I need flash file for bitmain s19 pro 96th/s with Ctrl board IO+BB
-
正式评论
Dear customer.
here is information for you.
Flashing SD card instruction for S19 Pro:
https://support.bitmain.com/hc/en-us/articles/900003100743-S19-S19-Pro-control-board-program-recovery-SD-card-flashing-Flashing SD card documents:
https://file12.bitmain.com/shop-product/firmware/db4cfe10-1cf4-4e21-8637-bd804b51f967/2020/09/27/10/sd-recover-bmu-S19Pro-fixed-202006012027-release.zip评论操作 -
Dear Customer,
If you have any questions please feel free to contact us.
Please send email to customersupport@bitmain.com
We will reply to your question as soon as possible.
-
Flashing SD card instruction for S19j:
https://support.bitmain.com/hc/en-us/articles/4404919472281-S19j-S19j-Pro-control-board-program-recovery-SD-card-flashing-Flashing SD card documents:
S19j SD firmware for BB control board
https://file12.bitmain.com/shop-product-s3/firmware/0befb3c8-9bfd-4dc6-b4c4-623ca3889c72/2021/08/26/10/Antminer-S19j-Release-sd2nand-BBCtrl-20210622.zipS19j SD firmware for 7007 control board
https://file12.bitmain.com/shop-product-s3/firmware/4b66072f-a86b-42cb-9402-17f465fdc442/2021/08/26/11/Antminer-S19j-Release-sd2nand-zynq7007-20210523.zip -
Dear Customer,
If you have any questions please feel free to contact us.
Please send email to customersupport@bitmain.com
We will reply to your question as soon as possible.
-
Hi, this firmware does not work on this miner. Here is the clog:
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.13+ (jenkins@nomd-nomd-fwc-bj) (gcc version 4.9.4 (Linaro GCC 4.9-2017.01) ) #1 SMP Tue Jun 22 17:40:42 CST 2021 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c05d9000, node_mem_map c0631000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 64768 pages, LIFO batch:15 [ 0.000000] AM335X ES1.0 (neon ) [ 0.000000] PERCPU: Embedded 8 pages/cpu @c083e000 s9856 r8192 d14720 u32768 [ 0.000000] pcpu-alloc: s9856 r8192 d14720 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768 [ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] allocated 524288 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 255MB = 255MB total [ 0.000000] Memory: 245448k/245448k available, 16696k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB) [ 0.000000] .text : 0xc0008000 - 0xc053e674 (5338 kB) [ 0.000000] .init : 0xc053f000 - 0xc0570680 ( 198 kB) [ 0.000000] .data : 0xc0572000 - 0xc05d9ee0 ( 416 kB) [ 0.000000] .bss : 0xc05d9ee0 - 0xc0630448 ( 346 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000344] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968) [ 0.015447] pid_max: default: 32768 minimum: 301 [ 0.015672] Security Framework initialized [ 0.015764] Mount-cache hash table entries: 512 [ 0.024265] Initializing cgroup subsys cpuacct [ 0.024296] Initializing cgroup subsys memory [ 0.024357] Initializing cgroup subsys blkio [ 0.024484] CPU: Testing write buffer coherency: ok [ 0.024994] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.025068] Setting up static identity map for 0x8030a500 - 0x8030a54c [ 0.026432] Brought up 1 CPUs [ 0.026456] SMP: Total of 1 processors activated (545.07 BogoMIPS). [ 0.027738] devtmpfs: initialized [ 0.091415] pinctrl core: initialized pinctrl subsystem [ 0.091662] rstctl core: initialized rstctl subsystem [ 0.092130] regulator-dummy: no parameters [ 0.092631] NET: Registered protocol family 16 [ 0.093288] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.102717] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle [ 0.102896] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.103947] platform 49000000.edma: alias fck already exists [ 0.103977] platform 49000000.edma: alias fck already exists [ 0.104002] platform 49000000.edma: alias fck already exists [ 0.105122] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.105346] OMAP GPIO hardware version 0.1 [ 0.106676] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.107984] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.109440] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.109958] of_get_named_gpio_flags exited with status 52 [ 0.109988] gpio-rctrl rstctl.3: loaded OK [ 0.114861] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.118106] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.120009] cpsw.0: No hwaddr in dt. Using 34:84:e4:1c:f6:1e from efuse [ 0.128923] bio: create slab <bio-0> at 0 [ 0.140349] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.140631] of_get_named_gpio_flags: can't parse gpios property [ 0.140856] vmmcsd_fixed: 3300 mV [ 0.143972] SCSI subsystem initialized [ 0.145206] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz [ 0.145238] omap_i2c 4819c000.i2c: unable to select pin group [ 0.145471] pps_core: LinuxPPS API ver. 1 registered [ 0.145488] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.147077] Switching to clocksource gp_timer [ 0.164284] NET: Registered protocol family 2 [ 0.165335] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.165423] TCP bind hash table entries: 2048 (order: 3, 40960 bytes) [ 0.165517] TCP: Hash tables configured (established 2048 bind 2048) [ 0.165611] TCP: reno registered [ 0.165637] UDP hash table entries: 256 (order: 1, 12288 bytes) [ 0.165680] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) [ 0.166090] NET: Registered protocol family 1 [ 0.166650] RPC: Registered named UNIX socket transport module. [ 0.166728] RPC: Registered udp transport module. [ 0.166743] RPC: Registered tcp transport module. [ 0.166757] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.167143] Trying to unpack rootfs image as initramfs... [ 1.056197] Freeing initrd memory: 6448K [ 1.056830] CPU PMU: probing PMU on CPU 0 [ 1.056861] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 1.057467] omap2_mbox_probe: platform not supported [ 1.061110] VFS: Disk quotas dquot_6.5.2 [ 1.061429] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.062734] NFS: Registering the id_resolver key type [ 1.062824] Key type id_resolver registered [ 1.062841] Key type id_legacy registered [ 1.062906] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.063422] msgmni has been set to 491 [ 1.066183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.066207] io scheduler noop registered [ 1.066224] io scheduler deadline registered [ 1.066280] io scheduler cfq registered (default) [ 1.070026] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.072305] omap_uart 44e09000.serial: did not get pins for uart0 error: -19 [ 1.072330] of_get_named_gpio_flags: can't parse gpios property [ 1.072612] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0 [ 1.693758] console [ttyO0] enabled [ 1.698079] of_get_named_gpio_flags: can't parse gpios property [ 1.698334] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1 [ 1.706750] of_get_named_gpio_flags: can't parse gpios property [ 1.706964] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2 [ 1.715358] of_get_named_gpio_flags: can't parse gpios property [ 1.715614] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4 [ 1.723999] of_get_named_gpio_flags: can't parse gpios property [ 1.724215] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5 [ 1.746117] brd: module loaded [ 1.756340] loop: module loaded [ 1.760383] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node [ 1.770508] ONFI param page 0 valid [ 1.774194] ONFI flash detected [ 1.777517] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABAEAWP), 128MiB, page size: 2048, OOB size: 64 [ 1.789446] omap2-nand: detected x8 NAND flash [ 1.794115] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme [ 1.799702] omap2-nand: using custom ecc layout [ 1.804553] 12 ofpart partitions found on MTD device omap2-nand.0 [ 1.810955] Creating 12 MTD partitions on "omap2-nand.0": [ 1.816643] 0x000000000000-0x000000020000 : "spl" [ 1.823342] 0x000000020000-0x000000040000 : "spl_backup1" [ 1.830629] 0x000000040000-0x000000060000 : "spl_backup2" [ 1.837983] 0x000000060000-0x000000080000 : "spl_backup3" [ 1.845310] 0x000000080000-0x000000240000 : "u-boot" [ 1.853582] 0x000000240000-0x000000260000 : "bootenv" [ 1.860583] 0x000000260000-0x000000280000 : "fdt" [ 1.867209] 0x000000280000-0x000000780000 : "kernel" [ 1.878121] 0x000000800000-0x000001c00000 : "root" [ 1.901470] 0x000001c00000-0x000001e00000 : "config" [ 1.909902] 0x000001e00000-0x000002000000 : "sig" [ 1.918052] 0x000002000000-0x000008000000 : "nvdata" [ 2.005748] OneNAND driver initializing [ 2.012154] mousedev: PS/2 mouse device common for all mice [ 2.019862] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 2.027374] 44e3e000.rtc: already running [ 2.031877] i2c /dev entries driver [ 2.036227] pps_ldisc: PPS line discipline registered [ 2.041740] Driver for 1-wire Dallas network protocol. [ 2.048966] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.056540] cpuidle: using governor ladder [ 2.060872] cpuidle: using governor menu [ 2.065487] of_get_named_gpio_flags exited with status 6 [ 2.065506] of_get_named_gpio_flags: can't parse gpios property [ 2.065521] of_get_named_gpio_flags: can't parse gpios property [ 2.065555] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed [ 2.072785] omap_hsmmc mmc.4: Failed to get rstctl; not using any [ 2.079597] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25 [ 2.086821] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24 [ 2.094146] mmc.4 supply vmmc_aux not found, using dummy regulator [ 2.101116] omap_hsmmc mmc.4: pins are not configured from the driver [ 2.136046] of_get_named_gpio_flags exited with status -517 [ 2.136113] platform gpio-leds.7: Driver leds-gpio requests probe deferral [ 2.143911] ledtrig-cpu: registered to indicate activity on CPUs [ 2.150709] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36 [ 2.157925] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 2.165980] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 2.172268] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5 [ 2.179450] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6 [ 2.187764] nf_conntrack version 0.5.0 (3935 buckets, 15740 max) [ 2.195232] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.201011] TCP: cubic registered [ 2.204557] Initializing XFRM netlink socket [ 2.209193] NET: Registered protocol family 10 [ 2.215297] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.221243] NET: Registered protocol family 17 [ 2.226015] NET: Registered protocol family 15 [ 2.230862] Key type dns_resolver registered [ 2.235447] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 2.243532] ThumbEE CPU extension supported. [ 2.248054] Registering SWP/SWPB emulation handler [ 2.254169] registered taskstats version 1 [ 2.259922] of_get_named_gpio_flags exited with status -517 [ 2.259991] platform gpio-leds.7: Driver leds-gpio requests probe deferral [ 2.317157] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.323576] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.338376] libphy: 4a101000.mdio: probed [ 2.342724] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.352816] of_get_named_gpio_flags exited with status -517 [ 2.352881] platform gpio-leds.7: Driver leds-gpio requests probe deferral [ 2.360366] Detected MACID = 34:84:e4:1c:f6:1e [ 2.365044] cpsw 4a100000.ethernet: NAPI disabled [ 2.372038] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.381220] cpu0 supply cpu0 not found, using dummy regulator [ 2.387709] cpufreq_cpu0: failed to scale voltage up: -22 [ 2.393533] cpufreq_cpu0: failed to scale voltage up: -22 [ 2.407243] Freeing init memory: 196K [ 2.487881] devpts: called with bogus options [ 2.913147] jffs2: notice: (109) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 4.571625] jffs2: Empty flash at 0x042e2420 ends at 0x042e2800 [ 4.628639] jffs2: Empty flash at 0x042e5b18 ends at 0x042e6000 [ 4.679029] jffs2: Empty flash at 0x042e93c8 ends at 0x042e9800 [ 4.699729] jffs2: Empty flash at 0x042f94b8 ends at 0x042f9800 [ 4.712043] jffs2: Empty flash at 0x042fd120 ends at 0x042fd800 [ 5.478918] jffs2: notice: (115) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 5.922004] net eth0: initializing cpsw version 1.12 (0) [ 5.931388] net eth0: phy found : id is : 0x7c0f1 [ 5.945784] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.009088] libphy: 4a101000.mdio:00 - Link is Up - 100/Full [ 9.015286] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.523196] register uart_trans chrdev success. [ 11.528666] tty port open success [/dev/ttyO1]! [ 11.533649] init sucess for tty struct (249:1) [/dev/ttyO1] [ 11.540043] tty port open success [/dev/ttyO2]! [ 11.545020] init sucess for tty struct (249:2) [/dev/ttyO2] [ 11.553766] tty port open success [/dev/ttyO4]! [ 11.559066] init sucess for tty struct (249:4) [/dev/ttyO4] [ 11.565480] tty port open success [/dev/ttyO5]! [ 11.570461] init sucess for tty struct (249:5) [/dev/ttyO5] ===========================================Miner log=========================================== 2000-01-01 00:00:09 Miner compile time: Tue Jun 22 17:51:21 CST 2021 type: Antminer S19j 2000-01-01 00:00:10 This is fix-freq version 2000-01-01 00:00:10 Miner compile time: Tue Jun 22 17:51:21 CST 2021 type: Antminer S19j 2000-01-01 00:00:10 commit åversion: 93c0f7a 2021-06-22 17:54:06, build by: jenkins 2021-06-22 18:58:21 2000-01-01 00:00:10 opt_multi_version = 1 2000-01-01 00:00:10 opt_bitmain_ab = 1 2000-01-01 00:00:10 mid_auto_gen = 1 2000-01-01 00:00:10 opt_bitmain_work_mode = 0 2000-01-01 00:00:10 port 51 already exported 2000-01-01 00:00:10 port 49 already exported 2000-01-01 00:00:10 port 48 already exported 2000-01-01 00:00:10 port 60 already exported 2000-01-01 00:00:10 port 47 already exported 2000-01-01 00:00:10 port 27 already exported 2000-01-01 00:00:10 port 44 already exported 2000-01-01 00:00:10 port 22 already exported 2000-01-01 00:00:10 no board pluged in socket 44 2000-01-01 00:00:10 port 23 already exported 2000-01-01 00:00:10 port 45 already exported 2000-01-01 00:00:10 port 46 already exported 2000-01-01 00:00:10 port 26 already exported 2000-01-01 00:00:10 Note: front fan is power on! 2000-01-01 00:00:10 Note: rear fan is power on! 2000-01-01 00:00:10 start the http log. 2000-01-01 00:00:10 httpListenThread start ret=0 2000-01-01 00:00:10 start listen on 6060 ... 2000-01-01 00:00:10 load machine BHB42701 conf 2000-01-01 00:00:10 machine : BHB42701 2000-01-01 00:00:10 chain_num 4, chain_domain_num 36, chain_asic_num 108, domain_asic_num 3 2000-01-01 00:00:15 ==========================capability start========================== 2000-01-01 00:00:15 board num = 3 2000-01-01 00:00:15 board id = 0, chain num = 1 2000-01-01 00:00:15 chain id = 0 2000-01-01 00:00:15 board id = 1, chain num = 1 2000-01-01 00:00:15 chain id = 1 2000-01-01 00:00:15 board id = 2, chain num = 1 2000-01-01 00:00:15 chain id = 2 2000-01-01 00:00:15 ==========================capability end============================ 2000-01-01 00:00:15 chain num = 3 2000-01-01 00:00:16 load chain 0 eeprom data 2000-01-01 00:00:16 FW type BHB42701, eeprom[0] shows BHB42651 2023-03-21 07:58:31 load chain 1 eeprom data 2023-03-21 07:58:31 FW type BHB42701, eeprom[1] shows BHB42651 2023-03-21 07:58:32 load chain 2 eeprom data 2023-03-21 07:58:32 FW type BHB42701, eeprom[2] shows BHB42651 2023-03-21 07:58:32 Sweep error string = J255:4. 2023-03-21 07:58:32 Fixture data load failed, exit. 2023-03-21 07:58:32 ERROR_SOC_INIT: basic init failed! 2023-03-21 07:58:32 stop_mining: basic init failed! 2023-03-21 07:58:32 ****power off hashboard**** 2023-03-21 07:58:33 fail to write 0:7 2023-03-21 07:58:33 fail to write 1:7 2023-03-21 07:58:33 fail to write 2:7 2023-03-21 07:58:33 fail to write 3:7 2023-03-21 07:58:33 fail to write 4:7 2023-03-21 07:58:33 fail to write 5:7 2023-03-21 07:58:33 fail to write 6:7 2023-03-21 07:58:33 fail to read 0:2 2023-03-21 07:58:33 fail to read 1:2 2023-03-21 07:58:33 _bitmain_pic_disable_dc_dc_common failed! read_back_data[0] = 0x00, read_back_data[1] = 0x00 2023-03-21 07:58:33 fail to write 0:7 2023-03-21 07:58:33 fail to write 1:7 2023-03-21 07:58:33 fail to write 2:7 2023-03-21 07:58:33 fail to write 3:7 2023-03-21 07:58:33 fail to write 4:7 2023-03-21 07:58:33 fail to write 5:7 2023-03-21 07:58:33 fail to write 6:7 2023-03-21 07:58:33 fail to read 0:2 2023-03-21 07:58:33 fail to read 1:2 2023-03-21 07:58:33 _bitmain_pic_disable_dc_dc_common failed! read_back_data[0] = 0x00, read_back_data[1] = 0x00 2023-03-21 07:58:33 fail to write 0:7 2023-03-21 07:58:33 fail to write 1:7 2023-03-21 07:58:33 fail to write 2:7 2023-03-21 07:58:33 fail to write 3:7 2023-03-21 07:58:33 fail to write 4:7 2023-03-21 07:58:33 fail to write 5:7 2023-03-21 07:58:33 fail to write 6:7 2023-03-21 07:58:34 fail to read 0:2 2023-03-21 07:58:34 fail to read 1:2 2023-03-21 07:58:34 _bitmain_pic_disable_dc_dc_common failed! read_back_data[0] = 0x00, read_back_data[1] = 0x00 2023-03-21 08:00:24 reload pool, need recalculate 2023-03-21 08:00:24 set_start_time_point total_tv_start_sys=132 total_tv_end_sys=133
请先登录再写评论。
评论
9 条评论