 ~ 49
2024-06-28 10:24:53:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:24:53:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 108 clock_counter_limit 14, no check, skip.
2024-06-28 10:25:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 43, chip_temp 48 ~ 51, now 114.1s, target 53.0
2024-06-28 10:25:01:frequency.c:657:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 121
2024-06-28 10:25:01:frequency.c:665:inc_freq_with_fixed_vco: set to 121M, get pcb 38 ~ 43, chip_temp 48 ~ 51
2024-06-28 10:25:01:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:25:01:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 121 clock_counter_limit 16, no check, skip.
2024-06-28 10:25:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 44, chip_temp 50 ~ 52, now 122.1s, target 54.4
2024-06-28 10:25:09:frequency.c:657:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 126
2024-06-28 10:25:09:frequency.c:665:inc_freq_with_fixed_vco: set to 126M, get pcb 39 ~ 44, chip_temp 50 ~ 52
2024-06-28 10:25:09:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:25:09:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 126 clock_counter_limit 17, no check, skip.
2024-06-28 10:25:17:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 46, chip_temp 52 ~ 54, now 130.1s, target 55.7
2024-06-28 10:25:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 46, chip_temp 51 ~ 55, now 131.1s, target 55.9
2024-06-28 10:25:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 46, chip_temp 51 ~ 55, now 132.1s, target 56.0
2024-06-28 10:25:20:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 46, chip_temp 51 ~ 55, now 133.1s, target 56.2
2024-06-28 10:25:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 46, chip_temp 52 ~ 55, now 134.1s, target 56.4
2024-06-28 10:25:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 47, chip_temp 52 ~ 54, now 135.1s, target 56.5
2024-06-28 10:25:22:frequency.c:657:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 144
2024-06-28 10:25:22:frequency.c:665:inc_freq_with_fixed_vco: set to 144M, get pcb 40 ~ 47, chip_temp 52 ~ 54
2024-06-28 10:25:22:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:25:22:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 144 clock_counter_limit 20, no check, skip.
2024-06-28 10:25:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 48, chip_temp 54 ~ 57, now 143.1s, target 57.9
2024-06-28 10:25:31:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 49, chip_temp 54 ~ 57, now 144.1s, target 58.0
2024-06-28 10:25:32:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 49, chip_temp 54 ~ 57, now 145.1s, target 58.2
2024-06-28 10:25:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 49, chip_temp 54 ~ 58, now 146.1s, target 58.4
2024-06-28 10:25:34:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 49, chip_temp 54 ~ 58, now 147.1s, target 58.5
2024-06-28 10:25:35:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 50, chip_temp 55 ~ 58, now 148.1s, target 58.7
2024-06-28 10:25:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 49, chip_temp 55 ~ 58, now 149.1s, target 58.9
2024-06-28 10:25:37:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 50, chip_temp 55 ~ 58, now 150.1s, target 59.0
2024-06-28 10:25:38:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 50, chip_temp 55 ~ 59, now 151.1s, target 59.2
2024-06-28 10:25:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 50, chip_temp 55 ~ 60, now 152.2s, target 59.4
2024-06-28 10:25:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 60 > 59.4 target_temp.
2024-06-28 10:25:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 52, chip_temp 56 ~ 60, now 158.2s, target 60.4
2024-06-28 10:25:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 52, chip_temp 55 ~ 60, now 159.2s, target 60.5
2024-06-28 10:25:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 52, chip_temp 56 ~ 61, now 160.2s, target 60.7
2024-06-28 10:25:47:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 61 > 60.7 target_temp.
2024-06-28 10:25:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 54, chip_temp 56 ~ 62, now 166.2s, target 61.7
2024-06-28 10:25:53:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 62 > 61.7 target_temp.
2024-06-28 10:25:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 57 ~ 64, now 172.2s, target 62.7
2024-06-28 10:25:59:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 64 > 62.7 target_temp.
2024-06-28 10:26:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 56, chip_temp 56 ~ 65, now 178.2s, target 63.7
2024-06-28 10:26:05:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 63.7 target_temp.
2024-06-28 10:26:11:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 56, chip_temp 54 ~ 66, now 184.2s, target 64.7
2024-06-28 10:26:11:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 64.7 target_temp.
2024-06-28 10:26:17:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 57, chip_temp 53 ~ 66, now 190.2s, target 65.7
2024-06-28 10:26:17:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 65.7 target_temp.
2024-06-28 10:26:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 57, chip_temp 52 ~ 66, now 196.2s, target 66.7
2024-06-28 10:26:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 57, chip_temp 52 ~ 66, now 197.2s, target 66.9
2024-06-28 10:26:25:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 57, chip_temp 52 ~ 66, now 198.2s, target 67.0
2024-06-28 10:26:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 58, chip_temp 51 ~ 66, now 199.2s, target 67.2
2024-06-28 10:26:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 57, chip_temp 51 ~ 66, now 200.2s, target 67.4
2024-06-28 10:26:28:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 57, chip_temp 51 ~ 65, now 201.2s, target 67.5
2024-06-28 10:26:28:frequency.c:657:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 151
2024-06-28 10:26:28:frequency.c:665:inc_freq_with_fixed_vco: set to 151M, get pcb 39 ~ 57, chip_temp 51 ~ 65
2024-06-28 10:26:28:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:26:28:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 151 clock_counter_limit 21, no check, skip.
2024-06-28 10:26:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 58, chip_temp 51 ~ 66, now 209.2s, target 68.9
2024-06-28 10:26:36:frequency.c:657:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 168
2024-06-28 10:26:36:frequency.c:665:inc_freq_with_fixed_vco: set to 168M, get pcb 39 ~ 58, chip_temp 51 ~ 66
2024-06-28 10:26:36:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:26:36:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 168 clock_counter_limit 23, no check, skip.
2024-06-28 10:26:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 58, chip_temp 51 ~ 65, now 217.2s, target 70.2
2024-06-28 10:26:44:frequency.c:657:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 4, _POSTDIV2 = 4, USER_DIV = 1, freq = 189
2024-06-28 10:26:44:frequency.c:665:inc_freq_with_fixed_vco: set to 189M, get pcb 38 ~ 58, chip_temp 51 ~ 65
2024-06-28 10:26:44:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:26:44:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 189 clock_counter_limit 27, no check, skip.
2024-06-28 10:26:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 57, chip_temp 52 ~ 66, now 225.2s, target 68.5
2024-06-28 10:26:52:frequency.c:657:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 202
2024-06-28 10:26:52:frequency.c:665:inc_freq_with_fixed_vco: set to 202M, get pcb 38 ~ 57, chip_temp 52 ~ 66
2024-06-28 10:26:52:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:26:52:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 202 clock_counter_limit 29, no check, skip.
2024-06-28 10:27:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 57, chip_temp 53 ~ 66, now 233.2s, target 69.9
2024-06-28 10:27:00:frequency.c:657:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 216
2024-06-28 10:27:00:frequency.c:665:inc_freq_with_fixed_vco: set to 216M, get pcb 37 ~ 57, chip_temp 53 ~ 66
2024-06-28 10:27:00:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:27:00:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 216 clock_counter_limit 31, no check, skip.
2024-06-28 10:27:08:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 57, chip_temp 55 ~ 66, now 241.2s, target 71.2
2024-06-28 10:27:08:frequency.c:657:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 4, _POSTDIV2 = 3, USER_DIV = 1, freq = 253
2024-06-28 10:27:08:frequency.c:665:inc_freq_with_fixed_vco: set to 253M, get pcb 38 ~ 57, chip_temp 55 ~ 66
2024-06-28 10:27:08:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:27:08:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 253 clock_counter_limit 37, no check, skip.
2024-06-28 10:27:16:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 57, chip_temp 56 ~ 67, now 249.2s, target 69.5
2024-06-28 10:27:16:frequency.c:657:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 253
2024-06-28 10:27:16:frequency.c:665:inc_freq_with_fixed_vco: set to 253M, get pcb 39 ~ 57, chip_temp 56 ~ 67
2024-06-28 10:27:16:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:27:16:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 253 clock_counter_limit 37, no check, skip.
2024-06-28 10:27:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 57, chip_temp 56 ~ 66, now 257.2s, target 70.9
2024-06-28 10:27:24:frequency.c:657:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 303
2024-06-28 10:27:24:frequency.c:665:inc_freq_with_fixed_vco: set to 303M, get pcb 38 ~ 57, chip_temp 56 ~ 66
2024-06-28 10:27:24:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2050, step by step.
2024-06-28 10:27:33:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 3 with 0 regs timeout.
chain 3 domain 0: d0 0.330, d1 0.328, d2 0.327, d3 0.323, sum = 1.307861
chain 3 domain 1: d0 0.341, d1 0.337, d2 0.339, d3 0.341, sum = 1.357259
chain 3 domain 2: d0 0.356, d1 0.355, d2 0.355, d3 0.354, sum = 1.419637
chain 3 domain 3: d0 0.339, d1 0.335, d2 0.336, d3 0.339, sum = 1.349203
chain 3 domain 4: d0 0.353, d1 0.352, d2 0.352, d3 0.352, sum = 1.408732
chain 3 domain 5: d0 0.336, d1 0.333, d2 0.334, d3 0.334, sum = 1.336060
chain 3 domain 6: d0 0.342, d1 0.339, d2 0.338, d3 0.339, sum = 1.357666
chain 3 domain 7: d0 0.331, d1 0.326, d2 0.325, d3 0.325, sum = 1.306112
chain 3 domain 8: d0 0.331, d1 0.331, d2 0.330, d3 0.334, sum = 1.326823
chain 3 domain 9: d0 0.343, d1 0.339, d2 0.339, d3 0.341, sum = 1.361532
chain 3 domain 10: d0 0.334, d1 0.334, d2 0.332, d3 0.333, sum = 1.333659
chain 3 domain 11: d0 0.331, d1 0.324, d2 0.325, d3 0.325, sum = 1.304728
chain 3 domain 12: d0 0.329, d1 0.326, d2 0.325, d3 0.325, sum = 1.305013
chain 3 domain 13: d0 0.336, d1 0.332, d2 0.331, d3 0.331, sum = 1.330485
chain 3 domain 14: d0 0.348, d1 0.345, d2 0.343, d3 0.344, sum = 1.380941
2024-06-28 10:27:33:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2024-06-28 10:27:33:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:27:33:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 303 clock_counter_limit 45, no check, skip.
2024-06-28 10:27:36:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 3 with 0 regs timeout.
chain 3 domain 0: d0 0.329, d1 0.328, d2 0.326, d3 0.325, sum = 1.308390
chain 3 domain 1: d0 0.341, d1 0.336, d2 0.338, d3 0.340, sum = 1.354533
chain 3 domain 2: d0 0.354, d1 0.353, d2 0.353, d3 0.353, sum = 1.412923
chain 3 domain 3: d0 0.339, d1 0.335, d2 0.335, d3 0.339, sum = 1.347860
chain 3 domain 4: d0 0.352, d1 0.350, d2 0.351, d3 0.351, sum = 1.404053
chain 3 domain 5: d0 0.336, d1 0.332, d2 0.332, d3 0.333, sum = 1.332845
chain 3 domain 6: d0 0.341, d1 0.339, d2 0.337, d3 0.338, sum = 1.354248
chain 3 domain 7: d0 0.331, d1 0.326, d2 0.325, d3 0.326, sum = 1.307983
chain 3 domain 8: d0 0.332, d1 0.332, d2 0.331, d3 0.333, sum = 1.328410
chain 3 domain 9: d0 0.343, d1 0.339, d2 0.337, d3 0.341, sum = 1.360392
chain 3 domain 10: d0 0.335, d1 0.334, d2 0.332, d3 0.334, sum = 1.334147
chain 3 domain 11: d0 0.331, d1 0.326, d2 0.325, d3 0.327, sum = 1.309001
chain 3 domain 12: d0 0.330, d1 0.327, d2 0.326, d3 0.327, sum = 1.309611
chain 3 domain 13: d0 0.337, d1 0.333, d2 0.331, d3 0.332, sum = 1.332560
chain 3 domain 14: d0 0.347, d1 0.344, d2 0.342, d3 0.343, sum = 1.376139
2024-06-28 10:27:36:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2024-06-28 10:27:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 56, chip_temp 57 ~ 66, now 275.2s, target 73.9
2024-06-28 10:27:42:frequency.c:657:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 4, _POSTDIV2 = 2, USER_DIV = 1, freq = 379
2024-06-28 10:27:42:frequency.c:665:inc_freq_with_fixed_vco: set to 379M, get pcb 38 ~ 56, chip_temp 57 ~ 66
2024-06-28 10:27:42:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1960, step by step.
2024-06-28 10:27:52:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 3 with 0 regs timeout.
chain 3 domain 0: d0 0.315, d1 0.313, d2 0.312, d3 0.309, sum = 1.248942
chain 3 domain 1: d0 0.325, d1 0.320, d2 0.325, d3 0.324, sum = 1.294434
chain 3 domain 2: d0 0.338, d1 0.338, d2 0.337, d3 0.338, sum = 1.351562
chain 3 domain 3: d0 0.324, d1 0.319, d2 0.322, d3 0.323, sum = 1.288411
chain 3 domain 4: d0 0.337, d1 0.335, d2 0.335, d3 0.336, sum = 1.343343
chain 3 domain 5: d0 0.321, d1 0.317, d2 0.319, d3 0.318, sum = 1.275269
chain 3 domain 6: d0 0.326, d1 0.323, d2 0.324, d3 0.322, sum = 1.294434
chain 3 domain 7: d0 0.316, d1 0.310, d2 0.311, d3 0.311, sum = 1.248698
chain 3 domain 8: d0 0.317, d1 0.315, d2 0.318, d3 0.318, sum = 1.269043
chain 3 domain 9: d0 0.328, d1 0.322, d2 0.324, d3 0.326, sum = 1.300496
chain 3 domain 10: d0 0.320, d1 0.318, d2 0.318, d3 0.317, sum = 1.272909
chain 3 domain 11: d0 0.317, d1 0.310, d2 0.311, d3 0.311, sum = 1.249390
chain 3 domain 12: d0 0.314, d1 0.311, d2 0.312, d3 0.310, sum = 1.248291
chain 3 domain 13: d0 0.322, d1 0.316, d2 0.318, d3 0.316, sum = 1.272135
chain 3 domain 14: d0 0.331, d1 0.328, d2 0.327, d3 0.328, sum = 1.314209
2024-06-28 10:27:52:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2024-06-28 10:27:52:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2024-06-28 10:27:52:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 379 clock_counter_limit 57, no check, skip.
2024-06-28 10:27:54:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 3 with 0 regs timeout.
chain 3 domain 0: d0 0.315, d1 0.313, d2 0.313, d3 0.310, sum = 1.250244
chain 3 domain 1: d0 0.325, d1 0.320, d2 0.324, d3 0.324, sum = 1.292277
chain 3 domain 2: d0 0.337, d1 0.336, d2 0.334, d3 0.336, sum = 1.342936
chain 3 domain 3: d0 0.324, d1 0.319, d2 0.322, d3 0.323, sum = 1.287638
chain 3 domain 4: d0 0.336, d1 0.334, d2 0.332, d3 0.335, sum = 1.337646
chain 3 domain 5: d0 0.320, d1 0.317, d2 0.318, d3 0.318, sum = 1.272949
chain 3 domain 6: d0 0.325, d1 0.322, d2 0.323, d3 0.322, sum = 1.291829
chain 3 domain 7: d0 0.317, d1 0.311, d2 0.311, d3 0.311, sum = 1.249471
chain 3 domain 8: d0 0.318, d1 0.317, d2 0.317, d3 0.319, sum = 1.270630
chain 3 domain 9: d0 0.328, d1 0.322, d2 0.324, d3 0.326, sum = 1.300130
chain 3 domain 10: d0 0.320, d1 0.318, d2 0.319, d3 0.318, sum = 1.274577
chain 3 domain 11: d0 0.317, d1 0.311, d2 0.312, d3 0.313, sum = 1.253581
chain 3 domain 12: d0 0.315, d1 0.312, d2 0.313, d3 0.313, sum = 1.253418
chain 3 domain 13: d0 0.322, d1 0.317, d2 0.318, d3 0.317, sum = 1.274048
chain 3 domain 14: d0 0.330, d1 0.327, d2 0.326, d3 0.327, sum = 1.309977
2024-06-28 10:27:54:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2024-06-28 10:27:54:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1910, step by step.
2024-06-28 10:28:03:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 3 with 0 regs timeout.
chain 3 domain 0: d0 0.307, d1 0.305, d2 0.304, d3 0.303, sum = 1.218669
chain 3 domain 1: d0 0.317, d1 0.312, d2 0.316, d3 0.317, sum = 1.262288
chain 3 domain 2: d0 0.329, d1 0.328, d2 0.327, d3 0.328, sum = 1.312785
chain 3 domain 3: d0 0.316, d1 0.311, d2 0.314, d3 0.315, sum = 1.256510
chain 3 domain 4: d0 0.328, d1 0.325, d2 0.326, d3 0.328, sum = 1.306396
chain 3 domain 5: d0 0.313, d1 0.308, d2 0.311, d3 0.310, sum = 1.242228
chain 3 domain 6: d0 0.317, d1 0.314, d2 0.315, d3 0.315, sum = 1.260824
chain 3 domain 7: d0 0.309, d1 0.303, d2 0.304, d3 0.304, sum = 1.218994
chain 3 domain 8: d0 0.310, d1 0.309, d2 0.310, d3 0.311, sum = 1.239054
chain 3 domain 9: d0 0.320, d1 0.315, d2 0.316, d3 0.318, sum = 1.268839
chain 3 domain 10: d0 0.312, d1 0.310, d2 0.310, d3 0.311, sum = 1.243001
chain 3 domain 11: d0 0.309, d1 0.304, d2 0.304, d3 0.305, sum = 1.222168
chain 3 domain 12: d0 0.307, d1 0.305, d2 0.304, d3 0.305, sum = 1.221476
chain 3 domain 13: d0 0.314, d1 0.309, d2 0.310, d3 0.309, sum = 1.242228
chain 3 domain 14: d0 0.322, d1 0.318, d2 0.319, d3 0.319, sum = 1.277506
2024-06-28 10:28:03:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2024-06-28 10:28:03:frequency.c:442:inc_asic_diff_freq_by_steps: chain = 3, start = 380, freq_step = 5
2024-06-28 10:28:14:driver-btm-api.c:666:set_timeout: freq = 430, percent = 90, hcn = 235928, timeout = 548
2024-06-28 10:28:14:power_api.c:353:set_to_working_voltage_by_steps: Set to voltage raw 1850, step by step. -
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 195688K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 33688K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 20648K (cc6d7000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x0000066e0000
nand_read_bbt: bad block at 0x000007d00000
nand_read_bbt: bad block at 0x000007d20000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 123/70, WL threshold: 4096, image sequence number: 2636279313
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A5E2E817-94FA-4998-90AB-D2C873A8EBA9, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 5338/3375, WL threshold: 4096, image sequence number: 614900815
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 91DF6B3D-1A99-4241-87C7-EB25097110C1, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb54000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
2024-06-28 17:46:17:thread.c:1555:create_bitmain_soc_init_thread: create thread
2024-06-28 17:46:17:driver-btm-api.c:682:init_freq_mode: This is scan-user version
2024-06-28 17:46:17:driver-btm-api.c:2518:bitmain_soc_init: Miner compile time: Fri Jan 8 22:31:06 CST 2021 type: Antminer S17e
2024-06-28 17:46:17:driver-btm-api.c:2519:bitmain_soc_init: commit version: 37668c9 2021-01-08 18:20:11, build by: jenkins 2021-01-08 22:35:52
2024-06-28 17:46:17:driver-btm-api.c:2520:bitmain_soc_init: opt_multi_version = 1
2024-06-28 17:46:17:driver-btm-api.c:2521:bitmain_soc_init: opt_bitmain_ab = 1
2024-06-28 17:46:17:driver-btm-api.c:2522:bitmain_soc_init: mid_auto_gen = 0
2024-06-28 17:46:17:driver-btm-api.c:2523:bitmain_soc_init: work_mode = 0
2024-06-28 17:46:17:driver-btm-api.c:2524:bitmain_soc_init: power_feedback_en = true
2024-06-28 17:46:17:driver-btm-api.c:2067:show_sn: no SN got, please write SN to /config/sn
2024-06-28 17:46:17:driver-btm-api.c:1384:miner_device_init: Detect 256MB control board of XILINX
2024-06-28 17:46:17:driver-btm-api.c:1325:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2024-06-28 17:46:23:driver-btm-api.c:1309:init_miner_version: miner ID : 81204c842b104814
2024-06-28 17:46:23:driver-btm-api.c:1315:init_miner_version: FPGA Version = 0xB023
2024-06-28 17:46:29:auto_adapt.c:100:_get_board_info: chain[0] board bin: 1, chip bin: 2, chip ft: A4V4, chip version: AB
2024-06-28 17:46:29:auto_adapt.c:100:_get_board_info: chain[1] board bin: 1, chip bin: 2, chip ft: A4V4, chip version: AB
2024-06-28 17:46:29:auto_adapt.c:100:_get_board_info: chain[2] board bin: 1, chip bin: 1, chip ft: A4V4, chip version: AB
2024-06-28 17:46:29:driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
2024-06-28 17:46:29 voltage[0] = 1900
2024-06-28 17:46:29 voltage[1] = 1850
2024-06-28 17:46:29 voltage[2] = 1850
2024-06-28 17:46:29:driver-btm-api.c:482:check_chain_conf_same: Config are different, min = 1850, max = 1900, will use max one.
2024-06-28 17:46:29:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed
voltage_ref = 1900
2100 2100 2100 2100 2100 2100
2100 2100 2100 2100 2100 2100
2100 2100 2100 2100 2100 2100
2100 2100 2100 2100 2080 2020
2100 2080 2060 2050 2010 19702024-06-28 17:46:29:thread.c:1523:create_read_nonce_reg_thread: create thread
2024-06-28 17:46:29:driver-btm-api.c:698:dump_pcb_bom_version: Chain [0] PCB Version: 0x0128
2024-06-28 17:46:29:driver-btm-api.c:699:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2024-06-28 17:46:29:driver-btm-api.c:698:dump_pcb_bom_version: Chain [1] PCB Version: 0x0128
2024-06-28 17:46:29:driver-btm-api.c:699:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2024-06-28 17:46:29:driver-btm-api.c:698:dump_pcb_bom_version: Chain [2] PCB Version: 0x0128
2024-06-28 17:46:29:driver-btm-api.c:699:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2024-06-28 17:46:35:driver-btm-api.c:2344:bitmain_board_init: Fan check passed.
2024-06-28 17:46:36:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2024-06-28 17:46:39:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2024-06-28 17:46:40:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2024-06-28 17:46:42:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2024-06-28 17:46:43:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2024-06-28 17:46:45:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2024-06-28 17:46:45:thread.c:1518:create_pic_heart_beat_thread: create thread
2024-06-28 17:46:46:power_api.c:241:power_init: power type version: 0x0042
2024-06-28 17:46:48:power_api.c:259:power_init: Power init:
2024-06-28 17:46:48:power_api.c:260:power_init: current_voltage_raw = 2136
2024-06-28 17:46:48:power_api.c:261:power_init: highest_voltage_raw = 2000
2024-06-28 17:46:48:power_api.c:262:power_init: working_voltage_raw = 1800
2024-06-28 17:46:48:power_api.c:263:power_init: higher_voltage_raw = 1850
2024-06-28 17:46:48:power_api.c:264:power_init: check_asic_voltage_raw = 1800
2024-06-28 17:46:48:driver-btm-api.c:2354:bitmain_board_init: Enter 60s sleep to make sure power release finish.
2024-06-28 17:47:50:driver-btm-api.c:1123:check_asic_number_until_volt_balance: THIS is No.1 time boost asic:
2024-06-28 17:47:50:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800
2024-06-28 17:47:53:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
2024-06-28 17:48:21:uart.c:69:set_baud: set UART baud to 115200
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 17:48:26:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
2024-06-28 17:48:27:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2024-06-28 17:48:29:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 17:48:33:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
2024-06-28 17:48:34:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2024-06-28 17:48:36:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 17:48:40:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
2024-06-28 17:48:41:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2024-06-28 17:48:43:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 17:48:47:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 3
2024-06-28 17:48:48:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2024-06-28 17:48:50:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2024-06-28 17:48:50:driver-btm-api.c:1217:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 17:48:55:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2024-06-28 17:48:57:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2024-06-28 17:48:59:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 17:49:02:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2024-06-28 17:49:04:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2024-06-28 17:49:06:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 17:49:09:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2024-06-28 17:49:11:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2024-06-28 17:49:13:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 17:49:16:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 3
2024-06-28 17:49:18:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2024-06-28 17:49:20:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2024-06-28 17:49:20:driver-btm-api.c:1217:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 17:49:25:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2024-06-28 17:49:26:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2024-06-28 17:49:28:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 17:49:32:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2024-06-28 17:49:33:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2024-06-28 17:49:35:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 17:49:38:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2024-06-28 17:49:40:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2024-06-28 17:49:42:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2024-06-28 17:49:45:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 3
2024-06-28 17:49:47:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2024-06-28 17:49:49:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2024-06-28 17:49:49:driver-btm-api.c:1217:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2024-06-28 17:49:50:driver-btm-api.c:247:set_miner_status: ERROR_SOC_INIT
2024-06-28 17:49:50:driver-btm-api.c:176:stop_mining: stop mining: soc init failed!
2024-06-28 17:49:50:thread.c:1595:cancel_read_nonce_reg_thread: cancel thread
2024-06-28 17:49:50:driver-btm-api.c:147:killall_hashboard: ****power off hashboard**** -
Dear customer.
From the kernel log, it can't detect the hashboard. please kindly exclude the issue by following steps:
1.Check the wires for the hashboard--pull them and re-plug them again, and also you can try to change the new wires.
2.Please clean up the dust.
How To Clean and Dust The Antminers
https://support.bitmain.com/hc/en-us/articles/115004520173-How-To-Clean-and-Dust-The-Antminers
3.Reset the miner to the factory settings
https://support.bitmain.com/hc/en-us/articles/115003595387-How-to-reset-miner-to-factory-settings-
If there are still the same problems after the above steps, please send it to repair.
Best regards
BITMAIN
-
Dear Customer,
If you have any questions please feel free to contact us.
Please creat support ticket by https://support.bitmain.com/hc/en-us/requests/new
Or send email to customersupport@bitmain.com
We will reply to your question as soon as possible.
请先登录再写评论。
评论
4 条评论