Unable to make backup control boards for S19J Pro 104 Th using your stock firmware releases
Using your firmware and instructions from ‘Nick’ my other control boards update but will not hash with the firmware provided here:https://support.bitmain.com/hc/en-us/community/posts/6395872409113-S19j-Pro-with-Fartory-firmware
My unit hashes fine on the A113D control board that came with it. Full log here: https://docs.google.com/document/d/1T5jWa850cFzePGqLAILze4L7iVCzCB_AD9RCibOp5wA/edit?usp=sharing
For the other two control boards they upgrade but in each case the firmware shutdown and will not hash.
7007 logs and notes: https://docs.google.com/document/d/1UVckSllFMcpqZ2UkB9SaKqU6qSOaaBQsonUcOVeSM8c/edit?usp=sharing
for the 7007: 2022-09-08 15:28:45 power type version: 0x0076
2022-09-08 15:28:45 power type version error
2022-09-08 15:28:45 Sweep error string = V:1.
2022-09-08 15:28:45 ERROR_POWER_LOST: get power type version failed!
2022-09-08 15:28:45 stop_mining: get power type version failed!
2022-09-08 15:28:45 ****power off hashboard****
BeagleBone full logs and notes: https://docs.google.com/document/d/1WSbeiHg-2H-uQ64t46pnV4EZ2TfA5vuEA2pf2in8vOY/edit?usp=sharing
for the BeagleBone: 2000-01-01 00:00:21 load chain 0 eeprom data
2000-01-01 00:00:21 FW type BHB42601, eeprom[0] shows BHB42651
2022-09-08 17:43:30 load chain 1 eeprom data
2022-09-08 17:43:30 FW type BHB42601, eeprom[1] shows BHB42651
2022-09-08 17:43:30 load chain 2 eeprom data
2022-09-08 17:43:30 FW type BHB42601, eeprom[2] shows BHB42651
2022-09-08 17:43:30 Sweep error string = J255:4.
2022-09-08 17:43:30 Fixture data load failed, exit.
2022-09-08 17:43:30 ERROR_SOC_INIT: basic init failed!
2022-09-08 17:43:30 stop_mining: basic init failed!
2022-09-08 17:43:30 ****power off hashboard****
-
Dear customer.
From the kernel log, it shows ERROR_POWER_LOST
please kindly exclude the issue by following steps:
1. Plugin and out the PSU cord.
2. Set miner to factory settings
How to set miner to factory settings
https://support.bitmain.com/hc/en-us/articles/115003595387-How-to-reset-miner-to-factory-settings-
3. Change the PSU
https://support.bitmain.com/hc/en-us/articles/115004339274--How-to-use-a-multimeter-to-test-PSU
https://support.bitmain.com/hc/en-us/articles/4809007246617-PSU-problems-and-solutions-apply-to-APW9-APW12-If there are still problems after the above steps, please send the latest kernel log and miner status.
We will double-check for you.
-
From the kernel log, it shows ERROR_SOC_INIT, please kindly exclude the issue by following steps:
1. Please Plugin and out the cable
2. Set miner to factory settings
How to set miner to factory settings
https://support.bitmain.com/hc/en-us/articles/115003595387-How-to-reset-miner-to-factory-settings-
3. Upgrade the latest firmwareIf there are still problems after the above steps, please send the latest kernel log and miner status.
We will double-check for you. -
Dear Customer,
If you have any questions please feel free to contact us.
We recommend that you go to https://support.bitmain.com/hc/en-us click Submit a request at the bottom of the website, and select the correct ticket type.
We will reply to your question as soon as possible. -
Nick, I submitted a ticket to aquire specific steps on the Beagle Bone. Which cable to unplug? Ethernet? If so what is the exact instructions. Also it is unclear whether the 9in1 merge is the latest firmware or should i use the S19Jpro+hydro BMU? Please provide very specific instruction otherwise there are variations in timing of reset. When do I reset? Do I use the SD image before or after reset.
-
We recommend that you go to https://support.bitmain.com/hc/en-us click Submit a request at the bottom of the website, and select the correct ticket type.
We will reply to your question as soon as possible.
请先登录再写评论。
评论
5 条评论