Brand new s19 out of box, 1 hashboard cant be detected
Hi, any advise what i could do to fix this issue? s19 90th brand new out of box. I've tried looking through Bitmain site for troubleshooting methods but cant come across anything that works.
[ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Jun 9 13:22:51 CST 2022 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] __reserved_mem_alloc_size, start:0x000000003e000000, end:0x0000000040000000, len:32 MiB [ 0.000000@0] failed to allocate memory for node linux,meson-fb, size:32 MB [ 0.000000@0] cma: Reserved 16 MiB at 0x000000000f000000 [ 0.000000@0] On node 0 totalpages: 65536 [ 0.000000@0] DMA zone: 1024 pages used for memmap [ 0.000000@0] DMA zone: 0 pages reserved [ 0.000000@0] DMA zone: 65536 pages, LIFO batch:15 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00ef53000 s64536 r8192 d29672 u102400 [ 0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096 [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64512 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 rootfstype=ramfs init=/sbin/init [ 0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000000@0] Memory: 211704K/262144K available (8764K kernel code, 1194K rwdata, 2424K rodata, 3648K init, 1017K bss, 29960K reserved, 20480K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009910000 ( 8768 KB) [ 0.000000@0] .rodata : 0xffffff8009910000 - 0xffffff8009b80000 ( 2496 KB) [ 0.000000@0] .init : 0xffffff8009b80000 - 0xffffff8009f10000 ( 3648 KB) [ 0.000000@0] .data : 0xffffff8009f10000 - 0xffffff800a03aa00 ( 1195 KB) [ 0.000000@0] .bss : 0xffffff800a03aa00 - 0xffffff800a139034 ( 1018 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00400000 ( 4 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc010000000 ( 256 MB) [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok! [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016901@0] Console: colour dummy device 80x25 [ 0.021108@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031586@0] pid_max: default: 32768 minimum: 301 [ 0.036434@0] thread_stack_cache_init, vmap:ffffffc00e5af600, bitmap:ffffffc00e5a3000, cache page:e5e0 [ 0.045772@0] thread_stack_cache_init, allocation vm area:ffffffc00e5d94c0, addr:ffffff8020000000, size:20001000 [ 0.056005@0] cpu 0, vmap_stack:[ffffffc00ef5c960-ffffffc00ef60950] [ 0.062304@0] cpu 0, irq_stack: [ffffffc00ef53060-ffffffc00ef57050] [ 0.068604@0] cpu 1, vmap_stack:[ffffffc00ef75960-ffffffc00ef79950] [ 0.074903@0] cpu 1, irq_stack: [ffffffc00ef6c060-ffffffc00ef70050] [ 0.081203@0] cpu 2, vmap_stack:[ffffffc00ef8e960-ffffffc00ef92950] [ 0.087503@0] cpu 2, irq_stack: [ffffffc00ef85060-ffffffc00ef89050] [ 0.093803@0] cpu 3, vmap_stack:[ffffffc00efa7960-ffffffc00efab950] [ 0.100103@0] cpu 3, irq_stack: [ffffffc00ef9e060-ffffffc00efa2050] [ 0.106466@0] Security Framework initialized [ 0.110696@0] SELinux: Initializing. [ 0.114388@0] SELinux: Starting in permissive mode [ 0.114425@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.121107@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.128838@0] ftrace: allocating 30061 entries in 118 pages [ 0.186655@0] sched-energy: CPU device node has no sched-energy-costs [ 0.187470@0] CPU0: update cpu_capacity 1024 [ 0.191798@0] ASID allocator initialised with 32768 entries [ 0.229939@0] secmon: can't fine clear_range [ 0.230145@0] EFI services will not be available. [ 0.233410@0] Meson chip version = RevC (25:C - 23:0) [ 0.267080@1] Detected VIPT I-cache on CPU1 [ 0.267139@1] CPU1: update cpu_capacity 1024 [ 0.267142@1] CPU1: Booted secondary processor [410fd034] [ 0.295143@2] Detected VIPT I-cache on CPU2 [ 0.295197@2] CPU2: update cpu_capacity 1024 [ 0.295200@2] CPU2: Booted secondary processor [410fd034] [ 0.323216@3] Detected VIPT I-cache on CPU3 [ 0.323265@3] CPU3: update cpu_capacity 1024 [ 0.323267@3] CPU3: Booted secondary processor [410fd034] [ 0.323356@0] Brought up 4 CPUs [ 0.362573@0] SMP: Total of 4 processors activated. [ 0.367483@0] CPU features: detected feature: 32-bit EL0 Support [ 0.373519@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.384072@0] CPU: All CPU(s) started at EL2 [ 0.385258@0] alternatives: patching kernel code [ 0.390564@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.397782@0] devtmpfs: initialized [ 0.412756@0] DMI not present or invalid. [ 0.413118@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.421138@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.427696@0] pinctrl core: initialized pinctrl subsystem [ 0.434082@0] NET: Registered protocol family 16 [ 0.461671@0] cpuidle: using governor menu [ 0.462161@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000) [ 0.467781@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.475187@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.481350@0] clkmsr: clkmsr: driver init [ 0.485376@0] aml_watch_point_probe, in, wp:2 [ 0.489956@0] pstore: using zlib compression [ 0.494226@0] console [pstore-1] enabled [ 0.497657@0] pstore: Registered ramoops as persistent store backend [ 0.504057@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 [ 0.518426@0] aml_iomap: amlogic iomap probe done [ 0.525330@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.527284@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.616686@0] usbcore: registered new interface driver usbfs [ 0.616858@0] usbcore: registered new interface driver hub [ 0.622471@0] usbcore: registered new device driver usb [ 0.627760@0] pps_core: LinuxPPS API ver. 1 registered [ 0.632689@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.642086@0] PTP clock support registered [ 0.646425@0] dmi: Firmware registration failed. [ 0.651378@0] secmon: reserve_mem_size:0x300000 [ 0.655455@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.662283@0] secmon: get page:ffffffbf00140000, 5000 [ 0.667056@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.675443@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.683313@0] NetLabel: Initializing [ 0.685494@0] NetLabel: domain hash size = 128 [ 0.690080@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.695312@0] NetLabel: unlabeled traffic allowed by default [ 0.701929@0] clocksource: Switched to clocksource arch_sys_counter [ 0.828706@0] VFS: Disk quotas dquot_6.6.0 [ 0.828852@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.854807@0] NET: Registered protocol family 2 [ 0.855844@0] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.861056@0] TCP bind hash table entries: 2048 (order: 3, 32768 bytes) [ 0.867719@0] TCP: Hash tables configured (established 2048 bind 2048) [ 0.874282@0] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.880262@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.887008@0] NET: Registered protocol family 1 [ 0.891960@0] RPC: Registered named UNIX socket transport module. [ 0.897392@0] RPC: Registered udp transport module. [ 0.902284@0] RPC: Registered tcp transport module. [ 0.907175@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.916305@0] Unpacking initramfs... [ 1.414862@0] Initramfs unpacking failed: junk in compressed archive [ 1.421600@0] Freeing initrd memory: 6556K [ 1.422525@0] hw perfevents: clusterb_enabled = 0 [ 1.424781@0] hw perfevents: cpumasks 0xf, 0x0 [ 1.429308@0] hw perfevents: cluster A irq = 7 [ 1.433883@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.443980@0] audit: initializing netlink subsys (disabled) [ 1.447432@0] audit: type=2000 audit(1.256:1): initialized [ 1.454705@0] workingset: timestamp_bits=62 max_order=16 bucket_order=0 [ 1.478914@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.481757@1] NFS: Registering the id_resolver key type [ 1.484744@1] Key type id_resolver registered [ 1.488955@1] Key type id_legacy registered [ 1.493673@1] fuse init (API version 7.26) [ 1.499019@1] SELinux: Registering netfilter hooks [ 1.505288@1] NET: Registered protocol family 38 [ 1.505350@1] Key type asymmetric registered [ 1.508605@1] Asymmetric key parser 'x509' registered [ 1.514091@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.521336@1] io scheduler noop registered (default) [ 1.526263@1] io scheduler deadline registered [ 1.531098@1] io scheduler cfq registered [ 1.551382@0] random: fast init done [ 1.551479@0] random: crng init done [ 1.552922@1] Unable to detect cache hierarchy for CPU 0 [ 1.594273@1] loop: module loaded [ 1.595776@1] zram: Added device: zram0 [ 1.596213@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.602921@1] libphy: Fixed MDIO Bus: probed [ 1.607592@1] tun: Universal TUN/TAP device driver, 1.6 [ 1.612022@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.620225@1] ee eth reset:Addr = ffffff80081fd008 [ 1.623692@1] meson6-dwmac ff3f0000.ethernet: no reset control found [ 1.629705@1] stmmac - user ID: 0x11, Synopsys ID: 0x37 [ 1.634925@1] Ring mode enabled [ 1.638168@1] DMA HW capability register supported [ 1.642887@1] Normal descriptors [ 1.646217@1] RX Checksum Offload Engine supported [ 1.651110@1] COE Type 2 [ 1.653718@1] TX Checksum insertion supported [ 1.658204@1] Wake-Up On Lan supported [ 1.662147@1] Enable RX Mitigation via HW Watchdog Timer [ 1.675680@1] libphy: stmmac: probed [ 1.675732@1] eth%d: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active [ 1.682240@1] PPP generic driver version 2.4.2 [ 1.685123@1] PPP BSD Compression module registered [ 1.689671@1] PPP Deflate Compression module registered [ 1.694913@1] PPP MPPE Compression module registered [ 1.699885@1] NET: Registered protocol family 24 [ 1.705350@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.711284@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.718335@1] usbcore: registered new interface driver cdc_acm [ 1.723525@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.731962@1] usbcore: registered new interface driver usbserial [ 1.738656@2] mousedev: PS/2 mouse device common for all mice [ 1.744174@2] usbcore: registered new interface driver xpad [ 1.749494@1] i2c /dev entries driver [ 1.754364@1] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.758478@1] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.769384@1] ff803000.serial: clock gate not found [ 1.771052@1] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000 [ 1.778211@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart [ 1.793137@1] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200 [ 1.795842@1] console [ttyS0] enabled [ 1.803063@1] bootconsole [aml_uart0] disabled [ 1.812693@0] ff804000.serial: clock gate not found [ 1.816834@0] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000 [ 1.823961@0] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart [ 1.834373@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000 [ 1.840457@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart [ 1.850693@1] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000 [ 1.856902@1] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart [ 1.867967@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000 [ 1.877190@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.883670@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080 [ 1.898660@3] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40 [ 1.902492@3] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40 [ 1.914809@3] aml_dma ff63e000.aml_dma: Aml dma [ 1.917900@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.923002@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.929387@3] efusekeynum: 4 [ 1.931725@3] efusekeyname: mac offset: 0 size: 6 [ 1.938120@3] efusekeyname: mac_bt offset: 6 size: 6 [ 1.944531@3] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.950946@3] efusekeyname: usid offset: 18 size: 16 [ 1.957766@1] efuse efuse: probe OK! [ 1.963270@1] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller [ 1.970490@0] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode [ 1.975525@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80 [ 1.980765@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c [ 2.026069@0] meson-mmc: meson_mmc_probe() : success! [ 2.026346@0] amlogic mtd driver init [ 2.030379@0] prase_get_dtb_nand_parameter:128,parse dts start [ 2.035143@0] bl mode descrete [ 2.038021@0] fip_copies 4 [ 2.040685@0] fip_size 0x200000 [ 2.043824@0] nand_clk_ctrl 0xffe07000 [ 2.047548@0] prase_get_dtb_nand_parameter:234,parse dts end [ 2.053216@0] nand_clk_ctrl 0xffe07000 [ 2.056937@0] nand register base ffffff80083df800, nand clock register ffffff80083e1000 [ 2.065675@0] plat->aml_nand_device ffffff800a005c10 [ 2.069844@0] m3_nand_probe() aml_nand_device ffffff800a005c10 [ 2.075962@0] NAND device id: c2 da 90 95 6 0 [ 2.079974@0] NAND device: Manufacturer ID: [ 2.084037@0] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 2Gib MX30LF2G18AC ) [ 2.090821@0] oob_fill_cnt =32 oob_size =64, bch_bytes =14 [ 2.096254@0] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16 [ 2.101802@0] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1 [ 2.108048@0] mtd->oobavail: 0x8 [ 2.111445@0] aml_nand_init 2119: plat-name:bootloader [ 2.116367@0] Creating 1 MTD partitions on "bootloader": [ 2.121655@0] 0x000000000000-0x000000200000 : "bootloader" [ 2.130784@3] bootloader initialized ok [ 2.130914@3] plat->aml_nand_device ffffff800a005c10 [ 2.135901@3] m3_nand_probe() aml_nand_device ffffff800a005c10 [ 2.142032@3] NAND device id: c2 da 90 95 6 0 [ 2.146009@3] NAND device: Manufacturer ID: [ 2.150086@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 2Gib MX30LF2G18AC ) [ 2.156860@3] oob_fill_cnt =32 oob_size =64, bch_bytes =14 [ 2.162302@3] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16 [ 2.167842@3] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1 [ 2.174095@3] mtd->oobavail: 0x8 [ 2.177557@3] aml_nand_init 2119: plat-name:nandnormal [ 2.182439@3] bbt_start=20 [ 2.185068@3] env_start=24 [ 2.187786@3] key_start=32 [ 2.190463@3] dtb_start=40 [ 2.193128@3] ddr_start=44 [ 2.195834@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.202371@3] get_free_node 43: bitmap=0 [ 2.205783@3] get_free_node 55: bitmap=1 [ 2.209925@3] get_free_node 43: bitmap=1 [ 2.213583@3] get_free_node 55: bitmap=3 [ 2.217707@3] get_free_node 43: bitmap=3 [ 2.221401@3] get_free_node 55: bitmap=7 [ 2.225301@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.231972@3] nbbt free list: [ 2.234920@3] blockN=21, ec=-1, dirty_flag=0 [ 2.239166@3] blockN=22, ec=-1, dirty_flag=0 [ 2.243413@3] blockN=23, ec=-1, dirty_flag=0 [ 2.247660@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.253096@3] nbbt valid addr: 280000 [ 2.256329@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.261962@3] aml_nand_read_rsv_info:423,read nbbt info at 280000 [ 2.268235@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.274676@3] get_free_node 43: bitmap=7 [ 2.278168@3] get_free_node 55: bitmap=f [ 2.282272@3] get_free_node 43: bitmap=f [ 2.285967@3] get_free_node 55: bitmap=1f [ 2.290159@3] get_free_node 43: bitmap=1f [ 2.293941@3] get_free_node 55: bitmap=3f [ 2.298133@3] get_free_node 43: bitmap=3f [ 2.301896@3] get_free_node 55: bitmap=7f [ 2.306123@3] get_free_node 43: bitmap=7f [ 2.309869@3] get_free_node 55: bitmap=ff [ 2.314096@3] get_free_node 43: bitmap=ff [ 2.317843@3] get_free_node 55: bitmap=1ff [ 2.322140@3] get_free_node 43: bitmap=1ff [ 2.326008@3] get_free_node 55: bitmap=3ff [ 2.330081@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1 [ 2.336751@3] nenv free list: [ 2.339699@3] blockN=25, ec=-1, dirty_flag=0 [ 2.343945@3] blockN=26, ec=-1, dirty_flag=0 [ 2.348192@3] blockN=27, ec=-1, dirty_flag=0 [ 2.352439@3] blockN=28, ec=-1, dirty_flag=0 [ 2.356685@3] blockN=29, ec=-1, dirty_flag=0 [ 2.360932@3] blockN=30, ec=-1, dirty_flag=0 [ 2.365179@3] blockN=31, ec=-1, dirty_flag=0 [ 2.369426@3] aml_nand_scan_rsv_info 1141: page_num=32 [ 2.387506@3] nenv valid addr: 310000 [ 2.387539@3] nkey: info size=0x8000 max_scan_blk=40, start_blk=32 [ 2.391923@3] get_free_node 43: bitmap=3ff [ 2.395784@3] get_free_node 55: bitmap=7ff [ 2.400062@3] get_free_node 43: bitmap=7ff [ 2.403930@3] get_free_node 55: bitmap=fff [ 2.408207@3] get_free_node 43: bitmap=fff [ 2.412076@3] get_free_node 55: bitmap=1fff [ 2.416442@3] get_free_node 43: bitmap=1fff [ 2.420396@3] get_free_node 55: bitmap=3fff [ 2.424761@3] get_free_node 43: bitmap=3fff [ 2.428717@3] get_free_node 55: bitmap=7fff [ 2.433081@3] get_free_node 43: bitmap=7fff [ 2.437036@3] get_free_node 55: bitmap=ffff [ 2.441401@3] get_free_node 43: bitmap=ffff [ 2.445357@3] get_free_node 55: bitmap=1ffff [ 2.449807@3] get_free_node 43: bitmap=1ffff [ 2.453850@3] get_free_node 55: bitmap=3ffff [ 2.458096@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.464767@3] nkey free list: [ 2.467714@3] blockN=32, ec=-1, dirty_flag=0 [ 2.471961@3] blockN=33, ec=-1, dirty_flag=0 [ 2.476208@3] blockN=34, ec=-1, dirty_flag=0 [ 2.480454@3] blockN=35, ec=-1, dirty_flag=0 [ 2.484701@3] blockN=36, ec=-1, dirty_flag=0 [ 2.488948@3] blockN=37, ec=-1, dirty_flag=0 [ 2.493194@3] blockN=38, ec=-1, dirty_flag=0 [ 2.497441@3] blockN=39, ec=-1, dirty_flag=0 [ 2.501688@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.506801@3] nkey valid addr: fffffffffffe0000 [ 2.511308@3] aml_nand_key_check 1251 NO key exist [ 2.516076@3] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40 [ 2.522727@3] get_free_node 43: bitmap=3ffff [ 2.526563@3] get_free_node 55: bitmap=7ffff [ 2.531014@3] get_free_node 43: bitmap=7ffff [ 2.535056@3] get_free_node 55: bitmap=fffff [ 2.539507@3] get_free_node 43: bitmap=fffff [ 2.543550@3] get_free_node 55: bitmap=1fffff [ 2.547883@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1 [ 2.554554@3] ndtb free list: [ 2.557485@3] blockN=41, ec=-1, dirty_flag=0 [ 2.561747@3] blockN=42, ec=-1, dirty_flag=0 [ 2.565994@3] blockN=43, ec=-1, dirty_flag=0 [ 2.570241@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.588317@3] ndtb valid addr: 500000 [ 2.588351@3] nddr: info size=0x20000 max_scan_blk=46, start_blk=44 [ 2.592809@3] get_free_node 43: bitmap=1fffff [ 2.596936@3] get_free_node 55: bitmap=3fffff [ 2.601475@3] get_free_node 43: bitmap=3fffff [ 2.605603@3] get_free_node 55: bitmap=7fffff [ 2.609936@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.616607@3] nddr free list: [ 2.619554@3] blockN=44, ec=-1, dirty_flag=0 [ 2.623801@3] blockN=45, ec=-1, dirty_flag=0 [ 2.628048@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.633161@3] nddr valid addr: fffffffffffe0000 [ 2.637668@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.642438@3] tpl: off 8388608, size 8388608 [ 2.774341@3] Creating 6 MTD partitions on "nandnormal": [ 2.774388@3] 0x000000800000-0x000001000000 : "tpl" [ 2.786230@1] 0x000001000000-0x000001200000 : "misc" [ 2.789446@0] 0x000001200000-0x000002200000 : "recovery" [ 2.801657@3] 0x000002200000-0x000004200000 : "boot" [ 2.820823@0] 0x000004200000-0x000004700000 : "config" [ 2.825505@0] 0x000004700000-0x000010000000 : "nvdata" [ 2.926043@2] nandnormal initialized ok [ 2.926285@2] aml_ubootenv_init: register env chardev [ 2.929670@2] aml_ubootenv_init: register env chardev OK [ 2.934724@2] amlnf_dtb_init: register dtb cdev [ 2.939463@2] amlnf_dtb_init: register dtd cdev OK [ 2.943921@2] mtd_nand_probe 267 , err = 0 [ 2.949020@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.954451@2] input: aml_vkeypad as /devices/platform/rtc/input/input0 [ 2.961470@2] unifykey: storage in base: 0xffffffc005000000 [ 2.966082@2] unifykey: storage out base: 0xffffffc005040000 [ 2.971693@2] unifykey: storage block base: 0xffffffc005080000 [ 2.977487@2] unifykey: probe done! [ 2.981703@2] unifykey: no efuse-version set, use default value: -1 [ 2.987219@2] unifykey: key unify config unifykey-num is 6 [ 2.992742@2] unifykey: key unify fact unifykey-num is 6 [ 2.997949@2] unifykey: unifykey_devno: f200000 [ 3.002940@3] unifykey: device unifykeys created ok [ 3.007461@3] unifykey: aml_unifykeys_init done! [ 3.012342@3] sysled: module init [ 3.015824@3] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.020585@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.027978@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.036807@1] dmc_monitor_probe [ 3.038472@1] defendkey defendkey: Reserved memory is not enough! [ 3.043319@1] defendkey: probe of defendkey failed with error -22 [ 3.049643@1] GACT probability NOT on [ 3.053023@1] Mirror/redirect action on [ 3.056804@1] u32 classifier [ 3.059656@1] Actions configured [ 3.063210@1] Netfilter messages via NETLINK v0.30. [ 3.068492@1] nf_conntrack version 0.5.0 (2048 buckets, 8192 max) [ 3.074709@1] ctnetlink v0.93: registering with nfnetlink. [ 3.080531@1] xt_time: kernel timezone is -0000 [ 3.084270@1] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.090934@1] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.095608@1] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.101078@1] Initializing XFRM netlink socket [ 3.106645@1] NET: Registered protocol family 10 [ 3.112514@1] mip6: Mobile IPv6 [ 3.113154@1] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.119142@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.127188@1] NET: Registered protocol family 17 [ 3.129364@1] NET: Registered protocol family 15 [ 3.134029@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.147164@1] l2tp_core: L2TP core driver, V2.0 [ 3.151544@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.156458@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.162214@1] l2tp_netlink: L2TP netlink interface [ 3.167018@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.173107@1] l2tp_debugfs: L2TP debugfs support [ 3.177617@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.184262@1] NET: Registered protocol family 35 [ 3.189178@1] Key type dns_resolver registered [ 3.193747@1] Registered swp emulation handler [ 3.197646@1] Registered cp15_barrier emulation handler [ 3.202837@1] Registered setend emulation handler [ 3.207579@1] disable EAS feature [ 3.212214@0] registered taskstats version 1 [ 3.228726@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.735207@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.735292@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.743581@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 3.752027@2] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000 [ 3.759475@1] hub 1-0:1.0: USB hub found [ 3.761972@1] hub 1-0:1.0: 1 port detected [ 3.766576@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.771605@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 3.779494@1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.788962@2] hub 2-0:1.0: USB hub found [ 3.791598@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 3.798877@2] usb usb2: Unsupported the hub [ 3.803615@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:08 UTC (1420070408) [ 3.811713@2] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00d16b000) [ 3.811790@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 3.819693@2] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000 [ 3.819706@2] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00d098c00 [ 3.920304@3] dwc_otg: Core Release: 3.10a [ 3.920358@3] dwc_otg: Setting default values for core params [ 3.924556@3] dwc_otg: curmode: 0, host_only: 0 [ 3.929053@3] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT [ 3.941564@3] dwc_otg: Using Buffer DMA mode [ 3.941604@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 3.945505@3] dwc_otg: Working on port type = SLAVE [ 3.950363@3] dwc_otg: Dedicated Tx FIFOs mode [ 3.957895@3] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22 [ 3.964090@3] cpucore_cooling_register, max_cpu_core_num:4 [ 3.976820@3] gxbb_pm: enter meson_pm_probe! [ 3.976878@3] no vddio3v3_en pin [ 3.978578@3] pm-meson aml_pm: Can't get switch_clk81 [ 3.983622@3] gxbb_pm: meson_pm_probe done [ 3.988540@3] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200 [ 3.995028@3] Freeing unused kernel memory: 3648K [ 4.009790@3] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200 [ 4.270775@2] ubi0: attaching mtd5 [ 4.290410@2] ubi0: scanning is finished [ 4.295280@3] ubi0: attached mtd5 (name "config", size 5 MiB) [ 4.295412@3] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 4.302477@3] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 4.309377@3] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 4.316490@3] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0 [ 4.322557@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 4.329961@3] ubi0: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 3332489007 [ 4.339198@3] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4 [ 4.348398@2] ubi0: background thread "ubi_bgt0d" started, PID 1077 [ 4.361243@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1081 [ 4.379575@3] UBIFS (ubi0:0): recovery needed [ 4.429467@2] UBIFS (ubi0:0): recovery completed [ 4.429728@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data" [ 4.436477@2] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 4.446513@2] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) [ 4.456733@2] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB) [ 4.463325@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 7E454C52-F279-41EB-93B6-A17EC2EB0C91, small LPT model [ 4.488025@1] ubi2: attaching mtd6 [ 5.199461@1] ubi2: scanning is finished [ 5.206718@3] ubi2: attached mtd6 (name "nvdata", size 185 MiB) [ 5.207016@3] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 5.214079@3] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 5.220991@3] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 5.228087@3] ubi2: good PEBs: 1480, bad PEBs: 0, corrupted PEBs: 0 [ 5.234334@3] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.241698@3] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 421780983 [ 5.250887@3] ubi2: available PEBs: 0, total reserved PEBs: 1480, PEBs reserved for bad PEB handling: 4 [ 5.260334@1] ubi2: background thread "ubi_bgt2d" started, PID 1089 [ 5.273174@3] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1093 [ 5.291488@2] UBIFS (ubi2:0): recovery needed [ 5.354929@2] UBIFS (ubi2:0): recovery completed [ 5.355188@2] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdata_data" [ 5.361951@2] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 5.371974@2] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs) [ 5.382804@2] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.389566@2] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 465A38A3-2FFE-433D-98B3-8176AE5D3CA7, small LPT model [ 5.631694@3] eth0: device MAC address 02:f2:d9:20:05:70 [ 5.714611@1] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP. [ 5.715904@1] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.943372@1] uart_trans: loading out-of-tree module taints kernel. [ 5.945628@1] register uart_trans chrdev success. [ 5.949162@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600 [ 5.956732@1] tty port open success [/dev/ttyS3]! [ 5.961396@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200 [ 5.970013@1] init sucess for tty struct (246:3) [/dev/ttyS3] [ 5.975914@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600 [ 5.983583@1] tty port open success [/dev/ttyS2]! [ 5.988261@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200 [ 5.996654@1] init sucess for tty struct (246:2) [/dev/ttyS2] [ 6.002781@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600 [ 6.010523@1] tty port open success [/dev/ttyS1]! [ 6.015124@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200 [ 6.023522@1] init sucess for tty struct (246:1) [/dev/ttyS1] [ 6.029747@1] create workqueue success! [ 7.770288@1] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 7.773576@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.210849@1] uart trans dev open. [ 19.210968@1] uart_buf virt addr = 0xffffffc00b100000 [ 19.213666@1] uart_buf phys addr = 0x0b100000 [ 19.218052@1] uart_buf pfn = 0x0000b100 [ 19.222665@1] uart trans stop send work timer. [ 19.226984@1] uart trans set chain exist bits:0x7. [ 19.231546@1] uart trans set work queue count 768. [ 36.857575@0] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ 74.199776@2] uart set baud to: 4098 [ 74.199838@2] uart set baud to: 4098 [ 74.201334@2] uart set baud to: 4098 [ 87.317150@1] uart trans stop send work timer. [ 106.264889@2] uart trans start send work timer. ===========================================Miner log=========================================== 2015-01-01 00:00:15 Open miner sn file /config/sn error 2015-01-01 00:00:15 Miner compile time: Thu Jun 9 13:06:22 CST 2022 type: Antminer BHB42XXX sn : 2015-01-01 00:00:16 This is fix-freq version 2015-01-01 00:00:16 Miner compile time: Thu Jun 9 13:06:22 CST 2022 type: Antminer BHB42XXX 2015-01-01 00:00:16 commit version: ffd674e 2022-06-09 10:18:00, build by: jenkins 2022-06-09 13:16:42 2015-01-01 00:00:16 opt_multi_version = 1 2015-01-01 00:00:16 opt_bitmain_ab = 1 2015-01-01 00:00:16 mid_auto_gen = 1 2015-01-01 00:00:16 opt_bitmain_work_mode = 0 2015-01-01 00:00:16 port 439 already exported 2015-01-01 00:00:16 port 454 already exported 2015-01-01 00:00:16 port 440 already exported 2015-01-01 00:00:16 port 455 already exported 2015-01-01 00:00:16 port 441 already exported 2015-01-01 00:00:16 port 456 already exported 2015-01-01 00:00:16 port 438 already exported 2015-01-01 00:00:16 port 453 already exported 2015-01-01 00:00:16 port 446 already exported 2015-01-01 00:00:16 port 445 already exported 2015-01-01 00:00:16 Note: front fan is power on! 2015-01-01 00:00:16 Note: rear fan is power on! 2015-01-01 00:00:16 start the http log. 2015-01-01 00:00:16 httpListenThread start ret=0 2015-01-01 00:00:16 start listen on 6060 ... 2015-01-01 00:00:16 bad chain id = 3 2015-01-01 00:00:19 bad chain id = 3 2022-09-11 15:25:29 ==========================capability start========================== 2022-09-11 15:25:29 board num = 3 2022-09-11 15:25:29 board id = 0, chain num = 1 2022-09-11 15:25:29 chain id = 0 2022-09-11 15:25:29 board id = 1, chain num = 1 2022-09-11 15:25:29 chain id = 1 2022-09-11 15:25:29 board id = 2, chain num = 1 2022-09-11 15:25:29 chain id = 2 2022-09-11 15:25:29 ==========================capability end============================ 2022-09-11 15:25:29 chain num = 3 2022-09-11 15:25:29 skip loading levels for now 2022-09-11 15:25:30 load chain 0 eeprom data 2022-09-11 15:25:30 load chain 1 eeprom data 2022-09-11 15:25:31 load chain 2 eeprom data 2022-09-11 15:25:31 miner type: Antminer S19 2022-09-11 15:25:31 multi machine mode 2022-09-11 15:25:31 load machine BHB42831 conf 2022-09-11 15:25:31 machine : BHB42831 2022-09-11 15:25:31 chain_num 4, chain_domain_num 44, chain_asic_num 88, domain_asic_num 2 2022-09-11 15:25:31 fan_eft : 0 fan_pwm : 100 2022-09-11 15:25:31 create thread get_nonce_and_register_thread 2022-09-11 15:25:31 fixed working voltage = 1580 2022-09-11 15:25:31 min freq in eeprom = 675 2022-09-11 15:25:31 fixed frequency is 675 2022-09-11 15:25:31 Chain [0] PCB Version: 0x0100 2022-09-11 15:25:31 Chain [0] BOM Version: 0x0010 2022-09-11 15:25:31 Chain [1] PCB Version: 0x0100 2022-09-11 15:25:31 Chain [1] BOM Version: 0x0010 2022-09-11 15:25:31 Chain [2] PCB Version: 0x0100 2022-09-11 15:25:31 Chain [2] BOM Version: 0x0010 2022-09-11 15:25:31 bad chain id = 3 2022-09-11 15:25:31 Fan check passed. 2022-09-11 15:25:31 uart_trans addr:0xf6edc000. 2022-09-11 15:25:31 max sensor num = 4 2022-09-11 15:25:31 STATUS_INITED: soc init done! 2022-09-11 15:25:31 temperature_monitor_thread start... 2022-09-11 15:25:34 start to init... 2022-09-11 15:25:34 i2c_sim_init start 2022-09-11 15:25:34 init gpio477 2022-09-11 15:25:34 init gpio476 2022-09-11 15:25:34 i2c_sim_init end 2022-09-11 15:25:35 power open power_version = 0x78 2022-09-11 15:25:38 power is not Calibrated 2022-09-11 15:25:39 power type version: 0x0078 2022-09-11 15:25:41 disable power watchdog: 0x0000 2022-09-11 15:25:42 Enter sleep to make sure power release finish. 2022-09-11 15:26:13 Slept 30 seconds, diff = 1. 2022-09-11 15:26:16 set_voltage_by_steps to 1700. 2022-09-11 15:26:26 start up min temp by 75a = 27 2022-09-11 15:26:29 Chain[0]: find 88 asic, times 0 2022-09-11 15:26:31 Chain[1]: find 0 asic, times 0 2022-09-11 15:26:32 Chain[1]: find 0 asic, times 1 2022-09-11 15:26:34 Chain[1]: find 0 asic, times 2 2022-09-11 15:26:34 Chain 1 only find 0 asic, will power off hash board 1 2022-09-11 15:26:36 Chain[2]: find 88 asic, times 0 2022-09-11 15:26:36 ERROR_SOC_INIT: soc init failed! 2022-09-11 15:26:36 stop_mining: soc init failed! 2022-09-11 15:26:36 uninit_temp_info 2022-09-11 15:26:36 do not read temp anymore... 2022-09-11 15:26:36 cancel thread 2022-09-11 15:26:36 ****power off hashboard**** 2022-09-11 15:26:36 temp monitor thread exit 2022-09-11 15:26:58 Version num 65536 2022-09-11 15:26:58 Mask num 0x1fffe000 2022-09-11 15:26:58 opt_multi_version = 65536, interval timeout = 2290648 2022-09-11 15:26:58 freq = 675, percent = 90, hcn = 3883, timeout = 2290648
-
Dear customer.
From the kernel log, it can't detect the whole chip. please kindly exclude the issue by following steps:
1. Check the wires for the hashboard--pull them and re-plug them again, and also you can try to change the new wires
2. Upgrade to the latest firmware
Firmware download information for S19
https://file12.bitmain.com/shop-product-s3/firmware/5d8b5a8e-742a-4def-b07a-d14204022309/2021/12/23/11/Antminer-S19-merge-release-20211216091201-8IN1.bmuHow to reload or upgrade firmware
https://support.bitmain.com/hc/en-us/articles/4475613228569-19-Series-Miner-Online-Upgrade-Tutorial3. Reset the miner to the factory settings
https://support.bitmain.com/hc/en-us/articles/115003595387-How-to-reset-miner-to-factory-settings-
4. Please clean up the dust.
How To Clean and Dust The Antminers
https://support.bitmain.com/hc/en-us/articles/115004520173-How-To-Clean-and-Dust-The-Antminers
5. Flashing SD card
Flashing SD card instruction for S19:
https://support.bitmain.com/hc/en-us/articles/900003100743-S19-S19-Pro-control-board-program-recovery-SD-card-flashing-Flashing SD card documents:
https://file12.bitmain.com/shop-product/firmware/0810d334-e075-4b61-be08-b58619d37513/2020/09/27/10/sd-recover-bmu-S19-fixed-202006012026-release.zipIf there are still the same problems after the above steps, please send it to repair.
Best regards
-
Dear Customer,
If you have any questions please feel free to contact us.
We recommend that you go to https://support.bitmain.com/hc/en-us click Submit a request at the bottom of the website, and select the correct ticket type.
We will reply to your question as soon as possible. -
Hi, ive tried every method listed except firmware update, for some reason.. trying to update firmware, everytime i press update via website.. it just flashes update for 1 second and nothing happens after that. Im trying to flash sd firmware, but none of the firmware boots during start up. I have a feeling my s19 is too new and my control board is an A113D control board with microUSB port. I could not find a suitable A113D ctrl board firmware to download. All current s19 firmwares dont boot. How should i proceed? thnx alot.
-
ok,.. ive managed to sd flash my firmware with the a113d version... now ive got a whole new kernal error. Not sure what to do next.
[ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Wed Oct 20 18:57:17 CST 2021 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '') [ 0.000000@0] bootconsole [aml_uart0] enabled [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon [ 0.000000@0] __reserved_mem_alloc_size, start:0x000000003e000000, end:0x0000000040000000, len:32 MiB [ 0.000000@0] failed to allocate memory for node linux,meson-fb, size:32 MB [ 0.000000@0] cma: Reserved 8 MiB at 0x000000000f800000 [ 0.000000@0] On node 0 totalpages: 65536 [ 0.000000@0] DMA zone: 1024 pages used for memmap [ 0.000000@0] DMA zone: 0 pages reserved [ 0.000000@0] DMA zone: 65536 pages, LIFO batch:15 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00f753000 s64536 r8192 d29672 u102400 [ 0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096 [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64512 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs init=/sbin/init [ 0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000000@0] Memory: 219920K/262144K available (8764K kernel code, 1194K rwdata, 2428K rodata, 3648K init, 1018K bss, 29936K reserved, 12288K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009910000 ( 8768 KB) [ 0.000000@0] .rodata : 0xffffff8009910000 - 0xffffff8009b80000 ( 2496 KB) [ 0.000000@0] .init : 0xffffff8009b80000 - 0xffffff8009f10000 ( 3648 KB) [ 0.000000@0] .data : 0xffffff8009f10000 - 0xffffff800a03aa00 ( 1195 KB) [ 0.000000@0] .bss : 0xffffff800a03aa00 - 0xffffff800a139534 ( 1019 KB) [ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00400000 ( 4 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc010000000 ( 256 MB) [ 0.000000@0] can't find symbol:arm_dma_alloc [ 0.000000@0] can't find symbol:__alloc_from_contiguous [ 0.000000@0] can't find symbol:cma_allocator_alloc [ 0.000000@0] 0, addr:ffffff800971cff0 + 140, aml_cma_alloc_post_hook [ 0.000000@0] 1, addr:ffffff800951f258 + 78, dma_alloc_from_contiguous [ 0.000000@0] 2, addr:ffffff80091fdd50 + 388, cma_alloc [ 0.000000@0] 3, addr:ffffff80091f76c8 + 2d0, __kmalloc_track_caller [ 0.000000@0] 4, addr:ffffff80091f4a70 + 2d0, __kmalloc [ 0.000000@0] 5, addr:ffffff80091f4750 + 258, kmem_cache_alloc_trace [ 0.000000@0] 6, addr:ffffff80091f4500 + 250, kmem_cache_alloc [ 0.000000@0] 7, addr:ffffff80091f4490 + 70, __slab_alloc.isra.24.constprop.28 [ 0.000000@0] 8, addr:ffffff80091f4108 + 388, ___slab_alloc.constprop.29 [ 0.000000@0] 9, addr:ffffff80091f1e70 + 420, new_slab [ 0.000000@0] 10, addr:ffffff80091e52f8 + b0, vzalloc [ 0.000000@0] 11, addr:ffffff80091e5248 + b0, vmalloc [ 0.000000@0] 12, addr:ffffff80091e4b00 + 2e0, __vmalloc_node_range [ 0.000000@0] 13, addr:ffffff80091ca410 + 110, kmalloc_order_trace [ 0.000000@0] 14, addr:ffffff80091ca2a0 + 170, kmalloc_order [ 0.000000@0] 15, addr:ffffff80091ab5a8 + 168, __alloc_page_frag [ 0.000000@0] 16, addr:ffffff80091ab540 + 68, alloc_pages_exact [ 0.000000@0] 17, addr:ffffff80091ab510 + 30, get_zeroed_page [ 0.000000@0] 18, addr:ffffff80091ab4b8 + 58, __get_free_pages [ 0.000000@0] 19, addr:ffffff80091aa800 + cb8, __alloc_pages_nodemask [ 0.000000@0] 20, addr:ffffff800909c6e8 + 2a8, __dma_alloc [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] [ 0.000000@0] ********************************************************** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ** ** [ 0.000000@0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000@0] ** ** [ 0.000000@0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000@0] ** unsafe for production use. ** [ 0.000000@0] ** ** [ 0.000000@0] ** If you see this message and you are not debugging ** [ 0.000000@0] ** the kernel, report this immediately to your vendor! ** [ 0.000000@0] ** ** [ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000@0] ********************************************************** [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] axg_aoclkc_init: register ao clk ok! [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk [ 0.000000@0] axg_amlogic_init_media: register meson media clk [ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks [ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk [ 0.000000@0] axg_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008251@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194 [ 0.016911@0] Console: colour dummy device 80x25 [ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.031585@0] pid_max: default: 32768 minimum: 301 [ 0.036439@0] thread_stack_cache_init, vmap:ffffffc00edaf600, bitmap:ffffffc00eda3000, cache page:ede0 [ 0.045772@0] thread_stack_cache_init, allocation vm area:ffffffc00edd94c0, addr:ffffff8020000000, size:20001000 [ 0.056005@0] cpu 0, vmap_stack:[ffffffc00f75c960-ffffffc00f760950] [ 0.062304@0] cpu 0, irq_stack: [ffffffc00f753060-ffffffc00f757050] [ 0.068603@0] cpu 1, vmap_stack:[ffffffc00f775960-ffffffc00f779950] [ 0.074903@0] cpu 1, irq_stack: [ffffffc00f76c060-ffffffc00f770050] [ 0.081203@0] cpu 2, vmap_stack:[ffffffc00f78e960-ffffffc00f792950] [ 0.087503@0] cpu 2, irq_stack: [ffffffc00f785060-ffffffc00f789050] [ 0.093803@0] cpu 3, vmap_stack:[ffffffc00f7a7960-ffffffc00f7ab950] [ 0.100103@0] cpu 3, irq_stack: [ffffffc00f79e060-ffffffc00f7a2050] [ 0.106464@0] Security Framework initialized [ 0.110695@0] SELinux: Initializing. [ 0.114389@0] SELinux: Starting in permissive mode [ 0.114428@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.121108@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.128866@0] ftrace: allocating 30089 entries in 118 pages [ 0.184565@0] sched-energy: CPU device node has no sched-energy-costs [ 0.185378@0] CPU0: update cpu_capacity 1024 [ 0.189705@0] ASID allocator initialised with 32768 entries [ 0.227687@0] secmon: can't fine clear_range [ 0.227897@0] EFI services will not be available. [ 0.231170@0] Meson chip version = RevC (25:C - 23:0) [ 0.265035@1] Detected VIPT I-cache on CPU1 [ 0.265094@1] CPU1: update cpu_capacity 1024 [ 0.265097@1] CPU1: Booted secondary processor [410fd034] [ 0.293103@2] Detected VIPT I-cache on CPU2 [ 0.293157@2] CPU2: update cpu_capacity 1024 [ 0.293159@2] CPU2: Booted secondary processor [410fd034] [ 0.321168@3] Detected VIPT I-cache on CPU3 [ 0.321218@3] CPU3: update cpu_capacity 1024 [ 0.321220@3] CPU3: Booted secondary processor [410fd034] [ 0.321312@0] Brought up 4 CPUs [ 0.360535@0] SMP: Total of 4 processors activated. [ 0.365443@0] CPU features: detected feature: 32-bit EL0 Support [ 0.371479@0] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.382044@0] CPU: All CPU(s) started at EL2 [ 0.383219@0] alternatives: patching kernel code [ 0.388544@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755 [ 0.395749@0] devtmpfs: initialized [ 0.411231@0] DMI not present or invalid. [ 0.411591@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.419613@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.426178@0] pinctrl core: initialized pinctrl subsystem [ 0.432598@0] NET: Registered protocol family 16 [ 0.452122@0] cpuidle: using governor menu [ 0.452630@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000) [ 0.458235@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers. [ 0.465647@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.471814@0] clkmsr: clkmsr: driver init [ 0.475850@0] aml_watch_point_probe, in, wp:2 [ 0.481297@0] pstore: using zlib compression [ 0.484773@0] console [pstore-1] enabled [ 0.488110@0] pstore: Registered ramoops as persistent store backend [ 0.494524@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0 [ 0.508888@0] aml_iomap: amlogic iomap probe done [ 0.515863@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c [ 0.517795@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.610121@0] usbcore: registered new interface driver usbfs [ 0.610294@0] usbcore: registered new interface driver hub [ 0.615918@0] usbcore: registered new device driver usb [ 0.621255@0] pps_core: LinuxPPS API ver. 1 registered [ 0.626144@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.635542@0] PTP clock support registered [ 0.639893@0] dmi: Firmware registration failed. [ 0.644831@0] secmon: reserve_mem_size:0x300000 [ 0.648894@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.655834@0] secmon: get page:ffffffbf00140000, 5000 [ 0.660492@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.668885@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.676806@0] NetLabel: Initializing [ 0.678932@0] NetLabel: domain hash size = 128 [ 0.683517@0] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.688766@0] NetLabel: unlabeled traffic allowed by default [ 0.695397@0] clocksource: Switched to clocksource arch_sys_counter [ 0.824874@0] VFS: Disk quotas dquot_6.6.0 [ 0.825018@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.851705@1] NET: Registered protocol family 2 [ 0.852796@1] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.857968@1] TCP bind hash table entries: 2048 (order: 3, 32768 bytes) [ 0.864659@1] TCP: Hash tables configured (established 2048 bind 2048) [ 0.871216@1] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.877166@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.883917@1] NET: Registered protocol family 1 [ 0.888893@1] RPC: Registered named UNIX socket transport module. [ 0.894307@1] RPC: Registered udp transport module. [ 0.899178@1] RPC: Registered tcp transport module. [ 0.904085@1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.913321@1] Unpacking initramfs... [ 1.413768@2] Initramfs unpacking failed: junk in compressed archive [ 1.420555@2] Freeing initrd memory: 6536K [ 1.421503@2] hw perfevents: clusterb_enabled = 0 [ 1.423791@2] hw perfevents: cpumasks 0xf, 0x0 [ 1.428260@2] hw perfevents: cluster A irq = 7 [ 1.432836@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.443050@2] audit: initializing netlink subsys (disabled) [ 1.446409@2] audit: type=2000 audit(1.260:1): initialized [ 1.453700@2] workingset: timestamp_bits=62 max_order=16 bucket_order=0 [ 1.478564@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.481687@2] NFS: Registering the id_resolver key type [ 1.484276@2] Key type id_resolver registered [ 1.488592@2] Key type id_legacy registered [ 1.493217@2] fuse init (API version 7.26) [ 1.498673@2] SELinux: Registering netfilter hooks [ 1.504927@2] NET: Registered protocol family 38 [ 1.504988@2] Key type asymmetric registered [ 1.508232@2] Asymmetric key parser 'x509' registered [ 1.513754@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.520930@2] io scheduler noop registered (default) [ 1.525905@2] io scheduler deadline registered [ 1.530806@2] io scheduler cfq registered [ 1.551843@0] random: fast init done [ 1.551942@0] random: crng init done [ 1.553377@2] Unable to detect cache hierarchy for CPU 0 [ 1.595296@2] loop: module loaded [ 1.600953@2] zram: Added device: zram0 [ 1.601355@2] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.606234@2] libphy: Fixed MDIO Bus: probed [ 1.610922@2] tun: Universal TUN/TAP device driver, 1.6 [ 1.615374@2] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.623613@2] ee eth reset:Addr = ffffff80081fd008 [ 1.631036@2] meson6-dwmac ff3f0000.ethernet: no reset control found [ 1.633049@2] stmmac - user ID: 0x11, Synopsys ID: 0x37 [ 1.638285@2] Ring mode enabled [ 1.641512@2] DMA HW capability register supported [ 1.646245@2] Normal descriptors [ 1.649561@2] RX Checksum Offload Engine supported [ 1.654469@2] COE Type 2 [ 1.657086@2] TX Checksum insertion supported [ 1.661556@2] Wake-Up On Lan supported [ 1.665493@2] Enable RX Mitigation via HW Watchdog Timer [ 1.679033@2] libphy: stmmac: probed [ 1.679085@2] eth%d: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active [ 1.685563@2] PPP generic driver version 2.4.2 [ 1.688530@2] PPP BSD Compression module registered [ 1.693022@2] PPP Deflate Compression module registered [ 1.698273@2] PPP MPPE Compression module registered [ 1.703237@2] NET: Registered protocol family 24 [ 1.708726@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.714634@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.721714@2] usbcore: registered new interface driver cdc_acm [ 1.726883@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.735326@2] usbcore: registered new interface driver usbserial [ 1.742012@2] mousedev: PS/2 mouse device common for all mice [ 1.747467@2] usbcore: registered new interface driver xpad [ 1.752860@2] i2c /dev entries driver [ 1.757585@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 1.761867@2] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 1.772943@2] ff803000.serial: clock gate not found [ 1.774345@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000 [ 1.781600@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart [ 1.796499@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200 [ 1.799185@2] console [ttyS0] enabled [ 1.806419@2] bootconsole [aml_uart0] disabled [ 1.816118@1] ff804000.serial: clock gate not found [ 1.820220@1] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000 [ 1.827320@1] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart [ 1.837728@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000 [ 1.843813@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart [ 1.854021@2] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000 [ 1.860290@2] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart [ 1.871295@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000 [ 1.880561@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port [ 1.887029@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080 [ 1.902138@2] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40 [ 1.905874@2] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40 [ 1.918253@2] aml_dma ff63e000.aml_dma: Aml dma [ 1.921468@2] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 1.926389@2] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.932714@2] efusekeynum: 4 [ 1.935043@2] efusekeyname: mac offset: 0 size: 6 [ 1.941521@2] efusekeyname: mac_bt offset: 6 size: 6 [ 1.947904@2] efusekeyname: mac_wifi offset: 12 size: 6 [ 1.954305@2] efusekeyname: usid offset: 18 size: 16 [ 1.961141@1] efuse efuse: probe OK! [ 1.966556@1] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller [ 1.973847@1] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode [ 1.978935@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80 [ 1.984118@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c [ 2.027544@1] meson-mmc: meson_mmc_probe() : success! [ 2.027807@1] amlogic mtd driver init [ 2.031884@1] prase_get_dtb_nand_parameter:128,parse dts start [ 2.036621@1] bl mode descrete [ 2.039503@1] fip_copies 4 [ 2.042159@1] fip_size 0x200000 [ 2.045300@1] nand_clk_ctrl 0xffe07000 [ 2.049030@1] prase_get_dtb_nand_parameter:234,parse dts end [ 2.054691@1] nand_clk_ctrl 0xffe07000 [ 2.058421@1] nand register base ffffff80083df800, nand clock register ffffff80083e1000 [ 2.067157@1] plat->aml_nand_device ffffff800a005a90 [ 2.071317@1] m3_nand_probe() aml_nand_device ffffff800a005a90 [ 2.077397@1] NAND device id: c2 da 90 95 6 0 [ 2.081447@1] NAND device: Manufacturer ID: [ 2.085512@1] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 2Gib MX30LF2G18AC ) [ 2.092294@1] oob_fill_cnt =32 oob_size =64, bch_bytes =14 [ 2.097729@1] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16 [ 2.103277@1] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1 [ 2.109522@1] mtd->oobavail: 0x8 [ 2.112926@1] aml_nand_init 2119: plat-name:bootloader [ 2.117843@1] Creating 1 MTD partitions on "bootloader": [ 2.123129@1] 0x000000000000-0x000000200000 : "bootloader" [ 2.132284@3] bootloader initialized ok [ 2.132388@3] plat->aml_nand_device ffffff800a005a90 [ 2.137372@3] m3_nand_probe() aml_nand_device ffffff800a005a90 [ 2.143526@3] NAND device id: c2 da 90 95 6 0 [ 2.147484@3] NAND device: Manufacturer ID: [ 2.151551@3] 0xc2, Chip ID: 0xc2 (Macronix Slc NAND 2Gib MX30LF2G18AC ) [ 2.158333@3] oob_fill_cnt =32 oob_size =64, bch_bytes =14 [ 2.163768@3] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16 [ 2.169326@3] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1 [ 2.175563@3] mtd->oobavail: 0x8 [ 2.179035@3] aml_nand_init 2119: plat-name:nandnormal [ 2.183942@3] bbt_start=20 [ 2.186543@3] env_start=24 [ 2.189251@3] key_start=32 [ 2.191935@3] dtb_start=40 [ 2.194603@3] ddr_start=44 [ 2.197310@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20 [ 2.203843@3] get_free_node 43: bitmap=0 [ 2.207258@3] get_free_node 55: bitmap=1 [ 2.211402@3] get_free_node 43: bitmap=1 [ 2.215058@3] get_free_node 55: bitmap=3 [ 2.219182@3] get_free_node 43: bitmap=3 [ 2.222876@3] get_free_node 55: bitmap=7 [ 2.226776@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 [ 2.233447@3] nbbt free list: [ 2.236394@3] blockN=21, ec=-1, dirty_flag=0 [ 2.240641@3] blockN=22, ec=-1, dirty_flag=0 [ 2.244887@3] blockN=23, ec=-1, dirty_flag=0 [ 2.249135@3] aml_nand_scan_rsv_info 1141: page_num=1 [ 2.254573@3] nbbt valid addr: 280000 [ 2.257805@3] aml_nand_bbt_check 1306 bbt is valid, reading. [ 2.263445@3] aml_nand_read_rsv_info:423,read nbbt info at 280000 [ 2.269712@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24 [ 2.275949@3] get_free_node 43: bitmap=7 [ 2.279642@3] get_free_node 55: bitmap=f [ 2.283951@3] get_free_node 43: bitmap=f [ 2.287443@3] get_free_node 55: bitmap=1f [ 2.291635@3] get_free_node 43: bitmap=1f [ 2.295416@3] get_free_node 55: bitmap=3f [ 2.299608@3] get_free_node 43: bitmap=3f [ 2.303371@3] get_free_node 55: bitmap=7f [ 2.307582@3] get_free_node 43: bitmap=7f [ 2.311344@3] get_free_node 55: bitmap=ff [ 2.315571@3] get_free_node 43: bitmap=ff [ 2.319318@3] get_free_node 55: bitmap=1ff [ 2.323615@3] get_free_node 43: bitmap=1ff [ 2.327482@3] get_free_node 55: bitmap=3ff [ 2.331555@3] nenv : phy_blk_addr=25, ec=0, phy_page_addr=0, timestamp=4 [ 2.338226@3] nenv free list: [ 2.341174@3] blockN=24, ec=-1, dirty_flag=0 [ 2.345421@3] blockN=26, ec=-1, dirty_flag=0 [ 2.349667@3] blockN=27, ec=-1, dirty_flag=0 [ 2.353914@3] blockN=28, ec=-1, dirty_flag=0 [ 2.358160@3] blockN=29, ec=-1, dirty_flag=0 [ 2.362407@3] blockN=30, ec=-1, dirty_flag=0 [ 2.366654@3] blockN=31, ec=-1, dirty_flag=0 [ 2.370900@3] aml_nand_scan_rsv_info 1141: page_num=32 [ 2.389066@3] nenv valid addr: 330000 [ 2.389100@3] nkey: info size=0x8000 max_scan_blk=40, start_blk=32 [ 2.393478@3] get_free_node 43: bitmap=3ff [ 2.397345@3] get_free_node 55: bitmap=7ff [ 2.401623@3] get_free_node 43: bitmap=7ff [ 2.405491@3] get_free_node 55: bitmap=fff [ 2.409770@3] get_free_node 43: bitmap=fff [ 2.413638@3] get_free_node 55: bitmap=1fff [ 2.418003@3] get_free_node 43: bitmap=1fff [ 2.421958@3] get_free_node 55: bitmap=3fff [ 2.426323@3] get_free_node 43: bitmap=3fff [ 2.430278@3] get_free_node 55: bitmap=7fff [ 2.434644@3] get_free_node 43: bitmap=7fff [ 2.438598@3] get_free_node 55: bitmap=ffff [ 2.442963@3] get_free_node 43: bitmap=ffff [ 2.446916@3] get_free_node 55: bitmap=1ffff [ 2.451370@3] get_free_node 43: bitmap=1ffff [ 2.455410@3] get_free_node 55: bitmap=3ffff [ 2.459657@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.466328@3] nkey free list: [ 2.469275@3] blockN=32, ec=-1, dirty_flag=0 [ 2.473522@3] blockN=33, ec=-1, dirty_flag=0 [ 2.477769@3] blockN=34, ec=-1, dirty_flag=0 [ 2.482016@3] blockN=35, ec=-1, dirty_flag=0 [ 2.486262@3] blockN=36, ec=-1, dirty_flag=0 [ 2.490509@3] blockN=37, ec=-1, dirty_flag=0 [ 2.494755@3] blockN=38, ec=-1, dirty_flag=0 [ 2.499002@3] blockN=39, ec=-1, dirty_flag=0 [ 2.503249@3] aml_nand_scan_rsv_info 1141: page_num=16 [ 2.508362@3] nkey valid addr: fffffffffffe0000 [ 2.512868@3] aml_nand_key_check 1251 NO key exist [ 2.517638@3] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40 [ 2.524090@3] get_free_node 43: bitmap=3ffff [ 2.528125@3] get_free_node 55: bitmap=7ffff [ 2.532781@3] get_free_node 43: bitmap=7ffff [ 2.536618@3] get_free_node 55: bitmap=fffff [ 2.541070@3] get_free_node 43: bitmap=fffff [ 2.545112@3] get_free_node 55: bitmap=1fffff [ 2.549444@3] ndtb : phy_blk_addr=41, ec=0, phy_page_addr=0, timestamp=2 [ 2.556115@3] ndtb free list: [ 2.559046@3] blockN=40, ec=-1, dirty_flag=0 [ 2.563309@3] blockN=42, ec=-1, dirty_flag=0 [ 2.567556@3] blockN=43, ec=-1, dirty_flag=0 [ 2.571803@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.589984@3] ndtb valid addr: 520000 [ 2.590018@3] nddr: info size=0x20000 max_scan_blk=46, start_blk=44 [ 2.594475@3] get_free_node 43: bitmap=1fffff [ 2.598602@3] get_free_node 55: bitmap=3fffff [ 2.603141@3] get_free_node 43: bitmap=3fffff [ 2.607269@3] get_free_node 55: bitmap=7fffff [ 2.611602@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 [ 2.618271@3] nddr free list: [ 2.621220@3] blockN=44, ec=-1, dirty_flag=0 [ 2.625466@3] blockN=45, ec=-1, dirty_flag=0 [ 2.629713@3] aml_nand_scan_rsv_info 1141: page_num=64 [ 2.634826@3] nddr valid addr: fffffffffffe0000 [ 2.639333@3] aml_nand_ddr_check 1281 NO ddr exist [ 2.644103@3] tpl: off 8388608, size 8388608 [ 2.778313@3] Creating 6 MTD partitions on "nandnormal": [ 2.778361@3] 0x000000800000-0x000001000000 : "tpl" [ 2.790554@3] 0x000001000000-0x000001200000 : "misc" [ 2.794275@1] 0x000001200000-0x000002200000 : "recovery" [ 2.806079@3] 0x000002200000-0x000004200000 : "boot" [ 2.825730@3] 0x000004200000-0x000004700000 : "config" [ 2.830530@3] 0x000004700000-0x000010000000 : "nvdata" [ 2.933787@2] nandnormal initialized ok [ 2.933900@2] aml_ubootenv_init: register env chardev [ 2.937629@2] aml_ubootenv_init: register env chardev OK [ 2.942473@2] amlnf_dtb_init: register dtb cdev [ 2.947471@2] amlnf_dtb_init: register dtd cdev OK [ 2.951639@2] mtd_nand_probe 267 , err = 0 [ 2.956795@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 2.962236@0] input: aml_vkeypad as /devices/platform/rtc/input/input0 [ 2.969399@2] unifykey: storage in base: 0xffffffc005000000 [ 2.973826@2] unifykey: storage out base: 0xffffffc005040000 [ 2.979424@2] unifykey: storage block base: 0xffffffc005080000 [ 2.985227@2] unifykey: probe done! [ 2.989425@2] unifykey: no efuse-version set, use default value: -1 [ 2.994952@2] unifykey: key unify config unifykey-num is 6 [ 3.000597@2] unifykey: key unify fact unifykey-num is 6 [ 3.005694@2] unifykey: unifykey_devno: f200000 [ 3.010812@0] unifykey: device unifykeys created ok [ 3.015178@0] unifykey: aml_unifykeys_init done! [ 3.020083@0] sysled: module init [ 3.023547@0] meson_wdt ffd0f0d0.watchdog: start watchdog [ 3.028318@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 3.035820@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 3.044496@1] dmc_monitor_probe [ 3.045337@1] page_trace_module_init, create sysfs failed [ 3.051208@1] defendkey defendkey: Reserved memory is not enough! [ 3.056457@1] defendkey: probe of defendkey failed with error -22 [ 3.062756@1] GACT probability NOT on [ 3.066128@1] Mirror/redirect action on [ 3.069919@1] u32 classifier [ 3.072766@1] Actions configured [ 3.076324@1] Netfilter messages via NETLINK v0.30. [ 3.081611@1] nf_conntrack version 0.5.0 (2048 buckets, 8192 max) [ 3.087866@1] ctnetlink v0.93: registering with nfnetlink. [ 3.093664@1] xt_time: kernel timezone is -0000 [ 3.097392@1] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.104091@1] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.108748@1] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.114201@1] Initializing XFRM netlink socket [ 3.119821@1] NET: Registered protocol family 10 [ 3.125705@1] mip6: Mobile IPv6 [ 3.126268@1] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.132256@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.140363@1] NET: Registered protocol family 17 [ 3.142478@1] NET: Registered protocol family 15 [ 3.147126@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.160274@1] l2tp_core: L2TP core driver, V2.0 [ 3.164653@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.169579@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.175333@1] l2tp_netlink: L2TP netlink interface [ 3.180152@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.186194@1] l2tp_debugfs: L2TP debugfs support [ 3.190828@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.197395@1] NET: Registered protocol family 35 [ 3.202335@1] Key type dns_resolver registered [ 3.206898@1] Registered swp emulation handler [ 3.210843@1] Registered cp15_barrier emulation handler [ 3.216022@1] Registered setend emulation handler [ 3.220710@1] disable EAS feature [ 3.225331@0] registered taskstats version 1 [ 3.242470@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 3.748938@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.749029@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.757373@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010 [ 3.765757@2] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000 [ 3.773260@1] hub 1-0:1.0: USB hub found [ 3.775714@1] hub 1-0:1.0: 1 port detected [ 3.780322@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.785329@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 3.793229@1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.802763@2] hub 2-0:1.0: USB hub found [ 3.805325@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 3.812607@2] usb usb2: Unsupported the hub [ 3.817474@2] aml_vrtc rtc: setting system clock to 2022-09-13 11:21:32 UTC (1663068092) [ 3.825444@2] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00e1c3000) [ 3.825519@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 3.833423@2] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000 [ 3.833436@2] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00c2d4600 [ 3.934001@2] dwc_otg: Core Release: 3.10a [ 3.934054@2] dwc_otg: Setting default values for core params [ 3.938243@2] dwc_otg: curmode: 0, host_only: 0 [ 3.942748@2] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT [ 3.955284@2] dwc_otg: Using Buffer DMA mode [ 3.955322@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 3.959225@2] dwc_otg: Working on port type = SLAVE [ 3.964083@2] dwc_otg: Dedicated Tx FIFOs mode [ 3.971528@2] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22 [ 3.977797@2] cpucore_cooling_register, max_cpu_core_num:4 [ 3.990743@2] gxbb_pm: enter meson_pm_probe! [ 3.990801@2] no vddio3v3_en pin [ 3.992575@2] pm-meson aml_pm: Can't get switch_clk81 [ 3.997553@2] gxbb_pm: meson_pm_probe done [ 4.002467@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200 [ 4.008920@2] Freeing unused kernel memory: 3648K [ 4.023884@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200 [ 4.281083@3] ubi0: attaching mtd5 [ 4.301049@3] ubi0: scanning is finished [ 4.306016@0] ubi0: attached mtd5 (name "config", size 5 MiB) [ 4.306143@0] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 4.313204@0] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 4.320110@0] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 4.327221@0] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0 [ 4.333283@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 4.340656@0] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1448630419 [ 4.349920@0] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4 [ 4.359140@3] ubi0: background thread "ubi_bgt0d" started, PID 1076 [ 4.372310@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1080 [ 4.417468@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data" [ 4.419896@2] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 4.429918@2] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) [ 4.440140@2] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB) [ 4.446730@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 1389A9A0-1538-4FA7-9CFF-77C48A2C6155, small LPT model [ 4.471557@3] ubi2: attaching mtd6 [ 5.189904@3] ubi2: scanning is finished [ 5.197399@2] ubi2: attached mtd6 (name "nvdata", size 185 MiB) [ 5.197700@2] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 5.204762@2] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 5.211677@2] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 5.218771@2] ubi2: good PEBs: 1480, bad PEBs: 0, corrupted PEBs: 0 [ 5.225019@2] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.232378@2] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2510600237 [ 5.241658@2] ubi2: available PEBs: 0, total reserved PEBs: 1480, PEBs reserved for bad PEB handling: 4 [ 5.251031@0] ubi2: background thread "ubi_bgt2d" started, PID 1088 [ 5.264348@3] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1092 [ 5.308615@1] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdata_data" [ 5.311002@1] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 5.321089@1] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs) [ 5.331898@1] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.338660@1] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID AA7E237E-83AF-4840-9629-6C7C6A7B8465, small LPT model [ 5.594376@3] eth0: device MAC address 02:f2:d9:20:05:70 [ 5.677038@0] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP. [ 5.678315@0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.910506@2] uart_trans: loading out-of-tree module taints kernel. [ 5.912896@2] register uart_trans chrdev success. [ 5.916279@2] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600 [ 5.923890@2] tty port open success [/dev/ttyS3]! [ 5.928524@2] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200 [ 5.937058@2] init sucess for tty struct (246:3) [/dev/ttyS3] [ 5.943042@2] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600 [ 5.950711@2] tty port open success [/dev/ttyS2]! [ 5.955399@2] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200 [ 5.963782@2] init sucess for tty struct (246:2) [/dev/ttyS2] [ 5.969877@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600 [ 5.977564@2] tty port open success [/dev/ttyS1]! [ 5.982252@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200 [ 5.990650@2] init sucess for tty struct (246:1) [/dev/ttyS1] [ 5.996889@0] create workqueue success! [ 8.755670@0] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 8.758971@0] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 24.900465@0] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. ===========================================Miner log=========================================== 2022-09-13 11:21:39 Miner compile time: Wed Oct 20 17:50:59 CST 2021 type: Antminer S19 2022-09-13 11:21:40 This is fix-freq version 2022-09-13 11:21:40 Miner compile time: Wed Oct 20 17:50:59 CST 2021 type: Antminer S19 2022-09-13 11:21:40 commit version: ce69be1 2021-10-19 19:57:55, build by: jenkins 2021-10-20 18:33:58 2022-09-13 11:21:40 opt_multi_version = 1 2022-09-13 11:21:40 opt_bitmain_ab = 1 2022-09-13 11:21:40 mid_auto_gen = 1 2022-09-13 11:21:40 opt_bitmain_work_mode = 0 2022-09-13 11:21:40 port 439 already exported 2022-09-13 11:21:40 port 454 already exported 2022-09-13 11:21:40 port 440 already exported 2022-09-13 11:21:40 port 455 already exported 2022-09-13 11:21:40 port 441 already exported 2022-09-13 11:21:40 port 456 already exported 2022-09-13 11:21:40 port 438 already exported 2022-09-13 11:21:40 port 453 already exported 2022-09-13 11:21:40 port 446 already exported 2022-09-13 11:21:40 port 445 already exported 2022-09-13 11:21:40 Note: front fan is power on! 2022-09-13 11:21:40 Note: rear fan is power on! 2022-09-13 11:21:40 start the http log. 2022-09-13 11:21:40 httpListenThread start ret=0 2022-09-13 11:21:40 start listen on 6060 ... 2022-09-13 11:21:40 load machine BHB42801 conf 2022-09-13 11:21:40 machine : BHB42801 2022-09-13 11:21:40 chain_num 4, chain_domain_num 44, chain_asic_num 88, domain_asic_num 2 2022-09-13 11:21:40 bad chain id = 3 2022-09-13 11:21:43 bad chain id = 3 2022-09-13 11:21:45 ==========================capability start========================== 2022-09-13 11:21:45 board num = 3 2022-09-13 11:21:45 board id = 0, chain num = 1 2022-09-13 11:21:45 chain id = 0 2022-09-13 11:21:45 board id = 1, chain num = 1 2022-09-13 11:21:45 chain id = 1 2022-09-13 11:21:45 board id = 2, chain num = 1 2022-09-13 11:21:45 chain id = 2 2022-09-13 11:21:45 ==========================capability end============================ 2022-09-13 11:21:45 chain num = 3 2022-09-13 11:21:46 load chain 0 eeprom data 2022-09-13 11:21:46 FW type BHB42801, eeprom[0] shows BHB42831 2022-09-13 11:21:47 load chain 1 eeprom data 2022-09-13 11:21:47 FW type BHB42801, eeprom[1] shows BHB42831 2022-09-13 11:21:48 load chain 2 eeprom data 2022-09-13 11:21:48 FW type BHB42801, eeprom[2] shows BHB42831 2022-09-13 11:21:48 Sweep error string = J7:4. 2022-09-13 11:21:48 Fixture data load failed, exit. 2022-09-13 11:21:48 ERROR_SOC_INIT: basic init failed! 2022-09-13 11:21:48 stop_mining: basic init failed! 2022-09-13 11:21:48 ****power off hashboard**** 2022-09-13 11:21:49 fail to write 0:7 2022-09-13 11:21:49 fail to write 1:7 2022-09-13 11:21:49 fail to write 2:7 2022-09-13 11:21:49 fail to write 3:7 2022-09-13 11:21:49 fail to write 4:7 2022-09-13 11:21:49 fail to write 5:7 2022-09-13 11:21:49 fail to write 6:7 2022-09-13 11:21:49 fail to read 0:2 2022-09-13 11:21:49 fail to read 1:2 2022-09-13 11:21:49 _bitmain_pic_disable_dc_dc_common failed! read_back_data[0] = 0x00, read_back_data[1] = 0x00 2022-09-13 11:21:49 fail to write 0:7 2022-09-13 11:21:49 fail to write 1:7 2022-09-13 11:21:49 fail to write 2:7 2022-09-13 11:21:49 fail to write 3:7 2022-09-13 11:21:49 fail to write 4:7 2022-09-13 11:21:49 fail to write 5:7 2022-09-13 11:21:49 fail to write 6:7 2022-09-13 11:21:50 fail to read 0:2 2022-09-13 11:21:50 fail to read 1:2 2022-09-13 11:21:50 _bitmain_pic_disable_dc_dc_common failed! read_back_data[0] = 0x00, read_back_data[1] = 0x00 2022-09-13 11:21:50 fail to write 0:7 2022-09-13 11:21:50 fail to write 1:7 2022-09-13 11:21:50 fail to write 2:7 2022-09-13 11:21:50 fail to write 3:7 2022-09-13 11:21:50 fail to write 4:7 2022-09-13 11:21:50 fail to write 5:7 2022-09-13 11:21:50 fail to write 6:7 2022-09-13 11:21:50 fail to read 0:2 2022-09-13 11:21:50 fail to read 1:2 2022-09-13 11:21:50 _bitmain_pic_disable_dc_dc_common failed! read_back_data[0] = 0x00, read_back_data[1] = 0x00
-
We recommend that you go to https://support.bitmain.com/hc/en-us click Submit a request at the bottom of the website, and select the correct ticket type.
We will reply to your question as soon as possible.
请先登录再写评论。
评论
6 条评论