Antminer S19j Pro_96T doesn't Mine

Antminer S19j Pro_96T
First we found a problem with BB Ctrl Board: None of the LEDs on
I replace the Ctrl board with a brand-new board Ctrl_BFO Version 2.50 and flash it with Antminer-S19Pro+-Hydro-release-202303081530.bmu

Real Time Hashrate Normal
Network Status Normal
Fan Speed Normal
Miner Temperature Normal

But it doesn’t Mine

What could be the problem ?
How can it be solved?

Thanks
Gonzalo Estivariz

LOG:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13+ (jenkins@nomd-nomd-fwc-bj) (gcc version 4.9.4 (Linaro GCC 4.9-2017.01) ) #28 SMP Tue Jun 22 17:32:38 CST 2021
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c05d9000, node_mem_map c0631000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c083e000 s9856 r8192 d14720 u32768
[    0.000000] pcpu-alloc: s9856 r8192 d14720 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 245448k/245448k available, 16696k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc053f674   (5342 kB)
[    0.000000]       .init : 0xc0540000 - 0xc0571680   ( 198 kB)
[    0.000000]       .data : 0xc0572000 - 0xc05d9ee0   ( 416 kB)
[    0.000000]        .bss : 0xc05d9ee0 - 0xc0630448   ( 346 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000349] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015451] pid_max: default: 32768 minimum: 301
[    0.015672] Security Framework initialized
[    0.015765] Mount-cache hash table entries: 512
[    0.024262] Initializing cgroup subsys cpuacct
[    0.024293] Initializing cgroup subsys memory
[    0.024354] Initializing cgroup subsys blkio
[    0.024484] CPU: Testing write buffer coherency: ok
[    0.024998] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025072] Setting up static identity map for 0x8030a500 - 0x8030a54c
[    0.026431] Brought up 1 CPUs
[    0.026453] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.027730] devtmpfs: initialized
[    0.091366] pinctrl core: initialized pinctrl subsystem
[    0.091575] rstctl core: initialized rstctl subsystem
[    0.092085] regulator-dummy: no parameters
[    0.092580] NET: Registered protocol family 16
[    0.093235] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.102654] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.102830] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.103878] platform 49000000.edma: alias fck already exists
[    0.103907] platform 49000000.edma: alias fck already exists
[    0.103933] platform 49000000.edma: alias fck already exists
[    0.105045] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.105225] OMAP GPIO hardware version 0.1
[    0.106601] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.107897] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.109342] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.109858] of_get_named_gpio_flags exited with status 52
[    0.109887] gpio-rctrl rstctl.3: loaded OK
[    0.114755] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.117986] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.119873] cpsw.0: No hwaddr in dt. Using 58:7a:62:8e:46:1b from efuse
[    0.128748] bio: create slab <bio-0> at 0
[    0.140179] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.140463] of_get_named_gpio_flags: can't parse gpios property
[    0.140694] vmmcsd_fixed: 3300 mV 
[    0.143799] SCSI subsystem initialized
[    0.145020] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.145051] omap_i2c 4819c000.i2c: unable to select pin group
[    0.145285] pps_core: LinuxPPS API ver. 1 registered
[    0.145301] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.146891] Switching to clocksource gp_timer
[    0.164085] NET: Registered protocol family 2
[    0.165144] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.165232] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.165326] TCP: Hash tables configured (established 2048 bind 2048)
[    0.165419] TCP: reno registered
[    0.165444] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.165489] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.165899] NET: Registered protocol family 1
[    0.166462] RPC: Registered named UNIX socket transport module.
[    0.166481] RPC: Registered udp transport module.
[    0.166552] RPC: Registered tcp transport module.
[    0.166567] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.166948] Trying to unpack rootfs image as initramfs...
[    1.055520] Freeing initrd memory: 6448K
[    1.056147] CPU PMU: probing PMU on CPU 0
[    1.056177] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.056696] omap2_mbox_probe: platform not supported
[    1.060464] VFS: Disk quotas dquot_6.5.2
[    1.060710] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.062107] NFS: Registering the id_resolver key type
[    1.062198] Key type id_resolver registered
[    1.062214] Key type id_legacy registered
[    1.062280] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.062718] msgmni has been set to 491
[    1.065545] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.065570] io scheduler noop registered
[    1.065587] io scheduler deadline registered
[    1.065643] io scheduler cfq registered (default)
[    1.069342] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.071602] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.071625] of_get_named_gpio_flags: can't parse gpios property
[    1.071901] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    1.692779] console [ttyO0] enabled
[    1.697054] of_get_named_gpio_flags: can't parse gpios property
[    1.697305] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    1.705761] of_get_named_gpio_flags: can't parse gpios property
[    1.705984] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    1.714370] of_get_named_gpio_flags: can't parse gpios property
[    1.714581] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    1.722974] of_get_named_gpio_flags: can't parse gpios property
[    1.723237] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    1.745126] brd: module loaded
[    1.755370] loop: module loaded
[    1.759405] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    1.769475] ONFI param page 0 valid
[    1.773184] ONFI flash detected
[    1.776509] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[    1.788435] omap2-nand: detected x8 NAND flash
[    1.793103] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    1.798687] omap2-nand: using custom ecc layout
[    1.803539] 12 ofpart partitions found on MTD device omap2-nand.0
[    1.809939] Creating 12 MTD partitions on "omap2-nand.0":
[    1.815620] 0x000000000000-0x000000020000 : "spl"
[    1.822297] 0x000000020000-0x000000040000 : "spl_backup1"
[    1.829630] 0x000000040000-0x000000060000 : "spl_backup2"
[    1.836983] 0x000000060000-0x000000080000 : "spl_backup3"
[    1.844311] 0x000000080000-0x000000240000 : "u-boot"
[    1.852654] 0x000000240000-0x000000260000 : "bootenv"
[    1.859606] 0x000000260000-0x000000280000 : "fdt"
[    1.866244] 0x000000280000-0x000000780000 : "kernel"
[    1.877218] 0x000000800000-0x000001c00000 : "root"
[    1.900939] 0x000001c00000-0x000001e00000 : "config"
[    1.909390] 0x000001e00000-0x000002000000 : "sig"
[    1.917602] 0x000002000000-0x000008000000 : "nvdata"
[    2.006989] OneNAND driver initializing
[    2.013396] mousedev: PS/2 mouse device common for all mice
[    2.021083] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    2.028850] i2c /dev entries driver
[    2.033155] pps_ldisc: PPS line discipline registered
[    2.038643] Driver for 1-wire Dallas network protocol.
[    2.045905] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    2.053502] cpuidle: using governor ladder
[    2.057829] cpuidle: using governor menu
[    2.062405] of_get_named_gpio_flags exited with status 6
[    2.062423] of_get_named_gpio_flags: can't parse gpios property
[    2.062439] of_get_named_gpio_flags: can't parse gpios property
[    2.062473] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    2.069700] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    2.076502] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    2.083718] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    2.091036] mmc.4 supply vmmc_aux not found, using dummy regulator
[    2.098009] omap_hsmmc mmc.4: pins are not configured from the driver
[    2.131957] of_get_named_gpio_flags exited with status -517
[    2.132022] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    2.139838] ledtrig-cpu: registered to indicate activity on CPUs
[    2.146611] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    2.153803] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    2.161849] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    2.168136] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    2.175317] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    2.183616] nf_conntrack version 0.5.0 (3935 buckets, 15740 max)
[    2.191098] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.196878] TCP: cubic registered
[    2.200423] Initializing XFRM netlink socket
[    2.205056] NET: Registered protocol family 10
[    2.211150] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.217104] NET: Registered protocol family 17
[    2.221882] NET: Registered protocol family 15
[    2.226705] Key type dns_resolver registered
[    2.231282] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    2.239359] ThumbEE CPU extension supported.
[    2.243874] Registering SWP/SWPB emulation handler
[    2.249979] registered taskstats version 1
[    2.255754] of_get_named_gpio_flags exited with status -517
[    2.255824] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    2.313059] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    2.319470] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    2.334287] libphy: 4a101000.mdio: probed
[    2.338636] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    2.348716] of_get_named_gpio_flags exited with status -517
[    2.348779] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    2.356263] Detected MACID = 58:7a:62:8e:46:1b
[    2.360947] cpsw 4a100000.ethernet: NAPI disabled
[    2.367916] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    2.377106] cpu0 supply cpu0 not found, using dummy regulator
[    2.383589] cpufreq_cpu0: failed to scale voltage up: -22
[    2.389411] cpufreq_cpu0: failed to scale voltage up: -22
[    2.403113] Freeing init memory: 196K
[    2.484046] devpts: called with bogus options
[    2.907614] jffs2: notice: (109) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    4.933501] jffs2: Empty flash at 0x05182250 ends at 0x05182800
[    4.987867] jffs2: Empty flash at 0x05187a58 ends at 0x05188000
[    5.354673] jffs2: notice: (115) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.804487] net eth0: initializing cpsw version 1.12 (0)
[    5.812872] net eth0: phy found : id is : 0x7c0f1
[    5.826395] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.448739] jffs2: notice: (116) check_node_data: wrong data CRC in data node at 0x05189f64: read 0xd337e8e7, calculated 0x7b372f9b.
[    8.887784] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[    8.893970] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.450411] register uart_trans chrdev success.
[   11.462039] tty port open success [/dev/ttyO1]!
[   11.472564] init sucess for tty struct (249:1)  [/dev/ttyO1]
[   11.479267] tty port open success [/dev/ttyO2]!
[   11.490956] init sucess for tty struct (249:2)  [/dev/ttyO2]
[   11.497528] tty port open success [/dev/ttyO4]!
[   11.506578] init sucess for tty struct (249:4)  [/dev/ttyO4]
[   11.516765] tty port open success [/dev/ttyO5]!
[   11.526246] init sucess for tty struct (249:5)  [/dev/ttyO5]
[   20.000752] uart trans dev open.
[   20.004882] uart_buf virt addr = 0xccdc0000
[   20.009490] uart_buf phys addr = 0x8cdc0000
[   20.014021] uart_buf pfn       = 0x0008cdc0
[   20.019708] uart trans stop send work timer.
[   20.024760] uart trans set chain exist bits:0x7.
[   20.029939] uart trans set work queue count 768.
[   33.919556] uart trans start send work timer.
[   34.232931] uart trans stop send work timer.
[   38.152472] uart trans stop send work timer.
[   61.940160] uart trans start send work timer.

===========================================Miner log===========================================
2000-01-01 00:00:09 Miner compile time: Tue Jun 22 17:45:49 CST 2021 type: Antminer S19j Pro
2000-01-01 00:00:10 This is fix-freq version
2000-01-01 00:00:10 Miner compile time: Tue Jun 22 17:45:49 CST 2021 type: Antminer S19j Pro
2000-01-01 00:00:10 commit åversion: 93c0f7a 2021-06-22 17:54:06, build by: jenkins 2021-06-22 17:59:34
2000-01-01 00:00:10 opt_multi_version     = 1
2000-01-01 00:00:10 opt_bitmain_ab        = 1
2000-01-01 00:00:10 mid_auto_gen          = 1
2000-01-01 00:00:10 opt_bitmain_work_mode = 0
2000-01-01 00:00:10 port 51 already exported
2000-01-01 00:00:10 port 49 already exported
2000-01-01 00:00:10 port 48 already exported
2000-01-01 00:00:10 port 60 already exported
2000-01-01 00:00:10 port 47 already exported
2000-01-01 00:00:10 port 27 already exported
2000-01-01 00:00:10 port 44 already exported
2000-01-01 00:00:10 port 22 already exported
2000-01-01 00:00:10 no board pluged in socket 44
2000-01-01 00:00:10 port 23 already exported
2000-01-01 00:00:10 port 45 already exported
2000-01-01 00:00:10 port 46 already exported
2000-01-01 00:00:10 port 26 already exported
2000-01-01 00:00:10 Note: front fan is power on!
2000-01-01 00:00:10 Note: rear fan is power on!
2000-01-01 00:00:10 start the http log.
2000-01-01 00:00:10 httpListenThread start ret=0
2000-01-01 00:00:10 start listen on 6060 ...
2000-01-01 00:00:11 load machine BHB42601 conf
2000-01-01 00:00:11 machine : BHB42601 
2000-01-01 00:00:11 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
2000-01-01 00:00:16 ==========================capability start==========================
2000-01-01 00:00:16 board num = 3
2000-01-01 00:00:16 board id = 0, chain num = 1
2000-01-01 00:00:16     chain id = 0
2000-01-01 00:00:16 board id = 1, chain num = 1
2000-01-01 00:00:16     chain id = 1
2000-01-01 00:00:16 board id = 2, chain num = 1
2000-01-01 00:00:16     chain id = 2
2000-01-01 00:00:16 ==========================capability end============================
2000-01-01 00:00:16 chain num = 3
2000-01-01 00:00:16 load chain 0 eeprom data
2000-01-01 00:00:16 board_info_version = 4
2000-01-01 00:00:16 algorithm_and_key_version = 0x11
2000-01-01 00:00:16 board_sn = YDFTYNGBAAAJE0C92
2000-01-01 00:00:16 chip_die = ED
2000-01-01 00:00:16 chip_marking = E1C021CA13
2000-01-01 00:00:16 chip_bin = 4
2000-01-01 00:00:16 ft_version = F1V05B2C1
2000-01-01 00:00:16 pcb_version = 0x120
2000-01-01 00:00:16 bom_version = 0x10
2000-01-01 00:00:16 asic_sensor_type = 0x0
2000-01-01 00:00:16 asic_sensor_addr[0] = 0x0
2000-01-01 00:00:16 asic_sensor_addr[1] = 0x0
2000-01-01 00:00:16 asic_sensor_addr[2] = 0x0
2000-01-01 00:00:16 asic_sensor_addr[3] = 0x0
2000-01-01 00:00:16 pic_sensor_type = 0x8a
2000-01-01 00:00:16 pic_sensor_addr = 0xf
2000-01-01 00:00:16 chip_tech = AC
2000-01-01 00:00:16 board_name = BHB42601
2000-01-01 00:00:16 factory_job = YDFT20211104002-Y1
2000-01-01 00:00:16 board_info_crc = 0x14
2000-01-01 00:00:16 voltage = 1340
2000-01-01 00:00:16 frequency = 505
2000-01-01 00:00:16 nonce_rate = 9991
2000-01-01 00:00:16 pcb_temp_in = 28
2000-01-01 00:00:16 pcb_temp_out = 29
2000-01-01 00:00:16 test_version = 1
2000-01-01 00:00:16 test_standard = 0
2000-01-01 00:00:16 param_info_crc = 0x12
2000-01-01 00:00:16 pt1_result = 1
2000-01-01 00:00:16 pt1_count = 1
2000-01-01 00:00:16 pt2_result = 1
2000-01-01 00:00:16 pt2_count = 1
2023-06-08 22:11:05 load chain 1 eeprom data
2023-06-08 22:11:05 board_info_version = 4
2023-06-08 22:11:05 algorithm_and_key_version = 0x11
2023-06-08 22:11:05 board_sn = YDFTYNGBAAAJE0CJV
2023-06-08 22:11:05 chip_die = ED
2023-06-08 22:11:05 chip_marking = S1CX21CF12
2023-06-08 22:11:05 chip_bin = 4
2023-06-08 22:11:05 ft_version = F1V05B2C1
2023-06-08 22:11:05 pcb_version = 0x120
2023-06-08 22:11:05 bom_version = 0x10
2023-06-08 22:11:05 asic_sensor_type = 0x0
2023-06-08 22:11:05 asic_sensor_addr[0] = 0x0
2023-06-08 22:11:05 asic_sensor_addr[1] = 0x0
2023-06-08 22:11:05 asic_sensor_addr[2] = 0x0
2023-06-08 22:11:05 asic_sensor_addr[3] = 0x0
2023-06-08 22:11:05 pic_sensor_type = 0x8a
2023-06-08 22:11:05 pic_sensor_addr = 0xf
2023-06-08 22:11:05 chip_tech = AC
2023-06-08 22:11:05 board_name = BHB42601
2023-06-08 22:11:05 factory_job = YDFT20211104002-Y1
2023-06-08 22:11:05 board_info_crc = 0x1d
2023-06-08 22:11:05 voltage = 1340
2023-06-08 22:11:05 frequency = 505
2023-06-08 22:11:05 nonce_rate = 9996
2023-06-08 22:11:05 pcb_temp_in = 26
2023-06-08 22:11:05 pcb_temp_out = 31
2023-06-08 22:11:05 test_version = 1
2023-06-08 22:11:05 test_standard = 0
2023-06-08 22:11:05 param_info_crc = 0x2
2023-06-08 22:11:05 pt1_result = 1
2023-06-08 22:11:05 pt1_count = 1
2023-06-08 22:11:05 pt2_result = 1
2023-06-08 22:11:05 pt2_count = 1
2023-06-08 22:11:06 load chain 2 eeprom data
2023-06-08 22:11:06 board_info_version = 4
2023-06-08 22:11:06 algorithm_and_key_version = 0x11
2023-06-08 22:11:06 board_sn = YDFTYNGBAAAJE0C90
2023-06-08 22:11:06 chip_die = ED
2023-06-08 22:11:06 chip_marking = E1C021CA13
2023-06-08 22:11:06 chip_bin = 4
2023-06-08 22:11:06 ft_version = F1V05B2C1
2023-06-08 22:11:06 pcb_version = 0x120
2023-06-08 22:11:06 bom_version = 0x10
2023-06-08 22:11:06 asic_sensor_type = 0x0
2023-06-08 22:11:06 asic_sensor_addr[0] = 0x0
2023-06-08 22:11:06 asic_sensor_addr[1] = 0x0
2023-06-08 22:11:06 asic_sensor_addr[2] = 0x0
2023-06-08 22:11:06 asic_sensor_addr[3] = 0x0
2023-06-08 22:11:06 pic_sensor_type = 0x8a
2023-06-08 22:11:06 pic_sensor_addr = 0xf
2023-06-08 22:11:06 chip_tech = AC
2023-06-08 22:11:06 board_name = BHB42601
2023-06-08 22:11:06 factory_job = YDFT20211104002-Y1
2023-06-08 22:11:06 board_info_crc = 0x5
2023-06-08 22:11:06 voltage = 1340
2023-06-08 22:11:06 frequency = 505
2023-06-08 22:11:06 nonce_rate = 9998
2023-06-08 22:11:06 pcb_temp_in = 28
2023-06-08 22:11:06 pcb_temp_out = 28
2023-06-08 22:11:06 test_version = 1
2023-06-08 22:11:06 test_standard = 0
2023-06-08 22:11:06 param_info_crc = 0x18
2023-06-08 22:11:06 pt1_result = 1
2023-06-08 22:11:06 pt1_count = 1
2023-06-08 22:11:06 pt2_result = 1
2023-06-08 22:11:06 pt2_count = 1
2023-06-08 22:11:06 fan_eft : 0  fan_pwm : 100
2023-06-08 22:11:06 create thread get_nonce_and_register_thread
2023-06-08 22:11:06 fixed working voltage = 1340
2023-06-08 22:11:06 Chain [0] PCB Version: 0x0120
2023-06-08 22:11:06 Chain [0] BOM Version: 0x0010
2023-06-08 22:11:06 Chain [1] PCB Version: 0x0120
2023-06-08 22:11:06 Chain [1] BOM Version: 0x0010
2023-06-08 22:11:06 Chain [2] PCB Version: 0x0120
2023-06-08 22:11:06 Chain [2] BOM Version: 0x0010
2023-06-08 22:11:06 Fan check passed.
2023-06-08 22:11:06 uart_trans addr:0xb6cab000.
2023-06-08 22:11:07 chain[0] PIC jump to app
2023-06-08 22:11:08 Check chain[0] PIC fw version=0x89
2023-06-08 22:11:09 chain[1] PIC jump to app
2023-06-08 22:11:11 Check chain[1] PIC fw version=0x89
2023-06-08 22:11:12 chain[2] PIC jump to app
2023-06-08 22:11:13 Check chain[2] PIC fw version=0x89
2023-06-08 22:11:13 create thread pic_heart_beat_thread
2023-06-08 22:11:13 max sensor num = 4
2023-06-08 22:11:13 i2c_sim_init start
2023-06-08 22:11:13 temperature_monitor_thread start...
2023-06-08 22:11:13 i2c_sim_init end
2023-06-08 22:11:15 power open power_version = 0x74
2023-06-08 22:11:16 power type version: 0x0074
2023-06-08 22:11:16 power type version error
2023-06-08 22:11:16 Sweep error string = V:1.
2023-06-08 22:11:16 ERROR_POWER_LOST: get power type version failed!
2023-06-08 22:11:16 stop_mining: get power type version failed!
2023-06-08 22:11:16 uninit_temp_info
2023-06-08 22:11:16 do not read temp anymore...
2023-06-08 22:11:16 cancel thread
2023-06-08 22:11:16 cancel thread
2023-06-08 22:11:16 ****power off hashboard****
2023-06-08 22:11:16 temp monitor thread exit
2023-06-08 22:11:20 start to init...
2023-06-08 22:11:20 Version num 65536
2023-06-08 22:11:20 Mask num 0x1fffe000
2023-06-08 22:11:20 Note: addrInterval or corenum is not initialized.
2023-06-08 22:11:20 ERROR_SOC_INIT: soc init failed!
2023-06-08 22:11:20 stop_mining: soc init failed!
2023-06-08 22:11:20 ****

After Factory reset

Pool Connection Status Normal (x3)

LOG:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13+ (jenkins@nomd-nomd-fwc-bj) (gcc version 4.9.4 (Linaro GCC 4.9-2017.01) ) #28 SMP Tue Jun 22 17:32:38 CST 2021
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c05d9000, node_mem_map c0631000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c083e000 s9856 r8192 d14720 u32768
[    0.000000] pcpu-alloc: s9856 r8192 d14720 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 245448k/245448k available, 16696k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc053f674   (5342 kB)
[    0.000000]       .init : 0xc0540000 - 0xc0571680   ( 198 kB)
[    0.000000]       .data : 0xc0572000 - 0xc05d9ee0   ( 416 kB)
[    0.000000]        .bss : 0xc05d9ee0 - 0xc0630448   ( 346 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000346] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015445] pid_max: default: 32768 minimum: 301
[    0.015667] Security Framework initialized
[    0.015759] Mount-cache hash table entries: 512
[    0.024253] Initializing cgroup subsys cpuacct
[    0.024285] Initializing cgroup subsys memory
[    0.024347] Initializing cgroup subsys blkio
[    0.024479] CPU: Testing write buffer coherency: ok
[    0.024989] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025063] Setting up static identity map for 0x8030a500 - 0x8030a54c
[    0.026425] Brought up 1 CPUs
[    0.026449] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.027729] devtmpfs: initialized
[    0.091319] pinctrl core: initialized pinctrl subsystem
[    0.091532] rstctl core: initialized rstctl subsystem
[    0.092042] regulator-dummy: no parameters
[    0.092546] NET: Registered protocol family 16
[    0.093202] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.102613] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.102788] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.103836] platform 49000000.edma: alias fck already exists
[    0.103865] platform 49000000.edma: alias fck already exists
[    0.103890] platform 49000000.edma: alias fck already exists
[    0.105008] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.105187] OMAP GPIO hardware version 0.1
[    0.106559] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.107856] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.109160] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.109810] of_get_named_gpio_flags exited with status 52
[    0.109840] gpio-rctrl rstctl.3: loaded OK
[    0.114690] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.117931] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.119822] cpsw.0: No hwaddr in dt. Using 58:7a:62:8e:46:1b from efuse
[    0.128659] bio: create slab <bio-0> at 0
[    0.140158] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.140405] of_get_named_gpio_flags: can't parse gpios property
[    0.140674] vmmcsd_fixed: 3300 mV 
[    0.143785] SCSI subsystem initialized
[    0.145013] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.145044] omap_i2c 4819c000.i2c: unable to select pin group
[    0.145276] pps_core: LinuxPPS API ver. 1 registered
[    0.145292] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.146881] Switching to clocksource gp_timer
[    0.164089] NET: Registered protocol family 2
[    0.165141] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.165228] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.165322] TCP: Hash tables configured (established 2048 bind 2048)
[    0.165413] TCP: reno registered
[    0.165438] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.165482] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.165890] NET: Registered protocol family 1
[    0.166451] RPC: Registered named UNIX socket transport module.
[    0.166530] RPC: Registered udp transport module.
[    0.166545] RPC: Registered tcp transport module.
[    0.166559] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.166941] Trying to unpack rootfs image as initramfs...
[    1.055449] Freeing initrd memory: 6448K
[    1.056079] CPU PMU: probing PMU on CPU 0
[    1.056112] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.056623] omap2_mbox_probe: platform not supported
[    1.060369] VFS: Disk quotas dquot_6.5.2
[    1.060613] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.062012] NFS: Registering the id_resolver key type
[    1.062113] Key type id_resolver registered
[    1.062130] Key type id_legacy registered
[    1.062195] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.062635] msgmni has been set to 491
[    1.065454] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.065480] io scheduler noop registered
[    1.065496] io scheduler deadline registered
[    1.065551] io scheduler cfq registered (default)
[    1.069253] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.071505] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.071529] of_get_named_gpio_flags: can't parse gpios property
[    1.071808] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    1.692800] console [ttyO0] enabled
[    1.697085] of_get_named_gpio_flags: can't parse gpios property
[    1.697337] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    1.705794] of_get_named_gpio_flags: can't parse gpios property
[    1.706011] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    1.714394] of_get_named_gpio_flags: can't parse gpios property
[    1.714602] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    1.723001] of_get_named_gpio_flags: can't parse gpios property
[    1.723264] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    1.745154] brd: module loaded
[    1.755421] loop: module loaded
[    1.759456] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    1.769508] ONFI param page 0 valid
[    1.773224] ONFI flash detected
[    1.776548] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[    1.788477] omap2-nand: detected x8 NAND flash
[    1.793143] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    1.798728] omap2-nand: using custom ecc layout
[    1.803579] 12 ofpart partitions found on MTD device omap2-nand.0
[    1.809979] Creating 12 MTD partitions on "omap2-nand.0":
[    1.815660] 0x000000000000-0x000000020000 : "spl"
[    1.822332] 0x000000020000-0x000000040000 : "spl_backup1"
[    1.829670] 0x000000040000-0x000000060000 : "spl_backup2"
[    1.837024] 0x000000060000-0x000000080000 : "spl_backup3"
[    1.844349] 0x000000080000-0x000000240000 : "u-boot"
[    1.852685] 0x000000240000-0x000000260000 : "bootenv"
[    1.859639] 0x000000260000-0x000000280000 : "fdt"
[    1.866276] 0x000000280000-0x000000780000 : "kernel"
[    1.877253] 0x000000800000-0x000001c00000 : "root"
[    1.900969] 0x000001c00000-0x000001e00000 : "config"
[    1.909414] 0x000001e00000-0x000002000000 : "sig"
[    1.917618] 0x000002000000-0x000008000000 : "nvdata"
[    2.007011] OneNAND driver initializing
[    2.013420] mousedev: PS/2 mouse device common for all mice
[    2.021127] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    2.028624] 44e3e000.rtc: already running
[    2.033127] i2c /dev entries driver
[    2.037431] pps_ldisc: PPS line discipline registered
[    2.042921] Driver for 1-wire Dallas network protocol.
[    2.050185] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    2.057758] cpuidle: using governor ladder
[    2.062089] cpuidle: using governor menu
[    2.066664] of_get_named_gpio_flags exited with status 6
[    2.066682] of_get_named_gpio_flags: can't parse gpios property
[    2.066697] of_get_named_gpio_flags: can't parse gpios property
[    2.066732] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    2.073964] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    2.080800] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    2.088016] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    2.095337] mmc.4 supply vmmc_aux not found, using dummy regulator
[    2.102348] omap_hsmmc mmc.4: pins are not configured from the driver
[    2.135848] of_get_named_gpio_flags exited with status -517
[    2.135916] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    2.143694] ledtrig-cpu: registered to indicate activity on CPUs
[    2.150464] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    2.157661] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    2.165705] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    2.171997] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    2.179179] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    2.187490] nf_conntrack version 0.5.0 (3935 buckets, 15740 max)
[    2.194970] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.200750] TCP: cubic registered
[    2.204296] Initializing XFRM netlink socket
[    2.208929] NET: Registered protocol family 10
[    2.215028] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.220985] NET: Registered protocol family 17
[    2.225756] NET: Registered protocol family 15
[    2.230576] Key type dns_resolver registered
[    2.235153] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    2.243232] ThumbEE CPU extension supported.
[    2.247750] Registering SWP/SWPB emulation handler
[    2.253843] registered taskstats version 1
[    2.259614] of_get_named_gpio_flags exited with status -517
[    2.259683] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    2.316953] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    2.323369] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    2.338182] libphy: 4a101000.mdio: probed
[    2.342532] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    2.352615] of_get_named_gpio_flags exited with status -517
[    2.352678] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    2.360165] Detected MACID = 58:7a:62:8e:46:1b
[    2.364849] cpsw 4a100000.ethernet: NAPI disabled
[    2.371834] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    2.381012] cpu0 supply cpu0 not found, using dummy regulator
[    2.387496] cpufreq_cpu0: failed to scale voltage up: -22
[    2.393321] cpufreq_cpu0: failed to scale voltage up: -22
[    2.407026] Freeing init memory: 196K
[    2.487701] devpts: called with bogus options
[    2.907442] jffs2: notice: (109) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.215976] jffs2: notice: (115) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.663468] net eth0: initializing cpsw version 1.12 (0)
[    5.671749] net eth0: phy found : id is : 0x7c0f1
[    5.684094] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.747183] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[    8.753377] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.266081] register uart_trans chrdev success.
[   11.271601] tty port open success [/dev/ttyO1]!
[   11.276636] init sucess for tty struct (249:1)  [/dev/ttyO1]
[   11.283011] tty port open success [/dev/ttyO2]!
[   11.288008] init sucess for tty struct (249:2)  [/dev/ttyO2]
[   11.294361] tty port open success [/dev/ttyO4]!
[   11.299363] init sucess for tty struct (249:4)  [/dev/ttyO4]
[   11.305789] tty port open success [/dev/ttyO5]!
[   11.310725] init sucess for tty struct (249:5)  [/dev/ttyO5]
[   19.691580] uart trans dev open.
[   19.695265] uart_buf virt addr = 0xccd80000
[   19.699850] uart_buf phys addr = 0x8cd80000
[   19.704400] uart_buf pfn       = 0x0008cd80
[   19.710407] uart trans stop send work timer.
[   19.715641] uart trans set chain exist bits:0x7.
[   19.720736] uart trans set work queue count 768.
[   32.759715] uart trans start send work timer.
[   33.925552] uart trans stop send work timer.
[   37.842966] uart trans stop send work timer.
[   60.634442] uart trans start send work timer.

===========================================Miner log===========================================
2000-01-01 00:00:09 Miner compile time: Tue Jun 22 17:45:49 CST 2021 type: Antminer S19j Pro
2000-01-01 00:00:10 This is fix-freq version
2000-01-01 00:00:10 Miner compile time: Tue Jun 22 17:45:49 CST 2021 type: Antminer S19j Pro
2000-01-01 00:00:10 commit åversion: 93c0f7a 2021-06-22 17:54:06, build by: jenkins 2021-06-22 17:59:34
2000-01-01 00:00:10 opt_multi_version     = 1
2000-01-01 00:00:10 opt_bitmain_ab        = 1
2000-01-01 00:00:10 mid_auto_gen          = 1
2000-01-01 00:00:10 opt_bitmain_work_mode = 0
2000-01-01 00:00:10 port 51 already exported
2000-01-01 00:00:10 port 49 already exported
2000-01-01 00:00:10 port 48 already exported
2000-01-01 00:00:10 port 60 already exported
2000-01-01 00:00:10 port 47 already exported
2000-01-01 00:00:10 port 27 already exported
2000-01-01 00:00:10 port 44 already exported
2000-01-01 00:00:10 port 22 already exported
2000-01-01 00:00:10 no board pluged in socket 44
2000-01-01 00:00:10 port 23 already exported
2000-01-01 00:00:10 port 45 already exported
2000-01-01 00:00:10 port 46 already exported
2000-01-01 00:00:10 port 26 already exported
2000-01-01 00:00:10 Note: front fan is power on!
2000-01-01 00:00:10 Note: rear fan is power on!
2000-01-01 00:00:10 start the http log.
2000-01-01 00:00:10 httpListenThread start ret=0
2000-01-01 00:00:10 start listen on 6060 ...
2000-01-01 00:00:10 load machine BHB42601 conf
2000-01-01 00:00:10 machine : BHB42601 
2000-01-01 00:00:10 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
2000-01-01 00:00:15 ==========================capability start==========================
2000-01-01 00:00:15 board num = 3
2000-01-01 00:00:15 board id = 0, chain num = 1
2000-01-01 00:00:15     chain id = 0
2000-01-01 00:00:15 board id = 1, chain num = 1
2000-01-01 00:00:15     chain id = 1
2000-01-01 00:00:15 board id = 2, chain num = 1
2000-01-01 00:00:15     chain id = 2
2000-01-01 00:00:15 ==========================capability end============================
2000-01-01 00:00:15 chain num = 3
2000-01-01 00:00:16 load chain 0 eeprom data
2000-01-01 00:00:16 board_info_version = 4
2000-01-01 00:00:16 algorithm_and_key_version = 0x11
2000-01-01 00:00:16 board_sn = YDFTYNGBAAAJE0C92
2000-01-01 00:00:16 chip_die = ED
2000-01-01 00:00:16 chip_marking = E1C021CA13
2000-01-01 00:00:16 chip_bin = 4
2000-01-01 00:00:16 ft_version = F1V05B2C1
2000-01-01 00:00:16 pcb_version = 0x120
2000-01-01 00:00:16 bom_version = 0x10
2000-01-01 00:00:16 asic_sensor_type = 0x0
2000-01-01 00:00:16 asic_sensor_addr[0] = 0x0
2000-01-01 00:00:16 asic_sensor_addr[1] = 0x0
2000-01-01 00:00:16 asic_sensor_addr[2] = 0x0
2000-01-01 00:00:16 asic_sensor_addr[3] = 0x0
2000-01-01 00:00:16 pic_sensor_type = 0x8a
2000-01-01 00:00:16 pic_sensor_addr = 0xf
2000-01-01 00:00:16 chip_tech = AC
2000-01-01 00:00:16 board_name = BHB42601
2000-01-01 00:00:16 factory_job = YDFT20211104002-Y1
2000-01-01 00:00:16 board_info_crc = 0x14
2000-01-01 00:00:16 voltage = 1340
2000-01-01 00:00:16 frequency = 505
2000-01-01 00:00:16 nonce_rate = 9991
2000-01-01 00:00:16 pcb_temp_in = 28
2000-01-01 00:00:16 pcb_temp_out = 29
2000-01-01 00:00:16 test_version = 1
2000-01-01 00:00:16 test_standard = 0
2000-01-01 00:00:16 param_info_crc = 0x12
2000-01-01 00:00:16 pt1_result = 1
2000-01-01 00:00:16 pt1_count = 1
2000-01-01 00:00:16 pt2_result = 1
2000-01-01 00:00:16 pt2_count = 1
2000-01-01 00:00:17 load chain 1 eeprom data
2000-01-01 00:00:17 board_info_version = 4
2000-01-01 00:00:17 algorithm_and_key_version = 0x11
2000-01-01 00:00:17 board_sn = YDFTYNGBAAAJE0CJV
2000-01-01 00:00:17 chip_die = ED
2000-01-01 00:00:17 chip_marking = S1CX21CF12
2000-01-01 00:00:17 chip_bin = 4
2000-01-01 00:00:17 ft_version = F1V05B2C1
2000-01-01 00:00:17 pcb_version = 0x120
2000-01-01 00:00:17 bom_version = 0x10
2000-01-01 00:00:17 asic_sensor_type = 0x0
2000-01-01 00:00:17 asic_sensor_addr[0] = 0x0
2000-01-01 00:00:17 asic_sensor_addr[1] = 0x0
2000-01-01 00:00:17 asic_sensor_addr[2] = 0x0
2000-01-01 00:00:17 asic_sensor_addr[3] = 0x0
2000-01-01 00:00:17 pic_sensor_type = 0x8a
2000-01-01 00:00:17 pic_sensor_addr = 0xf
2000-01-01 00:00:17 chip_tech = AC
2000-01-01 00:00:17 board_name = BHB42601
2000-01-01 00:00:17 factory_job = YDFT20211104002-Y1
2000-01-01 00:00:17 board_info_crc = 0x1d
2000-01-01 00:00:17 voltage = 1340
2000-01-01 00:00:17 frequency = 505
2000-01-01 00:00:17 nonce_rate = 9996
2000-01-01 00:00:17 pcb_temp_in = 26
2000-01-01 00:00:17 pcb_temp_out = 31
2000-01-01 00:00:17 test_version = 1
2000-01-01 00:00:17 test_standard = 0
2000-01-01 00:00:17 param_info_crc = 0x2
2000-01-01 00:00:17 pt1_result = 1
2000-01-01 00:00:17 pt1_count = 1
2000-01-01 00:00:17 pt2_result = 1
2000-01-01 00:00:17 pt2_count = 1
2000-01-01 00:00:17 load chain 2 eeprom data
2000-01-01 00:00:17 board_info_version = 4
2000-01-01 00:00:17 algorithm_and_key_version = 0x11
2000-01-01 00:00:17 board_sn = YDFTYNGBAAAJE0C90
2000-01-01 00:00:17 chip_die = ED
2000-01-01 00:00:17 chip_marking = E1C021CA13
2000-01-01 00:00:17 chip_bin = 4
2000-01-01 00:00:17 ft_version = F1V05B2C1
2000-01-01 00:00:17 pcb_version = 0x120
2000-01-01 00:00:17 bom_version = 0x10
2000-01-01 00:00:17 asic_sensor_type = 0x0
2000-01-01 00:00:17 asic_sensor_addr[0] = 0x0
2000-01-01 00:00:17 asic_sensor_addr[1] = 0x0
2000-01-01 00:00:17 asic_sensor_addr[2] = 0x0
2000-01-01 00:00:17 asic_sensor_addr[3] = 0x0
2000-01-01 00:00:17 pic_sensor_type = 0x8a
2000-01-01 00:00:17 pic_sensor_addr = 0xf
2000-01-01 00:00:17 chip_tech = AC
2000-01-01 00:00:17 board_name = BHB42601
2000-01-01 00:00:17 factory_job = YDFT20211104002-Y1
2000-01-01 00:00:17 board_info_crc = 0x5
2000-01-01 00:00:17 voltage = 1340
2000-01-01 00:00:17 frequency = 505
2000-01-01 00:00:17 nonce_rate = 9998
2000-01-01 00:00:17 pcb_temp_in = 28
2000-01-01 00:00:17 pcb_temp_out = 28
2000-01-01 00:00:17 test_version = 1
2000-01-01 00:00:17 test_standard = 0
2000-01-01 00:00:17 param_info_crc = 0x18
2000-01-01 00:00:17 pt1_result = 1
2000-01-01 00:00:17 pt1_count = 1
2000-01-01 00:00:17 pt2_result = 1
2000-01-01 00:00:17 pt2_count = 1
2000-01-01 00:00:17 fan_eft : 0  fan_pwm : 100
2000-01-01 00:00:17 create thread get_nonce_and_register_thread
2000-01-01 00:00:17 fixed working voltage = 1340
2000-01-01 00:00:17 Chain [0] PCB Version: 0x0120
2000-01-01 00:00:17 Chain [0] BOM Version: 0x0010
2000-01-01 00:00:17 Chain [1] PCB Version: 0x0120
2000-01-01 00:00:17 Chain [1] BOM Version: 0x0010
2000-01-01 00:00:17 Chain [2] PCB Version: 0x0120
2000-01-01 00:00:17 Chain [2] BOM Version: 0x0010
2000-01-01 00:00:17 Fan check passed.
2000-01-01 00:00:17 uart_trans addr:0xb6c4c000.
2000-01-01 00:00:18 chain[0] PIC jump to app
2023-06-09 23:19:42 Check chain[0] PIC fw version=0x89
2023-06-09 23:19:43 chain[1] PIC jump to app
2023-06-09 23:19:45 Check chain[1] PIC fw version=0x89
2023-06-09 23:19:46 chain[2] PIC jump to app
2023-06-09 23:19:47 Check chain[2] PIC fw version=0x89
2023-06-09 23:19:48 create thread pic_heart_beat_thread
2023-06-09 23:19:48 max sensor num = 4
2023-06-09 23:19:48 i2c_sim_init start
2023-06-09 23:19:48 temperature_monitor_thread start...
2023-06-09 23:19:48 i2c_sim_init end
2023-06-09 23:19:49 power open power_version = 0x74
2023-06-09 23:19:50 power type version: 0x0074
2023-06-09 23:19:50 power type version error
2023-06-09 23:19:50 Sweep error string = V:1.
2023-06-09 23:19:50 ERROR_POWER_LOST: get power type version failed!
2023-06-09 23:19:50 stop_mining: get power type version failed!
2023-06-09 23:19:50 uninit_temp_info
2023-06-09 23:19:50 do not read temp anymore...
2023-06-09 23:19:50 cancel thread
2023-06-09 23:19:50 cancel thread
2023-06-09 23:19:50 ****power off hashboard****
2023-06-09 23:19:51 temp monitor thread exit
2023-06-09 23:19:53 start to init...
2023-06-09 23:19:53 Version num 65536
2023-06-09 23:19:53 Mask num 0x1fffe000
2023-06-09 23:19:53 Note: addrInterval or corenum is not initialized.
2023-06-09 23:19:54 ERROR_SOC_INIT: soc init failed!
2023-06-09 23:19:54 stop_mining: soc init failed!
2023-06-09 23:19:54 ****power off hashboard****

Looking forward for your suggestions

Thanks