S9I that fail in series!?!
Answered
Hello,
I'm contacting you to ask for advice.
I have 6 new S9I miners that I bought during a destocking of a mining company.
Problem is that all the cards fail one after the other!
I lost 12 cards out of 18 in 30 days.
I am running on a normal voltage setting, no overclocking.
My room is well ventilated, never below 10°C and for the moment maximum 25°C, humidity between 40 and 70%.
I have several cards that were working very well and suddenly stopped for no reason, the 63 Asics are still visible, but the temperature sensors show 0°C.
I have others that went from 63 Asics to 0 and never worked again.
Or some that show 63, then for example 22, and 39, etc... exceptionally a card shows 63 Asics again, mines for a few seconds and stops again.
I have two miners that restart in a loop as soon as the cards start to heat up, the fans go to 100% and stop mining. I have to do either a reboot or a change of settings to get it going again for a few seconds to a few minutes depending on the power limit I ask them to.
I tried with several original Bitmain software versions, but nothing better.
What could it be?
Control card problem?
Being stored for 3 years in a shed?
The components have deteriorated from not being used?
I hope you can help me.
Thanks in advance
Mickael
-
Official comment
Dear
Could you please send us the kernel log, the screen prints of the miner status and the miner overview while the machine is running. The miner overview page is in the System tab. We will review and advise as to next steps.
Comment actions -
Hello,
This is what you asked me.
This is my minor N°6.
Card 6 and 7 lost in a few days.
As soon as the miner heats up it stops mining and restarts.
Thanks for your help.
Mickael[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
[ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
[ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
[ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000296] ps7-ttc #0 at df804000, irq=43
[ 0.000599] Console: colour dummy device 80x30
[ 0.000628] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040199] pid_max: default: 32768 minimum: 301
[ 0.040409] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040429] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042622] CPU: Testing write buffer coherency: ok
[ 0.042937] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042995] Setting up static identity map for 0x4cb118 - 0x4cb170
[ 0.043215] L310 cache controller enabled
[ 0.043234] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120988] CPU1: Booted secondary processor
[ 0.210220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210353] Brought up 2 CPUs
[ 0.210372] SMP: Total of 2 processors activated.
[ 0.210381] CPU: All CPU(s) started in SVC mode.
[ 0.211037] devtmpfs: initialized
[ 0.213474] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214676] regulator-dummy: no parameters
[ 0.221684] NET: Registered protocol family 16
[ 0.223963] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226241] cpuidle: using governor ladder
[ 0.226255] cpuidle: using governor menu
[ 0.233628] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235147] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235161] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235275] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257266] bio: create slab <bio-0> at 0
[ 0.258639] vgaarb: loaded
[ 0.259331] SCSI subsystem initialized
[ 0.260796] usbcore: registered new interface driver usbfs
[ 0.260985] usbcore: registered new interface driver hub
[ 0.261332] usbcore: registered new device driver usb
[ 0.261858] media: Linux media interface: v0.10
[ 0.262017] Linux video capture interface: v2.00
[ 0.262263] pps_core: LinuxPPS API ver. 1 registered
[ 0.262275] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262397] PTP clock support registered
[ 0.262748] EDAC MC: Ver: 3.0.0
[ 0.263959] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266667] DMA-API: preallocated 4096 debug entries
[ 0.266680] DMA-API: debugging enabled by kernel config
[ 0.266756] Switched to clocksource arm_global_timer
[ 0.287014] NET: Registered protocol family 2
[ 0.287663] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.287720] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.287806] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.287850] TCP: reno registered
[ 0.287866] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287898] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288143] NET: Registered protocol family 1
[ 0.288443] RPC: Registered named UNIX socket transport module.
[ 0.288455] RPC: Registered udp transport module.
[ 0.288463] RPC: Registered tcp transport module.
[ 0.288471] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288483] PCI: CLS 0 bytes, default 64
[ 0.288912] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.290912] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293020] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293200] msgmni has been set to 967
[ 0.293969] io scheduler noop registered
[ 0.293982] io scheduler deadline registered
[ 0.294019] io scheduler cfq registered (default)
[ 0.306444] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.306464] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.430146] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.997167] console [ttyPS0] enabled
[ 1.001435] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.009074] [drm] Initialized drm 1.1.0 20060810
[ 1.026214] brd: module loaded
[ 1.035617] loop: module loaded
[ 1.045031] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.051110] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.058999] libphy: XEMACPS mii bus: probed
[ 1.063371] ------------- phy_id = 0x3625e62
[ 1.068313] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.076970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.083590] ehci-pci: EHCI PCI platform driver
[ 1.090822] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.097676] usbcore: registered new interface driver usb-storage
[ 1.104516] mousedev: PS/2 mouse device common for all mice
[ 1.110640] i2c /dev entries driver
[ 1.117573] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.123056] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.128980] Xilinx Zynq CpuIdle Driver started
[ 1.133815] sdhci: Secure Digital Host Controller Interface driver
[ 1.139938] sdhci: Copyright(c) Pierre Ossman
[ 1.144251] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.151132] mmc0: no vqmmc regulator found
[ 1.155148] mmc0: no vmmc regulator found
[ 1.196777] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.205500] usbcore: registered new interface driver usbhid
[ 1.211020] usbhid: USB HID core driver
[ 1.215717] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.222021] nand: Micron MT29F2G08ABAEAWP
[ 1.225985] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.231925] Bad block table found at page 131008, version 0x01
[ 1.238155] Bad block table found at page 130944, version 0x01
[ 1.244203] 3 ofpart partitions found on MTD device pl353-nand
[ 1.249985] Creating 3 MTD partitions on "pl353-nand":
[ 1.255075] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.263117] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.270429] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.281179] TCP: cubic registered
[ 1.284410] NET: Registered protocol family 17
[ 1.289125] Registering SWP/SWPB emulation handler
[ 1.294983] regulator-dummy: disabling
[ 1.299314] UBI: attaching mtd1 to ubi0
[ 1.684920] UBI: scanning is finished
[ 1.696789] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.703845] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.710629] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.717315] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.724155] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.730164] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.737275] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1495195
[ 1.746029] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.755258] UBI: background thread "ubi_bgt0d" started, PID 1084
[ 1.755263] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.759279] ALSA device list:
[ 1.759283] No soundcards found.
[ 1.776032] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[ 1.887487] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.893411] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.902544] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.912426] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 1.917467] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 5738C7A7-BFF6-4ED2-9D03-AA7C4A93929C, small LPT model
[ 1.957721] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 1.981812] devtmpfs: mounted
[ 1.984917] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[ 3.065759] random: dd urandom read with 1 bits of entropy available
[ 3.656801]
[ 3.656801] bcm54xx_config_init
[ 4.746777]
[ 4.746777] bcm54xx_config_init
[ 8.747625] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 8.753734] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 23.288982] In axi fpga driver!
[ 23.292049] request_mem_region OK!
[ 23.295441] AXI fpga dev virtual address is 0xdf9fe000
[ 23.300575] *base_vir_addr = 0xc51e
[ 23.315496] In fpga mem driver!
[ 23.318771] request_mem_region OK!
[ 23.322269] fpga mem virtual address is 0xe2000000
[ 24.096803]
[ 24.096803] bcm54xx_config_init
[ 25.186776]
[ 25.186776] bcm54xx_config_init
[ 29.187626] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 29.193735] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 359.973276] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram: 507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fb4000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5dad000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912
main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 8158f50e75104814
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[26] has core num=2
main.c:9113: Chain[7] ASIC[43] has core num=1
main.c:9113: Chain[7] ASIC[44] has core num=1
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=40 on chain[5], value=920
main.c:9183: get PIC voltage=40 on chain[6], value=920
main.c:9183: get PIC voltage=40 on chain[7], value=920
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 2262 root 0:00 grep bmminermain.c:14758: bmminer not found, restart bmminer ...
main.c:13927: bmminer not found= 1616 root 0:00 grep bmminermain.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:26 CST 2019 type: Antminer S9i
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 8158f50e75104814
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4a 0x00 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x07 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J6] has backup chain_voltage=870
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4a 0x00 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x07 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=870
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J8] has backup chain_voltage=890
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=6 value=940
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J6] will use backup chain_voltage_pic=870 [125]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J6] get working chain_voltage_pic=125
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=6 value=940
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J7] will use backup chain_voltage_pic=870 [125]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J7] get working chain_voltage_pic=125
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=6 value=940
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J8] will use backup chain_voltage_pic=890 [91]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J8] get working chain_voltage_pic=91
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 19 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 19 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 62 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 19 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 19 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 19 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 19 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 35 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 35 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 35 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 35 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 35 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 35 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 35 asic
driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4531:set_frequency: Chain[J7] has core num in PIC
driver-btm-c5.c:4531:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[26] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[43] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[44] has core num=1
driver-btm-c5.c:4571:set_frequency: miner total rate=13865GH/s ideal_total_hash_rate = 13500GH/s
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=650
driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=650driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4598:set_frequency: Chain:6 chipnum=19
driver-btm-c5.c:4618:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:6 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650
driver-btm-c5.c:4809:set_frequency: Chain:6 max freq=650
driver-btm-c5.c:4810:set_frequency: Chain:6 min freq=650driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4598:set_frequency: Chain:7 chipnum=35
driver-btm-c5.c:4618:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:7 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631
driver-btm-c5.c:4809:set_frequency: Chain:7 max freq=631
driver-btm-c5.c:4810:set_frequency: Chain:7 min freq=631
driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:4263:ProcessFixFreqForChips: totalRate = 13865, fixed_totalRate = 13635
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=650
driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=650driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4855:set_frequency: Chain:6 chipnum=19
driver-btm-c5.c:4874:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:6 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650
driver-btm-c5.c:5110:set_frequency: Chain:6 max freq=650
driver-btm-c5.c:5111:set_frequency: Chain:6 min freq=650driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4855:set_frequency: Chain:7 chipnum=35
driver-btm-c5.c:4874:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:7 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631
driver-btm-c5.c:5110:set_frequency: Chain:7 max freq=631
driver-btm-c5.c:5111:set_frequency: Chain:7 min freq=631driver-btm-c5.c:5119:set_frequency: max freq = 650
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 13865, fixed_totalRate = 13500
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:21 remote:24 offset:26
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=26 typeID=55
driver-btm-c5.c:13651:bitmain_c5_init: single board rate=4668 voltage limit=880 on chain[5]
driver-btm-c5.c:13688:bitmain_c5_init: get PIC voltage=870 on chain[5], check: must be < 880
driver-btm-c5.c:13651:bitmain_c5_init: single board rate=4668 voltage limit=880 on chain[6]
driver-btm-c5.c:13688:bitmain_c5_init: get PIC voltage=870 on chain[6], check: must be < 880
driver-btm-c5.c:13651:bitmain_c5_init: single board rate=4529 voltage limit=890 on chain[7]
driver-btm-c5.c:13688:bitmain_c5_init: get PIC voltage=890 on chain[7], check: must be < 890
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 870
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 870
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=1038 total_tv_end_sys=1039
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = 39
do read_temp_func once...get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=78.1310 Asic[02]=73.5680 Asic[03]=73.0140 Asic[04]=71.7560 Asic[05]=73.2820 Asic[06]=76.3360 Asic[07]=79.7580 Asic[08]=70.1620
Asic[09]=73.0470 Asic[10]=76.9060 Asic[11]=69.2220 Asic[12]=72.2930 Asic[13]=74.6920 Asic[14]=70.6820 Asic[15]=75.1110 Asic[16]=73.1150
Asic[17]=75.3460 Asic[18]=78.5340 Asic[19]=72.4100 Asic[20]=73.6850 Asic[21]=69.9940 Asic[22]=75.7320 Asic[23]=71.5380 Asic[24]=75.0610
Asic[25]=71.0680 Asic[26]=68.8530 Asic[27]=71.1520 Asic[28]=74.0210 Asic[29]=79.5400 Asic[30]=77.1910 Asic[31]=73.3660 Asic[32]=72.3930
Asic[33]=78.6010 Asic[34]=77.0910 Asic[35]=72.7790 Asic[36]=74.1210 Asic[37]=75.8330 Asic[38]=79.7920 Asic[39]=79.5070 Asic[40]=74.9270
Asic[41]=76.1010 Asic[42]=77.3760 Asic[43]=76.1680 Asic[44]=82.7780 Asic[45]=78.3830 Asic[46]=72.0070 Asic[47]=75.9160 Asic[48]=77.5270
Asic[49]=72.8630 Asic[50]=72.5440 Asic[51]=76.9060 Asic[52]=71.2690 Asic[53]=72.9130 Asic[54]=76.5370 Asic[55]=70.2790 Asic[56]=73.4000
Asic[57]=76.8390 Asic[58]=72.2250 Asic[59]=72.0410 Asic[60]=73.7190 Asic[61]=71.3190 Asic[62]=68.4840 Asic[63]=76.3190get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=52
Chain[5] Chip[62] junction temperature=62
Special fix Chain[5] Chip[62] middle Temp = 67
Done read temp on Chain[5]
Done read temp on Chain[6]
Done read temp on Chain[7]
Max pcb temp : 52
set FAN speed according to: temp_highest=52 temp_top1[PWM_T]=52 temp_top1[TEMP_POS_LOCAL]=52 temp_change=-1 fix_fan_steps=0
FAN PWM: 56
read_temp_func Done!
CRC error counter=2976
-
Dear MiniMike
the Asic can not be detected all
1.flash the SD card program to recover the control board
Please download the SD card file in the below linkhttps://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image
instructions:2 clean the dust for the antminer
-
I just did the procedure as you asked, I took the file for the S9i.
Unfortunately no improvement, it does not work better and restarts in a loop as soon as it starts to heat up.
In normal power mode as soon as it starts to mine it restarts in less than a minute.
In -3Th/s mode, it restarts less often about every 10 minutes.
At the first reboot I could see the three cards, but then N°7 or N°8 disappeared and they reappeared from time to time when I refresh.
Here is the Kernel Log again in case it changes something that could guide you.
Here is the screenshot in -3Th/s power mode.
Thanks
Mickael[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000289] ps7-ttc #0 at df804000, irq=43
[ 0.000593] Console: colour dummy device 80x30
[ 0.000621] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.090238] pid_max: default: 32768 minimum: 301
[ 0.090447] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090467] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.092616] CPU: Testing write buffer coherency: ok
[ 0.092926] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.092982] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.093199] L310 cache controller enabled
[ 0.093218] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.170982] CPU1: Booted secondary processor
[ 0.260215] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.260347] Brought up 2 CPUs
[ 0.260366] SMP: Total of 2 processors activated.
[ 0.260374] CPU: All CPU(s) started in SVC mode.
[ 0.261031] devtmpfs: initialized
[ 0.263432] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.264604] regulator-dummy: no parameters
[ 0.271968] NET: Registered protocol family 16
[ 0.274149] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.276410] cpuidle: using governor ladder
[ 0.276423] cpuidle: using governor menu
[ 0.283707] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.285204] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.285217] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.285326] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.306923] bio: create slab <bio-0> at 0
[ 0.308308] vgaarb: loaded
[ 0.309006] SCSI subsystem initialized
[ 0.309868] usbcore: registered new interface driver usbfs
[ 0.310054] usbcore: registered new interface driver hub
[ 0.310903] usbcore: registered new device driver usb
[ 0.311736] media: Linux media interface: v0.10
[ 0.311893] Linux video capture interface: v2.00
[ 0.312130] pps_core: LinuxPPS API ver. 1 registered
[ 0.312142] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.312261] PTP clock support registered
[ 0.312609] EDAC MC: Ver: 3.0.0
[ 0.313648] Advanced Linux Sound Architecture Driver Initialized.
[ 0.316364] DMA-API: preallocated 4096 debug entries
[ 0.316378] DMA-API: debugging enabled by kernel config
[ 0.316445] Switched to clocksource arm_global_timer
[ 0.336508] NET: Registered protocol family 2
[ 0.337152] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.337208] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.337293] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.337347] TCP: reno registered
[ 0.337363] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.337393] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.337618] NET: Registered protocol family 1
[ 0.337957] RPC: Registered named UNIX socket transport module.
[ 0.337969] RPC: Registered udp transport module.
[ 0.337977] RPC: Registered tcp transport module.
[ 0.337985] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.337997] PCI: CLS 0 bytes, default 64
[ 0.338421] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.340402] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.342457] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.342660] msgmni has been set to 967
[ 0.343421] io scheduler noop registered
[ 0.343433] io scheduler deadline registered
[ 0.343475] io scheduler cfq registered (default)
[ 0.356518] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.356538] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.478038] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.045700] console [ttyPS0] enabled
[ 1.049951] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.057594] [drm] Initialized drm 1.1.0 20060810
[ 1.074377] brd: module loaded
[ 1.083695] loop: module loaded
[ 1.093058] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.098898] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.106608] libphy: XEMACPS mii bus: probed
[ 1.110976] ------------- phy_id = 0x3625e62
[ 1.115677] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.124574] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.131418] ehci-pci: EHCI PCI platform driver
[ 1.138642] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.145439] usbcore: registered new interface driver usb-storage
[ 1.152299] mousedev: PS/2 mouse device common for all mice
[ 1.158411] i2c /dev entries driver
[ 1.165252] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.170768] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.176667] Xilinx Zynq CpuIdle Driver started
[ 1.181505] sdhci: Secure Digital Host Controller Interface driver
[ 1.187649] sdhci: Copyright(c) Pierre Ossman
[ 1.191942] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.198801] mmc0: no vqmmc regulator found
[ 1.202813] mmc0: no vmmc regulator found
[ 1.246469] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.255128] usbcore: registered new interface driver usbhid
[ 1.260637] usbhid: USB HID core driver
[ 1.265337] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.271634] nand: Micron MT29F2G08ABAEAWP
[ 1.275603] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.281540] Bad block table found at page 131008, version 0x01
[ 1.287762] Bad block table found at page 130944, version 0x01
[ 1.293816] 3 ofpart partitions found on MTD device pl353-nand
[ 1.299607] Creating 3 MTD partitions on "pl353-nand":
[ 1.304693] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.312735] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.320024] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.328913] TCP: cubic registered
[ 1.332145] NET: Registered protocol family 17
[ 1.336849] Registering SWP/SWPB emulation handler
[ 1.342693] regulator-dummy: disabling
[ 1.347010] UBI: attaching mtd1 to ubi0
[ 1.744292] UBI: scanning is finished
[ 1.756073] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.763149] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.769912] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.776598] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.783434] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.789435] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.796558] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1111531575
[ 1.805569] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.814801] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.814806] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.818702] ALSA device list:
[ 1.818706] No soundcards found.
[ 1.835550] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.956936] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.962864] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.971996] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.981880] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 1.986920] UBIFS: media format: w4/r0 (latest is w4/r0), UUID DF3D9FA6-7EB8-4015-899C-12F54E31C60D, small LPT model
[ 2.009780] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.058112] devtmpfs: mounted
[ 2.061220] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 3.156007] random: dd urandom read with 0 bits of entropy available
[ 3.776513]
[ 3.776513] bcm54xx_config_init
[ 4.856498]
[ 4.856498] bcm54xx_config_init
[ 8.857320] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 8.863427] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 23.427963] In axi fpga driver!
[ 23.431028] request_mem_region OK!
[ 23.434418] AXI fpga dev virtual address is 0xdf9fc000
[ 23.439553] *base_vir_addr = 0xc51e
[ 23.454413] In fpga mem driver!
[ 23.457737] request_mem_region OK!
[ 23.461249] fpga mem virtual address is 0xe2000000
[ 24.236464]
[ 24.236464] bcm54xx_config_init
[ 25.336468]
[ 25.336468] bcm54xx_config_init
[ 29.337311] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 29.343427] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 319.650261] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6f3d000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5d36000
forceFreq=-1 forceFlag=0
min work minertest[0]:912
DETECT HW version=0000c51e
miner ID : 8158f50e75104814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[26] has core num=2
Chain[7] ASIC[43] has core num=1
Chain[7] ASIC[44] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=57 on chain[5], value=910
get PIC voltage=57 on chain[6], value=910
get PIC voltage=57 on chain[7], value=910
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
total_exist_chain_num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found=23529 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 4798 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Mon Jul 1 11:54:32 CST 2019 type: Antminer S9i
miner ID : 8158f50e75104814
Checking fans...
get fan[4] speed=5160
get fan[4] speed=5160
get fan[5] speed=5760
get fan[4] speed=5160
get fan[5] speed=5760
get fan[4] speed=5160
get fan[5] speed=5760
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x4a 0x00 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x07 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=870
No scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x4a 0x00 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x07 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
No scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] original vol value=870 adjusted vol value:830
Chain[J6] orignal chain_voltage_pic=74 value=900
Chain[J6] original chain_voltage_value=870 adjusted chain_voltage_value:830, value=900
Chain[J6] will use backup chain_voltage_pic=830 [193]
Chain[J6] get working chain_voltage_pic=193
Chain[J6] Aisc[00] original freq=650 adjusted freq:525
Chain[J6] Aisc[01] original freq=650 adjusted freq:525
Chain[J6] Aisc[02] original freq=650 adjusted freq:525
Chain[J6] Aisc[03] original freq=650 adjusted freq:525
Chain[J6] Aisc[04] original freq=650 adjusted freq:525
Chain[J6] Aisc[05] original freq=650 adjusted freq:525
Chain[J6] Aisc[06] original freq=650 adjusted freq:525
Chain[J6] Aisc[07] original freq=650 adjusted freq:525
Chain[J6] Aisc[08] original freq=650 adjusted freq:525
Chain[J6] Aisc[09] original freq=650 adjusted freq:525
Chain[J6] Aisc[10] original freq=650 adjusted freq:525
Chain[J6] Aisc[11] original freq=650 adjusted freq:525
Chain[J6] Aisc[12] original freq=650 adjusted freq:525
Chain[J6] Aisc[13] original freq=650 adjusted freq:525
Chain[J6] Aisc[14] original freq=650 adjusted freq:525
Chain[J6] Aisc[15] original freq=650 adjusted freq:525
Chain[J6] Aisc[16] original freq=650 adjusted freq:525
Chain[J6] Aisc[17] original freq=650 adjusted freq:525
Chain[J6] Aisc[18] original freq=650 adjusted freq:525
Chain[J6] Aisc[19] original freq=650 adjusted freq:525
Chain[J6] Aisc[20] original freq=650 adjusted freq:525
Chain[J6] Aisc[21] original freq=650 adjusted freq:525
Chain[J6] Aisc[22] original freq=650 adjusted freq:525
Chain[J6] Aisc[23] original freq=650 adjusted freq:525
Chain[J6] Aisc[24] original freq=650 adjusted freq:525
Chain[J6] Aisc[25] original freq=650 adjusted freq:525
Chain[J6] Aisc[26] original freq=650 adjusted freq:525
Chain[J6] Aisc[27] original freq=650 adjusted freq:525
Chain[J6] Aisc[28] original freq=650 adjusted freq:525
Chain[J6] Aisc[29] original freq=650 adjusted freq:525
Chain[J6] Aisc[30] original freq=650 adjusted freq:525
Chain[J6] Aisc[31] original freq=650 adjusted freq:525
Chain[J6] Aisc[32] original freq=650 adjusted freq:525
Chain[J6] Aisc[33] original freq=650 adjusted freq:525
Chain[J6] Aisc[34] original freq=650 adjusted freq:525
Chain[J6] Aisc[35] original freq=650 adjusted freq:525
Chain[J6] Aisc[36] original freq=650 adjusted freq:525
Chain[J6] Aisc[37] original freq=650 adjusted freq:525
Chain[J6] Aisc[38] original freq=650 adjusted freq:525
Chain[J6] Aisc[39] original freq=650 adjusted freq:525
Chain[J6] Aisc[40] original freq=650 adjusted freq:525
Chain[J6] Aisc[41] original freq=650 adjusted freq:525
Chain[J6] Aisc[42] original freq=650 adjusted freq:525
Chain[J6] Aisc[43] original freq=650 adjusted freq:525
Chain[J6] Aisc[44] original freq=650 adjusted freq:525
Chain[J6] Aisc[45] original freq=650 adjusted freq:525
Chain[J6] Aisc[46] original freq=650 adjusted freq:525
Chain[J6] Aisc[47] original freq=650 adjusted freq:525
Chain[J6] Aisc[48] original freq=650 adjusted freq:525
Chain[J6] Aisc[49] original freq=650 adjusted freq:525
Chain[J6] Aisc[50] original freq=650 adjusted freq:525
Chain[J6] Aisc[51] original freq=650 adjusted freq:525
Chain[J6] Aisc[52] original freq=650 adjusted freq:525
Chain[J6] Aisc[53] original freq=650 adjusted freq:525
Chain[J6] Aisc[54] original freq=650 adjusted freq:525
Chain[J6] Aisc[55] original freq=650 adjusted freq:525
Chain[J6] Aisc[56] original freq=650 adjusted freq:525
Chain[J6] Aisc[57] original freq=650 adjusted freq:525
Chain[J6] Aisc[58] original freq=650 adjusted freq:525
Chain[J6] Aisc[59] original freq=650 adjusted freq:525
Chain[J6] Aisc[60] original freq=650 adjusted freq:525
Chain[J6] Aisc[61] original freq=650 adjusted freq:525
Chain[J6] Aisc[62] original freq=650 adjusted freq:525
Chain[J7] original vol value=870 adjusted vol value:830
Chain[J7] orignal chain_voltage_pic=57 value=910
Chain[J7] original chain_voltage_value=870 adjusted chain_voltage_value:830, value=910
Chain[J7] will use backup chain_voltage_pic=830 [193]
Chain[J7] get working chain_voltage_pic=193
Chain[J7] Aisc[00] original freq=650 adjusted freq:525
Chain[J7] Aisc[01] original freq=650 adjusted freq:525
Chain[J7] Aisc[02] original freq=650 adjusted freq:525
Chain[J7] Aisc[03] original freq=650 adjusted freq:525
Chain[J7] Aisc[04] original freq=650 adjusted freq:525
Chain[J7] Aisc[05] original freq=650 adjusted freq:525
Chain[J7] Aisc[06] original freq=650 adjusted freq:525
Chain[J7] Aisc[07] original freq=650 adjusted freq:525
Chain[J7] Aisc[08] original freq=650 adjusted freq:525
Chain[J7] Aisc[09] original freq=650 adjusted freq:525
Chain[J7] Aisc[10] original freq=650 adjusted freq:525
Chain[J7] Aisc[11] original freq=650 adjusted freq:525
Chain[J7] Aisc[12] original freq=650 adjusted freq:525
Chain[J7] Aisc[13] original freq=650 adjusted freq:525
Chain[J7] Aisc[14] original freq=650 adjusted freq:525
Chain[J7] Aisc[15] original freq=650 adjusted freq:525
Chain[J7] Aisc[16] original freq=650 adjusted freq:525
Chain[J7] Aisc[17] original freq=650 adjusted freq:525
Chain[J7] Aisc[18] original freq=650 adjusted freq:525
Chain[J7] Aisc[19] original freq=650 adjusted freq:525
Chain[J7] Aisc[20] original freq=650 adjusted freq:525
Chain[J7] Aisc[21] original freq=650 adjusted freq:525
Chain[J7] Aisc[22] original freq=650 adjusted freq:525
Chain[J7] Aisc[23] original freq=650 adjusted freq:525
Chain[J7] Aisc[24] original freq=650 adjusted freq:525
Chain[J7] Aisc[25] original freq=650 adjusted freq:525
Chain[J7] Aisc[26] original freq=650 adjusted freq:525
Chain[J7] Aisc[27] original freq=650 adjusted freq:525
Chain[J7] Aisc[28] original freq=650 adjusted freq:525
Chain[J7] Aisc[29] original freq=650 adjusted freq:525
Chain[J7] Aisc[30] original freq=650 adjusted freq:525
Chain[J7] Aisc[31] original freq=650 adjusted freq:525
Chain[J7] Aisc[32] original freq=650 adjusted freq:525
Chain[J7] Aisc[33] original freq=650 adjusted freq:525
Chain[J7] Aisc[34] original freq=650 adjusted freq:525
Chain[J7] Aisc[35] original freq=650 adjusted freq:525
Chain[J7] Aisc[36] original freq=650 adjusted freq:525
Chain[J7] Aisc[37] original freq=650 adjusted freq:525
Chain[J7] Aisc[38] original freq=650 adjusted freq:525
Chain[J7] Aisc[39] original freq=650 adjusted freq:525
Chain[J7] Aisc[40] original freq=650 adjusted freq:525
Chain[J7] Aisc[41] original freq=650 adjusted freq:525
Chain[J7] Aisc[42] original freq=650 adjusted freq:525
Chain[J7] Aisc[43] original freq=650 adjusted freq:525
Chain[J7] Aisc[44] original freq=650 adjusted freq:525
Chain[J7] Aisc[45] original freq=650 adjusted freq:525
Chain[J7] Aisc[46] original freq=650 adjusted freq:525
Chain[J7] Aisc[47] original freq=650 adjusted freq:525
Chain[J7] Aisc[48] original freq=650 adjusted freq:525
Chain[J7] Aisc[49] original freq=650 adjusted freq:525
Chain[J7] Aisc[50] original freq=650 adjusted freq:525
Chain[J7] Aisc[51] original freq=650 adjusted freq:525
Chain[J7] Aisc[52] original freq=650 adjusted freq:525
Chain[J7] Aisc[53] original freq=650 adjusted freq:525
Chain[J7] Aisc[54] original freq=650 adjusted freq:525
Chain[J7] Aisc[55] original freq=650 adjusted freq:525
Chain[J7] Aisc[56] original freq=650 adjusted freq:525
Chain[J7] Aisc[57] original freq=650 adjusted freq:525
Chain[J7] Aisc[58] original freq=650 adjusted freq:525
Chain[J7] Aisc[59] original freq=650 adjusted freq:525
Chain[J7] Aisc[60] original freq=650 adjusted freq:525
Chain[J7] Aisc[61] original freq=650 adjusted freq:525
Chain[J7] Aisc[62] original freq=650 adjusted freq:525
Chain[J8] original vol value=890 adjusted vol value:850
Chain[J8] orignal chain_voltage_pic=57 value=910
Chain[J8] original chain_voltage_value=890 adjusted chain_voltage_value:850, value=910
Chain[J8] will use backup chain_voltage_pic=850 [159]
Chain[J8] get working chain_voltage_pic=159
Chain[J8] Aisc[00] original freq=631 adjusted freq:504
Chain[J8] Aisc[01] original freq=631 adjusted freq:504
Chain[J8] Aisc[02] original freq=631 adjusted freq:504
Chain[J8] Aisc[03] original freq=631 adjusted freq:504
Chain[J8] Aisc[04] original freq=631 adjusted freq:504
Chain[J8] Aisc[05] original freq=631 adjusted freq:504
Chain[J8] Aisc[06] original freq=631 adjusted freq:504
Chain[J8] Aisc[07] original freq=631 adjusted freq:504
Chain[J8] Aisc[08] original freq=631 adjusted freq:504
Chain[J8] Aisc[09] original freq=631 adjusted freq:504
Chain[J8] Aisc[10] original freq=631 adjusted freq:504
Chain[J8] Aisc[11] original freq=631 adjusted freq:504
Chain[J8] Aisc[12] original freq=631 adjusted freq:504
Chain[J8] Aisc[13] original freq=631 adjusted freq:504
Chain[J8] Aisc[14] original freq=631 adjusted freq:504
Chain[J8] Aisc[15] original freq=631 adjusted freq:504
Chain[J8] Aisc[16] original freq=631 adjusted freq:504
Chain[J8] Aisc[17] original freq=631 adjusted freq:504
Chain[J8] Aisc[18] original freq=631 adjusted freq:504
Chain[J8] Aisc[19] original freq=631 adjusted freq:504
Chain[J8] Aisc[20] original freq=631 adjusted freq:504
Chain[J8] Aisc[21] original freq=631 adjusted freq:504
Chain[J8] Aisc[22] original freq=631 adjusted freq:504
Chain[J8] Aisc[23] original freq=631 adjusted freq:504
Chain[J8] Aisc[24] original freq=631 adjusted freq:504
Chain[J8] Aisc[25] original freq=631 adjusted freq:504
Chain[J8] Aisc[26] original freq=631 adjusted freq:504
Chain[J8] Aisc[27] original freq=631 adjusted freq:504
Chain[J8] Aisc[28] original freq=631 adjusted freq:504
Chain[J8] Aisc[29] original freq=631 adjusted freq:504
Chain[J8] Aisc[30] original freq=631 adjusted freq:504
Chain[J8] Aisc[31] original freq=631 adjusted freq:504
Chain[J8] Aisc[32] original freq=631 adjusted freq:504
Chain[J8] Aisc[33] original freq=631 adjusted freq:504
Chain[J8] Aisc[34] original freq=631 adjusted freq:504
Chain[J8] Aisc[35] original freq=631 adjusted freq:504
Chain[J8] Aisc[36] original freq=631 adjusted freq:504
Chain[J8] Aisc[37] original freq=631 adjusted freq:504
Chain[J8] Aisc[38] original freq=631 adjusted freq:504
Chain[J8] Aisc[39] original freq=631 adjusted freq:504
Chain[J8] Aisc[40] original freq=631 adjusted freq:504
Chain[J8] Aisc[41] original freq=631 adjusted freq:504
Chain[J8] Aisc[42] original freq=631 adjusted freq:504
Chain[J8] Aisc[43] original freq=631 adjusted freq:504
Chain[J8] Aisc[44] original freq=631 adjusted freq:504
Chain[J8] Aisc[45] original freq=631 adjusted freq:504
Chain[J8] Aisc[46] original freq=631 adjusted freq:504
Chain[J8] Aisc[47] original freq=631 adjusted freq:504
Chain[J8] Aisc[48] original freq=631 adjusted freq:504
Chain[J8] Aisc[49] original freq=631 adjusted freq:504
Chain[J8] Aisc[50] original freq=631 adjusted freq:504
Chain[J8] Aisc[51] original freq=631 adjusted freq:504
Chain[J8] Aisc[52] original freq=631 adjusted freq:504
Chain[J8] Aisc[53] original freq=631 adjusted freq:504
Chain[J8] Aisc[54] original freq=631 adjusted freq:504
Chain[J8] Aisc[55] original freq=631 adjusted freq:504
Chain[J8] Aisc[56] original freq=631 adjusted freq:504
Chain[J8] Aisc[57] original freq=631 adjusted freq:504
Chain[J8] Aisc[58] original freq=631 adjusted freq:504
Chain[J8] Aisc[59] original freq=631 adjusted freq:504
Chain[J8] Aisc[60] original freq=631 adjusted freq:504
Chain[J8] Aisc[61] original freq=631 adjusted freq:504
Chain[J8] Aisc[62] original freq=631 adjusted freq:504
Chain[J6] has 63 asic
Chain[J7] has 19 asic
retry Chain[J7] has 19 asic
retry Chain[J7] has 19 asic
retry Chain[J7] has 19 asic
retry Chain[J7] has 19 asic
retry Chain[J7] has 19 asic
retry Chain[J7] has 19 asic
Chain[J8] has 35 asic
retry Chain[J8] has 35 asic
retry Chain[J8] has 35 asic
retry Chain[J8] has 35 asic
retry Chain[J8] has 35 asic
retry Chain[J8] has 35 asic
retry Chain[J8] has 35 asic
Chain[J6] has core num in PIC
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
Chain[J8] ASIC[26] has core num=2
Chain[J8] ASIC[43] has core num=1
Chain[J8] ASIC[44] has core num=1
miner total rate=11158GH/s ideal_total_hash_rate = 11000GH/s
read PIC voltage=910 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=650
Asic[ 0]:525 Asic[ 1]:525 Asic[ 2]:525 Asic[ 3]:525 Asic[ 4]:525 Asic[ 5]:525 Asic[ 6]:525 Asic[ 7]:525
Asic[ 8]:525 Asic[ 9]:525 Asic[10]:525 Asic[11]:525 Asic[12]:525 Asic[13]:525 Asic[14]:525 Asic[15]:525
Asic[16]:525 Asic[17]:525 Asic[18]:525 Asic[19]:525 Asic[20]:525 Asic[21]:525 Asic[22]:525 Asic[23]:525
Asic[24]:525 Asic[25]:525 Asic[26]:525 Asic[27]:525 Asic[28]:525 Asic[29]:525 Asic[30]:525 Asic[31]:525
Asic[32]:525 Asic[33]:525 Asic[34]:525 Asic[35]:525 Asic[36]:525 Asic[37]:525 Asic[38]:525 Asic[39]:525
Asic[40]:525 Asic[41]:525 Asic[42]:525 Asic[43]:525 Asic[44]:525 Asic[45]:525 Asic[46]:525 Asic[47]:525
Asic[48]:525 Asic[49]:525 Asic[50]:525 Asic[51]:525 Asic[52]:525 Asic[53]:525 Asic[54]:525 Asic[55]:525
Asic[56]:525 Asic[57]:525 Asic[58]:525 Asic[59]:525 Asic[60]:525 Asic[61]:525 Asic[62]:525
Chain:5 max freq=525
Chain:5 min freq=525
read PIC voltage=910 on chain[6]
Chain:6 chipnum=19
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=650
Asic[ 0]:525 Asic[ 1]:525 Asic[ 2]:525 Asic[ 3]:525 Asic[ 4]:525 Asic[ 5]:525 Asic[ 6]:525 Asic[ 7]:525
Asic[ 8]:525 Asic[ 9]:525 Asic[10]:525 Asic[11]:525 Asic[12]:525 Asic[13]:525 Asic[14]:525 Asic[15]:525
Asic[16]:525 Asic[17]:525 Asic[18]:525
Chain:6 max freq=525
Chain:6 min freq=525
read PIC voltage=910 on chain[7]
Chain:7 chipnum=35
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:504 Asic[ 1]:504 Asic[ 2]:504 Asic[ 3]:504 Asic[ 4]:504 Asic[ 5]:504 Asic[ 6]:504 Asic[ 7]:504
Asic[ 8]:504 Asic[ 9]:504 Asic[10]:504 Asic[11]:504 Asic[12]:504 Asic[13]:504 Asic[14]:504 Asic[15]:504
Asic[16]:504 Asic[17]:504 Asic[18]:504 Asic[19]:504 Asic[20]:504 Asic[21]:504 Asic[22]:504 Asic[23]:504
Asic[24]:504 Asic[25]:504 Asic[26]:504 Asic[27]:504 Asic[28]:504 Asic[29]:504 Asic[30]:504 Asic[31]:504
Asic[32]:504 Asic[33]:504 Asic[34]:504
Chain:7 max freq=504
Chain:7 min freq=504
Miner fix freq ...
totalRate = 11158, fixed_totalRate = 11110
read PIC voltage=910 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=650
Asic[ 0]:525 Asic[ 1]:525 Asic[ 2]:525 Asic[ 3]:525 Asic[ 4]:525 Asic[ 5]:525 Asic[ 6]:525 Asic[ 7]:525
Asic[ 8]:525 Asic[ 9]:525 Asic[10]:525 Asic[11]:525 Asic[12]:525 Asic[13]:525 Asic[14]:525 Asic[15]:525
Asic[16]:525 Asic[17]:525 Asic[18]:525 Asic[19]:525 Asic[20]:525 Asic[21]:525 Asic[22]:525 Asic[23]:525
Asic[24]:525 Asic[25]:525 Asic[26]:525 Asic[27]:525 Asic[28]:525 Asic[29]:525 Asic[30]:525 Asic[31]:525
Asic[32]:525 Asic[33]:525 Asic[34]:525 Asic[35]:525 Asic[36]:525 Asic[37]:525 Asic[38]:525 Asic[39]:525
Asic[40]:525 Asic[41]:525 Asic[42]:525 Asic[43]:525 Asic[44]:525 Asic[45]:525 Asic[46]:525 Asic[47]:525
Asic[48]:525 Asic[49]:525 Asic[50]:525 Asic[51]:525 Asic[52]:525 Asic[53]:525 Asic[54]:525 Asic[55]:525
Asic[56]:525 Asic[57]:525 Asic[58]:525 Asic[59]:525 Asic[60]:525 Asic[61]:525 Asic[62]:525
Chain:5 max freq=525
Chain:5 min freq=525
read PIC voltage=910 on chain[6]
Chain:6 chipnum=19
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=650
Asic[ 0]:525 Asic[ 1]:525 Asic[ 2]:525 Asic[ 3]:525 Asic[ 4]:525 Asic[ 5]:525 Asic[ 6]:525 Asic[ 7]:525
Asic[ 8]:525 Asic[ 9]:525 Asic[10]:525 Asic[11]:525 Asic[12]:525 Asic[13]:525 Asic[14]:525 Asic[15]:525
Asic[16]:525 Asic[17]:525 Asic[18]:525
Chain:6 max freq=525
Chain:6 min freq=525
read PIC voltage=910 on chain[7]
Chain:7 chipnum=35
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:504 Asic[ 1]:504 Asic[ 2]:504 Asic[ 3]:504 Asic[ 4]:504 Asic[ 5]:504 Asic[ 6]:504 Asic[ 7]:504
Asic[ 8]:504 Asic[ 9]:504 Asic[10]:504 Asic[11]:504 Asic[12]:504 Asic[13]:504 Asic[14]:504 Asic[15]:504
Asic[16]:504 Asic[17]:504 Asic[18]:504 Asic[19]:504 Asic[20]:504 Asic[21]:504 Asic[22]:504 Asic[23]:504
Asic[24]:504 Asic[25]:504 Asic[26]:504 Asic[27]:504 Asic[28]:504 Asic[29]:504 Asic[30]:504 Asic[31]:504
Asic[32]:504 Asic[33]:504 Asic[34]:504
Chain:7 max freq=504
Chain:7 min freq=504
max freq = 525
totalRate = 11158, fixed_totalRate = 11000
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:19 remote:22 offset:26
Chain[J6] chip[244] get middle temp offset=26 typeID=55
single board rate=3770 voltage limit=940 on chain[5]
get PIC voltage=830 on chain[5], check: must be < 940
single board rate=3770 voltage limit=940 on chain[6]
get PIC voltage=830 on chain[6], check: must be < 940
single board rate=3617 voltage limit=940 on chain[7]
get PIC voltage=850 on chain[7], check: must be < 940
setting to working voltage...
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[5] set voltage to 880
chain[6] set voltage to 880
chain[7] set voltage to 880
chain[5] set voltage to 870
chain[6] set voltage to 870
chain[7] set voltage to 870
chain[5] set voltage to 860
chain[6] set voltage to 860
chain[7] set voltage to 860
chain[5] set voltage to 850
chain[6] set voltage to 850
chain[7] set voltage to 850
chain[5] set voltage to 840
chain[6] set voltage to 840
chain[5] set voltage to 830
chain[6] set voltage to 830
start thread for read temp
setStartTimePoint total_tv_start_sys=2063 total_tv_end_sys=2064
restartNum = 2 , auto-reinit enabled...
mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9i/196500"]}
bring_up_pcb_temp = 33
avg hash rate = 3747.500450, ideal hash rate = 11000
hash rate is low...
re_open_core enter
Before read Chain[J6] org chain_voltage_pic=193]
After read Chain[J6] new chain_voltage_pic=193 read pic=193
Chain[J6] original vol value=830 adjusted vol value:840
Chain[J6] [org chain_voltage_pic=193 value=830] [new chain_voltage_pic=176 value=840]
Chain[J6] Aisc[00] original freq=525 adjusted freq:525
Chain[J6] Aisc[01] original freq=525 adjusted freq:525
Chain[J6] Aisc[02] original freq=525 adjusted freq:525
Chain[J6] Aisc[03] original freq=525 adjusted freq:525
Chain[J6] Aisc[04] original freq=525 adjusted freq:525
Chain[J6] Aisc[05] original freq=525 adjusted freq:525
Chain[J6] Aisc[06] original freq=525 adjusted freq:525
Chain[J6] Aisc[07] original freq=525 adjusted freq:525
Chain[J6] Aisc[08] original freq=525 adjusted freq:525
Chain[J6] Aisc[09] original freq=525 adjusted freq:525
Chain[J6] Aisc[10] original freq=525 adjusted freq:525
Chain[J6] Aisc[11] original freq=525 adjusted freq:525
Chain[J6] Aisc[12] original freq=525 adjusted freq:525
Chain[J6] Aisc[13] original freq=525 adjusted freq:525
Chain[J6] Aisc[14] original freq=525 adjusted freq:525
Chain[J6] Aisc[15] original freq=525 adjusted freq:525
Chain[J6] Aisc[16] original freq=525 adjusted freq:525
Chain[J6] Aisc[17] original freq=525 adjusted freq:525
Chain[J6] Aisc[18] original freq=525 adjusted freq:525
Chain[J6] Aisc[19] original freq=525 adjusted freq:525
Chain[J6] Aisc[20] original freq=525 adjusted freq:525
Chain[J6] Aisc[21] original freq=525 adjusted freq:525
Chain[J6] Aisc[22] original freq=525 adjusted freq:525
Chain[J6] Aisc[23] original freq=525 adjusted freq:525
Chain[J6] Aisc[24] original freq=525 adjusted freq:525
Chain[J6] Aisc[25] original freq=525 adjusted freq:525
Chain[J6] Aisc[26] original freq=525 adjusted freq:525
Chain[J6] Aisc[27] original freq=525 adjusted freq:525
Chain[J6] Aisc[28] original freq=525 adjusted freq:525
Chain[J6] Aisc[29] original freq=525 adjusted freq:525
Chain[J6] Aisc[30] original freq=525 adjusted freq:525
Chain[J6] Aisc[31] original freq=525 adjusted freq:525
Chain[J6] Aisc[32] original freq=525 adjusted freq:525
Chain[J6] Aisc[33] original freq=525 adjusted freq:525
Chain[J6] Aisc[34] original freq=525 adjusted freq:525
Chain[J6] Aisc[35] original freq=525 adjusted freq:525
Chain[J6] Aisc[36] original freq=525 adjusted freq:525
Chain[J6] Aisc[37] original freq=525 adjusted freq:525
Chain[J6] Aisc[38] original freq=525 adjusted freq:525
Chain[J6] Aisc[39] original freq=525 adjusted freq:525
Chain[J6] Aisc[40] original freq=525 adjusted freq:525
Chain[J6] Aisc[41] original freq=525 adjusted freq:525
Chain[J6] Aisc[42] original freq=525 adjusted freq:525
Chain[J6] Aisc[43] original freq=525 adjusted freq:525
Chain[J6] Aisc[44] original freq=525 adjusted freq:525
Chain[J6] Aisc[45] original freq=525 adjusted freq:525
Chain[J6] Aisc[46] original freq=525 adjusted freq:525
Chain[J6] Aisc[47] original freq=525 adjusted freq:525
Chain[J6] Aisc[48] original freq=525 adjusted freq:525
Chain[J6] Aisc[49] original freq=525 adjusted freq:525
Chain[J6] Aisc[50] original freq=525 adjusted freq:525
Chain[J6] Aisc[51] original freq=525 adjusted freq:525
Chain[J6] Aisc[52] original freq=525 adjusted freq:525
Chain[J6] Aisc[53] original freq=525 adjusted freq:525
Chain[J6] Aisc[54] original freq=525 adjusted freq:525
Chain[J6] Aisc[55] original freq=525 adjusted freq:525
Chain[J6] Aisc[56] original freq=525 adjusted freq:525
Chain[J6] Aisc[57] original freq=525 adjusted freq:525
Chain[J6] Aisc[58] original freq=525 adjusted freq:525
Chain[J6] Aisc[59] original freq=525 adjusted freq:525
Chain[J6] Aisc[60] original freq=525 adjusted freq:525
Chain[J6] Aisc[61] original freq=525 adjusted freq:525
Chain[J6] Aisc[62] original freq=525 adjusted freq:525
Before read Chain[J7] org chain_voltage_pic=193]
After read Chain[J7] new chain_voltage_pic=193 read pic=193
Chain[J7] original vol value=830 adjusted vol value:840
Chain[J7] [org chain_voltage_pic=193 value=830] [new chain_voltage_pic=176 value=840]
Chain[J7] Aisc[00] original freq=525 adjusted freq:525
Chain[J7] Aisc[01] original freq=525 adjusted freq:525
Chain[J7] Aisc[02] original freq=525 adjusted freq:525
Chain[J7] Aisc[03] original freq=525 adjusted freq:525
Chain[J7] Aisc[04] original freq=525 adjusted freq:525
Chain[J7] Aisc[05] original freq=525 adjusted freq:525
Chain[J7] Aisc[06] original freq=525 adjusted freq:525
Chain[J7] Aisc[07] original freq=525 adjusted freq:525
Chain[J7] Aisc[08] original freq=525 adjusted freq:525
Chain[J7] Aisc[09] original freq=525 adjusted freq:525
Chain[J7] Aisc[10] original freq=525 adjusted freq:525
Chain[J7] Aisc[11] original freq=525 adjusted freq:525
Chain[J7] Aisc[12] original freq=525 adjusted freq:525
Chain[J7] Aisc[13] original freq=525 adjusted freq:525
Chain[J7] Aisc[14] original freq=525 adjusted freq:525
Chain[J7] Aisc[15] original freq=525 adjusted freq:525
Chain[J7] Aisc[16] original freq=525 adjusted freq:525
Chain[J7] Aisc[17] original freq=525 adjusted freq:525
Chain[J7] Aisc[18] original freq=525 adjusted freq:525
Chain[J7] Aisc[19] original freq=525 adjusted freq:525
Chain[J7] Aisc[20] original freq=525 adjusted freq:525
Chain[J7] Aisc[21] original freq=525 adjusted freq:525
Chain[J7] Aisc[22] original freq=525 adjusted freq:525
Chain[J7] Aisc[23] original freq=525 adjusted freq:525
Chain[J7] Aisc[24] original freq=525 adjusted freq:525
Chain[J7] Aisc[25] original freq=525 adjusted freq:525
Chain[J7] Aisc[26] original freq=525 adjusted freq:525
Chain[J7] Aisc[27] original freq=525 adjusted freq:525
Chain[J7] Aisc[28] original freq=525 adjusted freq:525
Chain[J7] Aisc[29] original freq=525 adjusted freq:525
Chain[J7] Aisc[30] original freq=525 adjusted freq:525
Chain[J7] Aisc[31] original freq=525 adjusted freq:525
Chain[J7] Aisc[32] original freq=525 adjusted freq:525
Chain[J7] Aisc[33] original freq=525 adjusted freq:525
Chain[J7] Aisc[34] original freq=525 adjusted freq:525
Chain[J7] Aisc[35] original freq=525 adjusted freq:525
Chain[J7] Aisc[36] original freq=525 adjusted freq:525
Chain[J7] Aisc[37] original freq=525 adjusted freq:525
Chain[J7] Aisc[38] original freq=525 adjusted freq:525
Chain[J7] Aisc[39] original freq=525 adjusted freq:525
Chain[J7] Aisc[40] original freq=525 adjusted freq:525
Chain[J7] Aisc[41] original freq=525 adjusted freq:525
Chain[J7] Aisc[42] original freq=525 adjusted freq:525
Chain[J7] Aisc[43] original freq=525 adjusted freq:525
Chain[J7] Aisc[44] original freq=525 adjusted freq:525
Chain[J7] Aisc[45] original freq=525 adjusted freq:525
Chain[J7] Aisc[46] original freq=525 adjusted freq:525
Chain[J7] Aisc[47] original freq=525 adjusted freq:525
Chain[J7] Aisc[48] original freq=525 adjusted freq:525
Chain[J7] Aisc[49] original freq=525 adjusted freq:525
Chain[J7] Aisc[50] original freq=525 adjusted freq:525
Chain[J7] Aisc[51] original freq=525 adjusted freq:525
Chain[J7] Aisc[52] original freq=525 adjusted freq:525
Chain[J7] Aisc[53] original freq=525 adjusted freq:525
Chain[J7] Aisc[54] original freq=525 adjusted freq:525
Chain[J7] Aisc[55] original freq=525 adjusted freq:525
Chain[J7] Aisc[56] original freq=525 adjusted freq:525
Chain[J7] Aisc[57] original freq=525 adjusted freq:525
Chain[J7] Aisc[58] original freq=525 adjusted freq:525
Chain[J7] Aisc[59] original freq=525 adjusted freq:525
Chain[J7] Aisc[60] original freq=525 adjusted freq:525
Chain[J7] Aisc[61] original freq=525 adjusted freq:525
Chain[J7] Aisc[62] original freq=525 adjusted freq:525
Before read Chain[J8] org chain_voltage_pic=159]
After read Chain[J8] new chain_voltage_pic=159 read pic=159
Chain[J8] original vol value=850 adjusted vol value:860
Chain[J8] [org chain_voltage_pic=159 value=850] [new chain_voltage_pic=142 value=860]
Chain[J8] Aisc[00] original freq=504 adjusted freq:504
Chain[J8] Aisc[01] original freq=504 adjusted freq:504
Chain[J8] Aisc[02] original freq=504 adjusted freq:504
Chain[J8] Aisc[03] original freq=504 adjusted freq:504
Chain[J8] Aisc[04] original freq=504 adjusted freq:504
Chain[J8] Aisc[05] original freq=504 adjusted freq:504
Chain[J8] Aisc[06] original freq=504 adjusted freq:504
Chain[J8] Aisc[07] original freq=504 adjusted freq:504
Chain[J8] Aisc[08] original freq=504 adjusted freq:504
Chain[J8] Aisc[09] original freq=504 adjusted freq:504
Chain[J8] Aisc[10] original freq=504 adjusted freq:504
Chain[J8] Aisc[11] original freq=504 adjusted freq:504
Chain[J8] Aisc[12] original freq=504 adjusted freq:504
Chain[J8] Aisc[13] original freq=504 adjusted freq:504
Chain[J8] Aisc[14] original freq=504 adjusted freq:504
Chain[J8] Aisc[15] original freq=504 adjusted freq:504
Chain[J8] Aisc[16] original freq=504 adjusted freq:504
Chain[J8] Aisc[17] original freq=504 adjusted freq:504
Chain[J8] Aisc[18] original freq=504 adjusted freq:504
Chain[J8] Aisc[19] original freq=504 adjusted freq:504
Chain[J8] Aisc[20] original freq=504 adjusted freq:504
Chain[J8] Aisc[21] original freq=504 adjusted freq:504
Chain[J8] Aisc[22] original freq=504 adjusted freq:504
Chain[J8] Aisc[23] original freq=504 adjusted freq:504
Chain[J8] Aisc[24] original freq=504 adjusted freq:504
Chain[J8] Aisc[25] original freq=504 adjusted freq:504
Chain[J8] Aisc[26] original freq=504 adjusted freq:504
Chain[J8] Aisc[27] original freq=504 adjusted freq:504
Chain[J8] Aisc[28] original freq=504 adjusted freq:504
Chain[J8] Aisc[29] original freq=504 adjusted freq:504
Chain[J8] Aisc[30] original freq=504 adjusted freq:504
Chain[J8] Aisc[31] original freq=504 adjusted freq:504
Chain[J8] Aisc[32] original freq=504 adjusted freq:504
Chain[J8] Aisc[33] original freq=504 adjusted freq:504
Chain[J8] Aisc[34] original freq=504 adjusted freq:504
Chain[J8] Aisc[35] original freq=504 adjusted freq:504
Chain[J8] Aisc[36] original freq=504 adjusted freq:504
Chain[J8] Aisc[37] original freq=504 adjusted freq:504
Chain[J8] Aisc[38] original freq=504 adjusted freq:504
Chain[J8] Aisc[39] original freq=504 adjusted freq:504
Chain[J8] Aisc[40] original freq=504 adjusted freq:504
Chain[J8] Aisc[41] original freq=504 adjusted freq:504
Chain[J8] Aisc[42] original freq=504 adjusted freq:504
Chain[J8] Aisc[43] original freq=504 adjusted freq:504
Chain[J8] Aisc[44] original freq=504 adjusted freq:504
Chain[J8] Aisc[45] original freq=504 adjusted freq:504
Chain[J8] Aisc[46] original freq=504 adjusted freq:504
Chain[J8] Aisc[47] original freq=504 adjusted freq:504
Chain[J8] Aisc[48] original freq=504 adjusted freq:504
Chain[J8] Aisc[49] original freq=504 adjusted freq:504
Chain[J8] Aisc[50] original freq=504 adjusted freq:504
Chain[J8] Aisc[51] original freq=504 adjusted freq:504
Chain[J8] Aisc[52] original freq=504 adjusted freq:504
Chain[J8] Aisc[53] original freq=504 adjusted freq:504
Chain[J8] Aisc[54] original freq=504 adjusted freq:504
Chain[J8] Aisc[55] original freq=504 adjusted freq:504
Chain[J8] Aisc[56] original freq=504 adjusted freq:504
Chain[J8] Aisc[57] original freq=504 adjusted freq:504
Chain[J8] Aisc[58] original freq=504 adjusted freq:504
Chain[J8] Aisc[59] original freq=504 adjusted freq:504
Chain[J8] Aisc[60] original freq=504 adjusted freq:504
Chain[J8] Aisc[61] original freq=504 adjusted freq:504
Chain[J8] Aisc[62] original freq=504 adjusted freq:504
Chain[J6] has 63 asic
Chain[J7] has 19 asic
i = 6, retry_count = 0, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 1, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 2, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 3, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 4, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 5, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 6, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 7, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 8, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 9, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 10, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 11, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 12, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 13, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 14, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 15, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 16, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 17, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 18, dev->chain_asic_num[i] = 19
retry Chain[J7] has 30 asic
i = 6, retry_count = 19, dev->chain_asic_num[i] = 30
retry Chain[J7] has 19 asic
Chain[J8] has 35 asic
i = 7, retry_count = 0, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 1, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 2, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 3, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 4, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 5, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 6, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 7, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 8, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 9, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 10, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 11, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 12, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 13, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 14, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 15, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 16, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 17, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 18, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
i = 7, retry_count = 19, dev->chain_asic_num[i] = 35
retry Chain[J8] has 35 asic
Chain[J6] has core num in PIC
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
Chain[J8] ASIC[26] has core num=2
Chain[J8] ASIC[43] has core num=1
Chain[J8] ASIC[44] has core num=1
miner total rate=11158GH/s ideal_total_hash_rate = 11000GH/s
read PIC voltage=910 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=650
Asic[ 0]:525 Asic[ 1]:525 Asic[ 2]:525 Asic[ 3]:525 Asic[ 4]:525 Asic[ 5]:525 Asic[ 6]:525 Asic[ 7]:525
Asic[ 8]:525 Asic[ 9]:525 Asic[10]:525 Asic[11]:525 Asic[12]:525 Asic[13]:525 Asic[14]:525 Asic[15]:525
Asic[16]:525 Asic[17]:525 Asic[18]:525 Asic[19]:525 Asic[20]:525 Asic[21]:525 Asic[22]:525 Asic[23]:525
Asic[24]:525 Asic[25]:525 Asic[26]:525 Asic[27]:525 Asic[28]:525 Asic[29]:525 Asic[30]:525 Asic[31]:525
Asic[32]:525 Asic[33]:525 Asic[34]:525 Asic[35]:525 Asic[36]:525 Asic[37]:525 Asic[38]:525 Asic[39]:525
Asic[40]:525 Asic[41]:525 Asic[42]:525 Asic[43]:525 Asic[44]:525 Asic[45]:525 Asic[46]:525 Asic[47]:525
Asic[48]:525 Asic[49]:525 Asic[50]:525 Asic[51]:525 Asic[52]:525 Asic[53]:525 Asic[54]:525 Asic[55]:525
Asic[56]:525 Asic[57]:525 Asic[58]:525 Asic[59]:525 Asic[60]:525 Asic[61]:525 Asic[62]:525
Chain:5 max freq=525
Chain:5 min freq=525
read PIC voltage=910 on chain[6]
Chain:6 chipnum=19
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=650
Asic[ 0]:525 Asic[ 1]:525 Asic[ 2]:525 Asic[ 3]:525 Asic[ 4]:525 Asic[ 5]:525 Asic[ 6]:525 Asic[ 7]:525
Asic[ 8]:525 Asic[ 9]:525 Asic[10]:525 Asic[11]:525 Asic[12]:525 Asic[13]:525 Asic[14]:525 Asic[15]:525
Asic[16]:525 Asic[17]:525 Asic[18]:525
Chain:6 max freq=525
Chain:6 min freq=525
read PIC voltage=910 on chain[7]
Chain:7 chipnum=35
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:504 Asic[ 1]:504 Asic[ 2]:504 Asic[ 3]:504 Asic[ 4]:504 Asic[ 5]:504 Asic[ 6]:504 Asic[ 7]:504
Asic[ 8]:504 Asic[ 9]:504 Asic[10]:504 Asic[11]:504 Asic[12]:504 Asic[13]:504 Asic[14]:504 Asic[15]:504
Asic[16]:504 Asic[17]:504 Asic[18]:504 Asic[19]:504 Asic[20]:504 Asic[21]:504 Asic[22]:504 Asic[23]:504
Asic[24]:504 Asic[25]:504 Asic[26]:504 Asic[27]:504 Asic[28]:504 Asic[29]:504 Asic[30]:504 Asic[31]:504
Asic[32]:504 Asic[33]:504 Asic[34]:504
Chain:7 max freq=504
Chain:7 min freq=504
Miner fix freq ...
totalRate = 11158, fixed_totalRate = 11110
read PIC voltage=910 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=650
Asic[ 0]:525 Asic[ 1]:525 Asic[ 2]:525 Asic[ 3]:525 Asic[ 4]:525 Asic[ 5]:525 Asic[ 6]:525 Asic[ 7]:525
Asic[ 8]:525 Asic[ 9]:525 Asic[10]:525 Asic[11]:525 Asic[12]:525 Asic[13]:525 Asic[14]:525 Asic[15]:525
Asic[16]:525 Asic[17]:525 Asic[18]:525 Asic[19]:525 Asic[20]:525 Asic[21]:525 Asic[22]:525 Asic[23]:525
Asic[24]:525 Asic[25]:525 Asic[26]:525 Asic[27]:525 Asic[28]:525 Asic[29]:525 Asic[30]:525 Asic[31]:525
Asic[32]:525 Asic[33]:525 Asic[34]:525 Asic[35]:525 Asic[36]:525 Asic[37]:525 Asic[38]:525 Asic[39]:525
Asic[40]:525 Asic[41]:525 Asic[42]:525 Asic[43]:525 Asic[44]:525 Asic[45]:525 Asic[46]:525 Asic[47]:525
Asic[48]:525 Asic[49]:525 Asic[50]:525 Asic[51]:525 Asic[52]:525 Asic[53]:525 Asic[54]:525 Asic[55]:525
Asic[56]:525 Asic[57]:525 Asic[58]:525 Asic[59]:525 Asic[60]:525 Asic[61]:525 Asic[62]:525
Chain:5 max freq=525
Chain:5 min freq=525
read PIC voltage=910 on chain[6]
Chain:6 chipnum=19
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=650
Asic[ 0]:525 Asic[ 1]:525 Asic[ 2]:525 Asic[ 3]:525 Asic[ 4]:525 Asic[ 5]:525 Asic[ 6]:525 Asic[ 7]:525
Asic[ 8]:525 Asic[ 9]:525 Asic[10]:525 Asic[11]:525 Asic[12]:525 Asic[13]:525 Asic[14]:525 Asic[15]:525
Asic[16]:525 Asic[17]:525 Asic[18]:525
Chain:6 max freq=525
Chain:6 min freq=525
read PIC voltage=910 on chain[7]
Chain:7 chipnum=35
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:504 Asic[ 1]:504 Asic[ 2]:504 Asic[ 3]:504 Asic[ 4]:504 Asic[ 5]:504 Asic[ 6]:504 Asic[ 7]:504
Asic[ 8]:504 Asic[ 9]:504 Asic[10]:504 Asic[11]:504 Asic[12]:504 Asic[13]:504 Asic[14]:504 Asic[15]:504
Asic[16]:504 Asic[17]:504 Asic[18]:504 Asic[19]:504 Asic[20]:504 Asic[21]:504 Asic[22]:504 Asic[23]:504
Asic[24]:504 Asic[25]:504 Asic[26]:504 Asic[27]:504 Asic[28]:504 Asic[29]:504 Asic[30]:504 Asic[31]:504
Asic[32]:504 Asic[33]:504 Asic[34]:504
Chain:7 max freq=504
Chain:7 min freq=504
max freq = 525
totalRate = 11158, fixed_totalRate = 11000
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:20 remote:22 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
reopen core end
re-open core 1 times
checking hash again
avg hash rate = 0.000000, ideal hash rate = 11000
re_open_core_times: 1
re_open_core enter
Before read Chain[J6] org chain_voltage_pic=176]
After read Chain[J6] new chain_voltage_pic=74 read pic=74
Chain[J6] original vol value=840 adjusted vol value:840
Chain[J6] [org chain_voltage_pic=74 value=900] [new chain_voltage_pic=176 value=840]
Chain[J6] Aisc[00] original freq=525 adjusted freq:512
Chain[J6] Aisc[01] original freq=525 adjusted freq:512
Chain[J6] Aisc[02] original freq=525 adjusted freq:512
Chain[J6] Aisc[03] original freq=525 adjusted freq:512
Chain[J6] Aisc[04] original freq=525 adjusted freq:512
Chain[J6] Aisc[05] original freq=525 adjusted freq:512
Chain[J6] Aisc[06] original freq=525 adjusted freq:512
Chain[J6] Aisc[07] original freq=525 adjusted freq:512
Chain[J6] Aisc[08] original freq=525 adjusted freq:512
Chain[J6] Aisc[09] original freq=525 adjusted freq:512
Chain[J6] Aisc[10] original freq=525 adjusted freq:512
Chain[J6] Aisc[11] original freq=525 adjusted freq:512
Chain[J6] Aisc[12] original freq=525 adjusted freq:512
Chain[J6] Aisc[13] original freq=525 adjusted freq:512
Chain[J6] Aisc[14] original freq=525 adjusted freq:512
Chain[J6] Aisc[15] original freq=525 adjusted freq:512
Chain[J6] Aisc[16] original freq=525 adjusted freq:512
Chain[J6] Aisc[17] original freq=525 adjusted freq:512
Chain[J6] Aisc[18] original freq=525 adjusted freq:512
Chain[J6] Aisc[19] original freq=525 adjusted freq:512
Chain[J6] Aisc[20] original freq=525 adjusted freq:512
Chain[J6] Aisc[21] original freq=525 adjusted freq:512
Chain[J6] Aisc[22] original freq=525 adjusted freq:512
Chain[J6] Aisc[23] original freq=525 adjusted freq:512
Chain[J6] Aisc[24] original freq=525 adjusted freq:512
Chain[J6] Aisc[25] original freq=525 adjusted freq:512
Chain[J6] Aisc[26] original freq=525 adjusted freq:512
Chain[J6] Aisc[27] original freq=525 adjusted freq:512
Chain[J6] Aisc[28] original freq=525 adjusted freq:512
Chain[J6] Aisc[29] original freq=525 adjusted freq:512
Chain[J6] Aisc[30] original freq=525 adjusted freq:512
Chain[J6] Aisc[31] original freq=525 adjusted freq:512
Chain[J6] Aisc[32] original freq=525 adjusted freq:512
Chain[J6] Aisc[33] original freq=525 adjusted freq:512
Chain[J6] Aisc[34] original freq=525 adjusted freq:512
Chain[J6] Aisc[35] original freq=525 adjusted freq:512
Chain[J6] Aisc[36] original freq=525 adjusted freq:512
Chain[J6] Aisc[37] original freq=525 adjusted freq:512
Chain[J6] Aisc[38] original freq=525 adjusted freq:512
Chain[J6] Aisc[39] original freq=525 adjusted freq:512
Chain[J6] Aisc[40] original freq=525 adjusted freq:512
Chain[J6] Aisc[41] original freq=525 adjusted freq:512
Chain[J6] Aisc[42] original freq=525 adjusted freq:512
Chain[J6] Aisc[43] original freq=525 adjusted freq:512
Chain[J6] Aisc[44] original freq=525 adjusted freq:512
Chain[J6] Aisc[45] original freq=525 adjusted freq:512
Chain[J6] Aisc[46] original freq=525 adjusted freq:512
Chain[J6] Aisc[47] original freq=525 adjusted freq:512
Chain[J6] Aisc[48] original freq=525 adjusted freq:512
Chain[J6] Aisc[49] original freq=525 adjusted freq:512
Chain[J6] Aisc[50] original freq=525 adjusted freq:512
Chain[J6] Aisc[51] original freq=525 adjusted freq:512
Chain[J6] Aisc[52] original freq=525 adjusted freq:512
Chain[J6] Aisc[53] original freq=525 adjusted freq:512
Chain[J6] Aisc[54] original freq=525 adjusted freq:512
Chain[J6] Aisc[55] original freq=525 adjusted freq:512
Chain[J6] Aisc[56] original freq=525 adjusted freq:512
Chain[J6] Aisc[57] original freq=525 adjusted freq:512
Chain[J6] Aisc[58] original freq=525 adjusted freq:512
Chain[J6] Aisc[59] original freq=525 adjusted freq:512
Chain[J6] Aisc[60] original freq=525 adjusted freq:512
Chain[J6] Aisc[61] original freq=525 adjusted freq:512
Chain[J6] Aisc[62] original freq=525 adjusted freq:512
Before read Chain[J7] org chain_voltage_pic=176]
After read Chain[J7] new chain_voltage_pic=74 read pic=74
Chain[J7] original vol value=840 adjusted vol value:840
Chain[J7] [org chain_voltage_pic=74 value=900] [new chain_voltage_pic=176 value=840]
Chain[J7] Aisc[00] original freq=525 adjusted freq:512
Chain[J7] Aisc[01] original freq=525 adjusted freq:512
Chain[J7] Aisc[02] original freq=525 adjusted freq:512
Chain[J7] Aisc[03] original freq=525 adjusted freq:512
Chain[J7] Aisc[04] original freq=525 adjusted freq:512
Chain[J7] Aisc[05] original freq=525 adjusted freq:512
Chain[J7] Aisc[06] original freq=525 adjusted freq:512
Chain[J7] Aisc[07] original freq=525 adjusted freq:512
Chain[J7] Aisc[08] original freq=525 adjusted freq:512
Chain[J7] Aisc[09] original freq=525 adjusted freq:512
Chain[J7] Aisc[10] original freq=525 adjusted freq:512
Chain[J7] Aisc[11] original freq=525 adjusted freq:512
Chain[J7] Aisc[12] original freq=525 adjusted freq:512
Chain[J7] Aisc[13] original freq=525 adjusted freq:512
Chain[J7] Aisc[14] original freq=525 adjusted freq:512
Chain[J7] Aisc[15] original freq=525 adjusted freq:512
Chain[J7] Aisc[16] original freq=525 adjusted freq:512
Chain[J7] Aisc[17] original freq=525 adjusted freq:512
Chain[J7] Aisc[18] original freq=525 adjusted freq:512
Chain[J7] Aisc[19] original freq=525 adjusted freq:512
Chain[J7] Aisc[20] original freq=525 adjusted freq:512
Chain[J7] Aisc[21] original freq=525 adjusted freq:512
Chain[J7] Aisc[22] original freq=525 adjusted freq:512
Chain[J7] Aisc[23] original freq=525 adjusted freq:512
Chain[J7] Aisc[24] original freq=525 adjusted freq:512
Chain[J7] Aisc[25] original freq=525 adjusted freq:512
Chain[J7] Aisc[26] original freq=525 adjusted freq:512
Chain[J7] Aisc[27] original freq=525 adjusted freq:512
Chain[J7] Aisc[28] original freq=525 adjusted freq:512
Chain[J7] Aisc[29] original freq=525 adjusted freq:512
Chain[J7] Aisc[30] original freq=525 adjusted freq:512
Chain[J7] Aisc[31] original freq=525 adjusted freq:512
Chain[J7] Aisc[32] original freq=525 adjusted freq:512
Chain[J7] Aisc[33] original freq=525 adjusted freq:512
Chain[J7] Aisc[34] original freq=525 adjusted freq:512
Chain[J7] Aisc[35] original freq=525 adjusted freq:512
Chain[J7] Aisc[36] original freq=525 adjusted freq:512
Chain[J7] Aisc[37] original freq=525 adjusted freq:512
Chain[J7] Aisc[38] original freq=525 adjusted freq:512
Chain[J7] Aisc[39] original freq=525 adjusted freq:512
Chain[J7] Aisc[40] original freq=525 adjusted freq:512
Chain[J7] Aisc[41] original freq=525 adjusted freq:512
Chain[J7] Aisc[42] original freq=525 adjusted freq:512
Chain[J7] Aisc[43] original freq=525 adjusted freq:512
Chain[J7] Aisc[44] original freq=525 adjusted freq:512
Chain[J7] Aisc[45] original freq=525 adjusted freq:512
Chain[J7] Aisc[46] original freq=525 adjusted freq:512
Chain[J7] Aisc[47] original freq=525 adjusted freq:512
Chain[J7] Aisc[48] original freq=525 adjusted freq:512
Chain[J7] Aisc[49] original freq=525 adjusted freq:512
Chain[J7] Aisc[50] original freq=525 adjusted freq:512
Chain[J7] Aisc[51] original freq=525 adjusted freq:512
Chain[J7] Aisc[52] original freq=525 adjusted freq:512
Chain[J7] Aisc[53] original freq=525 adjusted freq:512
Chain[J7] Aisc[54] original freq=525 adjusted freq:512
Chain[J7] Aisc[55] original freq=525 adjusted freq:512
Chain[J7] Aisc[56] original freq=525 adjusted freq:512
Chain[J7] Aisc[57] original freq=525 adjusted freq:512
Chain[J7] Aisc[58] original freq=525 adjusted freq:512
Chain[J7] Aisc[59] original freq=525 adjusted freq:512
Chain[J7] Aisc[60] original freq=525 adjusted freq:512
Chain[J7] Aisc[61] original freq=525 adjusted freq:512
Chain[J7] Aisc[62] original freq=525 adjusted freq:512
Before read Chain[J8] org chain_voltage_pic=142]
After read Chain[J8] new chain_voltage_pic=74 read pic=74
Chain[J8] original vol value=860 adjusted vol value:860
Chain[J8] [org chain_voltage_pic=74 value=900] [new chain_voltage_pic=142 value=860]
Chain[J8] Aisc[00] original freq=504 adjusted freq:493
Chain[J8] Aisc[01] original freq=504 adjusted freq:493
Chain[J8] Aisc[02] original freq=504 adjusted freq:493
Chain[J8] Aisc[03] original freq=504 adjusted freq:493
Chain[J8] Aisc[04] original freq=504 adjusted freq:493
Chain[J8] Aisc[05] original freq=504 adjusted freq:493
Chain[J8] Aisc[06] original freq=504 adjusted freq:493
Chain[J8] Aisc[07] original freq=504 adjusted freq:493
Chain[J8] Aisc[08] original freq=504 adjusted freq:493
Chain[J8] Aisc[09] original freq=504 adjusted freq:493
Chain[J8] Aisc[10] original freq=504 adjusted freq:493
Chain[J8] Aisc[11] original freq=504 adjusted freq:493
Chain[J8] Aisc[12] original freq=504 adjusted freq:493
Chain[J8] Aisc[13] original freq=504 adjusted freq:493
Chain[J8] Aisc[14] original freq=504 adjusted freq:493
Chain[J8] Aisc[15] original freq=504 adjusted freq:493
Chain[J8] Aisc[16] original freq=504 adjusted freq:493
Chain[J8] Aisc[17] original freq=504 adjusted freq:493
Chain[J8] Aisc[18] original freq=504 adjusted freq:493
Chain[J8] Aisc[19] original freq=504 adjusted freq:493
Chain[J8] Aisc[20] original freq=504 adjusted freq:493
Chain[J8] Aisc[21] original freq=504 adjusted freq:493
Chain[J8] Aisc[22] original freq=504 adjusted freq:493
Chain[J8] Aisc[23] original freq=504 adjusted freq:493
Chain[J8] Aisc[24] original freq=504 adjusted freq:493
Chain[J8] Aisc[25] original freq=504 adjusted freq:493
Chain[J8] Aisc[26] original freq=504 adjusted freq:493
Chain[J8] Aisc[27] original freq=504 adjusted freq:493
Chain[J8] Aisc[28] original freq=504 adjusted freq:493
Chain[J8] Aisc[29] original freq=504 adjusted freq:493
Chain[J8] Aisc[30] original freq=504 adjusted freq:493
Chain[J8] Aisc[31] original freq=504 adjusted freq:493
Chain[J8] Aisc[32] original freq=504 adjusted freq:493
Chain[J8] Aisc[33] original freq=504 adjusted freq:493
Chain[J8] Aisc[34] original freq=504 adjusted freq:493
Chain[J8] Aisc[35] original freq=504 adjusted freq:493
Chain[J8] Aisc[36] original freq=504 adjusted freq:493
Chain[J8] Aisc[37] original freq=504 adjusted freq:493
Chain[J8] Aisc[38] original freq=504 adjusted freq:493
Chain[J8] Aisc[39] original freq=504 adjusted freq:493
Chain[J8] Aisc[40] original freq=504 adjusted freq:493
Chain[J8] Aisc[41] original freq=504 adjusted freq:493
Chain[J8] Aisc[42] original freq=504 adjusted freq:493
Chain[J8] Aisc[43] original freq=504 adjusted freq:493
Chain[J8] Aisc[44] original freq=504 adjusted freq:493
Chain[J8] Aisc[45] original freq=504 adjusted freq:493
Chain[J8] Aisc[46] original freq=504 adjusted freq:493
Chain[J8] Aisc[47] original freq=504 adjusted freq:493
Chain[J8] Aisc[48] original freq=504 adjusted freq:493
Chain[J8] Aisc[49] original freq=504 adjusted freq:493
Chain[J8] Aisc[50] original freq=504 adjusted freq:493
Chain[J8] Aisc[51] original freq=504 adjusted freq:493
Chain[J8] Aisc[52] original freq=504 adjusted freq:493
Chain[J8] Aisc[53] original freq=504 adjusted freq:493
Chain[J8] Aisc[54] original freq=504 adjusted freq:493
Chain[J8] Aisc[55] original freq=504 adjusted freq:493
Chain[J8] Aisc[56] original freq=504 adjusted freq:493
Chain[J8] Aisc[57] original freq=504 adjusted freq:493
Chain[J8] Aisc[58] original freq=504 adjusted freq:493
Chain[J8] Aisc[59] original freq=504 adjusted freq:493
Chain[J8] Aisc[60] original freq=504 adjusted freq:493
Chain[J8] Aisc[61] original freq=504 adjusted freq:493
Chain[J8] Aisc[62] original freq=504 adjusted freq:493
Chain[J6] has 63 asic
Chain[J7] has 19 asic
i = 6, retry_count = 0, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 1, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 2, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 3, dev->chain_asic_num[i] = 19
retry Chain[J7] has 20 asic
i = 6, retry_count = 4, dev->chain_asic_num[i] = 20
retry Chain[J7] has 19 asic
i = 6, retry_count = 5, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 6, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 7, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 8, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 9, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 10, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 11, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 12, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 13, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 14, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 15, dev->chain_asic_num[i] = 19
retry Chain[J7] has 19 asic
i = 6, retry_count = 16, dev->chain_asic_num[i] = 19
do read_temp_func once...
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=59.0550 Asic[02]=59.9780 Asic[03]=57.6960 Asic[04]=61.0180 Asic[05]=53.6030 Asic[06]=58.1490 Asic[07]=61.9410 Asic[08]=56.6560
Asic[09]=64.1890 Asic[10]=55.9520 Asic[11]=57.3610 Asic[12]=58.9380 Asic[13]=59.2230 Asic[14]=57.8810 Asic[15]=58.9710 Asic[16]=59.2900
Asic[17]=60.1960 Asic[18]=56.7570 Asic[19]=57.1430 Asic[20]=58.2000 Asic[21]=57.5790 Asic[22]=61.3370 Asic[23]=60.7330 Asic[24]=58.8040
Asic[25]=61.7060 Asic[26]=54.3580 Asic[27]=59.8100 Asic[28]=60.2460 Asic[29]=54.5930 Asic[30]=63.2160 Asic[31]=62.5790 Asic[32]=53.9380
Asic[33]=64.4240 Asic[34]=61.7230 Asic[35]=63.5180 Asic[36]=57.2600 Asic[37]=57.8140 Asic[38]=60.3300 Asic[39]=58.9880 Asic[40]=57.3780
Asic[41]=63.0480 Asic[42]=61.6560 Asic[43]=58.6190 Asic[44]=65.9680 Asic[45]=59.8270 Asic[46]=58.1160 Asic[47]=62.6460 Asic[48]=58.5520
Asic[49]=56.6560 Asic[50]=57.2940 Asic[51]=58.6020 Asic[52]=56.4550 Asic[53]=56.6060 Asic[54]=58.9210 Asic[55]=62.3100 Asic[56]=54.6600
Asic[57]=59.6090 Asic[58]=60.2630 Asic[59]=59.0050 Asic[60]=52.7640 Asic[61]=59.6590 Asic[62]=58.7030 Asic[63]=57.7800
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=1.24100
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=436.207 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=687.865 Asic[16]=1.86200
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=671.088 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=369.098 Asic[12]=167.772 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=1.09000 Asic[16]=0.00000
Asic[17]=1.15700 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=637.534 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=251.658 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[12]=436.207000
Asic[15]=687.865000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[07]=671.088000
Asic[11]=369.098000
Asic[12]=167.772000
Asic[25]=637.534000
Asic[30]=251.658000
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=49
Chain[5] Chip[62] junction temperature=57
Special fix Chain[5] Chip[62] middle Temp = 64
Done read temp on Chain[5]
Done read temp on Chain[6]
Done read temp on Chain[7]
Max pcb temp : 49
set FAN speed according to: temp_highest=49 temp_top1[PWM_T]=49 temp_top1[TEMP_POS_LOCAL]=49 temp_change=-1 fix_fan_steps=0
FAN PWM: 50
read_temp_func Done!
CRC error counter=9871 -
Dear
We checked your firmware is not the latest ,you can upgrade to the below
https://service.bitmain.com/support/download?product=Antminer%20S9i
then clean the dust for the antminer to try
-
Hello,
I did the flashing of the card, then did the update.
Here are the screenshots and the Kernel Log.Otherwise, it always restarts about every 6min45s.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
[ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
[ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
[ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000293] ps7-ttc #0 at df804000, irq=43
[ 0.000595] Console: colour dummy device 80x30
[ 0.000625] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.090244] pid_max: default: 32768 minimum: 301
[ 0.090450] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090471] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.092624] CPU: Testing write buffer coherency: ok
[ 0.092930] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.092985] Setting up static identity map for 0x4cb118 - 0x4cb170
[ 0.093204] L310 cache controller enabled
[ 0.093225] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.170984] CPU1: Booted secondary processor
[ 0.260218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.260346] Brought up 2 CPUs
[ 0.260365] SMP: Total of 2 processors activated.
[ 0.260373] CPU: All CPU(s) started in SVC mode.
[ 0.261031] devtmpfs: initialized
[ 0.263462] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.264645] regulator-dummy: no parameters
[ 0.271981] NET: Registered protocol family 16
[ 0.274250] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.276516] cpuidle: using governor ladder
[ 0.276529] cpuidle: using governor menu
[ 0.283877] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.285391] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.285404] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.285514] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.306819] bio: create slab <bio-0> at 0
[ 0.308221] vgaarb: loaded
[ 0.308908] SCSI subsystem initialized
[ 0.309798] usbcore: registered new interface driver usbfs
[ 0.309967] usbcore: registered new interface driver hub
[ 0.310309] usbcore: registered new device driver usb
[ 0.310832] media: Linux media interface: v0.10
[ 0.310987] Linux video capture interface: v2.00
[ 0.311262] pps_core: LinuxPPS API ver. 1 registered
[ 0.311274] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.311395] PTP clock support registered
[ 0.311747] EDAC MC: Ver: 3.0.0
[ 0.312966] Advanced Linux Sound Architecture Driver Initialized.
[ 0.315696] DMA-API: preallocated 4096 debug entries
[ 0.315709] DMA-API: debugging enabled by kernel config
[ 0.315777] Switched to clocksource arm_global_timer
[ 0.336450] NET: Registered protocol family 2
[ 0.337100] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.337156] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.337241] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.337282] TCP: reno registered
[ 0.337299] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.337329] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.337557] NET: Registered protocol family 1
[ 0.337891] RPC: Registered named UNIX socket transport module.
[ 0.337903] RPC: Registered udp transport module.
[ 0.337911] RPC: Registered tcp transport module.
[ 0.337919] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.337931] PCI: CLS 0 bytes, default 64
[ 0.338356] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.340332] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.342362] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.342549] msgmni has been set to 967
[ 0.343309] io scheduler noop registered
[ 0.343322] io scheduler deadline registered
[ 0.343378] io scheduler cfq registered (default)
[ 0.355472] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.355492] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.478719] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.046025] console [ttyPS0] enabled
[ 1.050268] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.057877] [drm] Initialized drm 1.1.0 20060810
[ 1.074809] brd: module loaded
[ 1.084172] loop: module loaded
[ 1.093547] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.099369] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.107114] libphy: XEMACPS mii bus: probed
[ 1.111483] ------------- phy_id = 0x3625e62
[ 1.116420] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.125002] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.131832] ehci-pci: EHCI PCI platform driver
[ 1.139133] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.145951] usbcore: registered new interface driver usb-storage
[ 1.152774] mousedev: PS/2 mouse device common for all mice
[ 1.158884] i2c /dev entries driver
[ 1.165764] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.171282] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.177190] Xilinx Zynq CpuIdle Driver started
[ 1.182050] sdhci: Secure Digital Host Controller Interface driver
[ 1.188171] sdhci: Copyright(c) Pierre Ossman
[ 1.192484] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.199374] mmc0: no vqmmc regulator found
[ 1.203389] mmc0: no vmmc regulator found
[ 1.245802] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.254472] usbcore: registered new interface driver usbhid
[ 1.259995] usbhid: USB HID core driver
[ 1.264692] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.270983] nand: Micron MT29F2G08ABAEAWP
[ 1.274955] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.280911] Bad block table found at page 131008, version 0x01
[ 1.287154] Bad block table found at page 130944, version 0x01
[ 1.293207] 3 ofpart partitions found on MTD device pl353-nand
[ 1.298978] Creating 3 MTD partitions on "pl353-nand":
[ 1.304080] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.312123] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.319437] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.330132] TCP: cubic registered
[ 1.333372] NET: Registered protocol family 17
[ 1.338075] Registering SWP/SWPB emulation handler
[ 1.343939] regulator-dummy: disabling
[ 1.348253] UBI: attaching mtd1 to ubi0
[ 1.721387] UBI: scanning is finished
[ 1.733219] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.740298] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.747061] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.753726] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.760603] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.766584] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.773690] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1495195
[ 1.782473] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.791689] UBI: background thread "ubi_bgt0d" started, PID 1084
[ 1.791694] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.795593] ALSA device list:
[ 1.795596] No soundcards found.
[ 1.812436] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[ 1.906454] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.912380] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.921512] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.931396] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 1.936435] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 5738C7A7-BFF6-4ED2-9D03-AA7C4A93929C, small LPT model
[ 2.007588] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.029345] devtmpfs: mounted
[ 2.032451] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[ 3.146130] random: dd urandom read with 1 bits of entropy available
[ 3.745842]
[ 3.745842] bcm54xx_config_init
[ 4.805790]
[ 4.805790] bcm54xx_config_init
[ 8.806649] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 8.812758] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 23.386266] In axi fpga driver!
[ 23.389334] request_mem_region OK!
[ 23.392724] AXI fpga dev virtual address is 0xdf9fe000
[ 23.397861] *base_vir_addr = 0xc51e
[ 23.412465] In fpga mem driver!
[ 23.415731] request_mem_region OK!
[ 23.419347] fpga mem virtual address is 0xe2000000
[ 24.175797]
[ 24.175797] bcm54xx_config_init
[ 25.275825]
[ 25.275825] bcm54xx_config_init
[ 29.276658] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 29.282764] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 285.959419] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram: 507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fa8000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5da1000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912
main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 8158f50e75104814
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[26] has core num=2
main.c:9113: Chain[7] ASIC[43] has core num=1
main.c:9113: Chain[7] ASIC[44] has core num=1
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=108 on chain[5], value=880
main.c:9183: get PIC voltage=108 on chain[6], value=880
main.c:9183: get PIC voltage=91 on chain[7], value=890
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found=19513 root 0:00 grep bmminer
main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:26 CST 2019 type: Antminer S9i
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 8158f50e75104814
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4a 0x00 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x07 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J6] has backup chain_voltage=870
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4a 0x00 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x07 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=870
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J8] has backup chain_voltage=890
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=108 value=880
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J6] will use backup chain_voltage_pic=870 [125]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J6] get working chain_voltage_pic=125
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=108 value=880
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J7] will use backup chain_voltage_pic=870 [125]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J7] get working chain_voltage_pic=125
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=91 value=890
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 19 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 19 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 19 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 19 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 19 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 19 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 19 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 33 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 35 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 35 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 35 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 35 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 35 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 35 asic
driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4531:set_frequency: Chain[J7] has core num in PIC
driver-btm-c5.c:4531:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[26] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[43] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[44] has core num=1
driver-btm-c5.c:4571:set_frequency: miner total rate=13865GH/s ideal_total_hash_rate = 13500GH/s
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=650
driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=650
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4598:set_frequency: Chain:6 chipnum=19
driver-btm-c5.c:4618:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:6 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650
driver-btm-c5.c:4809:set_frequency: Chain:6 max freq=650
driver-btm-c5.c:4810:set_frequency: Chain:6 min freq=650
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4598:set_frequency: Chain:7 chipnum=35
driver-btm-c5.c:4618:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:7 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631
driver-btm-c5.c:4809:set_frequency: Chain:7 max freq=631
driver-btm-c5.c:4810:set_frequency: Chain:7 min freq=631
driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:4263:ProcessFixFreqForChips: totalRate = 13865, fixed_totalRate = 13635
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=650
driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=650
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4855:set_frequency: Chain:6 chipnum=19
driver-btm-c5.c:4874:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:6 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650
driver-btm-c5.c:5110:set_frequency: Chain:6 max freq=650
driver-btm-c5.c:5111:set_frequency: Chain:6 min freq=650
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4855:set_frequency: Chain:7 chipnum=35
driver-btm-c5.c:4874:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:7 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631
driver-btm-c5.c:5110:set_frequency: Chain:7 max freq=631
driver-btm-c5.c:5111:set_frequency: Chain:7 min freq=631
driver-btm-c5.c:5119:set_frequency: max freq = 650
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 13865, fixed_totalRate = 13500
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:18 remote:21 offset:26
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=26 typeID=55
driver-btm-c5.c:13651:bitmain_c5_init: single board rate=4668 voltage limit=880 on chain[5]
driver-btm-c5.c:13688:bitmain_c5_init: get PIC voltage=870 on chain[5], check: must be < 880
driver-btm-c5.c:13651:bitmain_c5_init: single board rate=4668 voltage limit=880 on chain[6]
driver-btm-c5.c:13688:bitmain_c5_init: get PIC voltage=870 on chain[6], check: must be < 880
driver-btm-c5.c:13651:bitmain_c5_init: single board rate=4529 voltage limit=890 on chain[7]
driver-btm-c5.c:13688:bitmain_c5_init: get PIC voltage=890 on chain[7], check: must be < 890
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 870
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 870
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=315 total_tv_end_sys=316
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = 36
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 4773.711017, ideal hash rate = 13500
driver-btm-c5.c:10387:check_system_work: hash rate is low...
driver-btm-c5.c:10363:check_system_work: re_open_core_times: 1
driver-btm-c5.c:15630:re_open_core: re_open_core enter
driver-btm-c5.c:15791:re_open_core: Chain[J6] has 63 asic
driver-btm-c5.c:15791:re_open_core: Chain[J7] has 19 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 0, dev->chain_asic_num[i] = 19
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 19 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 1, dev->chain_asic_num[i] = 19
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 69 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 2, dev->chain_asic_num[i] = 69
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 19 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 3, dev->chain_asic_num[i] = 19
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 19 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 4, dev->chain_asic_num[i] = 19
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 19 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 5, dev->chain_asic_num[i] = 19
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 19 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 6, dev->chain_asic_num[i] = 19
do read_temp_func once...
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=79.0370 Asic[02]=66.9570 Asic[03]=76.9230 Asic[04]=78.5000 Asic[05]=72.1250 Asic[06]=79.8590 Asic[07]=75.4130 Asic[08]=74.1380
Asic[09]=71.7050 Asic[10]=72.0070 Asic[11]=73.2320 Asic[12]=74.9100 Asic[13]=76.3190 Asic[14]=76.7050 Asic[15]=76.9730 Asic[16]=77.7790
Asic[17]=75.4470 Asic[18]=70.8160 Asic[19]=68.8700 Asic[20]=69.9100 Asic[21]=69.3570 Asic[22]=76.2180 Asic[23]=74.3060 Asic[24]=73.7860
Asic[25]=71.4870 Asic[26]=73.6850 Asic[27]=74.7920 Asic[28]=74.8090 Asic[29]=69.7420 Asic[30]=73.4170 Asic[31]=74.6250 Asic[32]=75.6650
Asic[33]=72.4270 Asic[34]=69.0550 Asic[35]=73.5680 Asic[36]=72.3090 Asic[37]=71.1850 Asic[38]=69.2560 Asic[39]=70.7150 Asic[40]=75.5470
Asic[41]=72.0580 Asic[42]=76.3860 Asic[43]=75.0940 Asic[44]=69.1890 Asic[45]=71.0680 Asic[46]=75.1280 Asic[47]=74.3900 Asic[48]=73.6010
Asic[49]=72.8800 Asic[50]=73.8860 Asic[51]=73.9370 Asic[52]=75.3120 Asic[53]=76.3860 Asic[54]=70.7150 Asic[55]=70.5310 Asic[56]=74.0370
Asic[57]=78.6850 Asic[58]=74.0710 Asic[59]=73.6680 Asic[60]=70.8500 Asic[61]=81.2350 Asic[62]=76.5540 Asic[63]=78.1310
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[1] junction temperature=61
Special fix Chain[5] Chip[1] middle Temp = 15
Done read temp on Chain[5]
Max pcb temp : 0
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=1780 -
Hello,
I tested with several new power supplies and still the same problem. I even tried one power supply per board and then 3 power supplies for one board.
I also changed the cables between hashboard and control board.
Maybe a problem with the control board?To my knowledge there is no company in France that repairs minors. Do you have any information about companies in France or in Europe?
-
Dear
Would you like to double check the below repair site
Bitmain’s Cooperative Repair Center in Russia
Recipient's Name: 3Logic Service СenterCompany's Name: New IT Project LLC.Address: 121059, Moscow, Berezhkovskaya nab., 20, p. 35.Tel: +7 (495) 207-75-57, ext.297Working Hours: Monday-Thursday: 10:00-18:00；Friday: 10:00-16:00NOTES: 1. Bitmain's Cooperative Repair Center will be considered as an independent Repair Service Provider and not as an agent or part of the Bitmain's organization. If any disputes arising from maintenance service from Cooperative Repair Center, please directly negotiate with the Cooperative Repair Center to resolve.
2. The products repaired by the Cooperative Repair Center will enjoy the follow-up warranty service provided by the Cooperative Repair Center, and the product's official warranty from Bitmain will be invalid.
3. No matter whether the product is within the official warranty period, the Cooperative Repair Center will charge the maintenance service fee. You do not need to create a repair ticket on the Bitmain's official website. For more information, please consult with the Cooperative Repair Center directly.
4. Please contact the Cooperative Repair Center directly before sending products for repairing to avoid any delay in maintenance.
Please sign in to leave a comment.
Comments
19 comments