Antminer T17 58T + Hashboard Faill

Answered

Follow

alimahmoodi22

• April 04, 2021 07:09

i have 8 antminer t17+ and one of them after only one month work cant recognize one hashboard .

in log cgminer says 0 asics find it must be 44 .

but when turn of miner and unplug power cord for more than 20 min after turn on t17 everythings works fine work with 3 hashboard no drop hashrate no rejection more than 0.05% no high temp hashrate reach 61Th and all hashboard over 20th easly

temps stable on 45C on board and 74c 75c on chipset but after 2 days working cgminer restarts and hashboard droped again and after restart during initialize cg miner say again 

0 asics find on hashboard and i must do the cycle again.

problem due to bad hashboard ??!! no fail no high temp no rejection rate ....

problem with PSU?? ill test hashboard alone but no success..

 

 

0

• 

  张衬峰

  • April 05, 2021 02:09

  Hello!
  You can try to clean up the dust of the hashboard, if it still can't recover, it may be a failure of the operation board and can only be repaired and dealt with.

  0

  Comment actions Permalink

Please sign in to leave a comment.