Antiminer T17E 53th not hashing

Answered

Comments

6 comments

    driver-btm-api.c:1217:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1

    0
    Comment actions Permalink
    Hello friend! I often face this kind of problem. All 3 hash boards are out of order. This can be seen in the log. You need to re-solder the chips and the problem can be solved. You cannot overheat the 17 series miners. The chips are unsoldered and the board becomes 0 asic
    0
    Comment actions Permalink

    But the chip on the hashboard are all in place. You sure I need to re-solder them all ?

    0
    Comment actions Permalink

    Hello.
    The log shows that no chip has been detected on any of the three boards. You can take apart the machine and check whether the radiator of the board has fallen off or not. If there is any dust, clean it up and try it. If there are still any problems, it is recommended to repair and deal with it.

    0
    Comment actions Permalink

    Cravens, you need to find the chips through which the signal does not pass and solder them. I recommend contacting the service center to repair hash boards

    0
    Comment actions Permalink

    Ok How to test hashboard?

    0
    Comment actions Permalink

Please sign in to leave a comment.