Antminer E9 PRO -r ead sensor failed

评论

3 条评论

    I did a Restore Factory settings, to see if I get the error again.

     

    Well I got the erorr again: 

     

    time="2023-03-27 10:50:59" level=fatal pid=1554 chain=0 msg="read temp error! pcb temp count 0 chip temp count 0 uneffective value count 16"
    time="2023-03-27 10:50:59" level=error pid=1554 msg="Sweep error string = J0:6."
    time="2023-03-27 10:50:59" level=fatal pid=1554 chain=0 msg="read no sensor pcb temp exceed limit! (3)"
    time="2023-03-27 10:50:59" level=fatal pid=1554 chain=0 msg="read no sensor chip temp exceed limit! (3)"
    time="2023-03-27 10:50:59" level=fatal pid=1554 chain=0 msg="uneffective temp exceed limit (3), uneffective_value_count = 16!"
    0
    评论操作 固定链接

    It seems that the problem was electrical outlet, I changed it and everything is fine now! 

    0
    评论操作 固定链接

    Dear Customer,

    If you have any questions please feel free to contact us.

    Please send email to customersupport@bitmain.com

    We will reply to your question as soon as possible.

    0
    评论操作 固定链接

请先登录再写评论。