s17+ not coming up

Answered

Comments

8 comments

  • Official comment

    Dear

    For the ERROR_SOC_INIT issue , could you try to exclude the issue by the below ways firstly 


    1 Check the power line,plug it and unplug it to test

    2 restore to the factory settings,

    3  manually configure the miner configuration

    4  flash the sd card file to recover to the control board 

     

    Comment actions Permalink

    hi team, 

    tried what you supposed, still the same problem.

     

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12904K (cce67000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAGAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 15/7, WL threshold: 4096, image sequence number: 237714726
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): recovery needed
    UBIFS (ubi0:0): recovery completed
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 2246/497, WL threshold: 4096, image sequence number: 3265111179
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): recovery needed
    UBIFS (ubi1:0): recovery completed
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1AF6F1E1-61F0-462C-AE44-C7D9596CF7E2, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xb023
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    2021-05-12 23:46:50 driver-btm-api.c:779:init_freq_mode: This is scan-user version
    2021-05-12 23:46:50 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version = 1
    2021-05-12 23:46:50 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab = 1
    2021-05-12 23:46:50 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0
    2021-05-12 23:46:50 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun 2 10:31:07 CST 2020 type: Antminer S17+
    2021-05-12 23:46:50 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21
    2021-05-12 23:46:50 driver-btm-api.c:2083:show_sn: len:16, 8052cc042b10481c
    2021-05-12 23:46:50 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1
    2021-05-12 23:46:50 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1
    2021-05-12 23:46:50 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 8052cc042b10481c
    2021-05-12 23:46:50 fan.c:284:front_fan_power_on: Note: front fan is power on!
    2021-05-12 23:46:50 fan.c:296:rear_fan_power_on: Note: rear fan is power on!
    2021-05-12 23:46:50 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX
    2021-05-12 23:46:50 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0 fan_pwm : 0
    2021-05-12 23:46:56 driver-btm-api.c:1239:init_miner_version: miner ID : 8052cc042b10481c
    2021-05-12 23:46:56 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
    2021-05-12 23:47:01 driver-btm-api.c:837:get_product_id: product_id[0] = 0
    2021-05-12 23:47:01 driver-btm-api.c:837:get_product_id: product_id[1] = 0
    2021-05-12 23:47:01 driver-btm-api.c:837:get_product_id: product_id[2] = 0
    2021-05-12 23:47:01 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled
    2021-05-12 23:47:01 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.
    2021-05-12 23:47:01 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
    2021-05-12 23:47:01 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
    2021-05-12 23:47:01 thread.c:1363:create_read_nonce_reg_thread: create thread
    2021-05-12 23:47:07 driver-btm-api.c:1239:init_miner_version: miner ID : 8052cc042b10481c
    2021-05-12 23:47:07 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
    2021-05-12 23:47:13 driver-btm-api.c:837:get_product_id: product_id[0] = 0
    2021-05-12 23:47:13 driver-btm-api.c:837:get_product_id: product_id[1] = 0
    2021-05-12 23:47:13 driver-btm-api.c:837:get_product_id: product_id[2] = 0
    2021-05-12 23:47:13 driver-btm-api.c:792:_set_project_type: project:0
    2021-05-12 23:47:13 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+
    2021-05-12 23:47:13 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
    2021-05-12 23:47:13 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
    2021-05-12 23:47:13 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
    2021-05-12 23:47:13 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
    2021-05-12 23:47:13 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
    2021-05-12 23:47:13 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
    2021-05-12 23:47:15 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.
    2021-05-12 23:47:16 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
    2021-05-12 23:47:18 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
    2021-05-12 23:47:19 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2021-05-12 23:47:21 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
    2021-05-12 23:47:22 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2021-05-12 23:47:24 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
    2021-05-12 23:47:24 thread.c:1358:create_pic_heart_beat_thread: create thread
    2021-05-12 23:47:24 power_api.c:213:power_init: Power init:
    2021-05-12 23:47:24 power_api.c:214:power_init: current_voltage_raw = 0
    2021-05-12 23:47:24 power_api.c:215:power_init: highest_voltage_raw = 2100
    2021-05-12 23:47:24 power_api.c:216:power_init: working_voltage_raw = 1950
    2021-05-12 23:47:24 power_api.c:217:power_init: higher_voltage_raw = 2040
    2021-05-12 23:47:24 power_api.c:218:power_init: check_asic_voltage_raw = 2100
    2021-05-12 23:47:24 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.
    2021-05-12 23:47:24 power_api.c:186:power_off: init gpio907
    2021-05-12 23:47:56 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
    2021-05-12 23:48:22 power_api.c:85:check_voltage_multi: retry time: 0
    2021-05-12 23:48:23 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.138107
    2021-05-12 23:48:24 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.092188
    2021-05-12 23:48:25 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.238155
    2021-05-12 23:48:25 power_api.c:53:_get_avg_voltage: average_voltage = 21.156150
    2021-05-12 23:48:25 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.16, check voltage passed.
    2021-05-12 23:48:25 uart.c:72:set_baud: set fpga_baud to 115200
    2021-05-12 23:48:36 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
    2021-05-12 23:48:47 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0
    2021-05-12 23:48:58 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 22 asic, times 0
    2021-05-12 23:49:09 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 1
    2021-05-12 23:49:17 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
    2021-05-12 23:49:18 driver-btm-api.c:435:set_order_clock: chain[0]: set order clock, stragegy 3
    2021-05-12 23:49:18 driver-btm-api.c:435:set_order_clock: chain[1]: set order clock, stragegy 3
    2021-05-12 23:49:18 driver-btm-api.c:435:set_order_clock: chain[2]: set order clock, stragegy 3
    2021-05-12 23:49:18 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
    2021-05-12 23:49:18 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6
    2021-05-12 23:49:21 register.c:1572:quick_dump_core_hash_clock_counter: bad clock counter. chain = 0, asic = 9, core = 0, found 0, clock counter 0x00000000
    2021-05-12 23:49:21 driver-btm-api.c:2404:bitmain_board_init: clock counter status was not good. Try reset.
    2021-05-12 23:49:21 voltage[0] = 1940
    2021-05-12 23:49:21 voltage[1] = 1920
    2021-05-12 23:49:21 voltage[2] = 1920
    2021-05-12 23:49:21 Voltage are different. Will exit.
    2021-05-12 23:49:21 driver-btm-api.c:222:set_miner_status: ERROR_SOC_INIT
    2021-05-12 23:49:21 driver-btm-api.c:156:stop_mining: stop mining: soc init failed!
    2021-05-12 23:49:21 thread.c:1403:cancel_read_nonce_reg_thread: cancel thread
    2021-05-12 23:49:21 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****

    0
    Comment actions Permalink
  • 0
    Comment actions Permalink

    hi again,

    loaded with sd SD_S17+.rar -

    all 3 boards recognized, bit cannot save minin pool - in system tab it says in red mp test software.
    which other firmware i should load now ??

    here the kernel.log  with mp testing firmware

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203656K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25720K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12680K (cce9e000 - cdb00000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAGAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1305926390
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 709
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 712
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FBCE5D49-386A-45E5-8DDE-378844243382, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 2246/497, WL threshold: 4096, image sequence number: 3265111179
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 721
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 724
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1AF6F1E1-61F0-462C-AE44-C7D9596CF7E2, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xb023
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    2021-05-13 13:55:26 driver-btm-api.c:636:init_freq_mode: This is fix-freq version
    2021-05-13 13:55:26 driver-btm-api.c:1815:bitmain_soc_init: opt_multi_version = 1
    2021-05-13 13:55:26 driver-btm-api.c:1816:bitmain_soc_init: opt_bitmain_ab = 1
    2021-05-13 13:55:26 driver-btm-api.c:1817:bitmain_soc_init: opt_bitmain_work_mode = 0
    2021-05-13 13:55:26 driver-btm-api.c:1818:bitmain_soc_init: Miner compile time: Mon Nov 18 15:50:53 CST 2019 type: Antminer S17+
    2021-05-13 13:55:26 driver-btm-api.c:1819:bitmain_soc_init: commit version: de03f5d 2019-11-18 10:20:31, build by: huangwei 2019-11-18 15:20:36
    2021-05-13 13:55:26 driver-btm-api.c:1670:show_sn: 8052cc042b10481c
    2021-05-13 13:55:26 fan.c:236:front_fan_power_on: Note: front fan is power on!
    2021-05-13 13:55:26 fan.c:248:rear_fan_power_on: Note: rear fan is power on!
    2021-05-13 13:55:26 driver-btm-api.c:1110:miner_device_init: Detect 256MB control board of XILINX
    2021-05-13 13:55:26 driver-btm-api.c:1058:init_fan_parameter: fan_eft : 0 fan_pwm : 100
    2021-05-13 13:55:26 driver-btm-api.c:307:init_dev_frequency: fixd frequency is 550
    2021-05-13 13:55:26 thread.c:731:create_read_nonce_reg_thread: create thread
    2021-05-13 13:55:32 driver-btm-api.c:1042:init_miner_version: miner ID : 8052cc042b10481c
    2021-05-13 13:55:32 driver-btm-api.c:1048:init_miner_version: FPGA Version = 0xB023
    0x0000 97 13 01 00 46 58 44 5A 59 48 37 42 4A 4A 42 42
    0x0010 48 31 46 52 31 00 00 00 00 01 00 01 01 00 D9 59
    0x0020 01 08 02 01 4C 03 C4 B2 97 13 76 72 78 72 76 72
    0x0030 72 76 78 76 76 72 78 76 72 72 76 76 72 78 76 78
    0x0040 76 72 72 72 76 78 72 76 76 78 72 72 76 72 76 72
    0x0050 78 76 76 76 78 72 72 76 72 72 78 76 72 72 76 78
    0x0060 76 76 78 76 72 72 72 78 76 72 76 94 07 27 61 00
    0x0070 00 01 00 00 26 CE FF FF FF FF FF FF FF FF FF FF
    0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    fixture_header : 0x1397
    fixture_version : 0x0001
    hash_board_sn : FXDZYH7BJJBBH1FR1
    pcb_version : 0x0100
    bom_version : 0x0100
    temp_sensor_type : TMP451
    product_id : 0x00
    cgminer_header : 0x1397
    project_type : S17+

    [Work Mode 0]:
    IC[00]:590 IC[01]:570 IC[02]:600 IC[03]:570 IC[04]:590
    IC[05]:570 IC[06]:570 IC[07]:590 IC[08]:600 IC[09]:590
    IC[10]:590 IC[11]:570 IC[12]:600 IC[13]:590 IC[14]:570
    IC[15]:570 IC[16]:590 IC[17]:590 IC[18]:570 IC[19]:600
    IC[20]:590 IC[21]:600 IC[22]:590 IC[23]:570 IC[24]:570
    IC[25]:570 IC[26]:590 IC[27]:600 IC[28]:570 IC[29]:590
    IC[30]:590 IC[31]:600 IC[32]:570 IC[33]:570 IC[34]:590
    IC[35]:570 IC[36]:590 IC[37]:570 IC[38]:600 IC[39]:590
    IC[40]:590 IC[41]:590 IC[42]:600 IC[43]:570 IC[44]:570
    IC[45]:590 IC[46]:570 IC[47]:570 IC[48]:600 IC[49]:590
    IC[50]:570 IC[51]:570 IC[52]:590 IC[53]:600 IC[54]:590
    IC[55]:590 IC[56]:600 IC[57]:590 IC[58]:570 IC[59]:570
    IC[60]:570 IC[61]:600 IC[62]:590 IC[63]:570 IC[64]:590
    voltage: 1940
    hash_rate: 24871
    is_valid: 1

    chip bin: BIN1, chip ft: A8V2, chip version: 1, pt2 class level: L3
    2021-05-13 13:55:34 eeprom.c:471:eeprom_load: Chain 0 load success.
    0x0000 97 13 01 00 46 58 44 5A 59 48 37 41 49 41 41 41
    0x0010 49 30 30 47 58 00 00 00 00 01 00 01 01 00 C4 31
    0x0020 01 08 02 01 4C 02 05 72 97 13 7A 76 7A 7A 7A 7A
    0x0030 7A 76 7A 7A 76 7A 7A 7A 7A 7A 7A 7A 76 7A 7A 7A
    0x0040 76 7A 7A 7A 7A 7A 7A 76 76 7A 7A 7A 7A 7A 7A 7A
    0x0050 76 7A 7A 76 7A 7A 7A 7A 7A 7A 7A 76 7A 7A 7A 7A
    0x0060 76 7A 7A 7A 7A 76 76 7A 7A 7A 7A 80 07 D0 64 00
    0x0070 00 01 00 00 23 AE FF FF FF FF FF FF FF FF FF FF
    0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    fixture_header : 0x1397
    fixture_version : 0x0001
    hash_board_sn : FXDZYH7AIAAAI00GX
    pcb_version : 0x0100
    bom_version : 0x0100
    temp_sensor_type : TMP451
    product_id : 0x00
    cgminer_header : 0x1397
    project_type : S17+

    [Work Mode 0]:
    IC[00]:610 IC[01]:590 IC[02]:610 IC[03]:610 IC[04]:610
    IC[05]:610 IC[06]:610 IC[07]:590 IC[08]:610 IC[09]:610
    IC[10]:590 IC[11]:610 IC[12]:610 IC[13]:610 IC[14]:610
    IC[15]:610 IC[16]:610 IC[17]:610 IC[18]:590 IC[19]:610
    IC[20]:610 IC[21]:610 IC[22]:590 IC[23]:610 IC[24]:610
    IC[25]:610 IC[26]:610 IC[27]:610 IC[28]:610 IC[29]:590
    IC[30]:590 IC[31]:610 IC[32]:610 IC[33]:610 IC[34]:610
    IC[35]:610 IC[36]:610 IC[37]:610 IC[38]:590 IC[39]:610
    IC[40]:610 IC[41]:590 IC[42]:610 IC[43]:610 IC[44]:610
    IC[45]:610 IC[46]:610 IC[47]:610 IC[48]:610 IC[49]:590
    IC[50]:610 IC[51]:610 IC[52]:610 IC[53]:610 IC[54]:590
    IC[55]:610 IC[56]:610 IC[57]:610 IC[58]:610 IC[59]:590
    IC[60]:590 IC[61]:610 IC[62]:610 IC[63]:610 IC[64]:610
    voltage: 1920
    hash_rate: 25808
    is_valid: 1

    chip bin: BIN1, chip ft: A8V2, chip version: 1, pt2 class level: L2
    2021-05-13 13:55:36 eeprom.c:471:eeprom_load: Chain 1 load success.
    0x0000 97 13 01 00 46 58 44 5A 59 48 37 41 49 41 41 41
    0x0010 49 30 30 47 58 00 00 00 00 01 00 01 01 00 C4 31
    0x0020 01 08 02 01 4C 02 05 72 97 13 7A 76 7A 7A 7A 7A
    0x0030 7A 76 7A 7A 76 7A 7A 7A 7A 7A 7A 7A 76 7A 7A 7A
    0x0040 76 7A 7A 7A 7A 7A 7A 76 76 7A 7A 7A 7A 7A 7A 7A
    0x0050 76 7A 7A 76 7A 7A 7A 7A 7A 7A 7A 76 7A 7A 7A 7A
    0x0060 76 7A 7A 7A 7A 76 76 7A 7A 7A 7A 80 07 D0 64 00
    0x0070 00 01 00 00 23 AE FF FF FF FF FF FF FF FF FF FF
    0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    fixture_header : 0x1397
    fixture_version : 0x0001
    hash_board_sn : FXDZYH7AIAAAI00GX
    pcb_version : 0x0100
    bom_version : 0x0100
    temp_sensor_type : TMP451
    product_id : 0x00
    cgminer_header : 0x1397
    project_type : S17+

    [Work Mode 0]:
    IC[00]:610 IC[01]:590 IC[02]:610 IC[03]:610 IC[04]:610
    IC[05]:610 IC[06]:610 IC[07]:590 IC[08]:610 IC[09]:610
    IC[10]:590 IC[11]:610 IC[12]:610 IC[13]:610 IC[14]:610
    IC[15]:610 IC[16]:610 IC[17]:610 IC[18]:590 IC[19]:610
    IC[20]:610 IC[21]:610 IC[22]:590 IC[23]:610 IC[24]:610
    IC[25]:610 IC[26]:610 IC[27]:610 IC[28]:610 IC[29]:590
    IC[30]:590 IC[31]:610 IC[32]:610 IC[33]:610 IC[34]:610
    IC[35]:610 IC[36]:610 IC[37]:610 IC[38]:590 IC[39]:610
    IC[40]:610 IC[41]:590 IC[42]:610 IC[43]:610 IC[44]:610
    IC[45]:610 IC[46]:610 IC[47]:610 IC[48]:610 IC[49]:590
    IC[50]:610 IC[51]:610 IC[52]:610 IC[53]:610 IC[54]:590
    IC[55]:610 IC[56]:610 IC[57]:610 IC[58]:610 IC[59]:590
    IC[60]:590 IC[61]:610 IC[62]:610 IC[63]:610 IC[64]:610
    voltage: 1920
    hash_rate: 25808
    is_valid: 1

    chip bin: BIN1, chip ft: A8V2, chip version: 1, pt2 class level: L2
    2021-05-13 13:55:38 eeprom.c:471:eeprom_load: Chain 2 load success.
    2021-05-13 13:55:38 driver-btm-api.c:689:get_product_id: product_id[0] = 0
    2021-05-13 13:55:38 driver-btm-api.c:689:get_product_id: product_id[1] = 0
    2021-05-13 13:55:38 driver-btm-api.c:689:get_product_id: product_id[2] = 0
    2021-05-13 13:55:38 eeprom.c:405:_eeprom_get_project_type: Chain 0 project type is S17+.
    2021-05-13 13:55:38 eeprom.c:405:_eeprom_get_project_type: Chain 1 project type is S17+.
    2021-05-13 13:55:38 eeprom.c:405:_eeprom_get_project_type: Chain 2 project type is S17+.
    2021-05-13 13:55:38 driver-btm-api.c:645:_set_project_type: project:0
    2021-05-13 13:55:38 driver-btm-api.c:665:_set_project_type: Project type: Antminer S17+
    2021-05-13 13:55:38 driver-btm-api.c:676:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
    2021-05-13 13:55:38 driver-btm-api.c:677:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
    2021-05-13 13:55:38 driver-btm-api.c:676:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
    2021-05-13 13:55:38 driver-btm-api.c:677:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
    2021-05-13 13:55:38 driver-btm-api.c:676:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
    2021-05-13 13:55:38 driver-btm-api.c:677:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
    2021-05-13 13:55:42 driver-btm-api.c:1764:bitmain_board_init: Fan check passed.
    2021-05-13 13:55:43 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
    2021-05-13 13:55:45 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
    2021-05-13 13:55:46 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2021-05-13 13:55:48 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
    2021-05-13 13:55:49 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2021-05-13 13:55:51 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
    2021-05-13 13:55:51 thread.c:726:create_pic_heart_beat_thread: create thread
    2021-05-13 13:55:51 power_api.c:208:power_init: Power init:
    2021-05-13 13:55:51 power_api.c:209:power_init: current_voltage_raw = 0
    2021-05-13 13:55:51 power_api.c:210:power_init: highest_voltage_raw = 2100
    2021-05-13 13:55:51 power_api.c:211:power_init: working_voltage_raw = 1950
    2021-05-13 13:55:51 power_api.c:212:power_init: higher_voltage_raw = 2040
    2021-05-13 13:55:51 driver-btm-api.c:1774:bitmain_board_init: Enter 30s sleep to make sure power release finish.
    2021-05-13 13:55:51 power_api.c:182:power_off: init gpio907
    2021-05-13 13:56:23 power_api.c:262:set_to_highest_voltage: Set to voltage raw 2100, one step.
    2021-05-13 13:56:25 power_api.c:83:check_voltage_multi: retry time: 0
    2021-05-13 13:56:26 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 21.165172
    2021-05-13 13:56:27 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 21.067861
    2021-05-13 13:56:28 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 21.241026
    2021-05-13 13:56:28 power_api.c:51:_get_avg_voltage: average_voltage = 21.158019
    2021-05-13 13:56:28 power_api.c:69:check_voltage: target_vol = 21.00, actural_vol = 21.16, check voltage passed.
    2021-05-13 13:56:28 uart.c:71:set_baud: set fpga_baud to 115200
    2021-05-13 13:56:28 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
    2021-05-13 13:56:28 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
    2021-05-13 13:56:28 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
    2021-05-13 13:56:40 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
    2021-05-13 13:56:51 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0
    2021-05-13 13:57:02 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
    2021-05-13 13:57:10 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
    2021-05-13 13:57:10 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3
    2021-05-13 13:57:10 driver-btm-api.c:352:set_order_clock: chain[1]: set order clock, stragegy 3
    2021-05-13 13:57:10 driver-btm-api.c:352:set_order_clock: chain[2]: set order clock, stragegy 3
    2021-05-13 13:57:10 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
    2021-05-13 13:57:10 power_api.c:220:set_working_voltage_raw: working_voltage_raw = 1950
    2021-05-13 13:57:10 driver-btm-api.c:540:init_working_voltage: set fixed voltage raw to 1950
    2021-05-13 13:57:11 temperature.c:314:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
    2021-05-13 13:57:13 temperature.c:314:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
    2021-05-13 13:57:14 temperature.c:314:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
    2021-05-13 13:57:14 uart.c:71:set_baud: set fpga_baud to 12000000
    2021-05-13 13:57:14 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 12000000, chip_divider = 3
    2021-05-13 13:57:14 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[1]: chip baud = 12000000, chip_divider = 3
    2021-05-13 13:57:14 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[2]: chip baud = 12000000, chip_divider = 3
    2021-05-13 13:57:15 driver-btm-api.c:241:check_bringup_temp: Bring up temperature is 28
    2021-05-13 13:57:15 thread.c:746:create_check_miner_status_thread: create thread
    2021-05-13 13:57:15 thread.c:736:create_show_miner_status_thread: create thread
    2021-05-13 13:57:15 thread.c:721:create_temperature_monitor_thread: create thread
    2021-05-13 13:57:15 frequency.c:770:inc_freq_with_fixed_vco: chain = 255, freq = 550, is_higher_voltage = true
    2021-05-13 13:57:15 power_api.c:346:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
    2021-05-13 13:57:17 power_api.c:83:check_voltage_multi: retry time: 0
    2021-05-13 13:57:18 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.965516
    2021-05-13 13:57:19 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 20.895141
    2021-05-13 13:57:20 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 21.092188
    2021-05-13 13:57:20 power_api.c:51:_get_avg_voltage: average_voltage = 20.984282
    2021-05-13 13:57:20 power_api.c:69:check_voltage: target_vol = 20.90, actural_vol = 20.98, check voltage passed.
    2021-05-13 13:57:31 driver-btm-api.c:618:set_timeout: freq = 550, percent = 90, hcn = 44236, timeout = 80
    2021-05-13 13:57:31 power_api.c:304:set_to_working_voltage_by_steps: Set to voltage raw 1950, step by step.
    2021-05-13 13:57:36 power_api.c:83:check_voltage_multi: retry time: 0
    2021-05-13 13:57:37 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 19.533843
    2021-05-13 13:57:38 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 19.485933
    2021-05-13 13:57:39 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 19.656849
    2021-05-13 13:57:39 power_api.c:51:_get_avg_voltage: average_voltage = 19.558875
    2021-05-13 13:57:39 power_api.c:69:check_voltage: target_vol = 19.50, actural_vol = 19.56, check voltage passed.
    2021-05-13 13:57:39 thread.c:741:create_check_system_status_thread: create thread
    2021-05-13 13:57:40 driver-btm-api.c:1919:bitmain_soc_init: Init done!
    2021-05-13 13:57:40 driver-btm-api.c:194:set_miner_status: STATUS_INIT
    2021-05-13 13:57:45 driver-btm-api.c:194:set_miner_status: STATUS_OKAY
    2021-05-13 13:57:46 frequency.c:129:get_ideal_hash_rate_GH: ideal_hash_rate = 72072
    2021-05-13 13:57:46 frequency.c:145:get_sale_hash_rate_GH: sale_hash_rate = 70000
    2021-05-13 13:57:51 driver-btm-api.c:1292:dhash_chip_send_job: Version num 4

    thanks

    hk

     

    0
    Comment actions Permalink

    0
    Comment actions Permalink
    0
    Comment actions Permalink

    thanks for your feedback

     

    0
    Comment actions Permalink

    Dear

    Please upgrade to the latest firmware to remove the red words firstly 

    https://service.bitmain.com/support/download?product=Antminer%20S17%2B

     

    0
    Comment actions Permalink

Please sign in to leave a comment.